All MIBs › CM-FACILITY-MIB › cmEthernetTrafficPortIngressPopPriorityVidEnabled
cmEthernetTrafficPortIngressPopPriorityVidEnabled
Module: CM-FACILITY-MIB
OID (symbolic): CM-FACILITY-MIB::cmEthernetTrafficPortIngressPopPriorityVidEnabled
OID (numeric): 1.3.6.1.4.1.2544.1.12.4.1.27.1.110
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: This object defines the Ingress PopPriorityVid enable or disable of the port. If it is enabled, then incoming priority tagged packet's VID is swapped to Priority VLAN ID.
This attribute has been deprecated and is supported only on EG-X. Please use cmEthernetTrafficPortIngressSwapPriorityVIDEnabled
What is cmEthernetTrafficPortIngressPopPriorityVidEnabled?
This deprecated TruthValue enables Ingress Pop Priority VID behavior, where, when on, an incoming priority-tagged packet's VID gets swapped to the configured Priority VLAN ID rather than left as-is; it is supported only on EG-X hardware. An administrator would have used it to normalize priority-tagged ingress traffic into a single designated priority VLAN on older EG-X cards. For example, a legacy EG-X deployment migrating configurations should move to cmEthernetTrafficPortIngressSwapPriorityVIDEnabled since this object is kept only for compatibility.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.4.1.27.1.110 snmpwalk -v2c -c public <target> CM-FACILITY-MIB::cmEthernetTrafficPortIngressPopPriorityVidEnabled
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.4.1.27.1.110.1 snmpget -v2c -c public <target> CM-FACILITY-MIB::cmEthernetTrafficPortIngressPopPriorityVidEnabled.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2544.1.12.4.1.27.1.110.1 s <value>
Start monitoring ADVA/Ceragon FSP150 CM/CC (F3) microwave & Carrier Ethernet transport platform with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CM-FACILITY-MIB::cmEthernetTrafficPortIngressPopPriorityVidEnabled OID value, configure state conditions and alerts, and monitor any ADVA/Ceragon FSP150 CM/CC (F3) microwave & Carrier Ethernet transport platform from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2544 | advaMIB | ADVA-MIB |
| 1.3.6.1.4.1.2544.1 | products | ADVA-MIB |
| 1.3.6.1.4.1.2544.1.12 | fsp150cm | ADVA-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2544.1.12.4 | cmFacilityMIB | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1 | cmFacilityObjects | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.27 | cmEthernetTrafficPortTable | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1 | cmEthernetTrafficPortEntry | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.110 | cmEthernetTrafficPortIngressPopPriorityVidEnabled | CM-FACILITY-MIB |