All MIBs › CM-FACILITY-MIB › cmEthernetTrafficPortOuterVlanLoopback3
cmEthernetTrafficPortOuterVlanLoopback3
Module: CM-FACILITY-MIB
OID (symbolic): CM-FACILITY-MIB::cmEthernetTrafficPortOuterVlanLoopback3
OID (numeric): 1.3.6.1.4.1.2544.1.12.4.1.27.1.28
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description: This object allows specification of the outer VLAN 3 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetTrafficPortOuterVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
What is cmEthernetTrafficPortOuterVlanLoopback3?
cmEthernetTrafficPortOuterVlanLoopback3 is a read-write string specifying the outer VLAN 3 value to be looped back when the port is in VLAN loopback configuration, valid only if the corresponding bit in the loopback mask is set. An administrator uses this third and final slot to round out testing of up to three distinct VLANs on the same port without disturbing the other two loopback slots' configuration. For example, a port carrying three separate customer VLANs that all need individual turn-up testing would have each VLAN's ID recorded across this and the two preceding loopback objects.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.4.1.27.1.28 snmpwalk -v2c -c public <target> CM-FACILITY-MIB::cmEthernetTrafficPortOuterVlanLoopback3
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.4.1.27.1.28.1 snmpget -v2c -c public <target> CM-FACILITY-MIB::cmEthernetTrafficPortOuterVlanLoopback3.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2544.1.12.4.1.27.1.28.1 s <value>
Start monitoring ADVA/Ceragon FSP150 CM/CC (F3) microwave & Carrier Ethernet transport platform with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CM-FACILITY-MIB::cmEthernetTrafficPortOuterVlanLoopback3 OID value, configure state conditions and alerts, and monitor any ADVA/Ceragon FSP150 CM/CC (F3) microwave & Carrier Ethernet transport platform from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2544 | advaMIB | ADVA-MIB |
| 1.3.6.1.4.1.2544.1 | products | ADVA-MIB |
| 1.3.6.1.4.1.2544.1.12 | fsp150cm | ADVA-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2544.1.12.4 | cmFacilityMIB | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1 | cmFacilityObjects | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.27 | cmEthernetTrafficPortTable | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1 | cmEthernetTrafficPortEntry | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.28 | cmEthernetTrafficPortOuterVlanLoopback3 | CM-FACILITY-MIB |