All MIBs › CM-FACILITY-MIB › e1t1LoopbackProfile
e1t1LoopbackProfile
Module: CM-FACILITY-MIB
OID (symbolic): CM-FACILITY-MIB::e1t1LoopbackProfile
OID (numeric): 1.3.6.1.4.1.2544.1.12.4.1.50.1.21
Node type: OBJECT-TYPE
Type: VariablePointer
Access: read-write
Description:
This object allows selecting Loopback Profile for the E1/T1 interface. Loopback Profile is represented by an object in the f3Pwe3LoopbackProfileTable
What is e1t1LoopbackProfile?
Points to a configuration profile that defines loopback test settings for E1/T1 phone lines. Allows technicians to select which loopback mode to use when testing line quality locally without sending traffic over the network. A field engineer would configure this before running a loopback test to validate a circuit's physical integrity.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.4.1.50.1.21 snmpwalk -v2c -c public <target> CM-FACILITY-MIB::e1t1LoopbackProfile
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.4.1.50.1.21.1 snmpget -v2c -c public <target> CM-FACILITY-MIB::e1t1LoopbackProfile.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2544.1.12.4.1.50.1.21.1 s <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.2544 | advaMIB | ADVA-MIB |
| 1.3.6.1.4.1.2544.1 | products | ADVA-MIB |
| 1.3.6.1.4.1.2544.1.12 | fsp150cm | ADVA-MIB |
| 1.3.6.1.4.1.2544.1.12.4 | cmFacilityMIB | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1 | cmFacilityObjects | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.50 | e1t1Table | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.50.1 | e1t1Entry | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.50.1.21 | e1t1LoopbackProfile | CM-FACILITY-MIB |