CM-FACILITY-MIB :: cmEthernetNetPortShapedSpeedHi

MIB Reference — IPNetwork Monitor

All MIBsCM-FACILITY-MIBcmEthernetNetPortShapedSpeedHi

cmEthernetNetPortShapedSpeedHi

Module: CM-FACILITY-MIB

OID (symbolic): CM-FACILITY-MIB::cmEthernetNetPortShapedSpeedHi

OID (numeric): 1.3.6.1.4.1.2544.1.12.4.1.7.1.76

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description:

This object allows to specify the higher 32 bits of the Network Port Shaped speed. This value is applicable when cmEthernetNetPortShapingEnabled is enabled.

What is cmEthernetNetPortShapedSpeedHi?

This setting specifies the upper 32 bits of a 64-bit traffic rate limit on a network port when traffic shaping is enabled. It defines the maximum bandwidth allowed on the port. An operator would configure this to enforce traffic speed limits (e.g., capping a customer's internet connection to 100 Mbps).

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.4.1.7.1.76
snmpwalk -v2c -c public <target> CM-FACILITY-MIB::cmEthernetNetPortShapedSpeedHi

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.4.1.7.1.76.1
snmpget -v2c -c public <target> CM-FACILITY-MIB::cmEthernetNetPortShapedSpeedHi.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2544.1.12.4.1.7.1.76.1 i <value>

OID Breakdown

Numeric OIDNameModule
1isoLANART-AGENT
1.3orgBIANCA-BRICK-PPP-MIB
1.3.6dodBIANCA-BRICK-PPP-MIB
1.3.6.1internetBIANCA-BRICK-PPP-MIB
1.3.6.1.4privateBIANCA-BRICK-PPP-MIB
1.3.6.1.4.1enterprisesANIROOT-MIB
1.3.6.1.4.1.2544advaMIBADVA-MIB
1.3.6.1.4.1.2544.1productsADVA-MIB
1.3.6.1.4.1.2544.1.12fsp150cmADVA-MIB
1.3.6.1.4.1.2544.1.12.4cmFacilityMIBCM-FACILITY-MIB
1.3.6.1.4.1.2544.1.12.4.1cmFacilityObjectsCM-FACILITY-MIB
1.3.6.1.4.1.2544.1.12.4.1.7cmEthernetNetPortTableCM-FACILITY-MIB
1.3.6.1.4.1.2544.1.12.4.1.7.1cmEthernetNetPortEntryCM-FACILITY-MIB
1.3.6.1.4.1.2544.1.12.4.1.7.1.76cmEthernetNetPortShapedSpeedHiCM-FACILITY-MIB