All MIBs › CM-ENTITY-MIB
Organization: ADVA Optical Networking SE
Last Updated: 2021-01-27
Category: Optical and WDM
Description:
Provides vendor-specific extensions to the standard ENTITY-MIB for ADVA FSP150CM/CC optical transport product lines, describing physical and logical entities.
Imported Objects
From ADVA-MIB
| fsp150cm | OBJECT-IDENTITY |
From CM-COMMON-MIB
| AdminState | |
| CmPmIntervalType | |
| OperationalState | |
| RestartType | |
| SecondaryState | |
| TDMFrequencySourceType | |
| UsbOperationalMode | |
| VlanId |
From CM-SYSTEM-MIB
| CmAutoProvMode |
From ENTITY-MIB
| PhysicalIndex |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-TYPE |
From SNMPv2-TC
| DateAndTime | |
| DisplayString | |
| RowStatus | |
| StorageType | |
| TEXTUAL-CONVENTION | |
| TruthValue | |
| VariablePointer |
What Is CM-ENTITY-MIB?
CM-ENTITY-MIB is ADVA's vendor-specific extension to the standard ENTITY-MIB (RFC 2737), tailored for the F3 (FSP150CM/CC) product line of optical transport/carrier Ethernet devices. It exposes a network-element inventory table describing each managed element's name, type, contact, physical location, and free-text description, along with objects tracking whether a discovered element has been accepted into management and what provisioning action applies to it. This makes it primarily an inventory/asset and provisioning-status MIB: it helps confirm which optical transport network elements are known to the management system, where they are located, and whether they've been formally accepted, which is a form of software/management-state monitoring for the device fleet. As an explicit extension of the standard ENTITY-MIB, it depends on and complements that IETF standard's physical-entity model. It is used in service-provider optical/carrier Ethernet transport networks built on ADVA FSP150CM/CC hardware, and an operator loading this module in a CM-ENTITY-MIB MIB Browser session sees the networkElementTable alongside the acceptance and provisioning objects, giving immediate visibility into which nodes are under management.
IPNetwork Monitor allows you to monitor SNMP objects defined in CM-ENTITY-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
What Can Be Monitored
- network element name and type
- network element location and contact info
- element management-acceptance status
- element provisioning action state
Supported Devices
- ADVA FSP150CM optical transport switch
- ADVA FSP150CC optical transport switch
Monitoring Examples
An operator queries networkElementTable to list managed network elements by neName and neType, and uses neLocation/neContact for asset tracking across a metro optical network. The neAccepted and neProvAction objects indicate whether a newly discovered FSP150 element has been approved into management or is still pending action, which an operator checks when auditing which optical transport nodes are fully under management control after a network expansion.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| cmEntityMIB | 1.3.6.1.4.1.2544.1.12.3 | This module defines the Entity MIB definitions used by the F3 (FSP150CM/CC) product lines. These definitions are vendor specific extensions to the standard ENTITY MIB (RFC2737). Copyright (C) ADVA. | ||
| cmEntityObjects | 1.3.6.1.4.1.2544.1.12.3.1 | |||
| networkElementTable | 1.3.6.1.4.1.2544.1.12.3.1.1 | not-accessible | Entries may be auto discovered, or can be explicitly created by SNMP Manager. Each remotely discovered shelf is represented as a row in this table. | |
| networkElementEntry | 1.3.6.1.4.1.2544.1.12.3.1.1.1 | not-accessible | A conceptual row in the networkElementTable. | |
| I32 neIndex | 1.3.6.1.4.1.2544.1.12.3.1.1.1.1 | Integer32 | read-only | An arbitrary integer index value used to uniquely identify a NetworkElement. |
| STR neName | 1.3.6.1.4.1.2544.1.12.3.1.1.1.2 | DisplayString | read-create | An administratively-assigned name for the Network Element. By convention, this is the node's fully-qualified domain name. |
| NET neType | 1.3.6.1.4.1.2544.1.12.3.1.1.1.3 | NetworkElementType | read-create | Type of Network Element. |
| STR neContact | 1.3.6.1.4.1.2544.1.12.3.1.1.1.4 | DisplayString | read-create | The textual identification of the contact person for the Network Element, together with information on how to contact this person. |
| STR neLocation | 1.3.6.1.4.1.2544.1.12.3.1.1.1.5 | DisplayString | read-create | The physical location of this node (e.g., `telephone closet, 3rd floor'). |
| STR neDescription | 1.3.6.1.4.1.2544.1.12.3.1.1.1.6 | DisplayString | read-only | A textual description of the Network Element. This value should include the full name and version identification of the system's hardware type, software operating-system, and networking software. It is mandatory that this only contain printable ASCII characters. |
| STR neCmdPromptPrefix | 1.3.6.1.4.1.2544.1.12.3.1.1.1.7 | DisplayString | read-create | User specified command prompt prefix, used by the CLI, at the Network Element level. |
| T/F neAccepted | 1.3.6.1.4.1.2544.1.12.3.1.1.1.8 | TruthValue | read-only | Indicates whether or not the Network Element is accepted or not. When the system's autoProvMode(CM-SYSTEM-MIB) is 'confirm', NetworkElement's are discovered with this object as 'false'. User must invoke the 'accept' action on neProvAction object to accept the NetworkElement. |
| NUM neFromPort | 1.3.6.1.4.1.2544.1.12.3.1.1.1.9 | VariablePointer | read-create | The Network Element port to which this Network Element is connected. |
| NEP neProvAction | 1.3.6.1.4.1.2544.1.12.3.1.1.1.10 | NeProvAction | read-write | When the system's autoProvMode(CM-SYSTEM-MIB) is 'confirm', NetworkElement's are discovered with 'neAccepted' object as 'false'. User must invoke the 'accept' action on this object to accept the NetworkElement. User can invoke the 'decline' action on this object to decline the NetworkElement. |
| STO neStorageType | 1.3.6.1.4.1.2544.1.12.3.1.1.1.11 | StorageType | read-create | The type of storage configured for this entry. |
| ROW neRowStatus | 1.3.6.1.4.1.2544.1.12.3.1.1.1.12 | RowStatus | read-create | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of neRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with neRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The neRowStatus object may be modified if the associated instance of this object is equal to active(1). |
| CMA neAutoProvMode | 1.3.6.1.4.1.2544.1.12.3.1.1.1.13 | CmAutoProvMode | read-create | Autoprovisioning mode which controls automatic creation of cards plugged into the slots of Network Element. Supported values are off(1) and auto(3). When neAutoProvMode is auto then the cards inserted into the slots of Network Element will be automatically provisioned. When neAutoProvMode is off no auto-provisioning will occur. |
| NUM neFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.1.1.14 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the Network Element level. Value of this objec is propagated to all the cards beloning to the Network Element. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| shelfTable | 1.3.6.1.4.1.2544.1.12.3.1.2 | not-accessible | Contains information on shelf within the NetworkElement. In the case of FSP150CM, there is a single shelf for each NetworkElement. | |
| shelfEntry | 1.3.6.1.4.1.2544.1.12.3.1.2.1 | not-accessible | A conceptual row in the shelfTable. | |
| I32 shelfIndex | 1.3.6.1.4.1.2544.1.12.3.1.2.1.1 | Integer32 | read-only | An integer index value used to uniquely identify a Shelf within a NetworkElement. |
| PHY shelfEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.2.1.2 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for this shelf. |
| SHE shelfType | 1.3.6.1.4.1.2544.1.12.3.1.2.1.3 | ShelfType | read-write | Shelf Type of the shelf. |
| STR shelfbackplaneRev | 1.3.6.1.4.1.2544.1.12.3.1.2.1.4 | DisplayString | read-only | The backplane revision number. |
| DAT shelfbackplaneDOM | 1.3.6.1.4.1.2544.1.12.3.1.2.1.5 | DateAndTime | read-only | Backplane Date of Manufacture. |
| STR shelfbackplaneSerialNo | 1.3.6.1.4.1.2544.1.12.3.1.2.1.6 | DisplayString | read-only | Backplane Serial Number. |
| SHE shelfAction | 1.3.6.1.4.1.2544.1.12.3.1.2.1.7 | ShelfAction | read-write | Invoke action on the shelf, such as lamp test. |
| ADM shelfAdminState | 1.3.6.1.4.1.2544.1.12.3.1.2.1.8 | AdminState | read-write | Administrative State of the Shelf. |
| OPE shelfOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.2.1.9 | OperationalState | read-only | Operational State of the Shelf. |
| SEC shelfSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.2.1.10 | SecondaryState | read-only | Secondary State of the Shelf. |
| STR shelfMfgSite | 1.3.6.1.4.1.2544.1.12.3.1.2.1.11 | DisplayString | read-only | This is the shelf's Manufacturer site. |
| STR shelfOscillatorType | 1.3.6.1.4.1.2544.1.12.3.1.2.1.12 | DisplayString | read-only | The mOscillatorType. |
| LED shelfLedControl | 1.3.6.1.4.1.2544.1.12.3.1.2.1.13 | LedControlType | read-write | Led Control of the shelf. |
| slotTable | 1.3.6.1.4.1.2544.1.12.3.1.3 | not-accessible | Contains information on slot within the Shelf. | |
| slotEntry | 1.3.6.1.4.1.2544.1.12.3.1.3.1 | not-accessible | A conceptual row in the slotTable. | |
| I32 slotIndex | 1.3.6.1.4.1.2544.1.12.3.1.3.1.1 | Integer32 | read-only | The actual physical slot index that uniquely identify a Slot within a shelf. Slot number 255 is used to indicate system level entities. |
| PHY slotEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.3.1.2 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for this slot. |
| SLO slotType | 1.3.6.1.4.1.2544.1.12.3.1.3.1.3 | SlotType | read-only | Slot Type of the slot. 'generic' slots can hold NEMI card as well as line cards. |
| CAR slotCardType | 1.3.6.1.4.1.2544.1.12.3.1.3.1.4 | CardType | read-only | Card Type of the slot. |
| STR slotCardUnitName | 1.3.6.1.4.1.2544.1.12.3.1.3.1.5 | DisplayString | read-only | This is the inserted card's unit name. |
| STR slotCardFormatVersion | 1.3.6.1.4.1.2544.1.12.3.1.3.1.6 | DisplayString | read-only | This is the inserted card's format version. |
| STR slotCardCLEICode | 1.3.6.1.4.1.2544.1.12.3.1.3.1.7 | DisplayString | read-only | This is the inserted card's CLEI code. |
| STR slotCardPartNumber | 1.3.6.1.4.1.2544.1.12.3.1.3.1.8 | DisplayString | read-only | This is the inserted card's Part Number. |
| STR slotCardHwRev | 1.3.6.1.4.1.2544.1.12.3.1.3.1.9 | DisplayString | read-only | This is the inserted card's Hardware Revision. |
| STR slotCardSwRev | 1.3.6.1.4.1.2544.1.12.3.1.3.1.10 | DisplayString | read-only | This is the inserted card's Software Revision. |
| STR slotCardSerialNum | 1.3.6.1.4.1.2544.1.12.3.1.3.1.11 | DisplayString | read-only | This is the inserted card's Serial Number. |
| STR slotCardMfgName | 1.3.6.1.4.1.2544.1.12.3.1.3.1.12 | DisplayString | read-only | This is the inserted card's Manufacturer Name. |
| DAT slotCardMfgDate | 1.3.6.1.4.1.2544.1.12.3.1.3.1.13 | DateAndTime | read-only | This is the inserted card's Manufacturer date. |
| STR slotCardMfgSite | 1.3.6.1.4.1.2544.1.12.3.1.3.1.14 | DisplayString | read-only | This is the inserted card's Manufacturer site. |
| SEC slotSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.3.1.15 | SecondaryState | read-only | Secondary State of the Slot. |
| STR slotCardPhysicalAddress | 1.3.6.1.4.1.2544.1.12.3.1.3.1.16 | DisplayString | read-only | This is the inserted card's MAC Address, if applicable. |
| psuTable | 1.3.6.1.4.1.2544.1.12.3.1.4 | not-accessible | Contains information on Power Supply Units within the Shelf. | |
| psuEntry | 1.3.6.1.4.1.2544.1.12.3.1.4.1 | not-accessible | A conceptual row in the psuTable. | |
| PHY psuEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.4.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for this PSU. |
| PSU psuType | 1.3.6.1.4.1.2544.1.12.3.1.4.1.2 | PsuType | read-only | PSU Type of the PSU. |
| ADM psuAdminState | 1.3.6.1.4.1.2544.1.12.3.1.4.1.3 | AdminState | read-write | Administrative State of the PSU. |
| OPE psuOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.4.1.4 | OperationalState | read-only | Operational State of the PSU. |
| SEC psuSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.4.1.5 | SecondaryState | read-only | Secondary State of the PSU. |
| I32 psuOutputVoltage | 1.3.6.1.4.1.2544.1.12.3.1.4.1.6 | Integer32 | read-only | Output Voltage of the PSU. |
| I32 psuTemperature | 1.3.6.1.4.1.2544.1.12.3.1.4.1.7 | Integer32 | read-only | Temperature of the PSU. |
| I32 psuOutputCurrent | 1.3.6.1.4.1.2544.1.12.3.1.4.1.8 | Integer32 | read-only | Output Current of the PSU. |
| STO psuStorageType | 1.3.6.1.4.1.2544.1.12.3.1.4.1.9 | StorageType | read-create | The type of storage configured for this entry. |
| ROW psuRowStatus | 1.3.6.1.4.1.2544.1.12.3.1.4.1.10 | RowStatus | read-create | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of psuRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with psuRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The psuRowStatus object may be modified if the associated instance of this object is equal to active(1). |
| fanTable | 1.3.6.1.4.1.2544.1.12.3.1.5 | not-accessible | Contains information on FANs within the Shelf. | |
| fanEntry | 1.3.6.1.4.1.2544.1.12.3.1.5.1 | not-accessible | A conceptual row in the fanTable. | |
| PHY fanEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.5.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for this FAN. |
| ADM fanAdminState | 1.3.6.1.4.1.2544.1.12.3.1.5.1.2 | AdminState | read-write | Administrative State of the FAN. |
| OPE fanOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.5.1.3 | OperationalState | read-only | Operational State of the FAN. |
| SEC fanSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.5.1.4 | SecondaryState | read-only | Secondary State of the FAN. |
| STO fanStorageType | 1.3.6.1.4.1.2544.1.12.3.1.5.1.5 | StorageType | read-create | Storage Type of the FAN. |
| ROW fanRowStatus | 1.3.6.1.4.1.2544.1.12.3.1.5.1.6 | RowStatus | read-create | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of fanRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with fanRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The fanRowStatus object may be modified if the associated instance of this object is equal to active(1). |
| scuTable | 1.3.6.1.4.1.2544.1.12.3.1.6 | not-accessible | Contains information on SCU within the Shelf. | |
| scuEntry | 1.3.6.1.4.1.2544.1.12.3.1.6.1 | not-accessible | A conceptual row in the scuTable. | |
| PHY scuEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.6.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the SCU card. |
| ADM scuAdminState | 1.3.6.1.4.1.2544.1.12.3.1.6.1.2 | AdminState | read-write | Administrative State of the SCU. |
| OPE scuOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.6.1.3 | OperationalState | read-only | Operational State of the SCU. |
| SEC scuSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.6.1.4 | SecondaryState | read-only | Secondary State of the SCU. |
| I32 scuVoltage | 1.3.6.1.4.1.2544.1.12.3.1.6.1.5 | Integer32 | read-only | Voltage of the SCU. |
| I32 scuTemperature | 1.3.6.1.4.1.2544.1.12.3.1.6.1.6 | Integer32 | read-only | Temperature of the SCU. |
| RES scuRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.6.1.7 | RestartType | read-write | Allows to perform specified action on the SCU card. |
| STO scuStorageType | 1.3.6.1.4.1.2544.1.12.3.1.6.1.8 | StorageType | read-create | The type of storage configured for this entry. |
| ROW scuRowStatus | 1.3.6.1.4.1.2544.1.12.3.1.6.1.9 | RowStatus | read-create | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of scuRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with scuRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The scuRowStatus object may be modified if the associated instance of this object is equal to active(1). |
| STR scuFlashModelNum | 1.3.6.1.4.1.2544.1.12.3.1.6.1.10 | DisplayString | read-only | This provides the Compact Flash Model Number on the SCU card. |
| STR scuFlashFirmwareRev | 1.3.6.1.4.1.2544.1.12.3.1.6.1.11 | DisplayString | read-only | This provides the Compact Flash Firmware Revision on the SCU card. |
| STR scuFlashSerialNum | 1.3.6.1.4.1.2544.1.12.3.1.6.1.12 | DisplayString | read-only | This provides the Compact Flash Serial Number on the SCU card. |
| nemiTable | 1.3.6.1.4.1.2544.1.12.3.1.7 | not-accessible | Contains information on NEMI within the Shelf. | |
| nemiEntry | 1.3.6.1.4.1.2544.1.12.3.1.7.1 | not-accessible | A conceptual row in the nemiTable. | |
| PHY nemiEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.7.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the NEMI card. |
| ADM nemiAdminState | 1.3.6.1.4.1.2544.1.12.3.1.7.1.2 | AdminState | read-write | Administrative State of the NEMI. |
| OPE nemiOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.7.1.3 | OperationalState | read-only | Operational State of the NEMI. |
| SEC nemiSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.7.1.4 | SecondaryState | read-only | Secondary State of the NEMI. |
| I32 nemiVoltage | 1.3.6.1.4.1.2544.1.12.3.1.7.1.5 | Integer32 | read-only | Voltage of the NEMI. |
| I32 nemiTemperature | 1.3.6.1.4.1.2544.1.12.3.1.7.1.6 | Integer32 | read-only | Temperature of the NEMI. |
| RES nemiRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.7.1.7 | RestartType | read-write | Allows to perform specified action on the NEMI card. |
| STO nemiStorageType | 1.3.6.1.4.1.2544.1.12.3.1.7.1.8 | StorageType | read-create | The type of storage configured for this entry. |
| ROW nemiRowStatus | 1.3.6.1.4.1.2544.1.12.3.1.7.1.9 | RowStatus | read-create | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of nemiRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with nemiRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The nemiRowStatus object may be modified if the associated instance of this object is equal to active(1). |
| T/F nemiForceOffLineAction | 1.3.6.1.4.1.2544.1.12.3.1.7.1.10 | TruthValue | read-write | On some condition, user wishes to make one card out of service and hold the reset signal of the card via AMI. When force offline is enabled, reset signal is held; When force offline is disabled, reset signal is released. |
| STR nemiFlashModelNum | 1.3.6.1.4.1.2544.1.12.3.1.7.1.11 | DisplayString | read-only | This provides the Flash Model Number on the NEMI card. |
| STR nemiFlashFirmwareRev | 1.3.6.1.4.1.2544.1.12.3.1.7.1.12 | DisplayString | read-only | This provides the Flash Firmware Revision on the NEMI card. |
| STR nemiFlashSerialNum | 1.3.6.1.4.1.2544.1.12.3.1.7.1.13 | DisplayString | read-only | This provides the Flash Serial Number on the NEMI card. |
| ethernetNTUCardTable | 1.3.6.1.4.1.2544.1.12.3.1.8 | not-accessible | Contains information on Ethernet NTU Cards within the Shelf. These cards support 10M, 100M and 1G Ethernet Interfaces. | |
| ethernetNTUCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.8.1 | not-accessible | A conceptual row in the ethernetNTUCardTable. | |
| PHY ethernetNTUCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.8.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTU Card. |
| ADM ethernetNTUCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.8.1.2 | AdminState | read-write | Administrative State of the Ethernet NTU Card. |
| OPE ethernetNTUCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.8.1.3 | OperationalState | read-only | Operational State of the Ethernet NTU Card. |
| SEC ethernetNTUCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.8.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTU Card. |
| I32 ethernetNTUCardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.8.1.5 | Integer32 | read-only | Voltage of the Ethernet NTU Card. |
| I32 ethernetNTUCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.8.1.6 | Integer32 | read-only | Temperature of the Ethernet NTU Card. |
| T/F ethernetNTUCardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.8.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTU Card. |
| RES ethernetNTUCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.8.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTU card. |
| STO ethernetNTUCardStorageType | 1.3.6.1.4.1.2544.1.12.3.1.8.1.9 | StorageType | read-create | The type of storage configured for this entry. |
| ROW ethernetNTUCardRowStatus | 1.3.6.1.4.1.2544.1.12.3.1.8.1.10 | RowStatus | read-create | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ethernetNTUCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ethernetNTUCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ethernetNTUCardRowStatus object may be modified if the associated instance of this object is equal to active(1). |
| ethernetCPMRCardTable | 1.3.6.1.4.1.2544.1.12.3.1.9 | not-accessible | Contains information on Ethernet CPMR Cards within the Shelf. | |
| ethernetCPMRCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.9.1 | not-accessible | A conceptual row in the ethernetCPMRCardTable. | |
| PHY ethernetCPMRCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.9.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet CPMR Card. |
| ADM ethernetCPMRCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.9.1.2 | AdminState | read-write | Administrative State of the Ethernet CPMR Card. |
| OPE ethernetCPMRCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.9.1.3 | OperationalState | read-only | Operational State of the Ethernet CPMR Card. |
| SEC ethernetCPMRCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.9.1.4 | SecondaryState | read-only | Secondary State of the Ethernet CPMR Card. |
| I32 ethernetCPMRCardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.9.1.5 | Integer32 | read-only | Voltage of the Ethernet CPMR Card. |
| I32 ethernetCPMRCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.9.1.6 | Integer32 | read-only | Temperature of the Ethernet CPMR Card. |
| RES ethernetCPMRCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.9.1.7 | RestartType | read-write | Allows to perform specified action on the Ethernet CPMR card. |
| OPE ethernetCPMRCardPSU1State | 1.3.6.1.4.1.2544.1.12.3.1.9.1.8 | OperationalState | read-only | Operational State of Power Supply Unit 1 on Ethernet CPMR chassis. |
| OPE ethernetCPMRCardPSU2State | 1.3.6.1.4.1.2544.1.12.3.1.9.1.9 | OperationalState | read-only | Operational State of Power Supply Unit 2 on Ethernet CPMR chassis. |
| OPE ethernetCPMRCardFAN1State | 1.3.6.1.4.1.2544.1.12.3.1.9.1.10 | OperationalState | read-only | Operational State of FAN 1 on Ethernet CPMR chassis. |
| OPE ethernetCPMRCardFAN2State | 1.3.6.1.4.1.2544.1.12.3.1.9.1.11 | OperationalState | read-only | Operational State of FAN 2 on Ethernet CPMR chassis. |
| PSU ethernetCPMRCardPsuType | 1.3.6.1.4.1.2544.1.12.3.1.9.1.12 | PsuType | read-only | PSU Type on Ethernet CPMR chassis. |
| CMC ethernetCPMRCardLLFMode | 1.3.6.1.4.1.2544.1.12.3.1.9.1.13 | CmCPMRLinkLossFwdMode | read-only | Current Link Loss Forwarding Mode on CPMR. |
| CMC ethernetCPMRCardLLFModeAction | 1.3.6.1.4.1.2544.1.12.3.1.9.1.14 | CmCPMRLinkLossFwdMode | read-write | Operation to set the appropriate mode on CPMR. |
| ethernetNTEGE101CardTable | 1.3.6.1.4.1.2544.1.12.3.1.10 | not-accessible | Contains information on Ethernet NTE GE101 Cards. These are supported on the FSP150CC GE101 product. | |
| ethernetNTEGE101CardEntry | 1.3.6.1.4.1.2544.1.12.3.1.10.1 | not-accessible | A conceptual row in the ethernetNTEGE101CardTable. | |
| PHY ethernetNTEGE101CardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.10.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE GE101 Card. |
| ADM ethernetNTEGE101CardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.10.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE GE101 Card. |
| OPE ethernetNTEGE101CardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.10.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE GE101 Card. |
| SEC ethernetNTEGE101CardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.10.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE GE101 Card. |
| I32 ethernetNTEGE101CardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.10.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE GE101 Card. |
| I32 ethernetNTEGE101CardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.10.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE GE101 Card. |
| T/F ethernetNTEGE101CardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.10.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE101 Card. |
| RES ethernetNTEGE101CardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.10.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE GE101 card. |
| ethernetNTEGE206CardTable | 1.3.6.1.4.1.2544.1.12.3.1.11 | not-accessible | Contains information on Ethernet NTE GE206 Cards. These are supported on the FSP150CC GE206 product. | |
| ethernetNTEGE206CardEntry | 1.3.6.1.4.1.2544.1.12.3.1.11.1 | not-accessible | A conceptual row in the ethernetNTEGE206CardTable. | |
| PHY ethernetNTEGE206CardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.11.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE GE206 Card. |
| ADM ethernetNTEGE206CardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.11.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE GE206 Card. |
| OPE ethernetNTEGE206CardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.11.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE GE206 Card. |
| SEC ethernetNTEGE206CardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.11.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE GE206 Card. |
| I32 ethernetNTEGE206CardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.11.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE GE206 Card. |
| I32 ethernetNTEGE206CardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.11.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE GE206 Card. |
| T/F ethernetNTEGE206CardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.11.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE206 Card. |
| RES ethernetNTEGE206CardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.11.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE GE206 card. |
| NUM ethernetNTEGE206CardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.11.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| pseudoWireE3CardTable | 1.3.6.1.4.1.2544.1.12.3.1.12 | not-accessible | Contains information on Pseudo Wire E3 (Emulation Edge to Edge) Cards. These are supported on the FSP150CC GE206 product. | |
| pseudoWireE3CardEntry | 1.3.6.1.4.1.2544.1.12.3.1.12.1 | not-accessible | A conceptual row in the pseudoWireE3CardTable. | |
| PHY pseudoWireE3CardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.12.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Pseudo Wire E3 Card. |
| ADM pseudoWireE3CardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.12.1.2 | AdminState | read-write | Administrative State of the Pseudo Wire E3 Card. |
| OPE pseudoWireE3CardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.12.1.3 | OperationalState | read-only | Operational State of the Pseudo Wire E3 Card. |
| SEC pseudoWireE3CardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.12.1.4 | SecondaryState | read-only | Secondary State of the Pseudo Wire E3 Card. |
| IP pseudoWireE3CardIpAddress | 1.3.6.1.4.1.2544.1.12.3.1.12.1.5 | IpAddress | read-write | External management IP Address of the Pseudo Wire E3 Card. |
| IP pseudoWireE3CardIpNetmask | 1.3.6.1.4.1.2544.1.12.3.1.12.1.6 | IpAddress | read-write | External management IP Net mask of the Pseudo Wire E3 Card. |
| IP pseudoWireE3CardIpGateway | 1.3.6.1.4.1.2544.1.12.3.1.12.1.7 | IpAddress | read-write | External management IP Gateway of the Pseudo Wire E3 Card. |
| T/F pseudoWireE3CardDhcpEnabled | 1.3.6.1.4.1.2544.1.12.3.1.12.1.8 | TruthValue | read-write | External management - whether DHCP is enabled. |
| VLA pseudoWireE3CardMgmtVlanId | 1.3.6.1.4.1.2544.1.12.3.1.12.1.9 | VlanId | read-write | External management VLAN Id for the Pseudo Wire E3 Card. |
| DAT pseudoWireE3CardTimeOfDay | 1.3.6.1.4.1.2544.1.12.3.1.12.1.10 | DateAndTime | read-write | Time of day for the Pseudo Wire E3 Card. |
| RES pseudoWireE3CardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.12.1.11 | RestartType | read-write | Allows to perform restart action on the Pseudo Wire E3 card. |
| scuTTable | 1.3.6.1.4.1.2544.1.12.3.1.13 | not-accessible | Contains information on SCU-T within the Shelf. | |
| scuTEntry | 1.3.6.1.4.1.2544.1.12.3.1.13.1 | not-accessible | A conceptual row in the scuTTable. | |
| PHY scuTEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.13.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the SCU-T card. |
| ADM scuTAdminState | 1.3.6.1.4.1.2544.1.12.3.1.13.1.2 | AdminState | read-write | Administrative State of the SCU-T. |
| OPE scuTOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.13.1.3 | OperationalState | read-only | Operational State of the SCU-T. |
| SEC scuTSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.13.1.4 | SecondaryState | read-only | Secondary State of the SCU-T. |
| I32 scuTVoltage | 1.3.6.1.4.1.2544.1.12.3.1.13.1.5 | Integer32 | read-only | Voltage of the SCU-T. |
| I32 scuTTemperature | 1.3.6.1.4.1.2544.1.12.3.1.13.1.6 | Integer32 | read-only | Temperature of the SCU-T. |
| RES scuTRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.13.1.7 | RestartType | read-write | Allows to perform specified action on the SCU-T card. |
| STO scuTStorageType | 1.3.6.1.4.1.2544.1.12.3.1.13.1.8 | StorageType | read-create | The type of storage configured for this entry. |
| ROW scuTRowStatus | 1.3.6.1.4.1.2544.1.12.3.1.13.1.9 | RowStatus | read-create | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of scuTRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with neRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The scuTRowStatus object may be modified if the associated instance of this object is equal to active(1). |
| ethernetNTECardTable | 1.3.6.1.4.1.2544.1.12.3.1.14 | not-accessible | Contains information on Ethernet NTE Cards within the Shelf. These cards support 10M, 100M and 1G Ethernet Interfaces. | |
| ethernetNTECardEntry | 1.3.6.1.4.1.2544.1.12.3.1.14.1 | not-accessible | A conceptual row in the ethernetNTECardTable. | |
| PHY ethernetNTECardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.14.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE Card. |
| ADM ethernetNTECardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.14.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE Card. |
| OPE ethernetNTECardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.14.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE Card. |
| SEC ethernetNTECardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.14.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE Card. |
| I32 ethernetNTECardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.14.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE Card. |
| I32 ethernetNTECardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.14.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE Card. |
| T/F ethernetNTECardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.14.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE Card. |
| RES ethernetNTECardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.14.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE card. |
| STO ethernetNTECardStorageType | 1.3.6.1.4.1.2544.1.12.3.1.14.1.9 | StorageType | read-create | The type of storage configured for this entry. |
| ROW ethernetNTECardRowStatus | 1.3.6.1.4.1.2544.1.12.3.1.14.1.10 | RowStatus | read-create | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ethernetNTECardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ethernetNTECardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ethernetNTECardRowStatus object may be modified if the associated instance of this object is equal to active(1). |
| ethernetNTEGE201CardTable | 1.3.6.1.4.1.2544.1.12.3.1.15 | not-accessible | Contains information on Ethernet NTE GE201 Cards. These are supported on the FSP150CC GE201 product. | |
| ethernetNTEGE201CardEntry | 1.3.6.1.4.1.2544.1.12.3.1.15.1 | not-accessible | A conceptual row in the ethernetNTEGE201CardTable. | |
| PHY ethernetNTEGE201CardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.15.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE GE201 Card. |
| ADM ethernetNTEGE201CardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.15.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE GE201 Card. |
| OPE ethernetNTEGE201CardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.15.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE GE201 Card. |
| SEC ethernetNTEGE201CardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.15.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE GE201 Card. |
| I32 ethernetNTEGE201CardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.15.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE GE201 Card. |
| I32 ethernetNTEGE201CardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.15.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE GE201 Card. |
| T/F ethernetNTEGE201CardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.15.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE201 Card. |
| RES ethernetNTEGE201CardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.15.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE GE201 card. |
| NUM ethernetNTEGE201CardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.15.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| ethernetNTEGE201SyncECardTable | 1.3.6.1.4.1.2544.1.12.3.1.16 | not-accessible | Contains information on Ethernet NTE GE201SyncE Cards. These are supported on the FSP150CC GE201SyncE product. | |
| ethernetNTEGE201SyncECardEntry | 1.3.6.1.4.1.2544.1.12.3.1.16.1 | not-accessible | A conceptual row in the ethernetNTEGE201SyncECardTable. | |
| PHY ethernetNTEGE201SyncECardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.16.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE GE201SyncE Card. |
| ADM ethernetNTEGE201SyncECardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.16.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE GE201SyncE Card. |
| OPE ethernetNTEGE201SyncECardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.16.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE GE201SyncE Card. |
| SEC ethernetNTEGE201SyncECardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.16.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE GE201SyncE Card. |
| I32 ethernetNTEGE201SyncECardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.16.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE GE201SyncE Card. |
| I32 ethernetNTEGE201SyncECardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.16.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE GE201SyncE Card. |
| T/F ethernetNTEGE201SyncECardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.16.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE201SyncE Card. |
| RES ethernetNTEGE201SyncECardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.16.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE GE201SyncE card. |
| NUM ethernetNTEGE201SyncECardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.16.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| ethernetNTEGE206FCardTable | 1.3.6.1.4.1.2544.1.12.3.1.17 | not-accessible | Contains information on Ethernet NTE GE206F Cards. These are supported on the FSP150CC GE206 product. | |
| ethernetNTEGE206FCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.17.1 | not-accessible | A conceptual row in the ethernetNTEGE206FCardTable. | |
| PHY ethernetNTEGE206FCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.17.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE GE206 Card. |
| ADM ethernetNTEGE206FCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.17.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE GE206 Card. |
| OPE ethernetNTEGE206FCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.17.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE GE206 Card. |
| SEC ethernetNTEGE206FCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.17.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE GE206 Card. |
| I32 ethernetNTEGE206FCardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.17.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE GE206 Card. |
| I32 ethernetNTEGE206FCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.17.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE GE206 Card. |
| T/F ethernetNTEGE206FCardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.17.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE206 Card. |
| RES ethernetNTEGE206FCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.17.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE GE206 card. |
| NUM ethernetNTEGE206FCardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.17.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| ethernet1x10GCardTable | 1.3.6.1.4.1.2544.1.12.3.1.18 | not-accessible | Contains information on Ethernet 1x10G Cards. | |
| ethernet1x10GCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.18.1 | not-accessible | A conceptual row in the ethernet1x10GCardTable. | |
| PHY ethernet1x10GCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.18.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet 1x10G Card. |
| ADM ethernet1x10GCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.18.1.2 | AdminState | read-write | Administrative State of the Ethernet 1x10G Card. |
| OPE ethernet1x10GCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.18.1.3 | OperationalState | read-only | Operational State of the Ethernet 1x10G Card. |
| SEC ethernet1x10GCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.18.1.4 | SecondaryState | read-only | Secondary State of the Ethernet 1x10G Card. |
| I32 ethernet1x10GCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.18.1.5 | Integer32 | read-only | Temperature of the Ethernet 1x10G Card. |
| T/F ethernet1x10GCardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.18.1.6 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet 1x10G Card. |
| RES ethernet1x10GCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.18.1.7 | RestartType | read-write | Allows to perform specified action on the Ethernet 1x10G card. |
| STO ethernet1x10GCardStorageType | 1.3.6.1.4.1.2544.1.12.3.1.18.1.8 | StorageType | read-create | The type of storage configured for this entry. |
| ROW ethernet1x10GCardRowStatus | 1.3.6.1.4.1.2544.1.12.3.1.18.1.9 | RowStatus | read-create | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ethernet1x10GCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ethernetNTUCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ethernet1x10GCardRowStatus object may be modified if the associated instance of this object is equal to active(1). |
| T/F ethernet1x10GCardForceOffLineAction | 1.3.6.1.4.1.2544.1.12.3.1.18.1.10 | TruthValue | read-write | On some condition, user wishes to make one card out of service and hold the reset signal of the card via AMI. When force offline is enabled, reset signal is held; When force offline is disabled, reset signal is released. |
| ethernet10x1GCardTable | 1.3.6.1.4.1.2544.1.12.3.1.19 | not-accessible | Contains information on Ethernet 10x1G Cards. | |
| ethernet10x1GCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.19.1 | not-accessible | A conceptual row in the ethernet10x1GCardTable. | |
| PHY ethernet10x1GCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.19.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet 10x1G Card. |
| ADM ethernet10x1GCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.19.1.2 | AdminState | read-write | Administrative State of the Ethernet 10x1G Card. |
| OPE ethernet10x1GCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.19.1.3 | OperationalState | read-only | Operational State of the Ethernet 10x1G Card. |
| SEC ethernet10x1GCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.19.1.4 | SecondaryState | read-only | Secondary State of the Ethernet 10x1G Card. |
| I32 ethernet10x1GCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.19.1.5 | Integer32 | read-only | Temperature of the Ethernet 10x1G Card. |
| T/F ethernet10x1GCardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.19.1.6 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet 10x1G Card. |
| RES ethernet10x1GCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.19.1.7 | RestartType | read-write | Allows to perform specified action on the Ethernet 10x1G card. |
| STO ethernet10x1GCardStorageType | 1.3.6.1.4.1.2544.1.12.3.1.19.1.8 | StorageType | read-create | The type of storage configured for this entry. |
| ROW ethernet10x1GCardRowStatus | 1.3.6.1.4.1.2544.1.12.3.1.19.1.9 | RowStatus | read-create | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ethernet10x1GCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ethernet10x1GCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ethernet10x1GCardRowStatus object may be modified if the associated instance of this object is equal to active(1). |
| T/F ethernet10x1GCardForceOffLineAction | 1.3.6.1.4.1.2544.1.12.3.1.19.1.10 | TruthValue | read-write | On some condition, user wishes to make one card out of service and hold the reset signal of the card via AMI. When force offline is enabled, reset signal is held; When force offline is disabled, reset signal is released. |
| ethernetSWFCardTable | 1.3.6.1.4.1.2544.1.12.3.1.20 | not-accessible | Contains information on Ethernet SWF Cards. | |
| ethernetSWFCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.20.1 | not-accessible | A conceptual row in the ethernetSWFCardTable. | |
| PHY ethernetSWFCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.20.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet SWF Card. |
| ADM ethernetSWFCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.20.1.2 | AdminState | read-write | Administrative State of the Ethernet SWF Card. |
| OPE ethernetSWFCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.20.1.3 | OperationalState | read-only | Operational State of the Ethernet SWF Card. |
| SEC ethernetSWFCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.20.1.4 | SecondaryState | read-only | Secondary State of the Ethernet SWF Card. |
| I32 ethernetSWFCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.20.1.5 | Integer32 | read-only | Temperature of the Ethernet SWF Card. |
| RES ethernetSWFCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.20.1.6 | RestartType | read-write | Allows to perform specified action on the Ethernet SWF card. |
| STO ethernetSWFCardStorageType | 1.3.6.1.4.1.2544.1.12.3.1.20.1.7 | StorageType | read-create | The type of storage configured for this entry. |
| ROW ethernetSWFCardRowStatus | 1.3.6.1.4.1.2544.1.12.3.1.20.1.8 | RowStatus | read-create | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ethernetSWFCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ethernetNTUCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ethernetSWFCardRowStatus object may be modified if the associated instance of this object is equal to active(1). |
| T/F ethernetSWFCardForceOffLineAction | 1.3.6.1.4.1.2544.1.12.3.1.20.1.9 | TruthValue | read-write | On some condition, user wishes to make one card out of service and hold the reset signal of the card via AMI. When force offline is enabled, reset signal is held; When force offline is disabled, reset signal is released. |
| stuCardTable | 1.3.6.1.4.1.2544.1.12.3.1.21 | not-accessible | Contains information on STU Cards. | |
| stuCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.21.1 | not-accessible | A conceptual row in the stuCardTable. | |
| PHY stuCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.21.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the STU Card. |
| ADM stuCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.21.1.2 | AdminState | read-write | Administrative State of the Stu Card. |
| OPE stuCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.21.1.3 | OperationalState | read-only | Operational State of the Stu Card. |
| SEC stuCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.21.1.4 | SecondaryState | read-only | Secondary State of the Stu Card. |
| I32 stuCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.21.1.5 | Integer32 | read-only | Temperature of the Stu Card. |
| RES stuCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.21.1.6 | RestartType | read-write | Allows to perform specified action on the Stu card. |
| STO stuCardStorageType | 1.3.6.1.4.1.2544.1.12.3.1.21.1.7 | StorageType | read-create | The type of storage configured for this entry. |
| ROW stuCardRowStatus | 1.3.6.1.4.1.2544.1.12.3.1.21.1.8 | RowStatus | read-create | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of stuCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with stuRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The stuCardRowStatus object may be modified if the associated instance of this object is equal to active(1). |
| T/F stuCardForceOffLineAction | 1.3.6.1.4.1.2544.1.12.3.1.21.1.9 | TruthValue | read-write | On some condition, user wishes to make one card out of service and hold the reset signal of the card via AMI. When force offline is enabled, reset signal is held; When force offline is disabled, reset signal is released. |
| amiTable | 1.3.6.1.4.1.2544.1.12.3.1.22 | not-accessible | Contains information on AMI within the Shelf. | |
| amiEntry | 1.3.6.1.4.1.2544.1.12.3.1.22.1 | not-accessible | A conceptual row in the amiTable. | |
| PHY amiEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.22.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the AMI card. |
| ADM amiAdminState | 1.3.6.1.4.1.2544.1.12.3.1.22.1.2 | AdminState | read-write | Administrative State of the AMI. |
| OPE amiOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.22.1.3 | OperationalState | read-only | Operational State of the AMI. |
| SEC amiSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.22.1.4 | SecondaryState | read-only | Secondary State of the AMI. |
| I32 amiTemperature | 1.3.6.1.4.1.2544.1.12.3.1.22.1.5 | Integer32 | read-only | Temperature of the AMI. |
| RES amiRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.22.1.6 | RestartType | read-write | Allows to perform specified action on the AMI card. |
| stiTable | 1.3.6.1.4.1.2544.1.12.3.1.23 | not-accessible | Contains information on STI within the Shelf. | |
| stiEntry | 1.3.6.1.4.1.2544.1.12.3.1.23.1 | not-accessible | A conceptual row in the stiTable. | |
| PHY stiEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.23.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the STI card. |
| ADM stiAdminState | 1.3.6.1.4.1.2544.1.12.3.1.23.1.2 | AdminState | read-write | Administrative State of the STI. |
| OPE stiOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.23.1.3 | OperationalState | read-only | Operational State of the STI. |
| SEC stiSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.23.1.4 | SecondaryState | read-only | Secondary State of the STI. |
| I32 stiTemperature | 1.3.6.1.4.1.2544.1.12.3.1.23.1.5 | Integer32 | read-only | Temperature of the STI. |
| STO stiStorageType | 1.3.6.1.4.1.2544.1.12.3.1.23.1.6 | StorageType | read-create | The type of storage configured for this entry. |
| ROW stiRowStatus | 1.3.6.1.4.1.2544.1.12.3.1.23.1.7 | RowStatus | read-create | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of stiRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with stiRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The stiRowStatus object may be modified if the associated instance of this object is equal to active(1). |
| f3UsbHostTable | 1.3.6.1.4.1.2544.1.12.3.1.24 | not-accessible | Contains information on Usb Host. | |
| f3UsbHostEntry | 1.3.6.1.4.1.2544.1.12.3.1.24.1 | not-accessible | A conceptual row in the f3UsbHostTable. | |
| PHY f3UsbHostIndex | 1.3.6.1.4.1.2544.1.12.3.1.24.1.1 | PhysicalIndex | read-only | The actual physical usb host index that uniquely identify a usb host. |
| PHY f3UsbHostEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.24.1.2 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the usb host. |
| STR f3UsbHostUnitName | 1.3.6.1.4.1.2544.1.12.3.1.24.1.3 | DisplayString | read-only | This is the inserted usb device's unit name. |
| STR f3UsbHostFormatVersion | 1.3.6.1.4.1.2544.1.12.3.1.24.1.4 | DisplayString | read-only | This is the inserted usb device's format version. |
| STR f3UsbHostCLEICode | 1.3.6.1.4.1.2544.1.12.3.1.24.1.5 | DisplayString | read-only | This is the inserted usb device's CLEI code. |
| STR f3UsbHostPartNumber | 1.3.6.1.4.1.2544.1.12.3.1.24.1.6 | DisplayString | read-only | This is the inserted usb device's Part Number. |
| STR f3UsbHostHwRev | 1.3.6.1.4.1.2544.1.12.3.1.24.1.7 | DisplayString | read-only | This is the inserted usb device's Hardware Revision. |
| STR f3UsbHostSwRev | 1.3.6.1.4.1.2544.1.12.3.1.24.1.8 | DisplayString | read-only | This is the inserted usb device's Software Revision. |
| STR f3UsbHostSerialNum | 1.3.6.1.4.1.2544.1.12.3.1.24.1.9 | DisplayString | read-only | This is the inserted usb device's Serial Number. |
| STR f3UsbHostMfgName | 1.3.6.1.4.1.2544.1.12.3.1.24.1.10 | DisplayString | read-only | This is the inserted usb device's Manufacturer Name. |
| DAT f3UsbHostMfgDate | 1.3.6.1.4.1.2544.1.12.3.1.24.1.11 | DateAndTime | read-only | This is the inserted usb device's Manufacturer date. |
| STR f3UsbHostMfgSite | 1.3.6.1.4.1.2544.1.12.3.1.24.1.12 | DisplayString | read-only | This is the inserted usb device's Manufacturer site. |
| SEC f3UsbHostSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.24.1.13 | SecondaryState | read-only | Secondary State of the usb device. |
| STR f3UsbHostPhysicalAddress | 1.3.6.1.4.1.2544.1.12.3.1.24.1.14 | DisplayString | read-only | This is the inserted usb device's MAC Address, if applicable. |
| USB f3UsbHostMuxOperationalMode | 1.3.6.1.4.1.2544.1.12.3.1.24.1.15 | UsbOperationalMode | read-write | This object describe the USB operatioan mode. |
| ethernetNTEGE112CardTable | 1.3.6.1.4.1.2544.1.12.3.1.25 | not-accessible | Contains information on Ethernet NTE GE112 Cards. These are supported on the FSP150CC GE112 product. | |
| ethernetNTEGE112CardEntry | 1.3.6.1.4.1.2544.1.12.3.1.25.1 | not-accessible | A conceptual row in the ethernetNTEGE112CardTable. | |
| PHY ethernetNTEGE112CardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.25.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE GE112 Card. |
| ADM ethernetNTEGE112CardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.25.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE GE112 Card. |
| OPE ethernetNTEGE112CardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.25.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE GE112 Card. |
| SEC ethernetNTEGE112CardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.25.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE GE112 Card. |
| I32 ethernetNTEGE112CardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.25.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE GE112 Card. |
| I32 ethernetNTEGE112CardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.25.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE GE112 Card. |
| T/F ethernetNTEGE112CardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.25.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE112 Card. |
| RES ethernetNTEGE112CardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.25.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE GE112 card. |
| NUM ethernetNTEGE112CardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.25.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| NUM ethernetNTEGE112CardSwitchPortActionPort | 1.3.6.1.4.1.2544.1.12.3.1.25.1.10 | VariablePointer | read-create | Which port to perform specified switch action on the Ethernet NTE GE112 card. |
| SWI ethernetNTEGE112CardSwitchPortAction | 1.3.6.1.4.1.2544.1.12.3.1.25.1.11 | SwitchPortAction | read-write | Allows to perform specified action on the Ethernet NTE GE112 card. |
| ethernetNTEGE114CardTable | 1.3.6.1.4.1.2544.1.12.3.1.26 | not-accessible | Contains information on Ethernet NTE GE114 Cards. These are supported on the FSP150CC GE114 product. | |
| ethernetNTEGE114CardEntry | 1.3.6.1.4.1.2544.1.12.3.1.26.1 | not-accessible | A conceptual row in the ethernetNTEGE114CardTable. | |
| PHY ethernetNTEGE114CardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.26.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE GE114 Card. |
| ADM ethernetNTEGE114CardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.26.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE GE114 Card. |
| OPE ethernetNTEGE114CardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.26.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE GE114 Card. |
| SEC ethernetNTEGE114CardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.26.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE GE114 Card. |
| I32 ethernetNTEGE114CardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.26.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE GE112 Card. |
| I32 ethernetNTEGE114CardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.26.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE GE114 Card. |
| T/F ethernetNTEGE114CardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.26.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114 Card. |
| RES ethernetNTEGE114CardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.26.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE GE114 card. |
| NUM ethernetNTEGE114CardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.26.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| NUM ethernetNTEGE114CardSwitchPortActionPort | 1.3.6.1.4.1.2544.1.12.3.1.26.1.10 | VariablePointer | read-create | Which port to perform specified switch action on the Ethernet NTE GE114 card. |
| SWI ethernetNTEGE114CardSwitchPortAction | 1.3.6.1.4.1.2544.1.12.3.1.26.1.11 | SwitchPortAction | read-write | Allows to perform specified action on the Ethernet NTE GE114 card. |
| ethernetNTEGE206VCardTable | 1.3.6.1.4.1.2544.1.12.3.1.27 | not-accessible | Contains information on Ethernet NTE GE206V Cards. These are supported on the FSP150CC GE206V product. | |
| ethernetNTEGE206VCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.27.1 | not-accessible | A conceptual row in the ethernetNTEGE206VCardTable. | |
| PHY ethernetNTEGE206VCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.27.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE GE206V Card. |
| ADM ethernetNTEGE206VCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.27.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE GE206V Card. |
| OPE ethernetNTEGE206VCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.27.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE GE206V Card. |
| SEC ethernetNTEGE206VCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.27.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE GE206V Card. |
| I32 ethernetNTEGE206VCardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.27.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE GE206V Card. |
| I32 ethernetNTEGE206VCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.27.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE GE206V Card. |
| T/F ethernetNTEGE206VCardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.27.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE206V Card. |
| RES ethernetNTEGE206VCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.27.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE GE206V card. |
| NUM ethernetNTEGE206VCardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.27.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| ethernetGE4SCCCardTable | 1.3.6.1.4.1.2544.1.12.3.1.28 | not-accessible | Contains information on Ethernet GE206V Optical Port Expander Cards. These are supported on the FSP150CC GE206V product. | |
| ethernetGE4SCCCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.28.1 | not-accessible | A conceptual row in the ethernetGE4SCCCardTable. | |
| PHY ethernetGE4SCCCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.28.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet GE-4S Connector Card. |
| ADM ethernetGE4SCCCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.28.1.2 | AdminState | read-write | Administrative State of the Ethernet GE-4S Connector Card. |
| OPE ethernetGE4SCCCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.28.1.3 | OperationalState | read-only | Operational State of the Ethernet GE-4S Connector Card. |
| SEC ethernetGE4SCCCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.28.1.4 | SecondaryState | read-only | Secondary State of the Ethernet GE-4S Connector Card. |
| I32 ethernetGE4SCCCardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.28.1.5 | Integer32 | read-only | Voltage of the Ethernet GE-4S Connector Card. |
| I32 ethernetGE4SCCCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.28.1.6 | Integer32 | read-only | Temperature of the Ethernet GE-4S Connector Card. |
| RES ethernetGE4SCCCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.28.1.7 | RestartType | read-write | Allows to perform specified action on the Ethernet GE-4S Connector card. |
| STO ethernetGE4SCCCardStorageType | 1.3.6.1.4.1.2544.1.12.3.1.28.1.8 | StorageType | read-create | The type of storage configured for this entry. |
| ROW ethernetGE4SCCCardRowStatus | 1.3.6.1.4.1.2544.1.12.3.1.28.1.9 | RowStatus | read-create | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ethernetGE4SCCCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ethernetGE4SCCCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ethernetGE4SCCCardRowStatus object may be modified if the associated instance of this object is equal to active(1). |
| ethernetGE4ECCCardTable | 1.3.6.1.4.1.2544.1.12.3.1.29 | not-accessible | Contains information on Ethernet GE206V Optical Port Expander Cards. These are supported on the FSP150CC GE206V product. | |
| ethernetGE4ECCCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.29.1 | not-accessible | A conceptual row in the ethernetGE4ECCCardTable. | |
| PHY ethernetGE4ECCCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.29.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet GE-4S Connector Card. |
| ADM ethernetGE4ECCCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.29.1.2 | AdminState | read-write | Administrative State of the Ethernet GE-4S Connector Card. |
| OPE ethernetGE4ECCCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.29.1.3 | OperationalState | read-only | Operational State of the Ethernet GE-4S Connector Card. |
| SEC ethernetGE4ECCCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.29.1.4 | SecondaryState | read-only | Secondary State of the Ethernet GE-4S Connector Card. |
| I32 ethernetGE4ECCCardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.29.1.5 | Integer32 | read-only | Voltage of the Ethernet GE-4S Connector Card. |
| I32 ethernetGE4ECCCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.29.1.6 | Integer32 | read-only | Temperature of the Ethernet GE-4S Connector Card. |
| RES ethernetGE4ECCCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.29.1.7 | RestartType | read-write | Allows to perform specified action on the Ethernet GE-4S Connector card. |
| STO ethernetGE4ECCCardStorageType | 1.3.6.1.4.1.2544.1.12.3.1.29.1.8 | StorageType | read-create | The type of storage configured for this entry. |
| ROW ethernetGE4ECCCardRowStatus | 1.3.6.1.4.1.2544.1.12.3.1.29.1.9 | RowStatus | read-create | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ethernetGE4ECCCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ethernetGE4ECCCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ethernetGE4ECCCardRowStatus object may be modified if the associated instance of this object is equal to active(1). |
| ethernetNTEXG210CardTable | 1.3.6.1.4.1.2544.1.12.3.1.30 | not-accessible | Contains information on Ethernet NTE XG210 Cards. These are supported on the FSP150CC XG210 product. | |
| ethernetNTEXG210CardEntry | 1.3.6.1.4.1.2544.1.12.3.1.30.1 | not-accessible | A conceptual row in the ethernetNTEXG210CardTable. | |
| PHY ethernetNTEXG210CardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.30.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE XG210 Card. |
| ADM ethernetNTEXG210CardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.30.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE XG210 Card. |
| OPE ethernetNTEXG210CardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.30.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE XG210 Card. |
| SEC ethernetNTEXG210CardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.30.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE XG210 Card. |
| I32 ethernetNTEXG210CardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.30.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE XG210 Card. |
| I32 ethernetNTEXG210CardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.30.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE XG210 Card. |
| T/F ethernetNTEXG210CardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.30.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE XG210 Card. |
| RES ethernetNTEXG210CardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.30.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE XG210 card. |
| NUM ethernetNTEXG210CardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.30.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| ethernetXG1XCCCardTable | 1.3.6.1.4.1.2544.1.12.3.1.31 | not-accessible | Contains information on Ethernet XG210/SH1PCS XFP Port Expander Cards. These are supported on the FSP150CC XG210, SH1PCS products. | |
| ethernetXG1XCCCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.31.1 | not-accessible | A conceptual row in the ethernetXG1XCCCardTable. | |
| PHY ethernetXG1XCCCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.31.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet XG-1-XFP Connector Card. |
| ADM ethernetXG1XCCCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.31.1.2 | AdminState | read-write | Administrative State of the Ethernet XG-1-XFP Connector Card. |
| OPE ethernetXG1XCCCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.31.1.3 | OperationalState | read-only | Operational State of the Ethernet XG-1-XFP Connector Card. |
| SEC ethernetXG1XCCCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.31.1.4 | SecondaryState | read-only | Secondary State of the Ethernet XG-1-XFP Connector Card. |
| I32 ethernetXG1XCCCardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.31.1.5 | Integer32 | read-only | Voltage of the Ethernet XG-1-XFP Connector Card. |
| I32 ethernetXG1XCCCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.31.1.6 | Integer32 | read-only | Temperature of the Ethernet XG-1-XFP Connector Card. |
| RES ethernetXG1XCCCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.31.1.7 | RestartType | read-write | Allows to perform specified action on the Ethernet XG-1-XFP Connector card. |
| STO ethernetXG1XCCCardStorageType | 1.3.6.1.4.1.2544.1.12.3.1.31.1.8 | StorageType | read-create | The type of storage configured for this entry. |
| ROW ethernetXG1XCCCardRowStatus | 1.3.6.1.4.1.2544.1.12.3.1.31.1.9 | RowStatus | read-create | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ethernetXG1XCCCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ethernetXG1XCCCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ethernetXG1XCCCardRowStatus object may be modified if the associated instance of this object is equal to active(1). |
| ethernetXG1SCCCardTable | 1.3.6.1.4.1.2544.1.12.3.1.32 | not-accessible | Contains information on Ethernet XG210/SH1PCS SFP+ Port Expander Cards. These are supported on the FSP150CC XG210, SH1PCS products. | |
| ethernetXG1SCCCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.32.1 | not-accessible | A conceptual row in the ethernetXG1SCCCardTable. | |
| PHY ethernetXG1SCCCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.32.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet XG-1-SFP+ Connector Card. |
| ADM ethernetXG1SCCCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.32.1.2 | AdminState | read-write | Administrative State of the Ethernet XG-1-SFP+ Connector Card. |
| OPE ethernetXG1SCCCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.32.1.3 | OperationalState | read-only | Operational State of the Ethernet XG-1-SFP+ Connector Card. |
| SEC ethernetXG1SCCCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.32.1.4 | SecondaryState | read-only | Secondary State of the Ethernet XG-1-SFP+ Connector Card. |
| I32 ethernetXG1SCCCardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.32.1.5 | Integer32 | read-only | Voltage of the Ethernet XG-1-SFP+ Connector Card. |
| I32 ethernetXG1SCCCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.32.1.6 | Integer32 | read-only | Temperature of the Ethernet XG-1-SFP+ Connector Card. |
| RES ethernetXG1SCCCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.32.1.7 | RestartType | read-write | Allows to perform specified action on the Ethernet XG-1-SFP+ Connector card. |
| STO ethernetXG1SCCCardStorageType | 1.3.6.1.4.1.2544.1.12.3.1.32.1.8 | StorageType | read-create | The type of storage configured for this entry. |
| ROW ethernetXG1SCCCardRowStatus | 1.3.6.1.4.1.2544.1.12.3.1.32.1.9 | RowStatus | read-create | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ethernetXG1SCCCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ethernetXG1SCCCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ethernetXG1SCCCardRowStatus object may be modified if the associated instance of this object is equal to active(1). |
| ethernetOverOCSTMCardTable | 1.3.6.1.4.1.2544.1.12.3.1.33 | not-accessible | Contains information on STM1-4-ET Cards. | |
| ethernetOverOCSTMCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.33.1 | not-accessible | A conceptual row in the ethernetOverOCSTMCardTable. | |
| PHY ethernetOverOCSTMCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.33.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the STM1-4-ET Card. |
| ADM ethernetOverOCSTMCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.33.1.2 | AdminState | read-write | Administrative State of the STM1-4-ET Card. |
| OPE ethernetOverOCSTMCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.33.1.3 | OperationalState | read-only | Operational State of the STM1-4-ET Card. |
| SEC ethernetOverOCSTMCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.33.1.4 | SecondaryState | read-only | Secondary State of the STM1-4-ET Card. |
| I32 ethernetOverOCSTMCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.33.1.5 | Integer32 | read-only | Temperature of the STM1-4-ET Card. |
| T/F ethernetOverOCSTMCardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.33.1.6 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the STM1-4-ET Card. |
| RES ethernetOverOCSTMCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.33.1.7 | RestartType | read-write | Allows to perform specified action on the STM1-4-ET card. |
| STO ethernetOverOCSTMCardStorageType | 1.3.6.1.4.1.2544.1.12.3.1.33.1.8 | StorageType | read-create | The type of storage configured for this entry. |
| ROW ethernetOverOCSTMCardRowStatus | 1.3.6.1.4.1.2544.1.12.3.1.33.1.9 | RowStatus | read-create | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ethernetOverOCSTMCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ethernet10x1GCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ethernetOverOCSTMCardRowStatus object may be modified if the associated instance of this object is equal to active(1). |
| T/F ethernetOverOCSTMCardForceOffLineAction | 1.3.6.1.4.1.2544.1.12.3.1.33.1.10 | TruthValue | read-write | On some condition, user wishes to make one card out of service and hold the reset signal of the card via AMI. When force offline is enabled, reset signal is held; When force offline is disabled, reset signal is released. |
| POR ethernetOverOCSTMCardMode | 1.3.6.1.4.1.2544.1.12.3.1.33.1.11 | PortCarrierType | read-write | This attribute is to show/set the SONET/SDH mode and OC3/OC12/STM1/STM4 speed for SONET/SDH.. |
| pseudoWireOcnStmCardTable | 1.3.6.1.4.1.2544.1.12.3.1.34 | not-accessible | Contains information on Pseudo Wire OCN STM Cards. These are supported on the FSP150CC GE206v product. | |
| pseudoWireOcnStmCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.34.1 | not-accessible | A conceptual row in the pseudoWireOcnStmCardTable. | |
| PHY pseudoWireOcnStmCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.34.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Pseudo Wire OCN/STM Card. |
| ADM pseudoWireOcnStmCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.34.1.2 | AdminState | read-write | Administrative State of the Pseudo Wire OCN/STM Card. |
| OPE pseudoWireOcnStmCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.34.1.3 | OperationalState | read-only | Operational State of the Pseudo Wire OCN/STM Card. |
| SEC pseudoWireOcnStmCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.34.1.4 | SecondaryState | read-only | Secondary State of the Pseudo Wire OCN/STM Card. |
| IP pseudoWireOcnStmCardIpAddress | 1.3.6.1.4.1.2544.1.12.3.1.34.1.5 | IpAddress | read-write | IP Address associated with the Pseudo Wire OCN/STM Card. |
| PWE pseudoWireOcnStmCardMode | 1.3.6.1.4.1.2544.1.12.3.1.34.1.6 | PWE3OCNSTMCardMode | read-write | Card Mode of with the Pseudo Wire OCN/STM Card. |
| I32 pseudoWireOcnStmCardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.34.1.7 | Integer32 | read-only | Voltage of the Pseudo Wire OCN/STM Card. |
| I32 pseudoWireOcnStmCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.34.1.8 | Integer32 | read-only | Temperature of the Pseudo Wire OCN/STM Card. |
| RES pseudoWireOcnStmCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.34.1.9 | RestartType | read-write | Allows to perform specified action on the Pseudo Wire OCN/STM card. |
| STO pseudoWireOcnStmCardStorageType | 1.3.6.1.4.1.2544.1.12.3.1.34.1.10 | StorageType | read-create | The type of storage configured for this entry. |
| ROW pseudoWireOcnStmCardRowStatus | 1.3.6.1.4.1.2544.1.12.3.1.34.1.11 | RowStatus | read-create | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of pseudoWireOcnStmCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with pseudoWireOcnStmCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The pseudoWireOcnStmCardRowStatus object may be modified if the associated instance of this object is equal to active(1). |
| PSN pseudoWireOcnStmCardPSNEncapsulation | 1.3.6.1.4.1.2544.1.12.3.1.34.1.12 | PSNEncapsulationMode | read-write | This object specifies Packet Switched Network demultiplexing layer header type of the pseudo-wire packets. |
| TDM pseudoWireOcnStmCardFreqSourceType | 1.3.6.1.4.1.2544.1.12.3.1.34.1.13 | TDMFrequencySourceType | read-write | This object represents the TDM Frequency source type of OC/STM card. |
| NUM pseudoWireOcnStmCardFreqSource | 1.3.6.1.4.1.2544.1.12.3.1.34.1.14 | VariablePointer | read-write | This object represents the TDM Frequency source of OC/STM card. |
| T/F pseudoWireOcnStmCardForceOffLineAction | 1.3.6.1.4.1.2544.1.12.3.1.34.1.15 | TruthValue | read-write | On some condition, user wishes to make one card out of service and hold the reset signal of the card via AMI. When force offline is enabled, reset signal is held; When force offline is disabled, reset signal is released. |
| pseudoWireE1T1CardTable | 1.3.6.1.4.1.2544.1.12.3.1.35 | not-accessible | Contains information on Pseudo Wire T1/E1 Cards. These are supported on the FSP150CC GE206v product. | |
| pseudoWireE1T1CardEntry | 1.3.6.1.4.1.2544.1.12.3.1.35.1 | not-accessible | A conceptual row in the pseudoWireE1T1CardTable. | |
| PHY pseudoWireE1T1CardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.35.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Pseudo Wire T1/E1 Card. |
| ADM pseudoWireE1T1CardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.35.1.2 | AdminState | read-write | Administrative State of the Pseudo Wire T1/E1 Card. |
| OPE pseudoWireE1T1CardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.35.1.3 | OperationalState | read-only | Operational State of the Pseudo Wire T1/E1 Card. |
| SEC pseudoWireE1T1CardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.35.1.4 | SecondaryState | read-only | Secondary State of the Pseudo Wire T1/E1 Card. |
| IP pseudoWireE1T1CardIpAddress | 1.3.6.1.4.1.2544.1.12.3.1.35.1.5 | IpAddress | read-write | IP Address associated with the Pseudo Wire T1/E1 Card. |
| PWE pseudoWireE1T1CardMode | 1.3.6.1.4.1.2544.1.12.3.1.35.1.6 | PWE3E1T1CardMode | read-write | Card Mode of with the Pseudo Wire T1/E1 Card. |
| I32 pseudoWireE1T1CardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.35.1.7 | Integer32 | read-only | Voltage of the Pseudo Wire T1/E1 Card. |
| I32 pseudoWireE1T1CardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.35.1.8 | Integer32 | read-only | Temperature of the Pseudo Wire T1/E1 Card. |
| RES pseudoWireE1T1CardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.35.1.9 | RestartType | read-write | Allows to perform specified action on the Pseudo Wire T1/E1 card. |
| STO pseudoWireE1T1CardStorageType | 1.3.6.1.4.1.2544.1.12.3.1.35.1.10 | StorageType | read-create | The type of storage configured for this entry. |
| ROW pseudoWireE1T1CardRowStatus | 1.3.6.1.4.1.2544.1.12.3.1.35.1.11 | RowStatus | read-create | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of pseudoWireE1T1CardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with pseudoWireE1T1CardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The pseudoWireE1T1CardRowStatus object may be modified if the associated instance of this object is equal to active(1). |
| PSN pseudoWireE1T1CardPSNEncapsulation | 1.3.6.1.4.1.2544.1.12.3.1.35.1.12 | PSNEncapsulationMode | read-write | This object specifies Packet Switched Network demultiplexing layer header type of the pseudo-wire packets. |
| ethernet1x10GHighPerCardTable | 1.3.6.1.4.1.2544.1.12.3.1.36 | not-accessible | Contains information on Ethernet 1x10G High Performance Cards. | |
| ethernet1x10GHighPerCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.36.1 | not-accessible | A conceptual row in the ethernet1x10GHighPerCardTable. | |
| PHY ethernet1x10GHighPerCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.36.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet 1x10G High Performance Card. |
| ADM ethernet1x10GHighPerCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.36.1.2 | AdminState | read-write | Administrative State of the Ethernet 1x10G High Performance Card. |
| OPE ethernet1x10GHighPerCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.36.1.3 | OperationalState | read-only | Operational State of the Ethernet 1x10G High Performance Card. |
| SEC ethernet1x10GHighPerCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.36.1.4 | SecondaryState | read-only | Secondary State of the Ethernet 1x10G High Performance Card. |
| I32 ethernet1x10GHighPerCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.36.1.5 | Integer32 | read-only | Temperature of the Ethernet 1x10G High Performance Card. |
| T/F ethernet1x10GHighPerCardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.36.1.6 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet 1x10G High Performance Card. |
| RES ethernet1x10GHighPerCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.36.1.7 | RestartType | read-write | Allows to perform specified action on the Ethernet 1x10G High Performance card. |
| STO ethernet1x10GHighPerCardStorageType | 1.3.6.1.4.1.2544.1.12.3.1.36.1.8 | StorageType | read-create | The type of storage configured for this entry. |
| ROW ethernet1x10GHighPerCardRowStatus | 1.3.6.1.4.1.2544.1.12.3.1.36.1.9 | RowStatus | read-create | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ethernet1x10GHighPerCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ethernetNTUCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ethernet1x10GHighPerCardRowStatus object may be modified if the associated instance of this object is equal to active(1). |
| T/F ethernet1x10GHighPerCardForceOffLineAction | 1.3.6.1.4.1.2544.1.12.3.1.36.1.10 | TruthValue | read-write | On some condition, user wishes to make one card out of service and hold the reset signal of the card via AMI. When force offline is enabled, reset signal is held; When force offline is disabled, reset signal is released. |
| ethernet10x1GHighPerCardTable | 1.3.6.1.4.1.2544.1.12.3.1.37 | not-accessible | Contains information on Ethernet 10x1G High Performance Cards. | |
| ethernet10x1GHighPerCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.37.1 | not-accessible | A conceptual row in the ethernet10x1GHighPerCardTable. | |
| PHY ethernet10x1GHighPerCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.37.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet 10x1G High Performance Card. |
| ADM ethernet10x1GHighPerCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.37.1.2 | AdminState | read-write | Administrative State of the Ethernet 10x1G High Performance Card. |
| OPE ethernet10x1GHighPerCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.37.1.3 | OperationalState | read-only | Operational State of the Ethernet 10x1G High Performance Card. |
| SEC ethernet10x1GHighPerCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.37.1.4 | SecondaryState | read-only | Secondary State of the Ethernet 10x1G High Performance Card. |
| I32 ethernet10x1GHighPerCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.37.1.5 | Integer32 | read-only | Temperature of the Ethernet 10x1G High Performance Card. |
| T/F ethernet10x1GHighPerCardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.37.1.6 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet 10x1G High Performance Card. |
| RES ethernet10x1GHighPerCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.37.1.7 | RestartType | read-write | Allows to perform specified action on the Ethernet 10x1G High Performance card. |
| STO ethernet10x1GHighPerCardStorageType | 1.3.6.1.4.1.2544.1.12.3.1.37.1.8 | StorageType | read-create | The type of storage configured for this entry. |
| ROW ethernet10x1GHighPerCardRowStatus | 1.3.6.1.4.1.2544.1.12.3.1.37.1.9 | RowStatus | read-create | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ethernet10x1GHighPerCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ethernet10x1GHighPerCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ethernet10x1GHighPerCardRowStatus object may be modified if the associated instance of this object is equal to active(1). |
| T/F ethernet10x1GHighPerCardForceOffLineAction | 1.3.6.1.4.1.2544.1.12.3.1.37.1.10 | TruthValue | read-write | On some condition, user wishes to make one card out of service and hold the reset signal of the card via AMI. When force offline is enabled, reset signal is held; When force offline is disabled, reset signal is released. |
| ethernetNTET1804CardTable | 1.3.6.1.4.1.2544.1.12.3.1.38 | not-accessible | Contains information on Ethernet NTE T1804 Cards. These are supported on the FSP150CC T1804 product. | |
| ethernetNTET1804CardEntry | 1.3.6.1.4.1.2544.1.12.3.1.38.1 | not-accessible | A conceptual row in the ethernetNTET1804CardTable. | |
| PHY ethernetNTET1804CardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.38.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE T1804 Card. |
| ADM ethernetNTET1804CardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.38.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE T1804 Card. |
| OPE ethernetNTET1804CardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.38.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE T1804 Card. |
| SEC ethernetNTET1804CardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.38.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE T1804 Card. |
| I32 ethernetNTET1804CardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.38.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE GE112S Card. |
| I32 ethernetNTET1804CardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.38.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE T1804 Card. |
| T/F ethernetNTET1804CardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.38.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE T1804 Card. |
| RES ethernetNTET1804CardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.38.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE T1804 card. |
| NUM ethernetNTET1804CardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.38.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| POR ethernetNTET1804CardMode | 1.3.6.1.4.1.2544.1.12.3.1.38.1.10 | PortCarrierType | read-write | This attribute is to show/set E1/T1 mode of the NET T1804 card. |
| ethernetNTET3204CardTable | 1.3.6.1.4.1.2544.1.12.3.1.39 | not-accessible | Contains information on Ethernet NTE T3204 Cards. These are supported on the FSP150CC T3204 product. | |
| ethernetNTET3204CardEntry | 1.3.6.1.4.1.2544.1.12.3.1.39.1 | not-accessible | A conceptual row in the ethernetNTET3204CardTable. | |
| PHY ethernetNTET3204CardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.39.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE T3204 Card. |
| ADM ethernetNTET3204CardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.39.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE T3204 Card. |
| OPE ethernetNTET3204CardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.39.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE T3204 Card. |
| SEC ethernetNTET3204CardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.39.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE T3204 Card. |
| I32 ethernetNTET3204CardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.39.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE GE112S Card. |
| I32 ethernetNTET3204CardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.39.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE T3204 Card. |
| T/F ethernetNTET3204CardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.39.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE T3204 Card. |
| RES ethernetNTET3204CardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.39.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE T3204 card. |
| NUM ethernetNTET3204CardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.39.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| POR ethernetNTET3204CardMode | 1.3.6.1.4.1.2544.1.12.3.1.39.1.10 | PortCarrierType | read-write | This attribute is to show/set E3/T3 mode of the NET T3204 card. |
| ethernetNTEGESyncProbeCardTable | 1.3.6.1.4.1.2544.1.12.3.1.40 | not-accessible | Contains information on Ethernet NTE-GE SyncProbe Card. These are supported on the FSP150CC GE SyncProbe product. | |
| ethernetNTEGESyncProbeCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.40.1 | not-accessible | A conceptual row in the ethernetNTEGESyncProbeCardTable. | |
| PHY ethernetNTEGESyncProbeCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.40.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE GE SyncProbe Card. |
| ADM ethernetNTEGESyncProbeCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.40.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE GE SyncProbe Card. |
| OPE ethernetNTEGESyncProbeCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.40.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE GE SyncProbe Card. |
| SEC ethernetNTEGESyncProbeCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.40.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE GE SyncProbe Card. |
| I32 ethernetNTEGESyncProbeCardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.40.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE GE SyncProbe Card. |
| I32 ethernetNTEGESyncProbeCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.40.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE GE SyncProbe Card. |
| T/F ethernetNTEGESyncProbeCardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.40.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE SyncProbe Card. |
| RES ethernetNTEGESyncProbeCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.40.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE GE SyncProbe card. |
| NUM ethernetNTEGESyncProbeCardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.40.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| ethernetGE8SCCCardTable | 1.3.6.1.4.1.2544.1.12.3.1.41 | not-accessible | Contains information on Ethernet XG210/SH1PCS Optical Port Expander Cards. These are supported on the FSP150CC XG210, SH1PCS product. | |
| ethernetGE8SCCCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.41.1 | not-accessible | A conceptual row in the ethernetGE8SCCCardTable. | |
| PHY ethernetGE8SCCCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.41.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet GE-8S Connector Card. |
| ADM ethernetGE8SCCCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.41.1.2 | AdminState | read-write | Administrative State of the Ethernet GE-8S Connector Card. |
| OPE ethernetGE8SCCCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.41.1.3 | OperationalState | read-only | Operational State of the Ethernet GE-8S Connector Card. |
| SEC ethernetGE8SCCCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.41.1.4 | SecondaryState | read-only | Secondary State of the Ethernet GE-8S Connector Card. |
| I32 ethernetGE8SCCCardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.41.1.5 | Integer32 | read-only | Voltage of the Ethernet GE-8S Connector Card. |
| I32 ethernetGE8SCCCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.41.1.6 | Integer32 | read-only | Temperature of the Ethernet GE-8S Connector Card. |
| RES ethernetGE8SCCCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.41.1.7 | RestartType | read-write | Allows to perform specified action on the Ethernet GE-8S Connector card. |
| STO ethernetGE8SCCCardStorageType | 1.3.6.1.4.1.2544.1.12.3.1.41.1.8 | StorageType | read-create | The type of storage configured for this entry. |
| ROW ethernetGE8SCCCardRowStatus | 1.3.6.1.4.1.2544.1.12.3.1.41.1.9 | RowStatus | read-create | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ethernetGE8SCCCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ethernetGE8SCCCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ethernetGE8SCCCardRowStatus object may be modified if the associated instance of this object is equal to active(1). |
| ethernetNTEGE114HCardTable | 1.3.6.1.4.1.2544.1.12.3.1.42 | not-accessible | Contains information on Ethernet NTE GE114H Cards. These are supported on the FSP150CC GE114H product. | |
| ethernetNTEGE114HCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.42.1 | not-accessible | A conceptual row in the ethernetNTEGE114HCardTable. | |
| PHY ethernetNTEGE114HCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.42.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE GE114H Card. |
| ADM ethernetNTEGE114HCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.42.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE GE114H Card. |
| OPE ethernetNTEGE114HCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.42.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE GE114H Card. |
| SEC ethernetNTEGE114HCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.42.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE GE114H Card. |
| I32 ethernetNTEGE114HCardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.42.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE GE112 Card. |
| I32 ethernetNTEGE114HCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.42.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE GE114H Card. |
| T/F ethernetNTEGE114HCardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.42.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114H Card. |
| RES ethernetNTEGE114HCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.42.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE GE114H card. |
| NUM ethernetNTEGE114HCardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.42.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| NUM ethernetNTEGE114HCardSwitchPortActionPort | 1.3.6.1.4.1.2544.1.12.3.1.42.1.10 | VariablePointer | read-create | Which port to perform specified switch action on the Ethernet NTE GE114H card. |
| SWI ethernetNTEGE114HCardSwitchPortAction | 1.3.6.1.4.1.2544.1.12.3.1.42.1.11 | SwitchPortAction | read-write | Allows to perform specified action on the Ethernet NTE GE114H card. |
| ethernetNTEGE114PHCardTable | 1.3.6.1.4.1.2544.1.12.3.1.43 | not-accessible | Contains information on Ethernet NTE GE114PH Cards. These are supported on the FSP150CC GE114PH product. | |
| ethernetNTEGE114PHCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.43.1 | not-accessible | A conceptual row in the ethernetNTEGE114PHCardTable. | |
| PHY ethernetNTEGE114PHCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.43.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE GE114PH Card. |
| ADM ethernetNTEGE114PHCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.43.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE GE114PH Card. |
| OPE ethernetNTEGE114PHCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.43.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE GE114PH Card. |
| SEC ethernetNTEGE114PHCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.43.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE GE114PH Card. |
| I32 ethernetNTEGE114PHCardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.43.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE GE112 Card. |
| I32 ethernetNTEGE114PHCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.43.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE GE114PH Card. |
| T/F ethernetNTEGE114PHCardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.43.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114PH Card. |
| RES ethernetNTEGE114PHCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.43.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE GE114PH card. |
| NUM ethernetNTEGE114PHCardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.43.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| NUM ethernetNTEGE114PHCardSwitchPortActionPort | 1.3.6.1.4.1.2544.1.12.3.1.43.1.10 | VariablePointer | read-create | Which port to perform specified switch action on the Ethernet NTE GE114PH card. |
| SWI ethernetNTEGE114PHCardSwitchPortAction | 1.3.6.1.4.1.2544.1.12.3.1.43.1.11 | SwitchPortAction | read-write | Allows to perform specified action on the Ethernet NTE GE114PH card. |
| ethernetFE36ECardTable | 1.3.6.1.4.1.2544.1.12.3.1.44 | not-accessible | Contains information on Ethernet 36x100M Cards. | |
| ethernetFE36ECardEntry | 1.3.6.1.4.1.2544.1.12.3.1.44.1 | not-accessible | A conceptual row in the ethernetFE36ECardTable. | |
| PHY ethernetFE36ECardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.44.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet FE36E Card. |
| ADM ethernetFE36ECardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.44.1.2 | AdminState | read-write | Administrative State of the Ethernet FE36E Card. |
| OPE ethernetFE36ECardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.44.1.3 | OperationalState | read-only | Operational State of the Ethernet FE36E Card. |
| SEC ethernetFE36ECardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.44.1.4 | SecondaryState | read-only | Secondary State of the Ethernet FE36E Card. |
| I32 ethernetFE36ECardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.44.1.5 | Integer32 | read-only | Temperature of the Ethernet FE36E Card. |
| RES ethernetFE36ECardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.44.1.6 | RestartType | read-write | Allows to perform specified action on the Ethernet FE36E card. |
| STO ethernetFE36ECardStorageType | 1.3.6.1.4.1.2544.1.12.3.1.44.1.7 | StorageType | read-create | The type of storage configured for this entry. |
| ROW ethernetFE36ECardRowStatus | 1.3.6.1.4.1.2544.1.12.3.1.44.1.8 | RowStatus | read-create | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ethernetFE36ECardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ethernetNTUCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ethernetFE36ECardRowStatus object may be modified if the associated instance of this object is equal to active(1). |
| T/F ethernetFE36ECardForceOffLineAction | 1.3.6.1.4.1.2544.1.12.3.1.44.1.9 | TruthValue | read-write | On some condition, user wishes to make one card out of service and hold the reset signal of the card via AMI. When force offline is enabled, reset signal is held; When force offline is disabled, reset signal is released. |
| T/F ethernetFE36ECard8023azEnabled | 1.3.6.1.4.1.2544.1.12.3.1.44.1.10 | TruthValue | read-write | This object describes whether enable 802.3az energy efficient. |
| ethernetNTEGE114SHCardTable | 1.3.6.1.4.1.2544.1.12.3.1.45 | not-accessible | Contains information on Ethernet NTE GE114SH Cards. These are supported on the FSP150CC GE114SH product. | |
| ethernetNTEGE114SHCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.45.1 | not-accessible | A conceptual row in the ethernetNTEGE114SHCardTable. | |
| PHY ethernetNTEGE114SHCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.45.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE GE114SH Card. |
| ADM ethernetNTEGE114SHCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.45.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE GE114SH Card. |
| OPE ethernetNTEGE114SHCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.45.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE GE114SH Card. |
| SEC ethernetNTEGE114SHCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.45.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE GE114SH Card. |
| I32 ethernetNTEGE114SHCardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.45.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE GE112 Card. |
| I32 ethernetNTEGE114SHCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.45.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE GE114SH Card. |
| T/F ethernetNTEGE114SHCardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.45.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114SH Card. |
| RES ethernetNTEGE114SHCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.45.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE GE114SH card. |
| NUM ethernetNTEGE114SHCardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.45.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| NUM ethernetNTEGE114SHCardSwitchPortActionPort | 1.3.6.1.4.1.2544.1.12.3.1.45.1.10 | VariablePointer | read-create | Which port to perform specified switch action on the Ethernet NTE GE114SH card. |
| SWI ethernetNTEGE114SHCardSwitchPortAction | 1.3.6.1.4.1.2544.1.12.3.1.45.1.11 | SwitchPortAction | read-write | Allows to perform specified action on the Ethernet NTE GE114SH card. |
| ethernetNTEGE114SCardTable | 1.3.6.1.4.1.2544.1.12.3.1.46 | not-accessible | Contains information on Ethernet NTE GE114S Cards. These are supported on the FSP150CC GE114S product. | |
| ethernetNTEGE114SCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.46.1 | not-accessible | A conceptual row in the ethernetNTEGE114SCardTable. | |
| PHY ethernetNTEGE114SCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.46.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE GE114S Card. |
| ADM ethernetNTEGE114SCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.46.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE GE114S Card. |
| OPE ethernetNTEGE114SCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.46.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE GE114S Card. |
| SEC ethernetNTEGE114SCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.46.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE GE114S Card. |
| I32 ethernetNTEGE114SCardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.46.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE GE112S Card. |
| I32 ethernetNTEGE114SCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.46.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE GE114S Card. |
| T/F ethernetNTEGE114SCardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.46.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114S Card. |
| RES ethernetNTEGE114SCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.46.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE GE114S card. |
| NUM ethernetNTEGE114SCardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.46.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| NUM ethernetNTEGE114SCardSwitchPortActionPort | 1.3.6.1.4.1.2544.1.12.3.1.46.1.10 | VariablePointer | read-create | Which port to perform specified switch action on the Ethernet NTE GE114S card. |
| SWI ethernetNTEGE114SCardSwitchPortAction | 1.3.6.1.4.1.2544.1.12.3.1.46.1.11 | SwitchPortAction | read-write | Allows to perform specified action on the Ethernet NTE GE114S card. |
| stuHighPerCardTable | 1.3.6.1.4.1.2544.1.12.3.1.47 | not-accessible | Contains information on STU Cards. | |
| stuHighPerCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.47.1 | not-accessible | A conceptual row in the stuHighPerCardTable. | |
| PHY stuHighPerCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.47.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the STU High Performance Card. |
| ADM stuHighPerCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.47.1.2 | AdminState | read-write | Administrative State of the Stu High Performance Card. |
| OPE stuHighPerCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.47.1.3 | OperationalState | read-only | Operational State of the Stu High Performance Card. |
| SEC stuHighPerCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.47.1.4 | SecondaryState | read-only | Secondary State of the Stu High Performance Card. |
| I32 stuHighPerCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.47.1.5 | Integer32 | read-only | Temperature of the Stu High Performance Card. |
| RES stuHighPerCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.47.1.6 | RestartType | read-write | Allows to perform specified action on the Stu High Performance card. |
| STO stuHighPerCardStorageType | 1.3.6.1.4.1.2544.1.12.3.1.47.1.7 | StorageType | read-create | The type of storage configured for this entry. |
| ROW stuHighPerCardRowStatus | 1.3.6.1.4.1.2544.1.12.3.1.47.1.8 | RowStatus | read-create | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of stuHighPerCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with stuRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The stuHighPerCardRowStatus object may be modified if the associated instance of this object is equal to active(1). |
| T/F stuHighPerCardForceOffLineAction | 1.3.6.1.4.1.2544.1.12.3.1.47.1.9 | TruthValue | read-write | On some condition, user wishes to make one card out of service and hold the reset signal of the card via AMI. When force offline is enabled, reset signal is held; When force offline is disabled, reset signal is released. |
| stiHighPerTable | 1.3.6.1.4.1.2544.1.12.3.1.48 | not-accessible | Contains information on STI within the Shelf. | |
| stiHighPerEntry | 1.3.6.1.4.1.2544.1.12.3.1.48.1 | not-accessible | A conceptual row in the stiTable. | |
| PHY stiHighPerEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.48.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the STI High Per card. |
| ADM stiHighPerAdminState | 1.3.6.1.4.1.2544.1.12.3.1.48.1.2 | AdminState | read-write | Administrative State of the STI. |
| OPE stiHighPerOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.48.1.3 | OperationalState | read-only | Operational State of the STI. |
| SEC stiHighPerSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.48.1.4 | SecondaryState | read-only | Secondary State of the STI. |
| I32 stiHighPerTemperature | 1.3.6.1.4.1.2544.1.12.3.1.48.1.5 | Integer32 | read-only | Temperature of the STI. |
| STO stiHighPerStorageType | 1.3.6.1.4.1.2544.1.12.3.1.48.1.6 | StorageType | read-create | The type of storage configured for this entry. |
| ROW stiHighPerRowStatus | 1.3.6.1.4.1.2544.1.12.3.1.48.1.7 | RowStatus | read-create | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of stiRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with stiRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The stiRowStatus object may be modified if the associated instance of this object is equal to active(1). |
| ethernetGE8ECCCardTable | 1.3.6.1.4.1.2544.1.12.3.1.49 | not-accessible | Contains information on Ethernet XG210 Optical Port Expander Cards. These are supported on the FSP150CC XG210, SH1PCS products. | |
| ethernetGE8ECCCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.49.1 | not-accessible | A conceptual row in the ethernetGE8ECCCardTable. | |
| PHY ethernetGE8ECCCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.49.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet GE-8S Connector Card. |
| ADM ethernetGE8ECCCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.49.1.2 | AdminState | read-write | Administrative State of the Ethernet GE-8S Connector Card. |
| OPE ethernetGE8ECCCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.49.1.3 | OperationalState | read-only | Operational State of the Ethernet GE-8S Connector Card. |
| SEC ethernetGE8ECCCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.49.1.4 | SecondaryState | read-only | Secondary State of the Ethernet GE-8S Connector Card. |
| I32 ethernetGE8ECCCardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.49.1.5 | Integer32 | read-only | Voltage of the Ethernet GE-8S Connector Card. |
| I32 ethernetGE8ECCCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.49.1.6 | Integer32 | read-only | Temperature of the Ethernet GE-8S Connector Card. |
| RES ethernetGE8ECCCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.49.1.7 | RestartType | read-write | Allows to perform specified action on the Ethernet GE-8S Connector card. |
| STO ethernetGE8ECCCardStorageType | 1.3.6.1.4.1.2544.1.12.3.1.49.1.8 | StorageType | read-create | The type of storage configured for this entry. |
| ROW ethernetGE8ECCCardRowStatus | 1.3.6.1.4.1.2544.1.12.3.1.49.1.9 | RowStatus | read-create | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ethernetGE8ECCCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ethernetGE8ECCCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ethernetGE8ECCCardRowStatus object may be modified if the associated instance of this object is equal to active(1). |
| networkElementLLDPParamsTable | 1.3.6.1.4.1.2544.1.12.3.1.50 | not-accessible | Entries may be auto discovered, or can be explicitly created by SNMP Manager. Each remotely discovered shelf is represented as a row in this table. | |
| networkElementLLDPParamsEntry | 1.3.6.1.4.1.2544.1.12.3.1.50.1 | not-accessible | A conceptual row in the networkElementLLDPParamsTable. | |
| LLD neLLDPParamsLLDPEnableAction | 1.3.6.1.4.1.2544.1.12.3.1.50.1.1 | LLDPEnableAction | read-create | This object allows user enable or disable LLDP on all the ports in the NE. |
| ethernetNTESH1PCSCardTable | 1.3.6.1.4.1.2544.1.12.3.1.51 | not-accessible | Contains information on Ethernet NTE SH1PCS Cards. These are supported on the FSP150CC SH1PCS product. | |
| ethernetNTESH1PCSCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.51.1 | not-accessible | A conceptual row in the ethernetNTESH1PCSCardTable. | |
| PHY ethernetNTESH1PCSCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.51.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE SH1PCS Card. |
| ADM ethernetNTESH1PCSCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.51.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE SH1PCS Card. |
| OPE ethernetNTESH1PCSCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.51.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE SH1PCS Card. |
| SEC ethernetNTESH1PCSCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.51.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE SH1PCS Card. |
| I32 ethernetNTESH1PCSCardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.51.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE SH1PCS Card. |
| I32 ethernetNTESH1PCSCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.51.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE SH1PCS Card. |
| T/F ethernetNTESH1PCSCardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.51.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE SH1PCS Card. |
| RES ethernetNTESH1PCSCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.51.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE SH1PCS card. |
| NUM ethernetNTESH1PCSCardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.51.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| ethernetNTEOSA5411CardTable | 1.3.6.1.4.1.2544.1.12.3.1.52 | not-accessible | Contains information on Ethernet NTE OSA5411 Card. These are supported on the FSP150CC OSA5411 product. | |
| ethernetNTEOSA5411CardEntry | 1.3.6.1.4.1.2544.1.12.3.1.52.1 | not-accessible | A conceptual row in the ethernetNTEOSA5411CardTable. | |
| PHY ethernetNTEOSA5411CardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.52.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE OSA5411 Card. |
| ADM ethernetNTEOSA5411CardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.52.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE OSA5411 Card. |
| OPE ethernetNTEOSA5411CardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.52.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE OSA5411 Card. |
| SEC ethernetNTEOSA5411CardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.52.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE OSA5411 Card. |
| I32 ethernetNTEOSA5411CardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.52.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE OSA5411 Card. |
| I32 ethernetNTEOSA5411CardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.52.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE OSA5411 Card. |
| T/F ethernetNTEOSA5411CardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.52.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE OSA5411 Card. |
| RES ethernetNTEOSA5411CardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.52.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE OSA5411 card. |
| NUM ethernetNTEOSA5411CardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.52.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| ethernetNTEGE112ProCardTable | 1.3.6.1.4.1.2544.1.12.3.1.53 | not-accessible | Contains information on Ethernet NTE GE112 Pro Cards. These are supported on the FSP150CC GE112 Pro product. | |
| ethernetNTEGE112ProCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.53.1 | not-accessible | A conceptual row in the ethernetNTEGE112ProCardTable. | |
| PHY ethernetNTEGE112ProCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.53.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE GE112 Pro Card. |
| ADM ethernetNTEGE112ProCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.53.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE GE112 Pro Card. |
| OPE ethernetNTEGE112ProCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.53.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE GE112Pro Card. |
| SEC ethernetNTEGE112ProCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.53.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE GE112Pro Card. |
| I32 ethernetNTEGE112ProCardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.53.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE GE112Pro Card. |
| I32 ethernetNTEGE112ProCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.53.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE GE112Pro Card. |
| T/F ethernetNTEGE112ProCardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.53.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE112Pro Card. |
| RES ethernetNTEGE112ProCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.53.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE GE112Pro card. |
| NUM ethernetNTEGE112ProCardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.53.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| NUM ethernetNTEGE112ProCardSwitchPortActionPort | 1.3.6.1.4.1.2544.1.12.3.1.53.1.10 | VariablePointer | read-create | Which port to perform specified switch action on the Ethernet NTE GE112Pro card. |
| SWI ethernetNTEGE112ProCardSwitchPortAction | 1.3.6.1.4.1.2544.1.12.3.1.53.1.11 | SwitchPortAction | read-write | Allows to perform specified action on the Ethernet NTE GE112Pro card. |
| ethernetNTEGE112ProMCardTable | 1.3.6.1.4.1.2544.1.12.3.1.54 | not-accessible | Contains information on Ethernet NTE GE112 Pro Cards. These are supported on the FSP150CC GE112 Pro product. | |
| ethernetNTEGE112ProMCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.54.1 | not-accessible | A conceptual row in the ethernetNTEGE112ProMCardTable. | |
| PHY ethernetNTEGE112ProMCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.54.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE GE112 Pro Card. |
| ADM ethernetNTEGE112ProMCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.54.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE GE112 Pro Card. |
| OPE ethernetNTEGE112ProMCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.54.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE GE112ProM Card. |
| SEC ethernetNTEGE112ProMCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.54.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE GE112ProM Card. |
| I32 ethernetNTEGE112ProMCardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.54.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE GE112ProM Card. |
| I32 ethernetNTEGE112ProMCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.54.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE GE112ProM Card. |
| T/F ethernetNTEGE112ProMCardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.54.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE112ProM Card. |
| RES ethernetNTEGE112ProMCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.54.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE GE112ProM card. |
| NUM ethernetNTEGE112ProMCardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.54.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| NUM ethernetNTEGE112ProMCardSwitchPortActionPort | 1.3.6.1.4.1.2544.1.12.3.1.54.1.10 | VariablePointer | read-create | Which port to perform specified switch action on the Ethernet NTE GE112ProM card. |
| SWI ethernetNTEGE112ProMCardSwitchPortAction | 1.3.6.1.4.1.2544.1.12.3.1.54.1.11 | SwitchPortAction | read-write | Allows to perform specified action on the Ethernet NTE GE112ProM card. |
| ethernetNTEXG210CCardTable | 1.3.6.1.4.1.2544.1.12.3.1.55 | not-accessible | Contains information on Ethernet NTE XG210 Cards. These are supported on the FSP150CC XG210 product. | |
| ethernetNTEXG210CCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.55.1 | not-accessible | A conceptual row in the ethernetNTEXG210CCardTable. | |
| PHY ethernetNTEXG210CCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.55.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE XG210C Card. |
| ADM ethernetNTEXG210CCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.55.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE XG210C Card. |
| OPE ethernetNTEXG210CCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.55.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE XG210C Card. |
| SEC ethernetNTEXG210CCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.55.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE XG210C Card. |
| I32 ethernetNTEXG210CCardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.55.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE XG210C Card. |
| I32 ethernetNTEXG210CCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.55.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE XG210C Card. |
| T/F ethernetNTEXG210CCardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.55.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE XG210C Card. |
| RES ethernetNTEXG210CCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.55.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE XG210 card. |
| NUM ethernetNTEXG210CCardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.55.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| ethernetGE8SCryptoConnectorCardTable | 1.3.6.1.4.1.2544.1.12.3.1.56 | not-accessible | Contains information on Ethernet XG210C Optical Port Expander Cards. These are supported on the XG210C MACSEC board. | |
| ethernetGE8SCryptoConnectorCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.56.1 | not-accessible | A conceptual row in the ethernetGE8SCryptoConnectorCardTable. | |
| PHY ethernetGE8SCryptoConnectorCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.56.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet GE-8SC Connector Card. |
| ADM ethernetGE8SCryptoConnectorCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.56.1.2 | AdminState | read-write | Administrative State of the Ethernet GE-8SC Connector Card. |
| OPE ethernetGE8SCryptoConnectorCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.56.1.3 | OperationalState | read-only | Operational State of the Ethernet GE-8SC Connector Card. |
| SEC ethernetGE8SCryptoConnectorCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.56.1.4 | SecondaryState | read-only | Secondary State of the Ethernet GE-8SC Connector Card. |
| I32 ethernetGE8SCryptoConnectorCardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.56.1.5 | Integer32 | read-only | Voltage of the Ethernet GE-8SC Connector Card. |
| I32 ethernetGE8SCryptoConnectorCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.56.1.6 | Integer32 | read-only | Temperature of the Ethernet GE-8SC Connector Card. |
| RES ethernetGE8SCryptoConnectorCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.56.1.7 | RestartType | read-write | Allows to perform specified action on the Ethernet GE-8SC Connector card. |
| STO ethernetGE8SCryptoConnectorCardStorageType | 1.3.6.1.4.1.2544.1.12.3.1.56.1.8 | StorageType | read-create | The type of storage configured for this entry. |
| ROW ethernetGE8SCryptoConnectorCardRowStatus | 1.3.6.1.4.1.2544.1.12.3.1.56.1.9 | RowStatus | read-create | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ethernetGE8SCryptoConnectorCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ethernetGE8SCryptoConnectorCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ethernetGE8SCryptoConnectorCardRowStatus object may be modified if the associated instance of this object is equal to active(1). |
| ethernetNTEGE114ProCardTable | 1.3.6.1.4.1.2544.1.12.3.1.57 | not-accessible | Contains information on Ethernet NTE GE112 Pro Cards. These are supported on the FSP150CC GE112 Pro product. | |
| ethernetNTEGE114ProCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.57.1 | not-accessible | A conceptual row in the ethernetNTEGE114ProCardTable. | |
| PHY ethernetNTEGE114ProCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.57.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE GE112 Pro Card. |
| ADM ethernetNTEGE114ProCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.57.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE GE112 Pro Card. |
| OPE ethernetNTEGE114ProCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.57.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE GE114Pro Card. |
| SEC ethernetNTEGE114ProCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.57.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE GE114Pro Card. |
| I32 ethernetNTEGE114ProCardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.57.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE GE114Pro Card. |
| I32 ethernetNTEGE114ProCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.57.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE GE114Pro Card. |
| T/F ethernetNTEGE114ProCardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.57.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114Pro Card. |
| RES ethernetNTEGE114ProCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.57.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE GE114Pro card. |
| NUM ethernetNTEGE114ProCardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.57.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| NUM ethernetNTEGE114ProCardSwitchPortActionPort | 1.3.6.1.4.1.2544.1.12.3.1.57.1.10 | VariablePointer | read-create | Which port to perform specified switch action on the Ethernet NTE GE114Pro card. |
| SWI ethernetNTEGE114ProCardSwitchPortAction | 1.3.6.1.4.1.2544.1.12.3.1.57.1.11 | SwitchPortAction | read-write | Allows to perform specified action on the Ethernet NTE GE114Pro card. |
| ethernetNTEGE114ProCCardTable | 1.3.6.1.4.1.2544.1.12.3.1.58 | not-accessible | Contains information on Ethernet NTE GE112 Pro Cards. These are supported on the FSP150CC GE112 Pro product. | |
| ethernetNTEGE114ProCCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.58.1 | not-accessible | A conceptual row in the ethernetNTEGE114ProCCardTable. | |
| PHY ethernetNTEGE114ProCCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.58.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE GE112 Pro Card. |
| ADM ethernetNTEGE114ProCCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.58.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE GE112 Pro Card. |
| OPE ethernetNTEGE114ProCCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.58.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE GE114ProC Card. |
| SEC ethernetNTEGE114ProCCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.58.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE GE114ProC Card. |
| I32 ethernetNTEGE114ProCCardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.58.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE GE114ProC Card. |
| I32 ethernetNTEGE114ProCCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.58.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE GE114ProC Card. |
| T/F ethernetNTEGE114ProCCardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.58.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114ProC Card. |
| RES ethernetNTEGE114ProCCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.58.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE GE114ProC card. |
| NUM ethernetNTEGE114ProCCardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.58.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| NUM ethernetNTEGE114ProCCardSwitchPortActionPort | 1.3.6.1.4.1.2544.1.12.3.1.58.1.10 | VariablePointer | read-create | Which port to perform specified switch action on the Ethernet NTE GE114ProC card. |
| SWI ethernetNTEGE114ProCCardSwitchPortAction | 1.3.6.1.4.1.2544.1.12.3.1.58.1.11 | SwitchPortAction | read-write | Allows to perform specified action on the Ethernet NTE GE114ProC card. |
| ethernetNTEGE114ProSHCardTable | 1.3.6.1.4.1.2544.1.12.3.1.59 | not-accessible | Contains information on Ethernet NTE GE112 Pro Cards. These are supported on the FSP150CC GE112 Pro product. | |
| ethernetNTEGE114ProSHCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.59.1 | not-accessible | A conceptual row in the ethernetNTEGE114ProSHCardTable. | |
| PHY ethernetNTEGE114ProSHCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.59.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE GE112 Pro Card. |
| ADM ethernetNTEGE114ProSHCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.59.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE GE112 Pro Card. |
| OPE ethernetNTEGE114ProSHCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.59.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE GE114ProS Card. |
| SEC ethernetNTEGE114ProSHCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.59.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE GE114ProS Card. |
| I32 ethernetNTEGE114ProSHCardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.59.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE GE114ProS Card. |
| I32 ethernetNTEGE114ProSHCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.59.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE GE114ProS Card. |
| T/F ethernetNTEGE114ProSHCardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.59.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114ProS Card. |
| RES ethernetNTEGE114ProSHCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.59.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE GE114ProS card. |
| NUM ethernetNTEGE114ProSHCardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.59.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| NUM ethernetNTEGE114ProSHCardSwitchPortActionPort | 1.3.6.1.4.1.2544.1.12.3.1.59.1.10 | VariablePointer | read-create | Which port to perform specified switch action on the Ethernet NTE GE114ProSH card. |
| SWI ethernetNTEGE114ProSHCardSwitchPortAction | 1.3.6.1.4.1.2544.1.12.3.1.59.1.11 | SwitchPortAction | read-write | Allows to perform specified action on the Ethernet NTE GE114ProSH card. |
| ethernetNTEGE114ProCSHCardTable | 1.3.6.1.4.1.2544.1.12.3.1.60 | not-accessible | Contains information on Ethernet NTE GE112 Pro Cards. These are supported on the FSP150CC GE112 Pro product. | |
| ethernetNTEGE114ProCSHCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.60.1 | not-accessible | A conceptual row in the ethernetNTEGE114ProCSHCardTable. | |
| PHY ethernetNTEGE114ProCSHCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.60.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE GE112 Pro Card. |
| ADM ethernetNTEGE114ProCSHCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.60.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE GE112 Pro Card. |
| OPE ethernetNTEGE114ProCSHCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.60.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE GE114ProCS Card. |
| SEC ethernetNTEGE114ProCSHCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.60.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE GE114ProCS Card. |
| I32 ethernetNTEGE114ProCSHCardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.60.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE GE114ProCS Card. |
| I32 ethernetNTEGE114ProCSHCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.60.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE GE114ProCS Card. |
| T/F ethernetNTEGE114ProCSHCardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.60.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114ProCS Card. |
| RES ethernetNTEGE114ProCSHCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.60.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE GE114ProCS card. |
| NUM ethernetNTEGE114ProCSHCardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.60.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| NUM ethernetNTEGE114ProCSHCardSwitchPortActionPort | 1.3.6.1.4.1.2544.1.12.3.1.60.1.10 | VariablePointer | read-create | Which port to perform specified switch action on the Ethernet NTE GE114ProCS card. |
| SWI ethernetNTEGE114ProCSHCardSwitchPortAction | 1.3.6.1.4.1.2544.1.12.3.1.60.1.11 | SwitchPortAction | read-write | Allows to perform specified action on the Ethernet NTE GE114ProCS card. |
| ethernetNTEGE114ProHECardTable | 1.3.6.1.4.1.2544.1.12.3.1.61 | not-accessible | Contains information on Ethernet NTE GE112 Pro Cards. These are supported on the FSP150CC GE112 Pro product. | |
| ethernetNTEGE114ProHECardEntry | 1.3.6.1.4.1.2544.1.12.3.1.61.1 | not-accessible | A conceptual row in the ethernetNTEGE114ProHECardTable. | |
| PHY ethernetNTEGE114ProHECardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.61.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE GE112 Pro Card. |
| ADM ethernetNTEGE114ProHECardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.61.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE GE112 Pro Card. |
| OPE ethernetNTEGE114ProHECardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.61.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE GE114ProHE Card. |
| SEC ethernetNTEGE114ProHECardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.61.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE GE114ProHE Card. |
| I32 ethernetNTEGE114ProHECardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.61.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE GE114ProHE Card. |
| I32 ethernetNTEGE114ProHECardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.61.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE GE114ProHE Card. |
| T/F ethernetNTEGE114ProHECardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.61.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114ProHE Card. |
| RES ethernetNTEGE114ProHECardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.61.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE GE114ProHE card. |
| NUM ethernetNTEGE114ProHECardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.61.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| NUM ethernetNTEGE114ProHECardSwitchPortActionPort | 1.3.6.1.4.1.2544.1.12.3.1.61.1.10 | VariablePointer | read-create | Which port to perform specified switch action on the Ethernet NTE GE114ProHE card. |
| SWI ethernetNTEGE114ProHECardSwitchPortAction | 1.3.6.1.4.1.2544.1.12.3.1.61.1.11 | SwitchPortAction | read-write | Allows to perform specified action on the Ethernet NTE GE114ProHE card. |
| ethernetNTEGE112ProHCardTable | 1.3.6.1.4.1.2544.1.12.3.1.62 | not-accessible | Contains information on Ethernet NTE GE112 Pro Cards. These are supported on the FSP150CC GE112 Pro product. | |
| ethernetNTEGE112ProHCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.62.1 | not-accessible | A conceptual row in the ethernetNTEGE112ProHCardTable. | |
| PHY ethernetNTEGE112ProHCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.62.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE GE112 Pro Card. |
| ADM ethernetNTEGE112ProHCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.62.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE GE112 Pro Card. |
| OPE ethernetNTEGE112ProHCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.62.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE GE112ProH Card. |
| SEC ethernetNTEGE112ProHCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.62.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE GE112ProH Card. |
| I32 ethernetNTEGE112ProHCardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.62.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE GE112ProH Card. |
| I32 ethernetNTEGE112ProHCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.62.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE GE112ProH Card. |
| T/F ethernetNTEGE112ProHCardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.62.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE112ProH Card. |
| RES ethernetNTEGE112ProHCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.62.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE GE112ProH card. |
| NUM ethernetNTEGE112ProHCardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.62.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| NUM ethernetNTEGE112ProHCardSwitchPortActionPort | 1.3.6.1.4.1.2544.1.12.3.1.62.1.10 | VariablePointer | read-create | Which port to perform specified switch action on the Ethernet NTE GE112ProH card. |
| SWI ethernetNTEGE112ProHCardSwitchPortAction | 1.3.6.1.4.1.2544.1.12.3.1.62.1.11 | SwitchPortAction | read-write | Allows to perform specified action on the Ethernet NTE GE112ProH card. |
| ethernetNTEOSA5420CardTable | 1.3.6.1.4.1.2544.1.12.3.1.63 | not-accessible | Contains information on Ethernet NTE OSA5420 Card. These are supported on the FSP150CC OSA5420 product. | |
| ethernetNTEOSA5420CardEntry | 1.3.6.1.4.1.2544.1.12.3.1.63.1 | not-accessible | A conceptual row in the ethernetNTEOSA5420CardTable. | |
| PHY ethernetNTEOSA5420CardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.63.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE OSA5420 Card. |
| ADM ethernetNTEOSA5420CardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.63.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE OSA5420 Card. |
| OPE ethernetNTEOSA5420CardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.63.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE OSA5420 Card. |
| SEC ethernetNTEOSA5420CardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.63.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE OSA5420 Card. |
| I32 ethernetNTEOSA5420CardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.63.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE OSA5420 Card. |
| I32 ethernetNTEOSA5420CardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.63.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE OSA5420 Card. |
| T/F ethernetNTEOSA5420CardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.63.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE OSA5420 Card. |
| RES ethernetNTEOSA5420CardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.63.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE OSA5420 card. |
| NUM ethernetNTEOSA5420CardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.63.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| ethernetNTEOSA5421CardTable | 1.3.6.1.4.1.2544.1.12.3.1.64 | not-accessible | Contains information on Ethernet NTE OSA5421 Card. These are supported on the FSP150CC OSA5421 product. | |
| ethernetNTEOSA5421CardEntry | 1.3.6.1.4.1.2544.1.12.3.1.64.1 | not-accessible | A conceptual row in the ethernetNTEOSA5421CardTable. | |
| PHY ethernetNTEOSA5421CardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.64.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE OSA5421 Card. |
| ADM ethernetNTEOSA5421CardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.64.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE OSA5421 Card. |
| OPE ethernetNTEOSA5421CardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.64.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE OSA5421 Card. |
| SEC ethernetNTEOSA5421CardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.64.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE OSA5421 Card. |
| I32 ethernetNTEOSA5421CardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.64.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE OSA5421 Card. |
| I32 ethernetNTEOSA5421CardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.64.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE OSA5421 Card. |
| T/F ethernetNTEOSA5421CardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.64.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE OSA5421 Card. |
| RES ethernetNTEOSA5421CardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.64.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE OSA5421 card. |
| NUM ethernetNTEOSA5421CardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.64.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| ethernetNTEGE114GCardTable | 1.3.6.1.4.1.2544.1.12.3.1.65 | not-accessible | Contains information on Ethernet NTE GE114G Cards. These are supported on the FSP150CC GE114G product. | |
| ethernetNTEGE114GCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.65.1 | not-accessible | A conceptual row in the ethernetNTEGE114GCardTable. | |
| PHY ethernetNTEGE114GCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.65.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE GE114G Card. |
| ADM ethernetNTEGE114GCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.65.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE GE114G Card. |
| OPE ethernetNTEGE114GCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.65.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE GE114G Card. |
| SEC ethernetNTEGE114GCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.65.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE GE114G Card. |
| I32 ethernetNTEGE114GCardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.65.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE GE114G Card. |
| I32 ethernetNTEGE114GCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.65.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE GE114G Card. |
| T/F ethernetNTEGE114GCardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.65.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114G Card. |
| RES ethernetNTEGE114GCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.65.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE GE114G card. |
| NUM ethernetNTEGE114GCardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.65.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| NUM ethernetNTEGE114GCardSwitchPortActionPort | 1.3.6.1.4.1.2544.1.12.3.1.65.1.10 | VariablePointer | read-create | Which port to perform specified switch action on the Ethernet NTE GE114G card. |
| SWI ethernetNTEGE114GCardSwitchPortAction | 1.3.6.1.4.1.2544.1.12.3.1.65.1.11 | SwitchPortAction | read-write | Allows to perform specified action on the Ethernet NTE GE114G card. |
| bits16PortCardTable | 1.3.6.1.4.1.2544.1.12.3.1.66 | not-accessible | A list of entries corresponding to BITS 16 Port Expansion Card Facilities for configuration purposes. | |
| bits16PortCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.66.1 | not-accessible | A conceptual row in the bits16PortCardTable | |
| PHY bits16PortCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.66.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for this card |
| ADM bits16PortCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.66.1.2 | AdminState | read-write | This object represents the Administrative State of the BITS 16 Port Expansion Card. |
| OPE bits16PortCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.66.1.3 | OperationalState | read-only | This object represents the Operational State of the BITS 16 Port Expansion Card. |
| SEC bits16PortCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.66.1.4 | SecondaryState | read-only | This object represents the Secondary State of the BITS 16 Port Expansion Card. |
| ROW bits16PortCardRowStatus | 1.3.6.1.4.1.2544.1.12.3.1.66.1.5 | RowStatus | read-create | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of bits16PortCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with bits16PortCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The bits16PortCardRowStatus object may be modified if the associated instance of this object is equal to active(1). |
| STR bits16PortCardAlias | 1.3.6.1.4.1.2544.1.12.3.1.66.1.6 | DisplayString | read-write | This object allows SNMP management entities to provide an alias to the BITS 16 Port Expansion Card. |
| I32 bits16PortCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.66.1.7 | Integer32 | read-only | Temperature of the BITS 16 Port Expansion Card |
| ethernetNTEGE114ProVmHCardTable | 1.3.6.1.4.1.2544.1.12.3.1.67 | not-accessible | Contains information on Ethernet NTE GE114 Pro VM-H Cards. These are supported on the FSP150CC GE114 Pro VM-H product. | |
| ethernetNTEGE114ProVmHCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.67.1 | not-accessible | A conceptual row in the ethernetNTEGE114ProVmHCardTable. | |
| PHY ethernetNTEGE114ProVmHCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.67.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE GE114 Pro VM-H Card. |
| ADM ethernetNTEGE114ProVmHCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.67.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE GE114 Pro VM-H Card. |
| OPE ethernetNTEGE114ProVmHCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.67.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE GE114ProVmH Card. |
| SEC ethernetNTEGE114ProVmHCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.67.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE GE114ProVmH Card. |
| I32 ethernetNTEGE114ProVmHCardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.67.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE GE114ProVmH Card. |
| I32 ethernetNTEGE114ProVmHCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.67.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE GE114ProVmH Card. |
| T/F ethernetNTEGE114ProVmHCardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.67.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114ProVmH Card. |
| RES ethernetNTEGE114ProVmHCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.67.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE GE114ProVmH card. |
| NUM ethernetNTEGE114ProVmHCardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.67.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| NUM ethernetNTEGE114ProVmHCardSwitchPortActionPort | 1.3.6.1.4.1.2544.1.12.3.1.67.1.10 | VariablePointer | read-create | Which port to perform specified switch action on the Ethernet NTE GE114ProVmH card. |
| SWI ethernetNTEGE114ProVmHCardSwitchPortAction | 1.3.6.1.4.1.2544.1.12.3.1.67.1.11 | SwitchPortAction | read-write | Allows to perform specified action on the Ethernet NTE GE114ProVmH card. |
| ethernetNTEGE114ProVmCHCardTable | 1.3.6.1.4.1.2544.1.12.3.1.68 | not-accessible | Contains information on Ethernet NTE GE114 Pro VM-CH Cards. These are supported on the FSP150CC GE114 Pro VM-CH product. | |
| ethernetNTEGE114ProVmCHCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.68.1 | not-accessible | A conceptual row in the ethernetNTEGE114ProVmCHCardTable. | |
| PHY ethernetNTEGE114ProVmCHCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.68.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE GE114 Pro VM-CH Card. |
| ADM ethernetNTEGE114ProVmCHCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.68.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE GE114 Pro VM-CH Card. |
| OPE ethernetNTEGE114ProVmCHCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.68.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE GE114ProVmCH Card. |
| SEC ethernetNTEGE114ProVmCHCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.68.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE GE114ProVmCH Card. |
| I32 ethernetNTEGE114ProVmCHCardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.68.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE GE114ProVmCH Card. |
| I32 ethernetNTEGE114ProVmCHCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.68.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE GE114ProVmCH Card. |
| T/F ethernetNTEGE114ProVmCHCardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.68.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114ProVmCH Card. |
| RES ethernetNTEGE114ProVmCHCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.68.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE GE114ProVmCH card. |
| NUM ethernetNTEGE114ProVmCHCardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.68.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| NUM ethernetNTEGE114ProVmCHCardSwitchPortActionPort | 1.3.6.1.4.1.2544.1.12.3.1.68.1.10 | VariablePointer | read-create | Which port to perform specified switch action on the Ethernet NTE GE114ProVmCH card. |
| SWI ethernetNTEGE114ProVmCHCardSwitchPortAction | 1.3.6.1.4.1.2544.1.12.3.1.68.1.11 | SwitchPortAction | read-write | Allows to perform specified action on the Ethernet NTE GE114ProVmCH card. |
| ethernetNTEGE114ProVmCSHCardTable | 1.3.6.1.4.1.2544.1.12.3.1.69 | not-accessible | Contains information on Ethernet NTE GE114 Pro VM-CSH Cards. These are supported on the FSP150CC GE114 Pro VM-CSH product. | |
| ethernetNTEGE114ProVmCSHCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.69.1 | not-accessible | A conceptual row in the ethernetNTEGE114ProVmCSHCardTable. | |
| PHY ethernetNTEGE114ProVmCSHCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.69.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE GE114 Pro VM-CSH Card. |
| ADM ethernetNTEGE114ProVmCSHCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.69.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE GE114 Pro VM-CSH Card. |
| OPE ethernetNTEGE114ProVmCSHCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.69.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE GE114ProVmCSH Card. |
| SEC ethernetNTEGE114ProVmCSHCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.69.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE GE114ProVmCSH Card. |
| I32 ethernetNTEGE114ProVmCSHCardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.69.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE GE114ProVmCSH Card. |
| I32 ethernetNTEGE114ProVmCSHCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.69.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE GE114ProVmCSH Card. |
| T/F ethernetNTEGE114ProVmCSHCardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.69.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114ProVmCSH Card. |
| RES ethernetNTEGE114ProVmCSHCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.69.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE GE114ProVmCSH card. |
| NUM ethernetNTEGE114ProVmCSHCardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.69.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| NUM ethernetNTEGE114ProVmCSHCardSwitchPortActionPort | 1.3.6.1.4.1.2544.1.12.3.1.69.1.10 | VariablePointer | read-create | Which port to perform specified switch action on the Ethernet NTE GE114ProVmCSH card. |
| SWI ethernetNTEGE114ProVmCSHCardSwitchPortAction | 1.3.6.1.4.1.2544.1.12.3.1.69.1.11 | SwitchPortAction | read-write | Allows to perform specified action on the Ethernet NTE GE114ProVmCSH card. |
| serverCardTable | 1.3.6.1.4.1.2544.1.12.3.1.70 | not-accessible | Contains information on ServerCard within the Shelf. | |
| serverCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.70.1 | not-accessible | A conceptual row in the serverCardTable. | |
| PHY serverCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.70.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for this Server Card. |
| ADM serverCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.70.1.2 | AdminState | read-write | Administrative State of the Server Card. |
| OPE serverCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.70.1.3 | OperationalState | read-only | Operational State of the Server Card. |
| SEC serverCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.70.1.4 | SecondaryState | read-only | Secondary State of the Server Card. |
| STO serverCardStorageType | 1.3.6.1.4.1.2544.1.12.3.1.70.1.5 | StorageType | read-create | Storage Type of the Server Card. |
| I32 serverCardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.70.1.6 | Integer32 | read-only | Voltage of the Server Card. |
| I32 serverCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.70.1.7 | Integer32 | read-only | Temperature of the Server Card. |
| I32 serverCardUpTime | 1.3.6.1.4.1.2544.1.12.3.1.70.1.8 | Integer32 | read-only | Up time of the Server Card. |
| I32 serverCardVmNumber | 1.3.6.1.4.1.2544.1.12.3.1.70.1.9 | Integer32 | read-only | VM number of the Server Card. |
| I32 serverCardVirtualCpuTotal | 1.3.6.1.4.1.2544.1.12.3.1.70.1.10 | Integer32 | read-only | Total virtual CPU of the Server Card. |
| I32 serverCardVirtualCpuAvailiable | 1.3.6.1.4.1.2544.1.12.3.1.70.1.11 | Integer32 | read-only | Availiable virtual CPU of the Server Card. |
| I32 serverCardMemoryTotal | 1.3.6.1.4.1.2544.1.12.3.1.70.1.12 | Integer32 | read-only | Total memory of the Server Card. |
| I32 serverCardMemoryAvailiable | 1.3.6.1.4.1.2544.1.12.3.1.70.1.13 | Integer32 | read-only | Availiable memory of the Server Card. |
| I32 serverCardStorageTotal | 1.3.6.1.4.1.2544.1.12.3.1.70.1.14 | Integer32 | read-only | Total storage of the Server Card. |
| I32 serverCardStorageAvailiable | 1.3.6.1.4.1.2544.1.12.3.1.70.1.15 | Integer32 | read-only | Availiable storage of the Server Card. |
| STR serverCardHvVersion | 1.3.6.1.4.1.2544.1.12.3.1.70.1.16 | DisplayString | read-only | HV version of the Server Card. |
| STR serverCardHostName | 1.3.6.1.4.1.2544.1.12.3.1.70.1.17 | DisplayString | read-create | Hostname of the Server Card. |
| RES serverCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.70.1.18 | RestartType | read-write | Allows to perform specified action on the VM server card. |
| ROW serverCardRowStatus | 1.3.6.1.4.1.2544.1.12.3.1.70.1.19 | RowStatus | read-create | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of serverCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with serverCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The serverCardRowStatus object may be modified if the associated instance of this object is equal to active(1). |
| T/F serverCardIgnoreWatchdog | 1.3.6.1.4.1.2544.1.12.3.1.70.1.20 | TruthValue | read-write | Ignore keep-alive watchdog. |
| pps16PortCardTable | 1.3.6.1.4.1.2544.1.12.3.1.71 | not-accessible | A list of entries corresponding to BITS 16 Port Expansion Card Facilities for configuration purposes. | |
| pps16PortCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.71.1 | not-accessible | A conceptual row in the pps16PortCardTable | |
| PHY pps16PortCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.71.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for this card |
| ADM pps16PortCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.71.1.2 | AdminState | read-write | This object represents the Administrative State of the BITS 16 Port Expansion Card. |
| OPE pps16PortCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.71.1.3 | OperationalState | read-only | This object represents the Operational State of the BITS 16 Port Expansion Card. |
| SEC pps16PortCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.71.1.4 | SecondaryState | read-only | This object represents the Secondary State of the BITS 16 Port Expansion Card. |
| ROW pps16PortCardRowStatus | 1.3.6.1.4.1.2544.1.12.3.1.71.1.5 | RowStatus | read-create | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of pps16PortCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with pps16PortCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The pps16PortCardRowStatus object may be modified if the associated instance of this object is equal to active(1). |
| STR pps16PortCardAlias | 1.3.6.1.4.1.2544.1.12.3.1.71.1.6 | DisplayString | read-write | This object allows SNMP management entities to provide an alias to the BITS 16 Port Expansion Card. |
| clk16PortCardTable | 1.3.6.1.4.1.2544.1.12.3.1.72 | not-accessible | A list of entries corresponding to BITS 16 Port Expansion Card Facilities for configuration purposes. | |
| clk16PortCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.72.1 | not-accessible | A conceptual row in the clk16PortCardTable | |
| PHY clk16PortCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.72.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for this card |
| ADM clk16PortCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.72.1.2 | AdminState | read-write | This object represents the Administrative State of the BITS 16 Port Expansion Card. |
| OPE clk16PortCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.72.1.3 | OperationalState | read-only | This object represents the Operational State of the BITS 16 Port Expansion Card. |
| SEC clk16PortCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.72.1.4 | SecondaryState | read-only | This object represents the Secondary State of the BITS 16 Port Expansion Card. |
| ROW clk16PortCardRowStatus | 1.3.6.1.4.1.2544.1.12.3.1.72.1.5 | RowStatus | read-create | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of clk16PortCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with clk16PortCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The clk16PortCardRowStatus object may be modified if the associated instance of this object is equal to active(1). |
| STR clk16PortCardAlias | 1.3.6.1.4.1.2544.1.12.3.1.72.1.6 | DisplayString | read-write | This object allows SNMP management entities to provide an alias to the BITS 16 Port Expansion Card. |
| todPps16PortCardTable | 1.3.6.1.4.1.2544.1.12.3.1.73 | not-accessible | A list of entries corresponding to BITS 16 Port Expansion Card Facilities for configuration purposes. | |
| todPps16PortCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.73.1 | not-accessible | A conceptual row in the todPps16PortCardTable | |
| PHY todPps16PortCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.73.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for this card |
| ADM todPps16PortCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.73.1.2 | AdminState | read-write | This object represents the Administrative State of the BITS 16 Port Expansion Card. |
| OPE todPps16PortCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.73.1.3 | OperationalState | read-only | This object represents the Operational State of the BITS 16 Port Expansion Card. |
| SEC todPps16PortCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.73.1.4 | SecondaryState | read-only | This object represents the Secondary State of the BITS 16 Port Expansion Card. |
| ROW todPps16PortCardRowStatus | 1.3.6.1.4.1.2544.1.12.3.1.73.1.5 | RowStatus | read-create | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of todPps16PortCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with todPps16PortCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The todPps16PortCardRowStatus object may be modified if the associated instance of this object is equal to active(1). |
| STR todPps16PortCardAlias | 1.3.6.1.4.1.2544.1.12.3.1.73.1.6 | DisplayString | read-write | This object allows SNMP management entities to provide an alias to the BITS 16 Port Expansion Card. |
| ethernetNTEGE101ProCardTable | 1.3.6.1.4.1.2544.1.12.3.1.74 | not-accessible | Contains information on Ethernet NTE GE101 Pro Cards. These are supported on the FSP150CC GE101 Pro product. | |
| ethernetNTEGE101ProCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.74.1 | not-accessible | A conceptual row in the ethernetNTEGE101ProCardTable. | |
| PHY ethernetNTEGE101ProCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.74.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE GE101 Pro Card. |
| ADM ethernetNTEGE101ProCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.74.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE GE101 Pro Card. |
| OPE ethernetNTEGE101ProCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.74.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE GE101Pro Card. |
| SEC ethernetNTEGE101ProCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.74.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE GE101Pro Card. |
| I32 ethernetNTEGE101ProCardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.74.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE GE101Pro Card. |
| I32 ethernetNTEGE101ProCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.74.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE GE101Pro Card. |
| T/F ethernetNTEGE101ProCardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.74.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE101Pro Card. |
| RES ethernetNTEGE101ProCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.74.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE GE101Pro card. |
| NUM ethernetNTEGE101ProCardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.74.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| NUM ethernetNTEGE101ProCardSwitchPortActionPort | 1.3.6.1.4.1.2544.1.12.3.1.74.1.10 | VariablePointer | read-create | Which port to perform specified switch action on the Ethernet NTE GE101Pro card. |
| SWI ethernetNTEGE101ProCardSwitchPortAction | 1.3.6.1.4.1.2544.1.12.3.1.74.1.11 | SwitchPortAction | read-write | Allows to perform specified action on the Ethernet NTE GE101Pro card. |
| ethernetNTEGO102ProSCardTable | 1.3.6.1.4.1.2544.1.12.3.1.75 | not-accessible | Contains information on Ethernet NTE Pro GO102Pro S Cards. These are supported on the FSP150CC GO102ProS product. | |
| ethernetNTEGO102ProSCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.75.1 | not-accessible | A conceptual row in the ethernetNTEGO102ProSCardTable. | |
| PHY ethernetNTEGO102ProSCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.75.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE GO102ProS Card. |
| ADM ethernetNTEGO102ProSCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.75.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE GO102ProS Card. |
| OPE ethernetNTEGO102ProSCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.75.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE GO102ProS Card. |
| SEC ethernetNTEGO102ProSCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.75.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE GO102ProS Card. |
| I32 ethernetNTEGO102ProSCardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.75.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE GO102ProS Card. |
| I32 ethernetNTEGO102ProSCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.75.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE GO102ProS Card. |
| T/F ethernetNTEGO102ProSCardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.75.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GO102ProS Card. |
| RES ethernetNTEGO102ProSCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.75.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE GO102ProS card. |
| NUM ethernetNTEGO102ProSCardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.75.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| NUM ethernetNTEGO102ProSCardSwitchPortActionPort | 1.3.6.1.4.1.2544.1.12.3.1.75.1.10 | VariablePointer | read-create | Which port to perform specified switch action on the Ethernet NTE GO102ProS card. |
| SWI ethernetNTEGO102ProSCardSwitchPortAction | 1.3.6.1.4.1.2544.1.12.3.1.75.1.11 | SwitchPortAction | read-write | Allows to perform specified action on the Ethernet NTE GO102ProS card. |
| ethernetNTEGO102ProSPCardTable | 1.3.6.1.4.1.2544.1.12.3.1.76 | not-accessible | Contains information on Ethernet NTE Pro Rugged S Cards. These are supported on the FSP150CC GO102ProSP product. | |
| ethernetNTEGO102ProSPCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.76.1 | not-accessible | A conceptual row in the ethernetNTEGO102ProSPCardTable. | |
| PHY ethernetNTEGO102ProSPCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.76.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE GO102ProSP Card. |
| ADM ethernetNTEGO102ProSPCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.76.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE GO102ProSP Card. |
| OPE ethernetNTEGO102ProSPCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.76.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE GO102ProSP Card. |
| SEC ethernetNTEGO102ProSPCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.76.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE GO102ProSP Card. |
| I32 ethernetNTEGO102ProSPCardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.76.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE GO102ProSP Card. |
| I32 ethernetNTEGO102ProSPCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.76.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE GO102ProSP Card. |
| T/F ethernetNTEGO102ProSPCardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.76.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GO102ProSP Card. |
| RES ethernetNTEGO102ProSPCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.76.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE GO102ProSP card. |
| NUM ethernetNTEGO102ProSPCardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.76.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| NUM ethernetNTEGO102ProSPCardSwitchPortActionPort | 1.3.6.1.4.1.2544.1.12.3.1.76.1.10 | VariablePointer | read-create | Which port to perform specified switch action on the Ethernet NTE GO102ProSP card. |
| SWI ethernetNTEGO102ProSPCardSwitchPortAction | 1.3.6.1.4.1.2544.1.12.3.1.76.1.11 | SwitchPortAction | read-write | Allows to perform specified action on the Ethernet NTE GO102ProSP card. |
| ethernetNTECX101Pro30ACardTable | 1.3.6.1.4.1.2544.1.12.3.1.77 | not-accessible | Contains information on Ethernet NTE Pro Rugged S Cards. These are supported on the FSP150CC GE101 Pro product. | |
| ethernetNTECX101Pro30ACardEntry | 1.3.6.1.4.1.2544.1.12.3.1.77.1 | not-accessible | A conceptual row in the ethernetNTECX101Pro30ACardTable. | |
| PHY ethernetNTECX101Pro30ACardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.77.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE CX101PRO 30A Card. |
| ADM ethernetNTECX101Pro30ACardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.77.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE CX101PRO 30A Card. |
| OPE ethernetNTECX101Pro30ACardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.77.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE CX101Pro30A Card. |
| SEC ethernetNTECX101Pro30ACardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.77.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE CX101Pro30A Card. |
| I32 ethernetNTECX101Pro30ACardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.77.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE CX101Pro30A Card. |
| I32 ethernetNTECX101Pro30ACardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.77.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE CX101Pro30A Card. |
| T/F ethernetNTECX101Pro30ACardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.77.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE CX101Pro30A Card. |
| RES ethernetNTECX101Pro30ACardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.77.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE CX101Pro30A card. |
| NUM ethernetNTECX101Pro30ACardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.77.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| NUM ethernetNTECX101Pro30ACardSwitchPortActionPort | 1.3.6.1.4.1.2544.1.12.3.1.77.1.10 | VariablePointer | read-create | Which port to perform specified switch action on the Ethernet NTE CX101Pro30A card. |
| SWI ethernetNTECX101Pro30ACardSwitchPortAction | 1.3.6.1.4.1.2544.1.12.3.1.77.1.11 | SwitchPortAction | read-write | Allows to perform specified action on the Ethernet NTE CX101Pro30A card. |
| ethernetNTECX102Pro30ACardTable | 1.3.6.1.4.1.2544.1.12.3.1.78 | not-accessible | Contains information on Ethernet NTE Pro Rugged S Cards. These are supported on the FSP150CC GE101 Pro product. | |
| ethernetNTECX102Pro30ACardEntry | 1.3.6.1.4.1.2544.1.12.3.1.78.1 | not-accessible | A conceptual row in the ethernetNTECX102Pro30ACardTable. | |
| PHY ethernetNTECX102Pro30ACardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.78.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE GE101 Pro Card. |
| ADM ethernetNTECX102Pro30ACardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.78.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE GE101 Pro Card. |
| OPE ethernetNTECX102Pro30ACardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.78.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE CX102Pro30A Card. |
| SEC ethernetNTECX102Pro30ACardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.78.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE CX102Pro30A Card. |
| I32 ethernetNTECX102Pro30ACardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.78.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE CX102Pro30A Card. |
| I32 ethernetNTECX102Pro30ACardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.78.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE CX102Pro30A Card. |
| T/F ethernetNTECX102Pro30ACardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.78.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE CX102Pro30A Card. |
| RES ethernetNTECX102Pro30ACardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.78.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE CX102Pro30A card. |
| NUM ethernetNTECX102Pro30ACardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.78.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| NUM ethernetNTECX102Pro30ACardSwitchPortActionPort | 1.3.6.1.4.1.2544.1.12.3.1.78.1.10 | VariablePointer | read-create | Which port to perform specified switch action on the Ethernet NTE CX102Pro30A card. |
| SWI ethernetNTECX102Pro30ACardSwitchPortAction | 1.3.6.1.4.1.2544.1.12.3.1.78.1.11 | SwitchPortAction | read-write | Allows to perform specified action on the Ethernet NTE CX102Pro30A card. |
| ge4PortCardTable | 1.3.6.1.4.1.2544.1.12.3.1.79 | not-accessible | A list of entries corresponding to GE 4 Port Expansion Card Facilities for configuration purposes. | |
| ge4PortCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.79.1 | not-accessible | A conceptual row in the ge4PortCardTable | |
| PHY ge4PortCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.79.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for this card |
| ADM ge4PortCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.79.1.2 | AdminState | read-write | This object represents the Administrative State of the GE 4 Port Expansion Card. |
| OPE ge4PortCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.79.1.3 | OperationalState | read-only | This object represents the Operational State of the GE 4 Port Expansion Card. |
| SEC ge4PortCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.79.1.4 | SecondaryState | read-only | This object represents the Secondary State of the GE 4 Port Expansion Card. |
| ROW ge4PortCardRowStatus | 1.3.6.1.4.1.2544.1.12.3.1.79.1.5 | RowStatus | read-create | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ge4PortCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ge4PortCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ge4PortCardRowStatus object may be modified if the associated instance of this object is equal to active(1). |
| STR ge4PortCardAlias | 1.3.6.1.4.1.2544.1.12.3.1.79.1.6 | DisplayString | read-write | This object allows SNMP management entities to provide an alias to the GE 4 Port Expansion Card. |
| I32 ge4PortCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.79.1.7 | Integer32 | read-only | Temperature of the GE 4 Port Expansion Card. |
| ethernetNTEXG116PROCardTable | 1.3.6.1.4.1.2544.1.12.3.1.80 | not-accessible | Contains information on Ethernet NTE XG116PRO Card. These are supported on the FSP150CC XG116PRO product. | |
| ethernetNTEXG116PROCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.80.1 | not-accessible | A conceptual row in the ethernetNTEXG116PROCardTable. | |
| PHY ethernetNTEXG116PROCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.80.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE XG116PRO Card. |
| ADM ethernetNTEXG116PROCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.80.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE XG116PRO Card. |
| OPE ethernetNTEXG116PROCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.80.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE XG116PRO Card. |
| SEC ethernetNTEXG116PROCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.80.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE XG116PRO Card. |
| I32 ethernetNTEXG116PROCardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.80.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE XG116PRO Card. |
| I32 ethernetNTEXG116PROCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.80.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE XG116PRO Card. |
| T/F ethernetNTEXG116PROCardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.80.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE XG116PRO Card. |
| RES ethernetNTEXG116PROCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.80.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE XG116PRO card. |
| NUM ethernetNTEXG116PROCardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.80.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| ethernetNTEXG120PROCardTable | 1.3.6.1.4.1.2544.1.12.3.1.81 | not-accessible | Contains information on Ethernet NTE XG120PRO Card. These are supported on the FSP150CC XG120PRO product. | |
| ethernetNTEXG120PROCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.81.1 | not-accessible | A conceptual row in the ethernetNTEXG120PROCardTable. | |
| PHY ethernetNTEXG120PROCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.81.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE XG120PRO Card. |
| ADM ethernetNTEXG120PROCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.81.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE XG120PRO Card. |
| OPE ethernetNTEXG120PROCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.81.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE XG120PRO Card. |
| SEC ethernetNTEXG120PROCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.81.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE XG120PRO Card. |
| I32 ethernetNTEXG120PROCardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.81.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE XG120PRO Card. |
| I32 ethernetNTEXG120PROCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.81.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE XG120PRO Card. |
| T/F ethernetNTEXG120PROCardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.81.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE XG120PRO Card. |
| RES ethernetNTEXG120PROCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.81.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE XG120PRO card. |
| NUM ethernetNTEXG120PROCardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.81.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| ethernetNTEGE112ProVmCardTable | 1.3.6.1.4.1.2544.1.12.3.1.82 | not-accessible | Contains information on Ethernet NTE GE112 Pro VM Cards. These are supported on the FSP150CC GE112 Pro VM product. | |
| ethernetNTEGE112ProVmCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.82.1 | not-accessible | A conceptual row in the ethernetNTEGE112ProVmCardTable. | |
| PHY ethernetNTEGE112ProVmCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.82.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE GE114 Pro VM-CSH Card. |
| ADM ethernetNTEGE112ProVmCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.82.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE GE114 Pro VM-CSH Card. |
| OPE ethernetNTEGE112ProVmCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.82.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE GE112ProVm Card. |
| SEC ethernetNTEGE112ProVmCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.82.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE GE112ProVm Card. |
| I32 ethernetNTEGE112ProVmCardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.82.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE GE112ProVm Card. |
| I32 ethernetNTEGE112ProVmCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.82.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE GE112ProVm Card. |
| T/F ethernetNTEGE112ProVmCardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.82.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE112ProVm Card. |
| RES ethernetNTEGE112ProVmCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.82.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE GE112ProVm card. |
| NUM ethernetNTEGE112ProVmCardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.82.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| NUM ethernetNTEGE112ProVmCardSwitchPortActionPort | 1.3.6.1.4.1.2544.1.12.3.1.82.1.10 | VariablePointer | read-create | Which port to perform specified switch action on the Ethernet NTE GE112ProVm card. |
| SWI ethernetNTEGE112ProVmCardSwitchPortAction | 1.3.6.1.4.1.2544.1.12.3.1.82.1.11 | SwitchPortAction | read-write | Allows to perform specified action on the Ethernet NTE GE112ProVm card. |
| ethernetNTEOSA5401CardTable | 1.3.6.1.4.1.2544.1.12.3.1.83 | not-accessible | Contains information on Ethernet NTE OSA5401 Card. These are supported on the OSA5401 product. | |
| ethernetNTEOSA5401CardEntry | 1.3.6.1.4.1.2544.1.12.3.1.83.1 | not-accessible | A conceptual row in the ethernetNTEOSA5401CardTable. | |
| PHY ethernetNTEOSA5401CardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.83.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE OSA5401 Card. |
| ADM ethernetNTEOSA5401CardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.83.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE OSA5401 Card. |
| OPE ethernetNTEOSA5401CardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.83.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE OSA5401 Card. |
| RES ethernetNTEOSA5401CardTableRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.83.1.4 | RestartType | read-write | Allows to perform restart action on NTE OSA5401 Card. |
| ethernetNTEOSA5405CardTable | 1.3.6.1.4.1.2544.1.12.3.1.84 | not-accessible | Contains information on Ethernet NTE OSA5405 Card. These are supported on the OSA5405 product. | |
| ethernetNTEOSA5405CardEntry | 1.3.6.1.4.1.2544.1.12.3.1.84.1 | not-accessible | A conceptual row in the ethernetNTEOSA5405CardTable. | |
| PHY ethernetNTEOSA5405CardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.84.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE OSA5405 Card. |
| ADM ethernetNTEOSA5405CardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.84.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE OSA5405 Card. |
| OPE ethernetNTEOSA5405CardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.84.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE OSA5405 Card. |
| I32 ethernetNTEOSA5405CardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.84.1.4 | Integer32 | read-only | Voltage of the Ethernet NTE OSA5405 Card in mV units. |
| I32 ethernetNTEOSA5405CardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.84.1.5 | Integer32 | read-only | Temperature of the Ethernet NTE OSA5405 Card. |
| RES ethernetNTEOSA5405CardTableRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.84.1.6 | RestartType | read-write | Allows to perform restart action on NTE OSA5405 Card. |
| ethernetCSMCardTable | 1.3.6.1.4.1.2544.1.12.3.1.85 | not-accessible | Contains information on Ethernet CSM Card. These are supported on the OSA5430 and OSA5440 product. | |
| ethernetCSMCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.85.1 | not-accessible | A conceptual row in the ethernetCSMCardTable. | |
| PHY ethernetCSMCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.85.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE CSM Card. |
| ADM ethernetCSMCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.85.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE CSM Card. |
| OPE ethernetCSMCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.85.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE CSM Card. |
| SEC ethernetCSMCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.85.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE CSM Card. |
| I32 ethernetCSMCardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.85.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE CSM Card. |
| I32 ethernetCSMCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.85.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE CSM Card. |
| T/F ethernetCSMCardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.85.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE CSM Card. |
| RES ethernetCSMCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.85.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE CSM card. |
| NUM ethernetCSMCardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.85.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| STR ethernetCSMCardOscillatorType | 1.3.6.1.4.1.2544.1.12.3.1.85.1.10 | DisplayString | read-only | The mOscillatorType. |
| auxPortCardTable | 1.3.6.1.4.1.2544.1.12.3.1.87 | not-accessible | A list of entries corresponding to Auxiliary Port Expansion Card Facilities for configuration purposes. | |
| auxPortCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.87.1 | not-accessible | A conceptual row in the auxPortCardTable | |
| PHY auxPortCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.87.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for this card |
| ADM auxPortCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.87.1.2 | AdminState | read-write | This object represents the Administrative State of the Auxiliary Port Expansion Card. |
| OPE auxPortCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.87.1.3 | OperationalState | read-only | This object represents the Operational State of the Auxiliary Port Expansion Card. |
| SEC auxPortCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.87.1.4 | SecondaryState | read-only | This object represents the Secondary State of the Auxiliary Port Expansion Card. |
| ROW auxPortCardRowStatus | 1.3.6.1.4.1.2544.1.12.3.1.87.1.5 | RowStatus | read-create | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of auxPortCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with auxPortCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The auxPortCardRowStatus object may be modified if the associated instance of this object is equal to active(1). |
| STR auxPortCardAlias | 1.3.6.1.4.1.2544.1.12.3.1.87.1.6 | DisplayString | read-write | This object allows SNMP management entities to provide an alias to the Auxiliary Port Expansion Card. |
| I32 auxPortCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.87.1.7 | Integer32 | read-only | Temperature of the Auxiliary Port Expansion Card. |
| ethernetNTEGE102ProHCardTable | 1.3.6.1.4.1.2544.1.12.3.1.88 | not-accessible | Contains information on Ethernet NTE GE102 Pro H Cards. These are supported on the FSP150CC GE102 Pro H product. | |
| ethernetNTEGE102ProHCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.88.1 | not-accessible | A conceptual row in the ethernetNTEGE102ProHCardTable. | |
| PHY ethernetNTEGE102ProHCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.88.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE GE102 Pro H Card. |
| ADM ethernetNTEGE102ProHCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.88.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE GE102 Pro H Card. |
| OPE ethernetNTEGE102ProHCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.88.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE GE102 Pro H Card. |
| SEC ethernetNTEGE102ProHCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.88.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE GE102 Pro H Card. |
| I32 ethernetNTEGE102ProHCardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.88.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE GE102 Pro H Card. |
| I32 ethernetNTEGE102ProHCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.88.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE GE102 Pro H Card. |
| T/F ethernetNTEGE102ProHCardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.88.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE102 Pro H Card. |
| RES ethernetNTEGE102ProHCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.88.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE GE102 Pro H card. |
| NUM ethernetNTEGE102ProHCardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.88.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| NUM ethernetNTEGE102ProHCardSwitchPortActionPort | 1.3.6.1.4.1.2544.1.12.3.1.88.1.10 | VariablePointer | read-create | Which port to perform specified switch action on the Ethernet NTE GE102 Pro H card. |
| SWI ethernetNTEGE102ProHCardSwitchPortAction | 1.3.6.1.4.1.2544.1.12.3.1.88.1.11 | SwitchPortAction | read-write | Allows to perform specified action on the Ethernet NTE GE102 Pro H card. |
| OPE ethernetNTEGE102ProHCardPSU1State | 1.3.6.1.4.1.2544.1.12.3.1.88.1.12 | OperationalState | read-only | Operational State of Power Supply Unit 1 on Ethernet NTE GE102Pro H card. |
| OPE ethernetNTEGE102ProHCardPSU2State | 1.3.6.1.4.1.2544.1.12.3.1.88.1.13 | OperationalState | read-only | Operational State of Power Supply Unit 2 on Ethernet NTE GE102Pro H card. |
| OPE ethernetNTEGE102ProHCardFAN1State | 1.3.6.1.4.1.2544.1.12.3.1.88.1.14 | OperationalState | read-only | Operational State of FAN 1 on Ethernet NTE GE102Pro H card. |
| OPE ethernetNTEGE102ProHCardFAN2State | 1.3.6.1.4.1.2544.1.12.3.1.88.1.15 | OperationalState | read-only | Operational State of FAN 2 on Ethernet NTE GE102Pro H card. |
| PSU ethernetNTEGE102ProHCardPsuType | 1.3.6.1.4.1.2544.1.12.3.1.88.1.16 | PsuType | read-only | PSU Type on Ethernet NTE GE102Pro H card. |
| ethernetNTEGE102ProEFMHCardTable | 1.3.6.1.4.1.2544.1.12.3.1.89 | not-accessible | Contains information on Ethernet NTE GE102 Pro EFMH Cards. These are supported on the FSP150CC GE102 Pro EFMH product. | |
| ethernetNTEGE102ProEFMHCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.89.1 | not-accessible | A conceptual row in the ethernetNTEGE102ProEFMHCardTable. | |
| PHY ethernetNTEGE102ProEFMHCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.89.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE GE102 Pro EFMH Card. |
| ADM ethernetNTEGE102ProEFMHCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.89.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE GE102 Pro EFMH Card. |
| OPE ethernetNTEGE102ProEFMHCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.89.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE GE102 Pro EFMH Card. |
| SEC ethernetNTEGE102ProEFMHCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.89.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE GE102 Pro EFMHCard. |
| I32 ethernetNTEGE102ProEFMHCardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.89.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE GE102 Pro EFMH Card. |
| I32 ethernetNTEGE102ProEFMHCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.89.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE GE102 Pro EFMH Card. |
| RES ethernetNTEGE102ProEFMHCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.89.1.7 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE GE102Pro EFMH card. |
| OPE ethernetNTEGE102ProEFMHCardPSU1State | 1.3.6.1.4.1.2544.1.12.3.1.89.1.8 | OperationalState | read-only | Operational State of Power Supply Unit 1 on Ethernet NTE GE102Pro EFMH card. |
| OPE ethernetNTEGE102ProEFMHCardPSU2State | 1.3.6.1.4.1.2544.1.12.3.1.89.1.9 | OperationalState | read-only | Operational State of Power Supply Unit 2 on Ethernet NTE GE102Pro EFMH card. |
| OPE ethernetNTEGE102ProEFMHCardFAN1State | 1.3.6.1.4.1.2544.1.12.3.1.89.1.10 | OperationalState | read-only | Operational State of FAN 1 on Ethernet NTE GE102Pro EFMH card. |
| OPE ethernetNTEGE102ProEFMHCardFAN2State | 1.3.6.1.4.1.2544.1.12.3.1.89.1.11 | OperationalState | read-only | Operational State of FAN 2 on Ethernet NTE GE102Pro EFMH card. |
| PSU ethernetNTEGE102ProEFMHCardPsuType | 1.3.6.1.4.1.2544.1.12.3.1.89.1.12 | PsuType | read-only | PSU Type on Ethernet NTE GE102Pro EFMH card. |
| CMC ethernetNTEGE102ProEFMHCardLLFMode | 1.3.6.1.4.1.2544.1.12.3.1.89.1.13 | CmCPMRLinkLossFwdMode | read-only | Current Link Loss Forwarding Mode on CPMR. |
| CMC ethernetNTEGE102ProEFMHCardLLFModeAction | 1.3.6.1.4.1.2544.1.12.3.1.89.1.14 | CmCPMRLinkLossFwdMode | read-write | Operation to set the appropriate mode on CPMR. |
| ethernetOsa3350MgntCardTable | 1.3.6.1.4.1.2544.1.12.3.1.90 | not-accessible | Contains information on Ethernet Osa3350 Mgnt Cards. | |
| ethernetOsa3350MgntCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.90.1 | not-accessible | A conceptual row in the ethernetOsa3350MgntCardTable. | |
| PHY ethernetOsa3350MgntCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.90.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet Osa3350 Mgnt Card. |
| ADM ethernetOsa3350MgntCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.90.1.2 | AdminState | read-write | Administrative State of the Ethernet Osa3350 Mgnt Card. |
| OPE ethernetOsa3350MgntCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.90.1.3 | OperationalState | read-only | Operational State of the Ethernet Osa3350 Mgnt Card. |
| SEC ethernetOsa3350MgntCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.90.1.4 | SecondaryState | read-only | Secondary State of the Ethernet Osa3350 Mgnt Card. |
| RES ethernetOsa3350MgntCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.90.1.5 | RestartType | read-write | Allows to perform specified restart action on the Ethernet Osa3350 Mgnt card. |
| RES ethernetOsa3350MgntCardResyncAction | 1.3.6.1.4.1.2544.1.12.3.1.90.1.6 | ResyncType | read-write | Allows to perform specified resync action on the Ethernet Osa3350 Mgnt card. |
| ethernetNTEXG116PROHCardTable | 1.3.6.1.4.1.2544.1.12.3.1.91 | not-accessible | Contains information on Ethernet NTE XG116PRO (H) Card. These are supported on the FSP150CC XG116PRO (H) product. | |
| ethernetNTEXG116PROHCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.91.1 | not-accessible | A conceptual row in the ethernetNTEXG116PROHCardTable. | |
| PHY ethernetNTEXG116PROHCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.91.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE XG116PRO (H) Card. |
| ADM ethernetNTEXG116PROHCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.91.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE XG116PRO (H) Card. |
| OPE ethernetNTEXG116PROHCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.91.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE XG116PRO (H) Card. |
| SEC ethernetNTEXG116PROHCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.91.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE XG116PRO (H) Card. |
| I32 ethernetNTEXG116PROHCardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.91.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE XG116PRO (H) Card. |
| I32 ethernetNTEXG116PROHCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.91.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE XG116PRO (H) Card. |
| T/F ethernetNTEXG116PROHCardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.91.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE XG116PRO (H) Card. |
| RES ethernetNTEXG116PROHCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.91.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE XG116PRO (H) card. |
| NUM ethernetNTEXG116PROHCardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.91.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| ethernetNTEGO102ProSMCardTable | 1.3.6.1.4.1.2544.1.12.3.1.92 | not-accessible | Contains information on Ethernet NTE Pro GO102Pro-S Mini Cards. These are supported on the FSP150CC GO102Pro-S Mini product. | |
| ethernetNTEGO102ProSMCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.92.1 | not-accessible | A conceptual row in the ethernetNTEGO102ProSMCardTable. | |
| PHY ethernetNTEGO102ProSMCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.92.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE GO102Pro-SM Card. |
| ADM ethernetNTEGO102ProSMCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.92.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE GO102Pro-SM Card. |
| OPE ethernetNTEGO102ProSMCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.92.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE GO102Pro-SM Card. |
| SEC ethernetNTEGO102ProSMCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.92.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE GO102Pro-SM Card. |
| I32 ethernetNTEGO102ProSMCardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.92.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE GO102Pro-SM Card. |
| I32 ethernetNTEGO102ProSMCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.92.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE GO102Pro-SM Card. |
| T/F ethernetNTEGO102ProSMCardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.92.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GO102Pro-SM Card. |
| RES ethernetNTEGO102ProSMCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.92.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE GO102Pro-SM card. |
| NUM ethernetNTEGO102ProSMCardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.92.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| NUM ethernetNTEGO102ProSMCardSwitchPortActionPort | 1.3.6.1.4.1.2544.1.12.3.1.92.1.10 | VariablePointer | read-create | Which port to perform specified switch action on the Ethernet NTE GO102Pro-SM card. |
| SWI ethernetNTEGO102ProSMCardSwitchPortAction | 1.3.6.1.4.1.2544.1.12.3.1.92.1.11 | SwitchPortAction | read-write | Allows to perform specified action on the Ethernet NTE GO102Pro-SM card. |
| ethernetNTEXG118PROSHCardTable | 1.3.6.1.4.1.2544.1.12.3.1.93 | not-accessible | Contains information on Ethernet NTE XG118PRO (SH) Card. These are supported on the FSP150CC XG118PRO (SH) product. | |
| ethernetNTEXG118PROSHCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.93.1 | not-accessible | A conceptual row in the ethernetNTEXG118PROSHCardTable. | |
| PHY ethernetNTEXG118PROSHCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.93.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE XG118PRO (SH) Card. |
| ADM ethernetNTEXG118PROSHCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.93.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE XG118PRO (SH) Card. |
| OPE ethernetNTEXG118PROSHCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.93.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE XG118PRO (SH) Card. |
| SEC ethernetNTEXG118PROSHCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.93.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE XG118PRO (SH) Card. |
| I32 ethernetNTEXG118PROSHCardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.93.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE XG118PRO (SH) Card. |
| I32 ethernetNTEXG118PROSHCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.93.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE XG118PRO (SH) Card. |
| T/F ethernetNTEXG118PROSHCardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.93.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE XG118PRO (SH) Card. |
| RES ethernetNTEXG118PROSHCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.93.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE XG118PRO (SH) card. |
| NUM ethernetNTEXG118PROSHCardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.93.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| ethernetNTEXG118PROACSHCardTable | 1.3.6.1.4.1.2544.1.12.3.1.94 | not-accessible | Contains information on Ethernet NTE XG118PROAC (SH) Card. These are supported on the FSP150CC XG118PROAC (SH) product. | |
| ethernetNTEXG118PROACSHCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.94.1 | not-accessible | A conceptual row in the ethernetNTEXG118PROACSHCardTable. | |
| PHY ethernetNTEXG118PROACSHCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.94.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE XG118PROAC (SH) Card. |
| ADM ethernetNTEXG118PROACSHCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.94.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE XG118PROAC (SH) Card. |
| OPE ethernetNTEXG118PROACSHCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.94.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE XG118PROAC (SH) Card. |
| SEC ethernetNTEXG118PROACSHCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.94.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE XG118PROAC (SH) Card. |
| I32 ethernetNTEXG118PROACSHCardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.94.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE XG118PROAC (SH) Card. |
| I32 ethernetNTEXG118PROACSHCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.94.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE XG118PROAC (SH) Card. |
| T/F ethernetNTEXG118PROACSHCardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.94.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE XG118PROAC (SH) Card. |
| RES ethernetNTEXG118PROACSHCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.94.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE XG118PROAC (SH) card. |
| NUM ethernetNTEXG118PROACSHCardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.94.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| ethernetNTEGE114ProVmSHCardTable | 1.3.6.1.4.1.2544.1.12.3.1.95 | not-accessible | Contains information on Ethernet NTE GE114 Pro VM-CH Cards. These are supported on the FSP150CC GE114 Pro VM-CH product. | |
| ethernetNTEGE114ProVmSHCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.95.1 | not-accessible | A conceptual row in the ethernetNTEGE114ProVmSHCardTable. | |
| PHY ethernetNTEGE114ProVmSHCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.95.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE GE114 Pro VM-CH Card. |
| ADM ethernetNTEGE114ProVmSHCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.95.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE GE114 Pro VM-CH Card. |
| OPE ethernetNTEGE114ProVmSHCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.95.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE GE114ProVmSH Card. |
| SEC ethernetNTEGE114ProVmSHCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.95.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE GE114ProVmSH Card. |
| I32 ethernetNTEGE114ProVmSHCardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.95.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE GE114ProVmSH Card. |
| I32 ethernetNTEGE114ProVmSHCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.95.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE GE114ProVmSH Card. |
| T/F ethernetNTEGE114ProVmSHCardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.95.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114ProVmSH Card. |
| RES ethernetNTEGE114ProVmSHCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.95.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE GE114ProVmSH card. |
| NUM ethernetNTEGE114ProVmSHCardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.95.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| NUM ethernetNTEGE114ProVmSHCardSwitchPortActionPort | 1.3.6.1.4.1.2544.1.12.3.1.95.1.10 | VariablePointer | read-create | Which port to perform specified switch action on the Ethernet NTE GE114ProVmSH card. |
| SWI ethernetNTEGE114ProVmSHCardSwitchPortAction | 1.3.6.1.4.1.2544.1.12.3.1.95.1.11 | SwitchPortAction | read-write | Allows to perform specified action on the Ethernet NTE GE114ProVmSH card. |
| ethernetNTEGE104CardTable | 1.3.6.1.4.1.2544.1.12.3.1.96 | not-accessible | Contains information on Ethernet NTE GE104 Cards. These are supported on the FSP150CC GE104 product. | |
| ethernetNTEGE104CardEntry | 1.3.6.1.4.1.2544.1.12.3.1.96.1 | not-accessible | A conceptual row in the ethernetNTEGE104CardTable. | |
| PHY ethernetNTEGE104CardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.96.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE GE104 Card. |
| ADM ethernetNTEGE104CardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.96.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE GE104 Card. |
| OPE ethernetNTEGE104CardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.96.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE GE104 Card. |
| SEC ethernetNTEGE104CardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.96.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE GE104 Card. |
| I32 ethernetNTEGE104CardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.96.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE GE102 Card. |
| I32 ethernetNTEGE104CardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.96.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE GE104 Card. |
| T/F ethernetNTEGE104CardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.96.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE104 Card. |
| RES ethernetNTEGE104CardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.96.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE GE104 card. |
| NUM ethernetNTEGE104CardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.96.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| NUM ethernetNTEGE104CardSwitchPortActionPort | 1.3.6.1.4.1.2544.1.12.3.1.96.1.10 | VariablePointer | read-create | Which port to perform specified switch action on the Ethernet NTE GE104 card. |
| SWI ethernetNTEGE104CardSwitchPortAction | 1.3.6.1.4.1.2544.1.12.3.1.96.1.11 | SwitchPortAction | read-write | Allows to perform specified action on the Ethernet NTE GE104 card. |
| ethernetNTEXG120PROSHCardTable | 1.3.6.1.4.1.2544.1.12.3.1.97 | not-accessible | Contains information on Ethernet NTE XG120PROSH Card. These are supported on the FSP150CC XG120PROSH product. | |
| ethernetNTEXG120PROSHCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.97.1 | not-accessible | A conceptual row in the ethernetNTEXG120PROSHCardTable. | |
| PHY ethernetNTEXG120PROSHCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.97.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for the Ethernet NTE XG120PROSH Card. |
| ADM ethernetNTEXG120PROSHCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.97.1.2 | AdminState | read-write | Administrative State of the Ethernet NTE XG120PROSH Card. |
| OPE ethernetNTEXG120PROSHCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.97.1.3 | OperationalState | read-only | Operational State of the Ethernet NTE XG120PROSH Card. |
| SEC ethernetNTEXG120PROSHCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.97.1.4 | SecondaryState | read-only | Secondary State of the Ethernet NTE XG120PROSH Card. |
| I32 ethernetNTEXG120PROSHCardVoltage | 1.3.6.1.4.1.2544.1.12.3.1.97.1.5 | Integer32 | read-only | Voltage of the Ethernet NTE XG120PROSH Card. |
| I32 ethernetNTEXG120PROSHCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.97.1.6 | Integer32 | read-only | Temperature of the Ethernet NTE XG120PROSH Card. |
| T/F ethernetNTEXG120PROSHCardSnmpDyingGaspEnabled | 1.3.6.1.4.1.2544.1.12.3.1.97.1.7 | TruthValue | read-write | Whether or not SNMP dying gasp is enabled on the Ethernet NTE XG120PROSH Card. |
| RES ethernetNTEXG120PROSHCardRestartAction | 1.3.6.1.4.1.2544.1.12.3.1.97.1.8 | RestartType | read-write | Allows to perform specified action on the Ethernet NTE XG120PROSH card. |
| NUM ethernetNTEXG120PROSHCardFineGrainedPmInterval | 1.3.6.1.4.1.2544.1.12.3.1.97.1.9 | CmPmIntervalType | read-write | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15min. interval-1day and rollover are not considered fine-grained intervals. |
| mbGnssCardTable | 1.3.6.1.4.1.2544.1.12.3.1.98 | not-accessible | A list of entries corresponding to MB GNSS Expansion Card Facilities for configuration purposes. | |
| mbGnssCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.98.1 | not-accessible | A conceptual row in the mbGnssCardTable | |
| PHY mbGnssCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.98.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for this card |
| ADM mbGnssCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.98.1.2 | AdminState | read-write | This object represents the Administrative State of the BITS 16 Port Expansion Card. |
| OPE mbGnssCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.98.1.3 | OperationalState | read-only | This object represents the Operational State of the BITS 16 Port Expansion Card. |
| SEC mbGnssCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.98.1.4 | SecondaryState | read-only | This object represents the Secondary State of the BITS 16 Port Expansion Card. |
| ROW mbGnssCardRowStatus | 1.3.6.1.4.1.2544.1.12.3.1.98.1.5 | RowStatus | read-create | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of mbGnssCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with mbGnssCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The mbGnssCardRowStatus object may be modified if the associated instance of this object is equal to active(1). |
| STR mbGnssCardAlias | 1.3.6.1.4.1.2544.1.12.3.1.98.1.6 | DisplayString | read-write | This object allows SNMP management entities to provide an alias to the MB GNSS Expansion Card. |
| f3IrigCardTable | 1.3.6.1.4.1.2544.1.12.3.1.99 | not-accessible | A list of entries corresponding to IRIG Card Facilities for configuration purposes. | |
| f3IrigCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.99.1 | not-accessible | A conceptual row in the f3IrigCardTable | |
| PHY f3IrigCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.99.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for this card |
| STR f3IrigCardAlias | 1.3.6.1.4.1.2544.1.12.3.1.99.1.2 | DisplayString | read-write | This object allows SNMP management entities to provide an alias to the GE 4 Port Expansion Card. |
| ADM f3IrigCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.99.1.3 | AdminState | read-write | This object represents the Administrative State of the GE 4 Port Expansion Card. |
| OPE f3IrigCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.99.1.4 | OperationalState | read-only | This object represents the Operational State of the GE 4 Port Expansion Card. |
| SEC f3IrigCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.99.1.5 | SecondaryState | read-only | This object represents the Secondary State of the GE 4 Port Expansion Card. |
| I32 f3IrigCardTemperature | 1.3.6.1.4.1.2544.1.12.3.1.99.1.6 | Integer32 | read-only | Temperature of the GE 4 Port Expansion Card. |
| STO f3IrigCardStorageType | 1.3.6.1.4.1.2544.1.12.3.1.99.1.7 | StorageType | read-create | Storage Type of the IRIG Card. |
| ROW f3IrigCardRowStatus | 1.3.6.1.4.1.2544.1.12.3.1.99.1.8 | RowStatus | read-create | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3IrigCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3IrigCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3IrigCardRowStatus object may be modified if the associated instance of this object is equal to active(1). |
| compositeClockCardTable | 1.3.6.1.4.1.2544.1.12.3.1.100 | not-accessible | A list of entries corresponding to Composite Clock Expansion Card Facilities for configuration purposes. | |
| compositeClockCardEntry | 1.3.6.1.4.1.2544.1.12.3.1.100.1 | not-accessible | A conceptual row in the compositeClockCardTable | |
| PHY compositeClockCardEntityIndex | 1.3.6.1.4.1.2544.1.12.3.1.100.1.1 | PhysicalIndex | read-only | Entity Index from ENTITY-MIB for this card |
| ADM compositeClockCardAdminState | 1.3.6.1.4.1.2544.1.12.3.1.100.1.2 | AdminState | read-write | This object represents the Administrative State of the BITS 16 Port Expansion Card. |
| OPE compositeClockCardOperationalState | 1.3.6.1.4.1.2544.1.12.3.1.100.1.3 | OperationalState | read-only | This object represents the Operational State of the BITS 16 Port Expansion Card. |
| SEC compositeClockCardSecondaryState | 1.3.6.1.4.1.2544.1.12.3.1.100.1.4 | SecondaryState | read-only | This object represents the Secondary State of the BITS 16 Port Expansion Card. |
| ROW compositeClockCardRowStatus | 1.3.6.1.4.1.2544.1.12.3.1.100.1.5 | RowStatus | read-create | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of compositeClockCardRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with compositeClockCardRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The compositeClockCardRowStatus object may be modified if the associated instance of this object is equal to active(1). |
| STR compositeClockCardAlias | 1.3.6.1.4.1.2544.1.12.3.1.100.1.6 | DisplayString | read-write | This object allows SNMP management entities to provide an alias to the COMPOSITE CLOCK Expansion Card. |
| f3StorageDeviceTable | 1.3.6.1.4.1.2544.1.12.3.1.101 | not-accessible | Contains information on storage devices within the server card. | |
| f3StorageDeviceEntry | 1.3.6.1.4.1.2544.1.12.3.1.101.1 | not-accessible | A conceptual row in the f3StorageDeviceTable. | |
| T/F f3StorageDeviceInternalSsdHealth | 1.3.6.1.4.1.2544.1.12.3.1.101.1.1 | TruthValue | read-only | Indicates health of internal SSD on server card. |
| STO f3StorageDeviceExternalSsdStatus | 1.3.6.1.4.1.2544.1.12.3.1.101.1.2 | StorageStatus | read-only | Indicates status of external SSD on server card. |
| I32 f3StorageDeviceWearoutLevel | 1.3.6.1.4.1.2544.1.12.3.1.101.1.3 | Integer32 | read-only | Indicated wearout level of internal SSD on server card. |
| cmEntityConformance | 1.3.6.1.4.1.2544.1.12.3.2 | |||
| cmEntityCompliances | 1.3.6.1.4.1.2544.1.12.3.2.1 | |||
| cmEntityCompliance | 1.3.6.1.4.1.2544.1.12.3.2.1.1 | Describes the requirements for conformance to the CM Entity group. | ||
| cmEntityGroups | 1.3.6.1.4.1.2544.1.12.3.2.2 | |||
| cmEntityObjectGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.1 | *************** THIS OBJECT GROUP IS DEPRECATED ****************** A collection of objects used to manage the CM Entity group. | ||
| commonEntityGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.2 | A collection of common objects used to manage any F3 product family product. | ||
| psuGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.3 | A collection of objects used to manage the F3 Power Supply units. | ||
| fanGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.4 | A collection of objects used to manage the F3 Fan units. | ||
| hubshelfGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.5 | A collection of objects used to manage the CM Hub Shelf entities. | ||
| nteGe206CardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.6 | A collection of objects used to manage the GE206 Card. | ||
| nteGe201SyncECardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.7 | A collection of objects used to manage the GE201 Sync Ethernet Card. | ||
| nteGe201NonSyncECardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.8 | A collection of objects used to manage the GE201 Non SyncE Card. | ||
| nteGe206FCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.9 | A collection of objects used to manage the GE206F Card. | ||
| nteGe112CardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.10 | A collection of objects used to manage the GE112 Card. | ||
| nteGe114CardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.11 | A collection of objects used to manage the GE114 Card. | ||
| nteGe206VCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.12 | A collection of objects used to manage the GE206V Card. | ||
| nteXg210CardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.13 | A collection of objects used to manage the XG210 Card. | ||
| pseudoWireCardOcnStmCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.14 | A collection of objects used to manage the Pseudo Wire OCN/STM Card. | ||
| pseudoWireCardE1T1CardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.15 | A collection of objects used to manage the Pseudo Wire E1/T1 Card. | ||
| nteT1804CardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.16 | A collection of objects used to manage the T1804 Card. | ||
| nteT3204CardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.17 | A collection of objects used to manage the T3204 Card. | ||
| nteGeSyncProbeCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.18 | A collection of objects used to manage the GE SyncProbe Card. | ||
| xg1XCCCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.19 | A collection of objects used to manage the XG 1X CC Card. | ||
| xg1SCCCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.20 | A collection of objects used to manage the XG 1S CC Card. | ||
| ge4ECCCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.21 | A collection of objects used to manage the GE 4E CC Card. | ||
| ge4SCCCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.22 | A collection of objects used to manage the GE 4S CC Card. | ||
| ge8SCCCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.23 | A collection of objects used to manage the GE 8S CC Card. | ||
| nteGe114HCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.24 | A collection of objects used to manage the GE114H Card. | ||
| nteGe114PHCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.25 | A collection of objects used to manage the GE114PH Card. | ||
| ethernetOverOCSTMCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.26 | A collection of objects used to manage the cards. | ||
| ethernet1x10GHighPerCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.27 | A collection of objects used to manage the cards. | ||
| ethernetFE36ECardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.28 | A collection of objects used to manage the cards. | ||
| nteGe114SHCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.29 | A collection of objects used to manage the GE114SH Card. | ||
| nteGe114SCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.30 | A collection of objects used to manage the GE114S Card. | ||
| ge8ECCCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.31 | A collection of objects used to manage the GE 8E CC Card. | ||
| neLLDPParamsGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.32 | A collection of objects used to manage the LLDP params on NE. | ||
| nteSh1PcsCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.33 | A collection of objects used to manage the SH1PCS Card. | ||
| nteOsa5411CardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.34 | A collection of objects used to manage the OSA5411 Card. | ||
| nteGe112ProCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.35 | A collection of objects used to manage the GE112Pro Card. | ||
| nteGe112ProMCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.36 | A collection of objects used to manage the GE112ProM Card. | ||
| nteGe114ProCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.37 | A collection of objects used to manage the GE114Pro Card. | ||
| nteGe114ProCCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.38 | A collection of objects used to manage the GE114ProC Card. | ||
| nteGe114ProSHCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.39 | A collection of objects used to manage the GE114ProSH Card. | ||
| nteGe114ProCSHCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.40 | A collection of objects used to manage the GE114ProCSH Card. | ||
| nteGe114ProHECardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.41 | A collection of objects used to manage the GE114ProHE Card. | ||
| nteGe112ProHCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.42 | A collection of objects used to manage the GE112ProH Card. | ||
| nteXg210CCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.43 | A collection of objects used to manage the XG210 Card. | ||
| geGE8SCryptoConnectorCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.44 | A collection of objects used to manage the GE 8S CC Card. | ||
| nteOsa5420CardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.45 | A collection of objects used to manage the OSA5420 Card. | ||
| nteOsa5421CardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.46 | A collection of objects used to manage the OSA5421 Card. | ||
| nteGe114GCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.47 | A collection of objects used to manage the GE114G Card. | ||
| bits16PortCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.48 | A collection of objects used to manage the BITS 16 PORT EXP Card. | ||
| nteGE114ProVmHCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.49 | A collection of objects used to manage the GE114ProVmH Card. | ||
| nteGE114ProVmCHCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.50 | A collection of objects used to manage the GE114ProVmCH Card. | ||
| nteGE114ProVmCSHCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.51 | A collection of objects used to manage the GE114ProVmCSH Card. | ||
| serverCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.52 | A collection of objects used to manage the Server Card. | ||
| pps16PortCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.53 | A collection of objects used to manage the PPS 16 PORT EXP Card. | ||
| clk16PortCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.54 | A collection of objects used to manage the PPS 16 PORT EXP Card. | ||
| todPps16PortCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.55 | A collection of objects used to manage the PPS 16 PORT EXP Card. | ||
| nteGe101ProCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.56 | A collection of objects used to manage the GE101Pro Card. | ||
| nteGo102ProSCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.57 | A collection of objects used to manage the GO102ProS Card. | ||
| nteGo102ProSPCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.58 | A collection of objects used to manage the GO102ProSP Card. | ||
| nteCx101Pro30ACardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.59 | A collection of objects used to manage the CX101Pro30A Card. | ||
| nteCx102Pro30ACardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.60 | A collection of objects used to manage the CX102Pro30A Card. | ||
| ge4PortCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.61 | A collection of objects used to manage the GE 4 PORT EXP Card. | ||
| nteXg116ProCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.62 | A collection of objects used to manage the XG116PRO Card. | ||
| nteXg120ProCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.63 | A collection of objects used to manage the XG120PRO Card. | ||
| nteGE112ProVmCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.64 | A collection of objects used to manage the GE112ProVm Card. | ||
| nteOsa5401CardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.65 | A collection of objects used to manage the OSA5401 Card. | ||
| nteOsa5405CardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.66 | A collection of objects used to manage the OSA5405 Card. | ||
| csmCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.67 | A collection of objects used to manage the CSM Card. | ||
| auxPortCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.68 | A collection of objects used to manage the Auxiliary Port Expansion Card. | ||
| nteGe102ProHCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.69 | A collection of objects used to manage the GE102Pro H Card. | ||
| nteGe102ProEFMHCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.70 | A collection of objects used to manage the GE102Pro EFMH Card. | ||
| ethernetOsa3350MgntCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.71 | A collection of objects used to manage the OSA3350 Mgnt Card. | ||
| nteXg116ProHCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.72 | A collection of objects used to manage the XG116PRO (H) Card. | ||
| nteGo102ProSMCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.73 | A collection of objects used to manage the GO102ProSM Card. | ||
| nteXg118ProSHCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.74 | A collection of objects used to manage the XG118PRO (SH) Card. | ||
| nteXg118ProacSHCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.75 | A collection of objects used to manage the XG118PROAC (SH) Card. | ||
| nteGE114ProVmSHCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.76 | A collection of objects used to manage the GE114ProVmSH Card. | ||
| nteGE104CardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.77 | A collection of objects used to manage the GE104 Card. | ||
| nteXg120ProSHCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.78 | A collection of objects used to manage the XG120PROSH Card. | ||
| mbGnssCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.79 | A collection of objects used to manage the MB GNSS EXP Card. | ||
| f3IrigCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.80 | A collection of objects used to manage the IRIG Card. | ||
| compositeClockCardGroup | 1.3.6.1.4.1.2544.1.12.3.2.2.81 | A collection of objects used to manage the COMPOSITE CLOCK EXP Card. |
FAQ
How does CM-ENTITY-MIB help track ADVA FSP150CM/CC network elements under management?
It exposes a network-element inventory table with each element's name, type, contact, physical location, and description, plus objects showing whether a discovered element has been accepted into management, giving an operator immediate visibility into which optical transport nodes are known and managed.
What would I check in CM-ENTITY-MIB if a newly installed FSP150 element isn't showing up as managed?
You'd check the element's management-acceptance status and provisioning-action objects in the network element table -- if the element hasn't been marked as accepted, that explains why it isn't fully under management even though it's been discovered.
RFC description
ADVA vendor-specific extension to ENTITY-MIB (RFC 2737) providing entity management for F3 FSP150CM/CC optical networking product lines.
Start monitoring ADVA/Ceragon FSP150 CM/CC (F3) microwave & Carrier Ethernet transport platform with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.