All MIBs › CM-FACILITY-MIB › cmEthernetTrafficPortOuterVlanLoopback1
cmEthernetTrafficPortOuterVlanLoopback1
Module: CM-FACILITY-MIB
OID (symbolic): CM-FACILITY-MIB::cmEthernetTrafficPortOuterVlanLoopback1
OID (numeric): 1.3.6.1.4.1.2544.1.12.4.1.27.1.26
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description: This object allows specification of the outer VLAN 1 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetTrafficPortOuterVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
What is cmEthernetTrafficPortOuterVlanLoopback1?
cmEthernetTrafficPortOuterVlanLoopback1 is a read-write string specifying the outer VLAN 1 value to be looped back when the port is in VLAN loopback configuration, valid only if the corresponding bit in the loopback mask is set. An administrator enters the specific VLAN ID here to define exactly which tagged traffic is captured by the first of up to three VLAN loopback slots on this port. For example, to loop back only traffic tagged with outer VLAN 100, an operator would set this object to 100 and set the matching bit in cmEthernetTrafficPortOuterVlanLoopbackMask.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.4.1.27.1.26 snmpwalk -v2c -c public <target> CM-FACILITY-MIB::cmEthernetTrafficPortOuterVlanLoopback1
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.4.1.27.1.26.1 snmpget -v2c -c public <target> CM-FACILITY-MIB::cmEthernetTrafficPortOuterVlanLoopback1.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2544.1.12.4.1.27.1.26.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cmEthernetTrafficPortOuterVlanLoopback1.1
Start monitoring ADVA/Ceragon FSP150 CM/CC (F3) microwave & Carrier Ethernet transport platform with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CM-FACILITY-MIB::cmEthernetTrafficPortOuterVlanLoopback1 OID value, configure state conditions and alerts, and monitor any ADVA/Ceragon FSP150 CM/CC (F3) microwave & Carrier Ethernet transport platform from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2544 | advaMIB | ADVA-MIB |
| 1.3.6.1.4.1.2544.1 | products | ADVA-MIB |
| 1.3.6.1.4.1.2544.1.12 | fsp150cm | ADVA-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2544.1.12.4 | cmFacilityMIB | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1 | cmFacilityObjects | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.27 | cmEthernetTrafficPortTable | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1 | cmEthernetTrafficPortEntry | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.26 | cmEthernetTrafficPortOuterVlanLoopback1 | CM-FACILITY-MIB |