All MIBs › CM-FACILITY-MIB › stsVcPathLoopbackConfig
stsVcPathLoopbackConfig
Module: CM-FACILITY-MIB
OID (symbolic): CM-FACILITY-MIB::stsVcPathLoopbackConfig
OID (numeric): 1.3.6.1.4.1.2544.1.12.4.1.48.1.7
Node type: OBJECT-TYPE
Type: CmLoopbackType
Access: read-write
Description:
This object allows to initiate loopbacks on on the OCn Path.
What is stsVcPathLoopbackConfig?
This OID initiates loopback testing on an STS/VC (optical circuit) path to isolate transmission faults. Loopback sends traffic back to the source to verify the path works. Optical engineers use this to diagnose whether a circuit failure is local or remote.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.4.1.48.1.7 snmpwalk -v2c -c public <target> CM-FACILITY-MIB::stsVcPathLoopbackConfig
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.4.1.48.1.7.1 snmpget -v2c -c public <target> CM-FACILITY-MIB::stsVcPathLoopbackConfig.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2544.1.12.4.1.48.1.7.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> stsVcPathLoopbackConfig.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.2544 | advaMIB | ADVA-MIB |
| 1.3.6.1.4.1.2544.1 | products | ADVA-MIB |
| 1.3.6.1.4.1.2544.1.12 | fsp150cm | ADVA-MIB |
| 1.3.6.1.4.1.2544.1.12.4 | cmFacilityMIB | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1 | cmFacilityObjects | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.48 | stsVcPathTable | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.48.1 | stsVcPathEntry | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.48.1.7 | stsVcPathLoopbackConfig | CM-FACILITY-MIB |