All MIBs › CM-FACILITY-MIB › cmFlowA2NEIRHi
cmFlowA2NEIRHi
Module: CM-FACILITY-MIB
OID (symbolic): CM-FACILITY-MIB::cmFlowA2NEIRHi
OID (numeric): 1.3.6.1.4.1.2544.1.12.4.1.4.1.22
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-create
Description:
This object represents the Excess Information Rate(EIR) on an Flow in the Access to Network (A2N) direction. For a portbased Flow(FSP150CM NTU, CPMR), this object is not settable. This value represents the higher 32-bits of the CIR. For a Multi COS flow, this value is settable only at creation time.
In case of Tranparent Flow this object represents N1 to N2 EIR.
What is cmFlowA2NEIRHi?
This OID specifies the upper limit on burst traffic a network flow is allowed to send from access to network direction, using the higher 32 bits of the value. It controls how much extra bandwidth beyond the guaranteed minimum can be used during traffic peaks. A service provider would set this when provisioning service guarantees to a customer.
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.2544 | advaMIB | ADVA-MIB |
| 1.3.6.1.4.1.2544.1 | products | ADVA-MIB |
| 1.3.6.1.4.1.2544.1.12 | fsp150cm | ADVA-MIB |
| 1.3.6.1.4.1.2544.1.12.4 | cmFacilityMIB | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1 | cmFacilityObjects | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.4 | cmFlowTable | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1 | cmFlowEntry | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.22 | cmFlowA2NEIRHi | CM-FACILITY-MIB |