All MIBs › CM-FACILITY-MIB › sciPortSignalMode
sciPortSignalMode
Module: CM-FACILITY-MIB
OID (symbolic): CM-FACILITY-MIB::sciPortSignalMode
OID (numeric): 1.3.6.1.4.1.2544.1.12.4.1.105.1.4
Node type: OBJECT-TYPE
Type: SciSignalMode
Access: read-write
Description:
This object allows to manage the signal mode of the SCI port.
What is sciPortSignalMode?
This object configures the signal mode used by a Synchronous Channels Interface (SCI) port on the device. The SCI port carries time-division-multiplexed synchronous signals, and the signal mode determines how the port encodes and interprets these signals. Network operators set this to match the protocol and framing standard required by the connected equipment.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.4.1.105.1.4 snmpwalk -v2c -c public <target> CM-FACILITY-MIB::sciPortSignalMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.4.1.105.1.4.1 snmpget -v2c -c public <target> CM-FACILITY-MIB::sciPortSignalMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2544.1.12.4.1.105.1.4.1 s <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.2544 | advaMIB | ADVA-MIB |
| 1.3.6.1.4.1.2544.1 | products | ADVA-MIB |
| 1.3.6.1.4.1.2544.1.12 | fsp150cm | ADVA-MIB |
| 1.3.6.1.4.1.2544.1.12.4 | cmFacilityMIB | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1 | cmFacilityObjects | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.105 | sciPortTable | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.105.1 | sciPortEntry | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.105.1.4 | sciPortSignalMode | CM-FACILITY-MIB |