All MIBs › CM-FACILITY-MIB › cmEthernetAccPortOuterVlanLoopback3
cmEthernetAccPortOuterVlanLoopback3
Module: CM-FACILITY-MIB
OID (symbolic): CM-FACILITY-MIB::cmEthernetAccPortOuterVlanLoopback3
OID (numeric): 1.3.6.1.4.1.2544.1.12.4.1.1.1.36
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description: This object allows specification of the outer VLAN 3 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetAccPortOuterVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
What is cmEthernetAccPortOuterVlanLoopback3?
This read-write DisplayString (up to 6 characters) specifies outer VLAN entry 3, in the form VLAN Id-Priority, to be looped back when the port is in VLAN loopback mode and the corresponding mask bit is set. It gives a third slot so up to three separate outer VLANs can be tested concurrently on the same port. For example, an administrator sets '300-*' to add a third customer VLAN to the concurrent loopback test.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.4.1.1.1.36 snmpwalk -v2c -c public <target> CM-FACILITY-MIB::cmEthernetAccPortOuterVlanLoopback3
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.4.1.1.1.36.1 snmpget -v2c -c public <target> CM-FACILITY-MIB::cmEthernetAccPortOuterVlanLoopback3.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2544.1.12.4.1.1.1.36.1 s <value>
Start monitoring ADVA/Ceragon FSP150 CM/CC (F3) microwave & Carrier Ethernet transport platform with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CM-FACILITY-MIB::cmEthernetAccPortOuterVlanLoopback3 OID value, configure state conditions and alerts, and monitor any ADVA/Ceragon FSP150 CM/CC (F3) microwave & Carrier Ethernet transport platform from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2544 | advaMIB | ADVA-MIB |
| 1.3.6.1.4.1.2544.1 | products | ADVA-MIB |
| 1.3.6.1.4.1.2544.1.12 | fsp150cm | ADVA-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2544.1.12.4 | cmFacilityMIB | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1 | cmFacilityObjects | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.1 | cmEthernetAccPortTable | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1 | cmEthernetAccPortEntry | CM-FACILITY-MIB |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.36 | cmEthernetAccPortOuterVlanLoopback3 | CM-FACILITY-MIB |