CM-FACILITY-MIB :: f3PolicerEnvelopeCouplingFlag

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCM-FACILITY-MIBf3PolicerEnvelopeCouplingFlag

f3PolicerEnvelopeCouplingFlag

Module: CM-FACILITY-MIB

OID (symbolic): CM-FACILITY-MIB::f3PolicerEnvelopeCouplingFlag

OID (numeric): 1.3.6.1.4.1.2544.1.12.4.1.82.1.2

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: This object allows specification of Policer Envelope Coupling Flag. When coupling is enabled, tokens that would normally be added to the C-bucket are passed to the E-bucket only once the CIR bucket has reached its CBS level. Therefore under this condition the E-bucket is being filled at the rate of CIR + EIR. Normally the long term average of frames declared yellow, which is bounded by the EIR. Coupling is a function to allow the long term average of frames declared yellow to be bounded by CIR + EIR. This allows a higher volume of yellow frames to be delivered/received if the arrival of green marked frames is low. Tokens from the E-bucket do NOT get passed to the C-bucket once the EBS level has been reached. Enabling coupling in combination with a provisioned EIR of 0 allows for a single rate three color marking (srTCM) algorithm to be established. In this situation the E-bucket is filled at the CIR rate in the case the C-bucket is filled to its CBS level

What is f3PolicerEnvelopeCouplingFlag?

This read-write TruthValue enables or disables coupling for a shared Policer Envelope, a bucket that can be referenced by multiple policers. When coupling is enabled, tokens that would normally fill the CIR (C) bucket instead spill into the EIR (E) bucket once the C-bucket reaches its committed burst size, so the combined excess capacity fills at CIR+EIR; this lets an administrator let several flows sharing one envelope draw on pooled excess bandwidth rather than each being capped independently. For example, enabling coupling on an envelope shared by several low-priority data flows lets any one of them borrow unused committed bandwidth from the others during a burst.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.4.1.82.1.2
snmpwalk -v2c -c public <target> CM-FACILITY-MIB::f3PolicerEnvelopeCouplingFlag

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.4.1.82.1.2.1
snmpget -v2c -c public <target> CM-FACILITY-MIB::f3PolicerEnvelopeCouplingFlag.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2544.1.12.4.1.82.1.2.1 s <value>

Start monitoring ADVA/Ceragon FSP150 CM/CC (F3) microwave & Carrier Ethernet transport platform with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CM-FACILITY-MIB::f3PolicerEnvelopeCouplingFlag OID value, configure state conditions and alerts, and monitor any ADVA/Ceragon FSP150 CM/CC (F3) microwave & Carrier Ethernet transport platform from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2544advaMIBADVA-MIB
1.3.6.1.4.1.2544.1productsADVA-MIB
1.3.6.1.4.1.2544.1.12fsp150cmADVA-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2544.1.12.4cmFacilityMIBCM-FACILITY-MIB
1.3.6.1.4.1.2544.1.12.4.1cmFacilityObjectsCM-FACILITY-MIB
1.3.6.1.4.1.2544.1.12.4.1.82f3PolicerEnvelopeTableCM-FACILITY-MIB
1.3.6.1.4.1.2544.1.12.4.1.82.1f3PolicerEnvelopeEntryCM-FACILITY-MIB
1.3.6.1.4.1.2544.1.12.4.1.82.1.2f3PolicerEnvelopeCouplingFlagCM-FACILITY-MIB