CM-FACILITY-MIB :: clk16PortGroupSquelchQL

MIB Reference — IPNetwork Monitor

All MIBsCM-FACILITY-MIBclk16PortGroupSquelchQL

clk16PortGroupSquelchQL

Module: CM-FACILITY-MIB

OID (symbolic): CM-FACILITY-MIB::clk16PortGroupSquelchQL

OID (numeric): 1.3.6.1.4.1.2544.1.12.4.1.80.1.9

Node type: OBJECT-TYPE

Type: SSMQualityLevel

Access: read-only

Description:

This object allows to set the Squelch QL for the 10MHz port. This value is used when f310MHzClockPortSquelchControl is squelch-ql. The Squelch QL is used to determine whether or not to squelch the output of the TOD port. If the system's QL is lower than the Squelch QL, the output is squelched.

What is clk16PortGroupSquelchQL?

This OID sets a quality threshold for a 10 MHz timing output port, suppressing the output if the system's time quality drops below this level. Squelching poor-quality timing prevents dependent equipment from locking to unreliable time references. A timing engineer adjusts this when equipment downstream requires a minimum time accuracy level.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.4.1.80.1.9
snmpwalk -v2c -c public <target> CM-FACILITY-MIB::clk16PortGroupSquelchQL

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.4.1.80.1.9.1
snmpget -v2c -c public <target> CM-FACILITY-MIB::clk16PortGroupSquelchQL.1

OID Breakdown

Numeric OIDNameModule
1isoLANART-AGENT
1.3orgBIANCA-BRICK-PPP-MIB
1.3.6dodBIANCA-BRICK-PPP-MIB
1.3.6.1internetBIANCA-BRICK-PPP-MIB
1.3.6.1.4privateBIANCA-BRICK-PPP-MIB
1.3.6.1.4.1enterprisesANIROOT-MIB
1.3.6.1.4.1.2544advaMIBADVA-MIB
1.3.6.1.4.1.2544.1productsADVA-MIB
1.3.6.1.4.1.2544.1.12fsp150cmADVA-MIB
1.3.6.1.4.1.2544.1.12.4cmFacilityMIBCM-FACILITY-MIB
1.3.6.1.4.1.2544.1.12.4.1cmFacilityObjectsCM-FACILITY-MIB
1.3.6.1.4.1.2544.1.12.4.1.80clk16PortGroupTableCM-FACILITY-MIB
1.3.6.1.4.1.2544.1.12.4.1.80.1clk16PortGroupEntryCM-FACILITY-MIB
1.3.6.1.4.1.2544.1.12.4.1.80.1.9clk16PortGroupSquelchQLCM-FACILITY-MIB