F3-LAG-MIB

All MIBs › F3-LAG-MIB

Organization: ADVA Optical Networking

Last Updated: 2016-04-06

Category: Technology: Link Aggregation, Vendor: ADVA Optical

Description: ADVA Optical Networking F3 platform MIB for Link Aggregation Group (LAG) configuration and status on FSP 150 Ethernet ports.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is F3-LAG-MIB?

F3-LAG-MIB is an ADVA Optical Networking proprietary MIB extending the standard IEEE 802.3ad (802.3-2005) Link Aggregation Group model for the FSP150CM (F3) 5.1 product line. Its LAG table, keyed by index, records the associated ifIndex, name, supported protocols, LACP control, mode, CCM-defect-detection enable, a statistics-reset action, storage/row status, partner-collector-max-delay-ignore flag, frame-distribution algorithm, and a discard-wrong-conversation flag, while a statistics table counts transmitted/received unicast, multicast, and broadcast octets/frames. As a configuration/performance MIB it lets an administrator confirm a LAG's frame-distribution algorithm and watch its traffic counters. It is deployed on ADVA Optical Networking FSP150CM (F3) platforms. Engineers can download the F3-LAG-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in F3-LAG-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ADVA Optical Networking FSP150CM (F3) platforms

Monitoring Examples

An administrator checks f3LagFrameDistAlgorithm to confirm traffic is being load-balanced across LAG members using the intended hashing method on an ADVA FSP150CM platform.

What Can Be Monitored

LAG configuration and per-member traffic counters

Imported Objects

From ADVA-MIB

fsp150cm

OBJECT-IDENTITY

From CM-COMMON-MIB

CmPmBinAction

From CM-ENTITY-MIB

neIndex	OBJECT-TYPE
shelfIndex	OBJECT-TYPE
slotIndex	OBJECT-TYPE

From IF-MIB

InterfaceIndex

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DateAndTime
DisplayString
RowStatus
StorageType
TEXTUAL-CONVENTION
TruthValue
VariablePointer

How to Use in IPNetwork Monitor

Example using f3LagStatsOctetsTxOK OID:

Select an ADVA Optical Networking FSP150CM/CC (F3 platform) carrier Ethernet device (802.3ad Link Aggregation extensions) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type f3LagStatsOctetsTxOK into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports a count of the data and padding octets transmitted by this Aggregator on all Aggregation Ports that are (or have been) members of the aggregation. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
T/F f3LagCcmDefectsDetectionEnabled	1.3.6.1.4.1.2544.1.12.14.1.1.1.7	TruthValue	read-write	This object allows for a LAG to use CCM defects DefRemoteCCM and DefRDICCM as an indication of Signal Fail for the LAG member ports. When enabled, a LAG member will stop carrying service frames when a DefRemoteCCM or DefRDICCM is detected on a port level CFM DOWN MEP associated with the LAG member port. Please note that port level CFM DOWN MEPs need to be created on LAG member ports for this feature to work.
f3LagCompliance	1.3.6.1.4.1.2544.1.12.14.2.1.1			Describes the requirements for conformance to the f3Lag group.
f3LagCompliances	1.3.6.1.4.1.2544.1.12.14.2.1
f3LagConformance	1.3.6.1.4.1.2544.1.12.14.2
T/F f3LagDiscardWrongConversation	1.3.6.1.4.1.2544.1.12.14.1.1.1.13	TruthValue	read-write	This object is used to control and identify whether frames received on a LAG member port are to be discarded if the service associated with the frame (ingress membership) does not match the service-to-link mapping of the LAG Service Map.
f3LagEntry	1.3.6.1.4.1.2544.1.12.14.1.1.1		not-accessible	An entry containing information applicable to a particular security user.
LAG f3LagFrameDistAlgorithm	1.3.6.1.4.1.2544.1.12.14.1.1.1.12	LagFrameDistributionAlgorithmType	read-write	The frame distribution algorithm used by the LAG for transmitting frames on the individual LAG member ports. For an active-standby LAG, this will be active-standby. A loadsharing LAG will follow service-assignment frame distribution. The srcdst-mac-hash method is not supported on CC-NIDS.
f3LagGroups	1.3.6.1.4.1.2544.1.12.14.2.2
NUM f3LagIfIndex	1.3.6.1.4.1.2544.1.12.14.1.1.1.2	InterfaceIndex	read-only	This object has the same value as ifIndex for LAG logical Port. An integer index value used to uniquely identify this LAG logical Port.
T/F f3LagIgnorePartnerColMaxDelay	1.3.6.1.4.1.2544.1.12.14.1.1.1.11	TruthValue	read-create	This object is used to configure LAG instance to ignore Collector Max Delay value in the received LACP PDU. Setting this value to TRUE will result in no hold-off timer to be started, regardless of the received Collector Max Delay value.
I32 f3LagIndex	1.3.6.1.4.1.2544.1.12.14.1.1.1.1	Integer32	not-accessible	An integer index value used to uniquely identify this Lag. It should be the Lag Logical index.
T/F f3LagLacpControl	1.3.6.1.4.1.2544.1.12.14.1.1.1.5	TruthValue	read-write	Determines whether or not the Link Aggregation Control Protocol is enabled or disabled for the LAG. When disabled, the LAG shall ignore LACP frames for the purpose of selecting the active link (port) and shall select its active link (port) solely upon the status of the LAG member links (ports). However, when disabled, the LACP protocol shall remain active (i.e. LACP frames are transmitted when needed, etc.).
f3LagMIB	1.3.6.1.4.1.2544.1.12.14			This module defines the vendor specific 802.3ad LAG MIB definitions used by the FSP150CM 5.1 product lines, as extensions to the standard IEEE 802.3ad (802.3-2005). Copyright (C) ADVA Optical Networking.
AGG f3LagMode	1.3.6.1.4.1.2544.1.12.14.1.1.1.6	AggMode	read-write	Defines the LAG behavior. A LAG with mode active-standby - exhibits 1:1 protection behavior loadsharing - exhibits port aggregation behavior An active-standby LAG supports 0-2 member ports. One member is in Active role while the other is in Standby role. A loadsharing LAG can have multiple (0-x) member ports, where x is as follows. x = 2 for GE112Pro, GE114Pro, GE206V (Network ports only) x = 2 for XG210 Network ports, x = 10 for XG210 Access ports x = 4 for XG116Pro, XG120Pro (10G ports) x = 6 for XG116Pro GE ports x = 10 for XG120Pro GE ports In CM Aggregation Shelf, the loadsharing LAG can have 2-8 member ports.
STR f3LagName	1.3.6.1.4.1.2544.1.12.14.1.1.1.3	DisplayString	read-write	This object allows SNMP management entities to name the LAG aggregator.
f3LagObjectGroup	1.3.6.1.4.1.2544.1.12.14.2.2.1			A collection of objects used to manage the f3Lag group.
f3LagObjects	1.3.6.1.4.1.2544.1.12.14.1
f3LagPortEntry	1.3.6.1.4.1.2544.1.12.14.1.3.1		not-accessible	An entry containing information applicable to a particular security user.
I32 f3LagPortIndex	1.3.6.1.4.1.2544.1.12.14.1.3.1.1	Integer32	not-accessible	The unique identifier for each Aggregation Port.
T/F f3LagPortLacpForceOutOfSync	1.3.6.1.4.1.2544.1.12.14.1.3.1.3	TruthValue	read-write	A boolean value which enables or disables the port from participating as an active port in the Link Aggregation Group, causing the link (port) to transmit OUT_OF_SYNC via LACP.
NUM f3LagPortMember	1.3.6.1.4.1.2544.1.12.14.1.3.1.2	VariablePointer	read-create	This is the OID of the LAG member port.
ROW f3LagPortRowStatus	1.3.6.1.4.1.2544.1.12.14.1.3.1.7	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3LagPortRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3LagPortRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3LagPortRowStatus object may be modified if the associated instance of this object is equal to active(1).
AGG f3LagPortState	1.3.6.1.4.1.2544.1.12.14.1.3.1.4	AggPortState	read-only	This object can be used to show the current status of the member port. Active: the member port is ready for transporting and is in working now. Standby: the member port is ready for transporting, but is not working now.
CMP f3LagPortStatsAction	1.3.6.1.4.1.2544.1.12.14.1.3.1.5	CmPmBinAction	read-write	Allows the Manager to clear the LAG Port level statistics (dot3adAggPortStatsTable).
STO f3LagPortStorageType	1.3.6.1.4.1.2544.1.12.14.1.3.1.6	StorageType	read-create	The type of storage configured for this entry.
f3LagPortTable	1.3.6.1.4.1.2544.1.12.14.1.3		not-accessible	A list of entries corresponding to the LAG member ports. Entries can be created/deleted in this table by management application action.
T/F f3LagProtocols	1.3.6.1.4.1.2544.1.12.14.1.1.1.4	TruthValue	read-write	When this object is enabled, the LACP will run as 802.3ad defines; When this object is disabled, LACP/LAMP protocols will not run and the LAG member port is fixed to an assigned LAG aggregator.
ROW f3LagRowStatus	1.3.6.1.4.1.2544.1.12.14.1.1.1.10	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3LagRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3LagRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3LagRowStatus object may be modified if the associated instance of this object is equal to active(1).
I32 f3LagServiceMapCurrentMemberLink	1.3.6.1.4.1.2544.1.12.14.1.4.1.7	Integer32	read-only	The current member link ifindex value.
f3LagServiceMapEntry	1.3.6.1.4.1.2544.1.12.14.1.4.1		not-accessible	An entry containing information applicable to a particular security user.
I32 f3LagServiceMapIndex	1.3.6.1.4.1.2544.1.12.14.1.4.1.1	Integer32	not-accessible	The unique identifier for each entry/row in the Service Map.
LIN f3LagServiceMapLinkAssignMode	1.3.6.1.4.1.2544.1.12.14.1.4.1.3	LinkAssignMode	read-write	The assign mode value.
STR f3LagServiceMapMemberLinkList	1.3.6.1.4.1.2544.1.12.14.1.4.1.6	DisplayString	read-write	The member link list value, describe by ifindex value string split with comma.
ROW f3LagServiceMapRowStatus	1.3.6.1.4.1.2544.1.12.14.1.4.1.5	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3LagServiceMapRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3LagServiceMapRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3LagServiceMapRowStatus object may be modified if the associated instance of this object is equal to active(1).
NUM f3LagServiceMapServiceObj	1.3.6.1.4.1.2544.1.12.14.1.4.1.2	VariablePointer	read-create	This is the OID of the LAG service object.
STO f3LagServiceMapStorageType	1.3.6.1.4.1.2544.1.12.14.1.4.1.4	StorageType	read-create	The type of storage configured for this entry.
f3LagServiceMapTable	1.3.6.1.4.1.2544.1.12.14.1.4		not-accessible	A list of entries corresponding to the LAG service map entry. Entries can be created/deleted in this table by management application action.
CMP f3LagStatsAction	1.3.6.1.4.1.2544.1.12.14.1.1.1.8	CmPmBinAction	read-write	Allows the Manager to clear the LAG level statistics (f3LagStatsTable).
C32 f3LagStatsBroadcastFramesRxOK	1.3.6.1.4.1.2544.1.12.14.1.2.1.9	Counter32	read-only	A count of the broadcast data frames received by this Aggregator, from the Aggregation Ports that are (or have been) members of the aggregation.
C32 f3LagStatsBroadcastFramesTxOK	1.3.6.1.4.1.2544.1.12.14.1.2.1.8	Counter32	read-only	A count of the broadcast data frames transmitted by this Aggregator on all Aggregation Ports that are (or have been) members of the aggregation.
f3LagStatsEntry	1.3.6.1.4.1.2544.1.12.14.1.2.1		not-accessible	An entry containing information on the LAG logical port statistics.
C32 f3LagStatsFramesRxOK	1.3.6.1.4.1.2544.1.12.14.1.2.1.5	Counter32	read-only	A count of the data frames received by this Aggregator, from the Aggregation Ports that are (or have been) members of the aggregation.
C32 f3LagStatsFramesTxOK	1.3.6.1.4.1.2544.1.12.14.1.2.1.4	Counter32	read-only	A count of the data frames transmitted by this Aggregator on all Aggregation Ports that are (or have been) members of the aggregation.
C32 f3LagStatsFramesWithRxErrors	1.3.6.1.4.1.2544.1.12.14.1.2.1.11	Counter32	read-only	A count of data frames discarded on reception by all ports that are (or have been) members of the aggregation, or that were discarded by the Collection function of the Aggregator, or that were discarded by the Aggregator due to the detection of an illegal Slow Protocols PDU.
C32 f3LagStatsFramesWithTxErrors	1.3.6.1.4.1.2544.1.12.14.1.2.1.10	Counter32	read-only	A count of data frames requested to be transmitted by this Aggregator that experienced transmission errors on ports that are (or have been) members of the aggregation.
I32 f3LagStatsIndex	1.3.6.1.4.1.2544.1.12.14.1.2.1.1	Integer32	not-accessible	The unique identifier to access a unique row in the f3LagStatsTable.
C32 f3LagStatsMulticastFramesRxOK	1.3.6.1.4.1.2544.1.12.14.1.2.1.7	Counter32	read-only	A count of the data frames received by this Aggregator, from the Aggregation Ports that are (or have been) members of the aggregation, that were addressed to an active group address other than the broadcast address.
C32 f3LagStatsMulticastFramesTxOK	1.3.6.1.4.1.2544.1.12.14.1.2.1.6	Counter32	read-only	A count of the data frames transmitted by this Aggregator on all Aggregation Ports that are (or have been) members of the aggregation, to a group destination address other than the broadcast address.
C32 f3LagStatsOctetsRxOK	1.3.6.1.4.1.2544.1.12.14.1.2.1.3	Counter32	read-only	A count of the data and padding octets received by this Aggregator, from the Aggregation Ports that are (or have been) members of the aggregation.
C32 f3LagStatsOctetsTxOKEx	1.3.6.1.4.1.2544.1.12.14.1.2.1.2	Counter32	read-only	A count of the data and padding octets transmitted by this Aggregator on all Aggregation Ports that are (or have been) members of the aggregation.
f3LagStatsTable	1.3.6.1.4.1.2544.1.12.14.1.2		not-accessible	A list of entries corresponding to the LAG statistics. Entries cannot be created in this table by management application action.
C32 f3LagStatsUnknownProtocolFrames	1.3.6.1.4.1.2544.1.12.14.1.2.1.12	Counter32	read-only	A count of data frames discarded on reception by all ports that are (or have been) members of the aggregation, due to the detection of an unknown Slow Protocols PDU.
STO f3LagStorageType	1.3.6.1.4.1.2544.1.12.14.1.1.1.9	StorageType	read-create	The type of storage configured for this entry.
f3LagTable	1.3.6.1.4.1.2544.1.12.14.1.1		not-accessible	A list of entries corresponding to the Link Aggregation Groups. Entries can be created/deleted in this table by management application action.

RFC description

ADVA FSP150CM link aggregation group (LAG) MIB; defines 802.3ad LAG configuration, member ports, and statistics extensions.

Start monitoring ADVA Optical Networking FSP150CM/CC (F3 platform) carrier Ethernet device (802.3ad Link Aggregation extensions) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download F3-LAG-MIB