COSINE-ORION-MIB

All MIBs › COSINE-ORION-MIB

Organization: CoSine Communications, Inc.

Last Updated: 2001-07-12

Category: IP and Core Protocols, Routing Protocols, Vendor: CoSine

Description: Manages CoSine Orion IPSX virtual router instances, interfaces, and subscriber service objects.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is COSINE-ORION-MIB?

COSINE-ORION-MIB is a CoSine Communications, Inc. (built on COSINE-GLOBAL-REG) proprietary MIB for the IPNOS (IP Network Operating System) blade-based platform. Its objects cover system IP address/netmask/gateway, firmware/major version, number of blades, temperature status, a system-reset action, system time, a shutdown action, control-blade failover, CLI RADIUS authentication, and a boot table (index, up to six boot-image names, boot port, boot-server address, local IP address). As a configuration/status MIB it lets an administrator confirm blade count, temperature, and boot-image configuration on a CoSine IPNOS blade platform. It is deployed on CoSine Communications IPNOS blade-based service platforms. Engineers can download the COSINE-ORION-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in COSINE-ORION-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

CoSine Communications IPNOS blade-based service platforms

Monitoring Examples

An administrator checks csOrionSystemTempStatus and csOrionSystemNumberOfBlades to confirm chassis health and blade inventory on a CoSine IPNOS platform.

What Can Be Monitored

blade inventory, temperature status, and boot-image configuration

Imported Objects

From COSINE-GLOBAL-REG

csModules	OBJECT-IDENTITY
csOrionMIB	OBJECT-IDENTITY

From SNMPv2-SMI

Counter32
Counter64
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
PhysAddress
RowStatus
StorageType
TEXTUAL-CONVENTION
TestAndIncr
TimeInterval
TimeStamp
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
I32 cbrFileErrorCode	1.3.6.1.4.1.3085.3.1.13.20	Integer32	accessible-for-notify	pHILE+ error code associated with the file copy operation from master to standby control blade. Please consult the pSOS Manual for the possible values and the meanings of the error code.
INT cbrFileErrorType	1.3.6.1.4.1.3085.3.1.13.19	INTEGER	accessible-for-notify	Type of error that occurred during a file copy operation from master to standby control blade: cantOpenConfig(-6) - unable to open/create config file on standby control blade cantSaveConfig(-5) - unable to save config file on standby control blade cantChangeDirConfig(-4) - unable to change directory when updating config file on standby control blade cantWritePassword(-3) - unable to write into the password file on a standby control blade cantOpenPassword(-2) - unable to open/create password file on standby control blade cantChangeDirPassword(-1) - unable to change directory when updating password file on standby control blade savedBootcfg(1) - boot config file is saved successfully on standby control blade savedConfig(2) - configuration file is saved successfully on standby control blade savedPassword(3) - password file is saved successfully on standby control blade.
STR cbrFileName	1.3.6.1.4.1.3085.3.1.13.18	DisplayString	accessible-for-notify	Name of the file that is being copied from master to standby control blade.
INT cbrFileType	1.3.6.1.4.1.3085.3.1.13.17	INTEGER	accessible-for-notify	The kind of file that is being copied from master to standby control blade: bootcfg(1) - boot configuration file config(2) - configuration file password(3) - password file
cosineOrionMod	1.3.6.1.4.1.3085.1.1.2			The MIB module to describe generic objects for IPNOS system.
I32 csAtmConnAal5CpcsReceiveSduSize	1.3.6.1.4.1.3085.3.1.3.5.2.1.15	Integer32	read-create	An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 is in use. The maximum AAL5 CPCS SDU size in octets that is supported on the receive direction of this VCC.
I32 csAtmConnAal5CpcsTransmitSduSize	1.3.6.1.4.1.3085.3.1.3.5.2.1.14	Integer32	read-create	An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 is in use. The maximum AAL5 CPCS SDU size in octets that is supported on the transmit direction of this VCC. NOTE : For now, a maximum of 1744 is supported.
INT csAtmConnAdminStatus	1.3.6.1.4.1.3085.3.1.3.5.2.1.18	INTEGER	read-create	This object is instanciated only for a connection which terminates a VCC (i.e., one which is NOT cross-connected to other connections). Its value specifies the desired administrative state of the connection.
I32 csAtmConnArpAgingTime	1.3.6.1.4.1.3085.3.1.3.5.2.1.22	Integer32	read-create	An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 Encapsulation type supports Bridging format. This objects specifies aging time (in minutes) for ARP Cache entries and it takes effect when ATM ARP module restarts.
I32 csAtmConnArpCacheSize	1.3.6.1.4.1.3085.3.1.3.5.2.1.23	Integer32	read-create	An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 Encapsulation type supports Bridging format. This objects specifies the size of ARP Cache and it takes effect when ATM ARP module restarts.
C64 csAtmConnArpErrors	1.3.6.1.4.1.3085.3.1.3.5.9.1.27	Counter64	read-only	The counter indicates the number of ARP requests/responses failed due other reasons, on ATM VC
I32 csAtmConnChannelIndex	1.3.6.1.4.1.3085.3.1.3.5.2.1.1	Integer32	not-accessible	Channel ID of this ATM connection. Currently, it will always be 0.
csAtmConnDynamicArpCacheEntry	1.3.6.1.4.1.3085.3.1.3.5.3.1		not-accessible	This list contains Dynamic ARP Entries for ATM virtual connections.
IP csAtmConnDynamicArpCacheIpAddress	1.3.6.1.4.1.3085.3.1.3.5.3.1.1	IpAddress	not-accessible	This object holds IP address associated with MAC Address.
MAC csAtmConnDynamicArpCacheMacAddress	1.3.6.1.4.1.3085.3.1.3.5.3.1.2	MacAddress	read-only	This object holds MAC address associated with IP Address.
ROW csAtmConnDynamicArpCacheRowStatus	1.3.6.1.4.1.3085.3.1.3.5.3.1.3	RowStatus	read-write	This object is used to delete a row in this table.
csAtmConnDynamicArpCacheTable	1.3.6.1.4.1.3085.3.1.3.5.3		not-accessible
INT csAtmConnEncapType	1.3.6.1.4.1.3085.3.1.3.5.2.1.16	INTEGER	read-create	The use of call control.
csAtmConnEntry	1.3.6.1.4.1.3085.3.1.3.5.2.1		not-accessible	This list contains ATM virtual connections.
MAC csAtmConnEthernetMacAddress	1.3.6.1.4.1.3085.3.1.3.5.2.1.24	MacAddress	read-only	An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 Encapsulation type supports Bridging format. This objects specifies the active MAC Address on the VCC end-point.
EVL csAtmConnEvLogArea	1.3.6.1.4.1.3085.3.1.3.5.2.1.26	EvLogArea	read-write	This object is used to set the area of event logs for ATM VCC. Events which area is not specified in this object will not be logged.
EVL csAtmConnEvLogLevel	1.3.6.1.4.1.3085.3.1.3.5.2.1.25	EvLogLevel	read-write	This object is used to set the level for details for event logs forATM VCC. Events with level higher than this object will not be logged.
I32 csAtmConnICR	1.3.6.1.4.1.3085.3.1.3.5.2.1.10	Integer32	read-create	Inital Cell rate for the connection. NOTE: This value is applicable for ABR service category.
INT csAtmConnInArpAdminStatus	1.3.6.1.4.1.3085.3.1.3.5.2.1.30	INTEGER	read-write	An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 Encapsulation type supports LLC-SNAP format. This objects specifies whether InARP services can be enabled or disbaled. Operation on this object takes immediate effect. Also this object is active when IP protocol is enabled on VC
I32 csAtmConnInArpAgingTime	1.3.6.1.4.1.3085.3.1.3.5.2.1.27	Integer32	read-write	An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 Encapsulation type supports LLC-SNAP format. This objects specifies aging time (in minutes) for InARP entries and it takes effect immediately. Also this object is active when IP protocol is enabled on VC
C64 csAtmConnInArpGenericErrors	1.3.6.1.4.1.3085.3.1.3.5.11.1.7	Counter64	read-only	The number of generic errors encountered while processing InATMARP requests and replies on the PVC.
C64 csAtmConnInArpInReplies	1.3.6.1.4.1.3085.3.1.3.5.11.1.3	Counter64	read-only	The number of InATMARP replies received on the PVC.
C64 csAtmConnInArpInReqs	1.3.6.1.4.1.3085.3.1.3.5.11.1.1	Counter64	read-only	The number of InATMARP requests received on the PVC.
C64 csAtmConnInArpInvalidInReqs	1.3.6.1.4.1.3085.3.1.3.5.11.1.5	Counter64	read-only	The number of Invalid InATMARP requests received on the PVC.
C64 csAtmConnInArpInvalidOutReqs	1.3.6.1.4.1.3085.3.1.3.5.11.1.6	Counter64	read-only	The number of InATMARP requests for which replies did not received on the PVC.
INT csAtmConnInArpManageStatus	1.3.6.1.4.1.3085.3.1.3.5.2.1.29	INTEGER	read-only	An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 Encapsulation type supports LLC-SNAP format. This objects specifies the PVC InARP status and thus will be used to control services to l3, when AtmConnInArpManageVc is enabled. Also this object is meaning full when IP protocol is enabled on VC
INT csAtmConnInArpManageVc	1.3.6.1.4.1.3085.3.1.3.5.2.1.28	INTEGER	read-write	An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 Encapsulation type supports LLC-SNAP format. This objects specifies whether PVC services to layer 3 is managed by InArp status in addition to PVC opertional status and it takes immediate effect . Also this object is active when IP protocol is enabled on VC
C64 csAtmConnInArpOutReplies	1.3.6.1.4.1.3085.3.1.3.5.11.1.4	Counter64	read-only	The number of InATMARP replies sent on the PVC.
C64 csAtmConnInArpOutReqs	1.3.6.1.4.1.3085.3.1.3.5.11.1.2	Counter64	read-only	The number of InATMARP requests sent on the PVC.
csAtmConnInArpStatisticsEntry	1.3.6.1.4.1.3085.3.1.3.5.11.1		not-accessible	This list contains ARP Entries for ATM virtual connections.
csAtmConnInArpStatisticsTable	1.3.6.1.4.1.3085.3.1.3.5.11		not-accessible
I32 csAtmConnInArpStatisticsTableEnd	1.3.6.1.4.1.3085.3.1.3.5.12	Integer32	read-only	End of this group. value undefined
csAtmConnIpAddressEntry	1.3.6.1.4.1.3085.3.1.3.5.5.1		not-accessible	This list contains ARP Entries for ATM virtual connections.
IP csAtmConnIpAddressIpAddress	1.3.6.1.4.1.3085.3.1.3.5.5.1.1	IpAddress	not-accessible	This object holds IP address for which ATM ARP module responds positively.
ROW csAtmConnIpAddressRowStatus	1.3.6.1.4.1.3085.3.1.3.5.5.1.2	RowStatus	read-create	This object is used to create, delete or modify a row in this table.
csAtmConnIpAddressTable	1.3.6.1.4.1.3085.3.1.3.5.5		not-accessible
I32 csAtmConnIpAddressTableEnd	1.3.6.1.4.1.3085.3.1.3.5.6	Integer32	read-only	End of this group. value undefined
INT csAtmConnIpAddressType	1.3.6.1.4.1.3085.3.1.3.5.5.1.3	INTEGER	read-only	This object specifies the type of IP address, i.e.,NON-PROXY-IP, or PROXY IP.
INT csAtmConnKind	1.3.6.1.4.1.3085.3.1.3.5.2.1.17	INTEGER	read-create	The use of call control.
I32 csAtmConnMBS	1.3.6.1.4.1.3085.3.1.3.5.2.1.9	Integer32	read-create	Maximum Burst Size for the connection. NOTE: This value is applicable for VBR service categories.
I32 csAtmConnMCR	1.3.6.1.4.1.3085.3.1.3.5.2.1.11	Integer32	read-create	Minimum Cell rate for the connection. NOTE: This value is applicable for ABR service category.
INT csAtmConnOamContinuity	1.3.6.1.4.1.3085.3.1.3.5.2.1.13	INTEGER	read-create	This object is used to enable/disable the continuity.
INT csAtmConnOamLoopback	1.3.6.1.4.1.3085.3.1.3.5.2.1.12	INTEGER	read-create	This object is used to enable/disable the loopback.
INT csAtmConnOamLoopbackManageVc	1.3.6.1.4.1.3085.3.1.3.5.2.1.37	INTEGER	read-write	This object is used to enable/disable the oam loopback manage vc.
I32 csAtmConnOamLoopbackRetryPvcDownAge	1.3.6.1.4.1.3085.3.1.3.5.2.1.36	Integer32	read-write	OAM Time to wait before transmitting OAM requests (in minutes)
I32 csAtmConnOamLoopbackRetryPvcDownCount	1.3.6.1.4.1.3085.3.1.3.5.2.1.34	Integer32	read-write	OAM retry count before declaring the PVC down.
I32 csAtmConnOamLoopbackRetryPvcDownRetryDelay	1.3.6.1.4.1.3085.3.1.3.5.2.1.35	Integer32	read-write	OAM retry Frequency in seconds (for down status).
I32 csAtmConnOamLoopbackRetryPvcUpAge	1.3.6.1.4.1.3085.3.1.3.5.2.1.33	Integer32	read-write	OAM Time to wait before transmitting OAM requests for UP status(in minutes)
I32 csAtmConnOamLoopbackRetryPvcUpCount	1.3.6.1.4.1.3085.3.1.3.5.2.1.31	Integer32	read-write	OAM retry count before declaring the PVC up.
I32 csAtmConnOamLoopbackRetryPvcUpRetryDelay	1.3.6.1.4.1.3085.3.1.3.5.2.1.32	Integer32	read-write	OAM retry Frequency in seconds.
INT csAtmConnOamLoopbackStatus	1.3.6.1.4.1.3085.3.1.3.5.2.1.38	INTEGER	read-only	The current loopback status of the connection.
C64 csAtmConnOamLoopBackTransmitFail	1.3.6.1.4.1.3085.3.1.3.5.9.1.21	Counter64	read-only	The counter indicates the number of OAM loop-back requests failed to transmit on ATM VC
OPE csAtmConnOperStatus	1.3.6.1.4.1.3085.3.1.3.5.2.1.19	OperStatus	read-only	The current operational status of the connection.
I32 csAtmConnPCR	1.3.6.1.4.1.3085.3.1.3.5.2.1.7	Integer32	read-create	Peak Cell rate for the connection.
INT csAtmConnPvcType	1.3.6.1.4.1.3085.3.1.3.5.2.1.6	INTEGER	read-create
C64 csAtmConnReceivedArpRequests	1.3.6.1.4.1.3085.3.1.3.5.9.1.24	Counter64	read-only	The counter indicates the number of received ARP requests on ATM VC
C64 csAtmConnReceivedArpResponses	1.3.6.1.4.1.3085.3.1.3.5.9.1.25	Counter64	read-only	The counter indicates the number of received ARP responses on ATM VC
C64 csAtmConnReceivedBadAalLength	1.3.6.1.4.1.3085.3.1.3.5.9.1.16	Counter64	read-only	The counter indicates the number of received packets dropped due to bad PDU length on Driver interface
C64 csAtmConnReceivedBadAalType	1.3.6.1.4.1.3085.3.1.3.5.9.1.15	Counter64	read-only	The counter indicates the number of received packets dropped due to unsupported AAL type on Driver interface
C64 csAtmConnReceivedBufferAllocationFail	1.3.6.1.4.1.3085.3.1.3.5.9.1.14	Counter64	read-only	The counter indicates the number of received packets dropped due to buffer allocation on Driver interface
C64 csAtmConnReceivedBytes	1.3.6.1.4.1.3085.3.1.3.5.9.1.8	Counter64	read-only	The counter indicates the number of bytes Received on ATM VC
C64 csAtmConnReceivedCells	1.3.6.1.4.1.3085.3.1.3.5.9.1.30	Counter64	read-only	The counter indicates the total number of cells received on ATM VC
C64 csAtmConnReceivedCRCErrors	1.3.6.1.4.1.3085.3.1.3.5.9.1.17	Counter64	read-only	The counter indicates the number of received packets dropped due to CRC errors on Driver interface
C64 csAtmConnReceivedDroppedPkts	1.3.6.1.4.1.3085.3.1.3.5.9.1.13	Counter64	read-only	The counter indicates the number of received packets dropped due to buffer allocation on Driver interface
C64 csAtmConnReceivedEncapsulationErrors	1.3.6.1.4.1.3085.3.1.3.5.9.1.9	Counter64	read-only	The counter indicates the number of packets dropped due to encapsulation errors in Receive path errors on ATM VC
C64 csAtmConnReceivedGenericErrors	1.3.6.1.4.1.3085.3.1.3.5.9.1.11	Counter64	read-only	The counter indicates the number of packets dropped due to Receive path generic errors on ATM VC. These errors includes, when protocol is none, or any other operations failed while accessing LLC/SNAP header
C64 csAtmConnReceivedOamLoopBackResponses	1.3.6.1.4.1.3085.3.1.3.5.9.1.19	Counter64	read-only	The counter indicates the number of OAM loop-back responses received on ATM VC
C64 csAtmConnReceivedOperationallyDown	1.3.6.1.4.1.3085.3.1.3.5.9.1.12	Counter64	read-only	The counter indicates the number of packets dropped in Receive path on ATM VC, because of inactivity
C64 csAtmConnReceivedPackets	1.3.6.1.4.1.3085.3.1.3.5.9.1.7	Counter64	read-only	The counter indicates the number of packets Received on ATM VC
C64 csAtmConnReceivedUnknownProtocolErrors	1.3.6.1.4.1.3085.3.1.3.5.9.1.10	Counter64	read-only	The counter indicates the number of packets dropped due to unknown protocol in r eceive path errors on ATM VC
C64 csAtmConnRespondedOAMLoopBackRequests	1.3.6.1.4.1.3085.3.1.3.5.9.1.20	Counter64	read-only	The counter indicates the number of responded OAM loop-back requests on driver interface
ROW csAtmConnRowStatus	1.3.6.1.4.1.3085.3.1.3.5.2.1.20	RowStatus	read-create	This object is used to create, delete or modify a row in this table.
I32 csAtmConnSCR	1.3.6.1.4.1.3085.3.1.3.5.2.1.8	Integer32	read-create	Sustain Cell rate for the connection. NOTE: This value is applicable for VBR service categories.
csAtmConnStaticArpCacheEntry	1.3.6.1.4.1.3085.3.1.3.5.4.1		not-accessible	This list contains Static (configured) ARP Entries for ATM virtual connections.
IP csAtmConnStaticArpCacheIpAddress	1.3.6.1.4.1.3085.3.1.3.5.4.1.1	IpAddress	not-accessible	This object holds IP address associated with MAC Address.
MAC csAtmConnStaticArpCacheMacAddress	1.3.6.1.4.1.3085.3.1.3.5.4.1.2	MacAddress	read-create	This object holds MAC address associated with IP Address.
ROW csAtmConnStaticArpCacheRowStatus	1.3.6.1.4.1.3085.3.1.3.5.4.1.3	RowStatus	read-create	This object is used to create, delete or modify a row in this table.
csAtmConnStaticArpCacheTable	1.3.6.1.4.1.3085.3.1.3.5.4		not-accessible
csAtmConnStatsEntry	1.3.6.1.4.1.3085.3.1.3.5.9.1		not-accessible	This list contains statistics entries for ATM interfaces.
csAtmConnStatsTable	1.3.6.1.4.1.3085.3.1.3.5.9		not-accessible
I32 csAtmConnStatsTableEnd	1.3.6.1.4.1.3085.3.1.3.5.10	Integer32	read-only	End of this group. value undefined
I32 csAtmConnSubIfIndex	1.3.6.1.4.1.3085.3.1.3.5.2.1.2	Integer32	not-accessible	The identifier for this ATM connection. This corresponds to the 'subinterface' entered via the CLI.
csAtmConnTable	1.3.6.1.4.1.3085.3.1.3.5.2		not-accessible	This table can be used to creata virtual connections in this ATM interface.
C64 csAtmConnTransmitBadLength	1.3.6.1.4.1.3085.3.1.3.5.9.1.6	Counter64	read-only	The counter indicates the number of packets dropped in transmit path due to bad length on driver interface
C64 csAtmConnTransmitDroppedPkts	1.3.6.1.4.1.3085.3.1.3.5.9.1.29	Counter64	read-only	The counter indicates the total number of packets (OAM/RAW/data) packets dropped or aborted on ATM VC
C64 csAtmConnTransmitErrors	1.3.6.1.4.1.3085.3.1.3.5.9.1.3	Counter64	read-only	The counter indicates the number of packets dropped due to transmit path errors on ATM VC
C64 csAtmConnTransmitOperationallyDown	1.3.6.1.4.1.3085.3.1.3.5.9.1.4	Counter64	read-only	The counter indicates the number of packets dropped in transmit path on ATM VC, because of inactivity
C64 csAtmConnTransmitQueueFull	1.3.6.1.4.1.3085.3.1.3.5.9.1.5	Counter64	read-only	The counter indicates the number of packets dropped due to transmit queue is full on driver interface
C64 csAtmConnTransmittedArpRequests	1.3.6.1.4.1.3085.3.1.3.5.9.1.22	Counter64	read-only	The counter indicates the number of transmitted ARP requests on ATM VC
C64 csAtmConnTransmittedArpResponses	1.3.6.1.4.1.3085.3.1.3.5.9.1.23	Counter64	read-only	The counter indicates the number of transmitted ARP responses on ATM VC
C64 csAtmConnTransmittedBytes	1.3.6.1.4.1.3085.3.1.3.5.9.1.2	Counter64	read-only	The counter indicates the number of bytes transmitted on ATM VC
C64 csAtmConnTransmittedCells	1.3.6.1.4.1.3085.3.1.3.5.9.1.28	Counter64	read-only	The counter indicates the total number of data cells transmitted on ATM VC
C64 csAtmConnTransmittedOamLoopBackRequests	1.3.6.1.4.1.3085.3.1.3.5.9.1.18	Counter64	read-only	The counter indicates the number of OAM loop-back requests transmitted on ATM VC
C64 csAtmConnTransmittedPackets	1.3.6.1.4.1.3085.3.1.3.5.9.1.1	Counter64	read-only	The counter indicates the number of packets transmitted on ATM VC
ATM csAtmConnType	1.3.6.1.4.1.3085.3.1.3.5.2.1.5	AtmServiceCategory	read-create	The ATM service category. NOTE : The type other(1) is not implemented for write operation. Setting to this type will default to ubr(6).
C64 csAtmConnUnRespondedArpRequests	1.3.6.1.4.1.3085.3.1.3.5.9.1.26	Counter64	read-only	The counter indicates the number of received ARP requests for which, no ARP responses send due to non-existing IP address on ATM VC
INT csAtmConnUpperProtocol	1.3.6.1.4.1.3085.3.1.3.5.2.1.21	INTEGER	read-create	This object is used to set the upper protocol. For PPP over ATM this is set to 'ppp'. For PPP over Ethernet this is set to 'pppoe'. NOTE: This object cannot be set to 'ip'. Only when a VI is connected to this interface that it becomes 'ip'.
OID csAtmConnVci	1.3.6.1.4.1.3085.3.1.3.5.2.1.4	AtmVcIdentifier	read-create	Virtual Channel ID of this connection. This is mandatory in creating a connection.
OID csAtmConnVpi	1.3.6.1.4.1.3085.3.1.3.5.2.1.3	AtmVpIdentifier	read-create	Virtual Path ID of this connection. This is mandatory in creating a connection.
csAtmInfo	1.3.6.1.4.1.3085.3.1.3.5
INT csAtmInterfaceConfAdminStatus	1.3.6.1.4.1.3085.3.1.3.5.1.1.20	INTEGER	read-write	The object used to enable/disable this ATM interface.
I32 csAtmInterfaceConfCurrentMaxVciBits	1.3.6.1.4.1.3085.3.1.3.5.1.1.11	Integer32	read-only	The maximum number of VCI Bits that may currently be used at this ATM interface. The value is the minimum of AtmInterfaceMaxActiveVciBits, and the AtmInterfaceMaxActiveVciBits of the interface's UNI/NNI peer. If the interface does not negotiate with its peer to determine the number of VCI Bits that can be used on the interface, then the value of this object must equal AtmInterfaceMaxActiveVciBits.
I32 csAtmInterfaceConfCurrentMaxVpiBits	1.3.6.1.4.1.3085.3.1.3.5.1.1.9	Integer32	read-only	The maximum number of VPI Bits that may currently be used at this ATM interface. The value is the minimum of AtmInterfaceMaxActiveVpiBits, and the AtmInterfaceMaxActiveVpiBits of the interface's UNI/NNI peer. If the interface does not negotiate with its peer to determine the number of VPI Bits that can be used on the interface, then the value of this object must equal AtmInterfaceMaxActiveVpiBits.
csAtmInterfaceConfEntry	1.3.6.1.4.1.3085.3.1.3.5.1.1		not-accessible	This list contains ATM interface configuration parameters and state variables.
EVL csAtmInterfaceConfEvLogArea	1.3.6.1.4.1.3085.3.1.3.5.1.1.25	EvLogArea	read-write	This object is used to set the area of event logs for ATM Port. This value will not be applied to VCCs. Events which area is not specified in this object will not be logged.
EVL csAtmInterfaceConfEvLogLevel	1.3.6.1.4.1.3085.3.1.3.5.1.1.24	EvLogLevel	read-write	This object is used to set the level for details for event logs for ATM port. This value will not be applied to VCCs. Events with level higher than this object will not be logged.
INT csAtmInterfaceConfIlmiControl	1.3.6.1.4.1.3085.3.1.3.5.1.1.22	INTEGER	read-write	The object is used to enable/disable the ILMI on this ATM interface.
INT csAtmInterfaceConfIlmiStatus	1.3.6.1.4.1.3085.3.1.3.5.1.1.23	INTEGER	read-only	The object is used to monitor the status of the ILMI on this ATM interface.
OID csAtmInterfaceConfIlmiVci	1.3.6.1.4.1.3085.3.1.3.5.1.1.13	AtmVcIdentifier	read-write	The VCI value of the VCC supporting the ILMI at this ATM interface. If the values of AtmInterfaceIlmiVpi and AtmInterfaceIlmiVci are both equal to zero then the ILMI is not supported at this ATM interface.
INT csAtmInterfaceConfIlmiVersion	1.3.6.1.4.1.3085.3.1.3.5.1.1.17	INTEGER	read-only	An indication of the latest version of the ATM Forum ILMI specification that is supported on this ATM interface. If the peer IME's value of this object is the same as, or later than the local IME's value, then the version corresponding to the local IME's value should be attempted. Otherwise, if the peer IME's value of this object is earlier, and supported locally, then the local IME should attempt the version corresponding to the peer IME's value. Otherwise, compatibility of the two IMEs cannot be assumed. If this object is not present, a version of the ILMI earlier than 4.0 is supported.
OID csAtmInterfaceConfIlmiVpi	1.3.6.1.4.1.3085.3.1.3.5.1.1.12	AtmVpIdentifier	read-write	The VPI value of the VCC supporting the ILMI at this ATM interface. If the values of AtmInterfaceIlmiVpi and AtmInterfaceIlmiVci are both equal to zero then the ILMI is not supported at this ATM interface.
I32 csAtmInterfaceConfMaxActiveVciBits	1.3.6.1.4.1.3085.3.1.3.5.1.1.10	Integer32	read-write	The maximum number of active VCI bits configured for use at this ATM interface.
I32 csAtmInterfaceConfMaxActiveVpiBits	1.3.6.1.4.1.3085.3.1.3.5.1.1.8	Integer32	read-write	The maximum number of active VPI bits configured for use at the ATM interface. At the ATM UNI, the maximum number of active VPI bits configured for use ranges from 0 to 8 only.
I32 csAtmInterfaceConfMaxVccs	1.3.6.1.4.1.3085.3.1.3.5.1.1.5	Integer32	read-write	The maximum number of VCCs (PVCCs and SVCCs) supported at this ATM interface.
I32 csAtmInterfaceConfMaxVpcs	1.3.6.1.4.1.3085.3.1.3.5.1.1.4	Integer32	read-write	The maximum number of VPCs (PVPCs and SVPCs) supported at this ATM interface. At the ATM UNI, the maximum number of VPCs (PVPCs and SVPCs) ranges from 0 to 256 only.
I32 csAtmInterfaceConfModuleIndex	1.3.6.1.4.1.3085.3.1.3.5.1.1.2	Integer32	not-accessible	This object identifies the module to which this ATM Port is attached.
STR csAtmInterfaceConfMyIfName	1.3.6.1.4.1.3085.3.1.3.5.1.1.14	DisplayString	read-write	A textual name of this interface. if this system is manageable through SNMP, and supports the object ifName, the value of this object must be identical with that of ifName for the ifEntry of the lowest level physical interface for this port. This interface must be uniquely named on this system to distinguish parallel links with a neighboring system. if this interface does not have a textual name, the value of this object is a zero length strin.
STR csAtmInterfaceConfMyNeighbourIfName	1.3.6.1.4.1.3085.3.1.3.5.1.1.16	DisplayString	read-write	The textual name of the interface on the neighbor system on the far end of this interface, and to which this interface connects. If the neighbor system is manageable through SNMP and supports the object ifName, the value of this object must be identical with that of ifName for the ifEntry of the lowest level physical interface for this port. If this interface does not have a textual name, the value of this object is a zero length string. Note that the value of this object may be obtained in different ways, e.g., by manual configuration, or through ILMI interaction with the neighbor system.
IP csAtmInterfaceConfMyNeighbourIpAddress	1.3.6.1.4.1.3085.3.1.3.5.1.1.15	IpAddress	read-write	The IP address of the neighbor system connected to the far end of this interface, to which a Network Management Station can send SNMP messages, as IP datagrams sent to UDP port 161, in order to access network management information concerning the operation of that system. Note that the value of this object may be obtained in different ways, e.g., by manual configuration, or through ILMI interaction with the neighbor system.
C64 csAtmInterfaceConfOamLoopBackTransmitFail	1.3.6.1.4.1.3085.3.1.3.5.7.1.26	Counter64	read-only	The counter indicates the number of OAM loop-back requests/responses failed to transmit on ATM/driver interface
OPE csAtmInterfaceConfOperStatus	1.3.6.1.4.1.3085.3.1.3.5.1.1.21	OperStatus	read-only	The operational status of this ATM interface.
I32 csAtmInterfaceConfPortIndex	1.3.6.1.4.1.3085.3.1.3.5.1.1.3	Integer32	not-accessible	This object identifies the blade to which this ATM Port is attached. Together with csAtmInterfaceConfSlotIndex, it uniquely identifies a physical port.
C64 csAtmInterfaceConfReceivedBadAalLength	1.3.6.1.4.1.3085.3.1.3.5.7.1.19	Counter64	read-only	The counter indicates the number of received packets dropped due to bad PDU length on Driver interface
C64 csAtmInterfaceConfReceivedBadAalType	1.3.6.1.4.1.3085.3.1.3.5.7.1.18	Counter64	read-only	The counter indicates the number of received packets dropped due to unsupported AAL type on Driver interface
C64 csAtmInterfaceConfReceivedBadVc	1.3.6.1.4.1.3085.3.1.3.5.7.1.17	Counter64	read-only	The counter indicates the number of received packets dropped due to non-existing VCs on Driver interface
C64 csAtmInterfaceConfReceivedBufferAllocationFail	1.3.6.1.4.1.3085.3.1.3.5.7.1.16	Counter64	read-only	The counter indicates the number of received packets dropped due to buffer allocation on Driver interface
C64 csAtmInterfaceConfReceivedBytes	1.3.6.1.4.1.3085.3.1.3.5.7.1.10	Counter64	read-only	The counter indicates the number of bytes Received on ATM interface
C64 csAtmInterfaceConfReceivedCRCErrors	1.3.6.1.4.1.3085.3.1.3.5.7.1.20	Counter64	read-only	The counter indicates the number of received packets dropped due to CRC errors on Driver interface
C64 csAtmInterfaceConfReceivedDroppedCells	1.3.6.1.4.1.3085.3.1.3.5.7.1.21	Counter64	read-only	The counter indicates the number of cells dropped on Driver interface
C64 csAtmInterfaceConfReceivedDroppedPkts	1.3.6.1.4.1.3085.3.1.3.5.7.1.15	Counter64	read-only	The counter indicates the number of received packets dropped due to buffer allocation on Driver interface
C64 csAtmInterfaceConfReceivedEncapsulationErrors	1.3.6.1.4.1.3085.3.1.3.5.7.1.11	Counter64	read-only	The counter indicates the number of packets dropped due to LLC/SNAP errors in Receive path on ATM interface
C64 csAtmInterfaceConfReceivedGenericErrors	1.3.6.1.4.1.3085.3.1.3.5.7.1.13	Counter64	read-only	The counter indicates the number of packets dropped due to Receive path errors on ATM interface
C64 csAtmInterfaceConfReceivedInvalidVpiVciCells	1.3.6.1.4.1.3085.3.1.3.5.7.1.22	Counter64	read-only	The counter indicates the number of received cells dropped due to invalid VPI/VCI values on Driver interface
C64 csAtmInterfaceConfReceivedOamLoopBackResponses	1.3.6.1.4.1.3085.3.1.3.5.7.1.24	Counter64	read-only	The counter indicates the number of OAM loop-back responses received on ATM interface
C64 csAtmInterfaceConfReceivedOperationallyDown	1.3.6.1.4.1.3085.3.1.3.5.7.1.14	Counter64	read-only	The counter indicates the number of packets dropped in Receive path on ATM interface, because of inactive PVCs
C64 csAtmInterfaceConfReceivedPackets	1.3.6.1.4.1.3085.3.1.3.5.7.1.9	Counter64	read-only	The counter indicates the number of packets Received on ATM interface
C64 csAtmInterfaceConfReceivedUnknownProtocolErrors	1.3.6.1.4.1.3085.3.1.3.5.7.1.12	Counter64	read-only	The counter indicates the number of packets dropped due to unknown protocols errors in Receive path on ATM interface
C64 csAtmInterfaceConfRespondedOAMLoopBackRequests	1.3.6.1.4.1.3085.3.1.3.5.7.1.25	Counter64	read-only	The counter indicates the number of responded OAM loop-back requests on driver interface
I32 csAtmInterfaceConfSlotIndex	1.3.6.1.4.1.3085.3.1.3.5.1.1.1	Integer32	not-accessible	This object identifies the blade to which this ATM Port is attached. Together with csAtmInterfaceConfModuleIndex, csAtmInterfaceConfPortIndex, it uniquely identifies a physical port.
csAtmInterfaceConfStatsEntry	1.3.6.1.4.1.3085.3.1.3.5.7.1		not-accessible	This list contains statistics entries for ATM interfaces.
csAtmInterfaceConfStatsTable	1.3.6.1.4.1.3085.3.1.3.5.7		not-accessible
I32 csAtmInterfaceConfStatsTableEnd	1.3.6.1.4.1.3085.3.1.3.5.8	Integer32	read-only	End of this group. value undefined
csAtmInterfaceConfTable	1.3.6.1.4.1.3085.3.1.3.5.1		not-accessible	This table contains ATM local interface configuration parameters, one entry per ATM interface port.
C64 csAtmInterfaceConfTransmitBadLength	1.3.6.1.4.1.3085.3.1.3.5.7.1.6	Counter64	read-only	The counter indicates the number of packets dropped in transmit path due to bad length on driver interface
C64 csAtmInterfaceConfTransmitCollisions	1.3.6.1.4.1.3085.3.1.3.5.7.1.27	Counter64	read-only	The counter indicates the number of packets (data and OAM) aborted due collisions at driver interface
C64 csAtmInterfaceConfTransmitErrors	1.3.6.1.4.1.3085.3.1.3.5.7.1.3	Counter64	read-only	The counter indicates the number of packets dropped due to transmit path errors on ATM interface caused by buffer operation failures, and invalid protocol types
C64 csAtmInterfaceConfTransmitIncomplete	1.3.6.1.4.1.3085.3.1.3.5.7.1.7	Counter64	read-only	The counter indicates the number of packets transmitted incompletely on driver interface
C64 csAtmInterfaceConfTransmitOperationallyDown	1.3.6.1.4.1.3085.3.1.3.5.7.1.4	Counter64	read-only	The counter indicates the number of packets dropped in transmit path on ATM interface, because of inactive PVCs
C64 csAtmInterfaceConfTransmitQueueFull	1.3.6.1.4.1.3085.3.1.3.5.7.1.5	Counter64	read-only	The counter indicates the number of packets dropped due to transmit queue is full on driver interface
C64 csAtmInterfaceConfTransmittedBytes	1.3.6.1.4.1.3085.3.1.3.5.7.1.2	Counter64	read-only	The counter indicates the number of bytes transmitted on ATM interface
C64 csAtmInterfaceConfTransmittedCells	1.3.6.1.4.1.3085.3.1.3.5.7.1.28	Counter64	read-only	The counter indicates the number of total number of cells transmitted on driver interface
C64 csAtmInterfaceConfTransmittedOamLoopBackRequests	1.3.6.1.4.1.3085.3.1.3.5.7.1.23	Counter64	read-only	The counter indicates the number of OAM loop-back requests transmitted on ATM interface
C64 csAtmInterfaceConfTransmittedPackets	1.3.6.1.4.1.3085.3.1.3.5.7.1.1	Counter64	read-only	The counter indicates the number of packets transmitted on ATM interface
C64 csAtmInterfaceConfTransmitVcNotOpened	1.3.6.1.4.1.3085.3.1.3.5.7.1.8	Counter64	read-only	The counter indicates the number of packets dropped in transmit path due to non-existing VCCs on driver interface
INT csAtmInterfaceConfUniType	1.3.6.1.4.1.3085.3.1.3.5.1.1.18	INTEGER	read-only	The type of the ATM device, either public or private.
INT csAtmInterfaceConfUniVersion	1.3.6.1.4.1.3085.3.1.3.5.1.1.19	INTEGER	read-only	An indication of the latest version of the ATM Forum UNI Signalling Specification that is supported on this ATM Interface. if this value is not present, a version of the UNI earlier than 3.1 is supported. If the peer IME's value of this object is the same as, or earlier than the local IME's value, then the version corresponding to the local IME's value should be attempted. Otherwise, if the peer IME's value of this object is earlier, and supported locally, then the local IME should attempt the version corresponding to the peer IME's value. Otherwise compatibility of the two IMEs cannot be assumed.
I32 csAtmInterfaceConfVccs	1.3.6.1.4.1.3085.3.1.3.5.1.1.7	Integer32	read-only	The number of VCCs (PVCC, Soft PVCC and SVCC) currently in use at this ATM interface. It includes the number of PVCCs and Soft PVCCs that are configured at the interface, plus the number of SVCCs that are currently established at the interface.
I32 csAtmInterfaceConfVpcs	1.3.6.1.4.1.3085.3.1.3.5.1.1.6	Integer32	read-only	The number of VPCs (PVPC, Soft PVPC and SVPC) currently in use at this ATM interface. It includes the number of PVPCs and Soft PVPCs that are configured at the interface, plus the number of SVPCs that are currently established at the interface. At the ATM UNI, the configured number of VPCs (PVPCs and SVPCs) can range from 0 to 256 only.
C64 csAtmInterfaceReceivedBadAAL5HdrTrailers	1.3.6.1.4.1.3085.3.1.3.5.7.1.29	Counter64	read-only	The counter indicates the number of packets (OAM & data) failed in reassemble path in ATM/driver interface due bad AAL5 trailer length
C64 csAtmInterfaceReceivedCells	1.3.6.1.4.1.3085.3.1.3.5.7.1.30	Counter64	read-only	The counter indicates the total number of received on open channels at ATM/driver interface
csBgpConf	1.3.6.1.4.1.3085.3.1.4.2.8.2
csBgpConfed	1.3.6.1.4.1.3085.3.1.4.2.8.2.4
I32 csBgpConfedAS	1.3.6.1.4.1.3085.3.1.4.2.8.2.4.1.1.1	Integer32	not-accessible	This attribute identifies the AS which belongs to the same confederation as this virtual router.
csBgpConfedASEntry	1.3.6.1.4.1.3085.3.1.4.2.8.2.4.1.1		not-accessible	Each entry contains as AS number which belongs to the same confederation as this virtual router.
ROW csBgpConfedASRowStatus	1.3.6.1.4.1.3085.3.1.4.2.8.2.4.1.1.2	RowStatus	read-create	The RowStatus object for this table. This is used to add & remove rows from this table.
csBgpConfedASTable	1.3.6.1.4.1.3085.3.1.4.2.8.2.4.1		not-accessible	This table maintains a list of AS's which belong to the same confederation as this virtual router.
I32 csBgpConfedASTableEnd	1.3.6.1.4.1.3085.3.1.4.2.8.2.4.2	Integer32	read-only	End of this group. value undefined
csBgpGen	1.3.6.1.4.1.3085.3.1.4.2.8.2.1
IP csBgpGenClearConn	1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.3	IpAddress	read-create	This object is used to clear one of the existing BGP connections. To clear a single connection, enter the ip address of the remote end of the connection. When this object is read (get, getnext), the value 0.0.0.0 will be returned.
INT csBgpGenClearConnFlag	1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.15	INTEGER	read-create	This object is used to indicate the set of BGP connections that need to be cleared. If set to 'nbr' the 'csBgpNbrClearConn' attribute must be set. If set to 'nbrGroup' the csBgpNbrClearNbrGroupName' must be set. When this object is read the value 'none' will be returned.
STR csBgpGenClearNbrGroupName	1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.16	DisplayString	read-create	This object is used to clear all the BGP connections that belong to the specified peer group.
I32 csBgpGenConfedId	1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.6	Integer32	read-create	The ConfedId of this system. -1 indicates no confedId has been configured.
INT csBgpGenDampEnable	1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.7	INTEGER	read-create	This attribute is used to enable/disable route flap damping on this virtual router.
I32 csBgpGenDampHalfLife	1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.8	Integer32	read-create	The time in seconds after which the penalty associated with a flapping route is reduced by one half. default value is 15 mintues.
I32 csBgpGenDampMaxSuppress	1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.11	Integer32	read-create	The maximum time that the route can be suppressed. Default is 16.
I32 csBgpGenDampReuse	1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.9	Integer32	read-create	If the penalty of a flapping route that has been suppressed falls below the value configured by this attribute, then the route is unsuppressed. Default is 2.
I32 csBgpGenDampSuppress	1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.10	Integer32	read-create	If the penalty of a flapping route exceeds the value configured by this atttribute, the route is suppressed. Default is 3.
I32 csBgpGenDefaultLocalPref	1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.5	Integer32	read-create	Default local preference of this BGP speaker default value is 100.
I32 csBgpGenDefaultMetric	1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.4	Integer32	read-create	The default metric used by the system. default value is -1 which indicates that the metric is not configured
csBgpGenEntry	1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1		not-accessible	Each entry contains general, virtual router specific BGP information for a single virtual router.
I32 csBgpGenHoldTimeConfigured	1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.17	Integer32	read-create	The configured holdtime to use with all the Neighbors. default value of -1 indicates that this attribute has not been configured (default value used will be 180 seconds). The timers configured for a Nbr or NbrGroup overrides timers configured for all BGP neighbors using this attribute
I32 csBgpGenKeepAliveConfigured	1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.18	Integer32	read-create	The configured Keepalive to use with all the Neighbors. default value of -1 indicates that this attribute has not been configured (default value used will be 60 seconds). The timers configured for a Nbr or NbrGroup overrides timers configured for all BGP neighbors using this attribute
I32 csBgpGenLocalAS	1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.2	Integer32	read-create	The local autonomous system number of this virtual router. This object will have a value of 0 if bgp is disabled. If bgp is enabled, this object cannot be set to 0.
U32 csBgpGenLogAreaFlag	1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.13	Unsigned32	read-create	Each bit within this object enables loggin for a specific area within BGP. Below is a list of the different areas available for logging within BGP and their corresponding bits identifiers. area bit ------------------------------------------------------ packet (all packets) 0 open (open packets) 1 update (update packets) 2 keepalive (keepalive packets) 3 notify (notify packets) 4 system (all system operations) 5 vpn-update (all vpn operations) 6 end of description.
U32 csBgpGenLogLevelFlag	1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.14	Unsigned32	read-create	Each bit within this object enables logging at a specific level for BGP. Below is a list of the different log levels available and their corresponding bits identifiers. area bit ------------------------------------------------------ critical 0 error 1 warning 2 information 3 debug 4 end of description.
I32 csBgpGenMaxPfx	1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.20	Integer32	read-create	This attribute limits the maximum number of BGP routes that can be learnt. Any additional routes learnt from BGP will be 1. discarded and a warning message is generated. or 2. accepted and a warning message is generated -1 indicates that no maximum threshold has been set
I32 csBgpGenMaxPfxThreshold	1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.21	Integer32	read-create	If this attribute is configured, then when the number of routes learnt from all BGP peer reaches this threshold (percentage of csBgpMaxPfx) then a warning message is generated.
INT csBgpGenMaxPfxType	1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.22	INTEGER	read-create	This attribute indicates the action that needs to be taken when the number of routes learnt from the bgp reaches the max prefix limit configured via 'csBgpGenMaxPfx' attribute. If this attribute is not set explicitly, and 'csBgpGenMaxPfx' attribute is set, this attribute defaults to warning-and-discard.
ROW csBgpGenRowStatus	1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.12	RowStatus	read-create	The RowStatus object for this table. This is used to add & remove rows from this table.
INT csBgpGenStatus	1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.1	INTEGER	read-create	This object controls the operation of BGP as a whole on this virtual router.
csBgpGenTable	1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1		not-accessible	This table contains general, virtual router specific, BGP information.
I32 csBgpGenTableEnd	1.3.6.1.4.1.3085.3.1.4.2.8.2.1.2	Integer32	read-only	End of this group. value undefined
U32 csBgpGenVpnLogAreaFlag	1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.19	Unsigned32	read-create	Each bit within this object enables logging for a specific area within BGP/VPN module. area bit ------------------------------------------------------ inbound-routes (updates recv) 0 outbound-routes (updates sent) 1 system (all system operations) 2 vrf (BGP to VRF interface) 3 bgp-peer (BGP/VPN peer mmgt) 4 tunnel (PE-PE tunnel mmgt) 5 end of description.
csBgpNbr	1.3.6.1.4.1.3085.3.1.4.2.8.2.2
IP csBgpNbrAddr	1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.1	IpAddress	not-accessible	The remote IP address of this entry's BGP neighbor.
INT csBgpNbrAdminStatus	1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.4	INTEGER	read-create	The desired state of the BGP connection. A transition from 'stop' to 'start' will cause the BGP Start Event to be generated. A transition from 'start' to 'stop' will cause the BGP Stop Event to be generated. This parameter can be used to restart BGP peer connections.
csBgpNbrEntry	1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1		not-accessible	Each entry contains information about a single neighbor on a single virtual router.
csBgpNbrExpPolEntry	1.3.6.1.4.1.3085.3.1.4.2.8.2.2.3.1		not-accessible	Each entry contains information about a single policy applied to a single virtual router's BGP neighbor.
I32 csBgpNbrExpPolId	1.3.6.1.4.1.3085.3.1.4.2.8.2.2.3.1.1	Integer32	not-accessible	The identifier of the policy to apply to this neighbor. This identifies an entry in either the csBgpExpExpPolTable or the csBgpExpExpPolTable. If the Nbr belongs to a NbrGroup then any Export policies configured to this Nbr are ignored.i.e. Export policies defined at the group level takes precedence
ROW csBgpNbrExpPolRowStatus	1.3.6.1.4.1.3085.3.1.4.2.8.2.2.3.1.2	RowStatus	read-create	The RowStatus object for this table. This is used to add & remove rows from this table.
csBgpNbrExpPolTable	1.3.6.1.4.1.3085.3.1.4.2.8.2.2.3		not-accessible	This table is used to configure the import policies applied to each BGP neighbor on each virtual router.
csBgpNbrGroup	1.3.6.1.4.1.3085.3.1.4.2.8.2.6
INT csBgpNbrGroupAdminStatus	1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.2	INTEGER	read-create	The desired state of the BGP connection. A transition from 'stop' to 'start' will cause the BGP Start Event to be generated. A transition from 'start' to 'stop' will cause the BGP Stop Event to be generated. This parameter can be used to restart BGP peer connections in the bgp group.
csBgpNbrGroupEntry	1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1		not-accessible	Each entry contains information about a single group on a single virtual router.
csBgpNbrGroupExpPolEntry	1.3.6.1.4.1.3085.3.1.4.2.8.2.6.3.1		not-accessible	Each entry contains information about a single policy applied to a single virtual router's BGP Group.
I32 csBgpNbrGroupExpPolId	1.3.6.1.4.1.3085.3.1.4.2.8.2.6.3.1.1	Integer32	not-accessible	The identifier of the policy to apply to this group. This identifies an entry in either the csBgpExpExpPolTable or the csBgpExpExpPolTable. If the export policies are defined at the group level, all the neighbors in the group will inherit these export policies, even if export policies are defined at the Nbr level.
ROW csBgpNbrGroupExpPolRowStatus	1.3.6.1.4.1.3085.3.1.4.2.8.2.6.3.1.2	RowStatus	read-create	The RowStatus object for this table. This is used to add & remove rows from this table.
csBgpNbrGroupExpPolTable	1.3.6.1.4.1.3085.3.1.4.2.8.2.6.3		not-accessible	This table is used to configure the export policies applied to each BGP Group on each virtual router.
I32 csBgpNbrGroupHoldTimeConfigured	1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.6	Integer32	read-create	The configured holdtime to be used by the neighbors in this group. default value is -1 which indicates this is not configured and the neighbors in the group will be use a value of 180 seconds. This attribute can be over-ridden for each Nbr in the group by setting the csBgpNbrHoldTimeConfigured attribute.
csBgpNbrGroupImpPolEntry	1.3.6.1.4.1.3085.3.1.4.2.8.2.6.2.1		not-accessible	Each entry contains information about a single policy applied to a single virtual router's BGP Group.
I32 csBgpNbrGroupImpPolId	1.3.6.1.4.1.3085.3.1.4.2.8.2.6.2.1.1	Integer32	not-accessible	The identifier of the policy to apply to this group. This identifies an entry in either the csBgpImpImpPolTable or the csBgpExpImpPolTable. The import polices defined at the group level can be over-ridden for each Nbr in the group by accessing the csBgpNbrImpPolTable.
ROW csBgpNbrGroupImpPolRowStatus	1.3.6.1.4.1.3085.3.1.4.2.8.2.6.2.1.2	RowStatus	read-create	The RowStatus object for this table. This is used to add & remove rows from this table.
csBgpNbrGroupImpPolTable	1.3.6.1.4.1.3085.3.1.4.2.8.2.6.2		not-accessible	This table is used to configure the import policies applied to each BGP Group on each virtual router.
INT csBgpNbrGroupIpv4AdminStatus	1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.11	INTEGER	read-create	If this attribute is set to disable then this BGP speaker will not try to send/recieve routes for IPv4 address family. The BGP speaker will participate in IPv4 address family with its peer only if this attribute is set to enable.
I32 csBgpNbrGroupKeepAliveConfigured	1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.15	Integer32	read-create	The configured keepalive to be used by the neighbors in this group. default value is -1 which indicates this is not configured and the neighbors in the group will be use a value of 60 seconds. This attribute can be over-ridden for each Nbr in the group by setting the csBgpNbrKeepAliveConfigured attribute. be 180 seconds). KeepAlive timer is normally derived from the negotiated holdtime and is 1/3 the value of negotiated holdtime. However if keepalive is configured the minmum of this value and 1/3 the value of negotiated holdtime is used.
IP csBgpNbrGroupLocalAddr	1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.7	IpAddress	read-create	The IpAddress to be used at the local end of the connection with the bgp peers in this group. If the LocalAddr is set to 0.0.0.0, it indicates that the LocalAddr is not configured.
U32 csBgpNbrGroupLogAreaFlag	1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.17	Unsigned32	read-create	Each bit within this object enables loggin for a specific area within BGP Neighbor. Below is a list of the different areas available for logging within BGP and their corresponding bits identifier. If the group level value is not set bgp global level value is inherited. area bit ------------------------------------------------------ packet (all packets) 0 open (open packets) 1 update (update packets) 2 keepalive (keepalive packets) 3 notify (notify packets) 4 system (all system operations) 5 end of description.
I32 csBgpNbrGroupMaxPfx	1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.18	Integer32	read-create	This attribute is used to set the maximum number of prefixes that can be learnt from each neighbor in this group. If a neighbor advertises more than this number set in this attribute, then that neighbor connection is closed and the state is set to Idle. Connection is not restored until user does a clearConnection. The group level value can be over-ridden for each nbr by setting the csBgpNbrMaxPfx attribute
I32 csBgpNbrGroupMaxPfxThreshold	1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.20	Integer32	read-create	If this attribute is configured, then when the number of routes learnt from the peers in this group reaches this threshold (percentage of csBgpNbrGroupMaxPfx) then a warning message is generated.
INT csBgpNbrGroupMaxPfxType	1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.21	INTEGER	read-create	This attribute indicates the action that needs to be taken when the number of routes learnt from the peers in this group reaches the max prefix limit configured via 'csBgpNbrGroupMaxPfx' attribute. If this attribute is not set explicitly, and 'csBgpNbrGroupMaxPfx' attribute is set, this attribute defaults to shutdown.
OCT csBgpNbrGroupMd5Password	1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.4	OCTET STRING	read-create	The Md5 password used to authenticate messages exchanged with the neighbors defined in the group. This attribute can be over-ridden for each Nbr in the group by setting the csBgpNbrMd5Password Attribute
IP csBgpNbrGroupMhopGw	1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.9	IpAddress	read-create	To specify the gateway address if the ebgp neighbors belonging to this group are not directly connected to this system. If the MhopGw is set to 0.0.0.0, it indicates that the MhopGw is not configured. This attribute can be over-ridden for each Nbr in the group by setting the csBgpNbrMhopGw attribute.
INT csBgpNbrGroupMhopTTL	1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.10	INTEGER	read-create	To specify the maximum TTL value for the TTL in the IP Header for BGP packets. This attribute is applicable only for ebgp sessions. This attribute deprecates csBgpNbrGroupMhopGw attribute. If this attribute is configured to an IBGP peer it has not effect. This attribute can be over-ridden for each Nbr in the group by setting the csBgpNbrMhopTTL attribute
STR csBgpNbrGroupName	1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.1	DisplayString	not-accessible	The Name of the BGP Group
INT csBgpNbrGroupNextHopSelf	1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.8	INTEGER	read-create	To enable/disable this system to be the next hopself for an ebgp session with the bgp peers in this group. default is -1 which indicates not configured and disabled. This attribute can be over-ridden for each Nbr in the group by setting the csBgpNbrNextHopSelf attribute.
STR csBgpNbrGroupNm	1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.8	DisplayString	read-create	The Group to which the peer belongs. If the peer is not configured to any group an empty string is returned.
INT csBgpNbrGroupRemoteAS	1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.3	INTEGER	read-create	The remote autonomous system number of the group.
INT csBgpNbrGroupRemovePrivateAs	1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.16	INTEGER	read-create	This attribute is used to strip private as numbers from the aspath advertised to the neighbor. This attribute is used only with EBGP neighbors. Configuring this attribute to an IBGP peer has no effect. default is -1 which indicates not configured and disabled. This attribute can be over-ridden for each Nbr in the group by setting the csBgpNbrNextHopSelf attribute.
ROW csBgpNbrGroupRowStatus	1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.5	RowStatus	read-create	The RowStatus object for this table. This is used to add & remove rows from this table.
csBgpNbrGroupTable	1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1		not-accessible	This table contains information about the BGP Group's on a single virtual router.
INT csBgpNbrGroupVpnIpv4AdminStatus	1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.12	INTEGER	read-create	If this attribute is set to disable then this BGP speaker will not try to send/recieve routes for VPN IPv4 address family. The BGP speaker will participate in VPN IPv4 address family with its peer only if this attribute is set to enable.
INT csBgpNbrGroupVpnIpv4AllowRfc2547Customers	1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.13	INTEGER	read-create	This attribute specifies the scope of RFC2547bis customers provisioned by this BGP speaker. none : no rfc2547 customers all : all VRs which are requesting to participate other: access controlled by specifying explicit list of customers by name or group-names in csBgpVpnv4AccessMapTable.
INT csBgpNbrGroupVpnIpv4AllowVrmodelCustomers	1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.14	INTEGER	read-create	This attribute specifies the scope of VR-model customers provisioned by this BGP speaker. none : no VR-model customers all : all VRs which are requesting to participate other: access controlled by specifying explicit list of customers by name or group-names in csBgpVpnv4AccessMapTable.
U32 csBgpNbrGroupVpnLogAreaFlag	1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.19	Unsigned32	read-create	Each bit within this object enables loggin for a specific area within BGP Neighbor related to VPN routing. If the group level value is not set bgp global level value is inherited. area bit ------------------------------------------------------ inbound-routes (updates recv) 0 outbound-routes (updates sent) 1 end of description.
I32 csBgpNbrHoldTimeConfigured	1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.9	Integer32	read-create	The configured holdtime to use with this Neighbor default value of -1 indicates that this attribute has not been configured (default value used will be 180 seconds). If the neighbor belongs to a NbrGroup and this attribute is not set, the Nbr inherits the group level value of this attribute.
IP csBgpNbrId	1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.2	IpAddress	read-only	The BGP Identifier of this entry's BGP neighbor.
csBgpNbrImpPolEntry	1.3.6.1.4.1.3085.3.1.4.2.8.2.2.2.1		not-accessible	Each entry contains information about a single policy applied to a single virtual router's BGP neighbor.
I32 csBgpNbrImpPolId	1.3.6.1.4.1.3085.3.1.4.2.8.2.2.2.1.1	Integer32	not-accessible	The identifier of the policy to apply to this neighbor. This identifies an entry in either the csBgpImpImpPolTable or the csBgpExpImpPolTable. If the Nbr belongs to a Group any import policies defined at the neighbor level overrides group level import policies. If no import policies are defined at the neighbor level group level policies are inherited.
ROW csBgpNbrImpPolRowStatus	1.3.6.1.4.1.3085.3.1.4.2.8.2.2.2.1.2	RowStatus	read-create	The RowStatus object for this table. This is used to add & remove rows from this table.
csBgpNbrImpPolTable	1.3.6.1.4.1.3085.3.1.4.2.8.2.2.2		not-accessible	This table is used to configure the import policies applied to each BGP neighbor on each virtual router.
INT csBgpNbrIpv4AdminStatus	1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.15	INTEGER	read-create	If this attribute is set to disable then this BGP speaker will not try to send/recieve routes for IPv4 address family. The BGP speaker will participate in IPv4 address family with its peer only if this attribute is set to enable.
I32 csBgpNbrKeepAliveConfigured	1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.17	Integer32	read-create	The configured keepalive to use with this Neighbor default value of -1 indicates that this attribute has not been configured (default value used will be 60 seconds). KeepAlive timer is normally derived from the negotiated holdtime and is 1/3 the value of negotiated holdtime. However if keepalive is configured the minmum of this value and 1/3 the value of negotiated holdtime is used. If the neighbor belongs to a NbrGroup and this attribute is not set, the Nbr inherits the group level value of this attribute.
IP csBgpNbrLocalAddr	1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.10	IpAddress	read-create	The IpAddress to be used at the local end of the connection with the bgp peer. If set to 0.0.0.0 it indicates that the LocalAddr is not configured. If the Nbr belongs to a NbrGroup, group level value of this attribute will override any value configured here.
U32 csBgpNbrLogAreaFlag	1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.19	Unsigned32	read-create	Each bit within this object enables loggin for a specific area within BGP Neighbor. Below is a list of the different areas available for logging within BGP and their corresponding bits identifier. If the neighbor belongs to a NbrGroup and this attribute is not set, the Nbr inherits the group level value of this attribute. If the group level value is not set (or the neighbor does not belong to a NbrGroup) bgp global level value is inherited. area bit ------------------------------------------------------ packet (all packets) 0 open (open packets) 1 update (update packets) 2 keepalive (keepalive packets) 3 notify (notify packets) 4 system (all system operations) 5 end of description.
I32 csBgpNbrMaxPfx	1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.20	Integer32	read-create	This attribute is used to set the maximum number of prefixes that can be learnt from this neighbor. If the neighbor advertises more than this number set in this attribute, the neighbor connection is closed and the state is set to Idle. Connection is not restored until user does a clearConnection. If this attribute is not set, the Nbr inherits the group level value of this attribute
I32 csBgpNbrMaxPfxThreshold	1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.22	Integer32	read-create	If this attribute is configured, then when the number of routes learnt from this peer reaches this threshold (percentage of csBgpNbrMaxPfx) then a warning message is generated.
INT csBgpNbrMaxPfxType	1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.23	INTEGER	read-create	This attribute indicates the action that needs to be taken when the number of routes learnt from the neighbor reaches the max prefix limit configured via 'csBgpNbrMaxPfx' attribute. If this attribute is not set explicitly, and 'csBgpNbrMaxPfx' attribute is set, this attribute defaults to shutdown.
OCT csBgpNbrMd5Password	1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.6	OCTET STRING	read-create	The Md5 password used to authenticate messages exchanged with this neighbor. If the neighbor belongs to a NbrGroup and this attribute is not configured, the Nbr inherits the group level value of this attribute.
IP csBgpNbrMhopGw	1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.12	IpAddress	read-create	To specify the gateway address if this ebgp neighbor is not directly connected to this system. If the MhopGw is set to 0.0.0.0, it indicates that the MhopGw is not configured. If the Nbr belongs to a NbrGroup and this attribute is not set, the Nbr inherits the group level value of this attribute.
INT csBgpNbrMhopTTL	1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.14	INTEGER	read-create	To specify the maximum TTL value for the TTL in the IP Header for BGP packets. This attribute is applicable only for ebgp sessions. This attribute deprecates csBgpNbrMhopGw attribute. If this attribute is configured for a IBGP peer it has no effect. If the Nbr belongs to a NbrGroup and this attribute is not set, the Nbr inherits the group level value of this attribute
INT csBgpNbrNextHopSelf	1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.11	INTEGER	read-create	To enable/disable this system to be the next hopself for an ebgp session with this peer. default is -1 which indicates not configured. If the neighbor belongs to a NbrGroup and this attribute is not set, the Nbr inherits the group level value of this attribute.
INT csBgpNbrPassive	1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.13	INTEGER	read-create	If this attribute is set to enable then this BGP speaker will not try to open a connection with the neighbor. Instead it will wait for the neighbor to initiate a connection.
INT csBgpNbrRemoteAS	1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.5	INTEGER	read-create	The remote autonomous system number.
INT csBgpNbrRemovePrivateAs	1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.18	INTEGER	read-create	This attribute is used to strip private as numbers from the aspath advertised to the neighbor. This attribute is used only with EBGP neighbors. Configuring this attribute to an IBGP peer has no effect. default is -1 which indicates not configured. If the neighbor belongs to a NbrGroup and this attribute is not set, the Nbr inherits the group level value of this attribute.
ROW csBgpNbrRowStatus	1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.7	RowStatus	read-create	The RowStatus object for this table. This is used to add & remove rows from this table.
INT csBgpNbrState	1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.3	INTEGER	read-only	The BGP Peer connection state.
csBgpNbrTable	1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1		not-accessible	This table contains information about the BGP Neighbors on each virtual router.
INT csBgpNbrVpnIpv4AdminStatus	1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.16	INTEGER	read-create	If this attribute is set to disable then this BGP speaker will not try to send/recieve routes for VPN IPv4 address family. The BGP speaker will participate in VPN IPv4 address family with its peer only if this attribute is set to enable.
U32 csBgpNbrVpnLogAreaFlag	1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.21	Unsigned32	read-create	Each bit within this object enables loggin for a specific area within BGP Neighbor related VPN routing. If the neighbor belongs to a NbrGroup and this attribute is not set, the Nbr inherits the group level value of this attribute. If the group level value is not set (or the neighbor does not belong to a NbrGroup) bgp global level value is inherited. area bit ------------------------------------------------------ inbound-routes (updates recv) 0 outbound-routes (updates sent) 1 end of description.
csBgpNetwork	1.3.6.1.4.1.3085.3.1.4.2.8.2.5
IP csBgpNetworkAddr	1.3.6.1.4.1.3085.3.1.4.2.8.2.5.1.1.1	IpAddress	not-accessible	The IP Address that needs to be redistrubted to BGP.
csBgpNetworkEntry	1.3.6.1.4.1.3085.3.1.4.2.8.2.5.1.1		not-accessible	Each entry contains an IP Address/Mask that need to be sent via BGP.
IP csBgpNetworkMask	1.3.6.1.4.1.3085.3.1.4.2.8.2.5.1.1.2	IpAddress	not-accessible	The IP Mask of the csBgpNetworkAddr that needs to be redistrubted to BGP.
ROW csBgpNetworkRowStatus	1.3.6.1.4.1.3085.3.1.4.2.8.2.5.1.1.3	RowStatus	read-create	The RowStatus object for this table. This is used to add & remove rows from this table.
csBgpNetworkTable	1.3.6.1.4.1.3085.3.1.4.2.8.2.5.1		not-accessible	This table maintains a list of IP Address/Mask which can be distributed from IGP into BGP.
I32 csBgpNetworkTableEnd	1.3.6.1.4.1.3085.3.1.4.2.8.2.5.2	Integer32	read-only	End of this group. value undefined
csBgpPol	1.3.6.1.4.1.3085.3.1.4.2.8.2.3
csBgpStats	1.3.6.1.4.1.3085.3.1.4.2.8.1
I32 csChDs3ChNumber	1.3.6.1.4.1.3085.3.1.3.2.3.1.4	Integer32	not-accessible	The channel number for this entry.
INT csChDs3Encap	1.3.6.1.4.1.3085.3.1.3.2.3.1.8	INTEGER	read-create	This object specifies the encapsulation used on this DS3 channel. If the encapsulation type is frameRelay(2), use the csFrameRelayTable to configure the Frame Relay specific parameters.
csChDs3Entry	1.3.6.1.4.1.3085.3.1.3.2.3.1		not-accessible	An entry in the DS3 Fractional table.
I32 csChDs3ModuleIndex	1.3.6.1.4.1.3085.3.1.3.2.3.1.2	Integer32	not-accessible	This object identifies the module of the Ds3 Blade
OPE csChDs3OperStatus	1.3.6.1.4.1.3085.3.1.3.2.3.1.10	OperStatus	read-only	A operational status for this Channel.
I32 csChDs3PortIndex	1.3.6.1.4.1.3085.3.1.3.2.3.1.3	Integer32	not-accessible	This object identifies the location of the Ds3 Port on the blade identified by csChDs3SlotIndex. Together with csChDs3SlotIndex, it uniquely identifies a physical port.
ROW csChDs3RowStatus	1.3.6.1.4.1.3085.3.1.3.2.3.1.9	RowStatus	read-create	A row status type for this Channel.
I32 csChDs3SlotIndex	1.3.6.1.4.1.3085.3.1.3.2.3.1.1	Integer32	not-accessible	This object identifies the blade to which this Ds3 Port is attached. Together with csChDs3ModuleIndex, csChDs3PortIndex, it uniquely identifies a physical port.
INT csChDs3Speed	1.3.6.1.4.1.3085.3.1.3.2.3.1.7	INTEGER	read-create	This object specifies the speed (and, hence the signaling mode) of the DS1 assigned to this channel.
I32 csChDs3T1Number	1.3.6.1.4.1.3085.3.1.3.2.3.1.5	Integer32	read-create	This object identifies the DS1 number that is assigned to this channel. This number for E1 is 1 to 16. NOTE: This object can only be set during row creation. Once the row is created, this object cannot be modified.
csChDs3Table	1.3.6.1.4.1.3085.3.1.3.2.3		not-accessible	The Channelized DS3 Channel configuration table.
STR csChDs3TimeSlots	1.3.6.1.4.1.3085.3.1.3.2.3.1.6	DisplayString	read-create	This object specifies the individual DS0 time slots within the DS1(T1 or E1, identified by csChDs3T1Number) that are assigned to this channel. The format can be a range of slots (1-8), a list of slots (1, 3, 7), or a mix of both. NOTE: This object can only be set during row creation. Once the row is created, this object cannot be modified.
csDnsServer	1.3.6.1.4.1.3085.3.1.4.4.2
MAC csDot1dBaseBridgeAddress	1.3.6.1.4.1.3085.3.1.4.2.2.5.1.1	MacAddress	read-only	The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong to this. However it is only required to be unique. When concatenated with dot1dStpPriority a unique BridgeIdentifier is formed which is used in the Spanning Tree Protocol. Note: This is used as the MAC address for this VB.
csDot1dBaseBridgeEntry	1.3.6.1.4.1.3085.3.1.4.2.2.5.1		not-accessible	An entry containing information applicable to a bridged VI of a VR.
ROW csDot1dBaseBridgeEntryRowStatus	1.3.6.1.4.1.3085.3.1.4.2.2.5.1.5	RowStatus	read-create	A row status type for the csDot1dBaseBridge Table.
csDot1dBaseBridgeTable	1.3.6.1.4.1.3085.3.1.4.2.2.5		not-accessible	A list of Virtual Bridges, configured for the Virtual Router.
INT csDot1dBaseNumPorts	1.3.6.1.4.1.3085.3.1.4.2.2.5.1.2	INTEGER	read-only	The number of ports controlled by this bridging entity.
csDot1dPortEntry	1.3.6.1.4.1.3085.3.1.4.2.2.7.1		not-accessible	Information about a specific unicast MAC address for which the bridge has some forwarding and (or) filtering information.
ROW csDot1dPortEntryRowStatus	1.3.6.1.4.1.3085.3.1.4.2.2.7.1.5	RowStatus	read-create	.
INT csDot1dPortIndex	1.3.6.1.4.1.3085.3.1.4.2.2.7.1.1	INTEGER	not-accessible	.
STR csDot1dPortRemoteEnd	1.3.6.1.4.1.3085.3.1.4.2.2.7.1.2	DisplayString	read-create	This object is used to identify the entity to which this Virtual Interface maps. That is, the remote end of this Virtual Interface. The format used for this ascii-string valued object is as follows: 'V\|L\|P\|T VPNID\|SlotID/VRID\|PortID/VIID/ConnID/TLSID\|LLID' Where 'V' indicates the other end of this Virtual Interface is another Virtual Interface. 'L' indicates this Virtual Interface maps to a Logical Link. P indicates pseudo wire. T indicates TLS. 'VPNID' is a Virtual Private Network ID. 'SlotID' identifies a specific slot on the Orion Box. 'VRID' is a Virtual Router ID for the VPN specified by VPNID. 'PortID' identifies a specific Port on the blade installed in the previously identified slot. 'VIID' is a Virtual Interface on the VR identified by VRID. ConnID refers to pseudo wire connection ID. TLSID refers to the TLS domain ID for pseudo wires. 'LLID' is a Logical Link ID on PortID. For example, if this Virtual Interface maps to another Virtual Interface (VI number 1 on VR 1.2.3.4 on VPN 4), this object might be set to this value: 'V 4/1.2.3.4/1' If this Virtual Interface maps to Logical Link 100 on Port 2 of Slot 2, this object might be set to this value: 'L 2/2:100' If this Virtual Interface maps to pseudo wire 100 on VPN 4 VR 1.2.3.4: P 4/1.2.3.4/100 If this Virtual Interface maps to TLS 100 on VPN 4 VR 1.2.3.4: T 4/1.2.3.4/100
INT csDot1dPortStatus	1.3.6.1.4.1.3085.3.1.4.2.2.7.1.4	INTEGER	read-only	.
csDot1dPortTable	1.3.6.1.4.1.3085.3.1.4.2.2.7		not-accessible	.
INT csDot1dPortType	1.3.6.1.4.1.3085.3.1.4.2.2.7.1.3	INTEGER	read-create	.
INT csDot1dTpAgingTime	1.3.6.1.4.1.3085.3.1.4.2.2.5.1.4	INTEGER	read-write	The timeout period in seconds for aging out dynamically learned forwarding information. 802.1D-1990 recommends a default of 300 seconds.
MAC csDot1dTpFdbAddress	1.3.6.1.4.1.3085.3.1.4.2.2.6.1.1	MacAddress	read-only	A unicast MAC address for which the bridge has forwarding and/or filtering information.
csDot1dTpFdbEntry	1.3.6.1.4.1.3085.3.1.4.2.2.6.1		not-accessible	Information about a specific unicast MAC address for which the bridge has some forwarding and/or filtering information.
INT csDot1dTpFdbPort	1.3.6.1.4.1.3085.3.1.4.2.2.6.1.2	INTEGER	read-only	Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of dot1dTpFdbAddress has been seen. A value of '0' indicates that the port number has not been learned but that the bridge does have some forwarding/filtering information about this address (e.g. in the dot1dStaticTable). Implementors are encouraged to assign the port to this object whenever it is learned even addresses for which the corresponding value of dot1dTpFdbStatus is not learned(3).
INT csDot1dTpFdbStatus	1.3.6.1.4.1.3085.3.1.4.2.2.6.1.4	INTEGER	read-only	The status of this entry. The meanings of the values are: other(1) : none of the following. This would include the case where some other MIB object (not the corresponding instance of dot1dTpFdbPort, nor an entry in the dot1dStaticTable) is being used to determine if and how frames addressed to the value of the corresponding instance of dot1dTpFdbAddress are being forwarded. invalid(2) : this entry is not longer valid (e.g., it was learned but has since aged-out), but has not yet been flushed from the table. learned(3) : the value of the corresponding instance of dot1dTpFdbPort was learned, and is being used. self(4) : the value of the corresponding instance of dot1dTpFdbAddress one of the bridge's addresses. The corresponding instance of dot1dTpFdbPort indicates which of the bridge's ports has this address. mgmt(5) : the value of the corresponding instance of dot1dTpFdbAddress is also the value of an existing instance of dot1dStaticAddress.
INT csDot1dTpFdbSubPort	1.3.6.1.4.1.3085.3.1.4.2.2.6.1.3	INTEGER	read-only	Either the value '0', or the port number of the subport on which a frame having a source address equal to the value of the corresponding instance of dot1dTpFdbAddress has been seen.
csDot1dTpFdbTable	1.3.6.1.4.1.3085.3.1.4.2.2.6		not-accessible	A table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame.
C32 csDot1dTpLearnedEntryDiscards	1.3.6.1.4.1.3085.3.1.4.2.2.5.1.3	Counter32	read-only	The total number of Forwarding Database entries, which have been or would have been learnt, but have been discarded due to a lack of space to store them in the Forwarding Database. If this counter is increasing, it indicates that the Forwarding Database is regularly becoming full (a condition which has unpleasant performance effects on the subnetwork). If this counter has a significant value but is not presently increasing, it indicates that the problem has been occurring but is not persistent.
INT csDs3ConfigAdminStatus	1.3.6.1.4.1.3085.3.1.3.2.1.1.17	INTEGER	read-write	This object is used to enable/disable this Ds3 port.
I32 csDs3ConfigCableLength	1.3.6.1.4.1.3085.3.1.3.2.1.1.4	Integer32	read-write	The length of the DS3 cable. NOTE: This is applicable only for DS3.
INT csDs3ConfigClockSource	1.3.6.1.4.1.3085.3.1.3.2.1.1.19	INTEGER	read-write	This object specifies the source of the Transmit Clock used on this (unchannelized) DS3. If this object is set to internal(1), a local clock source is used. If this object is set to line(2), the recovered received clock is used as the transmit clock. NOTE: This is applicable only for DS3.
INT csDs3ConfigDeviceType	1.3.6.1.4.1.3085.3.1.3.2.1.1.20	INTEGER	read-only	This object indicates whether the interface is DS3 or E3.
csDs3ConfigEntry	1.3.6.1.4.1.3085.3.1.3.2.1.1		not-accessible	An entry in the DS3 Configuration table.
INT csDs3ConfigFraming	1.3.6.1.4.1.3085.3.1.3.2.1.1.5	INTEGER	read-write	The framing format used on this Ds3 Interface. The default value is cbit if the interface is DS3. If the interface is E3, e3Framed will be used, and cannot be configured to any other types.
INT csDs3ConfigInvalidInterval	1.3.6.1.4.1.3085.3.1.3.2.1.1.27	INTEGER	read-only	The number of intervals in the range from 0 to csDs3ConfigValidInterval for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).
INT csDs3ConfigLineCoding	1.3.6.1.4.1.3085.3.1.3.2.1.1.28	INTEGER	read-write	This variable describes the variety of Zero Code Suppression used on this interface, which in turn affects a number of its characteristics. ds3B3ZS and e3HDB3 refer to the use of specified patterns of normal bits and bipolar violations which are used to replace sequences of zero bits of a specified length. NOTE: This is applicable only for E3 for now.
INT csDs3ConfigLineStatus	1.3.6.1.4.1.3085.3.1.3.2.1.1.24	INTEGER	read-only	This variable indicates the Line Status of the interface. It contains loopback state information and failure state information. The csDs3ConfigLineStatus is a bit map represented as a sum, therefore, it can represent multiple failures and a loopback (see csDs3ConfigLoopbackStatus object for the type of loopback) simultaneously. The ds3NoAlarm must be set if and only if no other flag is set. If the ds3LoopbackState bit is set, the loopback in effect can be determined from the csDs3ConfigLoopbackStatus object. The various bit positions are: 0 ds3NoAlarm No alarm present 1 ds3RcvRAIFailure Receiving Yellow/Remote Alarm Indication 2 ds3XmitRAIAlarm Transmitting Yellow/Remote Alarm Indication 3 ds3RcvAIS Receiving AIS failure state 4 ds3XmitAIS Transmitting AIS 5 ds3LOF Receiving LOF failure state 6 ds3LOS Receiving LOS failure state 7 ds3LoopbackState Looping the received signal 8 ds3RcvTestCode Receiving a Test Pattern 9 ds3OtherFailure any line status not defined here 10 ds3UnavailSigState Near End in Unavailable Signal State 11 ds3NetEquipOOS Carrier Equipment Out of Service
INT csDs3ConfigLoopbackStatus	1.3.6.1.4.1.3085.3.1.3.2.1.1.23	INTEGER	read-only	This variable represents the current state of the loopback on the DS3 interface. It contains information about loopbacks established by a manager and remotely from the far end. The csDs3ConfigLoopbackStatus is a bit map represented as a sum, therefore is can represent multiple loopbacks simultaneously. The various bit positions are: 1 ds3NoLoopback 2 ds3NearEndPayloadLoopback 4 ds3NearEndLineLoopback 8 ds3NearEndOtherLoopback 16 ds3NearEndInwardLoopback 32 ds3FarEndPayloadLoopback 64 ds3FarEndLineLoopback
INT csDs3ConfigLoopbackType	1.3.6.1.4.1.3085.3.1.3.2.1.1.22	INTEGER	read-write	This object represents the desired loopback configuration of the DS3 interface. The values mean: noLoop Not in the loopback state. A device that is not capable of performing a loopback on the interface shall always return this as its value. It is the default value. payloadLoop The received signal at this interface is looped through the device. Typically the received signal is looped back for retransmission after it has passed through the device's framing function. lineLoop The received signal at this interface does not go through the device (minimum penetration) but is looped back out. otherLoop Loopbacks that are not defined here. Currently not used in the IPSX system. inwardLoop The sent signal at this interface is looped back through the device. dualLoop Both lineLoop and inwardLoop will be active simultaneously.
STR csDs3ConfigMdlEic	1.3.6.1.4.1.3085.3.1.3.2.1.1.9	DisplayString	read-write	This object specifies the Equipment Identification Code. NOTE: This is applicable only for DS3.
STR csDs3ConfigMdlFic	1.3.6.1.4.1.3085.3.1.3.2.1.1.11	DisplayString	read-write	This object specifies the Frame Identification Code. NOTE: This is applicable only for DS3.
STR csDs3ConfigMdlGenerator	1.3.6.1.4.1.3085.3.1.3.2.1.1.15	DisplayString	read-write	This object specifies the Generator number string sent in the MDL Test Signal message. NOTE: This is applicable only for DS3.
INT csDs3ConfigMdlIdleSig	1.3.6.1.4.1.3085.3.1.3.2.1.1.7	INTEGER	read-write	This object controls the transmission of the MDL Idle Signal message. NOTE: This is applicable only for DS3.
STR csDs3ConfigMdlLic	1.3.6.1.4.1.3085.3.1.3.2.1.1.10	DisplayString	read-write	This object specifies the Location Identification Code. NOTE: This is applicable only for DS3.
INT csDs3ConfigMdlPath	1.3.6.1.4.1.3085.3.1.3.2.1.1.6	INTEGER	read-write	This object controls the transmission of the MDL Path message. NOTE: This is applicable only for DS3.
STR csDs3ConfigMdlPfi	1.3.6.1.4.1.3085.3.1.3.2.1.1.13	DisplayString	read-write	This object specifies the Facility Identification Code sent in the MDL Path message. NOTE: This is applicable only for DS3.
STR csDs3ConfigMdlPort	1.3.6.1.4.1.3085.3.1.3.2.1.1.14	DisplayString	read-write	This object specifies the Port number string sent in the MDL Idle Signal message. NOTE: This is applicable only for DS3.
INT csDs3ConfigMdlTestSig	1.3.6.1.4.1.3085.3.1.3.2.1.1.8	INTEGER	read-write	This object controls the transmission of the MDL Test Signal message. NOTE: This is applicable only for DS3.
STR csDs3ConfigMdlUnit	1.3.6.1.4.1.3085.3.1.3.2.1.1.12	DisplayString	read-write	This object specifies the Unit Identification Code. NOTE: This is applicable only for DS3.
I32 csDs3ConfigModuleIndex	1.3.6.1.4.1.3085.3.1.3.2.1.1.2	Integer32	not-accessible	This object identifies the type of of the Ds3 Module on the blade identified by csChDs3SlotIndex.
INT csDs3ConfigNationalBit	1.3.6.1.4.1.3085.3.1.3.2.1.1.29	INTEGER	read-write	Bit 12 of the E3 G.751 frame. NOTE: This is applicable only for E3.
OPE csDs3ConfigOperStatus	1.3.6.1.4.1.3085.3.1.3.2.1.1.18	OperStatus	read-only	This object indicates the current operational status of this Ds3 port.
I32 csDs3ConfigPortIndex	1.3.6.1.4.1.3085.3.1.3.2.1.1.3	Integer32	not-accessible	This object identifies the location of the Ds3 Port on the module identified by csChDs3ModuleIndex. Together with csDs3ConfigSlotIndex, csDs3ConfigModuleIndex, it uniquely identifies a physical port.
INT csDs3ConfigSendCode	1.3.6.1.4.1.3085.3.1.3.2.1.1.21	INTEGER	read-write	This variable indicates what type of code is being sent across the DS3 interface by the device. Setting this variable causes the interface to begin sending the code requested. The values mean: sendNoCode sending looped or normal data sendLineCode sending a request for a line loopback sendPayloadCode sending a request for a payload loopback (i.e., all DS1/E1s in a DS3/E3 frame) sendResetCode sending a loopback deactivation request NOTE: This is applicable only for DS3.
I32 csDs3ConfigSlotIndex	1.3.6.1.4.1.3085.3.1.3.2.1.1.1	Integer32	not-accessible	This object identifies the blade to which this Ds3 Port is attached. Together with csDs3ConfigModuleIndex, csDs3ConfigPortIndex, it uniquely identifies a physical port.
csDs3ConfigTable	1.3.6.1.4.1.3085.3.1.3.2.1		not-accessible	The DS3 configuration table.
I32 csDs3ConfigTestT1Id	1.3.6.1.4.1.3085.3.1.3.2.1.1.16	Integer32	read-write	This object identifies which of the 28 T1's within this DS3 are to be broken out into the Test T1 port. If none of the T1's are to be broken out, this object should be set to 0. NOTE: This is applicable only for DS3.
INT csDs3ConfigTimeElapsed	1.3.6.1.4.1.3085.3.1.3.2.1.1.25	INTEGER	read-only	The number of seconds that have elapsed since the beginning of the near end current error-measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.
INT csDs3ConfigValidInterval	1.3.6.1.4.1.3085.3.1.3.2.1.1.26	INTEGER	read-only	The number of previous near end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15 minute near end intervals since the interface has been online. In the case where the agent is a proxy, it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.
INT csDs3Ds1ClockSource	1.3.6.1.4.1.3085.3.1.3.2.2.1.7	INTEGER	read-write	This object specifies the source of the Transmit Clock used on the DS1 assigned to this channel. If this object is set to internal(1), a local clock source is used. If this object is set to line(2), the recovered received clock is used as the transmit clock. NOTE: This is applicable only for T1.
csDs3Ds1ConfigEntry	1.3.6.1.4.1.3085.3.1.3.2.2.1		not-accessible	An entry in the DS3 DS1 Configuration table.
csDs3Ds1ConfigTable	1.3.6.1.4.1.3085.3.1.3.2.2		not-accessible	The DS3 DS1 configuration table. This is used to configure each of the DS1 connections within a complete DS3.
PER csDs3Ds1CurrentBESs	1.3.6.1.4.1.3085.3.1.3.2.7.1.8	PerfCurrentCount	read-only	The number of Bursty Errored Seconds.
PER csDs3Ds1CurrentCSSs	1.3.6.1.4.1.3085.3.1.3.2.7.1.5	PerfCurrentCount	read-only	The number of Controlled Slip Seconds.
PER csDs3Ds1CurrentDMs	1.3.6.1.4.1.3085.3.1.3.2.7.1.9	PerfCurrentCount	read-only	The number of Degraded Minutes.
csDs3Ds1CurrentEntry	1.3.6.1.4.1.3085.3.1.3.2.7.1		not-accessible	An entry in the DS1 Current table.
PER csDs3Ds1CurrentESs	1.3.6.1.4.1.3085.3.1.3.2.7.1.1	PerfCurrentCount	read-only	The number of Errored Seconds.
PER csDs3Ds1CurrentLCVs	1.3.6.1.4.1.3085.3.1.3.2.7.1.10	PerfCurrentCount	read-only	The number of Line Code Violations (LCVs).
PER csDs3Ds1CurrentLESs	1.3.6.1.4.1.3085.3.1.3.2.7.1.7	PerfCurrentCount	read-only	The number of Line Errored Seconds.
PER csDs3Ds1CurrentPCVs	1.3.6.1.4.1.3085.3.1.3.2.7.1.6	PerfCurrentCount	read-only	The number of Path Coding Violations.
PER csDs3Ds1CurrentSEFSs	1.3.6.1.4.1.3085.3.1.3.2.7.1.3	PerfCurrentCount	read-only	The number of Severely Errored Framing Seconds.
PER csDs3Ds1CurrentSESs	1.3.6.1.4.1.3085.3.1.3.2.7.1.2	PerfCurrentCount	read-only	The number of Severely Errored Seconds.
csDs3Ds1CurrentTable	1.3.6.1.4.1.3085.3.1.3.2.7		not-accessible	The DS1 current table contains various statistics being collected for the current 15 minute interval.
PER csDs3Ds1CurrentUASs	1.3.6.1.4.1.3085.3.1.3.2.7.1.4	PerfCurrentCount	read-only	The number of Unavailable Seconds.
INT csDs3Ds1Fdl	1.3.6.1.4.1.3085.3.1.3.2.2.1.8	INTEGER	read-write	This is used to enable/disable 1 second transmission of performance reports via ANSI 403 FDL. If this is disabled, the AT&T 54016 version of FDL is used. Note, FDL is available only for ESF framing. And so it is only applicable for T1.
INT csDs3Ds1Framing	1.3.6.1.4.1.3085.3.1.3.2.2.1.2	INTEGER	read-write	This object specifies the framing used on the DS1 assigned to this channel.
I32 csDs3Ds1Id	1.3.6.1.4.1.3085.3.1.3.2.2.1.1	Integer32	not-accessible	This identifies a single DS1 within a complete DS3.
NUM csDs3Ds1IntervalBESs	1.3.6.1.4.1.3085.3.1.3.2.8.1.9	PerfIntervalCount	read-only	The number of Bursty Errored Seconds.
NUM csDs3Ds1IntervalCSSs	1.3.6.1.4.1.3085.3.1.3.2.8.1.6	PerfIntervalCount	read-only	The number of Controlled Slip Seconds.
NUM csDs3Ds1IntervalDMs	1.3.6.1.4.1.3085.3.1.3.2.8.1.10	PerfIntervalCount	read-only	The number of Degraded Minutes.
csDs3Ds1IntervalEntry	1.3.6.1.4.1.3085.3.1.3.2.8.1		not-accessible	An entry in the DS1 Interval table.
NUM csDs3Ds1IntervalESs	1.3.6.1.4.1.3085.3.1.3.2.8.1.2	PerfIntervalCount	read-only	The number of Errored Seconds.
NUM csDs3Ds1IntervalLCVs	1.3.6.1.4.1.3085.3.1.3.2.8.1.11	PerfIntervalCount	read-only	The number of Line Code Violations.
NUM csDs3Ds1IntervalLESs	1.3.6.1.4.1.3085.3.1.3.2.8.1.8	PerfIntervalCount	read-only	The number of Line Errored Seconds.
INT csDs3Ds1IntervalNumber	1.3.6.1.4.1.3085.3.1.3.2.8.1.1	INTEGER	not-accessible	A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 1.
NUM csDs3Ds1IntervalPCVs	1.3.6.1.4.1.3085.3.1.3.2.8.1.7	PerfIntervalCount	read-only	The number of Path Coding Violations.
NUM csDs3Ds1IntervalSEFSs	1.3.6.1.4.1.3085.3.1.3.2.8.1.4	PerfIntervalCount	read-only	The number of Severely Errored Framing Seconds.
NUM csDs3Ds1IntervalSESs	1.3.6.1.4.1.3085.3.1.3.2.8.1.3	PerfIntervalCount	read-only	The number of Severely Errored Seconds.
csDs3Ds1IntervalTable	1.3.6.1.4.1.3085.3.1.3.2.8		not-accessible	The DS1 Interval Table contains various statistics collected by each DS1 Interface over the previous 24 hours of operation. The past 24 hours are broken into 96 completed 15 minute intervals. Each row in this table represents one such interval (identified by csDs3Ds1IntervalNumber) for one specific instance (identified by csDs3Ds1Id).
NUM csDs3Ds1IntervalUASs	1.3.6.1.4.1.3085.3.1.3.2.8.1.5	PerfIntervalCount	read-only	The number of Unavailable Seconds. This object may decrease if the occurance of unavailable seconds occurs across an inteval boundary.
T/F csDs3Ds1IntervalValidData	1.3.6.1.4.1.3085.3.1.3.2.8.1.12	TruthValue	read-only	This variable indicates if the data for this interval is valid.
INT csDs3Ds1InvertData	1.3.6.1.4.1.3085.3.1.3.2.2.1.6	INTEGER	read-write	This object specifies whether the 'invert data' feature is enabled on the DS1 assigned to this channel. This feature must be enabled if the Line Code parameter (csDs3Ds1LineCode) is set to ami. NOTE: This is applicable only for T1.
INT csDs3Ds1LineCode	1.3.6.1.4.1.3085.3.1.3.2.2.1.5	INTEGER	read-write	This object specifies the variety of Zero Code Suppression used on the on the DS1 assigned to this channel. NOTE: This is applicable only for T1.
I32 csDs3Ds1LineConfig	1.3.6.1.4.1.3085.3.1.3.2.2.1.13	Integer32	read-write	This variable represents DS1/E1 transmit line configuration. This is normally used for dignostic or service purpose, it is not supposed for user to configure. The various bit positions are: BIT(0) not used BIT(1) ds1NoAlarm BIT(2) ds1RcvFarEndLOF BIT(3) ds1XmtFarEndLOF BIT(4) ds1RcvAIS BIT(5) ds1XmtAIS BIT(6) ds1LossOfFrame BIT(7) ds1LossOfSignal BIT(8) ds1LoopbackState BIT(9) ds1T16AIS BIT(10) ds1RcvFarEndLOMF BIT(11) ds1XmtFarEndLOMF BIT(12) ds1RcvTestCode BIT(13) ds1OtherFailure BIT(14) ds1UnavailSigState BIT(15) ds1NetEquipOOS BIT(16) ds1RcvPayloadAIS BIT(17) ds1Ds2PerfThreshold BIT(18) ds1XmtTrnkCond
I32 csDs3Ds1LineStatus	1.3.6.1.4.1.3085.3.1.3.2.2.1.14	Integer32	read-only	This variable represents DS1/E1 transmit and receive line status. The various bit positions are: BIT(0) not used BIT(1) ds1NoAlarm BIT(2) ds1RcvFarEndLOF BIT(3) ds1XmtFarEndLOF BIT(4) ds1RcvAIS BIT(5) ds1XmtAIS BIT(6) ds1LossOfFrame BIT(7) ds1LossOfSignal BIT(8) ds1LoopbackState BIT(9) ds1T16AIS BIT(10) ds1RcvFarEndLOMF BIT(11) ds1XmtFarEndLOMF BIT(12) ds1RcvTestCode BIT(13) ds1OtherFailure BIT(14) ds1UnavailSigState BIT(15) ds1NetEquipOOS BIT(16) ds1RcvPayloadAIS BIT(17) ds1Ds2PerfThreshold BIT(18) ds1XmtTrnkCond
INT csDs3Ds1LoopbackStatus	1.3.6.1.4.1.3085.3.1.3.2.2.1.12	INTEGER	read-only	This variable represents the current state of the loopback on the DS1 interface. It contains information about loopbacks established by a manager and remotely from the far end. NOTE: This is applicable only for T1. The csDs3Ds1LoopbackStatus is a bit map represented as a sum, therefore is can represent multiple loopbacks simultaneously. The various bit positions are: 1 ds1NoLoopback 2 ds1NearEndPayloadLoopback 4 ds1NearEndLineLoopback 8 ds1NearEndOtherLoopback 16 ds1NearEndInwardLoopback 32 ds1FarEndPayloadLoopback 64 ds1FarEndLineLoopback
INT csDs3Ds1LoopbackType	1.3.6.1.4.1.3085.3.1.3.2.2.1.11	INTEGER	read-write	This object represents the desired loopback configuration of the DS1 interface. This variable will be interpreted only when csDs3Ds1LoopbackDestination is set to a valid value. NOTE: This is applicable only for T1. noLoop Not in the loopback state. A device that is not capable of performing a loopback on the interface shall always return this as its value. payloadLoop The received signal at this interface is looped through the device. Typically the received signal is looped back for retransmission after it has passed through the device's framing function. lineLoop The received signal at this interface does not go through the device (minimum penetration) but is looped back out. otherLoop Loopbacks that are not defined here. Currently not used in the IPSX system inwardLoop The transmitted signal at this interface is looped back and received by the same interface. What is transmitted onto the line is product dependent. Cannot be applied to far end. dualLoop Both dsx1LineLoop and dsx1InwardLoop will be active simultaneously. Cannot be applied to far end.
OPE csDs3Ds1OperStatus	1.3.6.1.4.1.3085.3.1.3.2.2.1.9	OperStatus	read-only	This object indicates the current operational status of this DS1.
INT csDs3Ds1SendCode	1.3.6.1.4.1.3085.3.1.3.2.2.1.10	INTEGER	read-write	This variable indicates what type of code is being sent across the DS1 interface by the device. Setting this variable causes the interface to send the code requested. NOTE: This is applicable only for T1.. The values mean: ds1SendNoCode sending looped or normal data ds1SendLineCode sending a request for a line loopback ds1SendPayloadCode sending a request for a payload loopback ds1SendResetCode sending a loopback termination request
PER csDs3Ds1TotalBESs	1.3.6.1.4.1.3085.3.1.3.2.9.1.8	PerfTotalCount	read-only	The number of Bursty Errored Seconds (BESs) encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
PER csDs3Ds1TotalCSSs	1.3.6.1.4.1.3085.3.1.3.2.9.1.5	PerfTotalCount	read-only	The number of Controlled Slip Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
PER csDs3Ds1TotalDMs	1.3.6.1.4.1.3085.3.1.3.2.9.1.9	PerfTotalCount	read-only	The number of Degraded Minutes (DMs) encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
csDs3Ds1TotalEntry	1.3.6.1.4.1.3085.3.1.3.2.9.1		not-accessible	An entry in the DS1 Total table.
PER csDs3Ds1TotalESs	1.3.6.1.4.1.3085.3.1.3.2.9.1.1	PerfTotalCount	read-only	The sum of Errored Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
PER csDs3Ds1TotalLCVs	1.3.6.1.4.1.3085.3.1.3.2.9.1.10	PerfTotalCount	read-only	The number of Line Code Violations (LCVs) encountered by a DS1 interface in the current 15 minute interval. Invalid 15 minute intervals count as 0.
PER csDs3Ds1TotalLESs	1.3.6.1.4.1.3085.3.1.3.2.9.1.7	PerfTotalCount	read-only	The number of Line Errored Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
PER csDs3Ds1TotalPCVs	1.3.6.1.4.1.3085.3.1.3.2.9.1.6	PerfTotalCount	read-only	The number of Path Coding Violations encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
PER csDs3Ds1TotalSEFSs	1.3.6.1.4.1.3085.3.1.3.2.9.1.3	PerfTotalCount	read-only	The number of Severely Errored Framing Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
PER csDs3Ds1TotalSESs	1.3.6.1.4.1.3085.3.1.3.2.9.1.2	PerfTotalCount	read-only	The number of Severely Errored Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
csDs3Ds1TotalTable	1.3.6.1.4.1.3085.3.1.3.2.9		not-accessible	The DS1 Total Table contains the cumulative sum of the various statistics for the 24 hour period preceding the current interval.
PER csDs3Ds1TotalUASs	1.3.6.1.4.1.3085.3.1.3.2.9.1.4	PerfTotalCount	read-only	The number of Unavailable Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
INT csDs3Ds1YellowAlarmDetect	1.3.6.1.4.1.3085.3.1.3.2.2.1.3	INTEGER	read-write	This object specifies whether Yellow Alarm detection is active on the DS1 assigned to this channel.
INT csDs3Ds1YellowAlarmGen	1.3.6.1.4.1.3085.3.1.3.2.2.1.4	INTEGER	read-write	This object specifies whether Yellow Alarm generation is active on the DS1 assigned to this channel. NOTE: This is applicable only for T1.
INT csDs3E1IntBits	1.3.6.1.4.1.3085.3.1.3.2.2.1.15	INTEGER	read-write	This variable is used to configure the 2-bits international bits for the E1 interface. NOTE: This is applicable only for E1.
INT csDs3E1NatBits	1.3.6.1.4.1.3085.3.1.3.2.2.1.16	INTEGER	read-write	This 4-bit object is added for the E1 sub-multiframe aligned national bit codeword configuration. NOTE: This is applicable only for E1.
PER csDs3StatCurrentCCVs	1.3.6.1.4.1.3085.3.1.3.2.4.1.8	PerfCurrentCount	read-only	The number of C-bit Coding Violations. NOTE: This is applicable only for DS3.
PER csDs3StatCurrentCESs	1.3.6.1.4.1.3085.3.1.3.2.4.1.9	PerfCurrentCount	read-only	The number of C-bit Errored Seconds. NOTE: This is applicable only for DS3.
PER csDs3StatCurrentCSESs	1.3.6.1.4.1.3085.3.1.3.2.4.1.10	PerfCurrentCount	read-only	The number of C-bit Severely Errored Seconds. NOTE: This is applicable only for DS3.
csDs3StatCurrentEntry	1.3.6.1.4.1.3085.3.1.3.2.4.1		not-accessible	An entry in the DS3/E3 Current table.
PER csDs3StatCurrentLCVs	1.3.6.1.4.1.3085.3.1.3.2.4.1.5	PerfCurrentCount	read-only	The counter associated with the number of Line Coding Violations. NOTE: This is applicable for both E3 and DS3.
PER csDs3StatCurrentLESs	1.3.6.1.4.1.3085.3.1.3.2.4.1.7	PerfCurrentCount	read-only	The number of Line Errored Seconds. NOTE: This is applicable for both E3 and DS3.
PER csDs3StatCurrentLSESs	1.3.6.1.4.1.3085.3.1.3.2.4.1.11	PerfCurrentCount	read-only	The number of Line Severely Errored Seconds. NOTE: This is applicable for both E3 and DS3.
PER csDs3StatCurrentPCVs	1.3.6.1.4.1.3085.3.1.3.2.4.1.6	PerfCurrentCount	read-only	The counter associated with the number of P-bit Coding Violations. NOTE: This is applicable only for DS3.
PER csDs3StatCurrentPESs	1.3.6.1.4.1.3085.3.1.3.2.4.1.1	PerfCurrentCount	read-only	The counter associated with the number of P-bit Errored Seconds. NOTE: This is applicable only for DS3.
PER csDs3StatCurrentPSESs	1.3.6.1.4.1.3085.3.1.3.2.4.1.2	PerfCurrentCount	read-only	The counter associated with the number of P-bit Severely Errored Seconds. NOTE: This is applicable only for DS3.
PER csDs3StatCurrentSEFSs	1.3.6.1.4.1.3085.3.1.3.2.4.1.3	PerfCurrentCount	read-only	The counter associated with the number of Severely Errored Framing Seconds. NOTE: This is applicable only for DS3.
csDs3StatCurrentTable	1.3.6.1.4.1.3085.3.1.3.2.4		not-accessible	The DS3/E3 current table contains various statistics being collected for the current 15 minute interval.
PER csDs3StatCurrentUASs	1.3.6.1.4.1.3085.3.1.3.2.4.1.4	PerfCurrentCount	read-only	The counter associated with the number of Unavailable Seconds. NOTE: This is applicable only for DS3.
NUM csDs3StatIntervalCCVs	1.3.6.1.4.1.3085.3.1.3.2.5.1.9	PerfIntervalCount	read-only	The number of C-bit Coding Violations. NOTE: This is applicable only for DS3.
NUM csDs3StatIntervalCESs	1.3.6.1.4.1.3085.3.1.3.2.5.1.10	PerfIntervalCount	read-only	The number of C-bit Errored Seconds. NOTE: This is applicable only for DS3.
NUM csDs3StatIntervalCSESs	1.3.6.1.4.1.3085.3.1.3.2.5.1.11	PerfIntervalCount	read-only	The number of C-bit Severely Errored Seconds. NOTE: This is applicable only for DS3.
csDs3StatIntervalEntry	1.3.6.1.4.1.3085.3.1.3.2.5.1		not-accessible	An entry in the DS3/E3 Interval table.
NUM csDs3StatIntervalLCVs	1.3.6.1.4.1.3085.3.1.3.2.5.1.6	PerfIntervalCount	read-only	The counter associated with the number of Line Coding Violations. NOTE: This is applicable for both E3 and DS3.
NUM csDs3StatIntervalLESs	1.3.6.1.4.1.3085.3.1.3.2.5.1.8	PerfIntervalCount	read-only	The number of Line Errored Seconds (BPVs or illegal zero sequences). NOTE: This is applicable for both E3 and DS3.
NUM csDs3StatIntervalLSESs	1.3.6.1.4.1.3085.3.1.3.2.5.1.12	PerfIntervalCount	read-only	The number of Line Severely Errored Seconds. NOTE: This is applicable for both E3 and DS3.
INT csDs3StatIntervalNumber	1.3.6.1.4.1.3085.3.1.3.2.5.1.1	INTEGER	not-accessible	A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 1.
NUM csDs3StatIntervalPCVs	1.3.6.1.4.1.3085.3.1.3.2.5.1.7	PerfIntervalCount	read-only	The counter associated with the number of P-bit Coding Violations. NOTE: This is applicable only for DS3.
NUM csDs3StatIntervalPESs	1.3.6.1.4.1.3085.3.1.3.2.5.1.2	PerfIntervalCount	read-only	The counter associated with the number of P-bit Errored Seconds. NOTE: This is applicable only for DS3.
NUM csDs3StatIntervalPSESs	1.3.6.1.4.1.3085.3.1.3.2.5.1.3	PerfIntervalCount	read-only	The counter associated with the number of P-bit Severely Errored Seconds. NOTE: This is applicable only for DS3.
NUM csDs3StatIntervalSEFSs	1.3.6.1.4.1.3085.3.1.3.2.5.1.4	PerfIntervalCount	read-only	The counter associated with the number of Severely Errored Framing Seconds. NOTE: This is applicable for both DS3 and E3.
csDs3StatIntervalTable	1.3.6.1.4.1.3085.3.1.3.2.5		not-accessible	The DS3/E3 Interval Table contains various statistics collected by each DS3/E3 Interface over the previous 24 hours of operation. The past 24 hours are broken into 96 completed 15 minute intervals. Each row in this table represents one such interval (identified by csDs3StatIntervalNumber) and for one specific DS3 port (identifed by csDs3ConfigPortIndex).
NUM csDs3StatIntervalUASs	1.3.6.1.4.1.3085.3.1.3.2.5.1.5	PerfIntervalCount	read-only	The counter associated with the number of Unavailable Seconds. This object may decrease if the occurance of unavailable seconds occurs across an inteval boundary. NOTE: This is applicable only for DS3.
T/F csDs3StatIntervalValidData	1.3.6.1.4.1.3085.3.1.3.2.5.1.13	TruthValue	read-only	This variable indicates if the data for this interval is valid.
PER csDs3StatTotalCCVs	1.3.6.1.4.1.3085.3.1.3.2.6.1.8	PerfTotalCount	read-only	The number of C-bit Coding Violations encountered by a DS3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. NOTE: This is applicable only for DS3.
PER csDs3StatTotalCESs	1.3.6.1.4.1.3085.3.1.3.2.6.1.9	PerfTotalCount	read-only	The number of C-bit Errored Seconds encountered by a DS3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. NOTE: This is applicable only for DS3.
PER csDs3StatTotalCSESs	1.3.6.1.4.1.3085.3.1.3.2.6.1.10	PerfTotalCount	read-only	The number of C-bit Severely Errored Seconds encountered by a DS3 interface in the previous 24-hour interval. Invalid 15 minute intervals count as 0. NOTE: This is applicable only for DS3.
csDs3StatTotalEntry	1.3.6.1.4.1.3085.3.1.3.2.6.1		not-accessible	An entry in the DS3/E3 Total table.
PER csDs3StatTotalLCVs	1.3.6.1.4.1.3085.3.1.3.2.6.1.5	PerfTotalCount	read-only	The counter associated with the number of Line Coding Violations encountered by a DS3/E3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. NOTE: This is applicable for both E3 and DS3.
PER csDs3StatTotalLESs	1.3.6.1.4.1.3085.3.1.3.2.6.1.7	PerfTotalCount	read-only	The number of Line Errored Seconds (BPVs or illegal zero sequences) encountered by a DS3/E3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. NOTE: This is applicable for both E3 and DS3.
PER csDs3StatTotalLSESs	1.3.6.1.4.1.3085.3.1.3.2.6.1.11	PerfTotalCount	read-only	The number of Line Severely Errored Seconds encountered by a DS3 interface in the previous 24-hour interval. Invalid 15 minute intervals count as 0. NOTE: This is applicable for both E3 and DS3.
PER csDs3StatTotalPCVs	1.3.6.1.4.1.3085.3.1.3.2.6.1.6	PerfTotalCount	read-only	The counter associated with the number of P-bit Coding Violations, encountered by a DS3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. NOTE: This is applicable only for DS3.
PER csDs3StatTotalPESs	1.3.6.1.4.1.3085.3.1.3.2.6.1.1	PerfTotalCount	read-only	The counter associated with the number of P-bit Errored Seconds, encountered by a DS3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. NOTE: This is applicable only for DS3.
PER csDs3StatTotalPSESs	1.3.6.1.4.1.3085.3.1.3.2.6.1.2	PerfTotalCount	read-only	The counter associated with the number of P-bit Severely Errored Seconds, encountered by a DS3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. NOTE: This is applicable only for DS3.
PER csDs3StatTotalSEFSs	1.3.6.1.4.1.3085.3.1.3.2.6.1.3	PerfTotalCount	read-only	The counter associated with the number of Severely Errored Framing Seconds, encountered by a DS3/E3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. NOTE: This is applicable only for DS3.
csDs3StatTotalTable	1.3.6.1.4.1.3085.3.1.3.2.6		not-accessible	The DS3/E3 Total Table contains the cumulative sum of the various statistics for the 24 hour period preceding the current interval.
PER csDs3StatTotalUASs	1.3.6.1.4.1.3085.3.1.3.2.6.1.4	PerfTotalCount	read-only	The counter associated with the number of Unavailable Seconds, encountered by a DS3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. NOTE: This is applicable only for DS3.
INT csEthAdminStatus	1.3.6.1.4.1.3085.3.1.3.1.1.1.9	INTEGER	read-write	This object is used to enable/disable thie Ethernet port.
INT csEthAutoneg	1.3.6.1.4.1.3085.3.1.3.1.1.1.5	INTEGER	read-write	This object is used to enable or disable the autonegotiation feature of this Ethernet port. This feature is used to automatically negotiate the Speed and Duplex mode for 10/100 Mbps Ethernet ports.
INT csEthDuplex	1.3.6.1.4.1.3085.3.1.3.1.1.1.6	INTEGER	read-write	This object is used to specify the Duplex mode of this Ethernet port. This is used only if csEthAutoneg is disabled. Note: The default value is removed because it is not fixed in the system after reboot when autonegotiation enabled. It is hardware configuration dependent.
INT csEthEncapType	1.3.6.1.4.1.3085.3.1.3.1.1.1.4	INTEGER	read-write	This object identifies the encapsulation method used on this Ethernet port.
csEthEntry	1.3.6.1.4.1.3085.3.1.3.1.1.1		not-accessible	An entry in the Ethernet Table.
I32 csEthLinkTestInterval	1.3.6.1.4.1.3085.3.1.3.1.1.1.8	Integer32	read-write	This object is used to specify the interval, in seconds, between Link Test packet transmissions. If this object is set to 0, no Link Test packets are sent.
I32 csEthModuleIndex	1.3.6.1.4.1.3085.3.1.3.1.1.1.2	Integer32	not-accessible	This object identifies a specific module on the blade installed in csEthSlotIndex.
OPE csEthOperStatus	1.3.6.1.4.1.3085.3.1.3.1.1.1.10	OperStatus	read-only	This object indicates the current operational status of this Ethernet port.
I32 csEthPortIndex	1.3.6.1.4.1.3085.3.1.3.1.1.1.3	Integer32	not-accessible	This object identifies a specific port on the module installed in csEthModuleIndex.
INT csEthPppoeService	1.3.6.1.4.1.3085.3.1.3.1.1.1.11	INTEGER	read-write	This object is used to enable or disable PPPoE service on Ethernet Ports.
I32 csEthSlotIndex	1.3.6.1.4.1.3085.3.1.3.1.1.1.1	Integer32	not-accessible	This object identifies the slot in which the blade that supports this port is installed.
INT csEthSpeed	1.3.6.1.4.1.3085.3.1.3.1.1.1.7	INTEGER	read-write	This object is used to specify the speed of this Ethernet port. This is used only if csEthAutoneg is disabled. Note: The default value is removed because it is not fixed in the system after reboot when autonegotiation enabled. It is hardware configuration dependent.
csEthStatsEntry	1.3.6.1.4.1.3085.3.1.3.1.3.1		not-accessible	An entry in the Ethernet Statistic Table.
C64 csEthStatsRx1024Pkts	1.3.6.1.4.1.3085.3.1.3.1.3.1.36	Counter64	read-only	The counter associated with the number of packets 1024 bytes or more in length, including bad packets. It's only for Giga bit Ethernet card.
C64 csEthStatsRx1024To1518Pkts	1.3.6.1.4.1.3085.3.1.3.1.3.1.29	Counter64	read-only	The counter associated with the number of packets 1024 to 1518 bytes in length, including bad packets.
C64 csEthStatsRx128To255Pkts	1.3.6.1.4.1.3085.3.1.3.1.3.1.26	Counter64	read-only	The counter associated with the number of packets 128 to 255 bytes in length, including bad packetsO.
C64 csEthStatsRx1519Pkts	1.3.6.1.4.1.3085.3.1.3.1.3.1.30	Counter64	read-only	The counter associated with the number of packets with length larger than 1518 bytes and the maximum packet size, including bad packets.
C64 csEthStatsRx256To511Pkts	1.3.6.1.4.1.3085.3.1.3.1.3.1.27	Counter64	read-only	The counter associated with the number of packets 256 to 511 bytes in length, including bad packets
C64 csEthStatsRx512To1023Pkts	1.3.6.1.4.1.3085.3.1.3.1.3.1.28	Counter64	read-only	The counter associated with the number of packets 512 to 1023 bytes in length, including bad packets.
C64 csEthStatsRx64Pkts	1.3.6.1.4.1.3085.3.1.3.1.3.1.24	Counter64	read-only	The counter associated with the number of received packets 64 bytes in length, including bad packets.
C64 csEthStatsRx65To127Pkts	1.3.6.1.4.1.3085.3.1.3.1.3.1.25	Counter64	read-only	The counter associated with the number of received packets 65 to 127 bytes in length, including bad packets.
C64 csEthStatsRxFalsCrcCounts	1.3.6.1.4.1.3085.3.1.3.1.3.1.32	Counter64	read-only	The counter associated with the number of false carrier events detected
C64 csEthStatsRxLongCrcCounts	1.3.6.1.4.1.3085.3.1.3.1.3.1.23	Counter64	read-only	The counter associated with the number of packets larger than maximum packet size received with a CRC error
C64 csEthStatsRxLongPktsCounts	1.3.6.1.4.1.3085.3.1.3.1.3.1.22	Counter64	read-only	The counter associated with the number ofpackets larger than maximum packet size received without any error .
C64 csEthStatsRxNormAliCounts	1.3.6.1.4.1.3085.3.1.3.1.3.1.21	Counter64	read-only	The counter associated with the number of packets received with an nonintegral number of bytes and a CRC error with lengths between 64 bytes and maximum packet size.
C64 csEthStatsRxNormCrcCounts	1.3.6.1.4.1.3085.3.1.3.1.3.1.20	Counter64	read-only	The counter associated with the number of packets received with an integral number of bytes and a CRC error with lengths between 64 bytes and maximum packet size .
C64 csEthStatsRxOctsBad	1.3.6.1.4.1.3085.3.1.3.1.3.1.33	Counter64	read-only	The counter associated with the number of bytes received in packets with errors.
C64 csEthStatsRxOvfCounts	1.3.6.1.4.1.3085.3.1.3.1.3.1.18	Counter64	read-only	The counter associated with the number of received packets not fully accepted due to receive FIFO overflow .
C64 csEthStatsRxPausePktsOk	1.3.6.1.4.1.3085.3.1.3.1.3.1.31	Counter64	read-only	The counter associated with the number of correct received flow-control packets.
C64 csEthStatsRxRuntCounts	1.3.6.1.4.1.3085.3.1.3.1.3.1.17	Counter64	read-only	The counter associated with the number of frames received without SFD detection but with carrier assertion .
C64 csEthStatsRxShortPktsOk	1.3.6.1.4.1.3085.3.1.3.1.3.1.19	Counter64	read-only	The counter associated with the number of received packets without error, less than 64 bytes length .
C64 csEthStatsRxSysErrCounts	1.3.6.1.4.1.3085.3.1.3.1.3.1.34	Counter64	read-only	The counter associated with the number of received packets during which PHY symbol errors were detected.
csEthStatsTable	1.3.6.1.4.1.3085.3.1.3.1.3		not-accessible	The Orion Ethernet Table.
C64 csEthStatsTx1024Pkts	1.3.6.1.4.1.3085.3.1.3.1.3.1.35	Counter64	read-only	The counter associated with the number of transmitted packets 1024 bytes or more in length, including bad packets. It's only for Giga bit Ethernet card.
C64 csEthStatsTx1024To1518Pkts	1.3.6.1.4.1.3085.3.1.3.1.3.1.12	Counter64	read-only	The counter associated with the number of transmitted packets 1024 to 1518 bytes in length, including bad packets.
C64 csEthStatsTx128To255Pkts	1.3.6.1.4.1.3085.3.1.3.1.3.1.9	Counter64	read-only	The counter associated with the number of packets 128 to 255 bytes in length, including bad packets.
C64 csEthStatsTx1519Pkts	1.3.6.1.4.1.3085.3.1.3.1.3.1.13	Counter64	read-only	The counter associated with the number of transmitted packets with length larger than 1518 bytes, including bad packets.
C64 csEthStatsTx16CollisionCounts	1.3.6.1.4.1.3085.3.1.3.1.3.1.5	Counter64	read-only	The counter associated with the number of packets that have experienced 16 consecutive collisions or more.
C64 csEthStatsTx256To511Pkts	1.3.6.1.4.1.3085.3.1.3.1.3.1.10	Counter64	read-only	The counter associated with the number of packets 256 to 511 bytes in length, including bad packets.
C64 csEthStatsTx512To1023Pkts	1.3.6.1.4.1.3085.3.1.3.1.3.1.11	Counter64	read-only	The counter associated with the number of transmitted packets 512 to 1023 bytes in length, including bad packets.
C64 csEthStatsTx64Pkts	1.3.6.1.4.1.3085.3.1.3.1.3.1.7	Counter64	read-only	The counter associated with the number of transmitted packets 64 bytes in length, including bad packets.
C64 csEthStatsTx65To127Pkts	1.3.6.1.4.1.3085.3.1.3.1.3.1.8	Counter64	read-only	The counter associated with the number of packets 64 to 127 bytes in length, including bad packets.
C64 csEthStatsTxColCounts	1.3.6.1.4.1.3085.3.1.3.1.3.1.2	Counter64	read-only	The counter associated with the number of Regular collisions during transmission.
C64 csEthStatsTxDeferPktsOk	1.3.6.1.4.1.3085.3.1.3.1.3.1.1	Counter64	read-only	The counter associated with the number of packets deferred upon the first transmit attempt due to a busy line .
C64 csEthStatsTxErrCounts	1.3.6.1.4.1.3085.3.1.3.1.3.1.15	Counter64	read-only	The counter associated with the number of packets transmitted with an error due to transmit FIFO underflow or txerr signal assertion.
C64 csEthStatsTxLateCollisionCounts	1.3.6.1.4.1.3085.3.1.3.1.3.1.6	Counter64	read-only	The counter associated with the number of transmission abortions due to a collision occurring after the transmission of packets that are 64 bytes in length.
C64 csEthStatsTxMulticCollisionPktsOK	1.3.6.1.4.1.3085.3.1.3.1.3.1.4	Counter64	read-only	The counter associated with the number of packets transmitted without any errors following multiple collisions.
C64 csEthStatsTxOctetsBad	1.3.6.1.4.1.3085.3.1.3.1.3.1.16	Counter64	read-only	The counter associated with the number of bytes transmitted in packets with errors.
C64 csEthStatsTxPausePktsOk	1.3.6.1.4.1.3085.3.1.3.1.3.1.14	Counter64	read-only	The counter associated with the number of correct transmitted flow-control packets.
C64 csEthStatsTxScolPktsOk	1.3.6.1.4.1.3085.3.1.3.1.3.1.3	Counter64	read-only	The counter associated with the number of packets transmitted without any errors following a single collisions.
INT csEthSubIfAdmStatus	1.3.6.1.4.1.3085.3.1.3.1.2.1.6	INTEGER	read-create	This object is used to enable/disable this VLAN.
I32 csEthSubIfChannelIndex	1.3.6.1.4.1.3085.3.1.3.1.2.1.1	Integer32	not-accessible	Channel ID of this VLAN connection. Currently, it will always be 0.
csEthSubIfEntry	1.3.6.1.4.1.3085.3.1.3.1.2.1		not-accessible	The Parameters for a VLAN Interface.
I32 csEthSubIfIndex	1.3.6.1.4.1.3085.3.1.3.1.2.1.2	Integer32	not-accessible	The Sub Interface Id of the Logical Interface.
OPE csEthSubIfOpStatus	1.3.6.1.4.1.3085.3.1.3.1.2.1.7	OperStatus	read-only	The operational status for this VLAN.
INT csEthSubifPppoeService	1.3.6.1.4.1.3085.3.1.3.1.2.1.9	INTEGER	read-write	This object is used to enable or disable PPPoE service on VLAN.
ROW csEthSubIfRowStatus	1.3.6.1.4.1.3085.3.1.3.1.2.1.8	RowStatus	read-create	This object is used to create a new row or modify or destroy an existing row in the manner described in the definition of the RowStatus textual convention. Writable objects in the table may be written in any RowStatus state.
csEthSubIfTable	1.3.6.1.4.1.3085.3.1.3.1.2		not-accessible	The Orion Ethernet Sub-Interface Table.
I32 csEthSubIfUserPriority	1.3.6.1.4.1.3085.3.1.3.1.2.1.4	Integer32	read-create	The user priority for this VLAN
I32 csEthSubIfVlanId	1.3.6.1.4.1.3085.3.1.3.1.2.1.3	Integer32	read-create	The unipue number between 0 and 4095 that identifies a particular VLAN. The range of VLAN IDs supported per port is from 2 to 4094. The null VLAN Id (0) indicates that the tag header contains only user priority information. The VLAN Id 1, 4095 is reserved for implementation use.
STR csEthSubIfVlanName	1.3.6.1.4.1.3085.3.1.3.1.2.1.5	DisplayString	read-create	The name for this VLAN
csEthTable	1.3.6.1.4.1.3085.3.1.3.1.1		not-accessible	The Orion Ethernet Table.
INT csExpFilterColorMeteringMode	1.3.6.1.4.1.3085.3.1.6.14.2.1.1.5	INTEGER	read-create	Used to activate metering.
INT csExpFilterDirection	1.3.6.1.4.1.3085.3.1.6.14.2.1.1.1	INTEGER	not-accessible	The direction to filter.
INT csExpFilterDropPrecedence	1.3.6.1.4.1.3085.3.1.6.14.2.1.1.6	INTEGER	read-create	Used to specify the drop precedence to use.
csExpFilterEntry	1.3.6.1.4.1.3085.3.1.6.14.2.1.1		not-accessible	An entry in this table is used to set the attributes for a matching EXP bits for a inbound/outbound direction for a VR.
I32 csExpFilterExpValue	1.3.6.1.4.1.3085.3.1.6.14.2.1.1.3	Integer32	read-create	The EXP value to change to.
INT csExpFilterIfColorMeteringMode	1.3.6.1.4.1.3085.3.1.6.14.2.3.1.5	INTEGER	read-create	Used to activate metering.
INT csExpFilterIfDirection	1.3.6.1.4.1.3085.3.1.6.14.2.3.1.1	INTEGER	not-accessible	The direction to filter.
INT csExpFilterIfDropPrecedence	1.3.6.1.4.1.3085.3.1.6.14.2.3.1.6	INTEGER	read-create	Used to assign drop precedence.
csExpFilterIfEntry	1.3.6.1.4.1.3085.3.1.6.14.2.3.1		not-accessible	An entry in this table is used to set the attributes for a matching EXP bits for a inbound/outbound direction for a
I32 csExpFilterIfExpValue	1.3.6.1.4.1.3085.3.1.6.14.2.3.1.3	Integer32	read-create	The EXP value to set to.
I32 csExpFilterIfMatchingExp	1.3.6.1.4.1.3085.3.1.6.14.2.3.1.2	Integer32	not-accessible	The EXP value to filter.
ROW csExpFilterIfRowStatus	1.3.6.1.4.1.3085.3.1.6.14.2.3.1.7	RowStatus	read-create	A row status type for this table
INT csExpFilterIfServiceCategory	1.3.6.1.4.1.3085.3.1.6.14.2.3.1.4	INTEGER	read-create	Used to assign service category.
csExpFilterIfTable	1.3.6.1.4.1.3085.3.1.6.14.2.3		not-accessible	This table is used to filter MPLS EXP bits.
I32 csExpFilterMatchingExp	1.3.6.1.4.1.3085.3.1.6.14.2.1.1.2	Integer32	not-accessible	The EXP value to filter.
ROW csExpFilterRowStatus	1.3.6.1.4.1.3085.3.1.6.14.2.1.1.7	RowStatus	read-create	A row status type for this table
INT csExpFilterServiceCategory	1.3.6.1.4.1.3085.3.1.6.14.2.1.1.4	INTEGER	read-create	The service category to use.
csExpFilterTable	1.3.6.1.4.1.3085.3.1.6.14.2.1		not-accessible	This table is used to filter MPLS EXP bits.
I32 csExpFilterTableEnd	1.3.6.1.4.1.3085.3.1.6.14.2.2	Integer32	read-only	End of this group. value undefined
INT csExpPolAction	1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.10	INTEGER	read-create	The action to perform on packets matching this policy.
I32 csExpPolBgpAS	1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.6	Integer32	read-create	If a route was added via BGP, this object is the AS number of the BGP peer. The value -1 represents a wildcard for this Import Policy parameter.
I32 csExpPolBgpCommunity1	1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.13	Integer32	read-create	The BGP Community parameter 1. Refer to RFC1997. The following values are not allowed in the configuration: 0 through 0x0000FFFF and 0xFFFF0000 through 0xFFFFFFFF. But the following values are allowed within that range: 0xFFFF FF01 (NO-EXPORT) 0xFFFF FF02 (NO-ADVERTISE) 0xFFFF FF03 (NO-EXPORT-SUB) Note that this value can not be set to 0 unless csExpPolBgpCommunity2 is set to 0.
I32 csExpPolBgpCommunity2	1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.14	Integer32	read-create	Same description as csExpPolBgpCommunity1
I32 csExpPolEgpAS	1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.5	Integer32	read-create	If a route was added via EGP, this object is the AS number of the EGP peer. The value -1 represents a wildcard for this Import Policy parameter.
csExpPolEntry	1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1		not-accessible	Each entry contains information about a single import policy.
I32 csExpPolExtRteTag	1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.7	Integer32	read-create	If the route was added via OSPF External, this is the eter The value -1 represents a wildcard for this Import Policy parameter.
I32 csExpPolGenAclId	1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.2	Integer32	read-create	The identifier of General Access List entry that this Policy uses. The value -1 represents a wildcard for this Import Policy parameter.
I32 csExpPolId	1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.1	Integer32	not-accessible	This object identifies a specific Export Policy entry.
INT csExpPolLevel	1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.17	INTEGER	read-create	To indicate where to import routes, applicable to ISIS and OSPF only. ISISlevel1, ISISlevel2, ISISlevel3 are applicable when you apply export policy for ISIS. OSPFstubarea and OSPFbackbone are applicable when you apply export policy for OSPF.
I32 csExpPolMetric	1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.11	Integer32	read-create	The metric to assign to packets matching this policy. The value -1 indicates this parameter has not been set.
INT csExpPolMetricType	1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.16	INTEGER	read-create	Metric type to be set when exporting route into a protocol. OSPFtype1 and OSPFtype2 are only applicable for OSPF. ISISinternal and ISISexternal are only applicable for ISIS.
I32 csExpPolPeerAS	1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.3	Integer32	read-create	The target system's autonomous system number. The value -1 represents a wildcard for this Import Policy parameter.
INT csExpPolProtocol	1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.4	INTEGER	read-create	The protocol that has added the route to the routing table.
IP csExpPolRipIp	1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.8	IpAddress	read-create	The value 0.0.0.0 represents a wildcard for this Import Policy parameter.
IP csExpPolRipNbrIp	1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.9	IpAddress	read-create	The value 0.0.0.0 represents a wildcard for this Import Policy parameter.
INT csExpPolRouteType	1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.15	INTEGER	read-create	RouteType to be matched when exporting ISIS/OSPF route into another protocol. ISISlevel1, ISISlevel2 and ISISlevel12 can be set if csExpPolProtocol is set to ISIS. OSPFinternal, OSPFexternal, OSPFexternal1 and OSPFexternal2 can be set if csExpPolProtocol is set to OSPF
ROW csExpPolRowStatus	1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.12	RowStatus	read-create	The RowStatus object for this table. This is used to add/delete rows from this table.
csExpPolTable	1.3.6.1.4.1.3085.3.1.4.2.1.2.2		not-accessible	This table is used to configure the export policies stored on a virtual router. Once configured, these policies can be applied to any routing protocol.
I32 csExpPolTableEnd	1.3.6.1.4.1.3085.3.1.4.2.1.2.3	Integer32	read-only	End of this group. value undefined
INT csFrCircitFwdDlciType	1.3.6.1.4.1.3085.3.1.3.4.2.1.23	INTEGER	read-create	Indication of whether the DLCI corresponding to the forward link of this DLCI, is a Frame Relay DLCI or Frame over IP DLCI. Depending on this the csFrCircuitFwdLink object is interpreted differently. When setting a csFrCircuitFwdLink object, this object also must be set.
I32 csFrCircuitCommittedBurst	1.3.6.1.4.1.3085.3.1.3.4.2.1.12	Integer32	read-create	This variable indicates the maximum amount of data, in bits, that the network agrees to transfer under normal conditions, during the measurement interval.
TIM csFrCircuitCreationTime	1.3.6.1.4.1.3085.3.1.3.4.2.1.10	TimeStamp	read-only	The value of sysUpTime when the virtual circuit was created, whether by the Data Link Connection Management Interface or by a SetRequest.
C32 csFrCircuitDiscards	1.3.6.1.4.1.3085.3.1.3.4.2.1.17	Counter32	read-only	The number of inbound frames dropped because of format errors, or because the VC is inactive.
DLC csFrCircuitDlci	1.3.6.1.4.1.3085.3.1.3.4.2.1.2	DLCI	read-create	The Data Link Connection Identifier for this virtual circuit. Note, this impelemtation supports only values between 16 and 1023 (inclusive).
csFrCircuitEntry	1.3.6.1.4.1.3085.3.1.3.4.2.1		not-accessible	The information regarding a single Data Link Connection. Discontinuities in the counters contained in this table are indicated by the value in csFrCircuitCreationTime.
I32 csFrCircuitExcessBurst	1.3.6.1.4.1.3085.3.1.3.4.2.1.13	Integer32	read-create	This variable indicates the maximum amount of uncommitted data bits that the network will attempt to deliver over the measurement interval.
OCT csFrCircuitFwdLink	1.3.6.1.4.1.3085.3.1.3.4.2.1.24	OCTET STRING	read-create	The forwarding link of this DLCI. This is a switching parameters for intra blade and inter-blade switching. It takes the following format: If csFrCircitFwdDlciType is frDlci byte #0 to #3 : Slot number (csFrDlcmiSlot) byte #4 to #7 : Port number (csFrDlcmiPort) byte #8 to #11 : Channel number (csFrDlcmiChannel, zero for unchannelized blade) byte #12 to #15: DLCI number (csFrCircuitDlci) If csFrCircitFwdDlciType is froipDlci byte #0 to #3 : VPN Id (csOrionGlobalVPNIndex) byte #4 to #7 : VR Id (csOrionVPNVRouterIndex) byte #8 to #11 : Transport Id (csOrionFRoIPTransportPeer) byte #12 to #15: DLCI number (csFroIPCircuitDlci) NOTE: all zero indicates that this DLCI is not connected to any link.
TIM csFrCircuitLastTimeChange	1.3.6.1.4.1.3085.3.1.3.4.2.1.11	TimeStamp	read-only	The value of sysUpTime when last there was a change in the virtual circuit state
INT csFrCircuitMulticast	1.3.6.1.4.1.3085.3.1.3.4.2.1.15	INTEGER	read-only	This indicates whether this VC is used as a unicast VC (i.e. not multicast) or the type of multicast service subscribed to
OPE csFrCircuitOperStatus	1.3.6.1.4.1.3085.3.1.3.4.2.1.22	OperStatus	read-only	The operational status of this circuit.
INT csFrCircuitRatePolice	1.3.6.1.4.1.3085.3.1.3.4.2.1.25	INTEGER	read-create	This object enables or disables ingress traffic rate-policing. Ingress rate-policing is controlled by the values configured for csFrCircuitThroughput, csFrCircuitCommitedBurst and CsFrCircuitExcessBurst. If the number of bits received in the measurement interval is less than or equal to the committed burst size, the frame is forwared for further processing. If the number of bits received in the measurement interval is greater than the commited burst size but less than the sum of commited burst size and excess burst size, the DE bit is set in the frame and then forwared for further processing. If the number of bits received in the measurement interval is greater than the sum of commited burst size and excess burst size, the frame is dropped.
C32 csFrCircuitReceivedBECNs	1.3.6.1.4.1.3085.3.1.3.4.2.1.5	Counter32	read-only	Number of frames received from the network indicating backward congestion since the virtual circuit was created. This occurs when the remote DTE sets the BECN flag, or when a switch in the network receives the frame from a trunk whose transmission queue is congested.
C32 csFrCircuitReceivedDEs	1.3.6.1.4.1.3085.3.1.3.4.2.1.18	Counter32	read-only	Number of frames received from the network indicating that they were eligible for discard since the virtual circuit was created. This occurs when the remote DTE sets the DE flag, or when in remote DTE's switch detects that the frame was received as Excess Burst data.
C32 csFrCircuitReceivedFECNs	1.3.6.1.4.1.3085.3.1.3.4.2.1.4	Counter32	read-only	Number of frames received from the network indicating forward congestion since the virtual circuit was created. This occurs when the remote DTE sets the FECN flag, or when a switch in the network enqueues the frame to a trunk whose transmission queue is congested.
C32 csFrCircuitReceivedFrames	1.3.6.1.4.1.3085.3.1.3.4.2.1.8	Counter32	read-only	Number of frames received over this virtual circuit since it was created.
C32 csFrCircuitReceivedOctets	1.3.6.1.4.1.3085.3.1.3.4.2.1.9	Counter32	read-only	Number of octets received over this virtual circuit since it was created. Octets counted include the full frame relay header, but do not include the flag characters or the CRC.
IP csFrCircuitRemoteIpAddress	1.3.6.1.4.1.3085.3.1.3.4.2.1.20	IpAddress	read-create	The remote IP address mapped to this VC.
ROW csFrCircuitRowStatus	1.3.6.1.4.1.3085.3.1.3.4.2.1.21	RowStatus	read-create	This object is used to create a new row or modify or destroy an existing row in the manner described in the definition of the RowStatus textual convention. Writable objects in the table may be written in any RowStatus state.
C32 csFrCircuitSentDEs	1.3.6.1.4.1.3085.3.1.3.4.2.1.19	Counter32	read-only	Number of frames sent to the network indicating that they were eligible for discard since the virtual circuit was created. This occurs when the local DTE sets the DE flag, indicating that during Network congestion situations those frames should be discarded in preference of other frames sent without the DE bit set.
C32 csFrCircuitSentFrames	1.3.6.1.4.1.3085.3.1.3.4.2.1.6	Counter32	read-only	The number of frames sent from this virtual circuit since it was created.
C32 csFrCircuitSentOctets	1.3.6.1.4.1.3085.3.1.3.4.2.1.7	Counter32	read-only	The number of octets sent from this virtual circuit since it was created. Octets counted are the full frame relay header and the payload, but do not include the flag characters or CRC.
INT csFrCircuitState	1.3.6.1.4.1.3085.3.1.3.4.2.1.3	INTEGER	read-create	Indicates whether the particular virtual circuit is operational. In the absence of a Data Link Connection Management Interface, virtual circuit entries (rows) may be created by setting virtual circuit state to 'active', or deleted by changing Circuit state to 'invalid'. Whether or not the row actually disappears is left to the implementation, so this object may actually read as 'invalid' for some arbitrary length of time. It is also legal to set the state of a virtual circuit to 'inactive' to temporarily disable a given circuit. The use of 'invalid' is deprecated in this SNMP Version 2 MIB, in favor of csFrCircuitRowStatus.
I32 csFrCircuitSubIf	1.3.6.1.4.1.3085.3.1.3.4.2.1.1	Integer32	not-accessible	The identifier for this Frame Relay Circuit. This corresponds to the 'subinterface' entered via the CLI.
csFrCircuitTable	1.3.6.1.4.1.3085.3.1.3.4.2		not-accessible	A table containing information about specific Data Link Connections (DLC) or virtual circuits.
I32 csFrCircuitThroughput	1.3.6.1.4.1.3085.3.1.3.4.2.1.14	Integer32	read-create	Throughput is the average number of 'Frame Relay Information Field' bits transferred per second across a user network interface in one direction, measured over the measurement interval. If the configured committed burst size and throughput are both non-zero, the measurement interval, T, is T=csFrCircuitCommittedBurst/csFrCircuitThroughput. If the configured committed burst size and throughput are both zero, the measurement interval, T, is T=csFrCircuitExcessBurst/ifSpeed.
INT csFrCircuitType	1.3.6.1.4.1.3085.3.1.3.4.2.1.16	INTEGER	read-only	Indication of whether the VC was manually created (static), or dynamically created (dynamic) via the data link control management interface.
INT csFrCircuitUpperProtocol	1.3.6.1.4.1.3085.3.1.3.4.2.1.26	INTEGER	read-create	This object is used to set the upper protocol. For PPP over FR this is set to 'ppp'. NOTE: This object cannot be set to 'ip'. Only when a VI is connected to this interface that it becomes 'ip'.
INT csFrDlcmiAddress	1.3.6.1.4.1.3085.3.1.3.4.1.1.6	INTEGER	read-only	This variable states which address format is in use on the Frame Relay interface.
INT csFrDlcmiAddressLen	1.3.6.1.4.1.3085.3.1.3.4.1.1.7	INTEGER	read-only	This variable states the address length in octets. In the case of Q922 format, the length indicates the entire length of the address including the control portion.
INT csFrDlcmiAsyncEnabled	1.3.6.1.4.1.3085.3.1.3.4.1.1.23	INTEGER	read-write	.
INT csFrDlcmiBECNFlowControl	1.3.6.1.4.1.3085.3.1.3.4.1.1.16	INTEGER	read-write	This object enables or disables the BECN flow control.
I32 csFrDlcmiChannel	1.3.6.1.4.1.3085.3.1.3.4.1.1.4	Integer32	not-accessible	This table entry configures Frame Relay Dlcmi-specific parameters for a single interface. The interface is identified by the slot its blade resides in, the physical port on that blade that contains the interface, and (if applicable) the specific DS3 channel on that port. This object is used to identify the Channel. If there is no DS3 channel (or unchannelized), this object should have the value 0.
I32 csFrDlcmiDceN392	1.3.6.1.4.1.3085.3.1.3.4.1.1.20	Integer32	read-write	LMI error threshold. For DCE IF Type. This is the maximum number of unanswered unreceived Status Enquiries the equipment shall accept before declaring the interface down.
I32 csFrDlcmiDceN393	1.3.6.1.4.1.3085.3.1.3.4.1.1.21	Integer32	read-write	LMI monitored event count. For DCE IF Type. This is the number of status polling intervals over which the error threshold is counted.
I32 csFrDlcmiDceT392	1.3.6.1.4.1.3085.3.1.3.4.1.1.22	Integer32	read-write	LMI monitored event count. For DCE IF Type. This indicates the expected number of seconds between heartbeat polls.
csFrDlcmiEntry	1.3.6.1.4.1.3085.3.1.3.4.1.1		not-accessible	The Parameters for a particular Data Link Connection Management Interface.
I32 csFrDlcmiErrorThreshold	1.3.6.1.4.1.3085.3.1.3.4.1.1.10	Integer32	read-write	This is the maximum number of unanswered Status Enquiries the equipment shall accept before declaring the interface down.
I32 csFrDlcmiFullEnquiryInterval	1.3.6.1.4.1.3085.3.1.3.4.1.1.9	Integer32	read-write	Number of status enquiry intervals that pass before issuance of a full status enquiry message.
INT csFrDlcmiIfType	1.3.6.1.4.1.3085.3.1.3.4.1.1.15	INTEGER	read-write	This indicates the type of interface.
INT csFrDlcmiInjectionManagement	1.3.6.1.4.1.3085.3.1.3.4.1.1.17	INTEGER	read-write	.
DLC csFrDlcmiLmiDlci	1.3.6.1.4.1.3085.3.1.3.4.1.1.19	DLCI	read-write	The DLCI of the LMI for this interface.
DLC csFrDlcmiMaxSupportedVCs	1.3.6.1.4.1.3085.3.1.3.4.1.1.12	DLCI	read-only	The maximum number of Virtual Circuits allowed for this interface. Usually dictated by the Frame Relay network. In response to a SET, if a value less than zero or higher than the agent's maximal capability is configured, the agent should respond badValue
I32 csFrDlcmiModule	1.3.6.1.4.1.3085.3.1.3.4.1.1.2	Integer32	not-accessible	This table entry configures Frame Relay Dlcmi-specific parameters for a single interface. The interface is identified by the slot its blade resides in, the moduel, the port on that blade that contains the interface, and (if applicable) the specific DS3 channel on that port. This object is used to identify the Port.
I32 csFrDlcmiMonitoredEvents	1.3.6.1.4.1.3085.3.1.3.4.1.1.11	Integer32	read-write	This is the number of status polling intervals over which the error threshold is counted. For example, if within 'MonitoredEvents' number of events the station receives 'ErrorThreshold' number of errors, the interface is marked as down.
INT csFrDlcmiMulticast	1.3.6.1.4.1.3085.3.1.3.4.1.1.13	INTEGER	read-only	This indicates whether the Frame Relay interface is using a multicast service.
STR csFrDlcmiName	1.3.6.1.4.1.3085.3.1.3.4.1.1.18	DisplayString	read-write	.
I32 csFrDlcmiPollingInterval	1.3.6.1.4.1.3085.3.1.3.4.1.1.8	Integer32	read-write	This is the number of seconds between successive status enquiry messages.
I32 csFrDlcmiPort	1.3.6.1.4.1.3085.3.1.3.4.1.1.3	Integer32	not-accessible	This table entry configures Frame Relay Dlcmi-specific parameters for a single interface. The interface is identified by the slot its blade resides in, the physical port on that blade that contains the interface, and (if applicable) the specific DS3 channel on that port. This object is used to identify the Port.
I32 csFrDlcmiSlot	1.3.6.1.4.1.3085.3.1.3.4.1.1.1	Integer32	not-accessible	This table entry configures Frame Relay Dlcmi-specific parameters for a single interface. The interface is identified by the slot its blade resides in, the physical port on that blade that contains the interface, and (if applicable) the specific DS3 channel on that port. This object is used to identify the Slot.
C32 csFrDlcmiStatAsyncUpdates	1.3.6.1.4.1.3085.3.1.3.4.4.1.5	Counter32	read-only	Number of times the Asyn Update is made.
INT csFrDlcmiState	1.3.6.1.4.1.3085.3.1.3.4.1.1.5	INTEGER	read-write	This variable states which Data Link Connection Management scheme is active (and by implication, what DLCI it uses) on the Frame Relay interface.
csFrDlcmiStatEntry	1.3.6.1.4.1.3085.3.1.3.4.4.1		not-accessible	The statistics information for a single frame relay interface.
C32 csFrDlcmiStatFullStatusEnquiries	1.3.6.1.4.1.3085.3.1.3.4.4.1.2	Counter32	read-only	Number of times the Full Status Equiry is sent.
C32 csFrDlcmiStatFullStatusResponses	1.3.6.1.4.1.3085.3.1.3.4.4.1.4	Counter32	read-only	Number of times the Full Status Response is received.
C32 csFrDlcmiStatLocalSequenceNumber	1.3.6.1.4.1.3085.3.1.3.4.4.1.9	Counter32	read-only	The local sequence number.
C32 csFrDlcmiStatLostSequences	1.3.6.1.4.1.3085.3.1.3.4.4.1.7	Counter32	read-only	Number of times the Lost Sequence is encountered.
C32 csFrDlcmiStatMissingResponses	1.3.6.1.4.1.3085.3.1.3.4.4.1.8	Counter32	read-only	Number of times the Missing Response is encountered.
C32 csFrDlcmiStatNetSequenceNumber	1.3.6.1.4.1.3085.3.1.3.4.4.1.10	Counter32	read-only	The network sequence number.
C32 csFrDlcmiStatStatusEnquiries	1.3.6.1.4.1.3085.3.1.3.4.4.1.1	Counter32	read-only	Number of times the Status Equiry is sent.
C32 csFrDlcmiStatStatusResponses	1.3.6.1.4.1.3085.3.1.3.4.4.1.3	Counter32	read-only	Number of times the Status Response is received.
csFrDlcmiStatTable	1.3.6.1.4.1.3085.3.1.3.4.4		not-accessible	A table containing information about the statistics on every DLCMI.
C32 csFrDlcmiStatUnknownMessages	1.3.6.1.4.1.3085.3.1.3.4.4.1.6	Counter32	read-only	Number of times the Unknown Messages is encountered.
INT csFrDlcmiStatus	1.3.6.1.4.1.3085.3.1.3.4.1.1.14	INTEGER	read-only	This indicates the status of the Frame Relay interface as determined by the performance of the dlcmi. If no dlcmi is running, the Frame Relay interface will stay in the running state indefinitely.
csFrDlcmiTable	1.3.6.1.4.1.3085.3.1.3.4.1		not-accessible	The Parameters for the Data Link Connection Management Interface for the frame relay service on this interface.
OCT csFrErrData	1.3.6.1.4.1.3085.3.1.3.4.3.1.2	OCTET STRING	read-only	An octet string containing as much of the error packet as possible. As a minimum, it must contain the Q.922 Address or as much as was delivered. It is desirable to include all header and demultiplexing information.
csFrErrEntry	1.3.6.1.4.1.3085.3.1.3.4.3.1		not-accessible	The error information for a single frame relay interface.
C32 csFrErrFaults	1.3.6.1.4.1.3085.3.1.3.4.3.1.4	Counter32	read-only	The number of times the interface has gone down since it was initialized.
TIM csFrErrFaultTime	1.3.6.1.4.1.3085.3.1.3.4.3.1.5	TimeStamp	read-only	The value of sysUpTime at the time when the interface was taken down due to excessive errors. Excessive errors is defined as the time when a DLCMI exceeds the frDlcmiErrorThreshold number of errors within frDlcmiMonitoredEvents. See FrDlcmiEntry for further details.
csFrErrTable	1.3.6.1.4.1.3085.3.1.3.4.3		not-accessible	A table containing information about Errors on the Frame Relay interface. Discontinuities in the counters contained in this table are the same as apply to the ifEntry associated with the Interface.
TIM csFrErrTime	1.3.6.1.4.1.3085.3.1.3.4.3.1.3	TimeStamp	read-only	The value of sysUpTime at which the error was detected.
INT csFrErrType	1.3.6.1.4.1.3085.3.1.3.4.3.1.1	INTEGER	read-only	The type of error that was last seen on this interface: receiveShort: frame was not long enough to allow demultiplexing - the address field was incomplete, or for virtual circuits using Multiprotocol over Frame Relay, the protocol identifier was missing or incomplete. receiveLong: frame exceeded maximum length configured for this interface. illegalAddress: address field did not match configured format. unknownAddress: frame received on a virtual circuit which was not active or administratively disabled. dlcmiProtoErr: unspecified error occurred when attempting to interpret link maintenance frame. dlcmiUnknownIE: link maintenance frame contained an Information Element type which is not valid for the configured link maintenance protocol. dlcmiSequenceErr: link maintenance frame contained a sequence number other than the expected value. dlcmiUnknownRpt: link maintenance frame contained a Report Type Information Element whose value was not valid for the configured link maintenance protocol. noErrorSinceReset: no errors have been detected since the last cold start or warm start.
I32 csFRoIPCircuitCommittedBurst	1.3.6.1.4.1.3085.3.1.6.12.3.1.11	Integer32	read-create	This variable indicates the maximum amount of data, in bits, that the network agrees to transfer under normal conditions, during the measurement interval.
TIM csFRoIPCircuitCreationTime	1.3.6.1.4.1.3085.3.1.6.12.3.1.9	TimeStamp	read-only	The value of sysUpTime when the virtual circuit was created, whether by the Data Link Connection Management Interface or by a SetRequest.
C32 csFRoIPCircuitDiscards	1.3.6.1.4.1.3085.3.1.6.12.3.1.16	Counter32	read-only	The number of inbound frames dropped because of format errors, or because the VC is inactive.
DLC csFRoIPCircuitDlci	1.3.6.1.4.1.3085.3.1.6.12.3.1.1	DLCI	not-accessible	The Data Link Connection Identifier for this virtual circuit. Note, this impelemtation supports only values between 16 and 1023 (inclusive).
csFRoIPCircuitEntry	1.3.6.1.4.1.3085.3.1.6.12.3.1		not-accessible	The information regarding a single Data Link Connection. Discontinuities in the counters contained in this table are indicated by the value in csFrCircuitCreationTime.
I32 csFRoIPCircuitExcessBurst	1.3.6.1.4.1.3085.3.1.6.12.3.1.12	Integer32	read-create	This variable indicates the maximum amount of uncommitted data bits that the network will attempt to deliver over the measurement interval. By default, if not configured when creating the entry, the Excess Information Burst Size is set to the value of ifSpeed.
OCT csFRoIPCircuitFwdLink	1.3.6.1.4.1.3085.3.1.6.12.3.1.21	OCTET STRING	read-create	The forwarding link of this DLCI. This is a switching parameters for intra blade and inter-blade switching. It takes the following format: byte #0 to #3 : Slot number (csFRoIPDlcmiSlot) byte #4 to #7 : Port number (csFRoIPDlcmiPort) byte #8 to #11 : Channel number (csFRoIPDlcmiChannel, zero for unchannelized blade) byte #12 to #15: DLCI number (csFRoIPCircuitDlci) NOTE: all zero indicates that this DLCI is not connected to any link.
TIM csFRoIPCircuitLastTimeChange	1.3.6.1.4.1.3085.3.1.6.12.3.1.10	TimeStamp	read-only	The value of sysUpTime when last there was a change in the virtual circuit state
INT csFRoIPCircuitMulticast	1.3.6.1.4.1.3085.3.1.6.12.3.1.14	INTEGER	read-only	This indicates whether this VC is used as a unicast VC (i.e. not multicast) or the type of multicast service subscribed to
OPE csFRoIPCircuitOperStatus	1.3.6.1.4.1.3085.3.1.6.12.3.1.20	OperStatus	read-only	The operational status of this circuit.
C32 csFRoIPCircuitReceivedBECNs	1.3.6.1.4.1.3085.3.1.6.12.3.1.4	Counter32	read-only	Number of frames received from the network indicating backward congestion since the virtual circuit was created. This occurs when the remote DTE sets the BECN flag, or when a switch in the network receives the frame from a trunk whose transmission queue is congested.
C32 csFRoIPCircuitReceivedDEs	1.3.6.1.4.1.3085.3.1.6.12.3.1.17	Counter32	read-only	Number of frames received from the network indicating that they were eligible for discard since the virtual circuit was created. This occurs when the remote DTE sets the DE flag, or when in remote DTE's switch detects that the frame was received as Excess Burst data.
C32 csFRoIPCircuitReceivedFECNs	1.3.6.1.4.1.3085.3.1.6.12.3.1.3	Counter32	read-only	Number of frames received from the network indicating forward congestion since the virtual circuit was created. This occurs when the remote DTE sets the FECN flag, or when a switch in the network enqueues the frame to a trunk whose transmission queue is congested.
C32 csFRoIPCircuitReceivedFrames	1.3.6.1.4.1.3085.3.1.6.12.3.1.7	Counter32	read-only	Number of frames received over this virtual circuit since it was created.
C32 csFRoIPCircuitReceivedOctets	1.3.6.1.4.1.3085.3.1.6.12.3.1.8	Counter32	read-only	Number of octets received over this virtual circuit since it was created. Octets counted include the full frame relay header, but do not include the flag characters or the CRC.
ROW csFRoIPCircuitRowStatus	1.3.6.1.4.1.3085.3.1.6.12.3.1.19	RowStatus	read-create	This object is used to create a new row or modify or destroy an existing row in the manner described in the definition of the RowStatus textual convention. Writable objects in the table may be written in any RowStatus state.
C32 csFRoIPCircuitSentDEs	1.3.6.1.4.1.3085.3.1.6.12.3.1.18	Counter32	read-only	Number of frames sent to the network indicating that they were eligible for discard since the virtual circuit was created. This occurs when the local DTE sets the DE flag, indicating that during Network congestion situations those frames should be discarded in preference of other frames sent without the DE bit set.
C32 csFRoIPCircuitSentFrames	1.3.6.1.4.1.3085.3.1.6.12.3.1.5	Counter32	read-only	The number of frames sent from this virtual circuit since it was created.
C32 csFRoIPCircuitSentOctets	1.3.6.1.4.1.3085.3.1.6.12.3.1.6	Counter32	read-only	The number of octets sent from this virtual circuit since it was created. Octets counted are the full frame relay header and the payload, but do not include the flag characters or CRC.
INT csFRoIPCircuitState	1.3.6.1.4.1.3085.3.1.6.12.3.1.2	INTEGER	read-create	Indicates whether the particular virtual circuit is operational. In the absence of a Data Link Connection Management Interface, virtual circuit entries (rows) may be created by setting virtual circuit state to 'active', or deleted by changing Circuit state to 'invalid'. Whether or not the row actually disappears is left to the implementation, so this object may actually read as 'invalid' for some arbitrary length of time. It is also legal to set the state of a virtual circuit to 'inactive' to temporarily disable a given circuit. The use of 'invalid' is deprecated in this SNMP Version 2 MIB, in favor of csFRoIPCircuitRowStatus.
csFRoIPCircuitTable	1.3.6.1.4.1.3085.3.1.6.12.3		not-accessible	A table containing information about virtual circuits corresponding to FRoIP Transports..
I32 csFRoIPCircuitTableEnd	1.3.6.1.4.1.3085.3.1.6.12.4	Integer32	read-only	End of this group. value undefined
I32 csFRoIPCircuitThroughput	1.3.6.1.4.1.3085.3.1.6.12.3.1.13	Integer32	read-create	Throughput is the average number of 'Frame Relay Information Field' bits transferred per second across a user network interface in one direction, measured over the measurement interval. If the configured committed burst rate and throughput are both non-zero, the measurement interval, T, is T=csFRoIPCircuitCommittedBurst/csFRoIPCircuitThroughput. If the configured committed burst rate and throughput are both zero, the measurement interval, T, is T=csFRoIPCircuitExcessBurst/ifSpeed.
INT csFRoIPCircuitType	1.3.6.1.4.1.3085.3.1.6.12.3.1.15	INTEGER	read-only	Indication of whether the VC was manually created (static), or dynamically created (dynamic) via the data link control management interface.
IP csIgmpAccessGroupAddress	1.3.6.1.4.1.3085.3.1.4.2.13.1.4.1.2	IpAddress	not-accessible	The IP multicast group address which corresponds to the configured access group.
csIgmpAccessGroupEntry	1.3.6.1.4.1.3085.3.1.4.2.13.1.4.1		not-accessible	An entry (conceptual row) in the csIgmpAccessGroupTable.
NUM csIgmpAccessGroupIfIndex	1.3.6.1.4.1.3085.3.1.4.2.13.1.4.1.1	InterfaceIndex	not-accessible	The interface for which the access group has been configured.
ROW csIgmpAccessGroupStatus	1.3.6.1.4.1.3085.3.1.4.2.13.1.4.1.3	RowStatus	read-create	The activation of a row enables a access group configuration on the interface. The destruction of a row disables the access group configuration on the interface.
csIgmpAccessGroupTable	1.3.6.1.4.1.3085.3.1.4.2.13.1.4		not-accessible	The (conceptual) table listing the IP multicast access groups to which traffic needs to be sent to or rejected from. This table will usually be used to reject traffic to a particular set of multicast groups
IP csIgmpCacheAddress	1.3.6.1.4.1.3085.3.1.4.2.13.1.2.1.1	IpAddress	not-accessible	The IP multicast group address for which this entry contains information.
csIgmpCacheEntry	1.3.6.1.4.1.3085.3.1.4.2.13.1.2.1		not-accessible	An entry (conceptual row) in the csIgmpCacheTable.
TIK csIgmpCacheExpiryTime	1.3.6.1.4.1.3085.3.1.4.2.13.1.2.1.6	TimeTicks	read-only	The minimum amount of time remaining before this entry will be aged out. A value of 0 indicates that the entry is only present because csIgmpCacheSelf is true and that if the router left the group, this entry would be aged out immediately. Note that some implementations may process membership reports from the local system in the same way as reports from other hosts, so a value of 0 is not required.
NUM csIgmpCacheIfIndex	1.3.6.1.4.1.3085.3.1.4.2.13.1.2.1.2	InterfaceIndex	not-accessible	The interface for which this entry contains information for an IP multicast group address.
IP csIgmpCacheLastReporter	1.3.6.1.4.1.3085.3.1.4.2.13.1.2.1.4	IpAddress	read-only	The IP address of the source of the last membership report received for this IP Multicast group address on this interface. If no membership report has been received, this object has the value 0.0.0.0.
T/F csIgmpCacheSelf	1.3.6.1.4.1.3085.3.1.4.2.13.1.2.1.3	TruthValue	read-create	An indication of whether the local system is a member of this group address on this interface.
ROW csIgmpCacheStatus	1.3.6.1.4.1.3085.3.1.4.2.13.1.2.1.7	RowStatus	read-create	The status of this entry.
csIgmpCacheTable	1.3.6.1.4.1.3085.3.1.4.2.13.1.2		not-accessible	The (conceptual) table listing the IP multicast groups for which there are members on a particular interface.
TIK csIgmpCacheUpTime	1.3.6.1.4.1.3085.3.1.4.2.13.1.2.1.5	TimeTicks	read-only	The time elapsed since this entry was created.
TIK csIgmpCacheVersion1HostTimer	1.3.6.1.4.1.3085.3.1.4.2.13.1.2.1.8	TimeTicks	read-only	The time remaining until the local router will assume that there are no longer any IGMP version 1 members on the IP subnet attached to this interface. Upon hearing any IGMPv1 Membership Report, this value is reset to the group membership timer. While this time remaining is non-zero, the local router ignores any IGMPv2 Leave messages for this group that it receives on this interface.
csIgmpGeneralEntry	1.3.6.1.4.1.3085.3.1.4.2.13.1.5.1		not-accessible	Information regarding the router level attributes of IGMP.
ROW csIgmpGeneralEntryRowStatus	1.3.6.1.4.1.3085.3.1.4.2.13.1.5.1.1	RowStatus	read-create	The activation of a row enables an IGMP object for the router. The destruction of a row destroys the IGMP object for this router.
csIgmpGeneralTable	1.3.6.1.4.1.3085.3.1.4.2.13.1.5		not-accessible	MIB object to control router level attributes of IGMP.
INT csIgmpInterfaceAdminStatus	1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.17	INTEGER	read-create	This attribute controls the enable/disable settings of an IGMP or IGMP Proxy interface. If this attribute is set to disable, the interface configuration will be saved.
csIgmpInterfaceEntry	1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1		not-accessible	An entry (conceptual row) representing an interface on which IGMP is enabled.
G32 csIgmpInterfaceGroups	1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.13	Gauge32	read-only	The current number of entries for this interface in the Cache Table.
NUM csIgmpInterfaceIfIndex	1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.1	InterfaceIndex	not-accessible	The ifIndex value of the interface for which IGMP is enabled.
C32 csIgmpInterfaceJoins	1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.11	Counter32	read-only	The number of times a group membership has been added on this interface; that is, the number of times an entry for this interface has been added to the Cache Table. This object gives an indication of the amount of IGMP activity over the lifetime of the row entry.
U32 csIgmpInterfaceLastMembQueryIntvl	1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.15	Unsigned32	read-create	The Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages. This value may be tuned to modify the leave latency of the network. A reduced value results in reduced time to detect the loss of the last member of a group. The value of this object is irrelevant if csIgmpInterfaceVersion is 1.
U32 csIgmpInterfaceMulticastTTLThreshold	1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.16	Unsigned32	read-create	The Multicast TTL threshold value to be used by IGMP forwarding. This value is used to contol multicast packets from going beyone a certain number of routers.
NUM csIgmpInterfaceProxyIfIndex	1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.12	InterfaceIndexOrZero	read-create	Some devices implement a form of IGMP proxying whereby memberships learned on the interface represented by this row, cause IGMP Host Membership Reports to be sent on the interface whose ifIndex value is given by this object. Such a device would implement the csIgmpV2RouterMIBGroup only on its router interfaces (those interfaces with non-zero csIgmpInterfaceProxyIfIndex). Typically, the value of this object is 0, indicating that no proxying is being done.
IP csIgmpInterfaceQuerier	1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.5	IpAddress	read-only	The address of the IGMP Querier on the IP subnet to which this interface is attached.
TIK csIgmpInterfaceQuerierExpiryTime	1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.8	TimeTicks	read-only	The amount of time remaining before the Other Querier Present Timer expires. If the local system is the querier, the value of this object is zero.
TIK csIgmpInterfaceQuerierUpTime	1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.7	TimeTicks	read-only	The time since csIgmpInterfaceQuerier was last changed.
U32 csIgmpInterfaceQueryInterval	1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.2	Unsigned32	read-create	The frequency at which IGMP Host-Query packets are transmitted on this interface.
U32 csIgmpInterfaceQueryMaxResponseTime	1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.6	Unsigned32	read-create	The maximum query response time advertised in IGMPv2 queries on this interface.
U32 csIgmpInterfaceRobustness	1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.14	Unsigned32	read-create	The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. IGMP is robust to (Robustness Variable-1) packet losses.
ROW csIgmpInterfaceStatus	1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.3	RowStatus	read-create	The activation of a row enables IGMP on the interface. The destruction of a row disables IGMP on the interface.
csIgmpInterfaceTable	1.3.6.1.4.1.3085.3.1.4.2.13.1.1		not-accessible	The (conceptual) table listing the interfaces on which IGMP is enabled.
U32 csIgmpInterfaceVersion	1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.4	Unsigned32	read-create	The version of IGMP which is running on this interface. This object can be used to configure a router capable of running either value. For IGMP to function correctly, all routers on a LAN must be configured to run the same version of IGMP on that LAN.
TIK csIgmpInterfaceVersion1QuerierTimer	1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.9	TimeTicks	read-only	The time remaining until the host assumes that there are no IGMPv1 routers present on the interface. While this is non- zero, the host will reply to all queries with version 1 membership reports.
C32 csIgmpInterfaceWrongVersionQueries	1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.10	Counter32	read-only	The number of queries received whose IGMP version does not match csIgmpInterfaceVersion, over the lifetime of the row entry. IGMP requires that all routers on a LAN be configured to run the same version of IGMP. Thus, if any queries are received with the wrong version, this indicates a configuration error.
csIgmpMIBObjects	1.3.6.1.4.1.3085.3.1.4.2.13.1
IP csIgmpStaticGroupAddress	1.3.6.1.4.1.3085.3.1.4.2.13.1.3.1.2	IpAddress	not-accessible	The IP multicast group address which corresponds to the configured static group.
csIgmpStaticGroupEntry	1.3.6.1.4.1.3085.3.1.4.2.13.1.3.1		not-accessible	An entry (conceptual row) in the csIgmpStaticGroupTable.
NUM csIgmpStaticGroupIfIndex	1.3.6.1.4.1.3085.3.1.4.2.13.1.3.1.1	InterfaceIndex	not-accessible	The interface for which the static group has been configured.
ROW csIgmpStaticGroupStatus	1.3.6.1.4.1.3085.3.1.4.2.13.1.3.1.3	RowStatus	read-create	The activation of a row enables a static group configuration on the interface. The destruction of a row disables the static group configuration on the interface.
csIgmpStaticGroupTable	1.3.6.1.4.1.3085.3.1.4.2.13.1.3		not-accessible	The (conceptual) table listing the IP multicast static groups to which traffic needs to be sent to even if IGMP is not enabled on the respective interface.
INT csImpPolAction	1.3.6.1.4.1.3085.3.1.4.2.1.2.1.1.6	INTEGER	read-create	The action to take on routes that match this policy.
I32 csImpPolBgpCommunity1	1.3.6.1.4.1.3085.3.1.4.2.1.2.1.1.9	Integer32	read-create	The BGP Community parameter 1. Refer to RFC1997. The following values are not allowed in the configuration: 0 through 0x0000FFFF and 0xFFFF0000 through 0xFFFFFFFF.
csImpPolEntry	1.3.6.1.4.1.3085.3.1.4.2.1.2.1.1		not-accessible	Each entry contains information about a single import policy.
I32 csImpPolGenAclId	1.3.6.1.4.1.3085.3.1.4.2.1.2.1.1.2	Integer32	read-create	The identifier of General Access List entry that this Policy uses. The value -1 represents a wildcard for this Import Policy parameter.
I32 csImpPolHomeAS	1.3.6.1.4.1.3085.3.1.4.2.1.2.1.1.4	Integer32	read-create	Used by BGP, the home autonomous system number of the BGP system originating the update. The value -1 represents a wildcard for this Import Policy parameter.
I32 csImpPolId	1.3.6.1.4.1.3085.3.1.4.2.1.2.1.1.1	Integer32	not-accessible	This object identifies a specific Import Policy entry.
INT csImpPolOrigin	1.3.6.1.4.1.3085.3.1.4.2.1.2.1.1.5	INTEGER	read-create	Used by BGP, the origin type as placed in the AS path by the originator of the update. The origin could be IGP (the route was learned from an internal gateway protocol), EGP (the route was learned via an exterior gateway protocol) or unknown (the origin of the route cannot be determined). any (signal policy module to ignore this value) The value egp is deprecated.
I32 csImpPolPeerAS	1.3.6.1.4.1.3085.3.1.4.2.1.2.1.1.3	Integer32	read-create	Used by BGP, the autonomous system number of the remote peer. The value -1 represents a wildcard for this Import Policy parameter.
I32 csImpPolPreference	1.3.6.1.4.1.3085.3.1.4.2.1.2.1.1.7	Integer32	read-create	The preference to apply to routes that match this policy. Note, this object only applies to import policies that have a 'permit' action. The value -1 indicates this parameter has not been set.
ROW csImpPolRowStatus	1.3.6.1.4.1.3085.3.1.4.2.1.2.1.1.8	RowStatus	read-create	The RowStatus object for this table. This is used to add/delete rows from this table.
csImpPolTable	1.3.6.1.4.1.3085.3.1.4.2.1.2.1		not-accessible	This table is used to configure the import policies stored on a virtual router. Once configured, these policies can be applied to any routing protocol.
ADR csIsisAreaAddr	1.3.6.1.4.1.3085.3.1.4.2.9.1.3.1.2	OSINSAddress	read-only	An area address reported in a Level 1 LSP received by this instance of the protocol.
csIsisAreaAddrEntry	1.3.6.1.4.1.3085.3.1.4.2.9.1.3.1		not-accessible	Each entry contains one area address reported in a Level 1 LSP received by this instance of the protocol.
I32 csIsisAreaAddrSysInstance	1.3.6.1.4.1.3085.3.1.4.2.9.1.3.1.1	Integer32	not-accessible	The unique identifier of the Integrated IS-IS instance to which this row corresponds.
csIsisAreaAddrTable	1.3.6.1.4.1.3085.3.1.4.2.9.1.3		not-accessible	The union of the sets of area addresses reported in all Level 1 LSPs received by this instance of the protocol.
csIsisCirc	1.3.6.1.4.1.3085.3.1.4.2.9.2
C32 csIsisCircAdjChanges	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.14	Counter32	read-only	The number of times an adjacency state change has occurred on this circuit.
I32 csIsisCircDRL1HelloTimer	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.39	Integer32	read-create	Period, in milliseconds, between Level 1 PDUs on multiaccess networks when this IS is the Designated Intermediate System. This object follows the resettingTimer behaviour.
I32 csIsisCircDRL2HelloTimer	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.40	Integer32	read-create	Period, in milliseconds, between Level 2 PDUs on multiaccess networks when this IS is the Designated Intermediate System. This object follows the resettingTimer behaviour.
csIsisCircEntry	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1		not-accessible	An csIsisCircEntry exists for each circuit used by Integrated IS-IS on this system.
ROW csIsisCircExistState	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.7	RowStatus	read-create	The existence state of this circuit. This object follows the Row Status behaviour.
T/F csIsisCircExtDomain	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.13	TruthValue	read-create	If true, suppress normal transmission of and interpretation of Intra-domain ISIS PDUs on this circuit.
C32 csIsisCircIDFieldLenMismatches	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.19	Counter32	read-only	The number of times an IS-IS control PDU with an ID field length different to that for this system has been received.
I32 csIsisCircIfIndex	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.3	Integer32	read-only	The value of ifIndex for the interface to which this circuit corresponds. This object cannot be modified after creation
I32 csIsisCircIfSubIndex	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.4	Integer32	read-only	A specifier for the part of the interface ifIndex to which this circuit corresponds, such as a DLCI or VPI/VCI. This object cannot be modified after creation
C32 csIsisCircInCtrlPDUs	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.18	Counter32	read-only	The number of IS-IS control PDUs received on this circuit.
I32 csIsisCircIndex	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.2	Integer32	not-accessible	The identifier of this circuit, unique within the instance of the protocol. This object follows the index behaviour. This is for SNMP Indexing purposes only and has no relation to any protocol value.
C32 csIsisCircInitFails	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.15	Counter32	read-only	The number of times initialization of this circuit has failed.
IP csIsisCircIpAddress	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.61	IpAddress	read-create	The IP Address of the VI that IS-IS is enabled on.
T/F csIsisCircIPEncaps	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.59	TruthValue	read-create	Should we encapsulate IS-IS in IP packets?
INT csIsisCircL1AuthType	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.52	INTEGER	read-create	What authentication scheme, if any, is used to protect Level 1 and Point-to-Point hello packets?
CIR csIsisCircL1CircID	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.26	CircuitID	read-only	The LAN ID allocated by the LAN Level 1 Designated Intermediate System. Where this system is not aware of the value (because it is not participating in the Level 1 Designated Intermediate System election), this object has the value which would be proposed for this circuit (i.e. the concatenation of the local system ID and the one octet local Circuit ID for this circuit.
I32 csIsisCircL1CSNPInterval	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.44	Integer32	read-create	Interval of time, in seconds, between transmission of Level 1 CSNPs on multiaccess networks if this router is the designated router.
DEF csIsisCircL1DefaultMetric	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.9	DefaultMetric	read-create	The default metric value of this circuit for Level 1 traffic.
OTH csIsisCircL1DelayMetric	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.10	OtherMetric	read-create	The delay metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported.
SYS csIsisCircL1DesIS	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.27	SystemID	read-only	The ID of the LAN Level 1 Designated Intermediate System on this circuit. If, for any reason this system is not partaking in the relevant Designated Intermediate System election process, then the value returned is the zero length OCTET STRING.
OTH csIsisCircL1ErrorMetric	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.12	OtherMetric	read-create	The error metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported.
OTH csIsisCircL1ExpenseMetric	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.11	OtherMetric	read-create	The expense metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported.
I32 csIsisCircL1HelloMultiplier	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.37	Integer32	read-create	This value is multiplied by the corresponding HelloTimer and the result in seconds (rounded up) is used as the holding time in transmitted hellos, to be used by receivers of hello packets from this IS
I32 csIsisCircL1HelloTimer	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.35	Integer32	read-create	Maximum period, in milliseconds, between Level 1 IIH PDUs on multiaccess networks. It is also used as the period between Hellos on point to point circuits. This object follows the resettingTimer behaviour.
ISP csIsisCircL1ISPriority	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.25	ISPriority	read-create	The priority for becoming LAN Level 1 Deignated Intermediate System on a broadcast circuit.
I32 csIsisCircL1MinLSPTransInt	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.42	Integer32	read-create	Minimum interval, in seconds, between re-transmission of an Level 1 LSP. This object follows the resettingTimer behaviour.
I32 csIsisCircL1PartSNPInterval	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.46	Integer32	read-create	Minimum interval between sending Level 1 Partial Sequence Number PDUs. This object follows the resettingTimer behaviour.
OCT csIsisCircL1Password	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.53	OCTET STRING	read-create	The value to be used as the Authentication Key in Level 1 and Point-to-Point hello packets whenever the corresponding instance of csIsisCircL1AuthType has a value of plaintext. A modification of the corresponding instance of csIsisCircL1AuthType does not modify the csIsisCircL1Password value. Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object.
INT csIsisCircL2AuthType	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.54	INTEGER	read-create	What authentication scheme, if any, is used to protect Level 2 hello packets?
CIR csIsisCircL2CircID	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.30	CircuitID	read-only	The LAN ID allocated by the LAN Level 2 Designated Intermediate System. Where this system is not aware of this value (because it is not participating in the Level 2 Designated Intermediate System election), this object has the value which would be proposed for this circuit (i.e. the concatenation of the local system ID and the one octet local Circuit ID for this circuit.
I32 csIsisCircL2CSNPInterval	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.45	Integer32	read-create	Interval of time, in seconds, between transmission of Level 2 CSNPs on multiaccess networks if this router is the designated router.
DEF csIsisCircL2DefaultMetric	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.20	DefaultMetric	read-create	The default metric value of this circuit for level 2 traffic.
OTH csIsisCircL2DelayMetric	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.21	OtherMetric	read-create	The delay metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported.
SYS csIsisCircL2DesIS	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.31	SystemID	read-only	The ID of the LAN Level 2 Designated Intermediate System on this circuit. If, for any reason, this system is not partaking in the relevant Designated Intermediate System election process, then the value returned is the zero length OCTET STRING.
OTH csIsisCircL2ErrorMetric	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.23	OtherMetric	read-create	The error metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported.
OTH csIsisCircL2ExpenseMetric	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.22	OtherMetric	read-create	The expense metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported.
I32 csIsisCircL2HelloMultiplier	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.38	Integer32	read-create	This value is multiplied by the corresponding HelloTimer and the result in seconds (rounded up) is used as the holding time in transmitted hellos, to be used by receivers of hello packets from this IS
I32 csIsisCircL2HelloTimer	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.36	Integer32	read-create	Maximum period, in milliseconds, between Level 1 IIH PDUs on multiaccess networks. This object follows the resettingTimer behaviour.
ISP csIsisCircL2ISPriority	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.29	ISPriority	read-create	The priority for becoming LAN level 2 Designated Intermediate System.
I32 csIsisCircL2MinLSPTransInt	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.43	Integer32	read-create	Minimum interval, in seconds, between re-transmission of an Level 2 LSP. This object follows the resettingTimer behaviour.
I32 csIsisCircL2PartSNPInterval	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.47	Integer32	read-create	Minimum interval between sending Level 2 Partial Sequence Number PDUs. This object follows the resettingTimer behaviour.
OCT csIsisCircL2Password	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.55	OCTET STRING	read-create	The value to be used as the Authentication Key in Level 1 Hello packets whenever the corresponding instance of csIsisCircL1AuthType has a value of plaintext. A modification of the corresponding instance of csIsisCircL1AuthType does not modify the csIsisCircL1Password value. Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object.
C32 csIsisCircLANL1DesISChanges	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.28	Counter32	read-only	The number of times the LAN Level 1 Designated Intermediate System has changed.
C32 csIsisCircLANL2DesISChanges	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.32	Counter32	read-only	The number of times the LAN Level 2 Designated Intermediate System has changed.
INT csIsisCircLevel	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.62	INTEGER	read-create	This is the IS-IS circuit level. Level-1 only => isisCircLevel = 1, Level-2 only => isisCircLevel = 2, Level-1 or 2 => isisCircLevel = 3.
I32 csIsisCircLocalID	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.5	Integer32	read-only	An identification that can be used in protocol packets to identify a circuit. Implementations may devise ways to assure that this value is suitable for the circuit it is used on. LAN packets only have space for 8 bits. Values of csIsisCircLocalID do not need to be unique. They are only required to differ on LANs where the Intermediate System is the Designated Intermediate System.
I32 csIsisCircLSPThrottle	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.48	Integer32	read-create	Minimal interval of time, in milliseconds, between transmissions of LSPs on a point to point interface.
T/F csIsisCircManL2Only	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.24	TruthValue	read-create	When true, indicates that this circuit is to be used only for level 2. This object follows the replaceOnlyWhileDisabled behaviour.
INT csIsisCircMCAddr	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.33	INTEGER	read-create	Specifies which type of multicast address will be used for sending HELLO PDUs on this circuit.
I32 csIsisCircMeshGroup	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.51	Integer32	read-create	Circuits in the same mesh group act as a virtual multiaccess network. LSPs seen on one circuit in a mesh group will not be flooded to another circuit in the same mesh group. If csIsisCircMeshGroupEnabled is false, this value is ignored.
INT csIsisCircMeshGroupEnabled	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.50	INTEGER	read-create	Is this port a member of a mesh group, or blocked? Circuits in the same mesh group act as a virtual multiaccess network. LSPs seen on one circuit in a mesh group will not be flooded to another circuit in the same mesh group.
I32 csIsisCircMinBroadLSPTransInt	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.41	Integer32	read-create	Minimum interval, in milliseconds, between transmission of LSPs on a broadcast circuit. This object follows the resettingTimer behaviour. This timer shall be capable of a resolution not coarser than 10 milliseconds.
OPE csIsisCircOperState	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.6	OperState	read-create	The operational state of the circuit. This object follows the operationalState behaviour.
C32 csIsisCircOutCtrlPDUs	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.17	Counter32	read-only	The number of IS-IS control PDUs sent on this circuit.
T/F csIsisCircPassiveCircuit	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.49	TruthValue	read-create	Should we include this interface in LSPs, even if it is not running the ISIS Protocol?
CIR csIsisCircPtToPtCircID	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.34	CircuitID	read-only	The ID of the circuit allocated during initialization. If no value has been negotiated (either because the adjacency is to an End System, or because initialization has not yet successfully completed), this object has the value which would be proposed for this circuit (i.e. the concatenation of the local system ID and the one octet local Circuit ID for this circuit.
C32 csIsisCircRejAdjs	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.16	Counter32	read-only	The number of times an adjacency has been rejected on this circuit.
OPE csIsisCircSmallHellos	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.56	OperState	read-create	Can we send unpadded hellos on LAN circuits? Off means LAN Hellos must be padded.
I32 csIsisCircSysInstance	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.1	Integer32	not-accessible	The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour.
csIsisCircTable	1.3.6.1.4.1.3085.3.1.4.2.9.2.1		not-accessible	The table of circuits used by each instance of Integrated IS-IS on this system.
I32 csIsisCircTableEnd	1.3.6.1.4.1.3085.3.1.4.2.9.2.2	Integer32	read-only	End of this group. value undefined
INT csIsisCircType	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.8	INTEGER	read-create	The type of the circuit. This object follows the replaceOnlyWhileDisabled behaviour. The type specified must be compatible with the type of the interface defined by the value of csIsisCircIfIndex.
I32 csIsisCircUpTime	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.60	Integer32	read-only	The amount of time in seconds since this circuit entered state 'up'. Note: This can be implemented as start time less the current time.
csIsisExpPolEntry	1.3.6.1.4.1.3085.3.1.4.2.9.1.6.1		not-accessible	Each entry represents a single export policy applied by the ISIS layer on a Virtual Router.
I32 csIsisExpPolId	1.3.6.1.4.1.3085.3.1.4.2.9.1.6.1.1	Integer32	not-accessible	The Export Policy (see the corresponding entry in csExpPolTable) that is applied to this Virtual Router.
ROW csIsisExpPolStatus	1.3.6.1.4.1.3085.3.1.4.2.9.1.6.1.2	RowStatus	read-create	The RowStatus object for this table. This is used to add and delete entries from this table.
csIsisExpPolTable	1.3.6.1.4.1.3085.3.1.4.2.9.1.6		not-accessible	A set of Export Policies (see csExpPolTable) that are applied by ISIS.
I32 csIsisExpPolTableEnd	1.3.6.1.4.1.3085.3.1.4.2.9.1.7	Integer32	read-only	End of this group. value undefined
I32 csIsisIPRACircIndex	1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.2	Integer32	not-accessible	The identifier of the Circuit over which this IP destination is reachable. This object follows the index and manualOrAutomatic behaviours.
DEF csIsisIPRADefMetric	1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.9	DefaultMetric	read-create	The default metric value for reaching the specified destination over this circuit. This object follows the manualOrAutomatic behaviour.
MET csIsisIPRADefMetricType	1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.13	MetricType	read-create	Indicates whether the default metric is internal or external. This object follows the manualOrAutomatic behaviour.
OTH csIsisIPRADelMetric	1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.10	OtherMetric	read-create	The delay metric value for reaching the specified destination over this circuit. The value zero is reserved to mean the metric is not supported. This object follows the manualOrAutomatic behaviour.
MET csIsisIPRADelMetricType	1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.14	MetricType	read-create	Indicates whether the delay metric is internal or external. This object follows the manualOrAutomatic behaviour.
IP csIsisIPRADest	1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.5	IpAddress	read-create	The destination of this IP Reachable Address. This is either a network address, subnetwork address or host address. This object follows the manualOrAutomatic behaviour.
csIsisIPRAEntry	1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1		not-accessible	Each entry defines an IP Reachable Address to a network, subnetwork or host.
OTH csIsisIPRAErrMetric	1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.12	OtherMetric	read-create	The error metric value for reaching the specified destination over this circuit. The value zero is reserved to mean the metric is not supported. This object follows the manualOrAutomatic behaviour.
MET csIsisIPRAErrMetricType	1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.16	MetricType	read-create	Indicates whether the error metric is internal or external. This object follows the manualOrAutomatic behaviour.
ROW csIsisIPRAExistState	1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.7	RowStatus	read-create	The state of this IP Reachable Address. This object follows the ExistenceState and manualOrAutomatic behaviours.
OTH csIsisIPRAExpMetric	1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.11	OtherMetric	read-create	The expense metric value for reaching the specified destination over this circuit. The value zero is reserved to mean the metric is not supported. This object follows the manualOrAutomatic behaviour.
MET csIsisIPRAExpMetricType	1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.15	MetricType	read-create	Indicates whether the expense metric is internal or external. This object follows the manualOrAutomatic behaviour.
I32 csIsisIPRAIndex	1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.3	Integer32	not-accessible	The identifier for this csIsisIPRAEntry. This value must be unique amongst all IP Reachable Addresses on the same parent Circuit. This object follows the index and manualOrAutomatic behaviours.
IP csIsisIPRAMask	1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.6	IpAddress	read-create	The network mask for the IP Address in the csIsisIPRADest object. This object follows the manualOrAutomatic behaviour.
OPE csIsisIPRAOperState	1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.8	OperState	read-create	The operational state of the IP Reachable Address. This object follows the operationalState and manualOrAutomatic behaviours.
ADR csIsisIPRASNPAAddress	1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.17	SNPAAddress	read-create	The SNPA Address to which a PDU may be forwarded in order to reach a destination which matches this IP Reachable Address. This object follows the manualOrAutomatic behaviour.
I32 csIsisIPRASysInstance	1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.1	Integer32	not-accessible	The identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index and manualOrAutomatic behaviours.
csIsisIPRATable	1.3.6.1.4.1.3085.3.1.4.2.9.5.1		not-accessible	The table of IP Reachable Addresses to networks, subnetworks or hosts either manually configured or learned from another protocol.
INT csIsisIPRAType	1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.4	INTEGER	not-accessible	The type of this IP Reachable Address. Those of type manual are created by the network manager. Those of type automatic are created through propagation of routing information from another routing protocol.
csIsisIPReachAddr	1.3.6.1.4.1.3085.3.1.4.2.9.5
csIsisISAdj	1.3.6.1.4.1.3085.3.1.4.2.9.3
I32 csIsisISAdjAreaAddrAdjIndex	1.3.6.1.4.1.3085.3.1.4.2.9.3.2.1.3	Integer32	not-accessible	The identifier of the IS adjacency to which this entry belongs.
I32 csIsisISAdjAreaAddrCircIndex	1.3.6.1.4.1.3085.3.1.4.2.9.3.2.1.2	Integer32	not-accessible	The identifier of the Circuit which is the parent of the IS adjacency to which this Area Address entry corresponds.
csIsisISAdjAreaAddrEntry	1.3.6.1.4.1.3085.3.1.4.2.9.3.2.1		not-accessible	Each entry contains one Area Address reported by a neighboring Intermediate System in its IIH PDUs.
ADR csIsisISAdjAreaAddress	1.3.6.1.4.1.3085.3.1.4.2.9.3.2.1.4	OSINSAddress	read-only	One Area Address as reported in IIH PDUs received from the neighbor.
I32 csIsisISAdjAreaAddrSysInstance	1.3.6.1.4.1.3085.3.1.4.2.9.3.2.1.1	Integer32	not-accessible	The unique identifier of the Integrated IS-IS instance to which this row corresponds.
csIsisISAdjAreaAddrTable	1.3.6.1.4.1.3085.3.1.4.2.9.3.2		not-accessible	This table contains the set of Area Addresses of neighboring Intermediate Systems as reported in received IIH PDUs.
I32 csIsisISAdjCircIndex	1.3.6.1.4.1.3085.3.1.4.2.9.3.1.1.2	Integer32	not-accessible	The Circuit Index of the Circuit which is the parent of the IS adjacency.
csIsisISAdjEntry	1.3.6.1.4.1.3085.3.1.4.2.9.3.1.1		not-accessible	Each entry corresponds to one adjacency to an Intermediate System on this system.
I32 csIsisISAdjHoldTimer	1.3.6.1.4.1.3085.3.1.4.2.9.3.1.1.9	Integer32	read-only	The holding time for this adjacency updated from received IIH PDUs.
I32 csIsisISAdjIndex	1.3.6.1.4.1.3085.3.1.4.2.9.3.1.1.3	Integer32	not-accessible	A unique value identifying the IS adjacency from all other such adjacencies on this circuit. This value is assigned by the system when the adjacency is created automatically.
I32 csIsisISAdjIPAddrAdjIndex	1.3.6.1.4.1.3085.3.1.4.2.9.3.3.1.3	Integer32	not-accessible	The identifier of the IS adjacency to which this entry belongs.
I32 csIsisISAdjIPAddrCircIndex	1.3.6.1.4.1.3085.3.1.4.2.9.3.3.1.2	Integer32	not-accessible	The identifier of the Circuit which is the parent of the IS adjacency to which this IP Address entry corresponds.
csIsisISAdjIPAddrEntry	1.3.6.1.4.1.3085.3.1.4.2.9.3.3.1		not-accessible	Each entry contains one IP Address reported by a neighboring Intermediate System in its IIH PDUs.
IP csIsisISAdjIPAddress	1.3.6.1.4.1.3085.3.1.4.2.9.3.3.1.4	IpAddress	read-only	One IP Address as reported in IIH PDUs received from the neighbor.
I32 csIsisISAdjIPAddrSysInstance	1.3.6.1.4.1.3085.3.1.4.2.9.3.3.1.1	Integer32	not-accessible	The unique identifier of the Integrated IS-IS instance to which this row corresponds.
csIsisISAdjIPAddrTable	1.3.6.1.4.1.3085.3.1.4.2.9.3.3		not-accessible	This table contains the set of IP Addresses of neighboring Intermediate Systems as reported in received IIH PDUs.
ISP csIsisISAdjNeighPriority	1.3.6.1.4.1.3085.3.1.4.2.9.3.1.1.10	ISPriority	read-only	Priority of the neighboring Intermediate System for becoming the LAN Level 1 Designated Intermediate System if the value of csIsisISAdjNeighSysType is L1IntermediateSystem or LAN Level 2 Designated Intermediate System if the value of csIsisISAdjNeighSysType is L2IntermediateSystem.
ADR csIsisISAdjNeighSNPAAddress	1.3.6.1.4.1.3085.3.1.4.2.9.3.1.1.5	SNPAAddress	read-only	The SNPA address of the neighboring system.
OCT csIsisISAdjNeighSysID	1.3.6.1.4.1.3085.3.1.4.2.9.3.1.1.7	OCTET STRING	read-only	The system ID and circuit ID of the neighboring Intermediate System set from the source ID field of the neighbor's IIH PDUs.
INT csIsisISAdjNeighSysType	1.3.6.1.4.1.3085.3.1.4.2.9.3.1.1.6	INTEGER	read-only	The type of the neighboring system.
I32 csIsisISAdjProtSuppAdjIndex	1.3.6.1.4.1.3085.3.1.4.2.9.3.4.1.3	Integer32	not-accessible	The identifier the IS adjacency to which this entry corresponds.
I32 csIsisISAdjProtSuppCircIndex	1.3.6.1.4.1.3085.3.1.4.2.9.3.4.1.2	Integer32	not-accessible	The identifier of the Circuit which is the parent of the IS adjacency to which this supported protocol entry corresponds.
csIsisISAdjProtSuppEntry	1.3.6.1.4.1.3085.3.1.4.2.9.3.4.1		not-accessible	Each entry contains one protocol supported by a neighboring Intermediate System as reported in its IIH PDUs.
SUP csIsisISAdjProtSuppProtocol	1.3.6.1.4.1.3085.3.1.4.2.9.3.4.1.4	SupportedProtocol	read-only	One supported protocol as reported in IIH PDUs received from the neighbor.
I32 csIsisISAdjProtSuppSysInstance	1.3.6.1.4.1.3085.3.1.4.2.9.3.4.1.1	Integer32	not-accessible	The unique identifier of the Integrated IS-IS instance to which this row corresponds.
csIsisISAdjProtSuppTable	1.3.6.1.4.1.3085.3.1.4.2.9.3.4		not-accessible	This table contains the set of protocols supported by neighboring Intermediate Systems as reported in received IIH PDUs.
I32 csIsisISAdjProtSuppTableEnd	1.3.6.1.4.1.3085.3.1.4.2.9.3.5	Integer32	read-only	End of this group. value undefined
INT csIsisISAdjState	1.3.6.1.4.1.3085.3.1.4.2.9.3.1.1.4	INTEGER	read-only	The state of the adjacency
I32 csIsisISAdjSysInstance	1.3.6.1.4.1.3085.3.1.4.2.9.3.1.1.1	Integer32	not-accessible	The unique identifier of the Integrated IS-IS instance to which this row corresponds.
csIsisISAdjTable	1.3.6.1.4.1.3085.3.1.4.2.9.3.1		not-accessible	The table of adjacencies to Intermediate Systems.
I32 csIsisISAdjUpTime	1.3.6.1.4.1.3085.3.1.4.2.9.3.1.1.11	Integer32	read-only	The amount of time in seconds since this adjacency entered state 'up'. Note: This can be implemented as start time less the current time.
INT csIsisISAdjUsage	1.3.6.1.4.1.3085.3.1.4.2.9.3.1.1.8	INTEGER	read-only	An adjacency of type level1 is used for level 1 traffic only. An adjacency of type level2 is used for level 2 traffic only. An adjacency of type level1and2 is used for both level 1 and level 2 traffic. There may be two adjacencies (of types level1 and level2) between the same pair of Intermediate Systems.
DEF csIsisL2SummAddrDefaultMetric	1.3.6.1.4.1.3085.3.1.4.2.9.1.5.1.6	DefaultMetric	read-create	The default metric value to announce this summary address with in Level 2 LSPs generated by this system.
OTH csIsisL2SummAddrDelayMetric	1.3.6.1.4.1.3085.3.1.4.2.9.1.5.1.7	OtherMetric	read-create	The delay metric value to announce this summary address with in Level 2 LSPs generated by this system. The value of zero is reserved to indicate that this metric is not supported.
csIsisL2SummAddrEntry	1.3.6.1.4.1.3085.3.1.4.2.9.1.5.1		not-accessible	Each entry contains one IP summary address.
OTH csIsisL2SummAddrErrorMetric	1.3.6.1.4.1.3085.3.1.4.2.9.1.5.1.9	OtherMetric	read-create	The error metric value to announce this summary address with in Level 2 LSPs generated by this system. The value of zero is reserved to indicate that this metric is not supported.
IP csIsisL2SummAddress	1.3.6.1.4.1.3085.3.1.4.2.9.1.5.1.2	IpAddress	not-accessible	The IP Address value for this summary address. This object follows the index behaviour.
ROW csIsisL2SummAddrExistState	1.3.6.1.4.1.3085.3.1.4.2.9.1.5.1.4	RowStatus	read-create	The existence state of this summary address. This object follows the row status behaviour.
OTH csIsisL2SummAddrExpenseMetric	1.3.6.1.4.1.3085.3.1.4.2.9.1.5.1.8	OtherMetric	read-create	The expense metric value to announce this summary address with in Level 2 LSPs generated by this system. The value of zero is reserved to indicate that this metric is not supported.
IP csIsisL2SummAddrMask	1.3.6.1.4.1.3085.3.1.4.2.9.1.5.1.3	IpAddress	not-accessible	The mask value for this summary address. This object follows the index behaviour.
OPE csIsisL2SummAddrOperState	1.3.6.1.4.1.3085.3.1.4.2.9.1.5.1.5	OperState	read-create	The operational state of this entry. This object follows the operationalState behaviour. When the operational state changes if this would cause the contents of Level 2 LSPs originated by the system to change then those new LSPs must be generated and sent as soon as is permitted by the ISIS protocol.
I32 csIsisL2SummAddrSysInstance	1.3.6.1.4.1.3085.3.1.4.2.9.1.5.1.1	Integer32	not-accessible	The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviours.
csIsisL2SummAddrTable	1.3.6.1.4.1.3085.3.1.4.2.9.1.5		not-accessible	The set of IP summary addresses to use in forming the contents of Level 2 LSPs originated by this level 2 Intermediate System.
ADR csIsisManAdjNeighNSAP	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.57	OSINSAddress	read-create	The address of the neighbour if this is a manual adjacency. This object follows the replaceOnlyWhileDisabled behaviour.
ADR csIsisManAdjNeighSNPA	1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.58	SNPAAddress	read-create	The SNPA of the neighbour if this is a manual adjacency. This object follows the replaceOnlyWhileDisabled behaviour.
ADR csIsisManAreaAddr	1.3.6.1.4.1.3085.3.1.4.2.9.1.2.1.2	OSINSAddress	not-accessible	A manually configured area address for this system. This object follows the index behaviour. Note: an index for the entry {1, {49.0001} active} in this table would be the ordered pair (1, (0x03 0x49 0x00 0x01)), as the length of an Octet string is part of the OID.
csIsisManAreaAddrEntry	1.3.6.1.4.1.3085.3.1.4.2.9.1.2.1		not-accessible	Each entry contains one area address manually configured on this system
ROW csIsisManAreaAddrExistState	1.3.6.1.4.1.3085.3.1.4.2.9.1.2.1.3	RowStatus	read-create	The state of the csIsisManAreaAddrEntry. This object follows the Row Status behaviour. If an attempt is made to set this object to the value off when the corresponding csIsisManAreaAddrEntry is the only valid entry for this instance and when the corresponding ISIS instance has csIsisSysOperState set to On then the attempt is rejected.
I32 csIsisManAreaAddrSysInstance	1.3.6.1.4.1.3085.3.1.4.2.9.1.2.1.1	Integer32	not-accessible	The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour.
csIsisManAreaAddrTable	1.3.6.1.4.1.3085.3.1.4.2.9.1.2		not-accessible	The set of manual area addresses configured on this Intermediate System.
csIsisReachAdddr	1.3.6.1.4.1.3085.3.1.4.2.9.4
INT csIsisSysAdminStatus	1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.38	INTEGER	read-create	This object is used to enable/disable IS-IS routing on this Virtual Router.
C32 csIsisSysAttmptToExMaxSeqNums	1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.19	Counter32	read-only	Number of times the IS has attempted to exceed the maximum sequence number.
OCT csIsisSysAuthAreaTransPwd	1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.28	OCTET STRING	read-create	The value to be used as the Authentication Key in Level 1 Link State Packets whenever the value of csIsisSysAuthAreaType has a value of plaintext. A modification of csIsisSysAuthAreaType does not modify the csIsisSysAuthAreaTransPwd value. Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object.
INT csIsisSysAuthAreaType	1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.27	INTEGER	read-create	What authentication scheme, if any, is used to protect Level 1 Link State packets?
OCT csIsisSysAuthDomainTransPwd	1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.30	OCTET STRING	read-create	The value to be used as the Authentication Key in Level 2 Link State Packets whenever the value of csIsisSysAuthDomainType has a value of plaintext. A modification of csIsisSysAuthDomainType does not modify the csIsisSysAuthDomainTransPwd value. Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object.
INT csIsisSysAuthDomainType	1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.29	INTEGER	read-create	What authentication scheme, if any, is used to protect Level 2 Link State packets?
C32 csIsisSysAuthFails	1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.31	Counter32	read-only	The number of authentication failures recognized by this instance of the protocol.
C32 csIsisSysCorrLSPs	1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.16	Counter32	read-only	Number of corrupted LSPs detected.
T/F csIsisSysDefInfoOrig	1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.42	TruthValue	read-create	When on, distributes the default route into the IS-IS routing domain.
csIsisSysEntry	1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1		not-accessible	Each row defines information specific to a single instance of the protocol existing on the system.
ROW csIsisSysExistState	1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.37	RowStatus	read-create	The state of the ISIS router. Turning this off forces the router to forget all current state
SYS csIsisSysID	1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.4	SystemID	read-create	The ID for this instance of the Integrated IS-IS protocol. This value is appended to each of the instance's area addresses to form the Network Entity Titles valid for this instance. The derivation of a value for this object is implementation-specific. Some implementations may assign values and not permit write MAX-ACCESS, others may require the value to be set manually.
C32 csIsisSysIDFieldLenMismatches	1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.22	Counter32	read-only	Number of times a PDU is received with a different value for ID field length to that of the receiving system.
I32 csIsisSysInstance	1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.1	Integer32	not-accessible	The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour.
LEV csIsisSysL1State	1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.15	LevelState	read-only	The state of the Level 1 database.
LEV csIsisSysL2State	1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.25	LevelState	read-only	The state of the Level 2 database.
T/F csIsisSysL2TO1Leak	1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.43	TruthValue	read-create	When on, enables Level-2 to Level-1 route leaking.
T/F csIsisSysLogAdjacencyChanges	1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.33	TruthValue	read-create	If true, causes IS-IS to generate a log message when an IS-IS adjacency changes state (up or down).
U32 csIsisSysLogAreaFlag	1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.44	Unsigned32	read-create	Each bit within this object enables loggin for a specific area within ISIS. Below is a list of the different areas available for logging within BGP and their corresponding bits identifiers. area bit ------------------------------------------------------ system 0 adj 1 lsp 2 snp 3 spf 4 packet recv 5 packet send 6 end of description.
U32 csIsisSysLogLevelFlag	1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.45	Unsigned32	read-create	Each bit within this object enables logging at a specific level for ISIS. Below is a list of the different log levels available and their corresponding bits identifiers. area bit ------------------------------------------------------ critical 0 error 1 warning 2 information 3 detail 4 debug 5 end of description.
T/F csIsisSysLSPIgnoreErrors	1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.32	TruthValue	read-create	If true, allow the router to ignore IS-IS link state packets (LSPs) that are received with internal checksum errors rather than purging the LSPs.
C32 csIsisSysLSPL1DbaseOloads	1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.17	Counter32	read-only	Number of times the LSP L1 database has become overloaded.
C32 csIsisSysLSPL2DbaseOloads	1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.26	Counter32	read-only	Number of times the Level 2 LSP database has become overloaded.
C32 csIsisSysManAddrDropFromAreas	1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.18	Counter32	read-only	Number of times a manual address has been dropped from the area.
I32 csIsisSysMaxAreaAddresses	1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.9	Integer32	read-create	The maximum number of area addresses to be permitted for the area in which this instance exists. Note that all Intermediate Systems in the same area must have the same value configured for this attribute if correct operation is to be assumed. This object follows the replaceOnlyWhileDisabled behaviour.
C32 csIsisSysMaxAreaAddrMismatches	1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.23	Counter32	read-only	Number of times a PDU is received with a different value for MaximumAreaAddresses from that of the receiving system.
T/F csIsisSysMaxAreaCheck	1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.35	TruthValue	read-create	When on, enables checking of maximum area addresses per IS version of ISO10589.
I32 csIsisSysMaxLSPGenInt	1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.6	Integer32	read-create	Maximum interval, in seconds, between generated LSPs by this instance. This object follows the resettingTimer behaviour.This value should be always lesser than csIsisSysMaxLSPLifetime and greater than csIsisSysMinL1LSPGenInt
I32 csIsisSysMaxLSPLifetime	1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.7	Integer32	read-create	Maximum interval, in seconds, after which LSPs shall be aged out by this instance. This object follows the resettingTimer behaviour. This value should always be greater than csIsisSysMaxLSPGenInt
I32 csIsisSysMaxPathSplits	1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.5	Integer32	read-create	Maximum number of paths with equal routing metric value which it is permitted to split between. This object follows the replaceOnlyWhileDisabled behaviour.
I32 csIsisSysMinL1LSPGenInt	1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.10	Integer32	read-create	Minimum interval, in seconds, between successive generation of L1 LSPs with the same LSPID by this instance. This object follows the resettingTimer behaviour.
I32 csIsisSysMinL2LSPGenInt	1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.11	Integer32	read-create	Minimum interval, in seconds, between successive generation of L2 LSPs with the same LSPID by this instance. This object follows the resettingTimer behaviour.
TES csIsisSysNextCircIndex	1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.36	TestAndIncr	read-create	This object is used to assign values to csIsisCircIndex as described in 'Textual Conventions for SNMPv2'. The network manager reads this object, and then writes the value back in a SET that creates a new instance of csIsisCircEntry. If the SET fails with the code 'inconsistentValue', then the process must be repeated; If the SET succeeds, then the ob- ject is incremented, and the new instance is created according to the manager's directions.
OPE csIsisSysOperState	1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.14	OperState	read-create	The operational state of this instance of the Integrated IS-IS protocol. Setting this object to the value on when its current value is off enables operation of this instance of the Integrated IS-IS protocol.
LSP csIsisSysOrigL1LSPBuffSize	1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.8	LSPBuffSize	read-create	The maximum size of Level 1 LSPs and SNPs originated by this instance. This object follows the replaceOnlyWhileDisabled behaviour.
LSP csIsisSysOrigL2LSPBuffSize	1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.24	LSPBuffSize	read-create	The maximum size of Level 2 LSPs and SNPs originated by this system. This object follows the replaceOnlyWhileDisabled behaviour.
C32 csIsisSysOwnLSPPurges	1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.21	Counter32	read-only	Number of times a zero-aged copy of the system's own LSP is received from some other node.
C32 csIsisSysPartChanges	1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.34	Counter32	read-only	partition changes
I32 csIsisSysPollESHelloRate	1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.12	Integer32	read-create	The value, in seconds, to be used for the suggested ES configuration timer in ISH PDUs when soliciting the ES configuration.
csIsisSysProtSuppEntry	1.3.6.1.4.1.3085.3.1.4.2.9.1.4.1		not-accessible	Each entry contains one protocol supported by an instance of the Integrated ISIS protocol.
ROW csIsisSysProtSuppExistState	1.3.6.1.4.1.3085.3.1.4.2.9.1.4.1.3	RowStatus	read-create	The state of the csIsisSysProtSuppEntry. This object follows the RowStatus behavior.
SUP csIsisSysProtSuppProtocol	1.3.6.1.4.1.3085.3.1.4.2.9.1.4.1.2	SupportedProtocol	not-accessible	One supported protocol. This object follows the index behaviour.
I32 csIsisSysProtSuppSysInstance	1.3.6.1.4.1.3085.3.1.4.2.9.1.4.1.1	Integer32	not-accessible	The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour.
csIsisSysProtSuppTable	1.3.6.1.4.1.3085.3.1.4.2.9.1.4		not-accessible	This table contains the manually configured set of protocols supported by each instance of the Integrated ISIS protocol.
C32 csIsisSysSeqNumSkips	1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.20	Counter32	read-only	Number of times a sequence number skip has occurred.
I32 csIsisSysSPFL1Int	1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.39	Integer32	read-create	This object is used for SPF Level 1 Interval, it is in seconds.
I32 csIsisSysSPFL2Int	1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.40	Integer32	read-create	This object is used for SPF Level 2 Interval, it is in seconds.
I32 csIsisSysSPFStartInt	1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.41	Integer32	read-create	The number in seconds system will wait to start SPF Interval calculation.
csIsisSysTable	1.3.6.1.4.1.3085.3.1.4.2.9.1.1		not-accessible	The set of instances of the Integrated IS-IS protocol existing on the system.
csIsisSystem	1.3.6.1.4.1.3085.3.1.4.2.9.1
INT csIsisSysType	1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.3	INTEGER	read-create	The type of this instance of the Integrated IS-IS protocol. This object follows the replaceOnlyWhileDisabled behaviour.
STR csIsisSysVersion	1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.2	DisplayString	read-only	The version number of the IS-IS protocol to which this instance conforms. This value must be set by the implementation when the row is valid.
I32 csIsisSysWaitTime	1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.13	Integer32	read-create	Number of seconds to delay in waiting state before entering on state. This object follows the resettingTimer behaviour.
INT csLdpEntityAdminStatus	1.3.6.1.4.1.3085.3.1.4.2.10.3.3.1.3	INTEGER	read-create	The administrative status of this LDP Entity. If this object is changed from 'enable' to 'disable' and this entity has already attempted to establish contact with a Peer (which implies that the 'csLdpEntityRowStatus' object has been set to 'active'), then all contact with that Peer is lost and all information from that Peer needs to be removed from the MIB. At this point the user is able to change values which are related to this entity. When the admin status is set back to 'up', then this Entity will attempt to establish new sessions with the Peer.
csLdpEntityEntry	1.3.6.1.4.1.3085.3.1.4.2.10.3.3.1		not-accessible	An entry in this table represents an LDP entity. An entry can be created by a network administrator or by an SNMP agent as instructed by LDP.
I32 csLdpEntityHelloHoldTimer	1.3.6.1.4.1.3085.3.1.4.2.10.3.3.1.5	Integer32	read-create	The two octet value which is the proposed Hello hold timer for this LDP Entity. A value of 0 means use the default, which is 15 seconds for Link Hellos and 45 seconds for Targeted Hellos. A value of 65535 means infinite.
I32 csLdpEntityHelloTimer	1.3.6.1.4.1.3085.3.1.4.2.10.3.3.1.4	Integer32	read-create	Configures the interval in seconds between LDP hello's on this interface.
U32 csLdpEntityIndex	1.3.6.1.4.1.3085.3.1.4.2.10.3.3.1.1	Unsigned32	not-accessible	This index is used as a secondary index to uniquely identify this row. Before creating a row in this table, the 'csLdpEntityIndexNext' object should be retrieved. That value should be used for the value of this index when creating a row in this table. (NOTE: if a value of zero (0) is retrieved, that indicates that no rows can be created in this table at this time. A secondary index (this object) is needed by some but not all, LDP implementations. For example in an LDP implementation which uses PPP, this index may be needed.
I32 csLdpEntityKeepAliveHoldTimer	1.3.6.1.4.1.3085.3.1.4.2.10.3.3.1.7	Integer32	read-create	The two octet value which is the proposed keep alive hold timer for this LDP Entity.
I32 csLdpEntityKeepAliveTimer	1.3.6.1.4.1.3085.3.1.4.2.10.3.3.1.6	Integer32	read-create	Configures the interval in seconds between keepalive messages on this interface.
ROW csLdpEntityRowStatus	1.3.6.1.4.1.3085.3.1.4.2.10.3.3.1.2	RowStatus	read-create	An object that allows entries in this table to be created and deleted using the RowStatus convention. Once the 'csLdpEntityAdminStatus' object has the value of 'up' and this object has the value of 'active' then the Entity will atttempt to contact an LDP Peer. If the value of this object is changed to 'notInService', then the Entity looses contact with the LDP Peer and all information related to that Peer must be removed from the MIB. This has the same effect as changing 'csLdpEntityAdminStatus' from 'enable' to 'disable'. When this object is set to 'active' and the value of the 'csLdpEntityAdminStatus' is 'enable' then this Entity will attempt to contact the Peer and establish new sessions.
csLdpEntityTable	1.3.6.1.4.1.3085.3.1.4.2.10.3.3		not-accessible	This table contains information about the MPLS Label Distribution Protocol Entities which exist on this Label Switch Router (LSR).
IP csLdpEntityTransportAddr	1.3.6.1.4.1.3085.3.1.4.2.10.3.3.1.8	IpAddress	read-create	This is used to store transport ip address for LDP Entity
T/F csLdpTargetActive	1.3.6.1.4.1.3085.3.1.4.2.10.3.4.1.8	TruthValue	read-create	If TRUE indicates that this is an active targeted entity i.e a targeted neighbor is explictly configured through CLI. The value set to true while creating an targeted entity
INT csLdpTargetAdminStatus	1.3.6.1.4.1.3085.3.1.4.2.10.3.4.1.3	INTEGER	read-create	The administrative status of this LDP Targeted Session. If this object is changed from 'enable' to 'disable' and this Session has already attempted to establish contact with a Peer (which implies that the 'csLdpTargetRowStatus' object has been set to 'active'), then all contact with that Peer is lost and all information from that Peer needs to be removed from the MIB. At this point the user is able to change values which are related to this entity. When the admin status is set back to 'up', then this Session will attempt to establish new sessions with the Peer.
csLdpTargetEntry	1.3.6.1.4.1.3085.3.1.4.2.10.3.4.1		not-accessible	An entry in this table represents an LDP Targeted Session. An entry can be created by a network administrator or by an SNMP agent as instructed by LDP.
I32 csLdpTargetHelloHoldTimer	1.3.6.1.4.1.3085.3.1.4.2.10.3.4.1.5	Integer32	read-create	The two octet value which is the proposed Hello hold timer for this LDP Targeted Session. A value of 0 means use the default, which is 15 seconds for Link Hellos and 45 seconds for Targeted Hellos. A value of 65535 means infinite.
I32 csLdpTargetHelloTimer	1.3.6.1.4.1.3085.3.1.4.2.10.3.4.1.4	Integer32	read-create	Configures the interval in seconds between LDP Targeted hello's on VR
I32 csLdpTargetKeepAliveHoldTimer	1.3.6.1.4.1.3085.3.1.4.2.10.3.4.1.7	Integer32	read-create	The two octet value which is the proposed keep alive hold timer for this LDP Targeted Session.
I32 csLdpTargetKeepAliveTimer	1.3.6.1.4.1.3085.3.1.4.2.10.3.4.1.6	Integer32	read-create	Configures the interval in seconds between keepalive messages
IP csLdpTargetPeerIpAddr	1.3.6.1.4.1.3085.3.1.4.2.10.3.4.1.1	IpAddress	not-accessible	This index is used as a secondary index to uniquely identify this row. Before creating a row in this table, the 'csLdpTargetIndexNext' object should be retrieved. That value should be used for the value of this index when creating a row in this table. (NOTE: if a value of zero (0) is retrieved, that indicates that no rows can be created in this table at this time. A secondary index (this object) is needed by some but not all, LDP implementations. For example in an LDP implementation which uses PPP, this index may be needed.
ROW csLdpTargetRowStatus	1.3.6.1.4.1.3085.3.1.4.2.10.3.4.1.2	RowStatus	read-create	An object that allows entries in this table to be created and deleted using the RowStatus convention. Once the 'csLdpTargetAdminStatus' object has the value of 'up' and this object has the value of 'active' then the Session will atttempt to contact an LDP Peer. If the value of this object is changed to 'notInService', then the Session looses contact with the LDP Peer and all information related to that Peer must be removed from the MIB. This has the same effect as changing 'csLdpTargetAdminStatus' from 'enable' to 'disable'. When this object is set to 'active' and the value of the 'csLdpTargetAdminStatus' is 'enable' then this Session will attempt to contact the Peer and establish new sessions.
csLdpTargetTable	1.3.6.1.4.1.3085.3.1.4.2.10.3.4		not-accessible	This table contains information about the MPLS Label Distribution Protocol Targeted Sessions which exist on this Label Switch Router (LSR).
INT csLdpVrAcceptTargetedHellos	1.3.6.1.4.1.3085.3.1.4.2.10.3.1.1.10	INTEGER	read-create	Indicates the targeted hellos are accepeted or rejected
INT csLdpVrAdminStatus	1.3.6.1.4.1.3085.3.1.4.2.10.3.1.1.2	INTEGER	read-create	Indicates the administrator's intent as to whether LDP should be enabled or disabled on this router.
INT csLdpVrAutorouteAnnounce	1.3.6.1.4.1.3085.3.1.4.2.10.3.1.1.7	INTEGER	read-create	Indicates the administrator's intent to let BGP use LDP LSP's present in MPLS RIB for the bgp-next-hop resolution
csLdpVrConfEntry	1.3.6.1.4.1.3085.3.1.4.2.10.3.1.1		not-accessible	This entry is indexed by the VPN and VR ID
ROW csLdpVrConfRowStatus	1.3.6.1.4.1.3085.3.1.4.2.10.3.1.1.1	RowStatus	read-create	The existence state of this table. This object follows the Row Status behaviour
csLdpVrConfTable	1.3.6.1.4.1.3085.3.1.4.2.10.3.1		not-accessible	This table is used to provide LDP related functionality at the router level
I32 csLdpVrConfTableEnd	1.3.6.1.4.1.3085.3.1.4.2.10.3.2	Integer32	read-only	End of this group. value undefined
U32 csLdpVrEventLogArea	1.3.6.1.4.1.3085.3.1.4.2.10.3.1.1.4	Unsigned32	read-create	Each bit within this object enables loggin for a specific area within LDP. Below is a list of the different areas available for logging within LDP and their corresponding bits identifiers. area bit ----------------------------------------------------- all 1 adjacency 2 packet-receive 3 packet-send 4 session 5 packet-verbose 6 lsp 7 end of description.
U32 csLdpVrEventLogAreaMask	1.3.6.1.4.1.3085.3.1.4.2.10.3.1.1.5	Unsigned32	read-create	csLdpVrEventLogAreaMask is used to indicate which area bit is being set to on/off. Below is a list of the different areas available for logging within LDP and their corresponding bits identifiers. area bit ----------------------------------------------------- all 1 adjacency 2 packet-receive 3 packet-send 4 session 5 packet-verbose 6 lsp 7 end of description.
INT csLdpVrEventLogLevel	1.3.6.1.4.1.3085.3.1.4.2.10.3.1.1.3	INTEGER	read-create	This specifies the level of detail for the event log.
INT csLdpVrPwe3AutorouteAnnounce	1.3.6.1.4.1.3085.3.1.4.2.10.3.1.1.9	INTEGER	read-create	Indicates the administrator's intent to let PWE3 use LDP LSP's present in MPLS RIB for the next-hop resolution
I32 csLdpVrRoutePreference	1.3.6.1.4.1.3085.3.1.4.2.10.3.1.1.6	Integer32	read-create	Route preference Value for LDP routes
INT csLdpVrVpnAutorouteAnnounce	1.3.6.1.4.1.3085.3.1.4.2.10.3.1.1.8	INTEGER	read-create	Indicates the administrator's intent to let Vpn use LDP LSP's present in MPLS RIB for the vpn-next-hop resolution
csMplsExtensionsEntry	1.3.6.1.4.1.3085.3.1.4.2.10.2.4.1		not-accessible	This entry is indexed by the VPN and VrID
ROW csMplsExtensionsRowStatus	1.3.6.1.4.1.3085.3.1.4.2.10.2.4.1.2	RowStatus	read-create	The existence state of this table. This object follows the Row Status behaviour.
csMplsExtensionsTable	1.3.6.1.4.1.3085.3.1.4.2.10.2.4		not-accessible	This table is used to support Mpls Extensions
INT csMplsInterfaceAdminStatus	1.3.6.1.4.1.3085.3.1.4.2.10.2.2.1.7	INTEGER	read-create	Indicates the administrator's intent as to whether MPLS should be enabled or disabled on this interface.
I32 csMplsInterfaceAdminWeight	1.3.6.1.4.1.3085.3.1.4.2.10.2.2.1.9	Integer32	read-create	Used to override the Interior Gateway Protocol (IGP) administrative weight (cost) of the link
I32 csMplsInterfaceAttribFlags	1.3.6.1.4.1.3085.3.1.4.2.10.2.2.1.10	Integer32	read-create	Used to set the user-specified attribute flags for the interface
csMplsInterfaceConfEntry	1.3.6.1.4.1.3085.3.1.4.2.10.2.2.1		not-accessible	An entry in this table is created for interface specific Label space configuration information.
csMplsInterfaceConfTable	1.3.6.1.4.1.3085.3.1.4.2.10.2.2		not-accessible	This table has one entry for every interface running Mpls
MPL csMplsInterfaceLabelMaxIn	1.3.6.1.4.1.3085.3.1.4.2.10.2.2.1.4	MplsLabel	read-create	This object specifies the upper limit of the label range to be used in incoming packets over this interface. This object specifies configuration information for interface specific label space and is significant only if value of csMplsInterfaceUseInterfaceLabels is set to TRUE.
MPL csMplsInterfaceLabelMaxOut	1.3.6.1.4.1.3085.3.1.4.2.10.2.2.1.6	MplsLabel	read-create	This object specifies the upper limit of the label range to be used in outgoing packets over this interface. This object specifies configuration information for interface specific label space and is significant only if value of csMplsInterfaceUseInterfaceLabels is set to TRUE.
MPL csMplsInterfaceLabelMinIn	1.3.6.1.4.1.3085.3.1.4.2.10.2.2.1.3	MplsLabel	read-create	This object specifies the lower limit of the label range to be used in incoming packets over this interface. This object specifies configuration information for interface specific label space and is significant only if value of csMplsInterfaceUseInterfaceLabels is set to TRUE.
MPL csMplsInterfaceLabelMinOut	1.3.6.1.4.1.3085.3.1.4.2.10.2.2.1.5	MplsLabel	read-create	This object specifies the lower limit of the label range to be used in outgoing packets over this interface. This object specifies configuration information for interface specific label space and is significant only if value of csMplsInterfaceUseInterfaceLabels is set to TRUE.
INT csMplsInterfaceLabelRange	1.3.6.1.4.1.3085.3.1.4.2.10.2.2.1.2	INTEGER	read-create	This object specifies the type of Labels that are being use for interface specific label space configuration information. Value of this object is significant only if csMplsInterfaceUseInterfaceLabels is set to TRUE. (If csMplsInterfaceUseInterfaceLabels is FALSE then this interface is configured to use Platform specific label space.)
INT csMplsInterfaceOperStatus	1.3.6.1.4.1.3085.3.1.4.2.10.2.2.1.8	INTEGER	read-only	This object specifies the operational state of MPLS on this interface.
ROW csMplsInterfaceRowStatus	1.3.6.1.4.1.3085.3.1.4.2.10.2.2.1.11	RowStatus	read-create	A row status type for the MplsInterface table
T/F csMplsInterfaceUseInterfaceLabels	1.3.6.1.4.1.3085.3.1.4.2.10.2.2.1.1	TruthValue	read-create	If TRUE indicates that this interface is configured to use interface specific label space. If FALSE then this interface is configured to use Platform specific label space.
csMplsIsisExtensionsEntry	1.3.6.1.4.1.3085.3.1.4.2.10.2.6.1		not-accessible	This entry is indexed by the VPN and VrID
ROW csMplsIsisExtensionsRowStatus	1.3.6.1.4.1.3085.3.1.4.2.10.2.6.1.3	RowStatus	read-create	The existence state of this table. This object follows the Row Status behaviour.
csMplsIsisExtensionsTable	1.3.6.1.4.1.3085.3.1.4.2.10.2.6		not-accessible	This table is used to support ISIS extensions to MPLS
TIM csMplsLspAge	1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.6	TimeStamp	read-create	The age (i.e., time from creation till now) of this LSP in 10-millisecond periods.
I32 csMplsLspConfiguredPaths	1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.13	Integer32	read-create	The number of paths configured for this LSP.
csMplsLspEntry	1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1		not-accessible	Entry containing information about a particular Label Switched Path.
IP csMplsLspFrom	1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.16	IpAddress	read-create	Source IP address of this LSP.
I32 csMplsLspID	1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.1	Integer32	not-accessible	This object identifies a Label Switched Path.
TIM csMplsLspLastPathChange	1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.12	TimeStamp	read-create	The time in 10-millisecond units since the last change occurred on this LSP.
TIM csMplsLspLastTransition	1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.10	TimeStamp	read-create	The time in 10-millisecond units since the last transition occurred on this LSP.
STR csMplsLspName	1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.2	DisplayString	not-accessible	Name of the Label Switched Path.
C32 csMplsLspOctets	1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.4	Counter32	read-only	The number of octets that have been forwarded over current LSP active path. The number reported is not realtime, may subject to several minutes delay. The delay is controllable by mpls statistics gathering interval, which by default is once every 5 minutes. If mpls statistics gathering is not enabled, this number will not increment.
I32 csMplsLspOperationalPaths	1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.15	Integer32	read-create	The number of operational paths for this LSP. This includes the path currently active, as well as operational standby paths.
INT csMplsLspOperationStatus	1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.39	INTEGER	read-only	This object contains the operational status for the LSP
C32 csMplsLspPackets	1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.5	Counter32	read-only	The number of packets that have been forwarded over current LSP active path. The number reported is not realtime, may subject to several minutes delay. The delay is controllable by mpls statistics gathering interval, which by default is once every 5 minutes. If mpls statistics gathering is not enabled, this number will not increment.
C32 csMplsLspPathChanges	1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.11	Counter32	read-only	The number of path changes this LSP has had. For every path change (path down, path up, path change), a corresponding syslog/trap (if enabled) is generated for it.
I32 csMplsLspPreference	1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.34	Integer32	not-accessible	Used to set the Lsp Preference Value
TIM csMplsLspPrimaryTimeUp	1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.8	TimeStamp	read-create	The total time in 10-millisecond units that this LSP's primary path has been operational. For example, the percentage contribution of the primary path to the operational time is given by (mplsLspPrimaryTimeUp/mplsLspTimeUp * 100) %.
ROW csMplsLspRowStatus	1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.35	RowStatus	read-create	A row status type for the Lsp Table
I32 csMplsLspStandbyPaths	1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.14	Integer32	read-create	The number of standby paths configured for this LSP.
INT csMplsLspState	1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.3	INTEGER	read-create	The operational state of the LSP.
csMplsLspTable	1.3.6.1.4.1.3085.3.1.4.2.10.2.1		not-accessible	List of Configured Label Switched Paths.
TIM csMplsLspTimeUp	1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.7	TimeStamp	read-create	The total time in 10-millisecond units that this LSP has been operational. For example, the percentage up time can be determined by computing (mplsLspTimeUp/mplsLspAge * 100 %).
IP csMplsLspTo	1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.17	IpAddress	read-create	Destination IP address of this LSP.
C32 csMplsLspTransitions	1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.9	Counter32	read-only	The number of state transitions (up -> down and down -> up) this LSP has undergone.
INT csMplsMetricStyle	1.3.6.1.4.1.3085.3.1.4.2.10.2.4.1.1	INTEGER	read-create	This entry is used to define the metric-style. wide => csMplsMetricStyle = 1, narrow => csMplsMetricStyle = 2, transition => csMplsMetricStyle = 3
INT csMplsOspfAreaAdminStatus	1.3.6.1.4.1.3085.3.1.4.2.10.2.7.1.2	INTEGER	read-create	This entry is used to indicate if mpls is enabled or disabled on area. This entry is used in conjunction with csMplsOspfAreaId.
ARE csMplsOspfAreaId	1.3.6.1.4.1.3085.3.1.4.2.10.2.7.1.1	AreaID	not-accessible	A router running MPLS is configured to flood traffic-engineering for OSPF area csMplsOspfAreaId
csMplsOspfExtensionsEntry	1.3.6.1.4.1.3085.3.1.4.2.10.2.7.1		not-accessible	This entry is indexed by the VPN and VrID
ROW csMplsOspfExtensionsRowStatus	1.3.6.1.4.1.3085.3.1.4.2.10.2.7.1.3	RowStatus	read-create	The existence state of this table. This object follows the Row Status behaviour.
csMplsOspfExtensionsTable	1.3.6.1.4.1.3085.3.1.4.2.10.2.7		not-accessible	This table is used to support Ospf Extensions for Mpls
I32 csMplsOspfExtensionsTableEnd	1.3.6.1.4.1.3085.3.1.4.2.10.2.8	Integer32	read-only	End of this group. value undefined
INT csMplsOspfOpaqueAdminStatus	1.3.6.1.4.1.3085.3.1.4.2.10.2.4.1.3	INTEGER	read-create	This entry is used to indicate if Ospf Opaque is enabled or disabled on a router.
I32 csMplsPathAffinity	1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.32	Integer32	read-create	Used to configure an affinity for an MPLS traffic engineering tunnel
I32 csMplsPathAffinityMask	1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.33	Integer32	read-create	Used to configure affinity mask value for an MPLS traffic engineering tunnel
I32 csMplsPathBandwidth	1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.20	Integer32	read-create	The configured bandwidth for this LSP, in units of thousands of bits per second (Kbps).
INT csMplsPathBgpAutoRouteAnnounce	1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.29	INTEGER	read-create	Used to specify that the IGP should use the tunnel (if the tunnel is up) in its enhanced shortest path first (SPF) calculation.
INT csMplsPathCOS	1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.21	INTEGER	read-create	The configured Class Of Service on this path. If the value is between 0 and 7 inclusive, this value will be inserted in the 3 bit COS field in the label. If the value is 255, the value in the COS field of the label will depend on other factors. This field is meaningless if csMplsPathName or csMplsPathIdentifier is not supplied
INT csMplsPathCosValue	1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.41	INTEGER	read-create	Cos Value for this path
INT csMplsPathDropPrecedence	1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.42	INTEGER	read-create	Drop precedence for this path
INT csMplsPathDynamic	1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.27	INTEGER	read-create	This is used to configure a dynamic path
I32 csMplsPathExclude	1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.23	Integer32	read-create	This is a configured set of colors (administrative groups) specified as a bit vector (i.e., bit n is 1 if color n is in the set, where n = 0 is the LSB). For each link that this path goes through, the link MUST have colors associated with it, and the intersection of the link's colors and the 'exclude' set MUST be null.This field is meaningless if csMplsPathName or csMplsPathIdentifier is not supplied
INT csMplsPathExpValue	1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.40	INTEGER	read-create	Exp Value to use for this path
INT csMplsPathHoldPriority	1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.25	INTEGER	read-create	The hold priority configured for this path.
INT csMplsPathHotStandby	1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.43	INTEGER	read-create	Mark this path as Hot Standby
I32 csMplsPathIdentifier	1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.28	Integer32	read-create	Path-option explicit-path identifier
I32 csMplsPathInclude	1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.22	Integer32	read-create	This is a configured set of colors (administrative groups) specified as a bit vector (i.e., bit n is 1 if color n is in the set, where n = 0 is the LSB). For each link that this path goes through, the link MUST have colors associated with it, and the intersection of the link's colors and the 'include' set MUST be non-null. This field is meaningless if csMplsPathName or csMplsPathIdentifier is not supplied
INT csMplsPathIsisAutoRouteAnnounce	1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.36	INTEGER	read-create	Used to specify that the IGP should use the tunnel (if the tunnel is up) in its enhanced shortest path first (SPF) calculation.Used by Isis.
INT csMplsPathMetricMode	1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.30	INTEGER	read-create	Used to specify the MPLS traffic engineering tunnel metric type that the IGP enhanced SPF calculation uses. MetricMode can be absolute or relative
I32 csMplsPathMetricValue	1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.31	Integer32	read-create	Absolute metric mode the user can enter a positive value and for relative metric mode the user can enter a positive negative or zero value
STR csMplsPathName	1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.18	DisplayString	read-create	The name of the active path for this LSP, if any. If there is none, the name should be empty.
INT csMplsPathOspfAutoRouteAnnounce	1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.37	INTEGER	read-create	Used to specify that the IGP should use the tunnel (if the tunnel is up) in its enhanced shortest path first (SPF) calculation. Used by Ospf.
INT csMplsPathPwe3AutoRouteAnnounce	1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.45	INTEGER	read-create	Used to specify that the IGP should use the tunnel (if the tunnel is up) in its enhanced shortest path first (SPF) calculation
INT csMplsPathRecordRoute	1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.26	INTEGER	read-create	This is used to set record route
INT csMplsPathSetupPriority	1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.24	INTEGER	read-create	The setup priority configured for this path.
INT csMplsPathType	1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.19	INTEGER	read-create	The type of path that is active, i.e., a primary path, a standby path, or a generic secondary path. This field is meaningless if csMplsPathName or csMplsPathIdentifier is not supplied
INT csMplsPathVpnAutoRouteAnnounce	1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.44	INTEGER	read-create	Used to specify that the IGP should use the tunnel (if the tunnel is up) in its enhanced shortest path first (SPF) calculation
INT csMplsTrafficEnggAdminStatus	1.3.6.1.4.1.3085.3.1.4.2.10.2.6.1.2	INTEGER	read-create	This entry is used to indicate if mpls traffic-eng is enabled or disabled on a level. This entry is used in conjunction with csMplsTrafficEnggLevel.
INT csMplsTrafficEnggLevel	1.3.6.1.4.1.3085.3.1.4.2.10.2.6.1.1	INTEGER	not-accessible	This entry is used to define the level on which MPLS traffic-eng will be used. Level-1 only => csMplsExtLevel = 1, Level-2 only => csMplsExtLevel = 2
INT csMplsVrAdminStatus	1.3.6.1.4.1.3085.3.1.4.2.10.2.3.1.1	INTEGER	read-create	Indicates the administrator's intent as to whether MPLS should be enabled or disabled on this router.
csMplsVrConfEntry	1.3.6.1.4.1.3085.3.1.4.2.10.2.3.1		not-accessible	This entry is indexed by the VPN and VR ID
I32 csMplsVrConfOpCode	1.3.6.1.4.1.3085.3.1.4.2.10.2.3.1.4	Integer32	read-create	Used for Mpls Trace Commands only
ROW csMplsVrConfRowStatus	1.3.6.1.4.1.3085.3.1.4.2.10.2.3.1.5	RowStatus	read-create	The existence state of this table. This object follows the Row Status behaviour
csMplsVrConfTable	1.3.6.1.4.1.3085.3.1.4.2.10.2.3		not-accessible	This table is used to Configure Mpls on a Virtual Router.
I32 csMplsVrEventLogArea	1.3.6.1.4.1.3085.3.1.4.2.10.2.3.1.3	Integer32	read-create	This object is used to set the area of event logs for MPLS
I32 csMplsVrEventLogLevel	1.3.6.1.4.1.3085.3.1.4.2.10.2.3.1.2	Integer32	read-create	This object is used to set the level of details for event logs for MPLS
csMplsVrPathConfEntry	1.3.6.1.4.1.3085.3.1.4.2.10.2.5.1		not-accessible	This entry is indexed by the VPN and VR ID
ROW csMplsVrPathConfRowStatus	1.3.6.1.4.1.3085.3.1.4.2.10.2.5.1.4	RowStatus	read-create	The existence state of this table. This object follows the Row Status behaviour
csMplsVrPathConfTable	1.3.6.1.4.1.3085.3.1.4.2.10.2.5		not-accessible	This table is used to configure Explicitly Routed Path
OCT csMplsVrPathExplicitRoute	1.3.6.1.4.1.3085.3.1.4.2.10.2.5.1.2	OCTET STRING	read-create	The explicit route used to set up this LSP. This may either be the route configured by the user, or a route automatically computed to satisfy constraints set by the user. This field is a displayable string in the format of XXX.XXX.XXX.XXX S/L repeated for each explicit address. The S/L character stands for Strict/Loose route. This field is meaningless if csMplsVrPathIdentifier or csMplsVrPathName is not supplied
I32 csMplsVrPathIdentifier	1.3.6.1.4.1.3085.3.1.4.2.10.2.5.1.3	Integer32	read-create	Explicit-path Identifier
STR csMplsVrPathName	1.3.6.1.4.1.3085.3.1.4.2.10.2.5.1.1	DisplayString	not-accessible	Explicit-path Name
OCT csMplsVrPathRecordRoute	1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.38	OCTET STRING	read-only	This entry records the path recorded by Rsvp for the tunnel. This field is a displayable string in the format of XXX.XXX.XXX.XXX repeated for each explicit address.
INT csOc3AdminStatus	1.3.6.1.4.1.3085.3.1.3.3.1.1.1.19	INTEGER	read-write	This object is used to enable/disable this Ds3 port.
INT csOc3AlarmControl	1.3.6.1.4.1.3085.3.1.3.3.1.1.1.17	INTEGER	read-write
INT csOc3ApsActivePort	1.3.6.1.4.1.3085.3.1.3.3.1.1.1.16	INTEGER	read-only	This object indicates which of the internal port is currently active. The non-active one is used for protection.
INT csOc3ApsControl	1.3.6.1.4.1.3085.3.1.3.3.1.1.1.14	INTEGER	read-write
INT csOc3ApsForce	1.3.6.1.4.1.3085.3.1.3.3.1.1.1.15	INTEGER	read-write	Force protection switch. When set to 'forceToSwitch' it switches the active port between the two internal ports indicated by csOc3ApsActivePort object. NOTE: This is an action object. Read operation returns 'none'.
C64 csOc3AtmCurrentCorrectedHEC	1.3.6.1.4.1.3085.3.1.3.3.8.1.1.4	Counter64	read-only	The counter indicates the number of corrected HEC cells at OC3-ATM interface
C64 csOc3AtmCurrentIdleCells	1.3.6.1.4.1.3085.3.1.3.3.8.1.1.3	Counter64	read-only	The counter indicates the number of idle cells at OC3-ATM interface
C64 csOc3AtmCurrentRecievedCells	1.3.6.1.4.1.3085.3.1.3.3.8.1.1.2	Counter64	read-only	The counter indicates the number of received cells at OC3-ATM interface
csOc3AtmCurrentStatsEntry	1.3.6.1.4.1.3085.3.1.3.3.8.1.1		not-accessible	An entry in the OC3 statistics counter table.
csOc3AtmCurrentStatsTable	1.3.6.1.4.1.3085.3.1.3.3.8.1		not-accessible	The OC3 ATM statistics counter table.
I32 csOc3AtmCurrentStatsTableEnd	1.3.6.1.4.1.3085.3.1.3.3.8.2	Integer32	read-only	End of this group. value undefined
C64 csOc3AtmCurrentTransmittedCells	1.3.6.1.4.1.3085.3.1.3.3.8.1.1.1	Counter64	read-only	The counter indicates the number of transmitted cells at OC3-ATM interface
C64 csOc3AtmCurrentUnCorrectedHEC	1.3.6.1.4.1.3085.3.1.3.3.8.1.1.5	Counter64	read-only	The counter indicates the number of uncorrected HEC cells at OC3-ATM interface
C64 csOc3AtmIntervalCorrectedHEC	1.3.6.1.4.1.3085.3.1.3.3.8.3.1.5	Counter64	read-only	The counter indicates the number of corrected HEC cells at OC3-ATM interface in a given interval number
C64 csOc3AtmIntervalIdleCells	1.3.6.1.4.1.3085.3.1.3.3.8.3.1.4	Counter64	read-only	The counter indicates the number of idle cells at OC3-ATM interface in a given interval number
I32 csOc3AtmIntervalNumber	1.3.6.1.4.1.3085.3.1.3.3.8.3.1.1	Integer32	not-accessible	A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1.
C64 csOc3AtmIntervalRecievedCells	1.3.6.1.4.1.3085.3.1.3.3.8.3.1.3	Counter64	read-only	The counter indicates the number of received cells at OC3-ATM interface in a given interval number
csOc3AtmIntervalStatsEntry	1.3.6.1.4.1.3085.3.1.3.3.8.3.1		not-accessible	An entry in the OC3 ATM Interval statistics counter table.
csOc3AtmIntervalStatsTable	1.3.6.1.4.1.3085.3.1.3.3.8.3		not-accessible	The OC3 ATM Interval statistics counter table.
I32 csOc3AtmIntervalStatsTableEnd	1.3.6.1.4.1.3085.3.1.3.3.8.4	Integer32	read-only	End of this group. value undefined
C64 csOc3AtmIntervalTransmittedCells	1.3.6.1.4.1.3085.3.1.3.3.8.3.1.2	Counter64	read-only	The counter indicates the number of transmitted cells at OC3-ATM interface in a given interval number
C64 csOc3AtmIntervalUnCorrectedHEC	1.3.6.1.4.1.3085.3.1.3.3.8.3.1.6	Counter64	read-only	The counter indicates the number of uncorrected HEC cells at OC3-ATM interface in a given interval number
T/F csOc3AtmIntervalValidData	1.3.6.1.4.1.3085.3.1.3.3.8.3.1.7	TruthValue	read-only	This variable indicates if the data for this interval is valid.
INT csOc3ClockSource	1.3.6.1.4.1.3085.3.1.3.3.1.1.1.4	INTEGER	read-write	This object identifies the source of the clock signal for this OC3 port.
csOc3ConfigEntry	1.3.6.1.4.1.3085.3.1.3.3.1.1.1		not-accessible	An entry in the DS3 Configuration table.
csOc3ConfigTable	1.3.6.1.4.1.3085.3.1.3.3.1.1		not-accessible	The OC3 configuration table.
INT csOc3CrcType	1.3.6.1.4.1.3085.3.1.3.3.1.1.1.5	INTEGER	read-write	This object identifies the type of CRC used on this OC3 port. This is only used by Packet Over Sonet.
STR csOc3FarEndJ1	1.3.6.1.4.1.3085.3.1.3.3.1.1.1.10	DisplayString	read-write	The expected path trace of the far end interface.
INT csOc3FarEndPerfMonControl	1.3.6.1.4.1.3085.3.1.3.3.1.1.1.13	INTEGER	read-write
I32 csOc3InvalidIntervals	1.3.6.1.4.1.3085.3.1.3.3.1.1.1.23	Integer32	read-only	This object indicates the number of previous 15-minute intervals for which data was not able to be collected.
PER csOc3LineCurrentCVs	1.3.6.1.4.1.3085.3.1.3.3.3.1.1.4	PerfCurrentCount	read-only	The counter associated with the number of Coding Violations encountered by a SONET/SDH Line in the current 15 minute interval.
csOc3LineCurrentEntry	1.3.6.1.4.1.3085.3.1.3.3.3.1.1		not-accessible	An entry in the SONET/SDH Line Current table.
PER csOc3LineCurrentESs	1.3.6.1.4.1.3085.3.1.3.3.3.1.1.2	PerfCurrentCount	read-only	The counter associated with the number of Errored Seconds encountered by a SONET/SDH Line in the current 15 minute interval.
PER csOc3LineCurrentFCs	1.3.6.1.4.1.3085.3.1.3.3.3.1.1.6	PerfCurrentCount	read-only	The counter associated with the number of failure counts encountered by a SONET/SDH Line in the current 15 minute interval.
PER csOc3LineCurrentSESs	1.3.6.1.4.1.3085.3.1.3.3.3.1.1.3	PerfCurrentCount	read-only	The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Line in the current 15 minute interval.
I32 csOc3LineCurrentStatus	1.3.6.1.4.1.3085.3.1.3.3.3.1.1.1	Integer32	read-only	This variable indicates the status of the interface. The sonetLineCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The sonetLineNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 csOc3LineNoDefect 2 csOc3LineAIS 4 csOc3LineRDI
csOc3LineCurrentTable	1.3.6.1.4.1.3085.3.1.3.3.3.1		not-accessible	The SONET/SDH Line Current table.
PER csOc3LineCurrentUASs	1.3.6.1.4.1.3085.3.1.3.3.3.1.1.5	PerfCurrentCount	read-only	The counter associated with the number of Unavailable Seconds encountered by a SONET/SDH Line in the current 15 minute interval.
PER csOc3LineDayCVs	1.3.6.1.4.1.3085.3.1.3.3.3.3.1.3	PerfCurrentCount	read-only	The counter associated with the number of Coding Violations encountered by a SONET/SDH Line for the day.
csOc3LineDayEntry	1.3.6.1.4.1.3085.3.1.3.3.3.3.1		not-accessible	An entry in the SONET/SDH Line Day table.
PER csOc3LineDayESs	1.3.6.1.4.1.3085.3.1.3.3.3.3.1.1	PerfCurrentCount	read-only	The counter associated with the number of Errored Seconds encountered by a SONET/SDH Line for the day.
PER csOc3LineDayFCs	1.3.6.1.4.1.3085.3.1.3.3.3.3.1.5	PerfCurrentCount	read-only	The counter associated with the number of failure counts encountered by a SONET/SDH Line for the day.
PER csOc3LineDaySESs	1.3.6.1.4.1.3085.3.1.3.3.3.3.1.2	PerfCurrentCount	read-only	The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Line for the day.
csOc3LineDayTable	1.3.6.1.4.1.3085.3.1.3.3.3.3		not-accessible	The SONET/SDH Line Day table.
PER csOc3LineDayUASs	1.3.6.1.4.1.3085.3.1.3.3.3.3.1.4	PerfCurrentCount	read-only	The counter associated with the number of Unavailable Seconds encountered by a SONET/SDH Line for the day.
NUM csOc3LineIntervalCVs	1.3.6.1.4.1.3085.3.1.3.3.3.2.1.4	PerfIntervalCount	read-only	The counter associated with the number of Coding Violations encountered by a SONET/SDH Line in a particular 15-minute interval in the past 24 hours.
csOc3LineIntervalEntry	1.3.6.1.4.1.3085.3.1.3.3.3.2.1		not-accessible	An entry in the SONET/SDH Line Interval table.
NUM csOc3LineIntervalESs	1.3.6.1.4.1.3085.3.1.3.3.3.2.1.2	PerfIntervalCount	read-only	The counter associated with the number of Errored Seconds encountered by a SONET/SDH Line in a particular 15-minute interval in the past 24 hours.
NUM csOc3LineIntervalFCs	1.3.6.1.4.1.3085.3.1.3.3.3.2.1.7	PerfIntervalCount	read-only	The counter associated with the number of failure counts encountered by a SONET/SDH Line in a particular 15-minute interval in the past 24 hours.
I32 csOc3LineIntervalNumber	1.3.6.1.4.1.3085.3.1.3.3.3.2.1.1	Integer32	not-accessible	A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1.
NUM csOc3LineIntervalSESs	1.3.6.1.4.1.3085.3.1.3.3.3.2.1.3	PerfIntervalCount	read-only	The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Line in a particular 15-minute interval in the past 24 hours.
csOc3LineIntervalTable	1.3.6.1.4.1.3085.3.1.3.3.3.2		not-accessible	The SONET/SDH Line Interval table.
NUM csOc3LineIntervalUASs	1.3.6.1.4.1.3085.3.1.3.3.3.2.1.5	PerfIntervalCount	read-only	The counter associated with the number of Unavailable Seconds encountered by a SONET/SDH Line in a particular 15-minute interval in the past 24 hours.
T/F csOc3LineIntervalValidData	1.3.6.1.4.1.3085.3.1.3.3.3.2.1.6	TruthValue	read-only	This variable indicates if the data for this interval is valid.
PER csOc3LinePrevDayCVs	1.3.6.1.4.1.3085.3.1.3.3.3.4.1.3	PerfCurrentCount	read-only	The counter associated with the number of Coding Violations encountered by a SONET/SDH Line for the previous day.
csOc3LinePrevDayEntry	1.3.6.1.4.1.3085.3.1.3.3.3.4.1		not-accessible	An entry in the SONET/SDH Line Previous Day table.
PER csOc3LinePrevDayESs	1.3.6.1.4.1.3085.3.1.3.3.3.4.1.1	PerfCurrentCount	read-only	The counter associated with the number of Errored Seconds encountered by a SONET/SDH Line for the previous day.
PER csOc3LinePrevDayFCs	1.3.6.1.4.1.3085.3.1.3.3.3.4.1.5	PerfCurrentCount	read-only	The counter associated with the number of failure counts encountered by a SONET/SDH Line for the previous day.
PER csOc3LinePrevDaySESs	1.3.6.1.4.1.3085.3.1.3.3.3.4.1.2	PerfCurrentCount	read-only	The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Line for the previous day.
csOc3LinePrevDayTable	1.3.6.1.4.1.3085.3.1.3.3.3.4		not-accessible	The SONET/SDH Line Day table.
PER csOc3LinePrevDayUASs	1.3.6.1.4.1.3085.3.1.3.3.3.4.1.4	PerfCurrentCount	read-only	The counter associated with the number of Unavailable Seconds encountered by a SONET/SDH Line for the previous day.
INT csOc3LineS1S0	1.3.6.1.4.1.3085.3.1.3.3.1.1.1.7	INTEGER	read-write	This object identifies the payload pointer byte (s1s0) used on this OC3 port. If this object is set to oc3c(1), the value sent within the s1s0 (payload pointer byte) element of the frame header is 0. If this object is set to au4(2), the value of the s1s0 element is 2.
INT csOc3Loopback	1.3.6.1.4.1.3085.3.1.3.3.1.1.1.18	INTEGER	read-write	The current loopback state of the SONET/SDH interface. The values mean: noLoop Not in the loopback state. A device that is not capable of performing a loopback on this interface shall always return this value. facilityLoop The received signal at this interface is looped back out through the corresponding transmitter in the return direction. terminalLoop The signal that is about to be transmitted is connected to the associated incoming receiver.
INT csOc3MediumLineType	1.3.6.1.4.1.3085.3.1.3.3.1.1.1.28	INTEGER	read-only	This object describes the line type for this interface. The line types are Short and Long Range Single Mode fiber or Multi-Mode fiber interfaces, and coax and UTP for electrical interfaces. The value sonetOther should be used when the Line Type is not one of the listed values.
I32 csOc3ModuleIndex	1.3.6.1.4.1.3085.3.1.3.3.1.1.1.2	Integer32	not-accessible	This object identifies the module on the OC3 blade
INT csOc3NearEndPerfMonControl	1.3.6.1.4.1.3085.3.1.3.3.1.1.1.12	INTEGER	read-write
OPE csOc3OperStatus	1.3.6.1.4.1.3085.3.1.3.3.1.1.1.20	OperStatus	read-only	This object indicates the current operational status of this Ds3 port.
INT csOc3PathC2	1.3.6.1.4.1.3085.3.1.3.3.1.1.1.8	INTEGER	read-only	This object identifies the path signal identifier used on this OC3 port. If this object is set to pppOrHdlc(1), the value sent within the c2 (path signal identifier) element of the frame header is 0xCF. If this object is set to atm(2), the value of the c2 element is 0x13.
PER csOc3PathCurrentCVs	1.3.6.1.4.1.3085.3.1.3.3.5.1.1.5	PerfCurrentCount	read-only	The counter associated with the number of Coding Violations encountered by a SONET/SDH Path in the current 15 minute interval.
csOc3PathCurrentEntry	1.3.6.1.4.1.3085.3.1.3.3.5.1.1		not-accessible	An entry in the SONET/SDH Path Current table.
PER csOc3PathCurrentESs	1.3.6.1.4.1.3085.3.1.3.3.5.1.1.3	PerfCurrentCount	read-only	The counter associated with the number of Errored Seconds encountered by a SONET/SDH Path in the current 15 minute interval.
PER csOc3PathCurrentFCs	1.3.6.1.4.1.3085.3.1.3.3.5.1.1.7	PerfCurrentCount	read-only	The counter associated with the number of failure counts encountered by a Path in the current 15 minute interval.
PER csOc3PathCurrentSESs	1.3.6.1.4.1.3085.3.1.3.3.5.1.1.4	PerfCurrentCount	read-only	The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Path in the current 15 minute interval.
I32 csOc3PathCurrentStatus	1.3.6.1.4.1.3085.3.1.3.3.5.1.1.2	Integer32	read-only	This variable indicates the status of the interface. The sonetPathCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The sonetPathNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 sonetPathNoDefect 2 sonetPathSTSLOP 4 sonetPathSTSAIS 8 sonetPathSTSRDI 16 sonetPathUnequipped 32 sonetPathSignalLabelMismatch
csOc3PathCurrentTable	1.3.6.1.4.1.3085.3.1.3.3.5.1		not-accessible	The SONET/SDH Path Current table.
PER csOc3PathCurrentUASs	1.3.6.1.4.1.3085.3.1.3.3.5.1.1.6	PerfCurrentCount	read-only	The counter associated with the number of Unavailable Seconds encountered by a Path in the current 15 minute interval.
INT csOc3PathCurrentWidth	1.3.6.1.4.1.3085.3.1.3.3.5.1.1.1	INTEGER	read-only	A value that indicates the type of the SONET/SDH Path. For SONET, the assigned types are the STS-Nc SPEs, where N = 1, 3, 12, 24, and 48. STS-1 is equal to 51.84 Mbps. For SDH, the assigned types are the STM-Nc VCs, where N = 1, 4, and 16.
PER csOc3PathDayCVs	1.3.6.1.4.1.3085.3.1.3.3.5.3.1.3	PerfCurrentCount	read-only	The counter associated with the number of Coding Violations encountered by a SONET/SDH Path for the day.
csOc3PathDayEntry	1.3.6.1.4.1.3085.3.1.3.3.5.3.1		not-accessible	An entry in the SONET/SDH Path Day table.
PER csOc3PathDayESs	1.3.6.1.4.1.3085.3.1.3.3.5.3.1.1	PerfCurrentCount	read-only	The counter associated with the number of Errored Seconds encountered by a SONET/SDH Path for the day.
PER csOc3PathDayFCs	1.3.6.1.4.1.3085.3.1.3.3.5.3.1.5	PerfCurrentCount	read-only	The counter associated with the number of failure counts encountered by a Path for the day.
PER csOc3PathDaySESs	1.3.6.1.4.1.3085.3.1.3.3.5.3.1.2	PerfCurrentCount	read-only	The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Path for the day.
csOc3PathDayTable	1.3.6.1.4.1.3085.3.1.3.3.5.3		not-accessible	The SONET/SDH Path Day table.
PER csOc3PathDayUASs	1.3.6.1.4.1.3085.3.1.3.3.5.3.1.4	PerfCurrentCount	read-only	The counter associated with the number of Unavailable Seconds encountered by a Path for the day.
NUM csOc3PathIntervalCVs	1.3.6.1.4.1.3085.3.1.3.3.5.2.1.4	PerfIntervalCount	read-only	The counter associated with the number of Coding Violations encountered by a SONET/SDH Path in a particular 15-minute interval in the past 24 hours.
csOc3PathIntervalEntry	1.3.6.1.4.1.3085.3.1.3.3.5.2.1		not-accessible	An entry in the SONET/SDH Path Interval table.
NUM csOc3PathIntervalESs	1.3.6.1.4.1.3085.3.1.3.3.5.2.1.2	PerfIntervalCount	read-only	The counter associated with the number of Errored Seconds encountered by a SONET/SDH Path in a particular 15-minute interval in the past 24 hours.
NUM csOc3PathIntervalFCs	1.3.6.1.4.1.3085.3.1.3.3.5.2.1.7	PerfIntervalCount	read-only	The counter associated with the number of failure counts encountered by a Path in a particular 15-minute interval in the past 24 hours.
I32 csOc3PathIntervalNumber	1.3.6.1.4.1.3085.3.1.3.3.5.2.1.1	Integer32	not-accessible	A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1.
NUM csOc3PathIntervalSESs	1.3.6.1.4.1.3085.3.1.3.3.5.2.1.3	PerfIntervalCount	read-only	The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Path in a particular 15-minute interval in the past 24 hours.
csOc3PathIntervalTable	1.3.6.1.4.1.3085.3.1.3.3.5.2		not-accessible	The SONET/SDH Path Interval table.
NUM csOc3PathIntervalUASs	1.3.6.1.4.1.3085.3.1.3.3.5.2.1.5	PerfIntervalCount	read-only	The counter associated with the number of Unavailable Seconds encountered by a Path in a particular 15-minute interval in the past 24 hours.
T/F csOc3PathIntervalValidData	1.3.6.1.4.1.3085.3.1.3.3.5.2.1.6	TruthValue	read-only	This variable indicates if the data for this interval is valid.
STR csOc3PathJ1	1.3.6.1.4.1.3085.3.1.3.3.1.1.1.9	DisplayString	read-write	This object is the path trace sent in the J1 byte of path overhead. It is padded by the OC3 driver with and to make up the 64-byte length.
PER csOc3PathPrevDayCVs	1.3.6.1.4.1.3085.3.1.3.3.5.4.1.3	PerfCurrentCount	read-only	The counter associated with the number of Coding Violations encountered by a SONET/SDH Path for the previous day.
csOc3PathPrevDayEntry	1.3.6.1.4.1.3085.3.1.3.3.5.4.1		not-accessible	An entry in the SONET/SDH Path Day table.
PER csOc3PathPrevDayESs	1.3.6.1.4.1.3085.3.1.3.3.5.4.1.1	PerfCurrentCount	read-only	The counter associated with the number of Errored Seconds encountered by a SONET/SDH Path for the previous day.
PER csOc3PathPrevDayFCs	1.3.6.1.4.1.3085.3.1.3.3.5.4.1.5	PerfCurrentCount	read-only	The counter associated with the number of failure counts encountered by a Path for the previous day.
PER csOc3PathPrevDaySESs	1.3.6.1.4.1.3085.3.1.3.3.5.4.1.2	PerfCurrentCount	read-only	The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Path for the previous day.
csOc3PathPrevDayTable	1.3.6.1.4.1.3085.3.1.3.3.5.4		not-accessible	The SONET/SDH Path Previous Day table.
PER csOc3PathPrevDayUASs	1.3.6.1.4.1.3085.3.1.3.3.5.4.1.4	PerfCurrentCount	read-only	The counter associated with the number of Unavailable Seconds encountered by a Path for the previous day.
I32 csOc3PortIndex	1.3.6.1.4.1.3085.3.1.3.3.1.1.1.3	Integer32	not-accessible	This object identifies the location of the OC3 Port on the blade identified by csOc3SlotIndex, csOc3ModuleIndex. Together with csOc3SlotIndex, it uniquely identifies a physical port.
INT csOc3PosEmptyCellType	1.3.6.1.4.1.3085.3.1.3.3.1.1.1.25	INTEGER	read-write	This object is used to select the type of empty cell to be transmitted. It is deprecated due to not being supported in POS.
INT csOc3PosEncapType	1.3.6.1.4.1.3085.3.1.3.3.1.1.1.24	INTEGER	read-write	This object specifies the encapsulation used on this port. If the encapsulation type is frameRelay(2), use the csFrameRelayTable to configure the Frame Relay specific parameters.
I32 csOc3PosMaxPacketSize	1.3.6.1.4.1.3085.3.1.3.3.1.1.1.26	Integer32	read-write	This object specifies the maximum packet size required for this port. This object applies to POS only.
OPE csOc3PosOperStatus	1.3.6.1.4.1.3085.3.1.3.3.1.1.1.27	OperStatus	read-only	This object indicates the current operational status of this channel. It is deprecated in favor of using csOc3AdminStatus instead.
C64 csOc3PosRcvAbortedFrames	1.3.6.1.4.1.3085.3.1.3.3.7.1.1.3	Counter64	read-only	The counter indicates the number of aborted frames received.
C64 csOc3PosRcvBytes	1.3.6.1.4.1.3085.3.1.3.3.7.1.1.1	Counter64	read-only	The counter associated with the number of bytes written to receive FIFO.
C64 csOc3PosRcvFrameFCSError	1.3.6.1.4.1.3085.3.1.3.3.7.1.1.4	Counter64	read-only	The counter indicates the number of received frames with FCS error.
C64 csOc3PosRcvFrameMaxPacketError	1.3.6.1.4.1.3085.3.1.3.3.7.1.1.6	Counter64	read-only	The counter indicates the number of received frames violating the maximum packet length.
C64 csOc3PosRcvFrameMinPacketError	1.3.6.1.4.1.3085.3.1.3.3.7.1.1.5	Counter64	read-only	The counter indicates the number of received frames violating the minimal packet length.
C64 csOc3PosRcvFrames	1.3.6.1.4.1.3085.3.1.3.3.7.1.1.2	Counter64	read-only	The counter indicates the number of frames successfully received in a 15 minute interval.
C64 csOc3PosSentBytes	1.3.6.1.4.1.3085.3.1.3.3.7.1.1.7	Counter64	read-only	The counter indicates the number of bytes trasmitted.
C64 csOc3PosSentFrames	1.3.6.1.4.1.3085.3.1.3.3.7.1.1.8	Counter64	read-only	The counter indicates the number of frames trasmitted.
C64 csOc3PosSentFrameUnderrunAborted	1.3.6.1.4.1.3085.3.1.3.3.7.1.1.10	Counter64	read-only	The counter indicates the number of transmit frames aborted due to FIFO underrun.
C64 csOc3PosSentFrameUserAborted	1.3.6.1.4.1.3085.3.1.3.3.7.1.1.9	Counter64	read-only	The counter indicates the number of transmit frames aborted by the user.
csOc3PosStatsEntry	1.3.6.1.4.1.3085.3.1.3.3.7.1.1		not-accessible	An entry in the OC3/POS statistics counter table.
csOc3PosStatsTable	1.3.6.1.4.1.3085.3.1.3.3.7.1		not-accessible	The OC3/POS statistics counter table.
STR csOc3ReceivedPathJ1	1.3.6.1.4.1.3085.3.1.3.3.1.1.1.29	DisplayString	read-only	The actual received path trace of the far end interface.
INT csOc3Scramble	1.3.6.1.4.1.3085.3.1.3.3.1.1.1.11	INTEGER	read-write	This object controls the scrambling feature on this OC3 port. If this object is enabled, the SPE payload will be scrambled. If this object is diabled, the SPE payload will not be scrambled. SPE payload refers to that of either ATM or POS depending on the value of csOc3PathC2.
PER csOc3SectionCurrentCVs	1.3.6.1.4.1.3085.3.1.3.3.2.1.1.5	PerfCurrentCount	read-only	The counter associated with the number of Coding Violations encountered by a SONET/SDH Section in the current 15 minute interval.
csOc3SectionCurrentEntry	1.3.6.1.4.1.3085.3.1.3.3.2.1.1		not-accessible	An entry in the SONET/SDH Section Current table.
PER csOc3SectionCurrentESs	1.3.6.1.4.1.3085.3.1.3.3.2.1.1.2	PerfCurrentCount	read-only	The counter associated with the number of Errored Seconds encountered by a SONET/SDH Section in the current 15-minute interval.
PER csOc3SectionCurrentSEFSs	1.3.6.1.4.1.3085.3.1.3.3.2.1.1.4	PerfCurrentCount	read-only	The counter associated with the number of Severely Errored Framing Seconds encountered by a SONET/SDH Section in the current 15 minute interval.
PER csOc3SectionCurrentSESs	1.3.6.1.4.1.3085.3.1.3.3.2.1.1.3	PerfCurrentCount	read-only	The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Section in the current 15-minute interval.
I32 csOc3SectionCurrentStatus	1.3.6.1.4.1.3085.3.1.3.3.2.1.1.1	Integer32	read-only	This variable indicates the status of the interface. The sonetSectionCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The csOc3SectionNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 csOc3SectionNoDefect 2 csOc3SectionLOS 4 csOc3SectionLOF
csOc3SectionCurrentTable	1.3.6.1.4.1.3085.3.1.3.3.2.1		not-accessible	The SONET/SDH Section Current table.
PER csOc3SectionDayCVs	1.3.6.1.4.1.3085.3.1.3.3.2.3.1.4	PerfCurrentCount	read-only	The counter associated with the number of Coding Violations encountered by a SONET/SDH Section for the day.
csOc3SectionDayEntry	1.3.6.1.4.1.3085.3.1.3.3.2.3.1		not-accessible	An entry in the SONET/SDH Section Day table.
PER csOc3SectionDayESs	1.3.6.1.4.1.3085.3.1.3.3.2.3.1.1	PerfCurrentCount	read-only	The counter associated with the number of Errored Seconds encountered by a SONET/SDH Section for the day.
PER csOc3SectionDaySEFSs	1.3.6.1.4.1.3085.3.1.3.3.2.3.1.3	PerfCurrentCount	read-only	The counter associated with the number of Severely Errored Framing Seconds encountered by a SONET/SDH Section for the day.
PER csOc3SectionDaySESs	1.3.6.1.4.1.3085.3.1.3.3.2.3.1.2	PerfCurrentCount	read-only	The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Section for the day.
csOc3SectionDayTable	1.3.6.1.4.1.3085.3.1.3.3.2.3		not-accessible	The SONET/SDH Section Day table.
NUM csOc3SectionIntervalCVs	1.3.6.1.4.1.3085.3.1.3.3.2.2.1.5	PerfIntervalCount	read-only	The counter associated with the number of Coding Violations encountered by a SONET/SDH Section in a particular 15-minute interval in the past 24 hours.
csOc3SectionIntervalEntry	1.3.6.1.4.1.3085.3.1.3.3.2.2.1		not-accessible	An entry in the SONET/SDH Section Interval table.
NUM csOc3SectionIntervalESs	1.3.6.1.4.1.3085.3.1.3.3.2.2.1.2	PerfIntervalCount	read-only	The counter associated with the number of Errored Seconds encountered by a SONET/SDH Section in a particular 15-minute interval in the past 24 hours.
I32 csOc3SectionIntervalNumber	1.3.6.1.4.1.3085.3.1.3.3.2.2.1.1	Integer32	not-accessible	A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1.
NUM csOc3SectionIntervalSEFSs	1.3.6.1.4.1.3085.3.1.3.3.2.2.1.4	PerfIntervalCount	read-only	The counter associated with the number of Severely Errored Framing Seconds encountered by a SONET/SDH Section in a particular 15-minute interval in the past 24 hours.
NUM csOc3SectionIntervalSESs	1.3.6.1.4.1.3085.3.1.3.3.2.2.1.3	PerfIntervalCount	read-only	The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Section in a particular 15-minute interval in the past 24 hours.
csOc3SectionIntervalTable	1.3.6.1.4.1.3085.3.1.3.3.2.2		not-accessible	The SONET/SDH Section Interval table.
T/F csOc3SectionIntervalValidData	1.3.6.1.4.1.3085.3.1.3.3.2.2.1.6	TruthValue	read-only	This variable indicates if the data for this interval is valid.
INT csOc3SectionJ0	1.3.6.1.4.1.3085.3.1.3.3.1.1.1.6	INTEGER	read-write	This object identifies the section trace byte (j0) used on this OC3 port. If this object is set to hex01(1), the value sent within the j0 (section trace byte) element of the frame header is 0x01. This value should be set for interoperability with some SDH devices in Japan. If this object is set to hexCC(2), the value of the j0 element is 0xcc. This is the default value and should be used in the majority of cases.
PER csOc3SectionPrevDayCVs	1.3.6.1.4.1.3085.3.1.3.3.2.4.1.4	PerfCurrentCount	read-only	The counter associated with the number of Coding Violations encountered by a SONET/SDH Section for the previous day.
csOc3SectionPrevDayEntry	1.3.6.1.4.1.3085.3.1.3.3.2.4.1		not-accessible	An entry in the SONET/SDH Section Day table.
PER csOc3SectionPrevDayESs	1.3.6.1.4.1.3085.3.1.3.3.2.4.1.1	PerfCurrentCount	read-only	The counter associated with the number of Errored Seconds encountered by a SONET/SDH Section for the previous day.
PER csOc3SectionPrevDaySEFSs	1.3.6.1.4.1.3085.3.1.3.3.2.4.1.3	PerfCurrentCount	read-only	The counter associated with the number of Severely Errored Framing Seconds encountered by a SONET/SDH Section for the previous day.
PER csOc3SectionPrevDaySESs	1.3.6.1.4.1.3085.3.1.3.3.2.4.1.2	PerfCurrentCount	read-only	The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Section for the previous day.
csOc3SectionPrevDayTable	1.3.6.1.4.1.3085.3.1.3.3.2.4		not-accessible	The SONET/SDH Section Previous Day table.
I32 csOc3SlotIndex	1.3.6.1.4.1.3085.3.1.3.3.1.1.1.1	Integer32	not-accessible	This object identifies the blade to which this OC3 Port is attached. Together with csOc3ModuleIndex, csOc3PortIndex, it uniquely identifies a physical port.
I32 csOc3TimeElapsed	1.3.6.1.4.1.3085.3.1.3.3.1.1.1.21	Integer32	read-only	The number of seconds that have elapsed since the beginning of the current measurement period.
I32 csOc3ValidIntervals	1.3.6.1.4.1.3085.3.1.3.3.1.1.1.22	Integer32	read-only	This object indicates the number of previous 15-minute intervals for which data was collected.
INT csOcNSpeed	1.3.6.1.4.1.3085.3.1.3.3.1.1.1.30	INTEGER	read-only	The speed of OCn interface.
csOrionAAAServerConfigEntry	1.3.6.1.4.1.3085.3.1.6.21.1.1		not-accessible	Each entry represents the configuration parameters for a single AAA server in this VR.
csOrionAAAServerConfigTable	1.3.6.1.4.1.3085.3.1.6.21.1		not-accessible	This table contains AAA server configuration parameters.
I32 csOrionAAAServerConfigTableEnd	1.3.6.1.4.1.3085.3.1.6.21.2	Integer32	read-only	End of this group. value undefined
IP csOrionAAAServerIpAddress	1.3.6.1.4.1.3085.3.1.6.21.1.1.3	IpAddress	read-create	IP Address for this server.
STR csOrionAAAServerLdapPassword	1.3.6.1.4.1.3085.3.1.6.21.1.1.9	DisplayString	read-create	Password of the LDAP user. Applicable only if the server is of ldap type.
STR csOrionAAAServerLdapSearchBase	1.3.6.1.4.1.3085.3.1.6.21.1.1.10	DisplayString	read-create	Starting point in the directory hierarchy to perform search operations. Applicable only if the server is of ldap type.
STR csOrionAAAServerLdapSearchFilter	1.3.6.1.4.1.3085.3.1.6.21.1.1.11	DisplayString	read-create	A filter that defines the conditions that must be fulfilled in order for the search to match a given entry. This must conform to RFC 2254 LDAP Search Filter String Representation. Applicable only if the server is of ldap type.
STR csOrionAAAServerLdapUsername	1.3.6.1.4.1.3085.3.1.6.21.1.1.8	DisplayString	read-create	Distinguished Name of the LDAP user. Applicable only if the server is of ldap type.
csOrionAAAServerListAdminEntry	1.3.6.1.4.1.3085.3.1.6.21.5.1		not-accessible	Each entry represents an AAA server list.
INT csOrionAAAServerListAdminRowStatus	1.3.6.1.4.1.3085.3.1.6.21.5.1.1	INTEGER	read-write	Setting this object to destroy(6) will destroy the whole AAA service list with {type, name} specified in {csOrionAAAServerListConfigType, csOrionAAAServerListConfigName}.
csOrionAAAServerListAdminTable	1.3.6.1.4.1.3085.3.1.6.21.5		not-accessible	This table contains a RowStatus object to destroy an AAA server list defined in csOrionAAAServerListConfigTable. This provides a quick way to destroy the list without having to destroy each csOrionAAAServerListConfigEntry.
csOrionAAAServerListConfigEntry	1.3.6.1.4.1.3085.3.1.6.21.3.1		not-accessible	Each entry points to a single AAA server as defined in csOrionAAAServerConfigTable. This server has a unique priority within the list.
csOrionAAAServerListConfigTable	1.3.6.1.4.1.3085.3.1.6.21.3		not-accessible	This table contains AAA server list configuration parameters. An AAA server list is a prioritized collection of AAA servers as defined in csOrionAAAServerConfigTable.
I32 csOrionAAAServerListConfigTableEnd	1.3.6.1.4.1.3085.3.1.6.21.4	Integer32	read-only	End of this group. value undefined
STR csOrionAAAServerListName	1.3.6.1.4.1.3085.3.1.6.21.3.1.2	DisplayString	not-accessible	The name given to the collection of AAA servers. An application refers to this name when specifying which group of servers to use for AAA purposes. This object has to be set during creation.
I32 csOrionAAAServerListPriority	1.3.6.1.4.1.3085.3.1.6.21.3.1.3	Integer32	not-accessible	The relative priority of the server in this list. Lower number means higher priority.
INT csOrionAAAServerListRowStatus	1.3.6.1.4.1.3085.3.1.6.21.3.1.6	INTEGER	read-create	Used to create a row (createAndGo) or destroy a row. When setting this object to createAndGo, csOrionAAAServerListSvrName must also be set. Once the row is created, get on this object will always yield active(1).
STR csOrionAAAServerListSvrName	1.3.6.1.4.1.3085.3.1.6.21.3.1.4	DisplayString	read-create	The name of the AAA server as defined in csOrionAAAServerConfigTable. A value of 'local' for this object means that the authentication is done locally.
INT csOrionAAAServerListSvrType	1.3.6.1.4.1.3085.3.1.6.21.3.1.5	INTEGER	read-only	The type of AAA server. undefined(-1) means the corresponding AAA server is not yet defined, i.e., no entry in csOrionAAAServerConfigTable with a name as defined in csOrionAAAServerListSvrName. local(3) means that authentication is to be done locally.
INT csOrionAAAServerListType	1.3.6.1.4.1.3085.3.1.6.21.3.1.1	INTEGER	not-accessible	This object defines the kind of AAA servers that are contained in this list. If this object has a value of authentication(1), then all servers in this list are to be used for authentication purposes. If the server is of radius type, then it is also used for authorization. If this object has a value of authorization(2), then all servers in this list are to be used for authorization purposes. Note that only ldap servers can be added to this list. If this object has a value of accounting(4), then all servers in this list are to be used for accounting purposes. Note that only radius servers can be added to this list.
STR csOrionAAAServerName	1.3.6.1.4.1.3085.3.1.6.21.1.1.2	DisplayString	not-accessible	Name given for this AAA server. Name has to be unique regardless of csOrionAAAServerType.
I32 csOrionAAAServerPort	1.3.6.1.4.1.3085.3.1.6.21.1.1.4	Integer32	read-create	Port on which this AAA server is listening for messages. Radius client uses the default port 1812 for AA requests. Ldap client uses the default port 389 for AA requests. For rows where csAAAServerType is local, this object has no meaning.
OCT csOrionAAAServerRadiusKey	1.3.6.1.4.1.3085.3.1.6.21.1.1.7	OCTET STRING	read-create	The authentication and encryption key shared between the Radius client and this Radius Server. Applicable only if the server is of radius type.
I32 csOrionAAAServerRetransmit	1.3.6.1.4.1.3085.3.1.6.21.1.1.5	Integer32	read-create	The number of times a AAA Server will be queried before moving to the next AAA Server in the list identified by csOrionAAAServerList. This object cannot be set for LDAP server, which is subject to TCP retransmission constraint and cannot be modified. TCP retries 12 times; the first timeout is 1.5 seconds, the subsequent retry timeout is twice as the previous one but no more than 64 seconds.
INT csOrionAAAServerRowStatus	1.3.6.1.4.1.3085.3.1.6.21.1.1.12	INTEGER	read-create	Used to create a row (createAndGo) or destroy a row. Once the row is created, get on this object will always yield active(1).
I32 csOrionAAAServerTimeout	1.3.6.1.4.1.3085.3.1.6.21.1.1.6	Integer32	read-create	The amount of time (in seconds) to wait for a response from this AAA Server before timing out. This object cannot be set for LDAP server, which is subject to TCP timeout constraint and cannot be modified. TCP retries 12 times; the first timeout is 1.5 seconds, the subsequent retry timeout is twice as the previous one but no more than 64 seconds.
INT csOrionAAAServerType	1.3.6.1.4.1.3085.3.1.6.21.1.1.1	INTEGER	not-accessible	The type of AAA server.
csOrionAAAServiceInfo	1.3.6.1.4.1.3085.3.1.6.21
I32 csOrionAAAServiceInfoEnd	1.3.6.1.4.1.3085.3.1.6.21.6	Integer32	read-only	End of this group. value undefined
IP csOrionAccessListEndAddress	1.3.6.1.4.1.3085.3.1.6.1.1.1.3	IpAddress	read-create
csOrionAccessListEntry	1.3.6.1.4.1.3085.3.1.6.1.1.1		not-accessible	An entry containing filtering information used to classify packets.
I32 csOrionAccessListId	1.3.6.1.4.1.3085.3.1.6.1.1.1.1	Integer32	not-accessible	An identifier for this Access List Entry.
csOrionAccessListInfo	1.3.6.1.4.1.3085.3.1.6.1
I32 csOrionAccessListInfoEnd	1.3.6.1.4.1.3085.3.1.6.1.7	Integer32	read-only	End of this group. value undefined
I32 csOrionAccessListPoolId	1.3.6.1.4.1.3085.3.1.6.1.1.1.4	Integer32	read-create	The NAT Pool that is used when NAT is performed on packets matching this access list.
IP csOrionAccessListStartAddress	1.3.6.1.4.1.3085.3.1.6.1.1.1.2	IpAddress	read-create
ROW csOrionAccessListStatus	1.3.6.1.4.1.3085.3.1.6.1.1.1.5	RowStatus	read-create	This object is used to create/delete entries in this table.
csOrionAccessListTable	1.3.6.1.4.1.3085.3.1.6.1.1		not-accessible	A list of Access List Entries.
csOrionAcctInfo	1.3.6.1.4.1.3085.3.1.10
csOrionAddressListEntry	1.3.6.1.4.1.3085.3.1.6.1.4.1		not-accessible	Each entry contains information about a single address
IP csOrionAddressListIpAddress	1.3.6.1.4.1.3085.3.1.6.1.4.1.2	IpAddress	not-accessible	The IP address for this entry.
IP csOrionAddressListMask	1.3.6.1.4.1.3085.3.1.6.1.4.1.3	IpAddress	not-accessible	The mask for this entry.
STR csOrionAddressListName	1.3.6.1.4.1.3085.3.1.6.1.4.1.1	DisplayString	not-accessible	The name of the address-list. A name shall only contain alphanumeric characters and hyphens.
ROW csOrionAddressListRowStatus	1.3.6.1.4.1.3085.3.1.6.1.4.1.4	RowStatus	read-create	The RowStatus object for this table. This is used to add/delete rows from this table.
csOrionAddressListTable	1.3.6.1.4.1.3085.3.1.6.1.4		not-accessible	This table stores named lists of IP addresses. An address is specified as an IP address and mask. Each table entry constitutes a single address.
I32 csOrionAddressListTableEnd	1.3.6.1.4.1.3085.3.1.6.1.5	Integer32	read-only	End of this group. value undefined
INT csOrionAirFlowCardEventTrapGeneration	1.3.6.1.4.1.3085.3.1.7.7.1.1.9	INTEGER	read-write	The air flow card's trap/event generation status.
STR csOrionAirFlowCardFWMajorRevision	1.3.6.1.4.1.3085.3.1.7.7.1.1.3	DisplayString	read-only	The air flow card's firmwar major Revision information.
STR csOrionAirFlowCardFWMinorRevision	1.3.6.1.4.1.3085.3.1.7.7.1.1.4	DisplayString	read-only	The air flow card's firmware minor Revision information.
STR csOrionAirFlowCardFWRelease	1.3.6.1.4.1.3085.3.1.7.7.1.1.5	DisplayString	read-only	The air flow card's firmware release information.
STR csOrionAirFlowCardFWReleaseDate	1.3.6.1.4.1.3085.3.1.7.7.1.1.6	DisplayString	read-only	A textual string containing information about the date of the firmwre release.
STR csOrionAirFlowCardHWRevision	1.3.6.1.4.1.3085.3.1.7.7.1.1.2	DisplayString	read-only	The air flow card's hardward Revision information.
INT csOrionAirFlowCardIndex	1.3.6.1.4.1.3085.3.1.7.7.1.1.1	INTEGER	not-accessible	Identifies the temperature air flow card.
I32 csOrionAirFlowCardTemperature	1.3.6.1.4.1.3085.3.1.7.7.1.1.7	Integer32	read-only	The air flow card's temperature.
INT csOrionAirFlowCardTempState	1.3.6.1.4.1.3085.3.1.7.7.1.1.8	INTEGER	read-only	An inlet air flow temperature sensor operational state.
INT csOrionAlarmAffectType	1.3.6.1.4.1.3085.3.1.4.3.16	INTEGER	read-only	Indicates that it is a not service affecting alarm or a service affecting alarm.
NTF csOrionAlarmClear	1.3.6.1.4.1.3085.3.1.1.1.42			A csOrionAlarmClear trap signifies that a physical port on a blade, which had sent an alarm earlier, indicates that the previous alarm is cleared. Applicable to DS3.
INT csOrionAlarmSeverityType	1.3.6.1.4.1.3085.3.1.4.3.17	INTEGER	read-only	Indicates the severity of this alarm.
INT csOrionAlarmType	1.3.6.1.4.1.3085.3.1.4.3.14	INTEGER	read-only	For port level alarms related DS3 traps, this identifies the alarm which is cleared now.
csOrionBackplaneInfo	1.3.6.1.4.1.3085.3.1.8
G32 csOrionBackplaneUtilization	1.3.6.1.4.1.3085.3.1.8.1	Gauge32	read-only	A % of utilization for backplane.
csOrionBgp	1.3.6.1.4.1.3085.3.1.4.2.8
I32 csOrionBgpEnd	1.3.6.1.4.1.3085.3.1.4.2.8.3	Integer32	read-only	End of this group. value undefined
NTF csOrionBgpMaxPfxLimit	1.3.6.1.4.1.3085.3.1.1.1.51			This trap reports that max-prefix limit has been reached for the given neighbor
INT csOrionBgpMaxPfxLimitEvent	1.3.6.1.4.1.3085.3.1.13.21	INTEGER	accessible-for-notify	Indicates the following events: maximum prefix limit reached exceeds maximum prefix exceeds maximum prefix limit - idling neighbor exceeds maximum prefix limit - discarding additional routes maximum prefix limit threshold reached.
NTF csOrionBgpNbrMaxPfxLimit	1.3.6.1.4.1.3085.3.1.1.1.52			This trap reports that max-prefix limit has been reached for the given neighbor
STR csOrionBladeCLEICode	1.3.6.1.4.1.3085.3.1.5.1.1.14	DisplayString	read-only	A textual string containing information about the CLEI of the blade.
OCT csOrionBladeConfigAttributes	1.3.6.1.4.1.3085.3.1.5.1.1.11	OCTET STRING	read-only	Contains the configured or static parameters of this blade. Each parameter is represented by a type-lenth-value data structure. A single TLV may contain individual TLVs. The types IDs currently supported are : 1 - Description (string) [sample only] more parameters will be added. NOTE: This object is deprecated and is replaced by individual objects starting from csOrionBladeModelNumb.
STR csOrionBladeDescr	1.3.6.1.4.1.3085.3.1.5.1.1.2	DisplayString	read-only	A textual string containing information about the blade. This string should include the name of the manufacturer and the product name.
I32 csOrionBladeEnginesNumb	1.3.6.1.4.1.3085.3.1.5.1.1.5	Integer32	read-only	The number of engines on the blade. NOTE: This object is not used.
csOrionBladeEntry	1.3.6.1.4.1.3085.3.1.5.1.1		not-accessible	An entry containing management information applicable to a particular Blade.
STR csOrionBladeFPGAVersion	1.3.6.1.4.1.3085.3.1.5.1.1.15	DisplayString	read-only	A textual string containing information about the FPGA version of the blade.
STR csOrionBladeHwVer	1.3.6.1.4.1.3085.3.1.5.1.1.8	DisplayString	read-only	A textual string containing information about the hardware revision version. NOTE: This object is not used.
csOrionBladeInfo	1.3.6.1.4.1.3085.3.1.5
I32 csOrionBladeInfoEnd	1.3.6.1.4.1.3085.3.1.5.4	Integer32	read-only	End of this group. value undefined
NTF csOrionBladeInserted	1.3.6.1.4.1.3085.3.1.1.1.2			A csOrionBladeInserted trap signifies that SNMPv2 entity, acting in an agent role, has detected that the one of the Blade was inserted in the empty slot.
STR csOrionBladeIPSXLoaderDate	1.3.6.1.4.1.3085.3.1.5.1.1.22	DisplayString	read-only	A textual string containing information about the date of the loader. NOTE: This object is not used.
STR csOrionBladeIPSXLoaderProduct	1.3.6.1.4.1.3085.3.1.5.1.1.20	DisplayString	read-only	A textual string containing information about the IPSX loader.
STR csOrionBladeIPSXLoaderTime	1.3.6.1.4.1.3085.3.1.5.1.1.23	DisplayString	read-only	A textual string containing information about the time of the loader.
STR csOrionBladeIPSXLoaderVersion	1.3.6.1.4.1.3085.3.1.5.1.1.21	DisplayString	read-only	A textual string containing information about the version of the loader NOTE: This object is not used.
STR csOrionBladeModelNumb	1.3.6.1.4.1.3085.3.1.5.1.1.13	DisplayString	read-only	A textual string containing information about the model number of the blade.
I32 csOrionBladeNumSharcCrypto	1.3.6.1.4.1.3085.3.1.5.1.1.29	Integer32	read-only	Number of crypto modules present on the sharc blade
OCT csOrionBladeOperAttributes	1.3.6.1.4.1.3085.3.1.5.1.1.12	OCTET STRING	read-only	Contains the operational or dynamic parameters of this blade. Each parameter is represented by a type-lenth-value data structure. A single TLV may contain individual TLVs. The types IDs currently supported are : 1 - Description (string) [sample only] more parameters will be added. NOTE: This object is deprecated and is replaced by individual objects starting from csOrionBladeTemperatureSensor1.
MAC csOrionBladePort1MacAddr	1.3.6.1.4.1.3085.3.1.5.1.1.16	MacAddress	read-only	MAC Address of ethernet port 1 on the blade. Applies only to control or ethernet blade.
MAC csOrionBladePort2MacAddr	1.3.6.1.4.1.3085.3.1.5.1.1.17	MacAddress	read-only	MAC Address of ethernet port 2 on the blade. Applies only to control or ethernet blade.
MAC csOrionBladePort3MacAddr	1.3.6.1.4.1.3085.3.1.5.1.1.18	MacAddress	read-only	MAC Address of ethernet port 3 on the blade. Applies only to control or ethernet blade.
MAC csOrionBladePort4MacAddr	1.3.6.1.4.1.3085.3.1.5.1.1.19	MacAddress	read-only	MAC Address of ethernet port 4 on the blade. Applies only to control or ethernet blade.
I32 csOrionBladePortNumb	1.3.6.1.4.1.3085.3.1.5.1.1.6	Integer32	read-only	The number of ports on this blade (note, process blades have no ports).
NTF csOrionBladeRemoved	1.3.6.1.4.1.3085.3.1.1.1.1			A orionBladeRemoved trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the one of the existing Blade was removed from it's slot.
INT csOrionBladeReset	1.3.6.1.4.1.3085.3.1.5.1.1.10	INTEGER	read-write	The software reset for this blade. It is an action object such that when set to 'reset' will reset this blade. Setting it to 'none' has no effect, and when it is retrieved the value will always be 'none'.
NTF csOrionBladeRestore	1.3.6.1.4.1.3085.3.1.1.1.40			A csOrionBladeRestore trap signifies that a blade had been restored successfully or not. The VarBind that follow contains the list of VPN/VRs affected.
STR csOrionBladeSerialNumb	1.3.6.1.4.1.3085.3.1.5.1.1.7	DisplayString	read-only	The serial number of the blade. This is a series of alphanumeric characters which uniquely identifies this blade. NOTE: This object is not used.
STR csOrionBladeSharcCryptoAssembly1	1.3.6.1.4.1.3085.3.1.5.1.1.36	DisplayString	read-only	The assembly number of the first sharc crypto module
STR csOrionBladeSharcCryptoAssembly2	1.3.6.1.4.1.3085.3.1.5.1.1.37	DisplayString	read-only	The assembly number of the second sharc crypto module
I32 csOrionBladeSharcCryptoModuleId1	1.3.6.1.4.1.3085.3.1.5.1.1.30	Integer32	read-only	Blade port in which the first crypto is present (Note, -1 indicates that there are no crypto modules in the blade)
I32 csOrionBladeSharcCryptoModuleId2	1.3.6.1.4.1.3085.3.1.5.1.1.31	Integer32	read-only	Blade port in which the first crypto is present (Note, -1 indicates that there are one or less crypto modules in the blade)
STR csOrionBladeSharcCryptoSerial1	1.3.6.1.4.1.3085.3.1.5.1.1.34	DisplayString	read-only	The serial number of the first sharc crypto module - series of alphanumeric characters which uniquely identifies the crypto module on this blade.
STR csOrionBladeSharcCryptoSerial2	1.3.6.1.4.1.3085.3.1.5.1.1.35	DisplayString	read-only	The serial number of the second sharc crypto module - series of alphanumeric characters which uniquely identifies the crypto module on this blade.
INT csOrionBladeSharcCryptoType1	1.3.6.1.4.1.3085.3.1.5.1.1.32	INTEGER	read-only	Type of the first sharc crypto module present
INT csOrionBladeSharcCryptoType2	1.3.6.1.4.1.3085.3.1.5.1.1.33	INTEGER	read-only	Type of the second sharc crypto module present
INT csOrionBladeShutdown	1.3.6.1.4.1.3085.3.1.5.1.1.28	INTEGER	read-write	The software shutdown for this blade. It is an action object such that when set to 'shutdown' will stop the file-system on this blade. Setting it to 'none' has no effect, and when it is retrieved the value will always be 'none'.
I32 csOrionBladeSlotLocation	1.3.6.1.4.1.3085.3.1.5.1.1.1	Integer32	read-only	Slot Location of the Blade in the Orion box.
INT csOrionBladeState	1.3.6.1.4.1.3085.3.1.5.1.1.4	INTEGER	read-only	The current state of this blade.
NTF csOrionBladeStateChange	1.3.6.1.4.1.3085.3.1.1.1.3			A csOrionBladeStateChange signifies that the SNMPv2 entity acting in an agent role, has detected that a Blade has changed states. A description of the Blade as well as the entered state is identified in this trap.
STR csOrionBladeSwVer	1.3.6.1.4.1.3085.3.1.5.1.1.9	DisplayString	read-only	A textual string containing information about the software revision version. NOTE: This object is not used.
csOrionBladeTable	1.3.6.1.4.1.3085.3.1.5.1		not-accessible	A list of Blades which belongs to Orion box.
STR csOrionBladeTemperatureSensor1	1.3.6.1.4.1.3085.3.1.5.1.1.24	DisplayString	read-only	A textual string containing information about the temperature of sensor 1.
STR csOrionBladeTemperatureSensor2	1.3.6.1.4.1.3085.3.1.5.1.1.25	DisplayString	read-only	A textual string containing information about the temperature of sensor 2.
STR csOrionBladeTemperatureSensor3	1.3.6.1.4.1.3085.3.1.5.1.1.26	DisplayString	read-only	A textual string containing information about the temperature of sensor 3.
STR csOrionBladeTemperatureSensor4	1.3.6.1.4.1.3085.3.1.5.1.1.27	DisplayString	read-only	A textual string containing information about the temperature of sensor 4.
INT csOrionBladeType	1.3.6.1.4.1.3085.3.1.5.1.1.3	INTEGER	read-only	The type of blade inserted in this slot.
csOrionBoot	1.3.6.1.4.1.3085.3.1.2.2
NTF csOrionCBRFileError	1.3.6.1.4.1.3085.3.1.1.1.50			This trap reports on the status of the copy operation of a system file from master to standby control blade. Generated only if there is control blade redundancy (cbr).
INT csOrionChangeSource	1.3.6.1.4.1.3085.3.1.4.3.2	INTEGER	read-only	The source of the configuration change (illegal).
STR csOrionChangeSourceUserName	1.3.6.1.4.1.3085.3.1.4.3.3	DisplayString	read-only	A textual string containing information about the user name of the source configuration change.
OID csOrionChangeTableOID	1.3.6.1.4.1.3085.3.1.4.3.1	OBJECT IDENTIFIER	read-only	Object identifier of the Table, which was changed.
csOrionChassisInfo	1.3.6.1.4.1.3085.3.1.2.7
OCT csOrionChassisMidplaneID	1.3.6.1.4.1.3085.3.1.2.7.1	OCTET STRING	read-only	Midplane laser ID for this chassis.
I32 csOrionChassisPacketRingPrimaryCRC	1.3.6.1.4.1.3085.3.1.2.7.6	Integer32	read-only	CRC count on the primary packet ring.
I32 csOrionChassisPacketRingPrimToProtEndpoint	1.3.6.1.4.1.3085.3.1.2.7.4	Integer32	read-only	Slot number of the primary to protection endpoint. If csOrionChassisPacketRingStatus is noProtection, this object will have a value of 0.
I32 csOrionChassisPacketRingProtectionCRC	1.3.6.1.4.1.3085.3.1.2.7.7	Integer32	read-only	CRC count on the protection packet ring.
I32 csOrionChassisPacketRingProtToPrimEndpoint	1.3.6.1.4.1.3085.3.1.2.7.5	Integer32	read-only	Slot number of the protection to primary endpoint. If csOrionChassisPacketRingStatus is noProtection, this object will have a value of 0.
INT csOrionChassisPacketRingStatus	1.3.6.1.4.1.3085.3.1.2.7.3	INTEGER	read-only	Status of the packet ring. noProtection means protection ring is inactive. onProtection means protection ring is active.
INT csOrionChassisType	1.3.6.1.4.1.3085.3.1.2.7.2	INTEGER	read-only	Chassis type.
INT csOrionCiscoHdlcAdminStatus	1.3.6.1.4.1.3085.3.1.6.11.1.1.7	INTEGER	read-write	This object is used to enable/disable the Cisco HDLC.
I32 csOrionCiscoHdlcChIndex	1.3.6.1.4.1.3085.3.1.6.11.1.1.4	Integer32	not-accessible	The Channel Id of this interface. Channel is 0 if this object is in the Unchannelized DS3.
csOrionCiscoHdlcConfigEntry	1.3.6.1.4.1.3085.3.1.6.11.1.1		not-accessible	Each entry represents the Cisco HDLC interface-specific configuration parameters for a single interface.
csOrionCiscoHdlcConfigTable	1.3.6.1.4.1.3085.3.1.6.11.1		not-accessible	This table contains configuration parameters for Cisco HDLC.
csOrionCiscoHdlcInfo	1.3.6.1.4.1.3085.3.1.6.11
I32 csOrionCiscoHdlcInfoEnd	1.3.6.1.4.1.3085.3.1.6.11.2	Integer32	read-only	End of this group. value undefined
I32 csOrionCiscoHdlcModuleIndex	1.3.6.1.4.1.3085.3.1.6.11.1.1.2	Integer32	not-accessible	The Module Id of this interface.
OPE csOrionCiscoHdlcOperStatus	1.3.6.1.4.1.3085.3.1.6.11.1.1.6	OperStatus	read-only	The operational status of this table.
I32 csOrionCiscoHdlcPortIndex	1.3.6.1.4.1.3085.3.1.6.11.1.1.3	Integer32	not-accessible	The Port Id of this interface.
I32 csOrionCiscoHdlcSlarpKeepAlive	1.3.6.1.4.1.3085.3.1.6.11.1.1.5	Integer32	read-write	The interval, in second, between keep alive packets.
I32 csOrionCiscoHdlcSlotIndex	1.3.6.1.4.1.3085.3.1.6.11.1.1.1	Integer32	not-accessible	The Slot Id of this interface.
csOrionConfig	1.3.6.1.4.1.3085.3.1.2.5
NTF csOrionConfigChange	1.3.6.1.4.1.3085.3.1.1.1.5			A csOrionConfigChange trap signifies that the SNMPv2 entity, acting in an agent role, has detected that Configuration was changed. The Trap PDU for this csOrionConfigChange, also carries each of the modified object's OID followed by the changed value. In effect, there are one or more VarBinds follows the csOrionNumConfigChanges object of the Trap PDU. Since these OIDs are the member of one of the table defined in this MIB, type information of the value shall be got from the OID. If the csOrionConfigChangeType is delete, the VarBind that follows the csOrionNumConfigChanges contains the Index(es) of the entry which was deleted. If the csOrionConfigChangeType is addModify, then the VarBind contains all the changed OID-Value pairs followed by the index(es).
INT csOrionConfigChangeType	1.3.6.1.4.1.3085.3.1.4.3.9	INTEGER	read-only	For ConfigChange Traps, this identifies the type of change that was made on a table. For scalar objects, this always has the value 1.
csOrionConfigLoad	1.3.6.1.4.1.3085.3.1.2.5.2
INT csOrionConfigLoadOutputEnable	1.3.6.1.4.1.3085.3.1.2.5.2.1	INTEGER	read-write	This object controls whether output from loading configuration file should be printed out to the console. Loading configuration will be quicker if this object is disabled.
csOrionConfigSave	1.3.6.1.4.1.3085.3.1.2.5.1
STR csOrionConfigSaveFileName	1.3.6.1.4.1.3085.3.1.2.5.1.1	DisplayString	read-write	This object is used when the save configuration is launched on an Orion box by setting the csOrionConfigSave object. The device handle the default value for this object. When this object is not set, the device look for the csOrionSystemBootConfig of the csOrionSystemBootTable. If that is not NULL, that name is used as the file name. Otherwise the default filename of config.dat is used.
INT csOrionConfigSaveStart	1.3.6.1.4.1.3085.3.1.2.5.1.2	INTEGER	read-write	This object triggers the configuration saving on the divice. The result of this action is stored in csOrionConfigSaveStatus.
INT csOrionConfigSaveStatus	1.3.6.1.4.1.3085.3.1.2.5.1.3	INTEGER	read-only	This object triggers the configuration saving on the divice. The result of this action is stored in csOrionConfigSaveStatus.
STR csOrionConnectionProfileAddrPoolname	1.3.6.1.4.1.3085.3.1.6.18.2.1.4	LongDisplayString	read-create	The local IP address poolname in the VR.
csOrionConnectionProfileEntry	1.3.6.1.4.1.3085.3.1.6.18.2.1		not-accessible	This entry represents a single connection profile.
IP csOrionConnectionProfileLnsAddress	1.3.6.1.4.1.3085.3.1.6.18.2.1.5	IpAddress	read-create	The LNS IP address this profile applies to.
STR csOrionConnectionProfileName	1.3.6.1.4.1.3085.3.1.6.18.2.1.1	LongDisplayString	not-accessible	The name of this connection profile.
ROW csOrionConnectionProfileRowStatus	1.3.6.1.4.1.3085.3.1.6.18.2.1.6	RowStatus	read-create	The row status for this table.
csOrionConnectionProfileTable	1.3.6.1.4.1.3085.3.1.6.18.2		not-accessible	This table contains a list of connection profiles.
I32 csOrionConnectionProfileVpnId	1.3.6.1.4.1.3085.3.1.6.18.2.1.2	Integer32	read-create	The VPN Id this profile applies to.
IP csOrionConnectionProfileVrId	1.3.6.1.4.1.3085.3.1.6.18.2.1.3	IpAddress	read-create	The VR Id this profile applies to.
NTF csOrionControlVrDown	1.3.6.1.4.1.3085.3.1.1.1.33			A csOrionControlVrDown trap signifies that a Virtual Router which is designated as a control VR has gone down.
NTF csOrionControlVrUp	1.3.6.1.4.1.3085.3.1.1.1.32			A csOrionControlVrUp trap signifies that a Virtual Router which is designated as a control VR has come up. If a csOrionBladeRemoved Trap precedes this trap and if that blade is the master control blade then this trap might be from the control VR of the new master blade.
NTF csOrionCustomerVrDown	1.3.6.1.4.1.3085.3.1.1.1.29			A csOrionCustomerVrDown trap signifies that a Virtual Router which services a customer network has gone down.
NTF csOrionCustomerVrUp	1.3.6.1.4.1.3085.3.1.1.1.28			A csOrionCustomerVrUp trap signifies that a Virtual Router which services a customer network has has come up.
NTF csOrionDevicePresent	1.3.6.1.4.1.3085.3.1.1.1.47			This trap indicates that a given I2C device is present. This trap will occur on 9500 and 3500 chassis only.
csOrionDHCPInfo	1.3.6.1.4.1.3085.3.1.6.15
I32 csOrionDHCPInfoEnd	1.3.6.1.4.1.3085.3.1.6.15.2	Integer32	read-only	End of this group. value undefined
C32 csOrionDhcpRelayInAcks	1.3.6.1.4.1.3085.3.1.6.15.1.3.1.5	Counter32	read-only	The tatal number of DHCP Ack packets received.
C32 csOrionDhcpRelayInDecs	1.3.6.1.4.1.3085.3.1.6.15.1.3.1.4	Counter32	read-only	The total number of DHCP Decline packets received.
C32 csOrionDhcpRelayInDiscs	1.3.6.1.4.1.3085.3.1.6.15.1.3.1.2	Counter32	read-only	The total number of DHCP Discover packets received.
csOrionDHCPRelayInfo	1.3.6.1.4.1.3085.3.1.6.15.1
C32 csOrionDhcpRelayInNaks	1.3.6.1.4.1.3085.3.1.6.15.1.3.1.6	Counter32	read-only	The total number of DHCP Nak packets received.
C32 csOrionDhcpRelayInOffers	1.3.6.1.4.1.3085.3.1.6.15.1.3.1.7	Counter32	read-only	The total number of DHCP Offer packets received.
C32 csOrionDhcpRelayInRels	1.3.6.1.4.1.3085.3.1.6.15.1.3.1.3	Counter32	read-only	The total number of DHCP Release packets received.
C32 csOrionDhcpRelayInReqs	1.3.6.1.4.1.3085.3.1.6.15.1.3.1.1	Counter32	read-only	The total number of DHCP Request packets received.
C32 csOrionDhcpRelayOutAcks	1.3.6.1.4.1.3085.3.1.6.15.1.3.1.12	Counter32	read-only	The tatal number of DHCP Ack packets forwarded.
C32 csOrionDhcpRelayOutDecs	1.3.6.1.4.1.3085.3.1.6.15.1.3.1.11	Counter32	read-only	The total number of DHCP Decline packets forwarded.
C32 csOrionDhcpRelayOutDiscs	1.3.6.1.4.1.3085.3.1.6.15.1.3.1.9	Counter32	read-only	The total number of DHCP Discover packets forwarded.
C32 csOrionDhcpRelayOutNaks	1.3.6.1.4.1.3085.3.1.6.15.1.3.1.13	Counter32	read-only	The total number of DHCP Nak packets forwarded.
C32 csOrionDhcpRelayOutOffers	1.3.6.1.4.1.3085.3.1.6.15.1.3.1.14	Counter32	read-only	The total number of DHCP Offer packets forwarded.
C32 csOrionDhcpRelayOutRels	1.3.6.1.4.1.3085.3.1.6.15.1.3.1.10	Counter32	read-only	The total number of DHCP Release packets forwarded.
C32 csOrionDhcpRelayOutReqs	1.3.6.1.4.1.3085.3.1.6.15.1.3.1.8	Counter32	read-only	The total number of DHCP Request packets forwarded.
csOrionDhcpRelayStatsEntry	1.3.6.1.4.1.3085.3.1.6.15.1.3.1		not-accessible	A Set of statistics for a single DHCP Relay Agent.
csOrionDhcpRelayStatsTable	1.3.6.1.4.1.3085.3.1.6.15.1.3		not-accessible	This table contains various statistics pertaining to the DHCP Relay Agent.
csOrionDNSInfo	1.3.6.1.4.1.3085.3.1.6.10
I32 csOrionDNSInfoEnd	1.3.6.1.4.1.3085.3.1.6.10.2	Integer32	read-only	End of this group. value undefined
NTF csOrionDs3AlarmIndication	1.3.6.1.4.1.3085.3.1.1.1.38			A csOrionAlarmIndication trap signifies that a physical port on a blade generates an alarm (AIS) that indicates a failure in upstream far end.
csOrionDs3Info	1.3.6.1.4.1.3085.3.1.3.2
NTF csOrionDs3PortIdle	1.3.6.1.4.1.3085.3.1.1.1.41			A csOrionDs3PortIdle trap signifies that a physical port on a blade received an IDLE signal from the far end indicating it is unequipped to handle any data transfer.
csOrionDsByteFilterInfo	1.3.6.1.4.1.3085.3.1.6.14.1
I32 csOrionDsByteFilterInfoEnd	1.3.6.1.4.1.3085.3.1.6.14.1.3	Integer32	read-only	End of this group. value undefined
csOrionDynamicConn	1.3.6.1.4.1.3085.3.1.10.2
csOrionDynamicCryptoMapEntry	1.3.6.1.4.1.3085.3.1.6.5.2.1		not-accessible	Each entry contains a specific set of Dynamic Crypto Map for use by a Security Association.
I32 csOrionDynamicCryptoMapMatchAddress	1.3.6.1.4.1.3085.3.1.6.5.2.1.3	Integer32	read-create	Access List ID used by this Dynamic Crypto Map.
STR csOrionDynamicCryptoMapName	1.3.6.1.4.1.3085.3.1.6.5.2.1.1	DisplayString	not-accessible	An index for the Dynamic Crypto Map Table.
I32 csOrionDynamicCryptoMapNumber	1.3.6.1.4.1.3085.3.1.6.5.2.1.2	Integer32	not-accessible	An index for the Dynamic Crypto Map Table.
IP csOrionDynamicCryptoMapPeer	1.3.6.1.4.1.3085.3.1.6.5.2.1.4	IpAddress	read-create	Peer Address for this Dynamic Crypto Map.
INT csOrionDynamicCryptoMapPfs	1.3.6.1.4.1.3085.3.1.6.5.2.1.13	INTEGER	read-create	This object is used to request Perfect Forward Secrecy for this Dynamic Crypto Map.
I32 csOrionDynamicCryptoMapSessionKeyLifetimeBytes	1.3.6.1.4.1.3085.3.1.6.5.2.1.12	Integer32	read-create	A Session key lifetime in bytes used by this Dynamic Crypto Map.
I32 csOrionDynamicCryptoMapSessionKeyLifetimeSec	1.3.6.1.4.1.3085.3.1.6.5.2.1.11	Integer32	read-create	A Session key lifetime in seconds used by this Dynamic Crypto Map.
ROW csOrionDynamicCryptoMapStatus	1.3.6.1.4.1.3085.3.1.6.5.2.1.14	RowStatus	read-create	A row status type for the Dynamic Crypto Map.
csOrionDynamicCryptoMapTable	1.3.6.1.4.1.3085.3.1.6.5.2		not-accessible	A table for Dynamic Crypto Map.
STR csOrionDynamicCryptoMapTransformSet1	1.3.6.1.4.1.3085.3.1.6.5.2.1.5	DisplayString	read-create	A transform set used by this Dynamic Crypto Map.
STR csOrionDynamicCryptoMapTransformSet2	1.3.6.1.4.1.3085.3.1.6.5.2.1.6	DisplayString	read-create	A transform set used by this Dynamic Crypto Map.
STR csOrionDynamicCryptoMapTransformSet3	1.3.6.1.4.1.3085.3.1.6.5.2.1.7	DisplayString	read-create	A transform set used by this Dynamic Crypto Map.
STR csOrionDynamicCryptoMapTransformSet4	1.3.6.1.4.1.3085.3.1.6.5.2.1.8	DisplayString	read-create	A transform set used by this Dynamic Crypto Map.
STR csOrionDynamicCryptoMapTransformSet5	1.3.6.1.4.1.3085.3.1.6.5.2.1.9	DisplayString	read-create	A transform set used by this Dynamic Crypto Map.
STR csOrionDynamicCryptoMapTransformSet6	1.3.6.1.4.1.3085.3.1.6.5.2.1.10	DisplayString	read-create	A transform set used by this Dynamic Crypto Map.
csOrionEncryptInfo	1.3.6.1.4.1.3085.3.1.6.5
I32 csOrionEncryptInfoEnd	1.3.6.1.4.1.3085.3.1.6.5.15	Integer32	read-only	End of this group. value undefined
STR csOrionEngineApplicationDate	1.3.6.1.4.1.3085.3.1.5.2.1.18	DisplayString	read-only	A textual string containing information about the date of the application.
STR csOrionEngineApplicationProduct	1.3.6.1.4.1.3085.3.1.5.2.1.16	DisplayString	read-only	A textual string containing information about the application.
STR csOrionEngineApplicationTime	1.3.6.1.4.1.3085.3.1.5.2.1.19	DisplayString	read-only	A textual string containing information about the time of the application.
STR csOrionEngineApplicationVersion	1.3.6.1.4.1.3085.3.1.5.2.1.17	DisplayString	read-only	A textual string containing information about the version of the application.
STR csOrionEngineAssemblyNumb	1.3.6.1.4.1.3085.3.1.5.2.1.21	DisplayString	read-only	The assembly number of the engine.
OCT csOrionEngineConfigAttributes	1.3.6.1.4.1.3085.3.1.5.2.1.10	OCTET STRING	read-only	Contains the configured or static parameters of this engine. Each parameter is represented by a type-lenth-value data structure. A single TLV may contain individual TLVs. The types IDs currently supported are : 1 - Description (string) [sample only] more parameters will be added. NOTE: This object is deprecated and is replaced by individual objects starting from csOrionEngineLoaderProduct.
INT csOrionEngineCpuType	1.3.6.1.4.1.3085.3.1.5.2.1.22	INTEGER	read-only	The type of cpu for the engine.
I32 csOrionEngineCpuVersion	1.3.6.1.4.1.3085.3.1.5.2.1.23	Integer32	read-only	The CPU version of the engine.
G32 csOrionEngineDataCacheSize	1.3.6.1.4.1.3085.3.1.5.2.1.24	Gauge32	read-only	Data cache size of the engine.
STR csOrionEngineDescr	1.3.6.1.4.1.3085.3.1.5.2.1.6	DisplayString	read-only	A textual string containing information about the process engine manufacturer and the product name. NOTE: This object is not used.
csOrionEngineEntry	1.3.6.1.4.1.3085.3.1.5.2.1		not-accessible	An entry containing management information applicable to a particular process engine.
I32 csOrionEngineForwardingMode	1.3.6.1.4.1.3085.3.1.5.2.1.40	Integer32	read-write	Packet Forarding Mode for the Engine,HW Prefix,HW Flow,SW Passthrough
G32 csOrionEngineFreeMemory	1.3.6.1.4.1.3085.3.1.5.2.1.34	Gauge32	read-only	Free memory for the engine.
G32 csOrionEngineFreeMemoryLong	1.3.6.1.4.1.3085.3.1.5.2.1.37	Gauge32	read-only	Free memory, in 100 KByte unit, averaged over the last 10 minutes.
G32 csOrionEngineFreeMemoryMedium	1.3.6.1.4.1.3085.3.1.5.2.1.36	Gauge32	read-only	Free memory, in 100 KByte unit, averaged over the last 30 seconds.
I32 csOrionEngineIndex	1.3.6.1.4.1.3085.3.1.5.2.1.1	Integer32	not-accessible	A unique value for each engine.
G32 csOrionEngineInstructionCacheSize	1.3.6.1.4.1.3085.3.1.5.2.1.25	Gauge32	read-only	Instruction cache size of the engine.
G32 csOrionEngineLargestFreeMemory	1.3.6.1.4.1.3085.3.1.5.2.1.35	Gauge32	read-only	Size of the largest free memory block for the engine.
G32 csOrionEngineLevel3CacheSize	1.3.6.1.4.1.3085.3.1.5.2.1.27	Gauge32	read-only	Level 3 cache size of the engine.
STR csOrionEngineLoaderDate	1.3.6.1.4.1.3085.3.1.5.2.1.14	DisplayString	read-only	A textual string containing information about the date of the loader.
STR csOrionEngineLoaderProduct	1.3.6.1.4.1.3085.3.1.5.2.1.12	DisplayString	read-only	A textual string containing information about the engine loader.
STR csOrionEngineLoaderTime	1.3.6.1.4.1.3085.3.1.5.2.1.15	DisplayString	read-only	A textual string containing information about the time of the loader.
STR csOrionEngineLoaderVersion	1.3.6.1.4.1.3085.3.1.5.2.1.13	DisplayString	read-only	A textual string containing information about the version of the loader.
G32 csOrionEngineMemoryAllocFailures	1.3.6.1.4.1.3085.3.1.5.2.1.29	Gauge32	read-only	Memory allocation failures for the engine.
G32 csOrionEngineMemoryAllocs	1.3.6.1.4.1.3085.3.1.5.2.1.28	Gauge32	read-only	Memory allocated for the engine.
G32 csOrionEngineMemoryBadFrees	1.3.6.1.4.1.3085.3.1.5.2.1.31	Gauge32	read-only	Memory free failures for the engine.
G32 csOrionEngineMemoryBytesAllocs	1.3.6.1.4.1.3085.3.1.5.2.1.32	Gauge32	read-only	Bytes allocated for the engine.
G32 csOrionEngineMemoryBytesFreed	1.3.6.1.4.1.3085.3.1.5.2.1.33	Gauge32	read-only	Bytes freed for the engine.
G32 csOrionEngineMemoryFrees	1.3.6.1.4.1.3085.3.1.5.2.1.30	Gauge32	read-only	Memory freed for the engine.
I32 csOrionEngineMemorySize	1.3.6.1.4.1.3085.3.1.5.2.1.2	Integer32	read-only	The size of the memory for the specified Engine, in bytes. NOTE: This object is not used.
I32 csOrionEngineMemoryUtil	1.3.6.1.4.1.3085.3.1.5.2.1.3	Integer32	read-only	The current percentage utilization of the memory for the specified Engine.
OCT csOrionEngineOperAttributes	1.3.6.1.4.1.3085.3.1.5.2.1.11	OCTET STRING	read-only	Contains the operational or dynamic parameters of this engine. Each parameter is represented by a type-lenth-value data structure. A single TLV may contain individual TLVs. The types IDs currently supported are : 1 - Description (string) [sample only] more parameters will be added. NOTE: This object is deprecated and is replaced by individual objects starting from csOrionEngineMemoryAllocs.
I32 csOrionEngineOsVersion	1.3.6.1.4.1.3085.3.1.5.2.1.41	Integer32	read-only	The OS version of the engine/module.
G32 csOrionEngineSecondaryCacheSize	1.3.6.1.4.1.3085.3.1.5.2.1.26	Gauge32	read-only	Secondary cache size of the engine.
STR csOrionEngineSerialNumb	1.3.6.1.4.1.3085.3.1.5.2.1.20	DisplayString	read-only	The serial number of the engine. This is a series of alphanumeric characters which uniquely identifies the engine on this blade.
INT csOrionEngineState	1.3.6.1.4.1.3085.3.1.5.2.1.9	INTEGER	read-only	The current state of this engine.
csOrionEngineTable	1.3.6.1.4.1.3085.3.1.5.2		not-accessible	A list of Process Engines such as CPU, Search Engine and Encryption Engine which exist in the Orion box. This table is used as csOrionModuleTable. Engine becomes a special type of Module. Module can also be a network interface. To keep the minimum change in 3.0 for the addition of module and maintain the compatibility between 3.0 and 3.1, the name of csOrionEngineTable is still used in 3.0. After 3.1, this table will be rename as csOrionModuleTable.
I32 csOrionEngineTemperature	1.3.6.1.4.1.3085.3.1.5.2.1.8	Integer32	read-only	A temperature (in Fahrenheit or Celsius near the specified Engine. NOTE: This object is not used.
INT csOrionEngineType	1.3.6.1.4.1.3085.3.1.5.2.1.5	INTEGER	read-only	A type of the process engine.
I32 csOrionEngineUtilization	1.3.6.1.4.1.3085.3.1.5.2.1.7	Integer32	read-only	A % utilization for the specified Engine.
I32 csOrionEngineUtilizationLong	1.3.6.1.4.1.3085.3.1.5.2.1.39	Integer32	read-only	CPU utilization averaged over the last 10 minutes.
I32 csOrionEngineUtilizationMedium	1.3.6.1.4.1.3085.3.1.5.2.1.38	Integer32	read-only	CPU utilization averaged over the last 30 seconds.
csOrionEthInfo	1.3.6.1.4.1.3085.3.1.3.1
csOrionEvents	1.3.6.1.4.1.3085.3.1.1
csOrionEventsInfo	1.3.6.1.4.1.3085.3.1.1.1
csOrionExpFilterInfo	1.3.6.1.4.1.3085.3.1.6.14.2
csOrionFanEntry	1.3.6.1.4.1.3085.3.1.7.2.1		not-accessible	An entry containing management information applicable to fans.
INT csOrionFanEvent	1.3.6.1.4.1.3085.3.1.13.1	INTEGER	accessible-for-notify	A fan event.
I32 csOrionFanIndex	1.3.6.1.4.1.3085.3.1.7.2.1.1	Integer32	read-only	An index for a fan table.
G32 csOrionFanSpeed	1.3.6.1.4.1.3085.3.1.7.2.1.3	Gauge32	read-only	A fan speed (in RPS: Revolutions Per Second).
INT csOrionFanSpeedThreshold	1.3.6.1.4.1.3085.3.1.13.4	INTEGER	accessible-for-notify	The fan speed threshold (in revolutions per second).
INT csOrionFanState	1.3.6.1.4.1.3085.3.1.7.2.1.2	INTEGER	not-accessible	A fan operational state.
NTF csOrionFanStatusChange	1.3.6.1.4.1.3085.3.1.1.1.4			A csOrionFanStatusChange trap signifies that the SNMPv2 entity, acting in an agent role, has detected a change in the status of a fan.
csOrionFanTable	1.3.6.1.4.1.3085.3.1.7.2		not-accessible	A table for fans.
csOrionFanTempSensorEntry	1.3.6.1.4.1.3085.3.1.7.4.1		not-accessible	An entry containing management information applicable to fans.
INT csOrionFanTempSensorState	1.3.6.1.4.1.3085.3.1.7.4.1.1	INTEGER	not-accessible	the temperature sensor's operational status of a fan.
csOrionFanTempSensorTable	1.3.6.1.4.1.3085.3.1.7.4		not-accessible	A table for fans.
I32 csOrionFanTempSensorTemperature	1.3.6.1.4.1.3085.3.1.7.4.1.2	Integer32	not-accessible	A temperature (in Fahrenheit or Celsius) of the Fan.
INT csOrionFanTray	1.3.6.1.4.1.3085.3.1.7.5.1.1	INTEGER	read-only	Identifies the upper or lower fan tray.
csOrionFanTrayControlEntry	1.3.6.1.4.1.3085.3.1.7.5.1		not-accessible	An entry containing PIC H/W and F/W Revision information applicable to fan tray controllers.
csOrionFanTrayControlTable	1.3.6.1.4.1.3085.3.1.7.5		not-accessible	There is a controller for each of the fan tray. This table contains entries of the hardware and firmware revision information and entries used to enable/disable the event/trap generation.
INT csOrionFanTrayEventTrapGeneration	1.3.6.1.4.1.3085.3.1.7.5.1.7	INTEGER	read-write	Fan tray's firmware minor Revision information.
STR csOrionFanTrayFWMajorRevision	1.3.6.1.4.1.3085.3.1.7.5.1.3	DisplayString	read-only	Fan tray's firmware major Revision information.
STR csOrionFanTrayFWMinorRevision	1.3.6.1.4.1.3085.3.1.7.5.1.4	DisplayString	read-only	Fan tray's firmware minor Revision information.
STR csOrionFanTrayFWRelease	1.3.6.1.4.1.3085.3.1.7.5.1.5	DisplayString	read-only	The firmware release of the fan tray controller.
STR csOrionFanTrayFWReleaseDate	1.3.6.1.4.1.3085.3.1.7.5.1.6	DisplayString	read-only	A textual string containing information about the date of the firmware release.
STR csOrionFanTrayHWRevision	1.3.6.1.4.1.3085.3.1.7.5.1.2	DisplayString	read-only	Fan tray's hardward Revision information
NTF csOrionFarEndReceiveFailure	1.3.6.1.4.1.3085.3.1.1.1.49			A csOrionFarEndReceiveFailure trap signifies that the physical port on the remote end is receiving an alarm. Applicable to DS3.
csOrionFileSys	1.3.6.1.4.1.3085.3.1.2.6
STR csOrionFileSysReqDestFile	1.3.6.1.4.1.3085.3.1.2.6.1.1.4	DisplayString	read-create	This object is used to hold the source file for the file system operation. Must be set for copy and rename requests.
csOrionFileSysReqEntry	1.3.6.1.4.1.3085.3.1.2.6.1.1		not-accessible	An entry of File System Request Table.
I32 csOrionFileSysReqIndex	1.3.6.1.4.1.3085.3.1.2.6.1.1.1	Integer32	not-accessible	This object identifies a specific File System request entry. NMSs are expected to come up with a unique ID each request. This ID will also be used to index the File System result entry.
ROW csOrionFileSysReqRowStatus	1.3.6.1.4.1.3085.3.1.2.6.1.1.6	RowStatus	read-create	The RowStatus object for this table. This is used to add/delete rows from this table.
STR csOrionFileSysReqSrcFile	1.3.6.1.4.1.3085.3.1.2.6.1.1.3	DisplayString	read-create	This object is used to hold the source file for the file system operation. Must be set for 'delete', 'copy' and 'rename' requests. For 'load' request, the file to be loaded should be set using this object. If not set, the default file defined in csOrionSystemBootConfig will be loaded.
INT csOrionFileSysReqStatus	1.3.6.1.4.1.3085.3.1.2.6.1.1.5	INTEGER	read-only	This object is used to store the status of the File System request. operation. For 'dir' operation, csOrionFileSysResultTable should only be evaluated after this object yields opSuccess(3).
csOrionFileSysReqTable	1.3.6.1.4.1.3085.3.1.2.6.1		not-accessible	File System Request Table.
INT csOrionFileSysReqType	1.3.6.1.4.1.3085.3.1.2.6.1.1.2	INTEGER	read-create	This object specifies the filesystem operation stated in the enumeration above. We will add entries as we support additional filesystem commands. Objects that hold the parameters must also be set for commands that requires some arguments.
csOrionFileSysResultEntry	1.3.6.1.4.1.3085.3.1.2.6.2.1		not-accessible	An entry of File System Result Table. Each file returned from 'dir' request corresponds to an entry in csOrionFileSysResultEntry. Additional 'getnext' is expected to obtain the succeeding files. We will add objects in this table as we expose more file attributes.
STR csOrionFileSysResultFilename	1.3.6.1.4.1.3085.3.1.2.6.2.1.2	DisplayString	not-accessible	This object is used to hold the filename from the 'dir' request.
I32 csOrionFileSysResultFilesize	1.3.6.1.4.1.3085.3.1.2.6.2.1.3	Integer32	read-only	This object is used to hold the filesize from the 'dir' request.
I32 csOrionFileSysResultIndex	1.3.6.1.4.1.3085.3.1.2.6.2.1.1	Integer32	not-accessible	This object identifies a specific File System result entry. This index corresponds to the ID provided by NMSs on File System request.
csOrionFileSysResultTable	1.3.6.1.4.1.3085.3.1.2.6.2		not-accessible	File System Result Table. The object csOrionFileSysReqStatus should be evaluated before acquiring the results from this table.
csOrionFrInfo	1.3.6.1.4.1.3085.3.1.3.4
INT csOrionFRoIPAdminStatus	1.3.6.1.4.1.3085.3.1.6.12.1.1.7	INTEGER	read-write
I32 csOrionFRoIPConfDefaultServiceSlot	1.3.6.1.4.1.3085.3.1.6.12.1.1.5	Integer32	read-write	This object identifies the slot that all new transports created off this base inherit.
I32 csOrionFRoIPConfDefaultWindowSize	1.3.6.1.4.1.3085.3.1.6.12.1.1.3	Integer32	read-write
I32 csOrionFRoIPConfDefaultWindowTimeout	1.3.6.1.4.1.3085.3.1.6.12.1.1.4	Integer32	read-write
csOrionFRoIPConfEntry	1.3.6.1.4.1.3085.3.1.6.12.1.1		not-accessible	Each entry represents a set of FRoIPconfiguration for a Virtual Router. There is only one instance of FRoIP on a Virtual Router. An entry is created with IP address and default values for all the other objects when a VR is created. Creation of row by Network Management Stations is not allowed.
I32 csOrionFRoIPConfMaxPeer	1.3.6.1.4.1.3085.3.1.6.12.1.1.2	Integer32	read-write
I32 csOrionFRoIPConfNumActiveTransports	1.3.6.1.4.1.3085.3.1.6.12.1.1.6	Integer32	read-only
csOrionFRoIPConfTable	1.3.6.1.4.1.3085.3.1.6.12.1		not-accessible	This table contains general FRoIP Configuration parameters.
csOrionFRoIPInfo	1.3.6.1.4.1.3085.3.1.6.12
OPE csOrionFRoIPOperStatus	1.3.6.1.4.1.3085.3.1.6.12.1.1.8	OperStatus	read-only
INT csOrionFRoIPTransportAdminStatus	1.3.6.1.4.1.3085.3.1.6.12.2.1.14	INTEGER	read-create
I32 csOrionFRoIPTransportDefaultSlot	1.3.6.1.4.1.3085.3.1.6.12.2.1.8	Integer32	read-only
csOrionFRoIPTransportEntry	1.3.6.1.4.1.3085.3.1.6.12.2.1		not-accessible	Each entry represents a set of transport related objects of FRoIP on a Virtual Router.
I32 csOrionFRoIPTransportEventWindowSize	1.3.6.1.4.1.3085.3.1.6.12.2.1.6	Integer32	read-create
C32 csOrionFRoIPTransportInBytes	1.3.6.1.4.1.3085.3.1.6.12.2.1.12	Counter32	read-only
C32 csOrionFRoIPTransportInPkts	1.3.6.1.4.1.3085.3.1.6.12.2.1.10	Counter32	read-only
I32 csOrionFRoIPTransportKeepAlive	1.3.6.1.4.1.3085.3.1.6.12.2.1.5	Integer32	read-create
INT csOrionFRoIPTransportMode	1.3.6.1.4.1.3085.3.1.6.12.2.1.2	INTEGER	read-only
OPE csOrionFRoIPTransportOperStatus	1.3.6.1.4.1.3085.3.1.6.12.2.1.15	OperStatus	read-only
C32 csOrionFRoIPTransportOutBytes	1.3.6.1.4.1.3085.3.1.6.12.2.1.11	Counter32	read-only
C32 csOrionFRoIPTransportOutPkts	1.3.6.1.4.1.3085.3.1.6.12.2.1.9	Counter32	read-only
IP csOrionFRoIPTransportPeer	1.3.6.1.4.1.3085.3.1.6.12.2.1.1	IpAddress	not-accessible
I32 csOrionFRoIPTransportPermittedBadEvents	1.3.6.1.4.1.3085.3.1.6.12.2.1.7	Integer32	read-create
ROW csOrionFRoIPTransportRowStatus	1.3.6.1.4.1.3085.3.1.6.12.2.1.13	RowStatus	read-create
csOrionFRoIPTransportTable	1.3.6.1.4.1.3085.3.1.6.12.2		not-accessible	This table contains transport related objects of FRoIP.
I32 csOrionFRoIPTransportWindowSize	1.3.6.1.4.1.3085.3.1.6.12.2.1.3	Integer32	read-create
I32 csOrionFRoIPTransportWindowTimeout	1.3.6.1.4.1.3085.3.1.6.12.2.1.4	Integer32	read-create	In milliseconds
I32 csOrionFRoIPVIfaceId	1.3.6.1.4.1.3085.3.1.6.12.1.1.1	Integer32	read-write
INT csOrionFwAccCfgFlag	1.3.6.1.4.1.3085.3.1.6.2.1.1.5.1.1	INTEGER	read-write	This object is used to set the access configuration flag for FIREWALL.
INT csOrionFwAccessAction	1.3.6.1.4.1.3085.3.1.6.2.1.2.1.4.1.6	INTEGER	read-create	The action to perform on connections that match the Source Id, Destination Id, and the Protocol.
IP csOrionFwAccessDestAddr	1.3.6.1.4.1.3085.3.1.6.2.1.2.1.4.1.4	IpAddress	read-create	The Address of the destination of a proxy connection.
STR csOrionFwAccessDestAddrList	1.3.6.1.4.1.3085.3.1.6.2.1.2.1.4.1.11	DisplayString	read-create	The name of the address-list representing all destination addresses. For the proxy access entry to be operational there should be at least one entry in the csOrionAddressListTable table with its csOrionAddressListName attribute equal to the value of this attribute.
IP csOrionFwAccessDestMask	1.3.6.1.4.1.3085.3.1.6.2.1.2.1.4.1.5	IpAddress	read-create	The Mask of the destination of a proxy connection.
STR csOrionFwAccessDestPortList	1.3.6.1.4.1.3085.3.1.6.2.1.2.1.4.1.12	DisplayString	read-create	The name of the port-list representing all destination addresses. For the proxy access entry to be operational there should be at least one entry in the csOrionAddressListTable table with its csOrionAddressListName attribute equal to the value of this attribute.
csOrionFwAccessEntry	1.3.6.1.4.1.3085.3.1.6.2.1.2.1.4.1		not-accessible	Each entry specifies a single Access Policy.
STR csOrionFwAccessPolicy	1.3.6.1.4.1.3085.3.1.6.2.1.2.1.4.1.8	DisplayString	read-create	This is the name of the policy to be applied to any connection that matches the Source Id, Destination Id, and Protocol defined in this entry. The definition of the policy itself can be found in the corresponding protocol-specific Policy Table.
I32 csOrionFwAccessPortNumber	1.3.6.1.4.1.3085.3.1.6.2.1.2.1.4.1.7	Integer32	read-create	This object identifies the port number this access entry will be applied. Together with the Source Id, and the Destination Id, this is used to identify a specific connection.
I32 csOrionFwAccessPriority	1.3.6.1.4.1.3085.3.1.6.2.1.2.1.4.1.1	Integer32	not-accessible	The priority of this Access Table entry.
ROW csOrionFwAccessRowStatus	1.3.6.1.4.1.3085.3.1.6.2.1.2.1.4.1.9	RowStatus	read-create	A row status type for this Table entry.
IP csOrionFwAccessSourceAddr	1.3.6.1.4.1.3085.3.1.6.2.1.2.1.4.1.2	IpAddress	read-create	The Address of the source of a proxy connection.
STR csOrionFwAccessSourceAddrList	1.3.6.1.4.1.3085.3.1.6.2.1.2.1.4.1.10	DisplayString	read-create	The name of the address-list representing all source addresses. For the proxy access entry to be operational there should be at least one entry in the csOrionAddressListTable table with its csOrionAddressListName attribute equal to the value of this attribute.
IP csOrionFwAccessSourceMask	1.3.6.1.4.1.3085.3.1.6.2.1.2.1.4.1.3	IpAddress	read-create	The Mask of the source of a proxy connection.
csOrionFwAccessTable	1.3.6.1.4.1.3085.3.1.6.2.1.2.1.4		not-accessible	This table specifies the policy to apply for each new connection. A connection is identified by its source id, destination id, and protocol.
csOrionFwAolConfig	1.3.6.1.4.1.3085.3.1.6.2.1.2.11
I32 csOrionFwAolConfigEnd	1.3.6.1.4.1.3085.3.1.6.2.1.2.11.2	Integer32	read-only	End of this group. value undefined
csOrionFwAolPolicyEntry	1.3.6.1.4.1.3085.3.1.6.2.1.2.11.1.1		not-accessible	Each entry specifies a single AOL Policy.
STR csOrionFwAolPolicyName	1.3.6.1.4.1.3085.3.1.6.2.1.2.11.1.1.1	DisplayString	not-accessible	The name used to identify this AOL Policy entry.
I32 csOrionFwAolPolicyRemotePort	1.3.6.1.4.1.3085.3.1.6.2.1.2.11.1.1.4	Integer32	read-create	The internal AOL server's port number.
STR csOrionFwAolPolicyRemoteServer	1.3.6.1.4.1.3085.3.1.6.2.1.2.11.1.1.3	DisplayString	read-create	The internal AOL server.
ROW csOrionFwAolPolicyRowStatus	1.3.6.1.4.1.3085.3.1.6.2.1.2.11.1.1.5	RowStatus	read-create	The Row Status object for this table.
csOrionFwAolPolicyTable	1.3.6.1.4.1.3085.3.1.6.2.1.2.11.1		not-accessible	This table specifies individual AOL Policies. The Fw Access Table identifies the specific policies to apply to specific AOL connections.
I32 csOrionFwAolPolicyTimeout	1.3.6.1.4.1.3085.3.1.6.2.1.2.11.1.1.2	Integer32	read-create	The number of seconds the proxy is idle before disconnecting.
csOrionFwCompuServeConfig	1.3.6.1.4.1.3085.3.1.6.2.1.2.12
I32 csOrionFwCompuServeConfigEnd	1.3.6.1.4.1.3085.3.1.6.2.1.2.12.2	Integer32	read-only	End of this group. value undefined
csOrionFwCompuServePolicyEntry	1.3.6.1.4.1.3085.3.1.6.2.1.2.12.1.1		not-accessible	Each entry specifies a single CompuServe Policy.
STR csOrionFwCompuServePolicyName	1.3.6.1.4.1.3085.3.1.6.2.1.2.12.1.1.1	DisplayString	not-accessible	The name used to identify this CompuServe Policy entry.
I32 csOrionFwCompuServePolicyRemotePort	1.3.6.1.4.1.3085.3.1.6.2.1.2.12.1.1.4	Integer32	read-create	The internal CompuServe server's port number.
STR csOrionFwCompuServePolicyRemoteServer	1.3.6.1.4.1.3085.3.1.6.2.1.2.12.1.1.3	DisplayString	read-create	The internal CompuServe server.
ROW csOrionFwCompuServePolicyRowStatus	1.3.6.1.4.1.3085.3.1.6.2.1.2.12.1.1.5	RowStatus	read-create	The Row Status object for this table.
csOrionFwCompuServePolicyTable	1.3.6.1.4.1.3085.3.1.6.2.1.2.12.1		not-accessible	This table specifies individual CompuServe Policies. The Fw Access Table identifies the specific policies to apply to specific CompuServe connections.
I32 csOrionFwCompuServePolicyTimeout	1.3.6.1.4.1.3085.3.1.6.2.1.2.12.1.1.2	Integer32	read-create	The number of seconds the proxy is idle before disconnecting.
csOrionFwConfig	1.3.6.1.4.1.3085.3.1.6.2.1
INT csOrionFwDestAccess	1.3.6.1.4.1.3085.3.1.6.2.1.2.1.2.1.3	INTEGER	read-create	The access policy applied to the host or network identified in this entry.
IP csOrionFwDestAddr	1.3.6.1.4.1.3085.3.1.6.2.1.2.1.2.1.4	IpAddress	read-create	The Destination address for this entry.
csOrionFwDestEntry	1.3.6.1.4.1.3085.3.1.6.2.1.2.1.2.1		not-accessible	Each entry specifies a single destination host or network.
I32 csOrionFwDestIndex	1.3.6.1.4.1.3085.3.1.6.2.1.2.1.2.1.2	Integer32	not-accessible	The table index for this entry applies. This identifies the order in which the destination rules are applied.
IP csOrionFwDestMask	1.3.6.1.4.1.3085.3.1.6.2.1.2.1.2.1.5	IpAddress	read-create	The Destination address mask for this entry.
INT csOrionFwDestProxy	1.3.6.1.4.1.3085.3.1.6.2.1.2.1.2.1.1	INTEGER	not-accessible	The proxy to which this entry applies.
ROW csOrionFwDestRowStatus	1.3.6.1.4.1.3085.3.1.6.2.1.2.1.2.1.6	RowStatus	read-create	The RowStatus object for this entry.
csOrionFwDestTable	1.3.6.1.4.1.3085.3.1.6.2.1.2.1.2		not-accessible	This table specifies destination hosts and networks permissions for each applicable proxy. NOTE: This table has been replaced by csOrionFwAccessTable.
I32 csOrionFwDmzIf	1.3.6.1.4.1.3085.3.1.6.2.1.1.2.1.1	Integer32	not-accessible	The identifier of a 'Dmz' virtual interface.
IP csOrionFwDmzIfAddr	1.3.6.1.4.1.3085.3.1.6.2.1.1.2.1.2	IpAddress	not-accessible	The Ip address of a 'Dmz' virtual interface.
csOrionFwDmzIfEntry	1.3.6.1.4.1.3085.3.1.6.2.1.1.2.1		not-accessible
IP csOrionFwDmzIfMask	1.3.6.1.4.1.3085.3.1.6.2.1.1.2.1.3	IpAddress	read-create	The Ip Mask of a 'Dmz' virtual interface.
ROW csOrionFwDmzIfRowStatus	1.3.6.1.4.1.3085.3.1.6.2.1.1.2.1.4	RowStatus	read-create	The RowStatus object for this table.
csOrionFwDmzIfTable	1.3.6.1.4.1.3085.3.1.6.2.1.1.2		not-accessible	This contains the list of all the interfaces on the DmzIf side of the firewall. NOTE: This table is no longer in use.
csOrionFwEvLogEntry	1.3.6.1.4.1.3085.3.1.6.2.1.1.4.1		not-accessible	Each entry contains the event logging level for the FIREWALL module on a virtual router.
EVL csOrionFwEvLogLevel	1.3.6.1.4.1.3085.3.1.6.2.1.1.4.1.1	EvLogLevel	read-write	This object is used to set the level of details for event logs for FIREWALL.
csOrionFwEvLogTable	1.3.6.1.4.1.3085.3.1.6.2.1.1.4		not-accessible	A table for Event Logging Control for FIREWALL.
csOrionFwFtpAuthEntry	1.3.6.1.4.1.3085.3.1.6.2.1.2.2.3.1		not-accessible	Each entry specifies a authentication configuration.
INT csOrionFwFtpAuthMechanism	1.3.6.1.4.1.3085.3.1.6.2.1.2.2.3.1.3	INTEGER	read-create	The machanism used for authentication.
INT csOrionFwFtpAuthNonTransparentAuth	1.3.6.1.4.1.3085.3.1.6.2.1.2.2.3.1.5	INTEGER	read-create	The configuration for non-transparent mode.
I32 csOrionFwFtpAuthPasswdTimeout	1.3.6.1.4.1.3085.3.1.6.2.1.2.2.3.1.6	Integer32	read-create	The password inactive timeout.
STR csOrionFwFtpAuthPerUserAuthFilter	1.3.6.1.4.1.3085.3.1.6.2.1.2.2.3.1.7	DisplayString	read-create	The ldap filter name on per user base.
STR csOrionFwFtpAuthServers	1.3.6.1.4.1.3085.3.1.6.2.1.2.2.3.1.4	DisplayString	read-create	The authentication server address used by proxy to connect to.
INT csOrionFwFtpAuthServiceType	1.3.6.1.4.1.3085.3.1.6.2.1.2.2.3.1.2	INTEGER	read-create	The service type used for authentication.
INT csOrionFwFtpAuthStatus	1.3.6.1.4.1.3085.3.1.6.2.1.2.2.3.1.1	INTEGER	read-create	The current status of ftp authentication mode.
csOrionFwFtpAuthTable	1.3.6.1.4.1.3085.3.1.6.2.1.2.2.3		not-accessible	This table specifies the authentication configuration for the Ftp Proxy.
csOrionFwFtpConfig	1.3.6.1.4.1.3085.3.1.6.2.1.2.2
I32 csOrionFwFtpConfigEnd	1.3.6.1.4.1.3085.3.1.6.2.1.2.2.4	Integer32	read-only	End of this group. value undefined
csOrionFwFtpConfigEntry	1.3.6.1.4.1.3085.3.1.6.2.1.2.2.1.1		not-accessible	Each entry specifies a set of FTP proxy configuration parameters for a single firewall instance.
csOrionFwFtpConfigTable	1.3.6.1.4.1.3085.3.1.6.2.1.2.2.1		not-accessible	This table specifies Ftp functions that are permitted or denied. NOTE: This table has been replaced by csOrionFwFtpPolicyTable.
U32 csOrionFwFtpFunctionIds	1.3.6.1.4.1.3085.3.1.6.2.1.2.2.1.1.2	Unsigned32	read-write	A set of specific ftp functions. It is a bitmap where each bit represents a specific function that will be suported by this proxy. The following is the bit assignment, abor (0), acct (1), allo (2), appe (3), cdup (4), cwd (5), dele (6), help (7), list (8), mkd (9), mode (10), nlst (11), noop (12), pass (13), pasv (14), port (15), pwd (16), quit (17), retr (18), rmd (19), rnfr (20), rnto (21), stor (22), stou (23), stru (24), type (25), user (26), xcup (27), xcwd (28), xmkd (29), xpwd (30), xrmd (31)
U32 csOrionFwFtpLog	1.3.6.1.4.1.3085.3.1.6.2.1.2.2.1.1.1	Unsigned32	read-write	The ftp functions that are logged by this ftp proxy. It is a bitmap where each bit represents a function. The following is the bit assingment, abor (0), acct (1), allo (2), appe (3), cdup (4), cwd (5), dele (6), help (7), list (8), mkd (9), mode (10), nlst (11), noop (12), pass (13), pasv (14), port (15), pwd (16), quit (17), retr (18), rmd (19), rnfr (20), rnto (21), stor (22), stou (23), stru (24), type (25), user (26), xcup (27), xcwd (28), xmkd (29), xpwd (30), xrmd (31)
INT csOrionFwFtpPolicyAuthenticate	1.3.6.1.4.1.3085.3.1.6.2.1.2.2.2.1.2	INTEGER	read-create	This flag indicates if additional user authentication is required.
INT csOrionFwFtpPolicyDynamicPacketFilter	1.3.6.1.4.1.3085.3.1.6.2.1.2.2.2.1.7	INTEGER	read-create	When enabled, allows the ftp proxy to, create dynamic packet filter for data transfer (layer 2 forwarding)
csOrionFwFtpPolicyEntry	1.3.6.1.4.1.3085.3.1.6.2.1.2.2.2.1		not-accessible	Each entry specifies a single FtpPolicy Policy.
OCT csOrionFwFtpPolicyFunctionIds	1.3.6.1.4.1.3085.3.1.6.2.1.2.2.2.1.6	OCTET STRING	read-create	A set of specific ftp functions. It is a bitmap where each bit represents a specific function that will be suported by this proxy. The following is the bit assignment, abor (0), acct (1), allo (2), appe (3), cdup (4), cwd (5), dele (6), help (7), list (8), mkd (9), mode (10), nlst (11), noop (12), pass (13), pasv (14), port (15), pwd (16), quit (17), rein (18), rest (19), retr (20), rmd (21), rnfr (22), rnto (23), site (24), size (25), smnt (26), stat (27), stor (28), stou (29), stru (30), syst (31), type (32), user (33), xcup (34), xcwd (35), xmkd (36), xpwd (37), xrmd (38)
STR csOrionFwFtpPolicyHandoffAddr	1.3.6.1.4.1.3085.3.1.6.2.1.2.2.2.1.4	DisplayString	read-create	The host to which this proxy hands the proxy request.
OCT csOrionFwFtpPolicyLog	1.3.6.1.4.1.3085.3.1.6.2.1.2.2.2.1.5	OCTET STRING	read-create	The ftp functions that are logged by this ftp proxy. It is a bitmap where each bit represents a function. The following is the bit assingment, abor (0), acct (1), allo (2), appe (3), cdup (4), cwd (5), dele (6), help (7), list (8), mkd (9), mode (10), nlst (11), noop (12), pass (13), pasv (14), port (15), pwd (16), quit (17), rein (18), rest (19), retr (20), rmd (21), rnfr (22), rnto (23), site (24), size (25), smnt (26), stat (27), stor (28), stou (29), stru (30), syst (31), type (32), user (33), xcup (34), xcwd (35), xmkd (36), xpwd (37), xrmd (38)
STR csOrionFwFtpPolicyName	1.3.6.1.4.1.3085.3.1.6.2.1.2.2.2.1.1	DisplayString	not-accessible	The name used to identify this Ftp Policy entry.
ROW csOrionFwFtpPolicyRowStatus	1.3.6.1.4.1.3085.3.1.6.2.1.2.2.2.1.8	RowStatus	read-create	The Row Status object for this table.
csOrionFwFtpPolicyTable	1.3.6.1.4.1.3085.3.1.6.2.1.2.2.2		not-accessible	This table specifies individual Ftp Policies. The Fw Access Table identifies the specific policies to apply to specific Ftp connections.
I32 csOrionFwFtpPolicyTimeout	1.3.6.1.4.1.3085.3.1.6.2.1.2.2.2.1.3	Integer32	read-create	The number of seconds the proxy is idle before disconnecting.
csOrionFwGenCfgEntry	1.3.6.1.4.1.3085.3.1.6.2.1.1.5.1		not-accessible	Each entry contains the generic configuration for the FIREWALL module on a virtual router.
csOrionFwGenCfgTable	1.3.6.1.4.1.3085.3.1.6.2.1.1.5		not-accessible	A table for Configuration Control for FIREWALL.
I32 csOrionFwGenProxyActiveSessions	1.3.6.1.4.1.3085.3.1.6.2.1.2.1.1.1.4	Integer32	read-only	This is the current number of active sessions for a specific proxy.
I32 csOrionFwGenProxyChildLimit	1.3.6.1.4.1.3085.3.1.6.2.1.2.1.1.1.2	Integer32	read-write	The maximum number of child processes that each of this proxy's daemon allows to run at a given time. If this option is set to zero, each daemon allows an unlimited number of child processes to run at any given time. Note, this is not applicable to the smtp proxy.
csOrionFwGenProxyConfig	1.3.6.1.4.1.3085.3.1.6.2.1.2.1
I32 csOrionFwGenProxyConfigEnd	1.3.6.1.4.1.3085.3.1.6.2.1.2.1.6	Integer32	read-only	End of this group. value undefined
csOrionFwGenProxyEntry	1.3.6.1.4.1.3085.3.1.6.2.1.2.1.1.1		not-accessible	Each entry specifies a set of configuration parameters for a single proxy.
INT csOrionFwGenProxyId	1.3.6.1.4.1.3085.3.1.6.2.1.2.1.1.1.1	INTEGER	not-accessible	The proxy to which this entry applies.
INT csOrionFwGenProxyStatus	1.3.6.1.4.1.3085.3.1.6.2.1.2.1.1.1.3	INTEGER	read-write	This is used to enable/disable a specific proxy.
csOrionFwGenProxyTable	1.3.6.1.4.1.3085.3.1.6.2.1.2.1.1		not-accessible	This table specifies various configuration parameters for each applicable proxy.
csOrionFwGlobalConfig	1.3.6.1.4.1.3085.3.1.6.2.1.1
INT csOrionFwHostAccess	1.3.6.1.4.1.3085.3.1.6.2.1.2.1.3.1.3	INTEGER	read-create	The access policy applied to the host or network identified in this entry.
IP csOrionFwHostAddr	1.3.6.1.4.1.3085.3.1.6.2.1.2.1.3.1.4	IpAddress	read-create	The Source address for this entry.
csOrionFwHostEntry	1.3.6.1.4.1.3085.3.1.6.2.1.2.1.3.1		not-accessible	Each entry specifies a single destination host or network.
I32 csOrionFwHostIndex	1.3.6.1.4.1.3085.3.1.6.2.1.2.1.3.1.2	Integer32	not-accessible	The table index for this entry applies. This identifies the order in which the host rules are applied.
IP csOrionFwHostMask	1.3.6.1.4.1.3085.3.1.6.2.1.2.1.3.1.5	IpAddress	read-create	The Source address mask for this entry.
INT csOrionFwHostProxy	1.3.6.1.4.1.3085.3.1.6.2.1.2.1.3.1.1	INTEGER	not-accessible	The proxy to which this entry applies.
ROW csOrionFwHostRowStatus	1.3.6.1.4.1.3085.3.1.6.2.1.2.1.3.1.6	RowStatus	read-create	The RowStatus object for this entry.
csOrionFwHostTable	1.3.6.1.4.1.3085.3.1.6.2.1.2.1.3		not-accessible	This table specifies source hosts and networks permissions for each applicable proxy. NOTE: This table has been replaces by csOrionFwAccessTable.
csOrionFwHttpAuthEntry	1.3.6.1.4.1.3085.3.1.6.2.1.2.3.4.1		not-accessible	Each entry specifies a authentication configuration.
INT csOrionFwHttpAuthMechanism	1.3.6.1.4.1.3085.3.1.6.2.1.2.3.4.1.3	INTEGER	read-create	The machanism used for authentication.
INT csOrionFwHttpAuthNonTransparentAuth	1.3.6.1.4.1.3085.3.1.6.2.1.2.3.4.1.5	INTEGER	read-create	The configuration for non-transparent mode.
I32 csOrionFwHttpAuthPasswdTimeout	1.3.6.1.4.1.3085.3.1.6.2.1.2.3.4.1.6	Integer32	read-create	The password inactive timeout.
STR csOrionFwHttpAuthPerUserAuthFilter	1.3.6.1.4.1.3085.3.1.6.2.1.2.3.4.1.7	DisplayString	read-create	The ldap filter name on per user base.
STR csOrionFwHttpAuthServers	1.3.6.1.4.1.3085.3.1.6.2.1.2.3.4.1.4	DisplayString	read-create	The authentication server address used by proxy to connect to.
INT csOrionFwHttpAuthServiceType	1.3.6.1.4.1.3085.3.1.6.2.1.2.3.4.1.2	INTEGER	read-create	The service type used for authentication.
INT csOrionFwHttpAuthStatus	1.3.6.1.4.1.3085.3.1.6.2.1.2.3.4.1.1	INTEGER	read-create	The current status of http authentication mode.
csOrionFwHttpAuthTable	1.3.6.1.4.1.3085.3.1.6.2.1.2.3.4		not-accessible	This table specifies the authentication configuration for the Ftp Proxy.
csOrionFwHttpConfig	1.3.6.1.4.1.3085.3.1.6.2.1.2.3
I32 csOrionFwHttpConfigEnd	1.3.6.1.4.1.3085.3.1.6.2.1.2.3.5	Integer32	read-only	End of this group. value undefined
csOrionFwHttpConfigEntry	1.3.6.1.4.1.3085.3.1.6.2.1.2.3.1.1		not-accessible	Each entry specifies a set of Http proxy configuration parameters for a single Http instance.
csOrionFwHttpConfigTable	1.3.6.1.4.1.3085.3.1.6.2.1.2.3.1		not-accessible	This table specifies a set of Http proxy configuration parameters. NOTE: This table has been replaced by csOrionFwHttpPolicyTable.
U32 csOrionFwHttpFeatureIds	1.3.6.1.4.1.3085.3.1.6.2.1.2.3.1.1.3	Unsigned32	read-write	A set of specific http features. It is a bitmap where each bit represents an http feature supported by this proxy. The following is the bit assignment, activex (0), frames (1), java (2), script (3)
U32 csOrionFwHttpFunctionIds	1.3.6.1.4.1.3085.3.1.6.2.1.2.3.1.1.4	Unsigned32	read-write	A set of specific http functions. It is a bitmap where each bit represents an http function supported by this proxy. The following is the bit assignment, binary (0), dir (1), exec (2), ftp (3), httpreq (4), http (5), read (6), retr (7), stor (8), text (9), type (10), write (11)
U32 csOrionFwHttpHeaderIds	1.3.6.1.4.1.3085.3.1.6.2.1.2.3.1.1.5	Unsigned32	read-write	A set of specific http headers. It is a bitmap where each bit represents an http header supported by this proxy. The following is the bit assignment, accept-charset (0), accept-encoding (1), accept-language (2), allow (3), content-encoding (4), content-language (5), date (6), expires (7), from (8), if-modified-since (9), last-modified (10), link (11), mime-version (12), pragma (13), referer (14), retry-after (15), server (16), title (17), uri (18), user-agent (19), www-authenticate (20)
U32 csOrionFwHttpLog	1.3.6.1.4.1.3085.3.1.6.2.1.2.3.1.1.1	Unsigned32	read-write	The http functions that are logged by the http proxy. It is a bitmap where each bit represents an http function that can be logged. The following is the bit assignment, binary (0), dir (1), exec (2), ftp (3), httpreq (4), http (5), read (6), retr (7), stor (8), text (9), type (10), write (11)
STR csOrionFwHttpOurname	1.3.6.1.4.1.3085.3.1.6.2.1.2.3.1.1.2	DisplayString	read-write	The host and domain name that the HTTP proxy uses when putting its own name into non-transparent forarded URL's.
INT csOrionFwHttpPolicyAuthenticate	1.3.6.1.4.1.3085.3.1.6.2.1.2.3.2.1.2	INTEGER	read-create	This flag indicates if additional user authentication is required.
csOrionFwHttpPolicyEntry	1.3.6.1.4.1.3085.3.1.6.2.1.2.3.2.1		not-accessible	Each entry specifies a single HttpPolicy Policy.
OCT csOrionFwHttpPolicyFeatures	1.3.6.1.4.1.3085.3.1.6.2.1.2.3.2.1.8	OCTET STRING	read-create	A set of specific http features. It is a bitmap where each bit represents a specific features that will be suported by this proxy. By default, all features are allowed. The following is the bit assignment, actx (0), -- activex fram (1), -- frames htm2 (2), -- html 2 java (3), -- java kanj (4), -- kanji legk (5), -- legacy kanji mpf (6), -- multi part form scrp (7), -- java script
OCT csOrionFwHttpPolicyFunctionIds	1.3.6.1.4.1.3085.3.1.6.2.1.2.3.2.1.7	OCTET STRING	read-create	A set of specific http functions. It is a bitmap where each bit represents a specific function that will be suported by this proxy. The following is the bit assignment, bin (0), -- binary dir (1), -- directory exec (2), -- execute ftp (3), -- ftp hreq (4), -- http request http (5), -- http read (6), -- read retr (7), -- retrieve stor (8), -- store text (9), -- text type (10), -- type wrte (11) -- write
STR csOrionFwHttpPolicyHandoffAddr	1.3.6.1.4.1.3085.3.1.6.2.1.2.3.2.1.4	DisplayString	read-create	The host to which this proxy hands the proxy request.
OCT csOrionFwHttpPolicyHeader	1.3.6.1.4.1.3085.3.1.6.2.1.2.3.2.1.9	OCTET STRING	read-create	A set of specific http headers. It is a bitmap where each bit represents a specific header that will be suported by this proxy. By default, all http headers are supported. The following is the bit assignment, achr (0), -- accept charset aenc (1), -- accept encoding alng (2), -- accept language alow (3), -- allow cenc (4), -- content encoding clng (5), -- content language date (6), -- date exp (7), -- expires from (8), -- from imod (9), -- if modified since lmod (10), -- last modified lnk (11), -- link mime (12), -- mime version prgm (13), -- pragma refr (14), -- referer reta (15), -- retry after serv (16), -- server titl (17), -- title uri (18), -- uniform resource locator user (19), -- user agent www (20), -- www authenticate
OCT csOrionFwHttpPolicyLog	1.3.6.1.4.1.3085.3.1.6.2.1.2.3.2.1.6	OCTET STRING	read-create	The Http functions that are logged by this Http proxy. It is a bitmap where each bit represents a function. By default, all functions are not logged. The following is the bit assignment, bin (0), -- binary dir (1), -- directory exec (2), -- execute ftp (3), -- ftp hreq (4), -- http request http (5), -- http read (6), -- read retr (7), -- retrieve stor (8), -- store text (9), -- text type (10), -- type wrte (11) -- write
STR csOrionFwHttpPolicyName	1.3.6.1.4.1.3085.3.1.6.2.1.2.3.2.1.1	DisplayString	not-accessible	The name used to identify this Http Policy entry.
STR csOrionFwHttpPolicyOurname	1.3.6.1.4.1.3085.3.1.6.2.1.2.3.2.1.5	DisplayString	read-create	The host and domain name that the HTTP proxy uses when putting its own name into non-transparent forarded URL's.
ROW csOrionFwHttpPolicyRowStatus	1.3.6.1.4.1.3085.3.1.6.2.1.2.3.2.1.10	RowStatus	read-create	The Row Status object for this table.
csOrionFwHttpPolicyTable	1.3.6.1.4.1.3085.3.1.6.2.1.2.3.2		not-accessible	This table specifies individual Http Policies. The Fw Access Table identifies the specific policies to apply to specific Http connections.
I32 csOrionFwHttpPolicyTimeout	1.3.6.1.4.1.3085.3.1.6.2.1.2.3.2.1.3	Integer32	read-create	The number of seconds the proxy is idle before disconnecting.
INT csOrionFwHttpPortAccess	1.3.6.1.4.1.3085.3.1.6.2.1.2.3.3.1.3	INTEGER	read-create	The access to this port number.
csOrionFwHttpPortEntry	1.3.6.1.4.1.3085.3.1.6.2.1.2.3.3.1		not-accessible	Each entry specifies a single Http Policy.
I32 csOrionFwHttpPortNumber	1.3.6.1.4.1.3085.3.1.6.2.1.2.3.3.1.2	Integer32	read-create	The port number.
STR csOrionFwHttpPortPolicyName	1.3.6.1.4.1.3085.3.1.6.2.1.2.3.3.1.1	DisplayString	not-accessible	The policy name this port access is applied to.
ROW csOrionFwHttpPortRowStatus	1.3.6.1.4.1.3085.3.1.6.2.1.2.3.3.1.4	RowStatus	read-create	The RowStatus object for this entry.
csOrionFwHttpPortTable	1.3.6.1.4.1.3085.3.1.6.2.1.2.3.3		not-accessible	This table defines the specific ports that a particular HTTP policy will permit or deny.
csOrionFWInfo	1.3.6.1.4.1.3085.3.1.6.2
I32 csOrionFWInfoEnd	1.3.6.1.4.1.3085.3.1.6.2.2	Integer32	read-only	End of this group. value undefined
IP csOrionFwInsideIfAddr	1.3.6.1.4.1.3085.3.1.6.2.1.1.1.1.2	IpAddress	not-accessible	The Ip address of the 'inside' virtual interface.
csOrionFwInsideIfEntry	1.3.6.1.4.1.3085.3.1.6.2.1.1.1.1		not-accessible
I32 csOrionFwInsideIfIf	1.3.6.1.4.1.3085.3.1.6.2.1.1.1.1.1	Integer32	not-accessible	The identifier of the 'inside' virtual interface.
IP csOrionFwInsideIfMask	1.3.6.1.4.1.3085.3.1.6.2.1.1.1.1.3	IpAddress	read-create	The Ip Mask of the 'inside' virtual interface.
ROW csOrionFwInsideIfRowStatus	1.3.6.1.4.1.3085.3.1.6.2.1.1.1.1.4	RowStatus	read-create	The RowStatus object for this table.
csOrionFwInsideIfTable	1.3.6.1.4.1.3085.3.1.6.2.1.1.1		not-accessible	This contains the list of all the interfaces on the inside, or trusted, side of the firewall. NOTE: This table is no longer in use.
csOrionFwLdapConfig	1.3.6.1.4.1.3085.3.1.6.2.1.2.9
I32 csOrionFwLdapConfigEnd	1.3.6.1.4.1.3085.3.1.6.2.1.2.9.2	Integer32	read-only	End of this group. value undefined
INT csOrionFwLdapPolicyAuthenticate	1.3.6.1.4.1.3085.3.1.6.2.1.2.9.1.1.2	INTEGER	read-create	This flag indicates if additional user authentication is required. NOTE: Authenticate attribute is not applicable to this kind of application.
csOrionFwLdapPolicyEntry	1.3.6.1.4.1.3085.3.1.6.2.1.2.9.1.1		not-accessible	Each entry specifies a single LDAP Policy.
STR csOrionFwLdapPolicyName	1.3.6.1.4.1.3085.3.1.6.2.1.2.9.1.1.1	DisplayString	not-accessible	The name used to identify this LDAP Policy entry.
I32 csOrionFwLdapPolicyRemotePort	1.3.6.1.4.1.3085.3.1.6.2.1.2.9.1.1.5	Integer32	read-create	The internal LDAP server's port number.
STR csOrionFwLdapPolicyRemoteServer	1.3.6.1.4.1.3085.3.1.6.2.1.2.9.1.1.4	DisplayString	read-create	The internal LDAP server.
ROW csOrionFwLdapPolicyRowStatus	1.3.6.1.4.1.3085.3.1.6.2.1.2.9.1.1.6	RowStatus	read-create	The Row Status object for this table.
csOrionFwLdapPolicyTable	1.3.6.1.4.1.3085.3.1.6.2.1.2.9.1		not-accessible	This table specifies individual LDAP Policies. The Fw Access Table identifies the specific policies to apply to specific LDAP connections.
I32 csOrionFwLdapPolicyTimeout	1.3.6.1.4.1.3085.3.1.6.2.1.2.9.1.1.3	Integer32	read-create	The number of seconds the proxy is idle before disconnecting.
csOrionFwLnotesConfig	1.3.6.1.4.1.3085.3.1.6.2.1.2.10
I32 csOrionFwLnotesConfigEnd	1.3.6.1.4.1.3085.3.1.6.2.1.2.10.2	Integer32	read-only	End of this group. value undefined
INT csOrionFwLnotesPolicyAuthenticate	1.3.6.1.4.1.3085.3.1.6.2.1.2.10.1.1.2	INTEGER	read-create	This flag indicates if additional user authentication is required. NOTE: Authenticate attribute is not applicable to this kind of application.
csOrionFwLnotesPolicyEntry	1.3.6.1.4.1.3085.3.1.6.2.1.2.10.1.1		not-accessible	Each entry specifies a single LNOTES Policy.
STR csOrionFwLnotesPolicyName	1.3.6.1.4.1.3085.3.1.6.2.1.2.10.1.1.1	DisplayString	not-accessible	The name used to identify this LNOTES Policy entry.
I32 csOrionFwLnotesPolicyRemotePort	1.3.6.1.4.1.3085.3.1.6.2.1.2.10.1.1.5	Integer32	read-create	The internal Lotus Notes server's port number.
STR csOrionFwLnotesPolicyRemoteServer	1.3.6.1.4.1.3085.3.1.6.2.1.2.10.1.1.4	DisplayString	read-create	The internal Lotus Notes server.
ROW csOrionFwLnotesPolicyRowStatus	1.3.6.1.4.1.3085.3.1.6.2.1.2.10.1.1.6	RowStatus	read-create	The Row Status object for this table.
csOrionFwLnotesPolicyTable	1.3.6.1.4.1.3085.3.1.6.2.1.2.10.1		not-accessible	This table specifies individual LNOTES Policies. The Fw Access Table identifies the specific policies to apply to specific LNOTES connections.
I32 csOrionFwLnotesPolicyTimeout	1.3.6.1.4.1.3085.3.1.6.2.1.2.10.1.1.3	Integer32	read-create	The number of seconds the proxy is idle before disconnecting.
csOrionFwMsSqlConfig	1.3.6.1.4.1.3085.3.1.6.2.1.2.14
I32 csOrionFwMsSqlConfigEnd	1.3.6.1.4.1.3085.3.1.6.2.1.2.14.2	Integer32	read-only	End of this group. value undefined
csOrionFwMsSqlPolicyEntry	1.3.6.1.4.1.3085.3.1.6.2.1.2.14.1.1		not-accessible	Each entry specifies a single Microsoft SQL/Sybase Policy.
STR csOrionFwMsSqlPolicyName	1.3.6.1.4.1.3085.3.1.6.2.1.2.14.1.1.1	DisplayString	not-accessible	The name used to identify this Microsoft SQL/Sybase Policy entry.
I32 csOrionFwMsSqlPolicyRemotePort	1.3.6.1.4.1.3085.3.1.6.2.1.2.14.1.1.4	Integer32	read-create	The internal Microsoft SQL or Sybase server's port number.
STR csOrionFwMsSqlPolicyRemoteServer	1.3.6.1.4.1.3085.3.1.6.2.1.2.14.1.1.3	DisplayString	read-create	The internal Microsoft SQL or Sybase server.
ROW csOrionFwMsSqlPolicyRowStatus	1.3.6.1.4.1.3085.3.1.6.2.1.2.14.1.1.5	RowStatus	read-create	The Row Status object for this table.
csOrionFwMsSqlPolicyTable	1.3.6.1.4.1.3085.3.1.6.2.1.2.14.1		not-accessible	This table specifies individual Microsoft SQL/Sybase Policies. The Fw Access Table identifies the specific policies to apply to specific Microsoft SQL/Sybase connections.
I32 csOrionFwMsSqlPolicyTimeout	1.3.6.1.4.1.3085.3.1.6.2.1.2.14.1.1.2	Integer32	read-create	The number of seconds the proxy is idle before disconnecting.
csOrionFwNetMeetingConfig	1.3.6.1.4.1.3085.3.1.6.2.1.2.13
I32 csOrionFwNetMeetingConfigEnd	1.3.6.1.4.1.3085.3.1.6.2.1.2.13.2	Integer32	read-only	End of this group. value undefined
csOrionFwNetMeetingPolicyEntry	1.3.6.1.4.1.3085.3.1.6.2.1.2.13.1.1		not-accessible	Each entry specifies a single NetMeeting Policy.
STR csOrionFwNetMeetingPolicyName	1.3.6.1.4.1.3085.3.1.6.2.1.2.13.1.1.1	DisplayString	not-accessible	The name used to identify this NetMeeting Policy entry.
I32 csOrionFwNetMeetingPolicyRemotePort	1.3.6.1.4.1.3085.3.1.6.2.1.2.13.1.1.4	Integer32	read-create	The internal NetMeeting server's port number.
STR csOrionFwNetMeetingPolicyRemoteServer	1.3.6.1.4.1.3085.3.1.6.2.1.2.13.1.1.3	DisplayString	read-create	The internal NetMeeting server.
ROW csOrionFwNetMeetingPolicyRowStatus	1.3.6.1.4.1.3085.3.1.6.2.1.2.13.1.1.5	RowStatus	read-create	The Row Status object for this table.
csOrionFwNetMeetingPolicyTable	1.3.6.1.4.1.3085.3.1.6.2.1.2.13.1		not-accessible	This table specifies individual NetMeeting Policies. The Fw Access Table identifies the specific policies to apply to specific NetMeeting connections.
I32 csOrionFwNetMeetingPolicyTimeout	1.3.6.1.4.1.3085.3.1.6.2.1.2.13.1.1.2	Integer32	read-create	The number of seconds the proxy is idle before disconnecting.
csOrionFwNntpConfig	1.3.6.1.4.1.3085.3.1.6.2.1.2.8
I32 csOrionFwNntpConfigEnd	1.3.6.1.4.1.3085.3.1.6.2.1.2.8.2	Integer32	read-only	End of this group. value undefined
INT csOrionFwNntpPolicyAuthenticate	1.3.6.1.4.1.3085.3.1.6.2.1.2.8.1.1.2	INTEGER	read-create	This flag indicates if additional user authentication is required. NOTE: Authenticate attribute is not applicable to this kind of application.
csOrionFwNntpPolicyEntry	1.3.6.1.4.1.3085.3.1.6.2.1.2.8.1.1		not-accessible	Each entry specifies a single NNTP Policy.
STR csOrionFwNntpPolicyName	1.3.6.1.4.1.3085.3.1.6.2.1.2.8.1.1.1	DisplayString	not-accessible	The name used to identify this NNTP Policy entry.
I32 csOrionFwNntpPolicyRemotePort	1.3.6.1.4.1.3085.3.1.6.2.1.2.8.1.1.5	Integer32	read-create	The internal NEWS server's port number.
STR csOrionFwNntpPolicyRemoteServer	1.3.6.1.4.1.3085.3.1.6.2.1.2.8.1.1.4	DisplayString	read-create	The internal NEWS server.
ROW csOrionFwNntpPolicyRowStatus	1.3.6.1.4.1.3085.3.1.6.2.1.2.8.1.1.6	RowStatus	read-create	The Row Status object for this table.
csOrionFwNntpPolicyTable	1.3.6.1.4.1.3085.3.1.6.2.1.2.8.1		not-accessible	This table specifies individual NNTP Policies. The Fw Access Table identifies the specific policies to apply to specific NNTP connections.
I32 csOrionFwNntpPolicyTimeout	1.3.6.1.4.1.3085.3.1.6.2.1.2.8.1.1.3	Integer32	read-create	The number of seconds the proxy is idle before disconnecting.
IP csOrionFwNwGroupAddr	1.3.6.1.4.1.3085.3.1.6.2.1.1.3.1.2	IpAddress	not-accessible	The Ip address of this member of this Network Group.
csOrionFwNwGroupEntry	1.3.6.1.4.1.3085.3.1.6.2.1.1.3.1		not-accessible
INT csOrionFwNwGroupInterface	1.3.6.1.4.1.3085.3.1.6.2.1.1.3.1.4	INTEGER	read-create	The Interface from which this member of this Network Group can be reached.
IP csOrionFwNwGroupMask	1.3.6.1.4.1.3085.3.1.6.2.1.1.3.1.3	IpAddress	read-create	The Ip Mask assigned to this member of this Network Group.
STR csOrionFwNwGroupName	1.3.6.1.4.1.3085.3.1.6.2.1.1.3.1.1	DisplayString	not-accessible	The Name assigned to this Network Group.
ROW csOrionFwNwGroupRowStatus	1.3.6.1.4.1.3085.3.1.6.2.1.1.3.1.5	RowStatus	read-create	The RowStatus object for this table.
csOrionFwNwGroupTable	1.3.6.1.4.1.3085.3.1.6.2.1.1.3		not-accessible	This contains definitions of all the network groups referred to in other parts of the Firewall configuration. NOTE: This table is no longer in use.
csOrionFwPlugConfig	1.3.6.1.4.1.3085.3.1.6.2.1.2.7
I32 csOrionFwPlugConfigEnd	1.3.6.1.4.1.3085.3.1.6.2.1.2.7.2	Integer32	read-only	End of this group. value undefined
INT csOrionFwPlugPolicyAuthenticate	1.3.6.1.4.1.3085.3.1.6.2.1.2.7.1.1.2	INTEGER	read-create	This flag indicates if additional user authentication is required. NOTE: Authenticate attribute is not applicable to this kind of application.
csOrionFwPlugPolicyEntry	1.3.6.1.4.1.3085.3.1.6.2.1.2.7.1.1		not-accessible	Each entry specifies a single PLUG Policy.
STR csOrionFwPlugPolicyName	1.3.6.1.4.1.3085.3.1.6.2.1.2.7.1.1.1	DisplayString	not-accessible	The name used to identify this PLUG Policy entry.
I32 csOrionFwPlugPolicyRemotePort	1.3.6.1.4.1.3085.3.1.6.2.1.2.7.1.1.5	Integer32	read-create	The remote server's port number.
STR csOrionFwPlugPolicyRemoteServer	1.3.6.1.4.1.3085.3.1.6.2.1.2.7.1.1.4	DisplayString	read-create	The remote server.
ROW csOrionFwPlugPolicyRowStatus	1.3.6.1.4.1.3085.3.1.6.2.1.2.7.1.1.6	RowStatus	read-create	The Row Status object for this table.
csOrionFwPlugPolicyTable	1.3.6.1.4.1.3085.3.1.6.2.1.2.7.1		not-accessible	This table specifies individual PLUG Policies. The Fw Access Table identifies the specific policies to apply to specific PLUG connections.
I32 csOrionFwPlugPolicyTimeout	1.3.6.1.4.1.3085.3.1.6.2.1.2.7.1.1.3	Integer32	read-create	The number of seconds the proxy is idle before disconnecting.
csOrionFwPop3Config	1.3.6.1.4.1.3085.3.1.6.2.1.2.6
I32 csOrionFwPop3ConfigEnd	1.3.6.1.4.1.3085.3.1.6.2.1.2.6.2	Integer32	read-only	End of this group. value undefined
INT csOrionFwPop3PolicyAuthenticate	1.3.6.1.4.1.3085.3.1.6.2.1.2.6.1.1.2	INTEGER	read-create	This flag indicates if additional user authentication is required.
csOrionFwPop3PolicyEntry	1.3.6.1.4.1.3085.3.1.6.2.1.2.6.1.1		not-accessible	Each entry specifies a single POP3 Policy.
STR csOrionFwPop3PolicyName	1.3.6.1.4.1.3085.3.1.6.2.1.2.6.1.1.1	DisplayString	not-accessible	The name used to identify this POP3 Policy entry.
STR csOrionFwPop3PolicyPopServer	1.3.6.1.4.1.3085.3.1.6.2.1.2.6.1.1.4	DisplayString	read-create	The default internal POP server for email.
ROW csOrionFwPop3PolicyRowStatus	1.3.6.1.4.1.3085.3.1.6.2.1.2.6.1.1.7	RowStatus	read-create	The Row Status object for this table.
csOrionFwPop3PolicyTable	1.3.6.1.4.1.3085.3.1.6.2.1.2.6.1		not-accessible	This table specifies individual POP3 Policies. The Fw Access Table identifies the specific policies to apply to specific POP3 connections.
I32 csOrionFwPop3PolicyTimeout	1.3.6.1.4.1.3085.3.1.6.2.1.2.6.1.1.3	Integer32	read-create	The number of seconds the proxy is idle before disconnecting.
csOrionFwProxyConfig	1.3.6.1.4.1.3085.3.1.6.2.1.2
csOrionFwProxyDaemonEntry	1.3.6.1.4.1.3085.3.1.6.2.1.2.1.5.1		not-accessible	Each entry specifies a daemon port and the protocol.
I32 csOrionFwProxyDaemonPortNumber	1.3.6.1.4.1.3085.3.1.6.2.1.2.1.5.1.1	Integer32	not-accessible	The port number of this daemon.
INT csOrionFwProxyDaemonProtocol	1.3.6.1.4.1.3085.3.1.6.2.1.2.1.5.1.2	INTEGER	read-create	The protocol that uses this daemon. This is a mandatory during creation of entry.
ROW csOrionFwProxyDaemonRowStatus	1.3.6.1.4.1.3085.3.1.6.2.1.2.1.5.1.3	RowStatus	read-create	The RowStatus object for this entry.
csOrionFwProxyDaemonTable	1.3.6.1.4.1.3085.3.1.6.2.1.2.1.5		not-accessible	This is a list of daemon ports along with the protocol that uses it.
csOrionFwRshConfig	1.3.6.1.4.1.3085.3.1.6.2.1.2.15
csOrionFwRshPolicyEntry	1.3.6.1.4.1.3085.3.1.6.2.1.2.15.1.1		not-accessible	Each entry specifies a single RSH Policy.
STR csOrionFwRshPolicyName	1.3.6.1.4.1.3085.3.1.6.2.1.2.15.1.1.1	DisplayString	not-accessible	The name used to identify this RSH Policy entry.
STR csOrionFwRshPolicyRemoteServer	1.3.6.1.4.1.3085.3.1.6.2.1.2.15.1.1.3	DisplayString	read-create	The internal RSH server.
ROW csOrionFwRshPolicyRowStatus	1.3.6.1.4.1.3085.3.1.6.2.1.2.15.1.1.4	RowStatus	read-create	The Row Status object for this table.
csOrionFwRshPolicyTable	1.3.6.1.4.1.3085.3.1.6.2.1.2.15.1		not-accessible	This table specifies individual Remote Shell (RSH) Policies. The Fw Access Table identifies the specific policies to apply to specific RSH connections.
I32 csOrionFwRshPolicyTimeout	1.3.6.1.4.1.3085.3.1.6.2.1.2.15.1.1.2	Integer32	read-create	The number of seconds the proxy is idle before disconnecting. For RSH proxy, the idle timer is triggered if no activities are detected on BOTH control and error connections.
STR csOrionFwSmtpBadAdmin	1.3.6.1.4.1.3085.3.1.6.2.1.2.4.1.1.1	DisplayString	read-write	The username to which the smapd server forwards mail that it cannot deliver.
STR csOrionFwSmtpBadDir	1.3.6.1.4.1.3085.3.1.6.2.1.2.4.1.1.2	DisplayString	read-write	The directory in which the smapd server places any spooled mail that it cannot deliver.
csOrionFwSmtpConfig	1.3.6.1.4.1.3085.3.1.6.2.1.2.4
I32 csOrionFwSmtpConfigEnd	1.3.6.1.4.1.3085.3.1.6.2.1.2.4.5	Integer32	read-only	End of this group. value undefined
csOrionFwSmtpConfigEntry	1.3.6.1.4.1.3085.3.1.6.2.1.2.4.1.1		not-accessible	Each entry specifies a set of Smtp proxy configuration parameters for a single Smtp instance.
csOrionFwSmtpConfigTable	1.3.6.1.4.1.3085.3.1.6.2.1.2.4.1		not-accessible	This table specifies a set of Smtp proxy configuration parameters. NOTE: This table has been replaced by csOrionFwSmtpPolicyTable.
STR csOrionFwSmtpInternalMailHub	1.3.6.1.4.1.3085.3.1.6.2.1.2.4.1.1.5	DisplayString	read-write	This object identifies the Internal Mail Hub using either an IP address or a domain name.
STR csOrionFwSmtpLocalDomain	1.3.6.1.4.1.3085.3.1.6.2.1.2.4.1.1.6	DisplayString	read-write	Local domain that the firewall is serving -- IP address or domain name.
INT csOrionFwSmtpLogging	1.3.6.1.4.1.3085.3.1.6.2.1.2.4.1.1.7	INTEGER	read-write	Specifies if normal or no logging is to be done on SMTP proxy.
INT csOrionFwSmtpLogRelay	1.3.6.1.4.1.3085.3.1.6.2.1.2.4.1.1.8	INTEGER	read-write	Logs the rejection of mail relay attempts.
INT csOrionFwSmtpLogSpam	1.3.6.1.4.1.3085.3.1.6.2.1.2.4.1.1.9	INTEGER	read-write	Logs the rejection of mail spam attempts.
I32 csOrionFwSmtpMaxBytes	1.3.6.1.4.1.3085.3.1.6.2.1.2.4.1.1.10	Integer32	read-write	Maximum number of bytes of the mail content. The value 0 indicates no maximum.
I32 csOrionFwSmtpMaxChildren	1.3.6.1.4.1.3085.3.1.6.2.1.2.4.1.1.3	Integer32	read-write	The maximum number of child processes the smapd server can fork to handle mail.
I32 csOrionFwSmtpMaxRecip	1.3.6.1.4.1.3085.3.1.6.2.1.2.4.1.1.11	Integer32	read-write	The maximum number of recipients of the mail message. The value 0 indicates no maximum.
STR csOrionFwSmtpPolicyBadEmailAdmin	1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2.1.4	DisplayString	read-create	The administrator that will receive email notification of any bad email.
csOrionFwSmtpPolicyEntry	1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2.1		not-accessible	Each entry specifies a single SmtpPolicy Policy.
STR csOrionFwSmtpPolicyInternalMailHub	1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2.1.3	DisplayString	read-create	The default internal mail hub for email to go to if the destination mail for the protected domain(see ..).
STR csOrionFwSmtpPolicyLocalDomain	1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2.1.5	DisplayString	read-create	The domain currently being protected by the firewall.
INT csOrionFwSmtpPolicyLogging	1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2.1.8	INTEGER	read-create	Indicates if normal or no logging is to be done.
INT csOrionFwSmtpPolicyLogRelay	1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2.1.9	INTEGER	read-create	Indicates if normal or no logging is to be done.
INT csOrionFwSmtpPolicyLogSpam	1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2.1.11	INTEGER	read-create	Indicates if normal or no logging is to be done.
I32 csOrionFwSmtpPolicyMaxBytes	1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2.1.6	Integer32	read-create	This is the maximum size (in bytes) of the mail body that the proxy will accept. Any data beyond the maximum size is dropped. NOTE: zero (0) means no limit restriction.
I32 csOrionFwSmtpPolicyMaxRecipients	1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2.1.7	Integer32	read-create	This is the maximum recipients that the proxy will allow at any given email. NOTE: zero (0) means no limit restriction.
INT csOrionFwSmtpPolicyMimeCheck	1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2.1.14	INTEGER	read-create	This object controls whether the proxy attempts to validate the syntax of all MIME attachments within the email message
STR csOrionFwSmtpPolicyName	1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2.1.1	DisplayString	not-accessible	The name used to identify this Smtp Policy entry.
INT csOrionFwSmtpPolicyRelayReply	1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2.1.10	INTEGER	read-create	This object controls the type of response the SMTP proxy makes back to the connected SMTP server when unauthorized mail relaying is detected.
ROW csOrionFwSmtpPolicyRowStatus	1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2.1.13	RowStatus	read-create	Row status for this entry.
INT csOrionFwSmtpPolicySpamReply	1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2.1.12	INTEGER	read-create	This object controls the type of response the SMTP proxy makes back to the connected SMTP server when unauthorized mail relaying is detected.
csOrionFwSmtpPolicyTable	1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2		not-accessible	This table specifies individual SMTP Policies. The Fw Access Table identifies the specific policies to apply to specific SMTP connections.
I32 csOrionFwSmtpPolicyTimeout	1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2.1.2	Integer32	read-create	The timeout limit on idle connection in seconds.
INT csOrionFwSmtpRelayAccess	1.3.6.1.4.1.3085.3.1.6.2.1.2.4.3.1.3	INTEGER	read-create	The access to this email relay.
csOrionFwSmtpRelayEntry	1.3.6.1.4.1.3085.3.1.6.2.1.2.4.3.1		not-accessible	Each entry specifies a single email relay.
STR csOrionFwSmtpRelayPolicyName	1.3.6.1.4.1.3085.3.1.6.2.1.2.4.3.1.1	DisplayString	not-accessible	The policy name this email relay access is applied to.
I32 csOrionFwSmtpRelayReply	1.3.6.1.4.1.3085.3.1.6.2.1.2.4.1.1.13	Integer32	read-write	This object controls the type of response the SMTP proxy makes back to the connected SMTP server when unauthorized mail relaying is detected: 550 - Explicitly reject and notify the connected server. 250 - Acknowledge acceptance of the message but drop it at the firewall.
ROW csOrionFwSmtpRelayRowStatus	1.3.6.1.4.1.3085.3.1.6.2.1.2.4.3.1.4	RowStatus	read-create	The row status object for this entry.
STR csOrionFwSmtpRelaySource	1.3.6.1.4.1.3085.3.1.6.2.1.2.4.3.1.2	DisplayString	not-accessible	The source id (IP address, IP address with mask, network IP address, network IP address with mask) of the email relay.
csOrionFwSmtpRelayTable	1.3.6.1.4.1.3085.3.1.6.2.1.2.4.3		not-accessible	This table defines the specific email relay that a particular SMTP policy will permit or deny.
INT csOrionFwSmtpSpamAccess	1.3.6.1.4.1.3085.3.1.6.2.1.2.4.4.1.3	INTEGER	read-create	The access to this spam email.
csOrionFwSmtpSpamEntry	1.3.6.1.4.1.3085.3.1.6.2.1.2.4.4.1		not-accessible	Each entry specifies a single spamm email.
STR csOrionFwSmtpSpamPolicyName	1.3.6.1.4.1.3085.3.1.6.2.1.2.4.4.1.1	DisplayString	not-accessible	The policy name this spam email access is applied to.
I32 csOrionFwSmtpSpamReply	1.3.6.1.4.1.3085.3.1.6.2.1.2.4.1.1.12	Integer32	read-write	This object controls the type of response the SMTP proxy makes back to the connected SMTP server when nuisance mail is detected: 554 - Explicitly reject and notify the connected server. 250 - Acknowledge acceptance of the message but drop it at the firewall.
ROW csOrionFwSmtpSpamRowStatus	1.3.6.1.4.1.3085.3.1.6.2.1.2.4.4.1.4	RowStatus	read-create	The row status object for this entry.
STR csOrionFwSmtpSpamSource	1.3.6.1.4.1.3085.3.1.6.2.1.2.4.4.1.2	DisplayString	not-accessible	The source id (IP address, IP address with mask, network IP address, network IP address with mask) of the spam email.
csOrionFwSmtpSpamTable	1.3.6.1.4.1.3085.3.1.6.2.1.2.4.4		not-accessible	This table defines the specific spam email that a particular SMTP policy will permit or deny.
I32 csOrionFwSmtpWakeup	1.3.6.1.4.1.3085.3.1.6.2.1.2.4.1.1.4	Integer32	read-write	The number of seconds the smapd server sleeps between scans of spool directory for undelivered mail.
csOrionFwTelnetAuthEntry	1.3.6.1.4.1.3085.3.1.6.2.1.2.5.2.1		not-accessible	Each entry specifies a authentication configuration.
INT csOrionFwTelnetAuthMechanism	1.3.6.1.4.1.3085.3.1.6.2.1.2.5.2.1.3	INTEGER	read-create	The machanism used for authentication.
INT csOrionFwTelnetAuthNonTransparentAuth	1.3.6.1.4.1.3085.3.1.6.2.1.2.5.2.1.5	INTEGER	read-create	The configuration for non-transparent mode.
I32 csOrionFwTelnetAuthPasswdTimeout	1.3.6.1.4.1.3085.3.1.6.2.1.2.5.2.1.6	Integer32	read-create	The password inactive timeout.
STR csOrionFwTelnetAuthPerUserAuthFilter	1.3.6.1.4.1.3085.3.1.6.2.1.2.5.2.1.7	DisplayString	read-create	The ldap filter name on per user base.
STR csOrionFwTelnetAuthServers	1.3.6.1.4.1.3085.3.1.6.2.1.2.5.2.1.4	DisplayString	read-create	The authentication server address used by proxy to connect to.
INT csOrionFwTelnetAuthServiceType	1.3.6.1.4.1.3085.3.1.6.2.1.2.5.2.1.2	INTEGER	read-create	The service type used for authentication.
INT csOrionFwTelnetAuthStatus	1.3.6.1.4.1.3085.3.1.6.2.1.2.5.2.1.1	INTEGER	read-create	The current status of telnet authentication mode.
csOrionFwTelnetAuthTable	1.3.6.1.4.1.3085.3.1.6.2.1.2.5.2		not-accessible	This table specifies the authentication configuration for the Ftp Proxy.
csOrionFwTelnetConfig	1.3.6.1.4.1.3085.3.1.6.2.1.2.5
I32 csOrionFwTelnetConfigEnd	1.3.6.1.4.1.3085.3.1.6.2.1.2.5.3	Integer32	read-only	End of this group. value undefined
INT csOrionFwTelnetPolicyAuthenticate	1.3.6.1.4.1.3085.3.1.6.2.1.2.5.1.1.2	INTEGER	read-create	This flag indicates if additional user authentication is required.
csOrionFwTelnetPolicyEntry	1.3.6.1.4.1.3085.3.1.6.2.1.2.5.1.1		not-accessible	Each entry specifies a single Telnet Policy.
STR csOrionFwTelnetPolicyName	1.3.6.1.4.1.3085.3.1.6.2.1.2.5.1.1.1	DisplayString	not-accessible	The name used to identify this Telnet Policy entry.
INT csOrionFwTelnetPolicyPasswordChange	1.3.6.1.4.1.3085.3.1.6.2.1.2.5.1.1.4	INTEGER	read-create	This object indicates whether the user is allowed to change the password.
STR csOrionFwTelnetPolicyPrompt	1.3.6.1.4.1.3085.3.1.6.2.1.2.5.1.1.5	DisplayString	read-create	The command line promt the proxy should use for telnet sessions.
ROW csOrionFwTelnetPolicyRowStatus	1.3.6.1.4.1.3085.3.1.6.2.1.2.5.1.1.7	RowStatus	read-create	The Row Status object for this table.
csOrionFwTelnetPolicyTable	1.3.6.1.4.1.3085.3.1.6.2.1.2.5.1		not-accessible	This table specifies individual Telnet Policies. The Fw Access Table identifies the specific policies to apply to specific Telnet connections.
I32 csOrionFwTelnetPolicyTimeout	1.3.6.1.4.1.3085.3.1.6.2.1.2.5.1.1.3	Integer32	read-create	The number of seconds the proxy is idle before disconnecting.
INT csOrionFwTelnetPolicyXGateway	1.3.6.1.4.1.3085.3.1.6.2.1.2.5.1.1.6	INTEGER	read-create	This object indicates whether or not the client is allowed to use X proxy.
IP csOrionGenAclDstAddress	1.3.6.1.4.1.3085.3.1.6.1.2.1.4	IpAddress	read-create
STR csOrionGenAclDstAddressList	1.3.6.1.4.1.3085.3.1.6.1.2.1.14	DisplayString	read-create	The name of the address-list representing all destination addresses For the GAL to be operational there should be at least one entry in the csOrionAddressListTable table with its csOrionAddressListName attribute being equal to the value of this attribute
IP csOrionGenAclDstMask	1.3.6.1.4.1.3085.3.1.6.1.2.1.5	IpAddress	read-create
STR csOrionGenAclDstPortList	1.3.6.1.4.1.3085.3.1.6.1.2.1.16	DisplayString	read-create	The name of the numeric-list representing all source ports. An empty string represents a wildcard for this General Access List parameter. For the GAL to be operational there should be at least one entry in the csOrionNumericListTable table with its csOrionNumericListName attribute being equal to the value of this attribute.
I32 csOrionGenAclEndDstPort	1.3.6.1.4.1.3085.3.1.6.1.2.1.11	Integer32	read-create	The end of a range of ports that a packet's destination port must satisfy to match this access list entry. The value -1 represents a wildcard for this General Access List parameter.
I32 csOrionGenAclEndSrcPort	1.3.6.1.4.1.3085.3.1.6.1.2.1.9	Integer32	read-create	The end of a range of ports that a packet's source port must satisfy to match this access list entry. The value -1 represents a wildcard for this General Access List parameter.
csOrionGenAclEntry	1.3.6.1.4.1.3085.3.1.6.1.2.1		not-accessible	An entry containing filtering information used to classify packets.
I32 csOrionGenAclId	1.3.6.1.4.1.3085.3.1.6.1.2.1.1	Integer32	not-accessible	An identifier for this Access List Entry.
I32 csOrionGenAclProt	1.3.6.1.4.1.3085.3.1.6.1.2.1.6	Integer32	read-create	The Protocol ID that a packet must contain to match this access list entry. The value -1 represents a wildcard for this General Access List parameter.
IP csOrionGenAclSrcAddress	1.3.6.1.4.1.3085.3.1.6.1.2.1.2	IpAddress	read-create
STR csOrionGenAclSrcAddressList	1.3.6.1.4.1.3085.3.1.6.1.2.1.13	DisplayString	read-create	The name of the address-list representing all source addresses For the GAL to be operational there should be at least one entry in the csOrionAddressListTable table with its csOrionAddressListName attribute being equal to the value of this attribute
IP csOrionGenAclSrcMask	1.3.6.1.4.1.3085.3.1.6.1.2.1.3	IpAddress	read-create
STR csOrionGenAclSrcPortList	1.3.6.1.4.1.3085.3.1.6.1.2.1.15	DisplayString	read-create	The name of the numeric-list representing all source ports. For the GAL to be operational there should be at least one entry in the csOrionNumericListTable table with its csOrionNumericListName attribute being equal to the value of this attribute.
I32 csOrionGenAclStartDstPort	1.3.6.1.4.1.3085.3.1.6.1.2.1.10	Integer32	read-create	The beginning of a range of ports that a packet's destination port must satisfy to match this access list entry. The value -1 represents a wildcard for this General Access List parameter.
I32 csOrionGenAclStartSrcPort	1.3.6.1.4.1.3085.3.1.6.1.2.1.8	Integer32	read-create	The beginning of a range of ports that a packet's source port must satisfy to match this access list entry. The value -1 represents a wildcard for this General Access List parameter.
ROW csOrionGenAclStatus	1.3.6.1.4.1.3085.3.1.6.1.2.1.12	RowStatus	read-create	This object is used to create/delete entries in this table.
csOrionGenAclTable	1.3.6.1.4.1.3085.3.1.6.1.2		not-accessible	A list of Access List Entries. This is the table used by all the services (other than NAT) provided by Orion.
I32 csOrionGenAclTableEnd	1.3.6.1.4.1.3085.3.1.6.1.3	Integer32	read-only	End of this group. value undefined
I32 csOrionGenAclTos	1.3.6.1.4.1.3085.3.1.6.1.2.1.7	Integer32	read-create	The Type of Service that a packet must contain to match this access list entry. The value -1 represents a wildcard for this General Access List parameter.
csOrionGeneralSys	1.3.6.1.4.1.3085.3.1.2.1
csOrionGenSnmp	1.3.6.1.4.1.3085.3.1.9.1
I32 csOrionGlobalVPNIndex	1.3.6.1.4.1.3085.3.1.4.1.1.1.1	Integer32	read-only	A globally unique value, greater than zero, for each VPN, configured across all existing Orion boxes.
INT csOrionGreAdminStatus	1.3.6.1.4.1.3085.3.1.4.2.2.3.1.5	INTEGER	read-create	This object controls whether the GRE Tunnel is to be created or not.
INT csOrionGreCheckSum	1.3.6.1.4.1.3085.3.1.4.2.2.3.1.4	INTEGER	read-create	This object is used to enable/disable the checksum mechanism for this GRE Tunnel.
csOrionGreConfigEntry	1.3.6.1.4.1.3085.3.1.4.2.2.3.1		not-accessible	An entry containing configuration information applicable to a GRE Tunnel associated with this Virtual Interface.
csOrionGreConfigTable	1.3.6.1.4.1.3085.3.1.4.2.2.3		not-accessible	The GRE Tunneling configuration table.
U32 csOrionGreKey	1.3.6.1.4.1.3085.3.1.4.2.2.3.1.2	Unsigned32	read-create	The value of a key carried in the GRE header.
INT csOrionGreKeyEnable	1.3.6.1.4.1.3085.3.1.4.2.2.3.1.1	INTEGER	read-create	This object is used to enable/disable the GRE Key. When this object is disable, csOrionGreKey has no meaning
INT csOrionGreSequence	1.3.6.1.4.1.3085.3.1.4.2.2.3.1.3	INTEGER	read-create	This object is used to enable/disable the sequencing info carried in a GRE header.
csOrionGreStatsEntry	1.3.6.1.4.1.3085.3.1.4.2.2.4.1		not-accessible	An entry containing statistics information applicable to a GRE Tunnel associated with this Virtual Interface.
C32 csOrionGreStatsHeaderErrors	1.3.6.1.4.1.3085.3.1.4.2.2.4.1.4	Counter32	read-only	The total number of packets with header error received on this GRE tunnel.
C32 csOrionGreStatsKeyErrors	1.3.6.1.4.1.3085.3.1.4.2.2.4.1.1	Counter32	read-only	The total number of packets with GRE Key errors received on this GRE tunnel.
C32 csOrionGreStatsSequenceErrors	1.3.6.1.4.1.3085.3.1.4.2.2.4.1.2	Counter32	read-only	The total number of packets with out of sequence received on this GRE tunnel.
csOrionGreStatsTable	1.3.6.1.4.1.3085.3.1.4.2.2.4		not-accessible	The GRE Tunneling Statistics table.
C32 csOrionGreStatsUnknownProto	1.3.6.1.4.1.3085.3.1.4.2.2.4.1.3	Counter32	read-only	The number of packets with unknown protocols received on this GRE tunnel.
csOrionHWControlInfo	1.3.6.1.4.1.3085.3.1.7
csOrionHWNotifyInfo	1.3.6.1.4.1.3085.3.1.13
INT csOrionI2CDeviceId	1.3.6.1.4.1.3085.3.1.13.13	INTEGER	accessible-for-notify	An I2C device.
INT csOrionI2CDevicePresent	1.3.6.1.4.1.3085.3.1.13.14	INTEGER	accessible-for-notify	Indicates whether a given I2C device is present or not.
csOrionIgmp	1.3.6.1.4.1.3085.3.1.4.2.13
OCT csOrionIKECertCertificate	1.3.6.1.4.1.3085.3.1.6.5.6.1.4	OCTET STRING	read-create
csOrionIKECertEntry	1.3.6.1.4.1.3085.3.1.6.5.6.1		not-accessible	Each entry contains a specific certificate.
I32 csOrionIKECertFlag	1.3.6.1.4.1.3085.3.1.6.5.6.1.3	Integer32	read-create	Each bit within this object enables a specific feature within the Cert Table. Below is a list of the features and their corresponding bits identifiers. feature bit ------------------------------------------------------ no-crl 0 (more descriptions will follow).
STR csOrionIKECertMapName	1.3.6.1.4.1.3085.3.1.6.5.6.1.2	DisplayString	not-accessible	The IKE Crypto Map referred to by this Cert entry.
STR csOrionIKECertName	1.3.6.1.4.1.3085.3.1.6.5.6.1.1	DisplayString	not-accessible	The name assigned to this set of IKE Certificates.
OCT csOrionIKECertPrivateKey	1.3.6.1.4.1.3085.3.1.6.5.6.1.5	OCTET STRING	read-create
ROW csOrionIKECertStatus	1.3.6.1.4.1.3085.3.1.6.5.6.1.6	RowStatus	read-create	A row status type for the IKE Cert Entry.
csOrionIKECertTable	1.3.6.1.4.1.3085.3.1.6.5.6		not-accessible	A table of Certificates.
STR csOrionIKECryptoMapAddressPool	1.3.6.1.4.1.3085.3.1.6.5.4.1.33	DisplayString	read-create	This specifies whether IP address assignment is necessary for the remote dialup host and, if it is, how to obtain the address assignment. The following string values can be set: 'NONE' - means IP address assignment is not required for the remote dialup host 'AAA' - means the IP address is to be requested from an authentication or authorization server for the remote private IP address assignment - use the IP address in this address pool for the remote private IP address assignment; this name corresponds to csOrionIpLocalAddrPoolName, so the corresponding entry in csOrionIpLocalAddrPoolTable must have already existed. Applicable to ipsec-dialup crypto map only.
T/F csOrionIKECryptoMapDynamicRouteAdd	1.3.6.1.4.1.3085.3.1.6.5.4.1.34	TruthValue	read-create	If this object is set to true, IKE will dynamically load a static route when an SA is loaded. This static route will be used to route outgoing data packets to the tunnel VI for encryption to be sent to the remote ISDN network branches. IKE will also delete the route when the ISDN network SA pair is deleted. Note: This is implemented specifically for an ISDN network dialup. For the isakmp site-to-site tunnel, regular dialup tunnel and DSL dialup tunnel configurations, static routes for routing data packets to tunnel VI must be created manually instead of using this dynamic route addition capability, since this will degrade the IKE performance significantly, especially for regular and DSL dialup cases.
csOrionIKECryptoMapEntry	1.3.6.1.4.1.3085.3.1.6.5.4.1		not-accessible	Each entry contains a specific set of IKE Crypto Map for use by a Security Association.
U32 csOrionIKECryptoMapFlag	1.3.6.1.4.1.3085.3.1.6.5.4.1.3	Unsigned32	read-create	Each bit within this object enables a specific feature within the Crypto Map. Below is a list of the features and their corresponding bits identifiers. feature bit ------------------------------------------------------ pfs 0 pfs-identify 1 sa-per-net 5 -- note, sa-per-host & sa-per-net sa-per-host 6 -- are mutually exclusive sa-per-protocol 7 sa-per-port 8 main-mode 10 -- main-mode and aggressive-mode aggressive-mode 11 -- are mutually exclusive copy-df 21 dont-verify-padding 22 always-plain 29 passby 30 deny 31 end of description. NOTE: default value varies depending on csOrionIKECryptoMapType. 'isakmp' - default is 1056 (0x420 main-mode and sa-per-net) 'isakmpDialup' - default is 1088 (0x440 main-mode and sa-per-host).
I32 csOrionIKECryptoMapIdleTimeout	1.3.6.1.4.1.3085.3.1.6.5.4.1.21	Integer32	read-create	The idle timeout in seconds of the dialup connection. This will be used only when the csOrionIKECryptoMapType is 'isakmpDialup' otherwise its value is zero. Setting this object to 0 will turn the timer off. The minimum valid timeout value for a dialup connection is 60, i.e., 1 minute.
OCT csOrionIKECryptoMapKey	1.3.6.1.4.1.3085.3.1.6.5.4.1.6	OCTET STRING	read-create
STR csOrionIKECryptoMapLocalIdentity	1.3.6.1.4.1.3085.3.1.6.5.4.1.14	LongDisplayString	read-create	The Local IKE Identity for this Crypto Map entry. This can be either a hostname or an IP address (in dotted decimal format).
INT csOrionIKECryptoMapLocalIdentityType	1.3.6.1.4.1.3085.3.1.6.5.4.1.22	INTEGER	read-create	The Local IKE Identity type for this Crypto Map entry. This has to be set together with csOrionIKECryptoMapLocalIdentity.
I32 csOrionIKECryptoMapMatchAddress	1.3.6.1.4.1.3085.3.1.6.5.4.1.4	Integer32	read-create	Access List ID used by this IKE Crypto Map.
STR csOrionIKECryptoMapName	1.3.6.1.4.1.3085.3.1.6.5.4.1.1	DisplayString	not-accessible	An index for the IKE Crypto Map Table.
I32 csOrionIKECryptoMapNumber	1.3.6.1.4.1.3085.3.1.6.5.4.1.2	Integer32	not-accessible	An index for the IKE Crypto Map Table.
INT csOrionIKECryptoMapPfsGroup	1.3.6.1.4.1.3085.3.1.6.5.4.1.5	INTEGER	read-create	If one of the pfs features is enabled in csOrionIKECryptoMapFlags, this object is used to identify the Diffie-Helman group used for this IKE Crypto Map.
STR csOrionIKECryptoMapPolicy	1.3.6.1.4.1.3085.3.1.6.5.4.1.13	DisplayString	read-create	The IKE Policy used by this Crypto Map. This references an entry in csOrionIKEPolicyTable.
STR csOrionIKECryptoMapRemoteIdentity1	1.3.6.1.4.1.3085.3.1.6.5.4.1.23	LongDisplayString	read-create	The remote IKE Identity for this Crypto Map entry. This can be either a hostname or an IP address (in dotted decimal format). In the case of IP address, the format is 'a.b.c.d/w.x.y.z', where a.b.c.d is the ip address and w.x.y.z is the address mask. If address mask is not specified, it is assumed to be 255.255.255.255. This is used by IKE to differentiate the remote end so as to determine which crypto map with the unique map priority is to be used. This has to be set together with csOrionIKECryptoMapRemoteIdentityType1.
STR csOrionIKECryptoMapRemoteIdentity2	1.3.6.1.4.1.3085.3.1.6.5.4.1.24	LongDisplayString	read-create	The remote IKE Identity for this Crypto Map entry. This can be either a hostname or an IP address (in dotted decimal format). In the case of IP address, the format is 'a.b.c.d/w.x.y.z', where a.b.c.d is the ip address and w.x.y.z is the address mask. If address mask is not specified, it is assumed to be 255.255.255.255. This is used by IKE to differentiate the remote end so as to determine which crypto map with the unique map priority is to be used. This has to be set together with csOrionIKECryptoMapRemoteIdentityType2.
STR csOrionIKECryptoMapRemoteIdentity3	1.3.6.1.4.1.3085.3.1.6.5.4.1.25	LongDisplayString	read-create	The remote IKE Identity for this Crypto Map entry. This can be either a hostname or an IP address (in dotted decimal format). In the case of IP address, the format is 'a.b.c.d/w.x.y.z', where a.b.c.d is the ip address and w.x.y.z is the address mask. If address mask is not specified, it is assumed to be 255.255.255.255. This is used by IKE to differentiate the remote end so as to determine which crypto map with the unique map priority is to be used. This has to be set together with csOrionIKECryptoMapRemoteIdentityType3.
STR csOrionIKECryptoMapRemoteIdentity4	1.3.6.1.4.1.3085.3.1.6.5.4.1.26	LongDisplayString	read-create	The remote IKE Identity for this Crypto Map entry. This can be either a hostname or an IP address (in dotted decimal format). In the case of IP address, the format is 'a.b.c.d/w.x.y.z', where a.b.c.d is the ip address and w.x.y.z is the address mask. If address mask is not specified, it is assumed to be 255.255.255.255. This is used by IKE to differentiate the remote end so as to determine which crypto map with the unique map priority is to be used. This has to be set together with csOrionIKECryptoMapRemoteIdentityType4.
STR csOrionIKECryptoMapRemoteIdentity5	1.3.6.1.4.1.3085.3.1.6.5.4.1.27	LongDisplayString	read-create	The remote IKE Identity for this Crypto Map entry. This can be either a hostname or an IP address (in dotted decimal format). In the case of IP address, the format is 'a.b.c.d/w.x.y.z', where a.b.c.d is the ip address and w.x.y.z is the address mask. If address mask is not specified, it is assumed to be 255.255.255.255. This is used by IKE to differentiate the remote end so as to determine which crypto map with the unique map priority is to be used. This has to be set together with csOrionIKECryptoMapRemoteIdentityType5.
INT csOrionIKECryptoMapRemoteIdentityType1	1.3.6.1.4.1.3085.3.1.6.5.4.1.28	INTEGER	read-create	The remote IKE Identity type for this Crypto Map entry. This has to be set together with csOrionIKECryptoMapRemoteIdentity1.
INT csOrionIKECryptoMapRemoteIdentityType2	1.3.6.1.4.1.3085.3.1.6.5.4.1.29	INTEGER	read-create	The remote IKE Identity type for this Crypto Map entry. This has to be set together with csOrionIKECryptoMapRemoteIdentity2.
INT csOrionIKECryptoMapRemoteIdentityType3	1.3.6.1.4.1.3085.3.1.6.5.4.1.30	INTEGER	read-create	The remote IKE Identity type for this Crypto Map entry. This has to be set together with csOrionIKECryptoMapRemoteIdentity3.
INT csOrionIKECryptoMapRemoteIdentityType4	1.3.6.1.4.1.3085.3.1.6.5.4.1.31	INTEGER	read-create	The remote IKE Identity type for this Crypto Map entry. This has to be set together with csOrionIKECryptoMapRemoteIdentity4.
INT csOrionIKECryptoMapRemoteIdentityType5	1.3.6.1.4.1.3085.3.1.6.5.4.1.32	INTEGER	read-create	The remote IKE Identity type for this Crypto Map entry. This has to be set together with csOrionIKECryptoMapRemoteIdentity5.
I32 csOrionIKECryptoMapSaLifetimeHardKbytes	1.3.6.1.4.1.3085.3.1.6.5.4.1.18	Integer32	read-create	The number of kilobytes transferred before the SA is completely deleted. 0 is a special value and indicates that this particular Lifetime parameter is not to be conveyed to the remote side in any proposal that might be sent.
I32 csOrionIKECryptoMapSaLifetimeHardSec	1.3.6.1.4.1.3085.3.1.6.5.4.1.17	Integer32	read-create	The number of seconds that elapse before the SA is completely deleted. If this occurs on an active connection, a new ISAKMP negotiation starting at phase I takes place and a new SA is initiated. 0 is a special value and indicates that this particular Lifetime parameter is not to be conveyed to the remote side in any proposal that might be sent.
I32 csOrionIKECryptoMapSaLifetimeSoftKbytes	1.3.6.1.4.1.3085.3.1.6.5.4.1.16	Integer32	read-create	The soft rekey interval lifetime in kilobytes used by this IKE Crypto Map Entry. This defines the maximum amount of data transferred between ISAKMP phase II rekeys. This object is deprecated because its value is derived from csOrionIKECryptoMapSaLifetimeHardKbytes and is really not negotiated.
I32 csOrionIKECryptoMapSaLifetimeSoftSec	1.3.6.1.4.1.3085.3.1.6.5.4.1.15	Integer32	read-create	The soft rekey interval lifetime in seconds used by this IKE Crypto Map Entry. This defines the period of time that elapses between ISAKMP phase II rekeys. This object is deprecated because its value is derived from csOrionIKECryptoMapSaLifetimeHardSec and is really not negotiated.
ROW csOrionIKECryptoMapStatus	1.3.6.1.4.1.3085.3.1.6.5.4.1.19	RowStatus	read-create	A row status type for the IKE Crypto Map.
csOrionIKECryptoMapTable	1.3.6.1.4.1.3085.3.1.6.5.4		not-accessible	A table for IKE Crypto Map.
STR csOrionIKECryptoMapTransformSet1	1.3.6.1.4.1.3085.3.1.6.5.4.1.7	DisplayString	read-create	A transform set used by this IKE Crypto Map.
STR csOrionIKECryptoMapTransformSet2	1.3.6.1.4.1.3085.3.1.6.5.4.1.8	DisplayString	read-create	A transform set used by this IKE Crypto Map.
STR csOrionIKECryptoMapTransformSet3	1.3.6.1.4.1.3085.3.1.6.5.4.1.9	DisplayString	read-create	A transform set used by this IKE Crypto Map.
STR csOrionIKECryptoMapTransformSet4	1.3.6.1.4.1.3085.3.1.6.5.4.1.10	DisplayString	read-create	A transform set used by this IKE Crypto Map.
STR csOrionIKECryptoMapTransformSet5	1.3.6.1.4.1.3085.3.1.6.5.4.1.11	DisplayString	read-create	A transform set used by this IKE Crypto Map.
STR csOrionIKECryptoMapTransformSet6	1.3.6.1.4.1.3085.3.1.6.5.4.1.12	DisplayString	read-create	A transform set used by this IKE Crypto Map.
INT csOrionIKECryptoMapType	1.3.6.1.4.1.3085.3.1.6.5.4.1.20	INTEGER	read-create	This object indicates if this IKE Crytomap is used as a regular crytomap or for dial-up. Its value is only set during creation. Therefore, it must not be modified once created.
STR csOrionIKEDialupConnDistinguishName	1.3.6.1.4.1.3085.3.1.6.5.12.1.4	DisplayString	read-only	X.509 Distinguish Name of the dialup user, if the user uses certificates. For connection that does not use certificate, this will be an empty string.
csOrionIKEDialupConnEntry	1.3.6.1.4.1.3085.3.1.6.5.12.1		not-accessible	Each entry contains a specific IKE dialup connection.
I32 csOrionIKEDialupConnIndex	1.3.6.1.4.1.3085.3.1.6.5.12.1.1	Integer32	not-accessible	An index that uniquely identifies an entry in the IKE dialup connection table.
IP csOrionIKEDialupConnRemIpAddress	1.3.6.1.4.1.3085.3.1.6.5.12.1.2	IpAddress	read-only	IP address of the remote IpSec tunnel.
INT csOrionIKEDialupConnRowStatus	1.3.6.1.4.1.3085.3.1.6.5.12.1.5	INTEGER	read-write	This object allows for deletion of a connection if it is set to 'destroy'. 'active' is not a valid value to set. Get on this object will always yield 'active'.
csOrionIKEDialupConnTable	1.3.6.1.4.1.3085.3.1.6.5.12		not-accessible	A table of IKE dialup connection table.
STR csOrionIKEDialupConnUserId	1.3.6.1.4.1.3085.3.1.6.5.12.1.3	DisplayString	read-only	Login ID of the dialup user, if the user uses Xauth. If Xauth is skipped, this will be an empty string.
INT csOrionIKEPolicyAuthentication	1.3.6.1.4.1.3085.3.1.6.5.5.1.9	INTEGER	read-create	The Authentication algorithm employed by this Policy entry.
I32 csOrionIKEPolicyAuthorizationTypeFlag	1.3.6.1.4.1.3085.3.1.6.5.5.1.12	Integer32	read-create	Each bit within this object specifies the type of authorization to be enabled for IKE phase 1. options bit ------------------------------------------------------ certificate-presence 0 user-exists 1 enterprise-ID 2
INT csOrionIKEPolicyEncryption	1.3.6.1.4.1.3085.3.1.6.5.5.1.4	INTEGER	read-create	The Encryption algorithm employed by this IKE Policy Entry.
csOrionIKEPolicyEntry	1.3.6.1.4.1.3085.3.1.6.5.5.1		not-accessible	Each entry contains a specific set of IKE Crypto Map for use by a Security Association.
INT csOrionIKEPolicyHash	1.3.6.1.4.1.3085.3.1.6.5.5.1.3	INTEGER	read-create	The Hash algorithm employed by this IKE Policy Entry.
STR csOrionIKEPolicyName	1.3.6.1.4.1.3085.3.1.6.5.5.1.1	DisplayString	not-accessible	The name assigned to this set of IKE Policies.
INT csOrionIKEPolicyPfsGroup	1.3.6.1.4.1.3085.3.1.6.5.5.1.10	INTEGER	read-create	If one of the pfs features is enabled in csOrionIKECryptoMapFlags, this object is used to identify the Diffie-Helman group used for this IKE Crypto Map.
I32 csOrionIKEPolicyPriority	1.3.6.1.4.1.3085.3.1.6.5.5.1.2	Integer32	not-accessible	The priority assigned to this IKE Policy Entry.
I32 csOrionIKEPolicySaLifetimeHardKbytes	1.3.6.1.4.1.3085.3.1.6.5.5.1.8	Integer32	read-create	The number of kilobytes transferred before the SA is completely deleted. 0 is a special value and indicates that this particular Lifetime parameter is not to be conveyed to the remote side in any proposal that might be sent.
I32 csOrionIKEPolicySaLifetimeHardSec	1.3.6.1.4.1.3085.3.1.6.5.5.1.7	Integer32	read-create	The number of seconds that elapse before the SA is completely deleted. If this occurs on an active connection, a new ISAKMP negotiation starting at phase I takes place and a new SA is initiated. 0 is a special value and indicates that this particular Lifetime parameter is not to be conveyed to the remote side in any proposal that might be sent.
I32 csOrionIKEPolicySaLifetimeSoftKbytes	1.3.6.1.4.1.3085.3.1.6.5.5.1.6	Integer32	read-create	The soft rekey interval lifetime in kilobytes used by this IKE Crypto Map Entry. This defines the maximum amount of data transferred between ISAKMP phase II rekeys. This object is deprecated because its value is derived from csOrionIKEPolicySaLifetimeHardKbytes and is really not negotiated.
I32 csOrionIKEPolicySaLifetimeSoftSec	1.3.6.1.4.1.3085.3.1.6.5.5.1.5	Integer32	read-create	The soft rekey interval lifetime in seconds used by this IKE Crypto Map Entry. This defines the period of time that elapses between ISAKMP phase II rekeys. This object is deprecated because its value is derived from csOrionIKEPolicySaLifetimeHardSec and is really not negotiated.
ROW csOrionIKEPolicyStatus	1.3.6.1.4.1.3085.3.1.6.5.5.1.11	RowStatus	read-create	A row status type for the IKE Policy Entry.
csOrionIKEPolicyTable	1.3.6.1.4.1.3085.3.1.6.5.5		not-accessible	A table for IKE Crypto Map.
INT csOrionIKEStateAuthenticationType	1.3.6.1.4.1.3085.3.1.6.5.11.1.5	INTEGER	read-only	The authentication type of this SA. It could be a certificate or a pre-shared key.
C32 csOrionIKEStateBytesTransferred	1.3.6.1.4.1.3085.3.1.6.5.11.1.10	Counter32	read-only	The number of bytes transferred by this SA.
TIM csOrionIKEStateCreationTime	1.3.6.1.4.1.3085.3.1.6.5.11.1.6	TimeStamp	read-only	The creation time of this SA.
STR csOrionIKEStateCryptoAlgorithm	1.3.6.1.4.1.3085.3.1.6.5.11.1.11	DisplayString	read-only	The name of the crypto algorithm for this SA.
csOrionIKEStateEntry	1.3.6.1.4.1.3085.3.1.6.5.11.1		not-accessible	An entry containing IKE state information for this Virtual Interface.
TIM csOrionIKEStateExpirationTime	1.3.6.1.4.1.3085.3.1.6.5.11.1.7	TimeStamp	read-only	The expiration time of this SA.
STR csOrionIKEStateHashAlgorithm	1.3.6.1.4.1.3085.3.1.6.5.11.1.12	DisplayString	read-only	The name of the hash algorithm for this SA.
INT csOrionIKEStateInitRespondFlag	1.3.6.1.4.1.3085.3.1.6.5.11.1.4	INTEGER	read-only	Indicates if this SA is an initiator or a responder.
TIM csOrionIKEStateLastUsed	1.3.6.1.4.1.3085.3.1.6.5.11.1.9	TimeStamp	read-only	The last time this SA was used.
IP csOrionIKEStateLocalAddress	1.3.6.1.4.1.3085.3.1.6.5.11.1.2	IpAddress	read-only	The local IP address of this SA.
I32 csOrionIKEStateMaxRetryDuration	1.3.6.1.4.1.3085.3.1.6.5.11.1.17	Integer32	read-only	The maximum total retry duration for this SA. Fraction of a second must be specified in csOrionIKEStateMaxRetryDurationMicroSec.
I32 csOrionIKEStateMaxRetryDurationMicroSec	1.3.6.1.4.1.3085.3.1.6.5.11.1.18	Integer32	read-only	The micro-second part of csOrionIKEStateMaxRetryDuration.
C32 csOrionIKEStateNegotiations	1.3.6.1.4.1.3085.3.1.6.5.11.1.8	Counter32	read-only	The number of phase 1 ISAKMP/IKE negotiations for this SA.
STR csOrionIKEStatePrfAlgorithm	1.3.6.1.4.1.3085.3.1.6.5.11.1.13	DisplayString	read-only	The name of the PRF algorithm for this SA.
IP csOrionIKEStateRemoteAddress	1.3.6.1.4.1.3085.3.1.6.5.11.1.3	IpAddress	read-only	The remote IP address of this SA.
I32 csOrionIKEStateRetryLimit	1.3.6.1.4.1.3085.3.1.6.5.11.1.14	Integer32	read-only	The limit of retry counts for this SA.
I32 csOrionIKEStateRetryTimer	1.3.6.1.4.1.3085.3.1.6.5.11.1.15	Integer32	read-only	The retry interval in seconds. It indicates the duration from one retry to next retry for this SA. Fraction of a second must be specified in csOrionIKEStateRetryTimerMicroSec.
I32 csOrionIKEStateRetryTimerMicroSec	1.3.6.1.4.1.3085.3.1.6.5.11.1.16	Integer32	read-only	The micro-second part of csOrionIKEStateRetryTimer.
I32 csOrionIKEStateSAIndex	1.3.6.1.4.1.3085.3.1.6.5.11.1.1	Integer32	not-accessible	A unique value, greater than zero, for each SA.
csOrionIKEStateTable	1.3.6.1.4.1.3085.3.1.6.5.11		not-accessible	The IKE State table.
csOrionIKEStatsEntry	1.3.6.1.4.1.3085.3.1.6.5.10.1		not-accessible	An entry containing IKE statistics information for this Virtual Interface.
C32 csOrionIKEStatsPhase1InPkts	1.3.6.1.4.1.3085.3.1.6.5.10.1.3	Counter32	read-only	The number of IKE phase 1 packets received in this Virtual Interface.
C32 csOrionIKEStatsPhase1InPktsRejected	1.3.6.1.4.1.3085.3.1.6.5.10.1.4	Counter32	read-only	The number of rejected IKE phase 1 packets received in this Virtual Interface.
C32 csOrionIKEStatsPhase1Negotiations	1.3.6.1.4.1.3085.3.1.6.5.10.1.1	Counter32	read-only	The number of IKE phase 1 negotiations in this Virtual Interface.
C32 csOrionIKEStatsPhase1NegotiationsFailed	1.3.6.1.4.1.3085.3.1.6.5.10.1.2	Counter32	read-only	The number of Failed IKE phase 1 negotiations in this Virtual Interface.
C32 csOrionIKEStatsPhase1OutPkts	1.3.6.1.4.1.3085.3.1.6.5.10.1.5	Counter32	read-only	The number of IKE phase 1 packets transmitted this Virtual Interface.
C32 csOrionIKEStatsPhase2InPkts	1.3.6.1.4.1.3085.3.1.6.5.10.1.8	Counter32	read-only	The number of IKE phase 2 packets received in this Virtual Interface.
C32 csOrionIKEStatsPhase2InPktsRejected	1.3.6.1.4.1.3085.3.1.6.5.10.1.9	Counter32	read-only	The number of rejected IKE phase 2 packets received in this Virtual Interface.
C32 csOrionIKEStatsPhase2Negotiations	1.3.6.1.4.1.3085.3.1.6.5.10.1.6	Counter32	read-only	The number of IKE phase 2 negotiations in this Virtual Interface.
C32 csOrionIKEStatsPhase2NegotiationsFailed	1.3.6.1.4.1.3085.3.1.6.5.10.1.7	Counter32	read-only	The number of Failed IKE phase 2 negotiations in this Virtual Interface.
C32 csOrionIKEStatsPhase2OutPkts	1.3.6.1.4.1.3085.3.1.6.5.10.1.10	Counter32	read-only	The number of IKE phase 2 packets transmitted this Virtual Interface.
csOrionIKEStatsTable	1.3.6.1.4.1.3085.3.1.6.5.10		not-accessible	The IKE Statistics table.
STR csOrionIKESvrParamAccountingList	1.3.6.1.4.1.3085.3.1.6.5.7.1.19	DisplayString	read-create	The name of the accounting server list that IKE uses for accounting services. If no listname is provided, the default accounting list of this VR will be used.
STR csOrionIKESvrParamAuthenticationList	1.3.6.1.4.1.3085.3.1.6.5.7.1.17	DisplayString	read-create	The name of the authentication server list that IKE uses for authentication services. If no listname is provided, the default authentication list of this VR will be used.
STR csOrionIKESvrParamAuthorizationList	1.3.6.1.4.1.3085.3.1.6.5.7.1.18	DisplayString	read-create	The name of the authorization server list that IKE uses for authorization services. If no listname is provided, the default authorization list of this VR will be used.
csOrionIKESvrParamEntry	1.3.6.1.4.1.3085.3.1.6.5.7.1		not-accessible	Each entry contains parameter settings of an IKE server.
I32 csOrionIKESvrParamExpireTimer	1.3.6.1.4.1.3085.3.1.6.5.7.1.9	Integer32	read-create	Specifies the maximum time, in seconds, that the IKE server allows a negotiation to continue.
U32 csOrionIKESvrParamFlag	1.3.6.1.4.1.3085.3.1.6.5.7.1.2	Unsigned32	read-create	Each bit within this object specifies the compatibility options that the server uses by default. Below is a list of the features and their corresponding bits identifiers. options bit ------------------------------------------------------ old-pk-encryption-prf-key 0 old-payload-padding 1 old-message-padding 2 old-da-padding 3 old-id-in-hash 4 ignore-cert-request-payload 5 old-cr-format 6 use-zero-spi 7 End of description.
IP csOrionIKESvrParamIpAddress	1.3.6.1.4.1.3085.3.1.6.5.7.1.3	IpAddress	read-create	The address of the IKE server.
I32 csOrionIKESvrParamLocalSecretSize	1.3.6.1.4.1.3085.3.1.6.5.7.1.14	Integer32	read-create	The length of the local secrets, specified in bits.
STR csOrionIKESvrParamMapName	1.3.6.1.4.1.3085.3.1.6.5.7.1.1	DisplayString	not-accessible	The map name for this server.
I32 csOrionIKESvrParamMaxKeyLength	1.3.6.1.4.1.3085.3.1.6.5.7.1.12	Integer32	read-create	The maximum length of an encryption key, specified in bytes, that is accepted by the local end.
I32 csOrionIKESvrParamMaxSACount	1.3.6.1.4.1.3085.3.1.6.5.7.1.13	Integer32	read-create	Limits the maximum number of ISAKMP SA entries.
I32 csOrionIKESvrParamPort	1.3.6.1.4.1.3085.3.1.6.5.7.1.4	Integer32	read-create	The UDP port that the server is listening to.
IKE csOrionIKESvrParamRadiusAcctUserTypePriority1	1.3.6.1.4.1.3085.3.1.6.5.7.1.20	IKERadiusAcctUserType	read-create	Specifies the preferred user information to include in the RADIUS Accounting-Request User-Name attribute. Choices are: xauthUserId - xauth user login ID subjectAltName - subject alternative name from certificate distinguishedName - DN from certificate If the selected information is not available, IKE will try the type specified in csOrionIKESvrParamRadiusAcctUserTypePriority2.
IKE csOrionIKESvrParamRadiusAcctUserTypePriority2	1.3.6.1.4.1.3085.3.1.6.5.7.1.21	IKERadiusAcctUserType	read-create	Specifies the user information to include in the RADIUS Accounting-Request User-Name attribute if the type specified in csOrionIKESvrParamRadiusAcctUserTypePriority1 is not available: xauthUserId - xauth user login ID subjectAltName - subject alternative name from certificate distinguishedName - DN from certificate If the selected information is not available, IKE will try the type specified in csOrionIKESvrParamRadiusAcctUserTypePriority3.
IKE csOrionIKESvrParamRadiusAcctUserTypePriority3	1.3.6.1.4.1.3085.3.1.6.5.7.1.22	IKERadiusAcctUserType	read-create	Specifies the user information to include in the RADIUS Accounting-Request User-Name attribute if neither types specified in csOrionIKESvrParamRadiusAcctUserTypePriority1 and csOrionIKESvrParamRadiusAcctUserTypePriority2 are available: xauthUserId - xauth user login ID subjectAltName - subject alternative name from certificate distinguishedName - DN from certificate If the selected information is not available, IKE will include the assigned IP address in the user-name attribute.
I32 csOrionIKESvrParamRetryLimit	1.3.6.1.4.1.3085.3.1.6.5.7.1.5	Integer32	read-create	Limits the number of ISAKMP packet transmission retries. The server retries the transmission if it does not receive a response in csOrionIKESvrParamRetryTimer seconds.
I32 csOrionIKESvrParamRetryTimer	1.3.6.1.4.1.3085.3.1.6.5.7.1.6	Integer32	read-create	The amount of time, in seconds, that the server gives the remote end to reply to the sent request, before it will send the packet again. Fraction of a second must be specified in csOrionIKESvrParamRetryTimerMicroSec.
I32 csOrionIKESvrParamRetryTimerMaximum	1.3.6.1.4.1.3085.3.1.6.5.7.1.8	Integer32	read-create	Specifies the maximum value, in seconds, for the retry timer.
I32 csOrionIKESvrParamRetryTimerMicroSec	1.3.6.1.4.1.3085.3.1.6.5.7.1.7	Integer32	read-create	The microseconds part of csOrionIKESvrParamRetryTimer.
ROW csOrionIKESvrParamRowStatus	1.3.6.1.4.1.3085.3.1.6.5.7.1.16	RowStatus	read-create	A row status type for the IKE Server.
I32 csOrionIKESvrParamSecretRecreate	1.3.6.1.4.1.3085.3.1.6.5.7.1.10	Integer32	read-create	A local secret recreation timer expressed in seconds.
I32 csOrionIKESvrParamSPISize	1.3.6.1.4.1.3085.3.1.6.5.7.1.11	Integer32	read-create	A compatibility flag that specifies the number of bytes of zero that can be used when the security parameter index (SPI) of an ISAKMP security association is sent to the remote end.
csOrionIKESvrParamTable	1.3.6.1.4.1.3085.3.1.6.5.7		not-accessible	A table of IKE Server Parameters in every VR.
INT csOrionIKESvrParamTokenHashType	1.3.6.1.4.1.3085.3.1.6.5.7.1.15	INTEGER	read-create	A reference to an algorithm configuration block that defines the anti-clogging token hash algorithm.
NTF csOrionInletAirTempStatusChange	1.3.6.1.4.1.3085.3.1.1.1.46			This trap indicates that the inlet air temperature has changed states. If the value of csOrionSystemTempStatus is tempRisingAboveUpperCriticalThreshold(1), the given sensor has detected a transition from the normal temperature range to the hot range. If the value of csOrionSystemTempStatus is tempFallingBelowUpperCriticalThreshold (2), the given sensor has detected a transition from the 'hot' range back down to the normal range.
csOrionIp	1.3.6.1.4.1.3085.3.1.4.2.3
I32 csOrionIpEnd	1.3.6.1.4.1.3085.3.1.4.2.3.7	Integer32	read-only	End of this group. value undefined
IP csOrionIpLocalAddrPoolEndRange	1.3.6.1.4.1.3085.3.1.4.2.3.5.1.3	IpAddress	read-create	The end of the range of IP addresses in this pool.
csOrionIpLocalAddrPoolEntry	1.3.6.1.4.1.3085.3.1.4.2.3.5.1		not-accessible	Each entry represents a single pool of IP addresses.
STR csOrionIpLocalAddrPoolName	1.3.6.1.4.1.3085.3.1.4.2.3.5.1.1	DisplayString	not-accessible	The name of this address pool. This is used to identify a specific address pool.
ROW csOrionIpLocalAddrPoolRowStatus	1.3.6.1.4.1.3085.3.1.4.2.3.5.1.4	RowStatus	read-create	The RowStatus object for this table.
IP csOrionIpLocalAddrPoolStartRange	1.3.6.1.4.1.3085.3.1.4.2.3.5.1.2	IpAddress	read-create	The start of the range of IP addresses in this pool.
csOrionIpLocalAddrPoolTable	1.3.6.1.4.1.3085.3.1.4.2.3.5		not-accessible	This table contains pools of IP addresses. Clients can dynamically take addresses from a pool as they need them (and return them when finished).
EVL csOrionIpSecEventLogArea	1.3.6.1.4.1.3085.3.1.6.5.14.1.2	EvLogArea	read-write	This object is used to set the area of event logs for IPSEC/IKE.
csOrionIpSecEventLogEntry	1.3.6.1.4.1.3085.3.1.6.5.14.1		not-accessible	Each entry contains the event logging level and area for the IPSEC/IKE module on a virtual router.
EVL csOrionIpSecEventLogLevel	1.3.6.1.4.1.3085.3.1.6.5.14.1.1	EvLogLevel	read-write	This object is used to set the level of details for event logs for IPSEC/IKE.
csOrionIpSecEventLogTable	1.3.6.1.4.1.3085.3.1.6.5.14		not-accessible	A table for Event Logging Control for IPSEC/IKE.
EVL csOrionIpSecEvLogArea	1.3.6.1.4.1.3085.3.1.6.5.8.1.2	EvLogArea	read-write	This object is used to set the area of event logs for IPSEC/IKE.
csOrionIpSecEvLogEntry	1.3.6.1.4.1.3085.3.1.6.5.8.1		not-accessible	Each entry contains the event logging level and area for the IPSEC/IKE module on a virtual router.
EVL csOrionIpSecEvLogLevel	1.3.6.1.4.1.3085.3.1.6.5.8.1.1	EvLogLevel	read-write	This object is used to set the level of details for event logs for IPSEC/IKE.
csOrionIpSecEvLogTable	1.3.6.1.4.1.3085.3.1.6.5.8		not-accessible	A table for Event Logging Control for IPSEC/IKE. NOTE: this table has been moved to {csOrionEncryptInfo 13} since it should be under VI level instead of VR level.
INT csOrionIpSecStateAlgorithmType	1.3.6.1.4.1.3085.3.1.6.5.13.1.11	INTEGER	read-only	The algorithm type of this SA.
INT csOrionIpSecStateCreatorType	1.3.6.1.4.1.3085.3.1.6.5.13.1.6	INTEGER	read-only	The creator type of this SA.
INT csOrionIpSecStateDirection	1.3.6.1.4.1.3085.3.1.6.5.13.1.15	INTEGER	read-only	The sending and receiving direction of this SA.
STR csOrionIpSecStateEncryptionAlgorithm	1.3.6.1.4.1.3085.3.1.6.5.13.1.16	DisplayString	read-only	The name of the encryption algorithm for this SA.
csOrionIpSecStateEntry	1.3.6.1.4.1.3085.3.1.6.5.13.1		not-accessible	An entry containing IPSEC state information for this Virtual Interface.
TIM csOrionIpSecStateExpire	1.3.6.1.4.1.3085.3.1.6.5.13.1.13	TimeStamp	read-only	Indicate when this SA will be dropped.
STR csOrionIpSecStateHashAlgorithm	1.3.6.1.4.1.3085.3.1.6.5.13.1.17	DisplayString	read-only	The name of the hash algorithm for this SA.
TIM csOrionIpSecStateLastUsed	1.3.6.1.4.1.3085.3.1.6.5.13.1.14	TimeStamp	read-only	The last time this SA was used.
IP csOrionIpSecStateLocalEndPoint	1.3.6.1.4.1.3085.3.1.6.5.13.1.10	IpAddress	read-only	The IP address of local end point.
IP csOrionIpSecStateLocalGateway	1.3.6.1.4.1.3085.3.1.6.5.13.1.8	IpAddress	read-only	The IP address of local gateway.
I32 csOrionIpSecStatePort	1.3.6.1.4.1.3085.3.1.6.5.13.1.5	Integer32	read-only	The port number of the protocol; this value is connected to General Access list port number.
INT csOrionIpSecStateProtocol	1.3.6.1.4.1.3085.3.1.6.5.13.1.4	INTEGER	read-only	The protocol being used by this SA. This value is connected to General Access list protocol.
IP csOrionIpSecStateRemoteEndPoint	1.3.6.1.4.1.3085.3.1.6.5.13.1.9	IpAddress	read-only	The IP address of remote end point.
IP csOrionIpSecStateRemoteGateway	1.3.6.1.4.1.3085.3.1.6.5.13.1.7	IpAddress	read-only	The IP address of remote gateway.
I32 csOrionIpSecStateSAFlag	1.3.6.1.4.1.3085.3.1.6.5.13.1.3	Integer32	read-only	A flag Containing info regarding this SA. The value of the flag is the combination of the following values: tunnel-only (1), transport-only (2), esp-rfc1827 (8), ah-rfc1826 (16), esp-rfc2045 (32), ah-rfc1828 (64), ah-rfc2202 (128) Giving an example: the value 33 represents tunnel + esp-rfc2045
I32 csOrionIpSecStateSAIndex	1.3.6.1.4.1.3085.3.1.6.5.13.1.1	Integer32	not-accessible	A unique value, greater than zero, for each SA.
INT csOrionIpSecStateSAType	1.3.6.1.4.1.3085.3.1.6.5.13.1.12	INTEGER	read-only	The type of this SA.
U32 csOrionIpSecStateSpi	1.3.6.1.4.1.3085.3.1.6.5.13.1.2	Unsigned32	read-only	The SPI is an arbitray 32-bit value that, in combintation with the destination IP address and security protocol(AH), uniquely identified the Security Association for this datagram.
csOrionIpSecStateTable	1.3.6.1.4.1.3085.3.1.6.5.13		not-accessible	The IPSEC State table.
C32 csOrionIpSecStatsAhCryptoCepEstablishFailed	1.3.6.1.4.1.3085.3.1.6.5.9.1.23	Counter32	read-only	The number of crypto ceps that are AH encrypted failed to establish in this Virtual Interface.
C32 csOrionIpSecStatsAhCryptoCepEstablishOk	1.3.6.1.4.1.3085.3.1.6.5.9.1.22	Counter32	read-only	The number of crypto ceps that are AH encrypted sucessfully established in this Virtual Interface.
C32 csOrionIpSecStatsAhCurrentInboundSAs	1.3.6.1.4.1.3085.3.1.6.5.9.1.16	Counter32	read-only	The current number of AH encrypted inbound SAs for this Virtual Interface.
C32 csOrionIpSecStatsAhCurrentOutboundSAs	1.3.6.1.4.1.3085.3.1.6.5.9.1.19	Counter32	read-only	The current number of AH encrypted outbound SAs for this Virtual Interface.
C64 csOrionIpSecStatsAhDecryptPktsBad	1.3.6.1.4.1.3085.3.1.6.5.9.1.31	Counter64	read-only	The number of bad AH decrypted packets in this Virtual Interface.
C64 csOrionIpSecStatsAhDecryptPktsOk	1.3.6.1.4.1.3085.3.1.6.5.9.1.27	Counter64	read-only	The number of good AH decrypted packets in this Virtual Interface.
C64 csOrionIpSecStatsAhEncryptPktsBad	1.3.6.1.4.1.3085.3.1.6.5.9.1.30	Counter64	read-only	The number of bad AH encrypted packets in this Virtual Interface.
C64 csOrionIpSecStatsAhEncryptPktsOk	1.3.6.1.4.1.3085.3.1.6.5.9.1.26	Counter64	read-only	The number of good AH encrypted packets in this Virtual Interface.
C32 csOrionIpSecStatsAhTotalInboundSAs	1.3.6.1.4.1.3085.3.1.6.5.9.1.14	Counter32	read-only	The total number of AH encrypted inbound SAs for this Virtual Interface.
C32 csOrionIpSecStatsAhTotalInboundSAsFailed	1.3.6.1.4.1.3085.3.1.6.5.9.1.15	Counter32	read-only	The total number of failed AH encrypted inbound SAs for this Virtual Interface.
C32 csOrionIpSecStatsAhTotalOutboundSAs	1.3.6.1.4.1.3085.3.1.6.5.9.1.17	Counter32	read-only	The total number of AH encrypted outbound SAs for this Virtual Interface.
C32 csOrionIpSecStatsAhTotalOutboundSAsFailed	1.3.6.1.4.1.3085.3.1.6.5.9.1.18	Counter32	read-only	The total number of failed AH encrypted outbound SAs for this Virtual Interface.
csOrionIpSecStatsEntry	1.3.6.1.4.1.3085.3.1.6.5.9.1		not-accessible	An entry containing IPSEC statistics information for this Virtual Interface.
C32 csOrionIpSecStatsEspCryptoCepEstablishFailed	1.3.6.1.4.1.3085.3.1.6.5.9.1.21	Counter32	read-only	The number of crypto ceps that are ESP encrypted failed to establish in this Virtual Interface.
C32 csOrionIpSecStatsEspCryptoCepEstablishOk	1.3.6.1.4.1.3085.3.1.6.5.9.1.20	Counter32	read-only	The number of crypto ceps that are ESP encrypted sucessfully established in this Virtual Interface.
C32 csOrionIpSecStatsEspCurrentInboundSAs	1.3.6.1.4.1.3085.3.1.6.5.9.1.10	Counter32	read-only	The current number of ESP encrypted inbound SAs for this Virtual Interface.
C32 csOrionIpSecStatsEspCurrentOutboundSAs	1.3.6.1.4.1.3085.3.1.6.5.9.1.13	Counter32	read-only	The current number of ESP encrypted outbound SAs for this Virtual Interface.
C64 csOrionIpSecStatsEspDecryptPktsBad	1.3.6.1.4.1.3085.3.1.6.5.9.1.29	Counter64	read-only	The number of bad ESP decrypted packets in this Virtual Interface.
C64 csOrionIpSecStatsEspDecryptPktsOk	1.3.6.1.4.1.3085.3.1.6.5.9.1.25	Counter64	read-only	The number of good ESP decrypted packets in this Virtual Interface.
C64 csOrionIpSecStatsEspEncryptPktsBad	1.3.6.1.4.1.3085.3.1.6.5.9.1.28	Counter64	read-only	The number of bad ESP encrypted packets in this Virtual Interface.
C64 csOrionIpSecStatsEspEncryptPktsOk	1.3.6.1.4.1.3085.3.1.6.5.9.1.24	Counter64	read-only	The number of good ESP encrypted packets in this Virtual Interface.
C32 csOrionIpSecStatsEspTotalInboundSAs	1.3.6.1.4.1.3085.3.1.6.5.9.1.8	Counter32	read-only	The total number of ESP encrypted inbound SAs for this Virtual Interface.
C32 csOrionIpSecStatsEspTotalInboundSAsFailed	1.3.6.1.4.1.3085.3.1.6.5.9.1.9	Counter32	read-only	The total number of failed ESP encrypted inbound SAs for this Virtual Interface.
C32 csOrionIpSecStatsEspTotalOutboundSAs	1.3.6.1.4.1.3085.3.1.6.5.9.1.11	Counter32	read-only	The total number of ESP encrypted outbound SAs for this Virtual Interface.
C32 csOrionIpSecStatsEspTotalOutboundSAsFailed	1.3.6.1.4.1.3085.3.1.6.5.9.1.12	Counter32	read-only	The total number of failed ESP encrypted outbound SAs for this Virtual Interface.
C64 csOrionIpSecStatsRcvAhPktsBadAh	1.3.6.1.4.1.3085.3.1.6.5.9.1.2	Counter64	read-only	The number of bad AH packets that are AH encrypted and are received in this Virtual Interface.
C64 csOrionIpSecStatsRcvAhPktsBadSpi	1.3.6.1.4.1.3085.3.1.6.5.9.1.3	Counter64	read-only	The number of bad SPI packets that are AH encrypted and are received in this Virtual Interface.
C64 csOrionIpSecStatsRcvAhPktsDropped	1.3.6.1.4.1.3085.3.1.6.5.9.1.1	Counter64	read-only	The number of dropped packets that were AH encrypted and were received in this Virtual Interface.
C64 csOrionIpSecStatsRcvEspPktsBadEsp	1.3.6.1.4.1.3085.3.1.6.5.9.1.5	Counter64	read-only	The number of bad ESP packets that are ESP encrypted and were received in this Virtual Interface.
C64 csOrionIpSecStatsRcvEspPktsDropped	1.3.6.1.4.1.3085.3.1.6.5.9.1.4	Counter64	read-only	The number of dropped packets that were ESP encrypted and were received in this Virtual Interface.
C64 csOrionIpSecStatsRcvPktsOk	1.3.6.1.4.1.3085.3.1.6.5.9.1.6	Counter64	read-only	The number of good packets received in this Virtual Interface.
csOrionIpSecStatsTable	1.3.6.1.4.1.3085.3.1.6.5.9		not-accessible	The IPSEC Statistics table.
C64 csOrionIpSecStatsTxPktsDenied	1.3.6.1.4.1.3085.3.1.6.5.9.1.7	Counter64	read-only	The number of denied packets transmitted by this Virtual Interface.
STR csOrionIpSecTransform1	1.3.6.1.4.1.3085.3.1.6.5.1.1.2	DisplayString	read-create	The first Transform in the IpSec Transform Set table.
STR csOrionIpSecTransform2	1.3.6.1.4.1.3085.3.1.6.5.1.1.3	DisplayString	read-create	The second Transform in the IpSec Transform Set table. If no transform is specified, this object will have a zero length string.
STR csOrionIpSecTransform3	1.3.6.1.4.1.3085.3.1.6.5.1.1.4	DisplayString	read-create	The third Transform in the IpSec Transform Set table. If no transform is specified, this object will have a zero length string.
csOrionIpSecTransformEntry	1.3.6.1.4.1.3085.3.1.6.5.1.1		not-accessible	Each entry contains a specific set of IPSEC Transforms for use by a Security Association.
INT csOrionIpSecTransformInitVector	1.3.6.1.4.1.3085.3.1.6.5.1.1.5	INTEGER	read-create	The size of the Initial Vector used by the IPSEC Transform Set.
INT csOrionIpSecTransformMode	1.3.6.1.4.1.3085.3.1.6.5.1.1.6	INTEGER	read-create	The ipsec mode used by this IPSEC Transform Set.
STR csOrionIpSecTransformName	1.3.6.1.4.1.3085.3.1.6.5.1.1.1	DisplayString	not-accessible	An index for the IpSec Transform Set table.
ROW csOrionIpSecTransformStatus	1.3.6.1.4.1.3085.3.1.6.5.1.1.7	RowStatus	read-create	A row status type for the IpSec Transform Table.
csOrionIpSecTransformTable	1.3.6.1.4.1.3085.3.1.6.5.1		not-accessible	A table for IPSEC transforms.
csOrionIsis	1.3.6.1.4.1.3085.3.1.4.2.9
I32 csOrionIsisEnd	1.3.6.1.4.1.3085.3.1.4.2.9.6	Integer32	read-only	End of this group. value undefined
csOrionL2tpConfigEntry	1.3.6.1.4.1.3085.3.1.6.13.1.1		not-accessible	Each entry represents a single L2TP object for a Virtual Router. Only a single instance of this object is created upon creation of a VR.
I32 csOrionL2tpConfigMaxSessionsPerTunnel	1.3.6.1.4.1.3085.3.1.6.13.1.1.3	Integer32	read-write	This object defines the maximum sessions that can be established per tunnel.
I32 csOrionL2tpConfigMaxTunnels	1.3.6.1.4.1.3085.3.1.6.13.1.1.2	Integer32	read-write	This object defines the maximum number of L2TP tunnels that can be established.
INT csOrionL2tpConfigPppAuthProtocol	1.3.6.1.4.1.3085.3.1.6.13.1.1.17	INTEGER	read-write	This object is identical to csOrionPppIfConfigAuth.
I32 csOrionL2tpConfigPppConfigReqRetransmission	1.3.6.1.4.1.3085.3.1.6.13.1.1.14	Integer32	read-write	This object is identical to csOrionPppIfConfigReqRtx.
I32 csOrionL2tpConfigPppEchoTimeout	1.3.6.1.4.1.3085.3.1.6.13.1.1.19	Integer32	read-write	The echo timeout in seconds.
STR csOrionL2tpConfigPppIpPoolName	1.3.6.1.4.1.3085.3.1.6.13.1.1.20	DisplayString	read-write	The name of this address pool. This is used to identify a specific address pool.
I32 csOrionL2tpConfigPppReauthPeriod	1.3.6.1.4.1.3085.3.1.6.13.1.1.18	Integer32	read-write	This object is identical to csOrionPppIfReauth.
I32 csOrionL2tpConfigPppRestartTimeout	1.3.6.1.4.1.3085.3.1.6.13.1.1.15	Integer32	read-write	This object is identical to csOrionPppIfTimeout.
I32 csOrionL2tpConfigPppTermReqRetransmission	1.3.6.1.4.1.3085.3.1.6.13.1.1.16	Integer32	read-write	This object is identical to csOrionPppIfTerminateReqRtx.
I32 csOrionL2tpConfigServiceIf	1.3.6.1.4.1.3085.3.1.6.13.1.1.1	Integer32	read-write	This object defines the VI over which communication will occur with peers. This object can be set only when there is no tunnel.
INT csOrionL2tpConfigSessionFlowControl	1.3.6.1.4.1.3085.3.1.6.13.1.1.10	INTEGER	read-write	This object will be used to control whether the peer will be requested to flow control its transmissions. Note that regardless of the setting, if the peer requests that this peer flow control its transmissions, that request will be honored. Session Flow Control was part of draft specifications but not part of the RFC. This object should be set to Enable only if all the peers are using draft implementations.
INT csOrionL2tpConfigSessionPacketSequencing	1.3.6.1.4.1.3085.3.1.6.13.1.1.13	INTEGER	read-write	This object determines whether or not session payload packets will be requested to be sent with sequence numbers from the tunnel peer.
I32 csOrionL2tpConfigSessionRWS	1.3.6.1.4.1.3085.3.1.6.13.1.1.11	Integer32	read-write	This object controls the size of the session receive window. It will be advertised to the peer during session setup if csOrionL2tpConfigSessionFlowControl is set to Enable. The value 0 has special significance. It indicates that the peer must include sequence numbers in payload packets but the peer need not flow control its transmissions. This can be used to force a peer that is non-RFC compliant to include sequence numbers in payload packets.
I32 csOrionL2tpConfigSessionTxQueueSize	1.3.6.1.4.1.3085.3.1.6.13.1.1.12	Integer32	read-write	This object controls the size of the session-specific transmit queue. If the peer has requested flow control and the peer's session receive window is full, packets to be sent to that peer will be held in a queue waiting for the peer's receive window to open.
csOrionL2tpConfigTable	1.3.6.1.4.1.3085.3.1.6.13.1		not-accessible	This table contains general L2TP configuration parameters. IMPORTANT : Tunnels and session parameters are established using the parameters in this table. That means, changing the value of an object in this table will not affect existing tunnels and session. It will be applied for the tunnels and session that are to be established.
INT csOrionL2tpConfigTunnelAuthentication	1.3.6.1.4.1.3085.3.1.6.13.1.1.4	INTEGER	read-write	This object controls the tunnel authentication. If set to Enable, a challenge will be sent to the peer during tunnel creation. The tunnel will be torn down if the peer does not send a valid response. Regardless of the setting, if the peer sends a challenge during tunnel creation, a response will be sent.
I32 csOrionL2tpConfigTunnelEmptyTunnelTimeout	1.3.6.1.4.1.3085.3.1.6.13.1.1.9	Integer32	read-write	This object controls the time interval in seconds after which an alive but empty tunnel (i.e. a tunnel without sessions) will be torn down. Setting this to 0 will allow the empty tunnel to continue to exist until either the peer stops responding or the the tunnel is torn down by peer or the administrator.
I32 csOrionL2tpConfigTunnelHelloInterval	1.3.6.1.4.1.3085.3.1.6.13.1.1.5	Integer32	read-write	This object defines the interval (in seconds) in which HELLO (or keep-alive) packets are to be sent to the tunnel peer. Setting this to 0 disables sending of HELLO packets
I32 csOrionL2tpConfigTunnelMaxRetransmissions	1.3.6.1.4.1.3085.3.1.6.13.1.1.6	Integer32	read-write	This object defines the number of retransmissions which the tunnel will attempt before assuming that the peer is no longer responding.
I32 csOrionL2tpConfigTunnelMaxRetransmissionTimeout	1.3.6.1.4.1.3085.3.1.6.13.1.1.7	Integer32	read-write	This object defines the maximum retransmission timeout interval in seconds which the tunnel will wait before retransmitting a control packet that has not been acknowledged.
I32 csOrionL2tpConfigTunnelRWS	1.3.6.1.4.1.3085.3.1.6.13.1.1.8	Integer32	read-write	This object defines the control channel receive window size. It specifies the maximum number of packets the tunnel peer can send without waiting for an acknowledgement from this peer.
csOrionL2tpInfo	1.3.6.1.4.1.3085.3.1.6.13
I32 csOrionL2tpInfoEnd	1.3.6.1.4.1.3085.3.1.6.13.10	Integer32	read-only	End of this group. value undefined
INT csOrionL2tpSessionCallType	1.3.6.1.4.1.3085.3.1.6.13.3.1.14	INTEGER	read-only	This object indicates the type of call and the role this tunnel peer is providing for this session. For example, lacIncoming(1) indicates that this tunnel peer is acting as a LAC and generated a Incoming-Call-Request to the tunnel peer (the LNS). Note that tunnel peers can be both LAC and LNS simultaneously.
csOrionL2tpSessionEntry	1.3.6.1.4.1.3085.3.1.6.13.3.1		not-accessible	Each entry represents a single session object in a specific tunnel.
INT csOrionL2tpSessionFlowControl	1.3.6.1.4.1.3085.3.1.6.13.3.1.2	INTEGER	read-only	This object will be used to control whether the peer will be requested to flow control its transmissions. Note that regardless of the setting, if the peer requests that this peer flow control its transmissions, that request will be honored. Session Flow Control was part of draft specifications but not part of the RFC. This object should be set to Enable only if all the peers are using draft implementations.
I32 csOrionL2tpSessionLocalId	1.3.6.1.4.1.3085.3.1.6.13.3.1.1	Integer32	not-accessible	Each session is assigned a random locally unique tunnel-specific identifier when it is created. The session identifier can be used as an index to identify a particular session in a tunnel.
IP csOrionL2tpSessionLocalIpAddress	1.3.6.1.4.1.3085.3.1.6.13.3.1.12	IpAddress	read-only	The IP address for this sesssion. It is dynamically assigned form the csOrionL2tpConfigPppIpPoolName.
INT csOrionL2tpSessionPacketSequencing	1.3.6.1.4.1.3085.3.1.6.13.3.1.5	INTEGER	read-only	This object determines whether or not session payload packets will be requested to be sent with sequence numbers from the tunnel peer.
I32 csOrionL2tpSessionRemoteCallId	1.3.6.1.4.1.3085.3.1.6.13.3.1.7	Integer32	read-only	This object is the identifier assigned to the session by the peer. This identifier is unique only for a given peer in a specific tunnel.
INT csOrionL2tpSessionRemoteFlowControl	1.3.6.1.4.1.3085.3.1.6.13.3.1.8	INTEGER	read-only	This object indicates whether flow control is requested by the peer or not.
IP csOrionL2tpSessionRemoteIpAddress	1.3.6.1.4.1.3085.3.1.6.13.3.1.13	IpAddress	read-only	The IP address on the other side of this sesssion.
I32 csOrionL2tpSessionRemoteRWS	1.3.6.1.4.1.3085.3.1.6.13.3.1.9	Integer32	read-only	This is the session receive window size advertised by the peer during session creation. It specifies the number of payload packets that can be sent to the peer without waiting for an acknowledgement. If this is non-zero it means that the peer has requested flow control.
ROW csOrionL2tpSessionRowStatus	1.3.6.1.4.1.3085.3.1.6.13.3.1.11	RowStatus	read-write	The row status for this table. Used only for deleting this session. IMPORTANT: (1) entries on this table are created when a session is established by the peer. Therefore, creation of entry thru SNMP SET request is not allowed. (2) the peer usually tears down the session.
I32 csOrionL2tpSessionRWS	1.3.6.1.4.1.3085.3.1.6.13.3.1.3	Integer32	read-only	This object controls the size of the session receive window. It will be advertised to the peer during session setup if csOrionL2tpConfigSessionFlowControl is set to Enable. The value 0 has special significance. It indicates that the peer must include sequence numbers in payload packets but the peer need not flow control its transmissions. This can be used to force a peer that is non-RFC compliant to include sequence numbers in payload packets.
INT csOrionL2tpSessionState	1.3.6.1.4.1.3085.3.1.6.13.3.1.15	INTEGER	read-only	This object determines the current state of the session or call.
csOrionL2tpSessionTable	1.3.6.1.4.1.3085.3.1.6.13.3		not-accessible	The entries in this table are the L2TP sessions established in a specific tunnel.
I32 csOrionL2tpSessionTxQueueSize	1.3.6.1.4.1.3085.3.1.6.13.3.1.4	Integer32	read-only	If the peer has requested flow control and the peer's session receive window is full, packets to be sent to that peer will be held in a queue waiting for the peer's receive window to open. This object controls the size of the session-specific transmit queue.
I32 csOrionL2tpSessionUpTime	1.3.6.1.4.1.3085.3.1.6.13.3.1.6	Integer32	read-only	This object indicates the number of seconds this session has been up since established.
STR csOrionL2tpSessionUsername	1.3.6.1.4.1.3085.3.1.6.13.3.1.10	DisplayString	read-only	This is the name of the user on whose behalf the session was created.
G32 csOrionL2tpStatsActiveSessions	1.3.6.1.4.1.3085.3.1.6.13.8.1.7	Gauge32	read-only	This object returns the number of sessions that are currently active.
G32 csOrionL2tpStatsActiveTunnels	1.3.6.1.4.1.3085.3.1.6.13.8.1.4	Gauge32	read-only	This object returns the number of tunnels that are currently active.
C32 csOrionL2tpStatsControlRecvOctets	1.3.6.1.4.1.3085.3.1.6.13.8.1.9	Counter32	read-only	This object returns the number of control channel octets received. NOTE : This is not currently supported. It will just return zero. [Alan 10/12/2000]
C32 csOrionL2tpStatsControlRecvPackets	1.3.6.1.4.1.3085.3.1.6.13.8.1.10	Counter32	read-only	This object returns the number of control packets received.
C32 csOrionL2tpStatsControlSendOctets	1.3.6.1.4.1.3085.3.1.6.13.8.1.11	Counter32	read-only	This object returns the number of control channel octets that were transmitted to tunnel endpoints. NOTE : This is not currently supported. It will just return zero. [Alan 10/12/2000]
C32 csOrionL2tpStatsControlSendPackets	1.3.6.1.4.1.3085.3.1.6.13.8.1.12	Counter32	read-only	This object returns the number of control packets that were transmitted to tunnel endpoints.
INT csOrionL2tpStatsDrainingTunnels	1.3.6.1.4.1.3085.3.1.6.13.8.1.8	INTEGER	read-only	This object indicates if this L2TP is draining off sessions from all tunnels. This object will return no(2) when the domain is not draining sessions or after the last L2TP session has disconnected when the domain is in the draining state.
csOrionL2tpStatsEntry	1.3.6.1.4.1.3085.3.1.6.13.8.1		not-accessible	An L2TP Stats entry. An entry in this table may correspond to a single endpoint or a group of tunnel endpoints.
C32 csOrionL2tpStatsFailedAuthentications	1.3.6.1.4.1.3085.3.1.6.13.8.1.3	Counter32	read-only	This object returns the number of failed tunnel connection attempts because the tunnel peer failed authentication.
C32 csOrionL2tpStatsFailedSessions	1.3.6.1.4.1.3085.3.1.6.13.8.1.6	Counter32	read-only	This object returns the number of sessions that failed to reach the established state.
C32 csOrionL2tpStatsFailedTunnels	1.3.6.1.4.1.3085.3.1.6.13.8.1.2	Counter32	read-only	This object returns the number of tunnels that failed to reach the established state.
C32 csOrionL2tpStatsPayloadRecvDiscards	1.3.6.1.4.1.3085.3.1.6.13.8.1.15	Counter32	read-only	This object returns the number of received payload packets that were discarded.
C32 csOrionL2tpStatsPayloadRecvOctets	1.3.6.1.4.1.3085.3.1.6.13.8.1.13	Counter32	read-only	This object returns the number of payload channel octets that were received.
C32 csOrionL2tpStatsPayloadRecvPackets	1.3.6.1.4.1.3085.3.1.6.13.8.1.14	Counter32	read-only	This object returns the number of payload packets that were received.
C32 csOrionL2tpStatsPayloadSendOctets	1.3.6.1.4.1.3085.3.1.6.13.8.1.16	Counter32	read-only	This object returns the number of payload channel octets that were transmitted to tunnel peers. NOTE : This is not currently supported. It will just return zero. [Alan 10/12/2000]
C32 csOrionL2tpStatsPayloadSendPackets	1.3.6.1.4.1.3085.3.1.6.13.8.1.17	Counter32	read-only	This object returns the number of payload packets that were transmitted to tunnel peers.
csOrionL2tpStatsTable	1.3.6.1.4.1.3085.3.1.6.13.8		not-accessible	The L2TP Status and Statistics table.
C32 csOrionL2tpStatsTotalSessions	1.3.6.1.4.1.3085.3.1.6.13.8.1.5	Counter32	read-only	This object returns the total number of sessions that have successfully reached the established state.
C32 csOrionL2tpStatsTotalTunnels	1.3.6.1.4.1.3085.3.1.6.13.8.1.1	Counter32	read-only	This object returns the total number of tunnels that have successfully reached the established state.
I32 csOrionL2tpTunnelActiveSessionsCount	1.3.6.1.4.1.3085.3.1.6.13.2.1.15	Integer32	read-only	This is the number of sessions that are currently present within this tunnel
INT csOrionL2tpTunnelAuthentication	1.3.6.1.4.1.3085.3.1.6.13.2.1.3	INTEGER	read-only	This object controls the tunnel authentication. If set to Enable, a challenge will be sent to the peer during tunnel creation. The tunnel will be torn down if the peer does not send a valid response. Regardless of the setting, if the peer sends a challenge during tunnel creation, a response will be sent.
I32 csOrionL2tpTunnelEmptyTunnelTimeout	1.3.6.1.4.1.3085.3.1.6.13.2.1.8	Integer32	read-only	This object controls the time interval in seconds after which an alive but empty tunnel (i.e. a tunnel without sessions) will be torn down. The value 0 indicates that the empty tunnel will continue to exist until either the peer stops responding or the the tunnel is torn down by peer or the administrator.
csOrionL2tpTunnelEntry	1.3.6.1.4.1.3085.3.1.6.13.2.1		not-accessible	Each entry represents a single L2TP tunnel established with a peer.
I32 csOrionL2tpTunnelHelloInterval	1.3.6.1.4.1.3085.3.1.6.13.2.1.4	Integer32	read-only	This object defines the interval (in seconds) in which HELLO (or keep-alive) packets are to be sent to the tunnel peer. The value 0 indicates that sending of HELLO packets is disabled
I32 csOrionL2tpTunnelLocalId	1.3.6.1.4.1.3085.3.1.6.13.2.1.1	Integer32	not-accessible	Each tunnel is assigned a random locally unique identifier when the tunnel is created. The tunnel identifier can be used as an index for the tunnel table.
I32 csOrionL2tpTunnelMaxRetransmissions	1.3.6.1.4.1.3085.3.1.6.13.2.1.5	Integer32	read-only	This object defines the number of retransmission's which the tunnel will attempt before assuming that the peer is no longer responding.
I32 csOrionL2tpTunnelMaxRetransmissionTimeout	1.3.6.1.4.1.3085.3.1.6.13.2.1.6	Integer32	read-only	This object defines the maximum retransmission timeout interval in seconds which the tunnel will wait before retransmitting a control packet that has not been acknowledged.
I32 csOrionL2tpTunnelMaxSessions	1.3.6.1.4.1.3085.3.1.6.13.2.1.2	Integer32	read-only	This object defines the maximum sessions that can be established in this tunnel. NOTE : Not used at this time.
STR csOrionL2tpTunnelRemoteHostname	1.3.6.1.4.1.3085.3.1.6.13.2.1.14	DisplayString	read-only	This is the name that the peer used to identify itself during tunnel creation
IP csOrionL2tpTunnelRemoteIpAddress	1.3.6.1.4.1.3085.3.1.6.13.2.1.10	IpAddress	read-only	This index identifies the IP Address of the peer.
I32 csOrionL2tpTunnelRemoteRWS	1.3.6.1.4.1.3085.3.1.6.13.2.1.13	Integer32	read-only	This is the control receive window size advertised by the peer during tunnel creation. It specifies the number of control packets that can be sent to the peer without waiting for an acknowledgement.
I32 csOrionL2tpTunnelRemoteTunnelId	1.3.6.1.4.1.3085.3.1.6.13.2.1.11	Integer32	read-only	This object is the identifier assigned to the tunnel by the peer. This identifier is unique only for a given peer.
I32 csOrionL2tpTunnelRemoteUdpPort	1.3.6.1.4.1.3085.3.1.6.13.2.1.12	Integer32	read-only	This object identifies the UDP port that the peer is using for communication.
I32 csOrionL2tpTunnelRWS	1.3.6.1.4.1.3085.3.1.6.13.2.1.7	Integer32	read-only	This object defines the control channel receive window size. It specifies the maximum number of packets the tunnel peer can send without waiting for an acknowledgement from this peer.
G32 csOrionL2tpTunnelStatsActiveSessions	1.3.6.1.4.1.3085.3.1.6.13.9.1.4	Gauge32	read-only	This object contains the total number of sessions in the established state for this tunnel. NOTE : This is not currently supported. It will just return zero. [Alan 10/12/2000]
csOrionL2tpTunnelStatsEntry	1.3.6.1.4.1.3085.3.1.6.13.9.1		not-accessible	An L2TP tunnel interface stats entry.
C32 csOrionL2tpTunnelStatsFailedSessions	1.3.6.1.4.1.3085.3.1.6.13.9.1.3	Counter32	read-only	This object contains the total number of sessions that were initiated but failed to reach the established phase. NOTE : This is not currently supported. It will just return zero. [Alan 10/12/2000]
INT csOrionL2tpTunnelStatsState	1.3.6.1.4.1.3085.3.1.6.13.9.1.1	INTEGER	read-only	This field contains the current state of the control tunnel.
csOrionL2tpTunnelStatsTable	1.3.6.1.4.1.3085.3.1.6.13.9		not-accessible	The L2TP tunnel status and statistics table.
C32 csOrionL2tpTunnelStatsTotalSessions	1.3.6.1.4.1.3085.3.1.6.13.9.1.2	Counter32	read-only	This object contains the total number of sessions that this tunnel has successfully connected through to its tunnel peer since this tunnel was created.
ROW csOrionL2tpTunnelStatus	1.3.6.1.4.1.3085.3.1.6.13.2.1.16	RowStatus	read-write	The row status for this table. Used only for deleting this tunnel. IMPORTANT: (1) entries on this table are created when a tunnel is established by the peer. Therefore, creation of entry thru SNMP SET request is not allowed. (2) tunnel is usually torn down by the peer.
csOrionL2tpTunnelTable	1.3.6.1.4.1.3085.3.1.6.13.2		not-accessible	The entries in this table are the L2TP tunnels that have been established with various peers.
I32 csOrionL2tpTunnelUpTime	1.3.6.1.4.1.3085.3.1.6.13.2.1.9	Integer32	read-only	This object indicates the number of seconds this tunnel has been up since it was established.
INT csOrionLacConfigAdminStatus	1.3.6.1.4.1.3085.3.1.6.13.5.1.1	INTEGER	read-write	Setting this object to 'disable' causes all tunnels to be immediately disconnected and no further tunnels to be either initiated or accepted. Setting this object to 'drain' will prevent any new tunnels and/or sessions to be either initiated or accepted but does NOT disconnect any active tunnels/sessions.
csOrionLacConfigEntry	1.3.6.1.4.1.3085.3.1.6.13.5.1		not-accessible	Each entry represents a single LAC object for a Virtual Router. There is only one instance of LAC on a Virtual Router. This object is created along with an L2TP object when a VR is created.
csOrionLacConfigTable	1.3.6.1.4.1.3085.3.1.6.13.5		not-accessible	This table contains general L2TP Network Server (LNS) configuration parameters.
INT csOrionLnsConfigAdminStatus	1.3.6.1.4.1.3085.3.1.6.13.4.1.1	INTEGER	read-write	Setting this object to 'disable' causes all tunnels to be immediately disconnected and no further tunnels to be either initiated or accepted. Setting this object to 'drain' will prevent any new tunnels and/or sessions to be either initiated or accepted but does NOT disconnect any active tunnels/sessions.
csOrionLnsConfigEntry	1.3.6.1.4.1.3085.3.1.6.13.4.1		not-accessible	Each entry represents a single LNS object for a Virtual Router. There is only one instance of LNS on a Virtual Router. This object is created along with an L2TP object when a VR is created.
csOrionLnsConfigTable	1.3.6.1.4.1.3085.3.1.6.13.4		not-accessible	This table contains general L2TP Network Server (LNS) configuration parameters.
csOrionLogin	1.3.6.1.4.1.3085.3.1.2.3
I32 csOrionLogLinkChannelIndex	1.3.6.1.4.1.3085.3.1.4.3.6	Integer32	read-only	For Logical Link up/down traps, this identifies the channel index (relative to the slot/port index) of the Logical Link. If there is no channel, this object has the value -1.
NTF csOrionLogLinkDown	1.3.6.1.4.1.3085.3.1.1.1.8			This trap indicates that a Logical Link on the Orion is about to enter the down state.
I32 csOrionLogLinkModuleIndex	1.3.6.1.4.1.3085.3.1.4.3.18	Integer32	read-only	For Logical Link up/down traps, this identifies the module index (relative to the slot index) of the Logical Link.
I32 csOrionLogLinkPortIndex	1.3.6.1.4.1.3085.3.1.4.3.5	Integer32	read-only	For Logical Link up/down traps, this identifies the port index (relative to the slot index) of the Logical Link.
I32 csOrionLogLinkSlotIndex	1.3.6.1.4.1.3085.3.1.4.3.4	Integer32	read-only	For Logical Link up/down traps, this identifies the slot index of the Logical Link.
I32 csOrionLogLinkSubIfIndex	1.3.6.1.4.1.3085.3.1.4.3.7	Integer32	read-only	For Logical Link up/down traps, this identifies the sub interface index (relative to the slot/port[:chan] index) of the Logical Link. If there is no sub interface, this object has the value -1.
NTF csOrionLogLinkUp	1.3.6.1.4.1.3085.3.1.1.1.9			This trap indicates that a Logical Link on the Orion is about to enter the up state.
NTF csOrionLossOfClock	1.3.6.1.4.1.3085.3.1.1.1.39			A csOrionLossOfClock trap signifies that a physical port on a blade experiencing loss of Clock(LOC) on the line. Applicable to both DS3 and OC3.
NTF csOrionLossOfFrame	1.3.6.1.4.1.3085.3.1.1.1.37			A csOrionLossOfFrame trap signifies that a physical port on a blade experiencing loss of Frame(LOF) on the line. Applicable to both DS3 and OC3.
NTF csOrionLossOfSignal	1.3.6.1.4.1.3085.3.1.1.1.36			A csOrionLossOfSignal trap signifies that a physical port on a blade experiencing loss of signal(LOS) on the line. Applicable to both DS3 and E3.
csOrionManualCryptoMapEntry	1.3.6.1.4.1.3085.3.1.6.5.3.1		not-accessible	Each entry contains a specific set of Manual Crypto Map for use by a Security Association.
OCT csOrionManualCryptoMapInboundAHKey	1.3.6.1.4.1.3085.3.1.6.5.3.1.6	OCTET STRING	read-create	An inbound AH key used by this Manual Crypto Map.
I32 csOrionManualCryptoMapInboundAHSPI	1.3.6.1.4.1.3085.3.1.6.5.3.1.7	Integer32	read-create	An inbound AH SPI used by this Manual Crypto Map.
OCT csOrionManualCryptoMapInboundESPAuthKey	1.3.6.1.4.1.3085.3.1.6.5.3.1.12	OCTET STRING	read-create	An inbound ESP authentication key used by this Manual Crypto Map.
OCT csOrionManualCryptoMapInboundESPKey	1.3.6.1.4.1.3085.3.1.6.5.3.1.10	OCTET STRING	read-create	An inbound ESP key used by this Manual Crypto Map.
I32 csOrionManualCryptoMapInboundESPSPI	1.3.6.1.4.1.3085.3.1.6.5.3.1.11	Integer32	read-create	An inbound ESP SPI used by this Manual Crypto Map.
I32 csOrionManualCryptoMapMatchAddress	1.3.6.1.4.1.3085.3.1.6.5.3.1.3	Integer32	read-create	Access List ID used by this Manual Crypto Map.
STR csOrionManualCryptoMapName	1.3.6.1.4.1.3085.3.1.6.5.3.1.1	DisplayString	not-accessible	An index for the Manual Crypto Map Table.
I32 csOrionManualCryptoMapNumber	1.3.6.1.4.1.3085.3.1.6.5.3.1.2	Integer32	not-accessible	An index for the Manual Crypto Map Table.
OCT csOrionManualCryptoMapOutboundAHKey	1.3.6.1.4.1.3085.3.1.6.5.3.1.8	OCTET STRING	read-create	An outbound AH key used by this Manual Crypto Map.
I32 csOrionManualCryptoMapOutboundAHSPI	1.3.6.1.4.1.3085.3.1.6.5.3.1.9	Integer32	read-create	An outbound AH SPI used by this Manual Crypto Map.
OCT csOrionManualCryptoMapOutboundESPAuthKey	1.3.6.1.4.1.3085.3.1.6.5.3.1.15	OCTET STRING	read-create	An outbound ESP authentication key used by this Manual Crypto Map.
OCT csOrionManualCryptoMapOutboundESPKey	1.3.6.1.4.1.3085.3.1.6.5.3.1.13	OCTET STRING	read-create	An outbound ESP key used by this Manual Crypto Map.
I32 csOrionManualCryptoMapOutboundESPSPI	1.3.6.1.4.1.3085.3.1.6.5.3.1.14	Integer32	read-create	An outbound ESP SPI used by this Manual Crypto Map.
ROW csOrionManualCryptoMapStatus	1.3.6.1.4.1.3085.3.1.6.5.3.1.16	RowStatus	read-create	A row status type for the Manual Crypto Map.
csOrionManualCryptoMapTable	1.3.6.1.4.1.3085.3.1.6.5.3		not-accessible	A table for Manual Crypto Map.
STR csOrionManualCryptoMapTransformSet	1.3.6.1.4.1.3085.3.1.6.5.3.1.5	DisplayString	read-create	A transform set used by this Manual Crypto Map.
csOrionMeter	1.3.6.1.4.1.3085.3.1.6.22
I32 csOrionMeterEnd	1.3.6.1.4.1.3085.3.1.6.22.5	Integer32	read-only	End of this group. value undefined
I32 csOrionMlpppBundleActiveLinks	1.3.6.1.4.1.3085.3.1.6.16.1.1.13	Integer32	read-only	The number of active links in this bundle.
INT csOrionMlpppBundleAdminStatus	1.3.6.1.4.1.3085.3.1.6.16.1.1.10	INTEGER	read-create	The desired state of the bundle.
C32 csOrionMlpppBundleBytesReceived	1.3.6.1.4.1.3085.3.1.6.16.1.1.17	Counter32	read-only	The number of bytes received on this bundle.
C32 csOrionMlpppBundleBytesSent	1.3.6.1.4.1.3085.3.1.6.16.1.1.16	Counter32	read-only	The number of bytes sent on this bundle.
csOrionMlpppBundleEntry	1.3.6.1.4.1.3085.3.1.6.16.1.1		not-accessible	Each entry represents a PPP multilink bundle.
INT csOrionMlpppBundleEventLogLevel	1.3.6.1.4.1.3085.3.1.6.16.1.1.9	INTEGER	read-create	The desired level of event logging for this bundle.
I32 csOrionMlpppBundleFragmentsPerPacket	1.3.6.1.4.1.3085.3.1.6.16.1.1.5	Integer32	read-only	The number of fragments per packet.
I32 csOrionMlpppBundleIndex	1.3.6.1.4.1.3085.3.1.6.16.1.1.2	Integer32	not-accessible	The index associated with this PPP multilink bundle.
I32 csOrionMlpppBundleMaxLinks	1.3.6.1.4.1.3085.3.1.6.16.1.1.3	Integer32	read-create	The maximum number of links that can be configured to be part of this PPP multilink bundle.
OPE csOrionMlpppBundleOperStatus	1.3.6.1.4.1.3085.3.1.6.16.1.1.11	OperStatus	read-only	The actual of the bundle.
C32 csOrionMlpppBundlePacketsReceived	1.3.6.1.4.1.3085.3.1.6.16.1.1.15	Counter32	read-only	The number of packets received on this bundle.
C32 csOrionMlpppBundlePacketsSent	1.3.6.1.4.1.3085.3.1.6.16.1.1.14	Counter32	read-only	The number of packets sent on this bundle.
I32 csOrionMlpppBundleQueueSize	1.3.6.1.4.1.3085.3.1.6.16.1.1.4	Integer32	read-create	The maximum size of this bundle's re-sequencing queue.
I32 csOrionMlpppBundleReorderTimeout	1.3.6.1.4.1.3085.3.1.6.16.1.1.6	Integer32	read-create	The configured reorder timeout value for this bundle, expressed in milliseconds.
ROW csOrionMlpppBundleRowStatus	1.3.6.1.4.1.3085.3.1.6.16.1.1.12	RowStatus	read-create	This object is used to create and delete PPP multilink bundles.
I32 csOrionMlpppBundleRxMRRU	1.3.6.1.4.1.3085.3.1.6.16.1.1.8	Integer32	read-only	The maximum receive reconstructed unit in the receive direction.
STR csOrionMlpppBundleSiteName	1.3.6.1.4.1.3085.3.1.6.16.1.1.18	DisplayString	read-create	A textual string containing the site name of this Mlppp Bundle interface.
I32 csOrionMlpppBundleSlot	1.3.6.1.4.1.3085.3.1.6.16.1.1.1	Integer32	not-accessible	The slot on which this bundle is to be created. This value must be specified at creation and, henceforth, cannot be changed.
csOrionMlpppBundleTable	1.3.6.1.4.1.3085.3.1.6.16.1		not-accessible	This table contains information about PPP multilink bundles.
I32 csOrionMlpppBundleTxMRRU	1.3.6.1.4.1.3085.3.1.6.16.1.1.7	Integer32	read-only	The maximum receive reconstructed unit in the transmit direction.
csOrionMlpppInfo	1.3.6.1.4.1.3085.3.1.6.16
I32 csOrionMlpppInfoEnd	1.3.6.1.4.1.3085.3.1.6.16.3	Integer32	read-only	End of this group. value undefined
I32 csOrionMlpppLinkChannelIndex	1.3.6.1.4.1.3085.3.1.6.16.2.1.3	Integer32	not-accessible	Channel number of this link.
csOrionMlpppLinkEntry	1.3.6.1.4.1.3085.3.1.6.16.2.1		not-accessible	Each entry represents a PPP multilink link.
I32 csOrionMlpppLinkPortIndex	1.3.6.1.4.1.3085.3.1.6.16.2.1.2	Integer32	not-accessible	The port of this PPP multilink link.
ROW csOrionMlpppLinkRowStatus	1.3.6.1.4.1.3085.3.1.6.16.2.1.5	RowStatus	read-create	This object is used to add and remove PPP multilink links from a bundle.
I32 csOrionMlpppLinkSlotIndex	1.3.6.1.4.1.3085.3.1.6.16.2.1.1	Integer32	not-accessible	The slot of this PPP multilink link.
I32 csOrionMlpppLinkSubIfIndex	1.3.6.1.4.1.3085.3.1.6.16.2.1.4	Integer32	not-accessible	The sub-interface number of this link.
csOrionMlpppLinkTable	1.3.6.1.4.1.3085.3.1.6.16.2		not-accessible	This table contains information about PPP multilink links.
csOrionModem	1.3.6.1.4.1.3085.3.1.2.4
I32 csOrionModemBaud	1.3.6.1.4.1.3085.3.1.2.4.2	Integer32	read-write	This object sets the target baud rate of the modem connection.
I32 csOrionModemConnectWait	1.3.6.1.4.1.3085.3.1.2.4.4	Integer32	read-write	This object sets the length of time, in seconds, the modem will wait for a connection.
INT csOrionModemControl	1.3.6.1.4.1.3085.3.1.2.4.1	INTEGER	read-write	This object controls access to this device via Dial In modem.
INT csOrionModemFlowCtl	1.3.6.1.4.1.3085.3.1.2.4.3	INTEGER	read-write	This object specifies the type of flow control used by the modem.
I32 csOrionModuleIndex	1.3.6.1.4.1.3085.3.1.4.3.19	Integer32	read-only	For Logical Link up/down traps, this identifies the module index (relative to the slot index) of the Logical Link.
csOrionMpls	1.3.6.1.4.1.3085.3.1.4.2.10
I32 csOrionMplsEnd	1.3.6.1.4.1.3085.3.1.4.2.10.4	Integer32	read-only	End of this group. value undefined
INT csOrionNatClearTrans	1.3.6.1.4.1.3085.3.1.6.4.6.1.5	INTEGER	read-write	Setting this flag to clear will cause all entries in the translation table to be removed.
csOrionNatGeneralParamEntry	1.3.6.1.4.1.3085.3.1.6.4.6.1		not-accessible	This table contains the NAT generic configuration parameters
csOrionNatGeneralParamTable	1.3.6.1.4.1.3085.3.1.6.4.6		not-accessible	Table for common NAT attributes.
I32 csOrionNatGeneralParamTableEnd	1.3.6.1.4.1.3085.3.1.6.4.7	Integer32	read-only	End of this group. value undefined
I32 csOrionNatGenTimeout	1.3.6.1.4.1.3085.3.1.6.4.6.1.1	Integer32	read-write	The NAT translation entry global timeout. The global timeout setting will be used by protocols that don't have their own inactivity timeout configurable. Default value is 15 minutes. Minimum is 5 minutes. Maximum is 1 year.
I32 csOrionNatIcmpTimeout	1.3.6.1.4.1.3085.3.1.6.4.6.1.4	Integer32	read-write	The inactivity timeout for entries from ICMP traffic in the translation table. Default value is 15 minutes. Minimum is 5 minutes. Maximum is 1 year.
csOrionNatInfo	1.3.6.1.4.1.3085.3.1.6.4
I32 csOrionNatInfoEnd	1.3.6.1.4.1.3085.3.1.6.4.5	Integer32	read-only	End of this group. value undefined
IP csOrionNatInsideGlobalAddr	1.3.6.1.4.1.3085.3.1.6.4.2.1.6	IpAddress	read-only
I32 csOrionNatInsideGlobalPort	1.3.6.1.4.1.3085.3.1.6.4.2.1.7	Integer32	read-only
IP csOrionNatInsideLocalAddr	1.3.6.1.4.1.3085.3.1.6.4.2.1.1	IpAddress	not-accessible
I32 csOrionNatInsideLocalPort	1.3.6.1.4.1.3085.3.1.6.4.2.1.2	Integer32	not-accessible
IP csOrionNatOutsideGlobalAddr	1.3.6.1.4.1.3085.3.1.6.4.2.1.3	IpAddress	not-accessible
I32 csOrionNatOutsideGlobalPort	1.3.6.1.4.1.3085.3.1.6.4.2.1.4	Integer32	not-accessible
IP csOrionNatPoolEndAddress	1.3.6.1.4.1.3085.3.1.6.4.1.1.3	IpAddress	read-create
I32 csOrionNatPoolEndPort	1.3.6.1.4.1.3085.3.1.6.4.1.1.5	Integer32	read-create
csOrionNatPoolEntry	1.3.6.1.4.1.3085.3.1.6.4.1.1		not-accessible	An entry containing filtering information used to classify packets.
I32 csOrionNatPoolId	1.3.6.1.4.1.3085.3.1.6.4.1.1.1	Integer32	not-accessible	An identifier for this Nat Pool Entry.
IP csOrionNatPoolStartAddress	1.3.6.1.4.1.3085.3.1.6.4.1.1.2	IpAddress	read-create
I32 csOrionNatPoolStartPort	1.3.6.1.4.1.3085.3.1.6.4.1.1.4	Integer32	read-create
ROW csOrionNatPoolStatus	1.3.6.1.4.1.3085.3.1.6.4.1.1.6	RowStatus	read-create
csOrionNatPoolTable	1.3.6.1.4.1.3085.3.1.6.4.1		not-accessible	A list of Access List Entries.
I32 csOrionNatProtocol	1.3.6.1.4.1.3085.3.1.6.4.2.1.5	Integer32	not-accessible
I32 csOrionNatStaticIfIndex	1.3.6.1.4.1.3085.3.1.6.4.4.1.1	Integer32	not-accessible	The VI where to apply the static NAT translation.
IP csOrionNatStaticInsideGlobalAddress	1.3.6.1.4.1.3085.3.1.6.4.3.1.2	IpAddress	read-create	The address as know in the outside world.
IP csOrionNatStaticInsideLocalAddress	1.3.6.1.4.1.3085.3.1.6.4.3.1.1	IpAddress	not-accessible	An identifier for this Nat Pool Entry. The address as known in the private network.
IP csOrionNatStaticNetmask	1.3.6.1.4.1.3085.3.1.6.4.3.1.4	IpAddress	read-create	The network mask. For one-to-one static NAT translation, mask should be zero.
csOrionNatStaticTranslationEntry	1.3.6.1.4.1.3085.3.1.6.4.3.1		not-accessible
ROW csOrionNatStaticTranslationStatus	1.3.6.1.4.1.3085.3.1.6.4.3.1.3	RowStatus	read-create
csOrionNatStaticTranslationTable	1.3.6.1.4.1.3085.3.1.6.4.3		not-accessible
INT csOrionNatStaticTranslationType	1.3.6.1.4.1.3085.3.1.6.4.3.1.5	INTEGER	read-create	Source address translation will be for outgoing packets and destination address translation will be for incoming packets.
IP csOrionNatStaticVIInsideGlobalAddress	1.3.6.1.4.1.3085.3.1.6.4.4.1.3	IpAddress	read-create	The address as know in the outside world.
IP csOrionNatStaticVIInsideLocalAddress	1.3.6.1.4.1.3085.3.1.6.4.4.1.2	IpAddress	not-accessible	An identifier for this Nat Pool Entry. The address as known in the private network.
IP csOrionNatStaticVINetmask	1.3.6.1.4.1.3085.3.1.6.4.4.1.4	IpAddress	read-create	The network mask. For one-to-one static NAT translation, mask should be zero.
csOrionNatStaticVITranslationEntry	1.3.6.1.4.1.3085.3.1.6.4.4.1		not-accessible
ROW csOrionNatStaticVITranslationStatus	1.3.6.1.4.1.3085.3.1.6.4.4.1.6	RowStatus	read-create
csOrionNatStaticVITranslationTable	1.3.6.1.4.1.3085.3.1.6.4.4		not-accessible
INT csOrionNatStaticVITranslationType	1.3.6.1.4.1.3085.3.1.6.4.4.1.5	INTEGER	read-create	Source address translation will be for outgoing packets and destination address translation will be for incoming packets.
I32 csOrionNatTcpTimeout	1.3.6.1.4.1.3085.3.1.6.4.6.1.2	Integer32	read-write	The inactivity timeout for entries from TCP traffic in the translation table. Default value is 15 minutes. Minimum is 5 minutes. Maximum is 1 year.
csOrionNatTranslationEntry	1.3.6.1.4.1.3085.3.1.6.4.2.1		not-accessible	An entry containing IP address, port and the protocol information corresponding to a session.
csOrionNatTranslationTable	1.3.6.1.4.1.3085.3.1.6.4.2		not-accessible	This contains the NAT translation entries.
I32 csOrionNatUdpTimeout	1.3.6.1.4.1.3085.3.1.6.4.6.1.3	Integer32	read-write	The inactivity timeout for entries from UDP traffic in the translation table. Default value is 15 minutes. Minimum is 5 minutes. Maximum is 1 year.
csOrionNBNSInfo	1.3.6.1.4.1.3085.3.1.6.19
I32 csOrionNBNSInfoEnd	1.3.6.1.4.1.3085.3.1.6.19.2	Integer32	read-only	End of this group. value undefined
I32 csOrionNumConfigChanges	1.3.6.1.4.1.3085.3.1.4.3.8	Integer32	read-only	Number of changed objects for which the csOrionConfigChange Trap PDU generated. This identifies the number of VarBinds follows this object in the csOrionConfigChange Trap PDU.
csOrionNumericListEntry	1.3.6.1.4.1.3085.3.1.6.1.6.1		not-accessible	Each entry specifies a single numeric specification: a discreet integer or a range of contiguous integers.
STR csOrionNumericListName	1.3.6.1.4.1.3085.3.1.6.1.6.1.2	DisplayString	not-accessible	The name of the numeric-list. A name shall contain only alphanumeric characters and hyphens (-).
ROW csOrionNumericListRowStatus	1.3.6.1.4.1.3085.3.1.6.1.6.1.5	RowStatus	read-create	The RowStatus object for this table. This is used to add/delete rows from this table.
csOrionNumericListTable	1.3.6.1.4.1.3085.3.1.6.1.6		not-accessible	This table stores named lists of integers. A numeric-list is a named list that includes discreet integers or integer ranges. A numeric-list is typed: Initally a single type has been identified for using numeric-lists to represent port-lists.
INT csOrionNumericListType	1.3.6.1.4.1.3085.3.1.6.1.6.1.1	INTEGER	not-accessible	The match type for this entry: port: this numeric list represents a list of ports.
I32 csOrionNumericListUpperLimit	1.3.6.1.4.1.3085.3.1.6.1.6.1.4	Integer32	not-accessible	The integer representing the upper boundary of a range. This attribute shall only be used when `includeRange'is specified in the csOrionNumericListMatchType attribute.
I32 csOrionNumericListValue	1.3.6.1.4.1.3085.3.1.6.1.6.1.3	Integer32	not-accessible	The integer for this entry. This value shall always be used.
NTF csOrionOc3Alarm	1.3.6.1.4.1.3085.3.1.1.1.43			A csOrionOc3Alarm trap signifies that an OC3 physical port on a blade, which had sent an alarm.
NTF csOrionOc3AlarmClear	1.3.6.1.4.1.3085.3.1.1.1.44			A csOrionOc3AlarmClear trap signifies that an OC3 physical port on a blade, which had sent an alarm earlier, indicates that the prvious alarm is cleared.
INT csOrionOc3AlarmType	1.3.6.1.4.1.3085.3.1.4.3.15	INTEGER	read-only	For port level alarms related OC3 traps, this identifies the type of alarm being sent out.
csOrionOc3AtmStats	1.3.6.1.4.1.3085.3.1.3.3.8
csOrionOc3Config	1.3.6.1.4.1.3085.3.1.3.3.1
csOrionOc3FarEndLine	1.3.6.1.4.1.3085.3.1.3.3.4
csOrionOc3FarEndPath	1.3.6.1.4.1.3085.3.1.3.3.6
csOrionOc3Info	1.3.6.1.4.1.3085.3.1.3.3
csOrionOc3Line	1.3.6.1.4.1.3085.3.1.3.3.3
csOrionOc3Path	1.3.6.1.4.1.3085.3.1.3.3.5
csOrionOc3PosStats	1.3.6.1.4.1.3085.3.1.3.3.7
I32 csOrionOc3PosStatsEnd	1.3.6.1.4.1.3085.3.1.3.3.7.2	Integer32	read-only	End of this group. value undefined
csOrionOc3Section	1.3.6.1.4.1.3085.3.1.3.3.2
csOrionOspf	1.3.6.1.4.1.3085.3.1.4.2.4
I32 csOrionOspfEnd	1.3.6.1.4.1.3085.3.1.4.2.4.3	Integer32	read-only	End of this group. value undefined
NTF csOrionOspfIfAuthFailure	1.3.6.1.4.1.3085.3.1.1.1.18			An csOspfIfAuthFailure trap signifies that a packet has been received on a non-virtual in- terface from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type.
NTF csOrionOspfIfConfigError	1.3.6.1.4.1.3085.3.1.1.1.16			An csOspfIfConfigError trap signifies that a packet has been received on a non-virtual in- terface from a router whose configuration parameters conflict with this router's confi- guration parameters. Note that the event op- tionMismatch should cause a trap only if it prevents an adjacency from forming.
NTF csOrionOspfIfRxBadPacket	1.3.6.1.4.1.3085.3.1.1.1.20			An csOspfIfRxBadPacket trap signifies that an OSPF packet has been received on a non-virtual interface that cannot be parsed.
NTF csOrionOspfIfStateChange	1.3.6.1.4.1.3085.3.1.1.1.12			An csOspfIfStateChange trap signifies that there has been a change in the state of a non-virtual OSPF interface. This trap should be generated when the interface state regresses (e.g., goes from Dr to Down) or progresses to a terminal state (i.e., Point-to-Point, DR Other, Dr, or Backup).
NTF csOrionOspfLsdbApproachingOverflow	1.3.6.1.4.1.3085.3.1.1.1.27			An csOspfLsdbApproachingOverflow trap signifies that the number of LSAs in the router's link- state database has exceeded ninety percent of csOspfExtLsdbLimit.
NTF csOrionOspfLsdbOverflow	1.3.6.1.4.1.3085.3.1.1.1.26			An csOspfLsdbOverflow trap signifies that the number of LSAs in the router's link-state data- base has exceeded csOspfExtLsdbLimit.
NTF csOrionOspfMaxAgeLsa	1.3.6.1.4.1.3085.3.1.1.1.25			An csOspfMaxAgeLsa trap signifies that one of the LSA in the router's link-state database has aged to MaxAge.
NTF csOrionOspfNbrStateChange	1.3.6.1.4.1.3085.3.1.1.1.14			A csOspfNbrStateChange trap signifies that there has been a change in the state of a non- virtual OSPF neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., 2-Way or Full). When an neighbor transitions from or to Full on non-broadcast multi-access and broadcast networks, the trap should be gen- erated by the designated router. A designated router transitioning to Down will be noted by csOspfIfStateChange.
NTF csOrionOspfOriginateLsa	1.3.6.1.4.1.3085.3.1.1.1.24			An csOspfOriginateLsa trap signifies that a new LSA has been originated by this router. This trap should not be invoked for simple refreshes of LSAs (which happesn every 30 minutes), but instead will only be invoked when an LSA is (re)originated due to a topology change. Addi- tionally, this trap does not include LSAs that are being flushed because they have reached MaxAge.
NTF csOrionOspfTxRetransmit	1.3.6.1.4.1.3085.3.1.1.1.22			An csOspfTxRetransmit trap signifies than an OSPF packet has been retransmitted on a non- virtual interface. All packets that may be re- transmitted are associated with an LSDB entry. The LS type, LS ID, and Router ID are used to identify the LSDB entry.
NTF csOrionOspfVirtIfAuthFailure	1.3.6.1.4.1.3085.3.1.1.1.19			An csOspfVirtIfAuthFailure trap signifies that a packet has been received on a virtual interface from a router whose authentication key or au- thentication type conflicts with this router's authentication key or authentication type.
NTF csOrionOspfVirtIfConfigError	1.3.6.1.4.1.3085.3.1.1.1.17			An csOspfConfigError trap signifies that a pack- et has been received on a virtual interface from a router whose configuration parameters conflict with this router's configuration parameters. Note that the event optionMismatch should cause a trap only if it prevents an ad- jacency from forming.
NTF csOrionOspfVirtIfRxBadPacket	1.3.6.1.4.1.3085.3.1.1.1.21			An csOspfRxBadPacket trap signifies that an OSPF packet has been received on a virtual interface that cannot be parsed.
NTF csOrionOspfVirtIfStateChange	1.3.6.1.4.1.3085.3.1.1.1.13			A csOspfIfStateChange trap signifies that there has been a change in the state of an OSPF vir- tual interface. This trap should be generated when the inter- face state regresses (e.g., goes from Point- to-Point to Down) or progresses to a terminal state (i.e., Point-to-Point).
NTF csOrionOspfVirtIfTxRetransmit	1.3.6.1.4.1.3085.3.1.1.1.23			An csOspfTxRetransmit trap signifies than an OSPF packet has been retransmitted on a virtual interface. All packets that may be retransmit- ted are associated with an LSDB entry. The LS type, LS ID, and Router ID are used to identify the LSDB entry.
NTF csOrionOspfVirtNbrStateChange	1.3.6.1.4.1.3085.3.1.1.1.15			An csOspfIfStateChange trap signifies that there has been a change in the state of an OSPF vir- tual neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., Full).
I32 csOrionPacketRingPrimToProtCurrentEndpointSlot	1.3.6.1.4.1.3085.3.1.13.8	Integer32	accessible-for-notify	Current slot number of the primary-to-protection endpoint.
I32 csOrionPacketRingPrimToProtPreviousEndpointSlot	1.3.6.1.4.1.3085.3.1.13.9	Integer32	accessible-for-notify	Previous slot number of the primary-to-protection endpoint.
I32 csOrionPacketRingProtToPrimCurrentEndpointSlot	1.3.6.1.4.1.3085.3.1.13.10	Integer32	accessible-for-notify	Current slot number of the protection-to-primary endpoint.
I32 csOrionPacketRingProtToPrimPreviousEndpointSlot	1.3.6.1.4.1.3085.3.1.13.11	Integer32	accessible-for-notify	Previous slot number of the protection-to-primary endpoint.
NTF csOrionPacketRingStatusChange	1.3.6.1.4.1.3085.3.1.1.1.45			A csOrionPacketRingStatusChange trap signifies that the packet ring status of the chassis has changed. If both endpoints change from zero to r[1,26], that means the status has changed to protection ring. If both endpoints change from r[1,26] to zero, that means the status has changed to no protection ring. If one/both endpoints change from r[1,26] to different r[1,26], that means the topology has changed but not ring status.
csOrionPbf	1.3.6.1.4.1.3085.3.1.4.2.12
csOrionPing	1.3.6.1.4.1.3085.3.1.4.2.1.3
csOrionPingCtl	1.3.6.1.4.1.3085.3.1.4.2.1.3.1
INT csOrionPingCtlAdminStatus	1.3.6.1.4.1.3085.3.1.4.2.1.3.1.1.1.5	INTEGER	read-create	Reflects the desired state that a csOrionPingCtlEntry should be in: enabled(1) - Attempt to activate the test as defined by this csOrionPingCtlEntry. disabled(2) - Deactivate the test as defined by this csOrionPingCtlEntry. Refer to the corresponding csOrionPingResultsOperStatus to determine the operational state of the test defined by this entry.
csOrionPingCtlEntry	1.3.6.1.4.1.3085.3.1.4.2.1.3.1.1.1		not-accessible	Defines an entry in the csOrionPingCtlTable. The 3rd index, csOrionPingCtlTestName, must have the following format when used for Tunnel Keepalives: TUNNEL vi-id.
U32 csOrionPingCtlFrequency	1.3.6.1.4.1.3085.3.1.4.2.1.3.1.1.1.6	Unsigned32	read-create	The number of seconds to wait before repeating a ping test as defined by the value of the various objects in the corresponding row. A single ping test consists of a series of ping probes. The number of probes is determined by the value of the corresponding csOrionPingCtlProbeCount object. After a single test completes the number of seconds as defined by the value of csOrionPingCtlFrequency MUST elapse before the next ping test is started. A value of 0 for this object implies that the test as defined by the corresponding entry will not be repeated.
U32 csOrionPingCtlLength	1.3.6.1.4.1.3085.3.1.4.2.1.3.1.1.1.10	Unsigned32	read-create	Specifies the length of the data portion of the ICMP Echo Request packet.
U32 csOrionPingCtlProbeCount	1.3.6.1.4.1.3085.3.1.4.2.1.3.1.1.1.4	Unsigned32	read-create	Specifies the number of times to perform a ping operation at a remote host.
ROW csOrionPingCtlRowStatus	1.3.6.1.4.1.3085.3.1.4.2.1.3.1.1.1.8	RowStatus	read-create	This object allows entries to be created and deleted in the csOrionPingCtlTable. Deletion of an entry in this table results in all corresponding (same csOrionPingCtlTestName index values) csOrionPingResultsTable entries being deleted. A value MUST be specified for csOrionPingCtlTargetAddress prior to a transition to active(1) state being accepted. This object only supports the createAndGo method of row creation. Remove an entry in this table by setting its RowStatus object to destroy(6).
IP csOrionPingCtlSourceAddress	1.3.6.1.4.1.3085.3.1.4.2.1.3.1.1.1.9	IpAddress	read-create	Specifies the Source IP address to be used when performing a ping operation. If this object has the value 0.0.0.0, the Source IP Address will be determined automatically by the IP layer.
csOrionPingCtlTable	1.3.6.1.4.1.3085.3.1.4.2.1.3.1.1		not-accessible	Defines the ping Control Table for provide, via SNMP, the capability of performing ping operations at a remote host. The results of these operations are stored in the csOrionPingResultsTable.
IP csOrionPingCtlTargetAddress	1.3.6.1.4.1.3085.3.1.4.2.1.3.1.1.1.2	IpAddress	read-create	Specifies the host address to be used at a remote host for performing a ping operation. A value for this object MUST be set prior to transitioning its corresponding csOrionPingCtlEntry to active(1) via csOrionPingCtlRowStatus.
STR csOrionPingCtlTestName	1.3.6.1.4.1.3085.3.1.4.2.1.3.1.1.1.1	DisplayString	not-accessible	The name of the ping test. This is locally unique, within the scope of a Virtual Router. This must have the following format when used for Tunnel Keepalives: TUNNEL vi-id
U32 csOrionPingCtlTimeOut	1.3.6.1.4.1.3085.3.1.4.2.1.3.1.1.1.3	Unsigned32	read-create	Specifies the time-out value, in seconds, for a remote ping operation.
U32 csOrionPingCtlTrapFilter	1.3.6.1.4.1.3085.3.1.4.2.1.3.1.1.1.7	Unsigned32	read-create	The value of this object is used to determine when a Ping Test fails. If the number of unanswered Ping requests within a test is greater that the value of this object within, then the test has failed.
U32 csOrionPingCtlTtl	1.3.6.1.4.1.3085.3.1.4.2.1.3.1.1.1.11	Unsigned32	read-create	Specifies the Time-To-Live value used in the IP Header when performing a ping operation. Note, if this object has the value 0, the IP layer will set the TTL value to its default.
I32 csOrionPingEnd	1.3.6.1.4.1.3085.3.1.4.2.1.3.3	Integer32	read-only	End of this group. value undefined
csOrionPingResults	1.3.6.1.4.1.3085.3.1.4.2.1.3.2
U32 csOrionPingResultsAverageRtt	1.3.6.1.4.1.3085.3.1.4.2.1.3.2.2.1.4	Unsigned32	read-only	The current average ping round-trip-time (RTT).
INT csOrionPingResultsCurrentStatus	1.3.6.1.4.1.3085.3.1.4.2.1.3.2.2.1.11	INTEGER	read-only	This object has the results of the most recently completed ping test. If no test has yet been completed, this object will have the value: unknown(1).
csOrionPingResultsEntry	1.3.6.1.4.1.3085.3.1.4.2.1.3.2.2.1		not-accessible	Defines an entry in the csOrionPingResultsTable. The csOrionPingResultsTable has the same indexing as the csOrionPingCtlTable in order for a csOrionPingResultsEntry to correspond to the csOrionPingCtlEntry that caused it to be created.
C32 csOrionPingResultsErrors	1.3.6.1.4.1.3085.3.1.4.2.1.3.2.2.1.7	Counter32	read-only	The value of this object reflects the number of times errors were encountered while attempting to send a probe.
IP csOrionPingResultsIpTargetAddress	1.3.6.1.4.1.3085.3.1.4.2.1.3.2.2.1.1	IpAddress	read-only	This objects reports the IP address associated with a csOrionPingCtlTargetAddress.
C32 csOrionPingResultsLates	1.3.6.1.4.1.3085.3.1.4.2.1.3.2.2.1.9	Counter32	read-only	The value of this object reflects the number of times a probe was sent and a response was received more than csOrionPingCtlTimeOut seconds later. Note, responses that are marked 'late' are not reflected in the csOrionPingCtlTimeOut counter.
U32 csOrionPingResultsMaxRtt	1.3.6.1.4.1.3085.3.1.4.2.1.3.2.2.1.3	Unsigned32	read-only	The maximum ping round-trip-time (RTT) received.
U32 csOrionPingResultsMinRtt	1.3.6.1.4.1.3085.3.1.4.2.1.3.2.2.1.2	Unsigned32	read-only	The minimum ping round-trip-time (RTT) received.
C32 csOrionPingResultsProbeResponses	1.3.6.1.4.1.3085.3.1.4.2.1.3.2.2.1.5	Counter32	read-only	Number of responses received for the corresponding csOrionPingCtlEntry and csOrionPingResultsEntry. The value of this object MUST be reported as 0 when no probe responses have been received.
C32 csOrionPingResultsSentProbes	1.3.6.1.4.1.3085.3.1.4.2.1.3.2.2.1.6	Counter32	read-only	The value of this object reflects the number of probes sent for the corresponding csOrionPingCtlEntry and csOrionPingResultsEntry. The value of this object MUST be reported as 0 when no probes have been sent.
csOrionPingResultsTable	1.3.6.1.4.1.3085.3.1.4.2.1.3.2.2		not-accessible	Defines the Ping Results Table for providing the capability of performing ping operations at a remote host. The results of these operations are stored in the csOrionPingResultsTable and the pingPastProbeTable. An entry is added to the csOrionPingResultsTable when an csOrionPingCtlEntry is started by successful transition of its csOrionPingCtlAdminStatus object to enabled(1). An entry is removed from the csOrionPingResultsTable when its corresponding csOrionPingCtlEntry is deleted.
C32 csOrionPingResultsTimeOuts	1.3.6.1.4.1.3085.3.1.4.2.1.3.2.2.1.8	Counter32	read-only	The value of this object reflects the number of times a probe was sent and more than csOrionPingCtlTimeOut seconds was spent waiting for the response.
C32 csOrionPingResultsUnreachables	1.3.6.1.4.1.3085.3.1.4.2.1.3.2.2.1.10	Counter32	read-only	The value of this object reflects the number of times a probe was sent and an ICMP Destination Unreachable message was received.
csOrionPktFilterInfo	1.3.6.1.4.1.3085.3.1.6.3
I32 csOrionPktFilterInfoEnd	1.3.6.1.4.1.3085.3.1.6.3.3	Integer32	read-only	End of this group. value undefined
I32 csOrionPortIndex	1.3.6.1.4.1.3085.3.1.4.3.10	Integer32	read-only	For port level alarms related traps, this identifies the port index (relative to the slot index) of the alarm origination.
csOrionPortInfo	1.3.6.1.4.1.3085.3.1.3
csOrionPowerSupplyControlInfo	1.3.6.1.4.1.3085.3.1.7.3
csOrionPowerSupplyEntry	1.3.6.1.4.1.3085.3.1.7.1.1		not-accessible	An entry containing power supply state information.
INT csOrionPowerSupplyEvent	1.3.6.1.4.1.3085.3.1.13.3	INTEGER	accessible-for-notify	A power supply event.
INT csOrionPowerSupplyEventTrapGeneration	1.3.6.1.4.1.3085.3.1.7.3.6	INTEGER	read-write	This object is used to enable/disable the generation of events and traps of the power supply.
STR csOrionPowerSupplyFWMajorRevision	1.3.6.1.4.1.3085.3.1.7.3.2	DisplayString	not-accessible	The major firmware revision information of the power supply controller.
STR csOrionPowerSupplyFWMinorRevision	1.3.6.1.4.1.3085.3.1.7.3.3	DisplayString	not-accessible	The minor firmware revision information of the power supply controller.
STR csOrionPowerSupplyFWRelease	1.3.6.1.4.1.3085.3.1.7.3.4	DisplayString	not-accessible	The firmware release of the power supply controller.
STR csOrionPowerSupplyFWReleaseDate	1.3.6.1.4.1.3085.3.1.7.3.5	DisplayString	not-accessible	A textual string containing information about the date of the firmware release.
STR csOrionPowerSupplyHWRevision	1.3.6.1.4.1.3085.3.1.7.3.1	DisplayString	not-accessible	The hardward revision information of the power supply controller.
I32 csOrionPowerSupplyIndex	1.3.6.1.4.1.3085.3.1.7.1.1.1	Integer32	read-only	An index for a power supply table.
INT csOrionPowerSupplyInputPowerState	1.3.6.1.4.1.3085.3.1.7.1.1.2	INTEGER	not-accessible	A power supply's input power state.
INT csOrionPowerSupplyMonitorEvent	1.3.6.1.4.1.3085.3.1.13.15	INTEGER	accessible-for-notify	A power supply monitor event.
NTF csOrionPowerSupplyMonitorStatusChange	1.3.6.1.4.1.3085.3.1.1.1.48			This trap indicates a power supply monitor event. The following events are reported: redundancyRegained (1) redundancyLost (2) auxVoltageRisingAboveLowerCriticalThreshold (3) auxVoltageFallingBelowLowerCriticalThreshold (4)
INT csOrionPowerSupplyOutputPowerState	1.3.6.1.4.1.3085.3.1.7.1.1.3	INTEGER	not-accessible	A power supply's output power state.
NTF csOrionPowerSupplyStatusChange	1.3.6.1.4.1.3085.3.1.1.1.7			This trap indicates one of the power supplies has changed state. The following events are reported: supplyModuleInserted (1) supplyModuleRemoved (2) inputVoltageRisingAbovePastLowerCriticalThreshold (3) inputVoltageFallingBelowLowerCriticalThreshold (4) outputVoltageRisingAboveLowerCriticalThreshold (5) outputVoltageFallingBelowLowerCriticalThreshold (6) outputCurrentRisingAboveUpperCriticalThreshold (7) outputCurrentFallingBelowUpperCriticalThreshold (8) auxVoltageRisingAboveLowerCriticalThreshold (9) auxVoltageFallingBelowLowerCriticalThreshold (10) temperatureRisingAboveUpperCriticalThreshold (11) temperatureFallingBelowUpperCriticalThreshold (12) currentShareRisingAboveLowerCriticalThreshold (13) currentShareFallingBelowLowerCriticalThreshold (14)
csOrionPowerSupplyTable	1.3.6.1.4.1.3085.3.1.7.1		not-accessible	A table for power supplies.
I32 csOrionPpoeInfoEnd	1.3.6.1.4.1.3085.3.1.6.17.4	Integer32	read-only	End of this group. value undefined
csOrionPppConfigEntry	1.3.6.1.4.1.3085.3.1.6.7.1.1		not-accessible	Each entry represents the PPP configuration parameters for a single Virtual Router.
STR csOrionPppConfigHostname	1.3.6.1.4.1.3085.3.1.6.7.1.1.1	DisplayString	read-create	The name of this Virtual Router used during pap/chap authentication.
csOrionPppConfigTable	1.3.6.1.4.1.3085.3.1.6.7.1		not-accessible	This table contains general PPP configuration parameters.
INT csOrionPppIfAdminStatus	1.3.6.1.4.1.3085.3.1.6.7.2.1.14	INTEGER	read-write	This object is used to enable/disable the PPP.
I32 csOrionPppIfChIndex	1.3.6.1.4.1.3085.3.1.6.7.2.1.4	Integer32	not-accessible	The Channel Id of this Logical Interface. Channel is 0 if this object is in the Unchannelized DS3/E3 or ATM PVC.
INT csOrionPppIfConfigAuth	1.3.6.1.4.1.3085.3.1.6.7.2.1.6	INTEGER	read-write	The type of authentication used by PPP over this Logical Interface.
csOrionPppIfConfigEntry	1.3.6.1.4.1.3085.3.1.6.7.2.1		not-accessible	Each entry represents the PPP interface-specific configuration parameters for a single Logical Interface.
I32 csOrionPppIfConfigReqRtx	1.3.6.1.4.1.3085.3.1.6.7.2.1.10	Integer32	read-write	The maximum number of PPP configuration request retransmissions attempted on this Logical Interface.
csOrionPppIfConfigTable	1.3.6.1.4.1.3085.3.1.6.7.2		not-accessible	This table contains interface-specific PPP configuration parameters.
I32 csOrionPppIfEchoTimeout	1.3.6.1.4.1.3085.3.1.6.7.2.1.18	Integer32	read-write	The echo timeout (keepalive) in seconds.
INT csOrionPppIfEncryption	1.3.6.1.4.1.3085.3.1.6.7.2.1.7	INTEGER	read-write	NOTE: This object has been obsoleted.
INT csOrionPppIfEncryptionMode	1.3.6.1.4.1.3085.3.1.6.7.2.1.8	INTEGER	read-write	NOTE: This object has been obsoleted.
EVL csOrionPppIfEvLogArea	1.3.6.1.4.1.3085.3.1.6.7.2.1.17	EvLogArea	read-write	This object is used to set the area of event logs for PPP. Events which area is not specified in this object will not be logged.
EVL csOrionPppIfEvLogLevel	1.3.6.1.4.1.3085.3.1.6.7.2.1.16	EvLogLevel	read-write	This object is used to set the level of details for event logs for PPP. Events with level higher than this object will not be logged.
I32 csOrionPppIfModuleIndex	1.3.6.1.4.1.3085.3.1.6.7.2.1.2	Integer32	not-accessible	The Module Index of this Logical Interface.
OPE csOrionPppIfOperStatus	1.3.6.1.4.1.3085.3.1.6.7.2.1.15	OperStatus	read-only	The operational status for this interface.
I32 csOrionPppIfPortIndex	1.3.6.1.4.1.3085.3.1.6.7.2.1.3	Integer32	not-accessible	The Port Id of this Logical Interface.
I32 csOrionPppIfReauth	1.3.6.1.4.1.3085.3.1.6.7.2.1.13	Integer32	read-write	The amount of time (in seconds) between re-authentication requests on an established PPP connection on this Logical Interface. The value 0 disabled re-authentication.
I32 csOrionPppIfRetransmit	1.3.6.1.4.1.3085.3.1.6.7.2.1.9	Integer32	read-write	The maximum number of PPP retransmissions attempted on this Logical Interface.
I32 csOrionPppIfSlotIndex	1.3.6.1.4.1.3085.3.1.6.7.2.1.1	Integer32	not-accessible	The Slot Id of this Logical Interface.
I32 csOrionPppIfSubIfIndex	1.3.6.1.4.1.3085.3.1.6.7.2.1.5	Integer32	not-accessible	The identifier for this logical interface. This corresponds to the 'subinterface' entered via the CLI. A sub-if 0 will be used for PPP objects other than in PPP over ATM.
I32 csOrionPppIfTerminateReqRtx	1.3.6.1.4.1.3085.3.1.6.7.2.1.11	Integer32	read-write	The maximum number of PPP terminate request retransmissions attempted on this Logical Interface.
I32 csOrionPppIfTimeout	1.3.6.1.4.1.3085.3.1.6.7.2.1.12	Integer32	read-write	The amount of time (in seconds) between retransmit attempts on this Logical Interface.
csOrionPppInfo	1.3.6.1.4.1.3085.3.1.6.7
I32 csOrionPppInfoEnd	1.3.6.1.4.1.3085.3.1.6.7.4	Integer32	read-only	End of this group. value undefined
csOrionPppoeInfo	1.3.6.1.4.1.3085.3.1.6.17
STR csOrionPppRemoteUserConnProfile	1.3.6.1.4.1.3085.3.1.6.7.3.1.4	DisplayString	read-create	The connection profile for this user. Refer to csOrionConnectionProfileName object.
csOrionPppRemoteUserEntry	1.3.6.1.4.1.3085.3.1.6.7.3.1		not-accessible	Each entry represents a single username, password pair.
STR csOrionPppRemoteUserName	1.3.6.1.4.1.3085.3.1.6.7.3.1.1	DisplayString	not-accessible	The name of a remote user.
STR csOrionPppRemoteUserPassword	1.3.6.1.4.1.3085.3.1.6.7.3.1.2	DisplayString	read-create	The password of a remote user.
ROW csOrionPppRemoteUserRowStatus	1.3.6.1.4.1.3085.3.1.6.7.3.1.3	RowStatus	read-create	The RowStatus object for this table.
csOrionPppRemoteUserTable	1.3.6.1.4.1.3085.3.1.6.7.3		not-accessible	This table contains remote username/password pairs. This database is used to authenticate remote users via PAP or CHAP.
INT csOrionPptpConfAuthentication	1.3.6.1.4.1.3085.3.1.6.8.1.1.6	INTEGER	read-write	The type of authentication used by PPTP Server on this Virtual Router.
INT csOrionPptpConfEncryption	1.3.6.1.4.1.3085.3.1.6.8.1.1.5	INTEGER	read-write	The type of encryption used by PPTP Server on this Virtual Router.
csOrionPptpConfEntry	1.3.6.1.4.1.3085.3.1.6.8.1.1		not-accessible	Each entry represents a set of Pptp configuration for a single Virtual Router.
I32 csOrionPptpConfIdleTimeout	1.3.6.1.4.1.3085.3.1.6.8.1.1.3	Integer32	read-write	The amount of time the Pptp server allows a connection to remain idle. A value 0 would mean no timeout.
STR csOrionPptpConfIpPool	1.3.6.1.4.1.3085.3.1.6.8.1.1.7	DisplayString	read-write	This object identifies the Ip Local Address Pool that should be used by this PPTP Server to assign addresses to dynamic PPTP connections.
I32 csOrionPptpConfMaxConn	1.3.6.1.4.1.3085.3.1.6.8.1.1.2	Integer32	read-write	The maximum number of simultaneous Pptp connections supported by this Virtual Router.
I32 csOrionPptpConfPPPKeepAliveInterval	1.3.6.1.4.1.3085.3.1.6.8.1.1.4	Integer32	read-write	The timeout interval value the PPTP connection uses to send PPP keepalive requests. A value 0 would mean no timeout.
INT csOrionPptpConfStatus	1.3.6.1.4.1.3085.3.1.6.8.1.1.1	INTEGER	read-write	This object enables or disables the PPTP Server on this Virtual Router.
csOrionPptpConfTable	1.3.6.1.4.1.3085.3.1.6.8.1		not-accessible	This table contains general Pptp Configuration parameters.
I32 csOrionPptpConnAge	1.3.6.1.4.1.3085.3.1.6.8.2.1.3	Integer32	read-only	The age (in seconds) of this Pptp connection.
csOrionPptpConnEntry	1.3.6.1.4.1.3085.3.1.6.8.2.1		not-accessible	Each entry represents a single Pptp connection.
IP csOrionPptpConnFarIpAddr	1.3.6.1.4.1.3085.3.1.6.8.2.1.1	IpAddress	not-accessible	This object identifies the far end of a Pptp connection.
STR csOrionPptpConnFarUsername	1.3.6.1.4.1.3085.3.1.6.8.2.1.5	DisplayString	read-only	This is the username on the other end of the connection.
IP csOrionPptpConnLocalIpAddr	1.3.6.1.4.1.3085.3.1.6.8.2.1.2	IpAddress	not-accessible	This object identifies the local end of a Pptp connection.
INT csOrionPptpConnStatus	1.3.6.1.4.1.3085.3.1.6.8.2.1.4	INTEGER	read-write	This object can be used to remove a Pptp connection by setting the value to disabled.
csOrionPptpConnTable	1.3.6.1.4.1.3085.3.1.6.8.2		not-accessible	This table identifies all the current Pptp connections on this Virtual Router.
csOrionPptpInfo	1.3.6.1.4.1.3085.3.1.6.8
I32 csOrionPptpInfoEnd	1.3.6.1.4.1.3085.3.1.6.8.3	Integer32	read-only	End of this group. value undefined
csOrionPPVpn	1.3.6.1.4.1.3085.3.1.4.2.11
csOrionPPVpnObjects	1.3.6.1.4.1.3085.3.1.4.2.11.1
csOrionPWE3	1.3.6.1.4.1.3085.3.1.4.2.14
csOrionPWE3Objects	1.3.6.1.4.1.3085.3.1.4.2.14.1
csOrionQosInfo	1.3.6.1.4.1.3085.3.1.6.14
I32 csOrionQosInfoEnd	1.3.6.1.4.1.3085.3.1.6.14.3	Integer32	read-only	End of this group. value undefined
STR csOrionQoSMeterAclList	1.3.6.1.4.1.3085.3.1.6.22.2.1.7	DisplayString	read-only	ACLs that are associated with the metering control block
csOrionQoSMeterEntry	1.3.6.1.4.1.3085.3.1.6.22.2.1		not-accessible	Metering context entries
C32 csOrionQoSMeterGreenByteCount	1.3.6.1.4.1.3085.3.1.6.22.2.1.6	Counter32	read-only	Number of green bytes on this flow.
STR csOrionQoSMeterName	1.3.6.1.4.1.3085.3.1.6.22.2.1.1	DisplayString	not-accessible	Name of the metering control block(MCB) - index to this table
STR csOrionQoSMeterProfile	1.3.6.1.4.1.3085.3.1.6.22.2.1.2	DisplayString	read-create	Name of the metering profile to be applied to this MCB
I32 csOrionQoSMeterProfileCBS	1.3.6.1.4.1.3085.3.1.6.22.1.1.2	Integer32	read-create	Committed Burst Size
I32 csOrionQoSMeterProfileCIR	1.3.6.1.4.1.3085.3.1.6.22.1.1.4	Integer32	read-create	Committed Information Rate
INT csOrionQoSMeterProfileColorMode	1.3.6.1.4.1.3085.3.1.6.22.1.1.7	INTEGER	read-create	Color marker metering mode.
INT csOrionQoSMeterProfileDropPrecedence	1.3.6.1.4.1.3085.3.1.6.22.1.1.6	INTEGER	read-create	Drop option. If set to 'red' it will drop incoming red packets belonging to this ACL group. If set to 'redYellow' it will drop both red and yellow packets.
csOrionQoSMeterProfileEntry	1.3.6.1.4.1.3085.3.1.6.22.1.1		not-accessible	Each entry specifies unique Metering profile
I32 csOrionQoSMeterProfileMIR	1.3.6.1.4.1.3085.3.1.6.22.1.1.5	Integer32	read-create	Maximum Information Rate
STR csOrionQoSMeterProfileName	1.3.6.1.4.1.3085.3.1.6.22.1.1.1	DisplayString	not-accessible	The Index of this table.
I32 csOrionQoSMeterProfilePBS	1.3.6.1.4.1.3085.3.1.6.22.1.1.3	Integer32	read-create	Peak Burst Size
ROW csOrionQoSMeterProfileStatus	1.3.6.1.4.1.3085.3.1.6.22.1.1.8	RowStatus	read-create	Creates or deletes the profile
csOrionQoSMeterProfileTable	1.3.6.1.4.1.3085.3.1.6.22.1		not-accessible	This table specifies the template of the metering control block. This template can be applied to any of the metering contexts under QoS of VR and VI
C32 csOrionQoSMeterRedByteCount	1.3.6.1.4.1.3085.3.1.6.22.2.1.4	Counter32	read-only	Number of red bytes on this flow.
ROW csOrionQoSMeterStatus	1.3.6.1.4.1.3085.3.1.6.22.2.1.8	RowStatus	read-create	Creates or deletes the profile
csOrionQoSMeterTable	1.3.6.1.4.1.3085.3.1.6.22.2		not-accessible	This table specifies the metering control block for each of the traffic flows
C32 csOrionQoSMeterTotalPackets	1.3.6.1.4.1.3085.3.1.6.22.2.1.3	Counter32	read-only	Total number of packets metered for this flow
C32 csOrionQoSMeterYellowByteCount	1.3.6.1.4.1.3085.3.1.6.22.2.1.5	Counter32	read-only	Number of yellow bytes on this flow.
C32 csOrionQueueAverageSize	1.3.6.1.4.1.3085.3.1.5.3.3.1.13	Counter32	read-only	Average Queue Size at the present moment
INT csOrionQueueClassOfService	1.3.6.1.4.1.3085.3.1.5.3.3.1.2	INTEGER	read-only	Identifies a class of service this queue is handling.
csOrionQueueEntry	1.3.6.1.4.1.3085.3.1.5.3.3.1		not-accessible	An entry containing management information applicable to a particular queue.
csOrionQueueGroupEntry	1.3.6.1.4.1.3085.3.1.5.3.1.1		not-accessible	An entry containing management information applicable to a particular group of queue.
I32 csOrionQueueGroupId	1.3.6.1.4.1.3085.3.1.5.3.1.1.2	Integer32	not-accessible	A unique id for each group of Queues. Currently (March 2001, for Release 3.0), there is only one group of queues to be shared by all ports/interfaces. And also one group of queues used to send out packets to the packet-ring. A future hardware version could come up with one group of queues per port, or multiple system queues. Our MIB model is ready for that.
OPE csOrionQueueGroupOperStatus	1.3.6.1.4.1.3085.3.1.5.3.1.1.5	OperStatus	read-only	Indicates operational status of this queue group.
I32 csOrionQueueGroupPriorityIndex	1.3.6.1.4.1.3085.3.1.5.3.1.1.3	Integer32	not-accessible	A unique id for each group of priority of Queues. Currently (July 2001, for Release 3.0), there is only four priority groups. Priority Group 1, 2 and 3 have 100% and priority group 4 a group of 5 queues.
OCT csOrionQueueGroupSubGroupAllocation	1.3.6.1.4.1.3085.3.1.5.3.1.1.4	OCTET STRING	read-write	An action object used to set the weigth of all queues that belong to the same group priority. It starts with octet 1 for the first queue and octet n-1 for the last queue. Each value will be propagated to the parameter csOrionQueueWeight of a specific csOrionQueueEntry. That should be used for reading. Currently(rel.3.0), a single priority group can have only a maximum of 5 queues. And, sum of percentage of all the Queues must not exceed 100%
csOrionQueueGroupTable	1.3.6.1.4.1.3085.3.1.5.3.1		not-accessible	A list of group of queues found in every blade
I32 csOrionQueueGroupTableEnd	1.3.6.1.4.1.3085.3.1.5.3.2	Integer32	read-only	End of this group. value undefined
INT csOrionQueueGroupType	1.3.6.1.4.1.3085.3.1.5.3.1.1.1	INTEGER	not-accessible	Indicates the type of queue group. 'systemQueue' is a group of queue used by the system as it sends out packets to the backplane. 'portQueue' is used by the the interface ports.
I32 csOrionQueueId	1.3.6.1.4.1.3085.3.1.5.3.3.1.1	Integer32	not-accessible	A unique id for each queue. Currently(rel.3.0), there are only 8 queues in every group.
csOrionQueueInfo	1.3.6.1.4.1.3085.3.1.6.6
INT csOrionQueueMaxRandomForGreen	1.3.6.1.4.1.3085.3.1.5.3.3.1.9	INTEGER	read-write	The max_random for green puts a cap on the random number generated by hardware Represented in .
INT csOrionQueueMaxRandomForRed	1.3.6.1.4.1.3085.3.1.5.3.3.1.7	INTEGER	read-write	The max_random for red puts a cap on the random number generated by hardware Represented in .
INT csOrionQueueMaxRandomForYellow	1.3.6.1.4.1.3085.3.1.5.3.3.1.8	INTEGER	read-write	The max_random for yellow puts a cap on the random number generated by hardware Represented in .
INT csOrionQueueMaxThreshold	1.3.6.1.4.1.3085.3.1.5.3.3.1.10	INTEGER	read-write	Max threshold to discarding packets (red, yellow and green). Represented as the percentage of the queue size, 256KB.
INT csOrionQueueMinThresholdForGreen	1.3.6.1.4.1.3085.3.1.5.3.3.1.6	INTEGER	read-write	Min threshold to start discarding the green packet. Represented as the percentage of the queue size, 256KB.
INT csOrionQueueMinThresholdForRed	1.3.6.1.4.1.3085.3.1.5.3.3.1.4	INTEGER	read-write	Min threshold to start discarding the red packet. Represented as the percentage of the queue size, 256KB.
INT csOrionQueueMinThresholdForYellow	1.3.6.1.4.1.3085.3.1.5.3.3.1.5	INTEGER	read-write	Min threshold to start discarding the yellow packet. Represented as the percentage of the queue size, 256KB.
C32 csOrionQueuePacketCount	1.3.6.1.4.1.3085.3.1.5.3.3.1.12	Counter32	read-only	Total number of packets counted so far.
csOrionQueueTable	1.3.6.1.4.1.3085.3.1.5.3.3		not-accessible	A list of individual queues in every csOrionGroupQueueTable
C32 csOrionQueueTotalByteCount	1.3.6.1.4.1.3085.3.1.5.3.3.1.11	Counter32	read-only	Total number of bytes dropped.
I32 csOrionQueueWeight	1.3.6.1.4.1.3085.3.1.5.3.3.1.3	Integer32	read-only	Weight setting of this queue for scheduling expressed in percent. This can be modified along with other queues on the same priority group through the object csOrionQueueGroupPriorityAllocation.
csOrionRadiusAcctEntry	1.3.6.1.4.1.3085.3.1.10.2.2.3		not-accessible	Each entry contains composite stats for a single VPN.
INT csOrionRadiusAcctFlush	1.3.6.1.4.1.3085.3.1.10.2.1	INTEGER	read-write	This object is used to flush the contents of the csOrionRadiusAcctTable. To flush the table, set the value of this object to 1.
I32 csOrionRadiusAcctIndex	1.3.6.1.4.1.3085.3.1.10.2.2.3.1	Integer32	not-accessible	The index of this radius accounting entry. The values will increase monotonically, even after the entries have been flushed.
OCT csOrionRadiusAcctInfo	1.3.6.1.4.1.3085.3.1.10.2.2.3.5	OCTET STRING	read-only	Information describing the creation or termination of a dynamic connection to a virtual router. The information is presented in standard radius accounting format.
csOrionRadiusAcctTable	1.3.6.1.4.1.3085.3.1.10.2.2		not-accessible	This table contains composite stats for each of the VRs in this Orion.
TIK csOrionRadiusAcctTimestamp	1.3.6.1.4.1.3085.3.1.10.2.2.3.2	TimeTicks	read-only	The value of sysUpTime when this entry was created.
I32 csOrionRadiusAcctVpnId	1.3.6.1.4.1.3085.3.1.10.2.2.3.3	Integer32	read-only	The Id of the VPN that originated this radius accounting entry.
IP csOrionRadiusAcctVrId	1.3.6.1.4.1.3085.3.1.10.2.2.3.4	IpAddress	read-only	The Id of the VR that originated this radius accounting entry.
csOrionRadiusInfo	1.3.6.1.4.1.3085.3.1.6.9
I32 csOrionRadiusInfoEnd	1.3.6.1.4.1.3085.3.1.6.9.4	Integer32	read-only	End of this group. value undefined
INT csOrionRestoreBladeStatus	1.3.6.1.4.1.3085.3.1.4.3.11	INTEGER	read-only	Blade Restoration status. Fail if blade is not restored successfully. Success if blade restoration is successfull. Cold-start if blade reboots. Note that cold-start will not have restored data presented in the trap packet
I32 csOrionRestoreNumVRs	1.3.6.1.4.1.3085.3.1.4.3.13	Integer32	read-only	Number of VRs affected by this blade restoration trap. This corresponds the number of VPN/VRs that follows.
I32 csOrionRestoreSlotIndex	1.3.6.1.4.1.3085.3.1.4.3.12	Integer32	read-only	Slot number of the affected blade.
csOrionRip	1.3.6.1.4.1.3085.3.1.4.2.5
I32 csOrionRipEnd	1.3.6.1.4.1.3085.3.1.4.2.5.3	Integer32	read-only	End of this group. value undefined
csOrionServiceInfo	1.3.6.1.4.1.3085.3.1.6
NTF csOrionServiceProviderVIfDown	1.3.6.1.4.1.3085.3.1.1.1.35			A csOrionServiceProviderVIfDown trap signifies that a Virtual Interface on a Service Provider VR has gone down.
NTF csOrionServiceProviderVIfUp	1.3.6.1.4.1.3085.3.1.1.1.34			A csOrionServiceProviderVIfUp trap signifies that a Virtual Interface on a Service Provider VR has come up.
NTF csOrionServiceProviderVrDown	1.3.6.1.4.1.3085.3.1.1.1.31			A csOrionServiceProviderVrDown trap signifies that a Virtual Router which is designated as a service provider VR has gone down.
NTF csOrionServiceProviderVrUp	1.3.6.1.4.1.3085.3.1.1.1.30			A csOrionServiceProviderVrUp trap signifies that a Virtual Router which is designated as a service provider VR has has come up.
csOrionServiceQueueInfo	1.3.6.1.4.1.3085.3.1.5.3
csOrionServiceSelectionInfo	1.3.6.1.4.1.3085.3.1.6.18
I32 csOrionServiceSelectionInfoEnd	1.3.6.1.4.1.3085.3.1.6.18.5	Integer32	read-only	End of this group. value undefined
csOrionServiceTemplateConnProfileEntry	1.3.6.1.4.1.3085.3.1.6.18.4.2		not-accessible	This entry represents a single connection profile on a service selection.
STR csOrionServiceTemplateConnProfileName	1.3.6.1.4.1.3085.3.1.6.18.4.2.1	LongDisplayString	not-accessible	The name of the connection profile to be added in the table. NOTE: Must be an existing csOrionConnectionProfileName.
ROW csOrionServiceTemplateConnProfileRowStatus	1.3.6.1.4.1.3085.3.1.6.18.4.2.2	RowStatus	read-create	The row status for this table.
csOrionServiceTemplateConnProfileTable	1.3.6.1.4.1.3085.3.1.6.18.4		not-accessible	This table contains a list of connection profiles contained in a single service selection template.
csOrionServiceTemplateEntry	1.3.6.1.4.1.3085.3.1.6.18.3.2		not-accessible	This entry represents a single service selection.
STR csOrionServiceTemplateName	1.3.6.1.4.1.3085.3.1.6.18.3.2.1	LongDisplayString	not-accessible	The service selection template name.
ROW csOrionServiceTemplateRowStatus	1.3.6.1.4.1.3085.3.1.6.18.3.2.2	RowStatus	read-create	The row status for this table.
csOrionServiceTemplateTable	1.3.6.1.4.1.3085.3.1.6.18.3		not-accessible	This table contains a list of names of service selections. Each of this entry will hold a list of connection profiles. Refer to expansion table csOrionServiceTemplateConnProfileTable.
I32 csOrionSnmpAgentErrorCode	1.3.6.1.4.1.3085.3.1.9.1.3.1.4	Integer32	read-only	The error code set when the SNMP SET request resulted in an error.
csOrionSnmpAgentErrorEntry	1.3.6.1.4.1.3085.3.1.9.1.3.1		not-accessible	Each entry represent an error associated with a set operation by a management station. The Orion SNMP agent keeps track of the last 25 instances of such errors. Older entries give way for new entries.
STR csOrionSnmpAgentErrorMsg	1.3.6.1.4.1.3085.3.1.9.1.3.1.5	DisplayString	read-only	Error message corresponding to the SET operation.
IP csOrionSnmpAgentErrorNmsIpAddress	1.3.6.1.4.1.3085.3.1.9.1.3.1.1	IpAddress	read-only	IP address of the management station which made an unsuccessful SET operation.
I32 csOrionSnmpAgentErrorNmsPort	1.3.6.1.4.1.3085.3.1.9.1.3.1.2	Integer32	read-only	The UDP port of the SNMP SET request which resulted in an error.
I32 csOrionSnmpAgentErrorNmsRequestId	1.3.6.1.4.1.3085.3.1.9.1.3.1.3	Integer32	read-only	The requst-id field of the SNMP SET request which resulted in an error.
csOrionSnmpAgentErrorTable	1.3.6.1.4.1.3085.3.1.9.1.3		not-accessible	This table keeps track of the errors that happened when a NMS node tried to a SET operation. Since standard error codes returned by the SNMP response PDU was not comprehensive enough to indicate the actual problem, this table evolved. The NMS node has to keep the request-id field and the UDP port of the SET PDU that is being sent to the Orion SNMP agent. If the response-PDU corresponding to that SET returns an error, NMS node can browse this table with the saved request-id of the failed SET-PDU to get more information about the error.
IP csOrionSnmpCommAddr	1.3.6.1.4.1.3085.3.1.9.1.2.1.2	IpAddress	not-accessible	This object identifies the Ip Address of a manager allowed to use this community string.
csOrionSnmpCommEntry	1.3.6.1.4.1.3085.3.1.9.1.2.1		not-accessible	Each entry represents a single community string.
INT csOrionSnmpCommPriv	1.3.6.1.4.1.3085.3.1.9.1.2.1.3	INTEGER	read-create	This object indicates the privilege level of this community string. If the value of this object is readOnly(1), this snmp server will respond only to GET, GETNEXT, and GETBULK requests from snmp managers using this community string. If this value of this object is readWrite(2), this snmp server will respond to any requests from snmp managers using this community string.
ROW csOrionSnmpCommRowStatus	1.3.6.1.4.1.3085.3.1.9.1.2.1.4	RowStatus	read-create	A row status type for the Snmp Community Table.
STR csOrionSnmpCommString	1.3.6.1.4.1.3085.3.1.9.1.2.1.1	DisplayString	not-accessible	This object identifies one community string recognized by the snmp server on this device.
csOrionSnmpCommTable	1.3.6.1.4.1.3085.3.1.9.1.2		not-accessible	This table contains all the community strings recognized by the snmp server on this device.
csOrionSnmpGenEntry	1.3.6.1.4.1.3085.3.1.9.1.1.1		not-accessible	Each entry represents a single Virtual Router.
INT csOrionSnmpGenStatus	1.3.6.1.4.1.3085.3.1.9.1.1.1.1	INTEGER	read-write	This object is used to enable/disable the snmp server on this Virtual Router. If this object is disabled, the snmp server will not respond to any snmp requests and it won't send any traps.
csOrionSnmpGenTable	1.3.6.1.4.1.3085.3.1.9.1.1		not-accessible	This table controls the activation of the snmp agent on a particular Virtual Router. Note, only one agent instance can be enabled at a time.
csOrionSnmpInfo	1.3.6.1.4.1.3085.3.1.9
csOrionSnmpTrapEntry	1.3.6.1.4.1.3085.3.1.9.2.1.1		not-accessible	Each entry represents a single Virtual Router.
INT csOrionSnmpTrapStatus	1.3.6.1.4.1.3085.3.1.9.2.1.1.1	INTEGER	read-write	This object is used to control the trap function for the snmp server on this device. If the value of this object is enable(1), the snmp server will send traps. If the value is disable(2), the snmp server will not send traps.
csOrionSnmpTrapTable	1.3.6.1.4.1.3085.3.1.9.2.1		not-accessible	This table controls the generation of traps by this Virtual Router.
csOrionSpfInfo	1.3.6.1.4.1.3085.3.1.6.20
I32 csOrionSpfInfoEnd	1.3.6.1.4.1.3085.3.1.6.20.2	Integer32	read-only	End of this group. value undefined
csOrionStaticConn	1.3.6.1.4.1.3085.3.1.10.1
csOrionStatusPanelControlInfo	1.3.6.1.4.1.3085.3.1.7.6
STR csOrionStatusPanelFWMajorRevision	1.3.6.1.4.1.3085.3.1.7.6.2	DisplayString	not-accessible	The major firmware revision information of the status panel controller.
STR csOrionStatusPanelFWMinorRevision	1.3.6.1.4.1.3085.3.1.7.6.3	DisplayString	not-accessible	The minor firmware revision information of the status panel controller.
STR csOrionStatusPanelFWRelease	1.3.6.1.4.1.3085.3.1.7.6.4	DisplayString	not-accessible	The firmware release of the power supply controller.
STR csOrionStatusPanelFWReleaseDate	1.3.6.1.4.1.3085.3.1.7.6.5	DisplayString	not-accessible	A textual string containing information about the date of the firmware release.
STR csOrionStatusPanelHWRevision	1.3.6.1.4.1.3085.3.1.7.6.1	DisplayString	not-accessible	The hardward revision information of the status panel controller.
csOrionStatusPanelInfo	1.3.6.1.4.1.3085.3.1.14
SPP csOrionStatusPanelPortBaudRate	1.3.6.1.4.1.3085.3.1.14.1.1.2	SPPBaudRate	read-create	The baud rate of a Status Panel port.
csOrionStatusPanelPortEntry	1.3.6.1.4.1.3085.3.1.14.1.1		not-accessible	An entry containing management information applicable to a particular Status Panel port.
I32 csOrionStatusPanelPortIndex	1.3.6.1.4.1.3085.3.1.14.1.1.1	Integer32	not-accessible	An index for a Status Panel port.
SPP csOrionStatusPanelPortLoopback	1.3.6.1.4.1.3085.3.1.14.1.1.3	SPPLoopbackStatus	read-create	The loopback state of a Status Panel port.
SPP csOrionStatusPanelPortModemStatus	1.3.6.1.4.1.3085.3.1.14.1.1.4	SPPModemStatus	read-only	Whether or not a modem is connect to this Status Panel port.
SPP csOrionStatusPanelPortRedundantStatus	1.3.6.1.4.1.3085.3.1.14.1.1.5	SPPRedundantStatus	read-only	???? Ask Bev ????.
csOrionStatusPanelPortTable	1.3.6.1.4.1.3085.3.1.14.1		not-accessible	A table containing information about the Status Panel ports.
csOrionSyslogd	1.3.6.1.4.1.3085.3.1.12
csOrionSyslogdEntry	1.3.6.1.4.1.3085.3.1.12.1.1		not-accessible	Each entry represents a single Virtual Router.
INT csOrionSyslogdFacility1	1.3.6.1.4.1.3085.3.1.12.1.1.3	INTEGER	read-write	Mapping to Facility from Area 1
INT csOrionSyslogdFacility10	1.3.6.1.4.1.3085.3.1.12.1.1.17	INTEGER	read-write	Mapping to Facility from Area 10
INT csOrionSyslogdFacility11	1.3.6.1.4.1.3085.3.1.12.1.1.18	INTEGER	read-write	Mapping to Facility from Area 11
INT csOrionSyslogdFacility12	1.3.6.1.4.1.3085.3.1.12.1.1.19	INTEGER	read-write	Mapping to Facility from Area 12
INT csOrionSyslogdFacility2	1.3.6.1.4.1.3085.3.1.12.1.1.4	INTEGER	read-write	Mapping to Facility from Area 2
INT csOrionSyslogdFacility3	1.3.6.1.4.1.3085.3.1.12.1.1.5	INTEGER	read-write	Mapping to Facility from Area 3
INT csOrionSyslogdFacility4	1.3.6.1.4.1.3085.3.1.12.1.1.6	INTEGER	read-write	Mapping to Facility from Area 4
INT csOrionSyslogdFacility5	1.3.6.1.4.1.3085.3.1.12.1.1.7	INTEGER	read-write	Mapping to Facility from Area 5
INT csOrionSyslogdFacility6	1.3.6.1.4.1.3085.3.1.12.1.1.8	INTEGER	read-write	Mapping to Facility from Area 6
INT csOrionSyslogdFacility7	1.3.6.1.4.1.3085.3.1.12.1.1.9	INTEGER	read-write	Mapping to Facility from Area 7
INT csOrionSyslogdFacility8	1.3.6.1.4.1.3085.3.1.12.1.1.10	INTEGER	read-write	Mapping to Facility from Area 8
INT csOrionSyslogdFacility9	1.3.6.1.4.1.3085.3.1.12.1.1.16	INTEGER	read-write	Mapping to Facility from Area 9
INT csOrionSyslogdLevel1	1.3.6.1.4.1.3085.3.1.12.1.1.11	INTEGER	read-write	Mapping to syslogd Level from evlog level 1
INT csOrionSyslogdLevel2	1.3.6.1.4.1.3085.3.1.12.1.1.12	INTEGER	read-write	Mapping to syslogd Level from evlog level 2
INT csOrionSyslogdLevel3	1.3.6.1.4.1.3085.3.1.12.1.1.13	INTEGER	read-write	Mapping to syslogd Level from evlog level 3
INT csOrionSyslogdLevel4	1.3.6.1.4.1.3085.3.1.12.1.1.14	INTEGER	read-write	Mapping to syslogd Level from evlog level 4
INT csOrionSyslogdLevel5	1.3.6.1.4.1.3085.3.1.12.1.1.15	INTEGER	read-write	Mapping to syslogd Level from evlog level 5
IP csOrionSyslogdReceiverAddr	1.3.6.1.4.1.3085.3.1.12.1.1.2	IpAddress	read-write	IP address for syslogd server.
INT csOrionSyslogdStatus	1.3.6.1.4.1.3085.3.1.12.1.1.1	INTEGER	read-write	This object is used to enable/disable the syslogd client on this Virtual Router. If this object is disabled, the syslogd client will not forward any ev_log messages to a syslogd server.
csOrionSyslogdTable	1.3.6.1.4.1.3085.3.1.12.1		not-accessible	This table controls the activation of the syslogd client on a particular Virtual Router. Note, only one client can be enabled at a time.
csOrionSystem	1.3.6.1.4.1.3085.3.1.2
I32 csOrionSystemBootConcurrentDownloads	1.3.6.1.4.1.3085.3.1.2.2.1.1.18	Integer32	read-write	Maximum number of downloads that can occur concurrently. if configured to 0, then there is no limit to number of simultaneous download sessions. This is useful if the TFTP/FTP server cannot handle a large number of TFTP/FTP sessions
STR csOrionSystemBootConfig	1.3.6.1.4.1.3085.3.1.2.2.1.1.13	DisplayString	read-write	The absolute path and file name for the configuration file. Note, the configuration file must be on the local flash.
IP csOrionSystemBootDefGw	1.3.6.1.4.1.3085.3.1.2.2.1.1.12	IpAddress	read-write	When booting over the network, this object is used to identify the gateway to use in communicating with the boot server.
csOrionSystemBootEntry	1.3.6.1.4.1.3085.3.1.2.2.1.1		not-accessible	An entry containing Boot information applicable to this Orion System. Note, currently there is only one entry in this table. More entries may be added in future releases.
STR csOrionSystemBootImageName1	1.3.6.1.4.1.3085.3.1.2.2.1.1.2	DisplayString	read-write	The absolute path and file name for the boot image. If this string is prefaced with 'FLSH', tftp will be used to boot over the network. This applies to all 6 images.
STR csOrionSystemBootImageName2	1.3.6.1.4.1.3085.3.1.2.2.1.1.3	DisplayString	read-write	The 2nd absolute path and file name for the boot image. This will be used only if the previous boot images fail.
STR csOrionSystemBootImageName3	1.3.6.1.4.1.3085.3.1.2.2.1.1.4	DisplayString	read-write	The 3rd absolute path and file name for the boot image. This will be used only if the previous boot images fail.
STR csOrionSystemBootImageName4	1.3.6.1.4.1.3085.3.1.2.2.1.1.5	DisplayString	read-write	The 4th absolute path and file name for the boot image. This will be used only if the previous boot images fail.
STR csOrionSystemBootImageName5	1.3.6.1.4.1.3085.3.1.2.2.1.1.6	DisplayString	read-write	The 5th absolute path and file name for the boot image. This will be used only if the previous boot images fail.
STR csOrionSystemBootImageName6	1.3.6.1.4.1.3085.3.1.2.2.1.1.7	DisplayString	read-write	The 6th absolute path and file name for the boot image. This will be used only if the previous boot images fail.
I32 csOrionSystemBootIndex	1.3.6.1.4.1.3085.3.1.2.2.1.1.1	Integer32	not-accessible	A unique value, greater than zero, for each boot record.
IP csOrionSystemBootInternalNwAddr	1.3.6.1.4.1.3085.3.1.2.2.1.1.17	IpAddress	read-write	All the blades in the system make a internal network. This attribute defines the network part (255.255.0.0) of this subnet. Default is 172.168.0.0
IP csOrionSystemBootLocalIpAddr	1.3.6.1.4.1.3085.3.1.2.2.1.1.10	IpAddress	read-write	When booting over the network using a boot protocol that does not supply a source IP address, This object specifies the local IP address to use when booting via the network.
IP csOrionSystemBootLocalIpMask	1.3.6.1.4.1.3085.3.1.2.2.1.1.11	IpAddress	read-write	When booting over the network using a boot protocol that does not supply a source IP address, This object specifies the local IP address mask to use when booting via the network.
I32 csOrionSystemBootPort	1.3.6.1.4.1.3085.3.1.2.2.1.1.8	Integer32	read-write	When booting over the network, the port used to load the image
INT csOrionSystemBootSaveImage	1.3.6.1.4.1.3085.3.1.2.2.1.1.14	INTEGER	read-write	This object specifies whether the IPSX system will save the boot image in local flash. Note this applies only if the csOrionSystemBootProtocol is tftp(2).
IP csOrionSystemBootServerAddress	1.3.6.1.4.1.3085.3.1.2.2.1.1.9	IpAddress	read-write	A boot server Ip Address. Note, this only applies if this entry specifies booting over the network.
csOrionSystemBootTable	1.3.6.1.4.1.3085.3.1.2.2.1		not-accessible	A list of Sources from which this Orion will boot.
STR csOrionSystemBootUserName	1.3.6.1.4.1.3085.3.1.2.2.1.1.15	DisplayString	read-write	User Name to use if the download is via FTP
STR csOrionSystemBootUserPassword	1.3.6.1.4.1.3085.3.1.2.2.1.1.16	DisplayString	read-write	Password to use if the download is via FTP
INT csOrionSystemCLIRadiusAuthentication	1.3.6.1.4.1.3085.3.1.2.1.13	INTEGER	read-write	NOTE: This object has been replaced by csOrionSystemLoginServer. When this object is set to radius, radius server will be used to authenticate a user logging into a CLI session. When this object is set to localDatabase, the password file resided locally will be used to authenticate the CLI user.
INT csOrionSystemControlBladeFailOver	1.3.6.1.4.1.3085.3.1.2.1.12	INTEGER	read-write	When set to 'failover', the master control blade switches over to stand-by control blade. Setting it to 'none' has no effect, and when it is retrieved the value will always be 'none' .
STR csOrionSystemFwVer	1.3.6.1.4.1.3085.3.1.2.1.4	DisplayString	read-only	The fw version used by Orion
IP csOrionSystemGatewayAddress	1.3.6.1.4.1.3085.3.1.2.1.3	IpAddress	read-write	A system default gateway address.
IP csOrionSystemIpAddress	1.3.6.1.4.1.3085.3.1.2.1.1	IpAddress	read-write	A system Ip address.
STR csOrionSystemLoginDomainDesc	1.3.6.1.4.1.3085.3.1.2.3.3.1.2	DisplayString	read-create	Information about the access domain.
csOrionSystemLoginDomainEntry	1.3.6.1.4.1.3085.3.1.2.3.3.1		not-accessible	An entry contains information for one domain. A domain is a group of object instances which defines the scope a role for for a user. Each login user is associated with a single domain.
STR csOrionSystemLoginDomainInterfaceList	1.3.6.1.4.1.3085.3.1.2.3.3.1.4	LongDisplayString	read-create	List of interfaces which an user can access. The interfaces in the list are separated either by space(s). Each interface is represented as follows: [/[:channel-range>[:]]] where each range above has the follog syntax: = { * \| \| - } If the optional elements (,,etc) are not specified they default to '', which denotes all values. is always less than . If '' or range is specified for an element then all following elements MUST be wildcard enrtries The chassis as an interface can also be included in the list and is represented by the key-word 'chassis' Valid interface examples: * - same as /// 5-6/* chassis 5/3-5/* 5/3/2-4 Invalid interface Eg: 5/*/3
STR csOrionSystemLoginDomainName	1.3.6.1.4.1.3085.3.1.2.3.3.1.1	DisplayString	not-accessible	The name of an access domain.
ROW csOrionSystemLoginDomainRowStatus	1.3.6.1.4.1.3085.3.1.2.3.3.1.5	RowStatus	read-create	A row status type for the table entry.
csOrionSystemLoginDomainTable	1.3.6.1.4.1.3085.3.1.2.3.3		not-accessible	A domain for a login user.
STR csOrionSystemLoginDomainVRList	1.3.6.1.4.1.3085.3.1.2.3.3.1.3	LongDisplayString	read-create	A list of VPN/VRs a user can access. A VPN/VR is represented as /. The VPN/VRs in the list are separated either by a space(s). The following are valid wildcards for a VR: /* : All VRs with the given VPN. / : All VRs. If it used then it should be the only entry in the list.
csOrionSystemLoginPermEntry	1.3.6.1.4.1.3085.3.1.2.3.4.1		not-accessible	An entry contains information for one login user permission.
ROW csOrionSystemLoginPermRowStatus	1.3.6.1.4.1.3085.3.1.2.3.4.1.1	RowStatus	read-create	A row status type for the table entry.
csOrionSystemLoginPermTable	1.3.6.1.4.1.3085.3.1.2.3.4		not-accessible	Access permissions for a login user. A permission id represented as a :. A user can have multiple permissions.
OCT csOrionSystemLoginRoleAccessRights	1.3.6.1.4.1.3085.3.1.2.3.2.1.3	OCTET STRING	read-create	Access rights of a role are a list of feature-wise permissions. The permissions of a feature are represented by a 4-byte tuple {rights (1-byte),featureid(3-bytes)}. The features in this list are in the ascending order of their feature-id. rights: Access rights are classified into the following categories (given below along with the mapping to unix-style read,write and execute permissions): 0 : none (rwx-style = ---) 1 : all (rwx-style = rwx) 2 : view (rwx-style = r--) 3 : config (rwx-style = rw-) 4 : monitor (rwx-style = r-x) Feature-id's: A feature is a set of commands which are grouped into a read, write or execute command-type. all (1), access (2), clear (3), device (4), dialup (5), diff_serve (6), event_log (7), field (8), firewall (9), froip (10), nat (11), routing (12), service_selection (13), show (14), tunnel (15), vpnvr (16)
STR csOrionSystemLoginRoleDesc	1.3.6.1.4.1.3085.3.1.2.3.2.1.2	DisplayString	read-create	Information about the role.
csOrionSystemLoginRoleEntry	1.3.6.1.4.1.3085.3.1.2.3.2.1		not-accessible	An entry contains information for one role type. A role is a group of feature access permissions. Each login user is associated with a single role.
STR csOrionSystemLoginRoleName	1.3.6.1.4.1.3085.3.1.2.3.2.1.1	DisplayString	not-accessible	The name of a role.
ROW csOrionSystemLoginRoleRowStatus	1.3.6.1.4.1.3085.3.1.2.3.2.1.4	RowStatus	read-create	A row status type for the table entry.
csOrionSystemLoginRoleTable	1.3.6.1.4.1.3085.3.1.2.3.2		not-accessible	A role for a login user.
INT csOrionSystemLoginServer	1.3.6.1.4.1.3085.3.1.2.3.5	INTEGER	read-write	When this object is set to remote, a remote authentication server (csOrionSystemLoginServerListName) will be used to authenticate a user logging into a CLI session. When this object is set to localDatabase, the password file residing locally will be used to authenticate the CLI user.
STR csOrionSystemLoginServerListName	1.3.6.1.4.1.3085.3.1.2.3.6	DisplayString	read-write	The name of the server list to use for remote authentication, if no list is specified then the server specified in the default server list is used. Cli authentication uses the server list and default servers configured on the system virtual router.
STR csOrionSystemLoginUserDesc	1.3.6.1.4.1.3085.3.1.2.3.1.1.2	DisplayString	read-create	User information
csOrionSystemLoginUserEntry	1.3.6.1.4.1.3085.3.1.2.3.1.1		not-accessible	An entry contains information for one CLI login user.
STR csOrionSystemLoginUserName	1.3.6.1.4.1.3085.3.1.2.3.1.1.1	DisplayString	not-accessible	The login user name.
OPE csOrionSystemLoginUserOperStatus	1.3.6.1.4.1.3085.3.1.2.3.1.1.5	OperStatus	read-only	A operational status for this table entry.
STR csOrionSystemLoginUserPassword	1.3.6.1.4.1.3085.3.1.2.3.1.1.3	DisplayString	read-create	A sequence of alphabetical and numerical characters, MUST not be less than 8 characters.
ROW csOrionSystemLoginUserRowStatus	1.3.6.1.4.1.3085.3.1.2.3.1.1.4	RowStatus	read-create	A row status type for the table entry.
csOrionSystemLoginUserTable	1.3.6.1.4.1.3085.3.1.2.3.1		not-accessible	A login information for Orion, using console or telnet.
STR csOrionSystemMajorVer	1.3.6.1.4.1.3085.3.1.2.1.5	DisplayString	read-only	The version for a Orion as a system.
IP csOrionSystemNetMask	1.3.6.1.4.1.3085.3.1.2.1.2	IpAddress	read-write	A system network mask.
I32 csOrionSystemNumberOfBlades	1.3.6.1.4.1.3085.3.1.2.1.6	Integer32	read-only
INT csOrionSystemReset	1.3.6.1.4.1.3085.3.1.2.1.8	INTEGER	read-write	The software reset. It is an action object such that when set to 'reset' will reset all the blades. Setting it to 'none' has no effect, and when it is retrieved the value will always be 'none' .
INT csOrionSystemShutdown	1.3.6.1.4.1.3085.3.1.2.1.11	INTEGER	read-write	The software shutdown. It is an action object such that when set to 'shutdown' will stop the file-system of all the blades. that when set to 'shutdown' will stop the file-system of all the blades. Setting it to 'none' has no effect, and when it is retrieved the value will always be 'none' .
INT csOrionSystemTempStatus	1.3.6.1.4.1.3085.3.1.2.1.7	INTEGER	read-only	This object identifies the current temperature status within the Orion system. If this object has the value normal(1), the temperature is within the normal range. If the status is hot(2), the temperature is above the normal range and measures should be taken to bring the temperature down.
STR csOrionSystemTime	1.3.6.1.4.1.3085.3.1.2.1.9	DisplayString	read-write	To set the system date & time with the standard format specified by RFC 2579. Below is the date-time specification. (Display Format: YYYY-MM-DD,HH:MM:SS.ss,+/-:HH:MM) field contents range ----- -------- ----- 1 year* 1999..2098 2 month 1..12 3 day 1..31 4 hour 0..23 5 minutes 0..59 6 seconds 0..60 (use 60 for leap-second) 7 deci-seconds 0..9 8 direction from UTC '+' / '-' 9 hours from UTC* 0..13 10 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - daylight saving time in New Zealand is +13 For example, Tuesday May 26, 2000 at 1:30:15 PM EDT would be displayed as: 2000-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present.
STR csOrionSystemVersionNum	1.3.6.1.4.1.3085.3.1.2.1.10	DisplayString	read-only	The system version number applies to the IPSX system as a whole. This number has the format: a.b.c.d where 'a.b' is major release number, 'c' is the patch nubmer, and 'd' is the internal release number.
csOrionTcp	1.3.6.1.4.1.3085.3.1.4.2.6
I32 csOrionTcpEnd	1.3.6.1.4.1.3085.3.1.4.2.6.3	Integer32	read-only	End of this group. value undefined
INT csOrionTempAirFlowCard	1.3.6.1.4.1.3085.3.1.13.12	INTEGER	accessible-for-notify	The temperature/airflow sense card for which we are resporting an event. Note there is only one temperature/airflow sense card on 3500 chassis.
csOrionTempAirFlowCardEntry	1.3.6.1.4.1.3085.3.1.7.7.1.1		not-accessible	An entry containing management information applicable to temperature air flow card.
csOrionTempAirFlowCardTable	1.3.6.1.4.1.3085.3.1.7.7.1		not-accessible	A table for temperature air flow card.
INT csOrionTemperature	1.3.6.1.4.1.3085.3.1.13.6	INTEGER	accessible-for-notify	The temperature reported by a temperature sensor.
csOrionTemperatureAirFlowCardInfo	1.3.6.1.4.1.3085.3.1.7.7
INT csOrionTemperatureEvent	1.3.6.1.4.1.3085.3.1.13.2	INTEGER	accessible-for-notify	A fan event. Note that the first four event types apply to analog temperature sensors (for example, those used to measure inlet and outlet air flow temperature), and the last two apply to digital temperature sensors (for example, those in the power supplies).
INT csOrionTemperatureSensorIndex	1.3.6.1.4.1.3085.3.1.13.5	INTEGER	accessible-for-notify	Identifies a particular temperature sensor.
INT csOrionTemperatureThreshold	1.3.6.1.4.1.3085.3.1.13.7	INTEGER	accessible-for-notify	The temperature threshold (in degress celsius).
NTF csOrionTempStatusChange	1.3.6.1.4.1.3085.3.1.1.1.6			This trap indicates that the temperature status of the Orion system has changed states. If the value of csOrionSystemTempStatus is tempRisingAboveUpperCriticalThreshold(1), the given sensor has detected a transition from the normal temperature range to the hot range. If the value of csOrionSystemTempStatus is tempFallingBelow- UpperCriticalThreshold (2), the given sensor has detected a transition from the 'hot' range back down to the normal range.
csOrionTraceRoute	1.3.6.1.4.1.3085.3.1.4.2.1.4
I32 csOrionTraceRouteEnd	1.3.6.1.4.1.3085.3.1.4.2.1.4.3	Integer32	read-only	End of this group. value undefined
IP csOrionTraceRouteReqDestAddr	1.3.6.1.4.1.3085.3.1.4.2.1.4.1.1.2	IpAddress	read-create	The destination host for the Trace Route operation. Must be set for request to be processed.
csOrionTraceRouteReqEntry	1.3.6.1.4.1.3085.3.1.4.2.1.4.1.1		not-accessible	An entry of Trace Route Request Table.
I32 csOrionTraceRouteReqHops	1.3.6.1.4.1.3085.3.1.4.2.1.4.1.1.3	Integer32	read-create	Maximum number of hops to reach destination host.
I32 csOrionTraceRouteReqIndex	1.3.6.1.4.1.3085.3.1.4.2.1.4.1.1.1	Integer32	not-accessible	This object identifies a specific Trace Route request entry. NMSs are expected to come up with a unique ID each request. This ID will also be used to index the Trace Route result entry.
ROW csOrionTraceRouteReqRowStatus	1.3.6.1.4.1.3085.3.1.4.2.1.4.1.1.6	RowStatus	read-create	The RowStatus object for this table. This is used to add/delete rows from this table.
IP csOrionTraceRouteReqSrcAddr	1.3.6.1.4.1.3085.3.1.4.2.1.4.1.1.4	IpAddress	read-create	The source host for the Trace Route operation.
INT csOrionTraceRouteReqStatus	1.3.6.1.4.1.3085.3.1.4.2.1.4.1.1.5	INTEGER	read-only	This object is used to store the status of the Trace Route request. operation. The csOrionTraceRouteResultTable should only be evaluated after this object yields opSuccess(3).
csOrionTraceRouteReqTable	1.3.6.1.4.1.3085.3.1.4.2.1.4.1		not-accessible	Trace Route Request Table.
csOrionTraceRouteResultEntry	1.3.6.1.4.1.3085.3.1.4.2.1.4.2.1		not-accessible	An entry of Trace Route Result Table. Each hop taken during the trace route operation corresponds to an entry in csOrionTraceRouteResultEntry. Additional 'getnext' is expected to obtain the succeeding hops. We will add objects in this table as we expose more trace route info.
IP csOrionTraceRouteResultHopAddr	1.3.6.1.4.1.3085.3.1.4.2.1.4.2.1.6	IpAddress	read-only	The host address of this hop.
I32 csOrionTraceRouteResultHopNum	1.3.6.1.4.1.3085.3.1.4.2.1.4.2.1.2	Integer32	read-only	Hop number for this result.
I32 csOrionTraceRouteResultIndex	1.3.6.1.4.1.3085.3.1.4.2.1.4.2.1.1	Integer32	not-accessible	This object identifies a specific File System result entry. This index corresponds to the ID provided by NMSs on File System request.
OCT csOrionTraceRouteResultMplsLabelStackInfo	1.3.6.1.4.1.3085.3.1.4.2.1.4.2.1.7	OCTET STRING	read-only	Returns mpls label stack information that was encoded in the icmp error message. The values returned in this string are formatted to include mpls-label, exp-bits, s-bit, and ttl values for the entire label stack. If the router generating icmp message does not support icmp extensions for mpls, then this string will not contain any information (null string)
I32 csOrionTraceRouteResultRtt1	1.3.6.1.4.1.3085.3.1.4.2.1.4.2.1.3	Integer32	read-only	This is the round trip time for the 1st probe on this hop.
I32 csOrionTraceRouteResultRtt2	1.3.6.1.4.1.3085.3.1.4.2.1.4.2.1.4	Integer32	read-only	This is the round trip time for the 2nd probe on this hop.
I32 csOrionTraceRouteResultRtt3	1.3.6.1.4.1.3085.3.1.4.2.1.4.2.1.5	Integer32	read-only	This is the round trip time for the 3rd probe on this hop.
csOrionTraceRouteResultTable	1.3.6.1.4.1.3085.3.1.4.2.1.4.2		not-accessible	Trace Route Result Table. The object csOrionTraceRouteReqStatus should be evaluated before obtaing the results from this table.
csOrionTrapInfo	1.3.6.1.4.1.3085.3.1.9.2
I32 csOrionTrapPowerSupplyIndex	1.3.6.1.4.1.3085.3.1.13.16	Integer32	accessible-for-notify	An index for the power supply to be used in power supply trap.
IP csOrionTrapReceiverAddr	1.3.6.1.4.1.3085.3.1.9.2.2.1.2	IpAddress	not-accessible	IP address for trap receiver.
STR csOrionTrapReceiverComm	1.3.6.1.4.1.3085.3.1.9.2.2.1.1	DisplayString	not-accessible	Community string used for trap messages to this trap receiver.
csOrionTrapReceiverEntry	1.3.6.1.4.1.3085.3.1.9.2.2.1		not-accessible	A trap receiver table entry.
I32 csOrionTrapReceiverPort	1.3.6.1.4.1.3085.3.1.9.2.2.1.4	Integer32	read-create	UDP port number for trap receiver. By default, all traps are sent to Port 162.
ROW csOrionTrapReceiverRowStatus	1.3.6.1.4.1.3085.3.1.9.2.2.1.3	RowStatus	read-create	A row status type for the Trap Receiver Table. This object is used to add or remove entries from this table.
csOrionTrapReceiverTable	1.3.6.1.4.1.3085.3.1.9.2.2		not-accessible	The trap receiver table (0 to 25 entries). This table lists the addresses of stations that should receive trap messages from this entity when an exception condition occurs.
INT csOrionTrapReceiverTrapType	1.3.6.1.4.1.3085.3.1.9.2.2.1.5	INTEGER	read-create	The trap type, which the Receiver wish to receive from this managed entity. By default, v2 inform request type is used to notify traps.
OCT csOrionTunnelSwitchClientName	1.3.6.1.4.1.3085.3.1.6.13.6.1.1	OCTET STRING	not-accessible	This object identifies the client name of the originating tunnel.
csOrionTunnelSwitchEntry	1.3.6.1.4.1.3085.3.1.6.13.6.1		not-accessible	to do...
INT csOrionTunnelSwitchMode	1.3.6.1.4.1.3085.3.1.6.13.6.1.2	INTEGER	read-create	This object determines the switching action.
ROW csOrionTunnelSwitchRowStatus	1.3.6.1.4.1.3085.3.1.6.13.6.1.3	RowStatus	read-create	.
csOrionTunnelSwitchTable	1.3.6.1.4.1.3085.3.1.6.13.6		not-accessible	to do...
csOrionTunnelSwitchTargetEntry	1.3.6.1.4.1.3085.3.1.6.13.7.1		not-accessible	.
IP csOrionTunnelSwitchTargetIpAddress	1.3.6.1.4.1.3085.3.1.6.13.7.1.1	IpAddress	not-accessible	This object identifies the IP address of the destination LNS.
I32 csOrionTunnelSwitchTargetMaxSession	1.3.6.1.4.1.3085.3.1.6.13.7.1.3	Integer32	read-create	This object determines the maximum number of sessions that can be handled by this target address.
I32 csOrionTunnelSwitchTargetPriority	1.3.6.1.4.1.3085.3.1.6.13.7.1.2	Integer32	read-create	This object determines the priority of this target address. Priority value 1 being the highest.
ROW csOrionTunnelSwitchTargetRowStatus	1.3.6.1.4.1.3085.3.1.6.13.7.1.5	RowStatus	read-create	Row status for this table.
C32 csOrionTunnelSwitchTargetSessionCount	1.3.6.1.4.1.3085.3.1.6.13.7.1.4	Counter32	read-only	This object keeps the count of the active sessions on this target address.
csOrionTunnelSwitchTargetTable	1.3.6.1.4.1.3085.3.1.6.13.7		not-accessible	.
csOrionUdp	1.3.6.1.4.1.3085.3.1.4.2.7
I32 csOrionUdpEnd	1.3.6.1.4.1.3085.3.1.4.2.7.3	Integer32	read-only	End of this group. value undefined
I32 csOrionViDsByteFilterAclId	1.3.6.1.4.1.3085.3.1.6.14.1.2.1.2	Integer32	read-create	The Id of an access list entry (from csOrionGenAclTable). All packets transmitted or received on this virtual interface that access list entry are acted upon by this filter.
INT csOrionViDsByteFilterAction	1.3.6.1.4.1.3085.3.1.6.14.1.2.1.3	INTEGER	read-create	The action performed by this filter.
INT csOrionViDsByteFilterDirection	1.3.6.1.4.1.3085.3.1.6.14.1.2.1.5	INTEGER	read-create	The direction of packets on which this filter is applied.
csOrionViDsByteFilterEntry	1.3.6.1.4.1.3085.3.1.6.14.1.2.1		not-accessible	Each filter specifies whether packets satisfying a specific access list entry are permitted or denied to be passed along their route.
I32 csOrionViDsByteFilterIndex	1.3.6.1.4.1.3085.3.1.6.14.1.2.1.1	Integer32	not-accessible	The Index of this particular Packet Filter.
ROW csOrionViDsByteFilterRowStatus	1.3.6.1.4.1.3085.3.1.6.14.1.2.1.6	RowStatus	read-create	A row status type for this Table entry.
csOrionViDsByteFilterTable	1.3.6.1.4.1.3085.3.1.6.14.1.2		not-accessible	This table specifies a set of acl's to be applied to packets received over (or sent out) each the interfaces belonging to this virtual router. The first entry whose acl matches a packet causes the DS Byte field of the packet to be set to the value specified in the table entry. If no entry's acl matches the packet, the DS Byte field of the packet will be set to the value specified in csOrionVPNVRouterIpDsByte.
I32 csOrionViDsByteFilterValue	1.3.6.1.4.1.3085.3.1.6.14.1.2.1.4	Integer32	read-create	This object defines the values to be placed in the TypeOfService octet of each IP packet sent out or forwarded by the VR. The valid range covers both 7-bit configurations recommended in RFC 1349 (Precedence and TOS bits) and 6-bit configurations recommended in RFC 2474 (Differentiated Services). If the value selected is 256, the DsByte is not changed and packets are forwarded with their existing TypeOfService byte value.
csOrionVIfaceEntry	1.3.6.1.4.1.3085.3.1.4.2.2.1.1		not-accessible	An entry containing management information applicable to a particular virtual router, configured for the VPN.
csOrionVIfaceTable	1.3.6.1.4.1.3085.3.1.4.2.2.1		not-accessible	A list of Virtual Interfaces, configured for the Virtual Router.
INT csOrionVIfBcastAddr	1.3.6.1.4.1.3085.3.1.4.2.2.1.1.7	INTEGER	read-create	The value of the least-significant bit in the IP broadcast address used for sending datagrams on this Virtual Interface. For example, when the Internet standard all-ones broadcast address is used, the value will be 1. This value applies to both the subnet and network broadcasts addresses used by the entity on this (logical) interface.
STR csOrionVIfCryptoMapName	1.3.6.1.4.1.3085.3.1.4.2.2.1.1.13	DisplayString	read-create	A Crypto Map name for the Virtual Interface.
NTF csOrionVIfDown	1.3.6.1.4.1.3085.3.1.1.1.10			A csOrionVIfDown trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the csOrionVIfOperStatus object for one of its communication links is about to enter the down state from some other state (but not from the notPresent state). This other state is indicated by the included value of csOrionVIfOperStatus.
INT csOrionVIfFrameType	1.3.6.1.4.1.3085.3.1.4.2.2.1.1.9	INTEGER	read-create	The frame type used on this Virtual Interface.
I32 csOrionVIfIndex	1.3.6.1.4.1.3085.3.1.4.2.2.1.1.1	Integer32	read-only	A unique value, greater than zero, for each VPN Virtual Interface.
csOrionVIfInfo	1.3.6.1.4.1.3085.3.1.4.2.2
IP csOrionVIfIpAddress	1.3.6.1.4.1.3085.3.1.4.2.2.1.1.5	IpAddress	read-create	The primary IP Address assigned to this Virtual Interface
IP csOrionVIfIpMask	1.3.6.1.4.1.3085.3.1.4.2.2.1.1.6	IpAddress	read-create	The primary IP Address Mask assigned to this Virtual Interface
TIK csOrionVIfLastChange	1.3.6.1.4.1.3085.3.1.4.2.2.1.1.12	TimeTicks	read-only	The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization of the local network management subsystem, then this object contains a zero value.
I32 csOrionVIfMtu	1.3.6.1.4.1.3085.3.1.4.2.2.1.1.8	Integer32	read-create	The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface.
I32 csOrionVIfMtuOperational	1.3.6.1.4.1.3085.3.1.4.2.2.1.1.22	Integer32	read-only	Operational size of the largest datagram which can be sent/received on the interface, specified in octets.
OPE csOrionVIfOperStatus	1.3.6.1.4.1.3085.3.1.4.2.2.1.1.15	OperStatus	read-only	A operational status for the Virtual Iface.
I32 csOrionVIfRateLimitBurstSize	1.3.6.1.4.1.3085.3.1.4.2.2.1.1.19	Integer32	read-create	The largest burst of data above the commited rate that will be allowed temporarily by the VI, even if it exceeds the maximum rate. This amount of traffic will be allowed only temporarily; on average, the traffice source need to be within the committed rate.
I32 csOrionVIfRateLimitInterval	1.3.6.1.4.1.3085.3.1.4.2.2.1.1.17	Integer32	read-create	The interval, in milliseconds, over which the number of bytes forwared over this interface is measured when rate-limiting is being done. The rate-limit interval is always a multiple of 10. This field has no meaning when 'csOrionVIfRate LimitNumBytes' is '0'. When 'csOrionVIfRateLimit- NumBytes' is specified, this field must also be specified.
I32 csOrionVIfRateLimitNumBytes	1.3.6.1.4.1.3085.3.1.4.2.2.1.1.16	Integer32	read-create	The number of bytes that may be forwarded on this interface in the interval specified by 'csOrionVIfRateLimitInterval'. A value of 0 indicates that no rate-limiting is done. When this field is specified, 'csOrionVIfRateLimit- Interval' must also be specified.
I32 csOrionVIfRateLimitRate	1.3.6.1.4.1.3085.3.1.4.2.2.1.1.18	Integer32	read-create	Long term data throughput, in bytes per second, that the VI commits to support under normal network conditions.
IP csOrionVIfRemIpAddress	1.3.6.1.4.1.3085.3.1.4.2.2.1.1.20	IpAddress	read-create	The remote IP Address assigned to this Virtual Interface
INT csOrionVIfRemIpAddressType	1.3.6.1.4.1.3085.3.1.4.2.2.1.1.21	INTEGER	read-create	If value is configured, it means csOrionVIfRemIpAddress is configured , else, it is dynamically learned.
STR csOrionVIfRemoteEnd	1.3.6.1.4.1.3085.3.1.4.2.2.1.1.4	DisplayString	read-create	This object is used to identify the entity to which this Virtual Interface maps. That is, the remote end of this Virtual Interface. The format used for this ascii-string valued object is as follows: 'V\|L VPNID\|SlotID/VRID\|PortID/VIID\|LLID' Where 'V' indicates the other end of this Virtual Interface is another Virtual Interface. 'L' indicates this Virtual Interface maps to a Logical Link. 'VPNID' is a Virtual Private Network ID. 'SlotID' identifies a specific slot on the Orion Box. 'VRID' is a Virtual Router ID for the VPN specified by VPNID. 'PortID' identifies a specific Port on the blade installed in the previously identified slot. 'VIID' is a Virtual Interface on the VR identified by VRID. 'LLID' is a Logical Link ID on PortID. For example, if this Virtual Interface maps to another Virtual Interface (VI number 1 on VR 1.2.3.4 on VPN 4), this object might be set to this value: 'V 4/1.2.3.4/1' If this Virtual Interface maps to Logical Link 100 on Port 2 of Slot 2, this object might be set to this value: 'L 2/2:100' If this Virtual Interface has not been mapped, this object will have the value 'DISCONNECTED'.
ROW csOrionVIfRowStatus	1.3.6.1.4.1.3085.3.1.4.2.2.1.1.14	RowStatus	read-create	A row status type for the Virtual Interface.
G32 csOrionVIfSpeed	1.3.6.1.4.1.3085.3.1.4.2.2.1.1.11	Gauge32	read-create	An estimate of the interface's current bandwidth in bits per second. If the remote end of this Virtual Interface is a Logical Link, the speed is based on the Logical Link's speed and does not need to be configured. If the remote end is another Virtual Interface, the speed is based on SLA agreements and needs to be configured. NOTE: This object is currently not supported and will always contain the value 0.
INT csOrionVIfType	1.3.6.1.4.1.3085.3.1.4.2.2.1.1.10	INTEGER	read-create	This indicates whether this Virtual Interface is of type public or private.
NTF csOrionVIfUp	1.3.6.1.4.1.3085.3.1.1.1.11			A csOrionVIfUp trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links left the down state and transitioned into some other state (but not into the notPresent state). This other state is indicated by the included value of ifOperStatus.
I32 csOrionViPbfFilterAclId	1.3.6.1.4.1.3085.3.1.4.2.12.1.1.2	Integer32	read-create	The Id of an access list entry (from csOrionGenAclTable).
INT csOrionViPbfFilterAction	1.3.6.1.4.1.3085.3.1.4.2.12.1.1.5	INTEGER	read-create	The action performed by this filter.
INT csOrionViPbfFilterCounter	1.3.6.1.4.1.3085.3.1.4.2.12.1.1.7	INTEGER	read-create	Enable or disable counter on this filter.
I32 csOrionViPbfFilterEgressViId	1.3.6.1.4.1.3085.3.1.4.2.12.1.1.3	Integer32	read-create	The index value to uniquely identify the local interface through which the next hop for matching flows should be reached. This field is valid for VIs connected to point-point links only. A value of 0 (zero) indicates the next-hop-vi is not specified.
csOrionViPbfFilterEntry	1.3.6.1.4.1.3085.3.1.4.2.12.1.1		not-accessible	Each filter specifies whether packets matching a specific access list entry are forwarded to the specified next hop.
I32 csOrionViPbfFilterIndex	1.3.6.1.4.1.3085.3.1.4.2.12.1.1.1	Integer32	not-accessible	The Index of this particular PBF Filter.
IP csOrionViPbfFilterNextHopIpAddr	1.3.6.1.4.1.3085.3.1.4.2.12.1.1.4	IpAddress	read-create	The IP address of the next hop of this route. A value of 0 (zero) indicates the next-hop-addr is not specified.
ROW csOrionViPbfFilterRowStatus	1.3.6.1.4.1.3085.3.1.4.2.12.1.1.6	RowStatus	read-create	A row status type for this Table entry.
csOrionViPbfFilterTable	1.3.6.1.4.1.3085.3.1.4.2.12.1		not-accessible	This table specifies a set of acl's to be applied to packets received over an interface. The first entry whose ACL matches a packet causes the packet to be forwarded over the specified next-hop.
I32 csOrionViPktFilterAclId	1.3.6.1.4.1.3085.3.1.6.3.2.1.2	Integer32	read-create	The Id of an access list entry (from csOrionGenAclTable). All packets transmitted or received on this virtual interface that access list entry are acted upon by this filter.
INT csOrionViPktFilterAction	1.3.6.1.4.1.3085.3.1.6.3.2.1.3	INTEGER	read-create	The action performed by this filter.
INT csOrionViPktFilterCounterStatus	1.3.6.1.4.1.3085.3.1.6.3.2.1.8	INTEGER	read-create	The status of csOrionViPktFilterHitCounter. Will also be enabled as a result of enabling csOrionViPktFilterEvlogStatus.
INT csOrionViPktFilterDirection	1.3.6.1.4.1.3085.3.1.6.3.2.1.4	INTEGER	read-create	The direction of packets on which this filter is applied.
csOrionViPktFilterEntry	1.3.6.1.4.1.3085.3.1.6.3.2.1		not-accessible	Each filter specifies whether packets satisfying a specific access list entry are permitted or denied to be passed along their route.
INT csOrionViPktFilterEvlogStatus	1.3.6.1.4.1.3085.3.1.6.3.2.1.9	INTEGER	read-create	If enabled, event logs will be sent when a packet hits this packet filter. Will also result to csOrionViPktFilterCounterStatus reset and enabled.
C64 csOrionViPktFilterHitCounter	1.3.6.1.4.1.3085.3.1.6.3.2.1.7	Counter64	read-only	When csOrionViPktFilterHitCounter is enabled, the counter be incremented everytime a packet that corresponds to the packet filter is received.
I32 csOrionViPktFilterIndex	1.3.6.1.4.1.3085.3.1.6.3.2.1.1	Integer32	not-accessible	The Index of this particular Packet Filter.
ROW csOrionViPktFilterRowStatus	1.3.6.1.4.1.3085.3.1.6.3.2.1.5	RowStatus	read-create	A row status type for this Table entry.
csOrionViPktFilterTable	1.3.6.1.4.1.3085.3.1.6.3.2		not-accessible	This table specifies a set of filters to be applied to packets received over this virtual interface. Filters can be configured either to permit a packet, deny a packet, or send the packet to a firewall proxy.
INT csOrionViPktFilterTcpStatus	1.3.6.1.4.1.3085.3.1.6.3.2.1.6	INTEGER	read-create	The state of the TCP.
I32 csOrionViQoSFilterAclId	1.3.6.1.4.1.3085.3.1.6.22.4.1.2	Integer32	not-accessible	The ACL id is the index to this table. Prior to using this, the ACL with index equal to this object value must be created
csOrionViQoSFilterEntry	1.3.6.1.4.1.3085.3.1.6.22.4.1		not-accessible	Metering context entries
I32 csOrionViQoSFilterIndex	1.3.6.1.4.1.3085.3.1.6.22.4.1.1	Integer32	not-accessible	index to this table.
STR csOrionViQoSFilterMeterName	1.3.6.1.4.1.3085.3.1.6.22.4.1.3	DisplayString	read-create	This specifies which of the metering profile(template) to apply to this metering block
INT csOrionViQoSFilterServiceCategory	1.3.6.1.4.1.3085.3.1.6.22.4.1.4	INTEGER	read-create	Priority with which the traffic is sent out
ROW csOrionViQoSFilterStatus	1.3.6.1.4.1.3085.3.1.6.22.4.1.5	RowStatus	read-create	Creates or deletes the profile
csOrionViQoSFilterTable	1.3.6.1.4.1.3085.3.1.6.22.4		not-accessible	This table specifies the metering control block for each of the traffic flows
csOrionViStatsEntry	1.3.6.1.4.1.3085.3.1.4.2.2.2.1		not-accessible	A Set of statistics for a single Virtual Interface.
C64 csOrionViStatsInDiscards	1.3.6.1.4.1.3085.3.1.4.2.2.2.1.4	Counter64	read-only	The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.
C64 csOrionViStatsInErrors	1.3.6.1.4.1.3085.3.1.4.2.2.2.1.5	Counter64	read-only	The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.
C64 csOrionViStatsInNUcastPkts	1.3.6.1.4.1.3085.3.1.4.2.2.2.1.3	Counter64	read-only	The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a non-unicast address at this sub-layer.
C64 csOrionViStatsInOctets	1.3.6.1.4.1.3085.3.1.4.2.2.2.1.1	Counter64	read-only	The total number of octets received on the interface, including framing characters.
C64 csOrionViStatsInUcastPkts	1.3.6.1.4.1.3085.3.1.4.2.2.2.1.2	Counter64	read-only	The number of subnetwork-unicast packets delivered to a higher-layer protocol.
C64 csOrionViStatsInUnknownProtos	1.3.6.1.4.1.3085.3.1.4.2.2.2.1.6	Counter64	read-only	The number of packets received via the interface which were discarded because of an unknown or unsupported protocol.
C64 csOrionViStatsOutDiscards	1.3.6.1.4.1.3085.3.1.4.2.2.2.1.10	Counter64	read-only	The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.
C64 csOrionViStatsOutErrors	1.3.6.1.4.1.3085.3.1.4.2.2.2.1.11	Counter64	read-only	The number of outbound packets that could not be transmitted because of errors.
C64 csOrionViStatsOutNUcastPkts	1.3.6.1.4.1.3085.3.1.4.2.2.2.1.9	Counter64	read-only	The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a non-unicast address at this sub-layer, including those that were discarded or not sent.
C64 csOrionViStatsOutOctets	1.3.6.1.4.1.3085.3.1.4.2.2.2.1.7	Counter64	read-only	The total number of octets transmitted out of the interface, including framing characters.
C64 csOrionViStatsOutUcastPkts	1.3.6.1.4.1.3085.3.1.4.2.2.2.1.8	Counter64	read-only	The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent.
C64 csOrionViStatsRateLimitRxBytesDropped	1.3.6.1.4.1.3085.3.1.4.2.2.2.1.18	Counter64	read-only	When rate limiting is enabled, the number of receive packets dropped...
C64 csOrionViStatsRateLimitRxBytesSubmitted	1.3.6.1.4.1.3085.3.1.4.2.2.2.1.16	Counter64	read-only	When rate limiting is enabled, the number of receive packets submitted...
C64 csOrionViStatsRateLimitRxPktsDropped	1.3.6.1.4.1.3085.3.1.4.2.2.2.1.19	Counter64	read-only	When rate limiting is enabled, the number of receive packets dropped...
C64 csOrionViStatsRateLimitRxPktsSubmitted	1.3.6.1.4.1.3085.3.1.4.2.2.2.1.17	Counter64	read-only	When rate limiting is enabled, the number of receive packets submitted...
C64 csOrionViStatsRateLimitTimeElapsed	1.3.6.1.4.1.3085.3.1.4.2.2.2.1.20	Counter64	read-only	The number of seconds that have elapsed since the beginning of the current rate-limiting measurement period.
C64 csOrionViStatsRateLimitTxBytesDropped	1.3.6.1.4.1.3085.3.1.4.2.2.2.1.14	Counter64	read-only	When rate limiting is enabled, the number of transmit bytes dropped...
C64 csOrionViStatsRateLimitTxBytesSubmitted	1.3.6.1.4.1.3085.3.1.4.2.2.2.1.12	Counter64	read-only	When rate limiting is enabled, the number of transmit bytes submitted...
C64 csOrionViStatsRateLimitTxPktsDropped	1.3.6.1.4.1.3085.3.1.4.2.2.2.1.15	Counter64	read-only	When rate limiting is enabled, the number of transmit packets dropped...
C64 csOrionViStatsRateLimitTxPktsSubmitted	1.3.6.1.4.1.3085.3.1.4.2.2.2.1.13	Counter64	read-only	When rate limiting is enabled, the number of transmit packets submitted...
csOrionViStatsTable	1.3.6.1.4.1.3085.3.1.4.2.2.2		not-accessible	A list of Virtual Interfaces Statistics
I32 csOrionVncQueueAclId	1.3.6.1.4.1.3085.3.1.6.6.1.1.2	Integer32	not-accessible	The Id of an access list entry (from csOrionGenAclTable). All packets transmitted on this virtual that satisfy that access list entry are placed in this queue.
csOrionVncQueueEntry	1.3.6.1.4.1.3085.3.1.6.6.1.1		not-accessible	An entry containing management information applicable to a particular virtual interface's vnc queue.
I32 csOrionVncQueueId	1.3.6.1.4.1.3085.3.1.6.6.1.1.1	Integer32	not-accessible	The Id of this particular queue.
I32 csOrionVncQueueMaxBw	1.3.6.1.4.1.3085.3.1.6.6.1.1.4	Integer32	read-create	The maximum bandwidth allocated to this queue.
I32 csOrionVncQueueMinBw	1.3.6.1.4.1.3085.3.1.6.6.1.1.3	Integer32	read-create	The minimum bandwidth allocated to this queue.
ROW csOrionVncQueueRowStatus	1.3.6.1.4.1.3085.3.1.6.6.1.1.5	RowStatus	read-create	A row status type for this Rate Allocation Queue.
csOrionVncQueueTable	1.3.6.1.4.1.3085.3.1.6.6.1		not-accessible	A list of VNC Queues for each Virtual Interfaces. Each queue is assigned a minimum and maximum bandwidth.
OCT csOrionVpnAcctCompStats	1.3.6.1.4.1.3085.3.1.10.1.1.1.1	OCTET STRING	read-only	Composite stats for this VPN
csOrionVpnAcctEntry	1.3.6.1.4.1.3085.3.1.10.1.1.1		not-accessible	Each entry contains composite stats for a single VPN.
csOrionVpnAcctTable	1.3.6.1.4.1.3085.3.1.10.1.1		not-accessible	This table contains composite stats for each of the VPNs in this Orion.
I32 csOrionVPNDNSSvrList	1.3.6.1.4.1.3085.3.1.4.1.1.1.4	Integer32	read-create	This object identifies a prioritized list of DNS servers (from the csDnsSvrTable) that will be used when a packet needing DNS services is processed. NOTE: This object has been obsoleted.
csOrionVPNEntry	1.3.6.1.4.1.3085.3.1.4.1.1.1		not-accessible	An entry containing management information applicable to a particular interface or management Blade.
csOrionVPNGeneralInfo	1.3.6.1.4.1.3085.3.1.4.1
csOrionVPNInfo	1.3.6.1.4.1.3085.3.1.4
STR csOrionVPNName	1.3.6.1.4.1.3085.3.1.4.1.1.1.2	DisplayString	read-create	A textual string containing information about the VPN. By default this is set to 'VPN x', where x is the VPN ID.
csOrionVPNNotifyInfo	1.3.6.1.4.1.3085.3.1.4.3
OPE csOrionVPNOperStatus	1.3.6.1.4.1.3085.3.1.4.1.1.1.6	OperStatus	read-only	A operational status for the VPN.
I32 csOrionVPNRadiusSvrList	1.3.6.1.4.1.3085.3.1.4.1.1.1.3	Integer32	read-create	This object identifies a prioritized list of RADIUS servers (from the csRadiusSvrTable) that will be used when a packet needing RADIUS services is processed. NOTE: This object has been obsoleted. Each VR has its own Radius server list. see csOrionRadiusInfo
ROW csOrionVPNRowStatus	1.3.6.1.4.1.3085.3.1.4.1.1.1.5	RowStatus	read-create	A row status type for the VPN.
csOrionVPNServerInfo	1.3.6.1.4.1.3085.3.1.4.4
csOrionVPNTable	1.3.6.1.4.1.3085.3.1.4.1.1		not-accessible	A list of VPNs which belong to Orion box.
T/F csOrionVPNVRouterAbortFailOver	1.3.6.1.4.1.3085.3.1.4.2.1.1.1.18	TruthValue	read-write	If the attribute is 'true' then the the VR will be failed over to the backup PE. VR failover actually starts after the the fail-over timer has expired
STR csOrionVPNVRouterBackupPEs	1.3.6.1.4.1.3085.3.1.4.2.1.1.1.16	DisplayString	read-write	This object contains an ascii string which is used to identify backup Pes for the various elements of a Virtual Router. The format of the string is 'a/x, b/y, c/z', where 'a', 'b' and 'c' denote the blade numbers and are integers (1..26); 'x', 'y' and 'z' denote the processor engine (PE) ID and are integers (0..3). Specification of PE is optional.
STR csOrionVPNVRouterCreationTime	1.3.6.1.4.1.3085.3.1.4.2.1.1.1.20	DisplayString	read-only	If the attribute is 'true' then the the VR will be failed over to the backup PE immediately. Setting this attribute makes sense ONLY when csOrionVPNVRouterFailOver is also set
INT csOrionVPNVRouterDenyPktFilterEvlogStatus	1.3.6.1.4.1.3085.3.1.4.2.1.1.1.15	INTEGER	read-create	If enabled, event logs will be sent when a packet hits a packet filter on the VR or on any VI in the VR with a DENY action.
csOrionVPNVRouterEntry	1.3.6.1.4.1.3085.3.1.4.2.1.1.1		not-accessible	An entry containing management information applicable to a particular virtual router, configured for the VPN.
T/F csOrionVPNVRouterFailbackToPrimary	1.3.6.1.4.1.3085.3.1.4.2.1.1.1.19	TruthValue	read-write	If the attribute is 'true' then the the VR will be failback to the Primary PE. Setting this attribute makes sense ONLY when manual VR fail-over failed
T/F csOrionVPNVRouterFailOver	1.3.6.1.4.1.3085.3.1.4.2.1.1.1.17	TruthValue	read-write	If the attribute is 'true' then the the VR will be failed over to the backup PE. VR failover actually starts after the the fail-over timer has expired
IP csOrionVPNVRouterIndex	1.3.6.1.4.1.3085.3.1.4.2.1.1.1.1	IpAddress	read-only	A unique value, greater than zero, for each VPN Virtual Router.
csOrionVPNVRouterInfo	1.3.6.1.4.1.3085.3.1.4.2
csOrionVPNVRouterIpAddrEntry	1.3.6.1.4.1.3085.3.1.4.2.3.2.1		not-accessible	The addressing information for one of this Orion's IP addresses.
csOrionVPNVRouterIpAddrTable	1.3.6.1.4.1.3085.3.1.4.2.3.2		not-accessible	The table of addressing information relevant to Orion's IP addresses.
IP csOrionVPNVRouterIpAdEntAddr	1.3.6.1.4.1.3085.3.1.4.2.3.2.1.1	IpAddress	not-accessible	The IP address to which this entry's addressing information pertains.
I32 csOrionVPNVRouterIpAdEntBcastAddr	1.3.6.1.4.1.3085.3.1.4.2.3.2.1.4	Integer32	read-create	The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. For example, when the Internet standard all-ones broadcast address is used, the value will be 1. This value applies to both the subnet and network broadcasts addresses used by the entity on this (logical) interface.
I32 csOrionVPNVRouterIpAdEntIfIndex	1.3.6.1.4.1.3085.3.1.4.2.3.2.1.2	Integer32	read-only	The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
IP csOrionVPNVRouterIpAdEntNetMask	1.3.6.1.4.1.3085.3.1.4.2.3.2.1.3	IpAddress	read-create	The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
OPE csOrionVPNVRouterIpAdEntOperStatus	1.3.6.1.4.1.3085.3.1.4.2.3.2.1.7	OperStatus	read-only	This object is used to get the current operational status of this row in the IP address table.
I32 csOrionVPNVRouterIpAdEntReasmMaxSize	1.3.6.1.4.1.3085.3.1.4.2.3.2.1.5	Integer32	read-create	The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface.
ROW csOrionVPNVRouterIpAdEntRowStatus	1.3.6.1.4.1.3085.3.1.4.2.3.2.1.6	RowStatus	read-create	This object is used to add a row to the IP address table.
INT csOrionVPNVRouterIpDecTtl	1.3.6.1.4.1.3085.3.1.4.2.1.1.1.12	INTEGER	read-create
I32 csOrionVPNVRouterIpDefaultTTL	1.3.6.1.4.1.3085.3.1.4.2.1.1.1.4	Integer32	read-create	The default value inserted into the Time-To-Live field of the IP header of datagrams originated at this entity, whenever a TTL value is not supplied by the transport layer protocol.
INT csOrionVPNVRouterIpDsByte	1.3.6.1.4.1.3085.3.1.4.2.1.1.1.13	INTEGER	read-create	This object defines the values to be placed in the TypeOfService octet of each IP packet sent out or forwarded by the VR. The valid range covers both 7-bit configurations recommended in RFC 1349 (Precedence and TOS bits) and 6-bit configurations recommended in RFC 2474 (Differentiated Services). If the value selected is 256, the DsByte is not changed and packets are forwarded with their existing TypeOfService byte value. This object can be an IPv4 TOS octet: 0 1 2 3 4 5 6 7 +-----+-----+-----+-----+-----+-----+-----+-----+ \| \| \| \| \| PRECEDENCE \| TOS \| MBZ \| \| \| \| \| +-----+-----+-----+-----+-----+-----+-----+-----+ Precedence (from RFC 791) 111 - Network Control 110 - Internetwork Control 101 - CRITIC/ECP 100 - Flash Override 011 - Flash 010 - Immediate 001 - Priority 000 - Routine TOS (from RFC 1349) 1000 -- minimize delay 0100 -- maximize throughput 0010 -- maximize reliability 0001 -- minimize monetary cost 0000 -- normal service MBZ (must be zero) is unused. Or this object can be a DS field (from RFC 2474): 0 1 2 3 4 5 6 7 +-----+-----+-----+-----+-----+-----+-----+-----+ \| \| \| \| DSCP \| CU \| \| \| \| +-----+-----+-----+-----+-----+-----+-----+-----+ DSCP: differentiated services codepoint CU: currently unused DSCP is used to select the PHB (per-hop behavior) a packet experiences at each node. It is recommended that bits 0-2 of the DSCP field be employed in a manner similar to, or subsuming, the deployed uses of the IP Precedence field of an IPv4 TOS octet to maintain some form of backward compatibility.
INT csOrionVPNVRouterIpForwarding	1.3.6.1.4.1.3085.3.1.4.2.1.1.1.3	INTEGER	read-create	The indication of whether this entity is acting as an IP gateway in respect to the forwarding of datagrams received by, but not addressed to, this entity. IP gateways forward datagrams. IP hosts do not (except those source-routed via the host). Note that for some managed nodes, this object may take on only a subset of the values possible. Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to change this object to an inappropriate value.
C64 csOrionVPNVRouterIpForwDatagrams	1.3.6.1.4.1.3085.3.1.4.2.3.1.1.4	Counter64	read-only	The number of input datagrams for which this entity was not their final IP destination, as a result of which an attempt was made to find a route to forward them to that final destination. In entities which do not act as IP Gateways, this Counter32 will include only those packets which were Source-Routed via this entity, and the Source- Route option processing was successful.
C64 csOrionVPNVRouterIpFragCreates	1.3.6.1.4.1.3085.3.1.4.2.3.1.1.16	Counter64	read-only	The number of IP datagram fragments that have been generated as a result of fragmentation at this entity.
C64 csOrionVPNVRouterIpFragFails	1.3.6.1.4.1.3085.3.1.4.2.3.1.1.15	Counter64	read-only	The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be, e.g., because their Don't Fragment flag was set.
C64 csOrionVPNVRouterIpFragOKs	1.3.6.1.4.1.3085.3.1.4.2.3.1.1.14	Counter64	read-only	The number of IP datagrams that have been successfully fragmented at this entity.
C64 csOrionVPNVRouterIpInAddrErrors	1.3.6.1.4.1.3085.3.1.4.2.3.1.1.3	Counter64	read-only	The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. This count includes invalid addresses (e.g., 0.0.0.0) and addresses of unsupported Classes (e.g., Class E). For entities which are not IP Gateways and therefore do not forward datagrams, this counter includes datagrams discarded because the destination address was not a local address.
C64 csOrionVPNVRouterIpInDelivers	1.3.6.1.4.1.3085.3.1.4.2.3.1.1.7	Counter64	read-only	The total number of input datagrams successfully delivered to IP user-protocols (including ICMP).
C64 csOrionVPNVRouterIpInDiscards	1.3.6.1.4.1.3085.3.1.4.2.3.1.1.6	Counter64	read-only	The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buffer space). Note that this counter does not include any datagrams discarded while awaiting re-assembly.
C64 csOrionVPNVRouterIpInHdrErrors	1.3.6.1.4.1.3085.3.1.4.2.3.1.1.2	Counter64	read-only	The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IP options, etc.
C64 csOrionVPNVRouterIpInReceives	1.3.6.1.4.1.3085.3.1.4.2.3.1.1.1	Counter64	read-only	The total number of input datagrams received from interfaces, including those received in error.
C64 csOrionVPNVRouterIpInUnknownProtos	1.3.6.1.4.1.3085.3.1.4.2.3.1.1.5	Counter64	read-only	The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol.
csOrionVPNVRouterIpNetToMediaEntry	1.3.6.1.4.1.3085.3.1.4.2.3.4.1		not-accessible	The addressing information for one of this Orion's IP addresses.
I32 csOrionVPNVRouterIpNetToMediaIfIndex	1.3.6.1.4.1.3085.3.1.4.2.3.4.1.1	Integer32	not-accessible	The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
IP csOrionVPNVRouterIpNetToMediaNetAddress	1.3.6.1.4.1.3085.3.1.4.2.3.4.1.3	IpAddress	not-accessible	The IpAddress corresponding to the media- dependent `physical' address.
PHY csOrionVPNVRouterIpNetToMediaPhysAddress	1.3.6.1.4.1.3085.3.1.4.2.3.4.1.2	PhysAddress	read-create	The media-dependent `physical' address.
csOrionVPNVRouterIpNetToMediaTable	1.3.6.1.4.1.3085.3.1.4.2.3.4		not-accessible	The table of addressing information relevant to Orion's IP addresses.
INT csOrionVPNVRouterIpNetToMediaType	1.3.6.1.4.1.3085.3.1.4.2.3.4.1.4	INTEGER	read-create	The type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the csOrionVPNVRouterIpNetToMediaTable. That is, it effectively dissasociates the interface identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant csOrionVPNVRouterIpNetToMediaType object.
C64 csOrionVPNVRouterIpOutDiscards	1.3.6.1.4.1.3085.3.1.4.2.3.1.1.9	Counter64	read-only	The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for lack of buffer space). Note that this counter would include datagrams counted in ipForwDatagrams if any such packets met this (discretionary) discard criterion.
C64 csOrionVPNVRouterIpOutNoRoutes	1.3.6.1.4.1.3085.3.1.4.2.3.1.1.10	Counter64	read-only	The number of IP datagrams discarded because no route could be found to transmit them to their destination. Note that this counter includes any packets counted in ipForwDatagrams which meet this `no-route' criterion. Note that this includes any datagarms which a host cannot route because all of its default gateways are down.
C64 csOrionVPNVRouterIpOutRequests	1.3.6.1.4.1.3085.3.1.4.2.3.1.1.8	Counter64	read-only	The total number of IP datagrams which local IP user-protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not include any datagrams counted in ipForwDatagrams.
C64 csOrionVPNVRouterIpReasmFails	1.3.6.1.4.1.3085.3.1.4.2.3.1.1.13	Counter64	read-only	The number of failures detected by the IP re- assembly algorithm (for whatever reason: timed out, errors, etc). Note that this is not necessarily a count of discarded IP fragments since some algorithms (notably the algorithm in RFC 815) can lose track of the number of fragments by combining them as they are received.
C64 csOrionVPNVRouterIpReasmOKs	1.3.6.1.4.1.3085.3.1.4.2.3.1.1.12	Counter64	read-only	The number of IP datagrams successfully re- assembled.
C64 csOrionVPNVRouterIpReasmReqds	1.3.6.1.4.1.3085.3.1.4.2.3.1.1.11	Counter64	read-only	The number of IP fragments received which needed to be reassembled at this entity.
I32 csOrionVPNVRouterIpReasmTimeout	1.3.6.1.4.1.3085.3.1.4.2.1.1.1.5	Integer32	read-create	The maximum number of seconds which received fragments are held while they are awaiting reassembly at this entity.
I32 csOrionVPNVRouterIpRouteAge	1.3.6.1.4.1.3085.3.1.4.2.3.3.1.8	Integer32	read-only	The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned.
IP csOrionVPNVRouterIpRouteDest	1.3.6.1.4.1.3085.3.1.4.2.3.3.1.1	IpAddress	not-accessible	The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table- access mechanisms defined by the network management protocol in use.
csOrionVPNVRouterIpRouteEntry	1.3.6.1.4.1.3085.3.1.4.2.3.3.1		not-accessible	The addressing information for one of this Orion's IP addresses.
I32 csOrionVPNVRouterIpRouteIfIndex	1.3.6.1.4.1.3085.3.1.4.2.3.3.1.5	Integer32	read-create	The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
OID csOrionVPNVRouterIpRouteInfo	1.3.6.1.4.1.3085.3.1.4.2.3.3.1.9	OBJECT IDENTIFIER	read-create	A reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the route's csOrionVPNVRouterIpRouteProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntatically valid object identifier, and any conformant implementation of ASN.1 and BER must be able to generate and recognize this value.
IP csOrionVPNVRouterIpRouteMask	1.3.6.1.4.1.3085.3.1.4.2.3.3.1.2	IpAddress	not-accessible	Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the csOrionVPNVRouterIpRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the csOrionVPNVRouterIpRouteMask by determining whether the value of the correspondent csOrionVPNVRouterIpRouteDest field belong to a class-A, B, or C network, and then using one of: mask network 255.0.0.0 class-A 255.255.0.0 class-B 255.255.255.0 class-C If the value of the csOrionVPNVRouterIpRouteDest is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism.
I32 csOrionVPNVRouterIpRouteMetric1	1.3.6.1.4.1.3085.3.1.4.2.3.3.1.11	Integer32	read-create	The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's csOrionVPNVRouterIpRouteProto value. If this metric is not used, its value should be set to -1.
I32 csOrionVPNVRouterIpRouteMetric2	1.3.6.1.4.1.3085.3.1.4.2.3.3.1.12	Integer32	read-create	An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's csOrionVPNVRouterIpRouteProto value. If this metric is not used, its value should be set to -1.
I32 csOrionVPNVRouterIpRouteMetric3	1.3.6.1.4.1.3085.3.1.4.2.3.3.1.13	Integer32	read-create	An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's csOrionVPNVRouterIpRouteProto value. If this metric is not used, its value should be set to -1.
I32 csOrionVPNVRouterIpRouteMetric4	1.3.6.1.4.1.3085.3.1.4.2.3.3.1.14	Integer32	read-create	An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's csOrionVPNVRouterIpRouteProto value. If this metric is not used, its value should be set to -1.
I32 csOrionVPNVRouterIpRouteMetric5	1.3.6.1.4.1.3085.3.1.4.2.3.3.1.15	Integer32	read-create	An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's csOrionVPNVRouterIpRouteProto value. If this metric is not used, its value should be set to -1.
IP csOrionVPNVRouterIpRouteNextHop	1.3.6.1.4.1.3085.3.1.4.2.3.3.1.4	IpAddress	not-accessible	The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface.)
I32 csOrionVPNVRouterIpRouteNextHopAS	1.3.6.1.4.1.3085.3.1.4.2.3.3.1.10	Integer32	read-create	The Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing-protocol specified in the route's ipCidrRouteProto value. When this object is unknown or not relevant its value should be set to zero.
OPE csOrionVPNVRouterIpRouteOperStatus	1.3.6.1.4.1.3085.3.1.4.2.3.3.1.17	OperStatus	read-only	A operational status for the Virtual Router of the VPN.
INT csOrionVPNVRouterIpRouteProto	1.3.6.1.4.1.3085.3.1.4.2.3.3.1.7	INTEGER	read-only	The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.
ROW csOrionVPNVRouterIpRouteRowStatus	1.3.6.1.4.1.3085.3.1.4.2.3.3.1.16	RowStatus	read-create	A row status type for the VPN Virtual Router.
csOrionVPNVRouterIpRouteTable	1.3.6.1.4.1.3085.3.1.4.2.3.3		not-accessible	The table of addressing information relevant to Orion's IP addresses.
I32 csOrionVPNVRouterIpRouteTos	1.3.6.1.4.1.3085.3.1.4.2.3.3.1.3	Integer32	not-accessible	The policy specifier is the IP TOS Field. The encoding of IP TOS is as specified by the following convention. Zero indicates the default path if no more specific policy applies. +-----+-----+-----+-----+-----+-----+-----+-----+ \| \| \| \| \| PRECEDENCE \| TYPE OF SERVICE \| 0 \| \| \| \| \| +-----+-----+-----+-----+-----+-----+-----+-----+ IP TOS IP TOS Field Policy Field Policy Contents Code Contents Code 0 0 0 0 ==> 0 0 0 0 1 ==> 2 0 0 1 0 ==> 4 0 0 1 1 ==> 6 0 1 0 0 ==> 8 0 1 0 1 ==> 10 0 1 1 0 ==> 12 0 1 1 1 ==> 14 1 0 0 0 ==> 16 1 0 0 1 ==> 18 1 0 1 0 ==> 20 1 0 1 1 ==> 22 1 1 0 0 ==> 24 1 1 0 1 ==> 26 1 1 1 0 ==> 28 1 1 1 1 ==> 30
INT csOrionVPNVRouterIpRouteType	1.3.6.1.4.1.3085.3.1.4.2.3.3.1.6	INTEGER	read-create	The type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for which the next hop is not the final destina- tion. Routes which do not result in traffic forwarding or rejection should not be displayed even if the implementation keeps them stored internally. reject (2) refers to a route which, if matched, discards the message as unreachable. This is used in some protocols as a means of correctly aggregating routes.
csOrionVPNVRouterIpStatsEntry	1.3.6.1.4.1.3085.3.1.4.2.3.1.1		not-accessible	The addressing information for one of this Orion's IP addresses.
csOrionVPNVRouterIpStatsTable	1.3.6.1.4.1.3085.3.1.4.2.3.1		not-accessible	The table of IP related statistics for each Virtual Router.
STR csOrionVPNVRouterLocations	1.3.6.1.4.1.3085.3.1.4.2.1.1.1.10	DisplayString	read-create	This object contains an ascii string which is used to identify possible address locations for the various elements of a Virtual Router. The format of the string is 'a/x, b/y, c/z', where 'a', 'b' and 'c' denote the blade numbers and are integers (1..26); 'x', 'y' and 'z' denote the processor engine (PE) ID and are integers (0..3). Specification of PE is optional. Note, this object can only be set when the Virtual Router is being created. If nothing is entered, the Resource Manager will decide where to place the Virtual Router elements. If the blade is specified but not the PE ID, the Resource Manager will decide which PE(s) to place the various Virtual Router objects on.
INT csOrionVPNVRouterManagedIpRouteActiveOption	1.3.6.1.4.1.3085.3.1.4.2.3.6.1.21	INTEGER	read-create	Additional information for managed routes which is included with the route when it is installed in the routing table. unspecified (1) implies the default option for the route protocol should be used. active (2) routes are removed from the routing and forwarding table if they become inactive. passive (3) routes remain installed in the routing and forwarding tables it the route becomes inactive. They are marked with reject next-hops when they are inactive.
INT csOrionVPNVRouterManagedIpRouteAdvertiseOption	1.3.6.1.4.1.3085.3.1.4.2.3.6.1.23	INTEGER	read-create	Additional information for managed routes which is included with the route when it is installed in the routing table. unspecified (1) implies the default option for the route protocol should be used. readvertise (2) routes are eligibled to be readvertised by by other routing protocols if the route is active. no-readvertise (3) routes are not considered for readverisement by other protocols.
I32 csOrionVPNVRouterManagedIpRouteAge	1.3.6.1.4.1.3085.3.1.4.2.3.6.1.9	Integer32	read-only	If the route is added to the routing table, this field indicates the number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned.
I32 csOrionVPNVRouterManagedIpRouteColor1	1.3.6.1.4.1.3085.3.1.4.2.3.6.1.19	Integer32	read-create	The primary color value for this route. The color is used a finer grain preference value. It should be applied for route select if preference1 and preference2 values match.
I32 csOrionVPNVRouterManagedIpRouteColor2	1.3.6.1.4.1.3085.3.1.4.2.3.6.1.20	Integer32	read-create	The secondary color value for this route. The color is used a finer grain preference value. It should be applied for route select if preference1 and preference2 values match.
IP csOrionVPNVRouterManagedIpRouteDest	1.3.6.1.4.1.3085.3.1.4.2.3.6.1.2	IpAddress	not-accessible	The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table- access mechanisms defined by the network management protocol in use.
csOrionVPNVRouterManagedIpRouteEntry	1.3.6.1.4.1.3085.3.1.4.2.3.6.1		not-accessible	The addressing information for one of this Orion's managed IP addresses.
I32 csOrionVPNVRouterManagedIpRouteIfIndex	1.3.6.1.4.1.3085.3.1.4.2.3.6.1.6	Integer32	not-accessible	The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
OID csOrionVPNVRouterManagedIpRouteInfo	1.3.6.1.4.1.3085.3.1.4.2.3.6.1.10	OBJECT IDENTIFIER	read-create	A reference to MIB definitions specific to the particular routing protocol/owner which is responsi- ble for this route, as determined by the value specified in the route's ipCidrRouteProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntactically valid object identif- ier, and any implementation conforming to ASN.1 and the Basic Encoding Rules must be able to generate and recognize this value.
INT csOrionVPNVRouterManagedIpRouteInstallOption	1.3.6.1.4.1.3085.3.1.4.2.3.6.1.22	INTEGER	read-create	Additional information for managed routes which is included with the route when it is installed in the routing table. unspecified (1) implies the default option for the route protocol should be used. install (2) routes are eligibled to be installed into the roting and forwarding tables if selected. no-install (3) routes are not considered for selection of active routes and hence not installed in the forwarding table.
IP csOrionVPNVRouterManagedIpRouteMask	1.3.6.1.4.1.3085.3.1.4.2.3.6.1.3	IpAddress	not-accessible	Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the csOrionVPNVRouterManagedIpRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the csOrionVPNVRouterManagedIpRouteMask by determining whether the value of the correspondent csOrionVPNVRouterManagedIpRouteDest field belong to a class-A, B, or C network, and then using one of: mask network 255.0.0.0 class-A 255.255.0.0 class-B 255.255.255.0 class-C If the value of the csOrionVPNVRouterManagedIpRouteDest is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism.
I32 csOrionVPNVRouterManagedIpRouteMetric1	1.3.6.1.4.1.3085.3.1.4.2.3.6.1.12	Integer32	read-create	The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol/owner specified in the route's csOrionVPNVRouterManagedIpRouteProto value. If this metric is not used, its value should be set to -1.
I32 csOrionVPNVRouterManagedIpRouteMetric2	1.3.6.1.4.1.3085.3.1.4.2.3.6.1.13	Integer32	read-create	An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's csOrionVPNVRouterManagedIpRouteProto value. If this metric is not used, its value should be set to -1.
I32 csOrionVPNVRouterManagedIpRouteMetric3	1.3.6.1.4.1.3085.3.1.4.2.3.6.1.14	Integer32	read-create	An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's csOrionVPNVRouterManagedIpRouteProto value. If this metric is not used, its value should be set to -1.
I32 csOrionVPNVRouterManagedIpRouteMetric4	1.3.6.1.4.1.3085.3.1.4.2.3.6.1.15	Integer32	read-create	An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's csOrionVPNVRouterManagedIpRouteProto value. If this metric is not used, its value should be set to -1.
I32 csOrionVPNVRouterManagedIpRouteMetric5	1.3.6.1.4.1.3085.3.1.4.2.3.6.1.16	Integer32	read-create	An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's csOrionVPNVRouterManagedIpRouteProto value. If this metric is not used, its value should be set to -1.
IP csOrionVPNVRouterManagedIpRouteNextHop	1.3.6.1.4.1.3085.3.1.4.2.3.6.1.5	IpAddress	not-accessible	The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface.)
I32 csOrionVPNVRouterManagedIpRouteNextHopAS	1.3.6.1.4.1.3085.3.1.4.2.3.6.1.11	Integer32	read-create	The Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing-protocol specified in the route's csOrionVPNVRouterManagedIpRouteProto value. When this object is unknown or not relevant its value should be set to zero.
OPE csOrionVPNVRouterManagedIpRouteOperState	1.3.6.1.4.1.3085.3.1.4.2.3.6.1.26	OperState	read-only	The operational state of this route. The state is ON if the route is selecetd to the IP forwarding table. Otherwise, the operational state is OFF.
INT csOrionVPNVRouterManagedIpRouteOwner	1.3.6.1.4.1.3085.3.1.4.2.3.6.1.1	INTEGER	not-accessible	The owner/manager of this route. The well known route examples for managed routes are static and generated route managers which manage the routes of the respective types.
I32 csOrionVPNVRouterManagedIpRoutePreference1	1.3.6.1.4.1.3085.3.1.4.2.3.6.1.17	Integer32	read-create	The primary preference value for this route. The route preference value which is also referred to as the Adminstrative Distance is used for selecting a route when multiple routes from different routing protocols exist. The route with a lower preference value is preferred. Valid range is 1 through 255.
I32 csOrionVPNVRouterManagedIpRoutePreference2	1.3.6.1.4.1.3085.3.1.4.2.3.6.1.18	Integer32	read-create	The secondary preference value for this route. The route preference value which is also referred to as the Adminstrative Distance is used for selecting a route when multiple routes from different routing protocols exist. The route with a lower preference value is preferred. Valid range is 1 through 255.
INT csOrionVPNVRouterManagedIpRouteProto	1.3.6.1.4.1.3085.3.1.4.2.3.6.1.8	INTEGER	read-only	The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.
INT csOrionVPNVRouterManagedIpRouteRetainOption	1.3.6.1.4.1.3085.3.1.4.2.3.6.1.24	INTEGER	read-create	Additional information for managed routes which is included with the route when it is installed in the routing table. unspecified (1) implies the default option for the route protocol should be used. retain (2) routes are retained in the forwarding table if the route manager shuts down. no-retain (3) routes are removed from the routing table if the route manager shuts down.
ROW csOrionVPNVRouterManagedIpRouteRowStatus	1.3.6.1.4.1.3085.3.1.4.2.3.6.1.25	RowStatus	read-create	A row status type for the VPN Virtual Router.
csOrionVPNVRouterManagedIpRouteTable	1.3.6.1.4.1.3085.3.1.4.2.3.6		not-accessible	The table of addressing information relevant to Orion's managed IP addresses.
I32 csOrionVPNVRouterManagedIpRouteTos	1.3.6.1.4.1.3085.3.1.4.2.3.6.1.4	Integer32	not-accessible	The policy specifier is the IP TOS Field. The encoding of IP TOS is as specified by the following convention. Zero indicates the default path if no more specific policy applies. +-----+-----+-----+-----+-----+-----+-----+-----+ \| \| \| \| \| PRECEDENCE \| TYPE OF SERVICE \| 0 \| \| \| \| \| +-----+-----+-----+-----+-----+-----+-----+-----+ IP TOS IP TOS Field Policy Field Policy Contents Code Contents Code 0 0 0 0 ==> 0 0 0 0 1 ==> 2 0 0 1 0 ==> 4 0 0 1 1 ==> 6 0 1 0 0 ==> 8 0 1 0 1 ==> 10 0 1 1 0 ==> 12 0 1 1 1 ==> 14 1 0 0 0 ==> 16 1 0 0 1 ==> 18 1 0 1 0 ==> 20 1 0 1 1 ==> 22 1 1 0 0 ==> 24 1 1 0 1 ==> 26 1 1 1 0 ==> 28 1 1 1 1 ==> 30
INT csOrionVPNVRouterManagedIpRouteType	1.3.6.1.4.1.3085.3.1.4.2.3.6.1.7	INTEGER	read-create	The type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for which the next hop is not the final destina- tion. reject (2) refers to a route which, if matched, discards the message as unreachable. An ICMP unreachable message is sent to the originator of the packet. discard (1001) refers to the case where an ICMP message is not sent to the originator. These route types are used by protocols as a means of correctly aggregating routes.
STR csOrionVPNVRouterName	1.3.6.1.4.1.3085.3.1.4.2.1.1.1.2	DisplayString	read-create	A textual string containing information about the Virtual Router, configured to the particular VPN.
STR csOrionVPNVRouterOperLocations	1.3.6.1.4.1.3085.3.1.4.2.1.1.1.14	DisplayString	read-only	This object contains an ascii string which is used to identify the operational address locations for the various elements of a Virtual Router. The format of the string is 'a/x, b/y, c/z', where 'a', 'b' and 'c' denote the blade numbers and are integers (1..26); 'x', 'y' and 'z' denote the processor engine ID and are integers (0..3).
OPE csOrionVPNVRouterOperStatus	1.3.6.1.4.1.3085.3.1.4.2.1.1.1.9	OperStatus	read-only	A operational status for the Virtual Router of the VPN.
ROW csOrionVPNVRouterRowStatus	1.3.6.1.4.1.3085.3.1.4.2.1.1.1.8	RowStatus	read-create	A row status type for the VPN Virtual Router.
csOrionVPNVRouterTable	1.3.6.1.4.1.3085.3.1.4.2.1.1		not-accessible	A list of Virtual Routers, configured for the VPN.
C32 csOrionVPNVRouterTcpActiveOpens	1.3.6.1.4.1.3085.3.1.4.2.6.1.1.5	Counter32	read-only	The number of times TCP connections have made a direct transition to the SYN-SENT state from the CLOSED state.
C32 csOrionVPNVRouterTcpAttemptFails	1.3.6.1.4.1.3085.3.1.4.2.6.1.1.7	Counter32	read-only	The number of times TCP connections have made a direct transition to the CLOSED state from either the SYN-SENT state or the SYN-RCVD state, plus the number of times TCP connections have made a direct transition to the LISTEN state from the SYN-RCVD state.
csOrionVPNVRouterTcpConnEntry	1.3.6.1.4.1.3085.3.1.4.2.6.2.1		not-accessible	The addressing information for one of this Orion's IP addresses.
IP csOrionVPNVRouterTcpConnLocalAddress	1.3.6.1.4.1.3085.3.1.4.2.6.2.1.2	IpAddress	read-only	The local IP address for this TCP connection. In the case of a connection in the listen state which is willing to accept connections for any IP interface associated with the node, the value 0.0.0.0 is used.
I32 csOrionVPNVRouterTcpConnLocalPort	1.3.6.1.4.1.3085.3.1.4.2.6.2.1.3	Integer32	read-only	The local port number for this TCP connection.
IP csOrionVPNVRouterTcpConnRemAddress	1.3.6.1.4.1.3085.3.1.4.2.6.2.1.4	IpAddress	read-only	The remote IP address for this TCP connection.
I32 csOrionVPNVRouterTcpConnRemPort	1.3.6.1.4.1.3085.3.1.4.2.6.2.1.5	Integer32	read-only	The remote port number for this TCP connection.
INT csOrionVPNVRouterTcpConnState	1.3.6.1.4.1.3085.3.1.4.2.6.2.1.1	INTEGER	read-write	The state of this TCP connection. The only value which may be set by a management station is deleteTCB(12). Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to set this object to any other value. If a management station sets this object to the value deleteTCB(12), then this has the effect of deleting the TCB (as defined in RFC 793) of the corresponding connection on the managed node, resulting in immediate termination of the connection. As an implementation-specific option, a RST segment may be sent from the managed node to the other TCP endpoint (note however that RST egments are not sent reliably).
csOrionVPNVRouterTcpConnTable	1.3.6.1.4.1.3085.3.1.4.2.6.2		not-accessible	The table of addressing information relevant to Orion's IP addresses.
G32 csOrionVPNVRouterTcpCurrEstab	1.3.6.1.4.1.3085.3.1.4.2.6.1.1.9	Gauge32	read-only	The number of TCP connections for which the current state is either ESTABLISHED or CLOSE- WAIT.
csOrionVPNVRouterTcpEntry	1.3.6.1.4.1.3085.3.1.4.2.6.1.1		not-accessible	The entry of the table of TCP Parameters.
C32 csOrionVPNVRouterTcpEstabResets	1.3.6.1.4.1.3085.3.1.4.2.6.1.1.8	Counter32	read-only	The number of times TCP connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state.
C32 csOrionVPNVRouterTcpInErrs	1.3.6.1.4.1.3085.3.1.4.2.6.1.1.13	Counter32	read-only	The total number of segments received in error (e.g., bad TCP checksums).
C32 csOrionVPNVRouterTcpInSegs	1.3.6.1.4.1.3085.3.1.4.2.6.1.1.10	Counter32	read-only	The total number of segments received, including those received in error. This count includes segments received on currently established connections.
I32 csOrionVPNVRouterTcpMaxConn	1.3.6.1.4.1.3085.3.1.4.2.6.1.1.4	Integer32	read-only	The limit on the total number of TCP connections the entity can support. In entities where the maximum number of connections is dynamic, this object should contain the value -1.
C32 csOrionVPNVRouterTcpOutRsts	1.3.6.1.4.1.3085.3.1.4.2.6.1.1.14	Counter32	read-only	The number of TCP segments sent containing the RST flag.
C32 csOrionVPNVRouterTcpOutSegs	1.3.6.1.4.1.3085.3.1.4.2.6.1.1.11	Counter32	read-only	The total number of segments sent, including those on current connections but excluding those containing only retransmitted octets.
C32 csOrionVPNVRouterTcpPassiveOpens	1.3.6.1.4.1.3085.3.1.4.2.6.1.1.6	Counter32	read-only	The number of times TCP connections have made a direct transition to the SYN-RCVD state from the LISTEN state.
C32 csOrionVPNVRouterTcpRetransSegs	1.3.6.1.4.1.3085.3.1.4.2.6.1.1.12	Counter32	read-only	The total number of segments retransmitted - that is, the number of TCP segments transmitted containing one or more previously transmitted octets.
INT csOrionVPNVRouterTcpRtoAlgorithm	1.3.6.1.4.1.3085.3.1.4.2.6.1.1.1	INTEGER	read-only	The algorithm used to determine the timeout value used for retransmitting unacknowledged octets.
I32 csOrionVPNVRouterTcpRtoMax	1.3.6.1.4.1.3085.3.1.4.2.6.1.1.3	Integer32	read-only	The maximum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds. More refined semantics for objects of this type depend upon the algorithm used to determine the retransmission timeout. In particular, when the timeout algorithm is rsre(3), an object of this type has the semantics of the UBOUND quantity described in RFC 793.
I32 csOrionVPNVRouterTcpRtoMin	1.3.6.1.4.1.3085.3.1.4.2.6.1.1.2	Integer32	read-only	The minimum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds. More refined semantics for objects of this type depend upon the algorithm used to determine the retransmission timeout. In particular, when the timeout algorithm is rsre(3), an object of this type has the semantics of the LBOUND quantity described in RFC 793.
csOrionVPNVRouterTcpTable	1.3.6.1.4.1.3085.3.1.4.2.6.1		not-accessible	The table of TCP Parameters.
INT csOrionVPNVRouterType	1.3.6.1.4.1.3085.3.1.4.2.1.1.1.11	INTEGER	read-create	This identifies whether this Virtual Router is a data VR or the Control VR. Note, there can be only one control VR on the entire IPSX system and it must be located entirely on the control blade. Further, this object can only be set when the Virtual Router is being created.
csOrionVPNVRouterUdpEntry	1.3.6.1.4.1.3085.3.1.4.2.7.1.1		not-accessible	The addressing information for one of this Orion's IP addresses.
C32 csOrionVPNVRouterUdpInDatagrams	1.3.6.1.4.1.3085.3.1.4.2.7.1.1.1	Counter32	read-only	The total number of UDP datagrams delivered to UDP users.
C32 csOrionVPNVRouterUdpInErrors	1.3.6.1.4.1.3085.3.1.4.2.7.1.1.3	Counter32	read-only	The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port.
csOrionVPNVRouterUdpListenerEntry	1.3.6.1.4.1.3085.3.1.4.2.7.2.1		not-accessible	The addressing information for one of this Orion's IP addresses.
IP csOrionVPNVRouterUdpListenerLocalAddress	1.3.6.1.4.1.3085.3.1.4.2.7.2.1.1	IpAddress	read-only	The local IP address for this UDP listener. In the case of a UDP listener which is willing to accept datagrams for any IP interface associated with the node, the value 0.0.0.0 is used.
I32 csOrionVPNVRouterUdpListenerLocalPort	1.3.6.1.4.1.3085.3.1.4.2.7.2.1.2	Integer32	read-only	The local port number for this UDP listener.
csOrionVPNVRouterUdpListenerTable	1.3.6.1.4.1.3085.3.1.4.2.7.2		not-accessible	The table of addressing information relevant to Orion's IP addresses.
C32 csOrionVPNVRouterUdpNoPorts	1.3.6.1.4.1.3085.3.1.4.2.7.1.1.2	Counter32	read-only	The total number of received UDP datagrams for which there was no application at the destination port.
C32 csOrionVPNVRouterUdpOutDatagrams	1.3.6.1.4.1.3085.3.1.4.2.7.1.1.4	Counter32	read-only	The total number of UDP datagrams sent from this entity.
csOrionVPNVRouterUdpTable	1.3.6.1.4.1.3085.3.1.4.2.7.1		not-accessible	The table of addressing information relevant to Orion's IP addresses.
STR csOrionVPNVRouterUpTime	1.3.6.1.4.1.3085.3.1.4.2.1.1.1.21	DisplayString	read-only	If the attribute is 'true' then the the VR will be failed over to the backup PE immediately. Setting this attribute makes sense ONLY when csOrionVPNVRouterFailOver is also set
OCT csOrionVrAcctCompStats	1.3.6.1.4.1.3085.3.1.10.1.2.1.1	OCTET STRING	read-only	Composite stats for this VPN
csOrionVrAcctEntry	1.3.6.1.4.1.3085.3.1.10.1.2.1		not-accessible	Each entry contains composite stats for a single VPN.
csOrionVrAcctTable	1.3.6.1.4.1.3085.3.1.10.1.2		not-accessible	This table contains composite stats for each of the VRs in this Orion.
INT csOrionVrDhcpRelayAdminStatus	1.3.6.1.4.1.3085.3.1.6.15.1.1.1.4	INTEGER	read-create	This object indicates the desired state of the DHCP relay agent. A relay agent, once enabled, requires at least one DHCP server address to forward packets to. If a list of servers has been configured, then all requests are forwarded to all servers -- no priority or precedence is applied.
csOrionVrDhcpRelayConfigEntry	1.3.6.1.4.1.3085.3.1.6.15.1.1.1		not-accessible	Each entry represents the DHCP Relay configuration for a single VR.
csOrionVrDhcpRelayConfigTable	1.3.6.1.4.1.3085.3.1.6.15.1.1		not-accessible	This table contains DHCP Relay Agent configuration parameters.
I32 csOrionVrDhcpRelayMaxHops	1.3.6.1.4.1.3085.3.1.6.15.1.1.1.1	Integer32	read-create	The upper limit for the 'hops' field of DHCP requests. Any request with a value exceeding this limit will be dropped by the relay agent.
OPE csOrionVrDhcpRelayOperStatus	1.3.6.1.4.1.3085.3.1.6.15.1.1.1.3	OperStatus	read-only	This object indicates the current operational status of the relay agent.
I32 csOrionVrDhcpRelaySecsThreshold	1.3.6.1.4.1.3085.3.1.6.15.1.1.1.2	Integer32	read-create	The threshold, in seconds, for the 'time elapsed' field of DHCP requests. This value is used to prioritize clients across the relay agent. The agent forwards only those requests that have a 'time elapsed' field value equal to or greater than the value set for this paramter.
IP csOrionVrDhcpRelayServerAddress	1.3.6.1.4.1.3085.3.1.6.15.1.2.1.1	IpAddress	read-create	The IP address of the DHCP server this entry corresponds to.
csOrionVrDhcpRelayServerEntry	1.3.6.1.4.1.3085.3.1.6.15.1.2.1		not-accessible	Each entry contains a information about a single DHCP server - an IP address, and, optionally, a name.
STR csOrionVrDhcpRelayServerName	1.3.6.1.4.1.3085.3.1.6.15.1.2.1.2	DisplayString	read-create	The name of the the DHCP server this entry corresponds to.
ROW csOrionVrDhcpRelayServerRowStatus	1.3.6.1.4.1.3085.3.1.6.15.1.2.1.3	RowStatus	read-create	The RowStatus object for this table entry.
csOrionVrDhcpRelayServerTable	1.3.6.1.4.1.3085.3.1.6.15.1.2		not-accessible	This table contains the IP addresses of a list of DHCP servers to which the relay can forward the requests.
csOrionVrDnsConfigEntry	1.3.6.1.4.1.3085.3.1.6.10.1.1		not-accessible	Each entry represents the DNS configuration parameters for a single VR.
csOrionVrDnsConfigTable	1.3.6.1.4.1.3085.3.1.6.10.1		not-accessible	This table contains DNS configuration parameters.
I32 csOrionVrDsByteFilterAclId	1.3.6.1.4.1.3085.3.1.6.14.1.1.1.2	Integer32	read-create	The Id of an access list entry (from csOrionGenAclTable). All packets transmitted or received on any of the virtual interfaces on this virtual router that satisfy that access list entry are acted upon by this filter.
INT csOrionVrDsByteFilterAction	1.3.6.1.4.1.3085.3.1.6.14.1.1.1.3	INTEGER	read-create	The action performed by this filter.
INT csOrionVrDsByteFilterDirection	1.3.6.1.4.1.3085.3.1.6.14.1.1.1.5	INTEGER	read-create	The direction of packets on which this filter is applied.
csOrionVrDsByteFilterEntry	1.3.6.1.4.1.3085.3.1.6.14.1.1.1		not-accessible	Each entry specifies whether packets satisfying a specific access list entry will have their DS Byte field set to the value indicated in the table entry.
I32 csOrionVrDsByteFilterIndex	1.3.6.1.4.1.3085.3.1.6.14.1.1.1.1	Integer32	not-accessible	The Index of this particular Packet Filter.
ROW csOrionVrDsByteFilterRowStatus	1.3.6.1.4.1.3085.3.1.6.14.1.1.1.6	RowStatus	read-create	A row status type for this Table entry.
csOrionVrDsByteFilterTable	1.3.6.1.4.1.3085.3.1.6.14.1.1		not-accessible	This table specifies a set of acl's to be applied to packets received by (and sent from) this virtual router. The first entry whose acl matches a packet causes the DS Byte field of the packet to be set to the value specified in the table entry. If no entry's acl matches the packet, the DS Byte field of the packet will be set to the value specified in csOrionVPNVRouterIpDsByte.
I32 csOrionVrDsByteFilterValue	1.3.6.1.4.1.3085.3.1.6.14.1.1.1.4	Integer32	read-create	This object defines the values to be placed in the TypeOfService octet of each IP packet sent out or forwarded by the VR. The valid range covers both 7-bit configurations recommended in RFC 1349 (Precedence and TOS bits) and 6-bit configurations recommended in RFC 2474 (Differentiated Services). If the value selected is 256, the DsByte is not changed and packets are forwarded with their existing TypeOfService byte value.
csOrionVrGeneralInfo	1.3.6.1.4.1.3085.3.1.4.2.1
I32 csOrionVrIfManagerChannelIndex	1.3.6.1.4.1.3085.3.1.6.18.1.1.4	Integer32	not-accessible	This object identifies the channel ID.
csOrionVrIfManagerEntry	1.3.6.1.4.1.3085.3.1.6.18.1.1		not-accessible
I32 csOrionVrIfManagerModuleIndex	1.3.6.1.4.1.3085.3.1.6.18.1.1.2	Integer32	not-accessible	This object identifies the module ID.
I32 csOrionVrIfManagerPortIndex	1.3.6.1.4.1.3085.3.1.6.18.1.1.3	Integer32	not-accessible	This object identifies the port ID.
ROW csOrionVrIfManagerRowStatus	1.3.6.1.4.1.3085.3.1.6.18.1.1.6	RowStatus	read-create	The row status for this table.
I32 csOrionVrIfManagerSlotIndex	1.3.6.1.4.1.3085.3.1.6.18.1.1.1	Integer32	not-accessible	This object identifies the slot ID.
I32 csOrionVrIfManagerSubifIndex	1.3.6.1.4.1.3085.3.1.6.18.1.1.5	Integer32	not-accessible	This object identifies the subif ID.
csOrionVrIfManagerTable	1.3.6.1.4.1.3085.3.1.6.18.1		not-accessible
csOrionVrNbnsConfigEntry	1.3.6.1.4.1.3085.3.1.6.19.1.1		not-accessible	Each entry represents the NBNS configuration parameters for a single VR.
csOrionVrNbnsConfigTable	1.3.6.1.4.1.3085.3.1.6.19.1		not-accessible	This table contains NBNS configuration parameters.
I32 csOrionVrPktFilterAclId	1.3.6.1.4.1.3085.3.1.6.3.1.1.2	Integer32	read-create	The Id of an access list entry (from csOrionGenAclTable). All packets transmitted or received on any of the virtual interfaces on this virtual router that satisfy that access list entry are acted upon by this filter.
INT csOrionVrPktFilterAction	1.3.6.1.4.1.3085.3.1.6.3.1.1.3	INTEGER	read-create	The action performed by this filter.
INT csOrionVrPktFilterCounterStatus	1.3.6.1.4.1.3085.3.1.6.3.1.1.8	INTEGER	read-create	The status of csOrionVrPktFilterHitCounter. Will also be enabled as a result of enabling csOrionVrPktFilterEvlogStatus.
INT csOrionVrPktFilterDirection	1.3.6.1.4.1.3085.3.1.6.3.1.1.4	INTEGER	read-create	The direction of packets on which this filter is applied.
csOrionVrPktFilterEntry	1.3.6.1.4.1.3085.3.1.6.3.1.1		not-accessible	Each filter specifies whether packets satisfying a specific access list entry are permitted or denied to be passed along their route.
INT csOrionVrPktFilterEvlogStatus	1.3.6.1.4.1.3085.3.1.6.3.1.1.9	INTEGER	read-create	If enabled, event logs will be sent when a packet hits this packet filter. Will also result to csOrionVrPktFilterCounterStatus enabled.
C64 csOrionVrPktFilterHitCounter	1.3.6.1.4.1.3085.3.1.6.3.1.1.7	Counter64	read-only	When csOrionVrPktFilterHitCounter is enabled, the counter be incremented everytime a packet that corresponds to the packet filter is received.
I32 csOrionVrPktFilterIndex	1.3.6.1.4.1.3085.3.1.6.3.1.1.1	Integer32	not-accessible	The Index of this particular Packet Filter.
ROW csOrionVrPktFilterRowStatus	1.3.6.1.4.1.3085.3.1.6.3.1.1.5	RowStatus	read-create	A row status type for this Table entry.
csOrionVrPktFilterTable	1.3.6.1.4.1.3085.3.1.6.3.1		not-accessible	This table specifies a set of filters to be applied to packets received over each the interfaces over this virtual router. Filters can be configured either to permit a packet, deny a packet, or send the packet to a firewall proxy.
INT csOrionVrPktFilterTcpStatus	1.3.6.1.4.1.3085.3.1.6.3.1.1.6	INTEGER	read-create	The state of the TCP.
IP csOrionVrPrimaryDnsServer	1.3.6.1.4.1.3085.3.1.6.10.1.1.1	IpAddress	read-write	The primary DNS server for this VR.
IP csOrionVrPrimaryNbnsServer	1.3.6.1.4.1.3085.3.1.6.19.1.1.1	IpAddress	read-write	The primary NBNS server for this VR.
I32 csOrionVrQoSFilterAclId	1.3.6.1.4.1.3085.3.1.6.22.3.1.2	Integer32	not-accessible	The ACL id is the index to this table. Prior to using this, the ACL with index equal to this object value must be created
csOrionVrQoSFilterEntry	1.3.6.1.4.1.3085.3.1.6.22.3.1		not-accessible	Metering context entries
I32 csOrionVrQoSFilterIndex	1.3.6.1.4.1.3085.3.1.6.22.3.1.1	Integer32	not-accessible	index to this table.
STR csOrionVrQoSFilterMeterName	1.3.6.1.4.1.3085.3.1.6.22.3.1.3	DisplayString	read-create	This specifies which of the metering profile(template) to apply to this metering block
INT csOrionVrQoSFilterServiceCategory	1.3.6.1.4.1.3085.3.1.6.22.3.1.4	INTEGER	read-create	Priority with which the traffic is sent out
ROW csOrionVrQoSFilterStatus	1.3.6.1.4.1.3085.3.1.6.22.3.1.5	RowStatus	read-create	Creates or deletes the profile
csOrionVrQoSFilterTable	1.3.6.1.4.1.3085.3.1.6.22.3		not-accessible	This table specifies the metering control block for each of the traffic flows
IP csOrionVrRadiusAcctSvrAddress	1.3.6.1.4.1.3085.3.1.6.9.3.1.2	IpAddress	read-create	The IP address of this RADIUS accounting server in this list.
csOrionVrRadiusAcctSvrEntry	1.3.6.1.4.1.3085.3.1.6.9.3.1		not-accessible	An entry containing management information applicable to a particular RADIUS Accounting Server.
OCT csOrionVrRadiusAcctSvrKey	1.3.6.1.4.1.3085.3.1.6.9.3.1.3	OCTET STRING	read-create	The authentication and encryption key used for all Radius communication between the Virtual Router and this Radius Accounting Server.
OPE csOrionVrRadiusAcctSvrOperStatus	1.3.6.1.4.1.3085.3.1.6.9.3.1.5	OperStatus	read-only	The operational status for this entry in the Radius Accounting Server Table.
I32 csOrionVrRadiusAcctSvrPort	1.3.6.1.4.1.3085.3.1.6.9.3.1.6	Integer32	read-create	Radius client uses the default port 1813 for ACCT requests. This will not work with the old radius servers which uses 1646 for ACCT requests. To support the old port, we throw in this extra parameter.
I32 csOrionVrRadiusAcctSvrPriority	1.3.6.1.4.1.3085.3.1.6.9.3.1.1	Integer32	not-accessible	The relative priority of this RADIUS accounting server in this list.
ROW csOrionVrRadiusAcctSvrRowStatus	1.3.6.1.4.1.3085.3.1.6.9.3.1.4	RowStatus	read-create	The Admin Status type for this entry in the Radius Accounting Server Table.
csOrionVrRadiusAcctSvrTable	1.3.6.1.4.1.3085.3.1.6.9.3		not-accessible	A list of RADIUS accounting servers. This table is obsoleted as of release 3.0 in favor of csOrionAAAServerConfigTable and csOrionAAAServerListConfigTable.
csOrionVrRadiusConfigEntry	1.3.6.1.4.1.3085.3.1.6.9.1.1		not-accessible	Each entry represents the Radius configuration parameters for a single VR.
csOrionVrRadiusConfigTable	1.3.6.1.4.1.3085.3.1.6.9.1		not-accessible	This table contains Radius configuration parameters. This table is obsoleted as of release 3.0 in favor of csOrionAAAServerConfigTable and csOrionAAAServerListConfigTable.
I32 csOrionVrRadiusRetransmit	1.3.6.1.4.1.3085.3.1.6.9.1.1.1	Integer32	read-write	The number of times a Radius Server will be queried before moving to the next Radius Server in the list identified by csOrionVrRadiusList.
IP csOrionVrRadiusSvrAddress	1.3.6.1.4.1.3085.3.1.6.9.2.1.2	IpAddress	read-create	The IP address of this RADIUS server in this list.
csOrionVrRadiusSvrEntry	1.3.6.1.4.1.3085.3.1.6.9.2.1		not-accessible	An entry containing management information applicable to a particular RADIUS Server.
OCT csOrionVrRadiusSvrKey	1.3.6.1.4.1.3085.3.1.6.9.2.1.3	OCTET STRING	read-create	The authentication and encryption key used for all Radius communication between the Virtual Router and this Radius Server.
OPE csOrionVrRadiusSvrOperStatus	1.3.6.1.4.1.3085.3.1.6.9.2.1.5	OperStatus	read-only	The operational status for this entry in the Radius Server Table.
I32 csOrionVrRadiusSvrPort	1.3.6.1.4.1.3085.3.1.6.9.2.1.6	Integer32	read-create	Radius client uses the default port 1812 for AA requests. This will not work with the old radius servers which uses 1645 for AA requests. To support the old port, we throw in this extra parameter.
I32 csOrionVrRadiusSvrPriority	1.3.6.1.4.1.3085.3.1.6.9.2.1.1	Integer32	not-accessible	The relative priority of this RADIUS server in this list.
ROW csOrionVrRadiusSvrRowStatus	1.3.6.1.4.1.3085.3.1.6.9.2.1.4	RowStatus	read-create	The Admin Status type for this entry in the Radius Server Table.
csOrionVrRadiusSvrTable	1.3.6.1.4.1.3085.3.1.6.9.2		not-accessible	A list of RADIUS authentication servers. This table is obsoleted as of release 3.0 in favor of csOrionAAAServerConfigTable and csOrionAAAServerListConfigTable.
I32 csOrionVrRadiusTimeout	1.3.6.1.4.1.3085.3.1.6.9.1.1.2	Integer32	read-write	The amount of time (in seconds) this Virtual Router will wait for a Radius Server before timing out.
IP csOrionVrSecondaryDnsServer	1.3.6.1.4.1.3085.3.1.6.10.1.1.2	IpAddress	read-write	The secondary DNS server for this VR.
IP csOrionVrSecondaryNbnsServer	1.3.6.1.4.1.3085.3.1.6.19.1.1.2	IpAddress	read-write	The secondary NBNS server for this VR.
I32 csOrionVrSpfCleanTablesFlag	1.3.6.1.4.1.3085.3.1.6.20.1.1.18	Integer32	read-write	This is a flag to tell SPF to remove all entries fom the tables.
csOrionVrSpfConfEntry	1.3.6.1.4.1.3085.3.1.6.20.1.1		not-accessible	This table specifies a set of configurable parameters for the SPF module within each VR.
csOrionVrSpfConfTable	1.3.6.1.4.1.3085.3.1.6.20.1		not-accessible	This table contains SPF configuration parameters.
I32 csOrionVrSpfConnTblSize	1.3.6.1.4.1.3085.3.1.6.20.1.1.1	Integer32	read-write	This Size puts an upper limit on the total number of sessions (inclusive of TCP and UDP) that this VR will accept, connections beyond this number will be dropped.
I32 csOrionVrSpfIcmpCurrentConnTableEntries	1.3.6.1.4.1.3085.3.1.6.20.1.1.12	Integer32	read-write	This is the number of ICMP sessions in the Connection Table right now.
I32 csOrionVrSpfIcmpIdleTimeout	1.3.6.1.4.1.3085.3.1.6.20.1.1.9	Integer32	read-write	This is the idle timeout period for ICMP sessions.
I32 csOrionVrSpfIcmpTotalConnTableEntries	1.3.6.1.4.1.3085.3.1.6.20.1.1.15	Integer32	read-write	This is the total number of ICMP sessions seen by the Connection Table.
I32 csOrionVrSpfTcpCloseTimeout	1.3.6.1.4.1.3085.3.1.6.20.1.1.7	Integer32	read-write	This decides the lifetime of the TIME_WAIT state in the TCP session closure sequence.
I32 csOrionVrSpfTcpCurrentConnTableEntries	1.3.6.1.4.1.3085.3.1.6.20.1.1.10	Integer32	read-write	This is the number of TCP sessions in the Connection Table right now.
I32 csOrionVrSpfTcpIdleTimeout	1.3.6.1.4.1.3085.3.1.6.20.1.1.6	Integer32	read-write	This timeout value decides how long a TCP session can hang around without any activity(or Idle), such entries are deleted after the expiry of this period and end peers reset.
I32 csOrionVrSpfTcpInitTblSize	1.3.6.1.4.1.3085.3.1.6.20.1.1.2	Integer32	read-write	This Size puts an upper limit on the number of TCP sessions that can remain in the SYN state at any given time, this limits the ability to accept new TCP connections simultaneously.
I32 csOrionVrSpfTcpInitTimeout	1.3.6.1.4.1.3085.3.1.6.20.1.1.5	Integer32	read-write	This time out value decides how long a TCP session can remain in SYN state without the session establishment process reaching completion, the session is deleted after the expiry of this period.
INT csOrionVrSpfTcpSeqCheck	1.3.6.1.4.1.3085.3.1.6.20.1.1.4	INTEGER	read-write	If enabled, the tcp packets will be checked for validity of sequence number, this is done at init time, established state and close time.
I32 csOrionVrSpfTcpSynTableEntries	1.3.6.1.4.1.3085.3.1.6.20.1.1.16	Integer32	read-write	This is the total number of TCP SYN sessions in the TCP Initialization Table.
I32 csOrionVrSpfTcpTotalConnTableEntries	1.3.6.1.4.1.3085.3.1.6.20.1.1.13	Integer32	read-write	This is the total number of TCP sessions seen by the Connection Table.
I32 csOrionVrSpfUdpCurrentConnTableEntries	1.3.6.1.4.1.3085.3.1.6.20.1.1.11	Integer32	read-write	This is the number of UDP sessions in the Connection Table right now.
I32 csOrionVrSpfUdpIdleTimeout	1.3.6.1.4.1.3085.3.1.6.20.1.1.8	Integer32	read-write	This is the Idle timeout period for UDp sessions.
I32 csOrionVrSpfUdpInitTblSize	1.3.6.1.4.1.3085.3.1.6.20.1.1.3	Integer32	read-write	This Size puts an upper limit on the number of UDP sessions that can remain in the unmatched state at any given time, this limits the ability to accept new UDP connections simultaneously.
I32 csOrionVrSpfUdpTotalConnTableEntries	1.3.6.1.4.1.3085.3.1.6.20.1.1.14	Integer32	read-write	This is the total number of UDP sessions seen by the Connection Table.
I32 csOrionVrSpfUdpUnmatchedTableEntries	1.3.6.1.4.1.3085.3.1.6.20.1.1.17	Integer32	read-write	This is the total number of UDP sessions in the UDP Initialization Table.
I32 csOspfAddressLessIf	1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.2	Integer32	read-only	For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corresponding value of ifIndex for interfaces having no IP Address.
STA csOspfAdminStat	1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.2	Status	read-create	The administrative status of OSPF in the router. The value 'enabled' denotes that the OSPF process is active on the Virtual Router. 'disabled' disables it on all interfaces on the Virtual Router.
ARE csOspfAreaAggregateAreaID	1.3.6.1.4.1.3085.3.1.4.2.4.1.12.1.1	AreaID	not-accessible	The Area the Address Aggregate is to be found within.
INT csOspfAreaAggregateEffect	1.3.6.1.4.1.3085.3.1.4.2.4.1.12.1.6	INTEGER	read-create	Subnets subsumed by ranges either trigger the advertisement of the indicated aggregate (ad- vertiseMatching), or result in the subnet's not being advertised at all outside the area.
csOspfAreaAggregateEntry	1.3.6.1.4.1.3085.3.1.4.2.4.1.12.1		not-accessible	A range of IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 includes all IP addresses from X.X.0.0 to X.X.255.255. Note that if ranges are range configured such that one range subsumes another range (e.g., 10.0.0.0 mask 255.0.0.0 and 10.1.0.0 mask 255.255.0.0), the most specific match is the preferred one.
INT csOspfAreaAggregateLsdbType	1.3.6.1.4.1.3085.3.1.4.2.4.1.12.1.2	INTEGER	not-accessible	The type of the Address Aggregate. This field specifies the Lsdb type that this Address Ag- gregate applies to.
IP csOspfAreaAggregateMask	1.3.6.1.4.1.3085.3.1.4.2.4.1.12.1.4	IpAddress	not-accessible	The Subnet Mask that pertains to the Net or Subnet.
IP csOspfAreaAggregateNet	1.3.6.1.4.1.3085.3.1.4.2.4.1.12.1.3	IpAddress	not-accessible	The IP Address of the Net or Subnet indicated by the range.
ROW csOspfAreaAggregateStatus	1.3.6.1.4.1.3085.3.1.4.2.4.1.12.1.5	RowStatus	read-create	This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
csOspfAreaAggregateTable	1.3.6.1.4.1.3085.3.1.4.2.4.1.12		not-accessible	A range of IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 includes all IP addresses from X.X.0.0 to X.X.255.255. Note that if ranges are configured such that one range sub- sumes another range (e.g., 10.0.0.0 mask 255.0.0.0 and 10.1.0.0 mask 255.255.0.0), the most specific match is the preferred one.
INT csOspfAreaAuthType	1.3.6.1.4.1.3085.3.1.4.2.4.1.2.1.10	INTEGER	read-create	The authentication type specified for this area.
G32 csOspfAreaBdrRtrCount	1.3.6.1.4.1.3085.3.1.4.2.4.1.2.1.5	Gauge32	read-only	The total number of area border routers reach- able within this area. This is initially zero, and is calculated in each SPF Pass.
T/F csOspfAreaBdrRtrStatus	1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.4	TruthValue	read-only	A flag to note whether this router is an area border router.
csOspfAreaEntry	1.3.6.1.4.1.3085.3.1.4.2.4.1.2.1		not-accessible	Information describing the configured parame- ters and cumulative statistics of one of the router's attached areas.
ARE csOspfAreaId	1.3.6.1.4.1.3085.3.1.4.2.4.1.2.1.1	AreaID	not-accessible	A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone.
I32 csOspfAreaLsaCksumSum	1.3.6.1.4.1.3085.3.1.4.2.4.1.2.1.8	Integer32	read-only	The 32-bit unsigned sum of the link-state ad- vertisements' LS checksums contained in this area's link-state database. This sum excludes external (LS type 5) link-state advertisements. The sum can be used to determine if there has been a change in a router's link state data- base, and to compare the link-state database of two routers.
G32 csOspfAreaLsaCount	1.3.6.1.4.1.3085.3.1.4.2.4.1.2.1.7	Gauge32	read-only	The total number of link-state advertisements in this area's link-state database, excluding AS External LSA's.
STR csOspfAreaName	1.3.6.1.4.1.3085.3.1.4.2.4.1.2.1.2	DisplayString	read-create	A descriptive name for this area.
OPE csOspfAreaOperStatus	1.3.6.1.4.1.3085.3.1.4.2.4.1.2.1.12	OperStatus	read-only	A operational status for the OSPF Area Table.
ROW csOspfAreaRowStatus	1.3.6.1.4.1.3085.3.1.4.2.4.1.2.1.11	RowStatus	read-create	A row status type for the OSPF Area Table.
INT csOspfAreaSummary	1.3.6.1.4.1.3085.3.1.4.2.4.1.2.1.9	INTEGER	read-create	The variable csOspfAreaSummary controls the im- port of summary LSAs into stub areas. It has no effect on other areas. If it is noAreaSummary, the router will neither originate nor propagate summary LSAs into the stub area. It will rely entirely on its de- fault route. If it is sendAreaSummary, the router will both summarize and propagate summary LSAs.
csOspfAreaTable	1.3.6.1.4.1.3085.3.1.4.2.4.1.2		not-accessible	Information describing the configured parame- ters of the router's attached areas.
G32 csOspfAsBdrRtrCount	1.3.6.1.4.1.3085.3.1.4.2.4.1.2.1.6	Gauge32	read-only	The total number of Autonomous System border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass.
T/F csOspfASBdrRtrStatus	1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.5	TruthValue	read-create	A flag to note whether this router is config- ured as an Autonomous System border router.
csOspfConf	1.3.6.1.4.1.3085.3.1.4.2.4.1
INT csOspfConfigErrorType	1.3.6.1.4.1.3085.3.1.4.2.4.2.1.2	INTEGER	read-only	Potential types of configuration conflicts. Used by the csOspfConfigError and csOspfConfigVir- tError traps.
T/F csOspfDemandExtensions	1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.14	TruthValue	read-create	The router's support for demand routing.
NUM csOspfExitOverflowInterval	1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.13	PositiveInteger	read-create	The number of seconds that, after entering OverflowState, a router will attempt to leave OverflowState. This allows the router to again originate non-default AS-external-LSAs. When set to 0, the router will not leave Overflow- State until restarted.
csOspfExpPolEntry	1.3.6.1.4.1.3085.3.1.4.2.4.1.14.1		not-accessible	Each entry represents a single import policy applied by the ospf layer on a Virtual Router.
I32 csOspfExpPolId	1.3.6.1.4.1.3085.3.1.4.2.4.1.14.1.1	Integer32	not-accessible	The Export Policy (see the corresponding entry in csExpPolTable) that is applied to this Virtual Router.
ROW csOspfExpPolStatus	1.3.6.1.4.1.3085.3.1.4.2.4.1.14.1.2	RowStatus	read-create	The RowStatus object for this table. This is used to add and delete entries from this table.
csOspfExpPolTable	1.3.6.1.4.1.3085.3.1.4.2.4.1.14		not-accessible	A set of Export Policies (see csExpPolTable) that are applied by ospf.
I32 csOspfExternLsaCksumSum	1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.7	Integer32	read-only	The 32-bit unsigned sum of the LS checksums of the external link-state advertisements con- tained in the link-state database. This sum can be used to determine if there has been a change in a router's link state database, and to compare the link-state database of two routers.
G32 csOspfExternLsaCount	1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.6	Gauge32	read-only	The number of external (LS type 5) link-state advertisements in the link-state database.
OCT csOspfExtLsdbAdvertisement	1.3.6.1.4.1.3085.3.1.4.2.4.1.11.1.7	OCTET STRING	read-only	The entire Link State Advertisement, including its header.
I32 csOspfExtLsdbAge	1.3.6.1.4.1.3085.3.1.4.2.4.1.11.1.5	Integer32	read-only	This field is the age of the link state adver- tisement in seconds.
I32 csOspfExtLsdbChecksum	1.3.6.1.4.1.3085.3.1.4.2.4.1.11.1.6	Integer32	read-only	This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum.
csOspfExtLsdbEntry	1.3.6.1.4.1.3085.3.1.4.2.4.1.11.1		not-accessible	A single Link State Advertisement.
I32 csOspfExtLsdbLimit	1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.11	Integer32	read-create	The maximum number of non-default AS- external-LSAs entries that can be stored in the link-state database. If the value is -1, then there is no limit. When the number of non-default AS-external-LSAs in a router's link-state database reaches csOspfExtLsdbLimit, the router enters Overflow- State. The router never holds more than csOspfExtLsdbLimit non-default AS-external-LSAs in its database. csOspfExtLsdbLimit MUST be set identically in all routers attached to the OSPF backbone and/or any regular OSPF area. (i.e., OSPF stub areas and NSSAs are excluded).
IP csOspfExtLsdbLsid	1.3.6.1.4.1.3085.3.1.4.2.4.1.11.1.2	IpAddress	not-accessible	The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
ROU csOspfExtLsdbRouterId	1.3.6.1.4.1.3085.3.1.4.2.4.1.11.1.3	RouterID	not-accessible	The 32 bit number that uniquely identifies the originating router in the Autonomous System.
I32 csOspfExtLsdbSequence	1.3.6.1.4.1.3085.3.1.4.2.4.1.11.1.4	Integer32	read-only	The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
csOspfExtLsdbTable	1.3.6.1.4.1.3085.3.1.4.2.4.1.11		not-accessible	The OSPF Process's Links State Database.
INT csOspfExtLsdbType	1.3.6.1.4.1.3085.3.1.4.2.4.1.11.1.1	INTEGER	not-accessible	The type of the link state advertisement. Each link state type has a separate advertise- ment format.
csOspfGeneralEntry	1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1		not-accessible	Information describing the configured parame- ters and cumulative statistics of one of the router's attached areas.
ROW csOspfGeneralEntryRowStatus	1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.15	RowStatus	read-create	A row status type for the OSPF General Table.
csOspfGeneralTable	1.3.6.1.4.1.3085.3.1.4.2.4.1.1		not-accessible	Information describing the configured parame- ters and cumulative statistics of the router's attached areas.
ARE csOspfHostAreaID	1.3.6.1.4.1.3085.3.1.4.2.4.1.5.1.5	AreaID	read-only	The Area the Host Entry is to be found within. By default, the area that a subsuming OSPF in- terface is in, or 0.0.0.0
csOspfHostEntry	1.3.6.1.4.1.3085.3.1.4.2.4.1.5.1		not-accessible	A metric to be advertised, for a given type of service, when a given host is reachable.
IP csOspfHostIpAddress	1.3.6.1.4.1.3085.3.1.4.2.4.1.5.1.1	IpAddress	not-accessible	The IP Address of the Host.
MET csOspfHostMetric	1.3.6.1.4.1.3085.3.1.4.2.4.1.5.1.3	Metric	read-create	The Metric to be advertised.
ROW csOspfHostStatus	1.3.6.1.4.1.3085.3.1.4.2.4.1.5.1.4	RowStatus	read-create	This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
csOspfHostTable	1.3.6.1.4.1.3085.3.1.4.2.4.1.5		not-accessible	The list of Hosts, and their metrics, that the router will advertise as host routes.
TOS csOspfHostTOS	1.3.6.1.4.1.3085.3.1.4.2.4.1.5.1.2	TOSType	not-accessible	The Type of Service of the route being config- ured.
STA csOspfIfAdminStatus	1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.5	Status	read-create	The OSPF interface's administrative status. The value formed on the interface, and the in- terface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is external to OSPF.
INT csOspfIfAdvertiseSubnet	1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.21	INTEGER	read-create	Enable/Disable advertise-subnet capability.
ARE csOspfIfAreaId	1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.3	AreaID	read-create	A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone.
OCT csOspfIfAuthKey	1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.17	OCTET STRING	read-create	The Authentication Key. If the Area's Author- ization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. Note that unauthenticated interfaces need no authentication key, and simple password authen- tication cannot use a key of more than 8 oc- tets. Larger keys are useful only with authen- tication mechanisms not specified in this docu- ment. When read, csOspfIfAuthKey always returns an Oc- tet String of length zero.
INT csOspfIfAuthType	1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.16	INTEGER	read-create	The authentication type specified for this area.
IP csOspfIfBackupDesignatedRouter	1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.14	IpAddress	read-only	The IP Address of the Backup Designated Router.
T/F csOspfIfDemand	1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.19	TruthValue	read-create	Indicates whether Demand OSPF procedures (hel- lo supression to FULL neighbors and setting the DoNotAge flag on proogated LSAs) should be per- formed on this interface.
IP csOspfIfDesignatedRouter	1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.13	IpAddress	read-only	The IP Address of the Designated Router.
csOspfIfEntry	1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1		not-accessible	The OSPF Interface Entry describes one inter- face from the viewpoint of OSPF.
C32 csOspfIfEvents	1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.15	Counter32	read-only	The number of times this OSPF interface has changed its state, or an error has occurred.
HEL csOspfIfHelloInterval	1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.9	HelloRange	read-create	The length of time, in seconds, between the Hello packets that the routers within this area send on the interface. This value must be the same for all routers attached to a common network.
IP csOspfIfIpAddress	1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.1	IpAddress	read-only	The IP address of this OSPF interface.
csOspfIfMd5Entry	1.3.6.1.4.1.3085.3.1.4.2.4.1.15.1		not-accessible	The OSPF Interface Entry contains the MD5 authentication structure corresponding to one inter-face from the viewpoint of OSPF.
OCT csOspfIfMd5Key	1.3.6.1.4.1.3085.3.1.4.2.4.1.15.1.2	OCTET STRING	read-create	Message-digest authentication string for this interface. The string is encrypted using an algorithm specified by a shared secret key.
I32 csOspfIfMd5MessageDigestKeyId	1.3.6.1.4.1.3085.3.1.4.2.4.1.15.1.1	Integer32	not-accessible	Message-digest authentication key. A shared secret key that is configured on all routers to specify the decryption algorithm to be used.
ROW csOspfIfMd5RowStatus	1.3.6.1.4.1.3085.3.1.4.2.4.1.15.1.3	RowStatus	read-create	This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
csOspfIfMd5Table	1.3.6.1.4.1.3085.3.1.4.2.4.1.15		not-accessible	The OSPF Interface MD5 table contains a list of MD5 authentication structures and the corresponding MD5 authentication IDs for the inter- faces from the viewpoint of OSPF.
MET csOspfIfMetric	1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.20	Metric	read-create	The metric of using this type of service on this interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed. Note: this is added for the support of TOS 0 Metric value, It will be deprecated later when TOS is supported and the csOspfIfMetricTable is being used.
I32 csOspfIfMetricAddressLessIf	1.3.6.1.4.1.3085.3.1.4.2.4.1.7.1.2	Integer32	not-accessible	For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the value of ifIndex for in- terfaces having no IP Address. On row crea- tion, this can be derived from the instance.
csOspfIfMetricEntry	1.3.6.1.4.1.3085.3.1.4.2.4.1.7.1		not-accessible	A particular TOS metric for a non-virtual in- terface identified by the interface index.
IP csOspfIfMetricIpAddress	1.3.6.1.4.1.3085.3.1.4.2.4.1.7.1.1	IpAddress	not-accessible	The IP address of this OSPF interface. On row creation, this can be derived from the in- stance.
ROW csOspfIfMetricStatus	1.3.6.1.4.1.3085.3.1.4.2.4.1.7.1.5	RowStatus	read-create	This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
csOspfIfMetricTable	1.3.6.1.4.1.3085.3.1.4.2.4.1.7		not-accessible	The TOS metrics for a non-virtual interface identified by the interface index.
TOS csOspfIfMetricTOS	1.3.6.1.4.1.3085.3.1.4.2.4.1.7.1.3	TOSType	not-accessible	The type of service metric being referenced. On row creation, this can be derived from the instance.
MET csOspfIfMetricValue	1.3.6.1.4.1.3085.3.1.4.2.4.1.7.1.4	Metric	read-create	The metric of using this type of service on this interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed.
INT csOspfIfMulticastForwarding	1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.18	INTEGER	read-create	The way multicasts should forwarded on this interface; not forwarded, forwarded as data link multicasts, or forwarded as data link uni- casts. Data link multicasting is not meaning- ful on point to point and NBMA interfaces, and setting csOspfMulticastForwarding to 0 effective- ly disables all multicast forwarding.
T/F csOspfIfPassive	1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.23	TruthValue	read-create	Indicates whether OSPF interface is passive. OSPF Hello packets not sent on this interface.
NUM csOspfIfPollInterval	1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.11	PositiveInteger	read-create	The larger time interval, in seconds, between the Hello packets sent to an inactive non- broadcast multi- access neighbor.
UPT csOspfIfRetransInterval	1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.8	UpToMaxAge	read-create	The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database descrip- tion and link-state request packets.
NUM csOspfIfRtrDeadInterval	1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.10	PositiveInteger	read-create	The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network.
DES csOspfIfRtrPriority	1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.6	DesignatedRouterPriority	read-create	The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligi- ble to become the designated router on this particular network. In the event of a tie in this value, routers will use their Router ID as a tie breaker.
INT csOspfIfState	1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.12	INTEGER	read-only	The OSPF Interface State.
ROW csOspfIfStatus	1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.22	RowStatus	read-create	A row status type for the OSPF Interface Table.
csOspfIfTable	1.3.6.1.4.1.3085.3.1.4.2.4.1.6		not-accessible	The OSPF Interface Table describes the inter- faces from the viewpoint of OSPF.
UPT csOspfIfTransitDelay	1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.7	UpToMaxAge	read-create	The estimated number of seconds it takes to transmit a link state update packet over this interface.
INT csOspfIfType	1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.4	INTEGER	read-create	The OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broad- cast LANs, such as Ethernet and IEEE 802.5, take the value 'broadcast', X.25 and similar technologies take the value 'nbma', and links that are definitively point to point take the value 'pointToPoint'.
INT csOspfImportAsExtern	1.3.6.1.4.1.3085.3.1.4.2.4.1.2.1.3	INTEGER	read-create	The area's support for importing AS external link- state advertisements.
csOspfImpPolEntry	1.3.6.1.4.1.3085.3.1.4.2.4.1.13.1		not-accessible	Each entry represents a single import policy applied by the ospf layer on a Virtual Router.
I32 csOspfImpPolId	1.3.6.1.4.1.3085.3.1.4.2.4.1.13.1.1	Integer32	not-accessible	The Import Policy (see the corresponding entry in csImpPolTable) that is applied to this Virtual Router.
ROW csOspfImpPolStatus	1.3.6.1.4.1.3085.3.1.4.2.4.1.13.1.2	RowStatus	read-create	The RowStatus object for this table. This is used to add and delete entries from this table.
csOspfImpPolTable	1.3.6.1.4.1.3085.3.1.4.2.4.1.13		not-accessible	A set of Import Policies (see csImpPolTable) that are applied by ospf.
OCT csOspfLsdbAdvertisement	1.3.6.1.4.1.3085.3.1.4.2.4.1.4.1.8	OCTET STRING	read-only	The entire Link State Advertisement, including its header.
I32 csOspfLsdbAge	1.3.6.1.4.1.3085.3.1.4.2.4.1.4.1.6	Integer32	read-only	This field is the age of the link state adver- tisement in seconds.
ARE csOspfLsdbAreaId	1.3.6.1.4.1.3085.3.1.4.2.4.1.4.1.1	AreaID	read-only	The 32 bit identifier of the Area from which the LSA was received.
I32 csOspfLsdbChecksum	1.3.6.1.4.1.3085.3.1.4.2.4.1.4.1.7	Integer32	read-only	This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum.
csOspfLsdbEntry	1.3.6.1.4.1.3085.3.1.4.2.4.1.4.1		not-accessible	A single Link State Advertisement.
IP csOspfLsdbLsid	1.3.6.1.4.1.3085.3.1.4.2.4.1.4.1.3	IpAddress	read-only	The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
ROU csOspfLsdbRouterId	1.3.6.1.4.1.3085.3.1.4.2.4.1.4.1.4	RouterID	read-only	The 32 bit number that uniquely identifies the originating router in the Autonomous System.
I32 csOspfLsdbSequence	1.3.6.1.4.1.3085.3.1.4.2.4.1.4.1.5	Integer32	read-only	The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
csOspfLsdbTable	1.3.6.1.4.1.3085.3.1.4.2.4.1.4		not-accessible	The OSPF Process's Link State Database.
INT csOspfLsdbType	1.3.6.1.4.1.3085.3.1.4.2.4.1.4.1.2	INTEGER	read-only	The type of the link state advertisement. Each link state type has a separate advertise- ment format.
I32 csOspfMulticastExtensions	1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.12	Integer32	read-create	A Bit Mask indicating whether the router is forwarding IP multicast (Class D) datagrams based on the algorithms defined in the Multi- cast Extensions to OSPF. Bit 0, if set, indicates that the router can forward IP multicast datagrams in the router's directly attached areas (called intra-area mul- ticast routing). Bit 1, if set, indicates that the router can forward IP multicast datagrams between OSPF areas (called inter-area multicast routing). Bit 2, if set, indicates that the router can forward IP multicast datagrams between Auto- nomous Systems (called inter-AS multicast rout- ing). Only certain combinations of bit settings are allowed, namely: 0 (no multicast forwarding is enabled), 1 (intra-area multicasting only), 3 (intra-area and inter-area multicasting), 5 (intra-area and inter-AS multicasting) and 7 (multicasting everywhere). By default, no mul- ticast forwarding is enabled.
INT csOspfNbmaNbrPermanence	1.3.6.1.4.1.3085.3.1.4.2.4.1.9.1.10	INTEGER	read-only	This variable displays the status of the en- try. 'dynamic' and 'permanent' refer to how the neighbor became known.
ROW csOspfNbmaNbrStatus	1.3.6.1.4.1.3085.3.1.4.2.4.1.9.1.9	RowStatus	read-create	This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
NUM csOspfNbrAddressLessIndex	1.3.6.1.4.1.3085.3.1.4.2.4.1.9.1.2	InterfaceIndex	read-only	On an interface having an IP Address, zero. On addressless interfaces, the corresponding value of ifIndex in the Internet Standard MIB. On row creation, this can be derived from the instance.
csOspfNbrEntry	1.3.6.1.4.1.3085.3.1.4.2.4.1.9.1		not-accessible	The information regarding a single neighbor.
C32 csOspfNbrEvents	1.3.6.1.4.1.3085.3.1.4.2.4.1.9.1.7	Counter32	read-only	The number of times this neighbor relationship has changed state, or an error has occurred.
T/F csOspfNbrHelloSuppressed	1.3.6.1.4.1.3085.3.1.4.2.4.1.9.1.11	TruthValue	read-only	Indicates whether Hellos are being suppressed to the neighbor
IP csOspfNbrIpAddr	1.3.6.1.4.1.3085.3.1.4.2.4.1.9.1.1	IpAddress	read-only	The IP address this neighbor is using in its IP Source Address. Note that, on addressless links, this will not be 0.0.0.0, but the ad- dress of another of the neighbor's interfaces.
G32 csOspfNbrLsRetransQLen	1.3.6.1.4.1.3085.3.1.4.2.4.1.9.1.8	Gauge32	read-only	The current length of the retransmission queue.
I32 csOspfNbrOptions	1.3.6.1.4.1.3085.3.1.4.2.4.1.9.1.4	Integer32	read-only	A Bit Mask corresponding to the neighbor's op- tions field. Bit 0, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric. Bit 1, if set, indicates that the associated area accepts and operates on external informa- tion; if zero, it is a stub area. Bit 2, if set, indicates that the system is ca- pable of routing IP Multicast datagrams; i.e., that it implements the Multicast Extensions to OSPF. Bit 3, if set, indicates that the associated area is an NSSA. These areas are capable of carrying type 7 external advertisements, which are translated into type 5 external advertise- ments at NSSA borders.
DES csOspfNbrPriority	1.3.6.1.4.1.3085.3.1.4.2.4.1.9.1.5	DesignatedRouterPriority	read-create	The priority of this neighbor in the designat- ed router election algorithm. The value 0 sig- nifies that the neighbor is not eligible to be- come the designated router on this particular network.
ROU csOspfNbrRtrId	1.3.6.1.4.1.3085.3.1.4.2.4.1.9.1.3	RouterID	read-only	A 32-bit integer (represented as a type IpAd- dress) uniquely identifying the neighboring router in the Autonomous System.
INT csOspfNbrState	1.3.6.1.4.1.3085.3.1.4.2.4.1.9.1.6	INTEGER	read-only	The State of the relationship with this Neigh- bor.
csOspfNbrTable	1.3.6.1.4.1.3085.3.1.4.2.4.1.9		not-accessible	A table of non-virtual neighbor information.
C32 csOspfOriginateNewLsas	1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.9	Counter32	read-only	The number of new link-state advertisements that have been originated. This number is in- cremented each time the router originates a new LSA.
IP csOspfPacketSrc	1.3.6.1.4.1.3085.3.1.4.2.4.2.1.4	IpAddress	read-only	The IP address of an inbound packet that can- not be identified by a neighbor instance.
INT csOspfPacketType	1.3.6.1.4.1.3085.3.1.4.2.4.2.1.3	INTEGER	read-only	OSPF packet types.
INT csOspfPrefExt	1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.20	INTEGER	read-create	The route preference given to a route external to an Autonomous System.
INT csOspfPrefInt	1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.19	INTEGER	read-create	The route preference given to a route internal to an Autonomous System.
INT csOspfRefBw	1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.18	INTEGER	read-create	The reference bandwidth used to calculate the default interface metric.
ROU csOspfRouterId	1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.1	RouterID	read-create	A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the router's IP interface addresses.
C32 csOspfRxNewLsas	1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.10	Counter32	read-only	The number of link-state advertisements re- ceived determined to be new instantiations. This number does not include newer instantia- tions of self-originated link-state advertise- ments.
OCT csOspfSetTrap	1.3.6.1.4.1.3085.3.1.4.2.4.2.1.1	OCTET STRING	read-write	A four-octet string serving as a bit map for the trap events defined by the OSPF traps. This object is used to enable and disable specific OSPF traps where a 1 in the bit field represents enabled. The right-most bit (least significant) represents trap 0.
INT csOspfSpfDelay	1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.16	INTEGER	read-create	The time delay between an OSPF topology change and an SPF calculation.
INT csOspfSpfHold	1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.17	INTEGER	read-create	The time between two consecutive SPF calculations.
C32 csOspfSpfRuns	1.3.6.1.4.1.3085.3.1.4.2.4.1.2.1.4	Counter32	read-only	The number of times that the intra-area route table has been calculated using this area's link-state database. This is typically done using Dijkstra's algorithm.
csOspfStubAreaEntry	1.3.6.1.4.1.3085.3.1.4.2.4.1.3.1		not-accessible	The metric for a given Type of Service that will be advertised by a default Area Border Router into a stub area.
ARE csOspfStubAreaId	1.3.6.1.4.1.3085.3.1.4.2.4.1.3.1.1	AreaID	not-accessible	The 32 bit identifier for the Stub Area. On creation, this can be derived from the in- stance.
csOspfStubAreaTable	1.3.6.1.4.1.3085.3.1.4.2.4.1.3		not-accessible	The set of metrics that will be advertised by a default Area Border Router into a stub area.
BIG csOspfStubMetric	1.3.6.1.4.1.3085.3.1.4.2.4.1.3.1.3	BigMetric	read-create	The metric value applied at the indicated type of service. By default, this equals the least metric at the type of service among the inter- faces to other areas.
INT csOspfStubMetricType	1.3.6.1.4.1.3085.3.1.4.2.4.1.3.1.5	INTEGER	read-create	This variable displays the type of metric ad- vertised as a default route.
ROW csOspfStubStatus	1.3.6.1.4.1.3085.3.1.4.2.4.1.3.1.4	RowStatus	read-create	This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
TOS csOspfStubTOS	1.3.6.1.4.1.3085.3.1.4.2.4.1.3.1.2	TOSType	not-accessible	The Type of Service associated with the metric. On creation, this can be derived from the instance.
T/F csOspfTOSSupport	1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.8	TruthValue	read-create	The router's support for type-of-service rout- ing.
csOspfTrap	1.3.6.1.4.1.3085.3.1.4.2.4.2
csOspfTrapControl	1.3.6.1.4.1.3085.3.1.4.2.4.2.1
INT csOspfVersionNumber	1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.3	INTEGER	read-only	The current version number of the OSPF protocol is 2.
ARE csOspfVirtIfAreaId	1.3.6.1.4.1.3085.3.1.4.2.4.1.8.1.1	AreaID	read-only	The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0
OCT csOspfVirtIfAuthKey	1.3.6.1.4.1.3085.3.1.4.2.4.1.8.1.10	OCTET STRING	read-create	If Authentication Type is simplePassword, the device will left adjust and zero fill to 8 oc- tets. Note that unauthenticated interfaces need no authentication key, and simple password authen- tication cannot use a key of more than 8 oc- tets. Larger keys are useful only with authen- tication mechanisms not specified in this docu- ment. When read, csOspfVifAuthKey always returns a string of length zero.
INT csOspfVirtIfAuthType	1.3.6.1.4.1.3085.3.1.4.2.4.1.8.1.9	INTEGER	read-create	The authentication type specified for a virtu- al interface. Additional authentication types may be assigned locally.
csOspfVirtIfEntry	1.3.6.1.4.1.3085.3.1.4.2.4.1.8.1		not-accessible	Information about a single Virtual Interface.
C32 csOspfVirtIfEvents	1.3.6.1.4.1.3085.3.1.4.2.4.1.8.1.8	Counter32	read-only	The number of state changes or error events on this Virtual Link
HEL csOspfVirtIfHelloInterval	1.3.6.1.4.1.3085.3.1.4.2.4.1.8.1.5	HelloRange	read-create	The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for the virtual neighbor.
ROU csOspfVirtIfNeighbor	1.3.6.1.4.1.3085.3.1.4.2.4.1.8.1.2	RouterID	read-only	The Router ID of the Virtual Neighbor.
UPT csOspfVirtIfRetransInterval	1.3.6.1.4.1.3085.3.1.4.2.4.1.8.1.4	UpToMaxAge	read-create	The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database descrip- tion and link-state request packets. This value should be well over the expected round- trip time.
NUM csOspfVirtIfRtrDeadInterval	1.3.6.1.4.1.3085.3.1.4.2.4.1.8.1.6	PositiveInteger	read-create	The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neigh- bor.
INT csOspfVirtIfState	1.3.6.1.4.1.3085.3.1.4.2.4.1.8.1.7	INTEGER	read-only	OSPF virtual interface states.
ROW csOspfVirtIfStatus	1.3.6.1.4.1.3085.3.1.4.2.4.1.8.1.11	RowStatus	read-create	This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
csOspfVirtIfTable	1.3.6.1.4.1.3085.3.1.4.2.4.1.8		not-accessible	Information about this router's virtual inter- faces.
UPT csOspfVirtIfTransitDelay	1.3.6.1.4.1.3085.3.1.4.2.4.1.8.1.3	UpToMaxAge	read-create	The estimated number of seconds it takes to transmit a link- state update packet over this interface.
ARE csOspfVirtNbrArea	1.3.6.1.4.1.3085.3.1.4.2.4.1.10.1.1	AreaID	read-only	The Transit Area Identifier.
csOspfVirtNbrEntry	1.3.6.1.4.1.3085.3.1.4.2.4.1.10.1		not-accessible	Virtual neighbor information.
C32 csOspfVirtNbrEvents	1.3.6.1.4.1.3085.3.1.4.2.4.1.10.1.6	Counter32	read-only	The number of times this virtual link has changed its state, or an error has occurred.
T/F csOspfVirtNbrHelloSuppressed	1.3.6.1.4.1.3085.3.1.4.2.4.1.10.1.8	TruthValue	read-only	Indicates whether Hellos are being suppressed to the neighbor
IP csOspfVirtNbrIpAddr	1.3.6.1.4.1.3085.3.1.4.2.4.1.10.1.3	IpAddress	read-only	The IP address this Virtual Neighbor is us- ing.
G32 csOspfVirtNbrLsRetransQLen	1.3.6.1.4.1.3085.3.1.4.2.4.1.10.1.7	Gauge32	read-only	The current length of the retransmission queue.
I32 csOspfVirtNbrOptions	1.3.6.1.4.1.3085.3.1.4.2.4.1.10.1.4	Integer32	read-only	A Bit Mask corresponding to the neighbor's op- tions field. Bit 1, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric. Bit 2, if set, indicates that the system is Network Multicast capable; ie, that it imple- ments OSPF Multicast Routing.
ROU csOspfVirtNbrRtrId	1.3.6.1.4.1.3085.3.1.4.2.4.1.10.1.2	RouterID	read-only	A 32-bit integer uniquely identifying the neighboring router in the Autonomous System.
INT csOspfVirtNbrState	1.3.6.1.4.1.3085.3.1.4.2.4.1.10.1.5	INTEGER	read-only	The state of the Virtual Neighbor Relation- ship.
csOspfVirtNbrTable	1.3.6.1.4.1.3085.3.1.4.2.4.1.10		not-accessible	A table of virtual neighbor information.
csPolicyRouteFilterEntry	1.3.6.1.4.1.3085.3.1.4.2.1.2.6.1		not-accessible	Each table entry contains information about a single route filter.
INT csPolicyRouteFilterMatchType	1.3.6.1.4.1.3085.3.1.4.2.1.2.6.1.3	INTEGER	not-accessible	The match type for this entry. exact: the route prefix should match csPolicyRouteFilterPrefix and prefix-length should be equal to csPolicyRouteFilterPrefixLen. longer: csPolicyRouteFilterPrefix matches the route-prefix exactly and csPolicyRouteFilterPrefixLen is greater than prefix-length. orlonger: csPolicyRouteFilterPrefix matches the route-prefix exactly and csPolicyRouteFilterPrefixLen is greater than prefix-length. upto: the most significant bits of csPolicyRouteFilterPrefix and the route-prefix match for csPolicyRouteFilterPrefixLen bits; the route's prefix length is between csPolicyRouteFilterPrefixLen and csPolicyRouteFilterPrefixLen2 (inclusive). through: the following condition should match. - prefix matches csPolicyRouteFilterPrefix - prefix matches csPolicyRouteFilterPrefix2 for route's prefix length bits (most significant) - prefix length is less than or equal to csPolicyRouteFilterPrefixLen2.
IP csPolicyRouteFilterPrefix	1.3.6.1.4.1.3085.3.1.4.2.1.2.6.1.1	IpAddress	not-accessible	The IP prefix for this route-filter entry.
IP csPolicyRouteFilterPrefix2	1.3.6.1.4.1.3085.3.1.4.2.1.2.6.1.4	IpAddress	not-accessible	The second prefix for this entry. This is used to specify the route range. This object is valid only if csPolicyRouteFilterMatchType value is 'through'. Otherwise the value should be set to 0.0.0.0
I32 csPolicyRouteFilterPrefixLen	1.3.6.1.4.1.3085.3.1.4.2.1.2.6.1.2	Integer32	not-accessible	The prefix length for this entry.
I32 csPolicyRouteFilterPrefixLen2	1.3.6.1.4.1.3085.3.1.4.2.1.2.6.1.5	Integer32	not-accessible	The second prefix length for this entry. This is used specify the prefix-length range. This object is valid only if csPolicyRouteFilterMatchType value is 'upto' or 'through'. Otherwise the value should be set to 0.
ROW csPolicyRouteFilterRowStatus	1.3.6.1.4.1.3085.3.1.4.2.1.2.6.1.9	RowStatus	read-create	The RowStatus object for this table. This is used to add/delete rows from this table.
I32 csPolicyRouteFilterSeqNum	1.3.6.1.4.1.3085.3.1.4.2.1.2.6.1.6	Integer32	read-create	The sequence number of the prefix entry. The entries within a route-filter list are evaluated using the longest prefix match rule. If more than one entry have the same prefixe i.e., csPolicyRouteFilterPrefix and csPolicyRouteFilterPrefixLen match then they are evaluated in the ascending order of sequence numbers.
csPolicyRouteFilterTable	1.3.6.1.4.1.3085.3.1.4.2.1.2.6		not-accessible	This table holds policy related route filter entries. A route filter is a prefix or prefix-range with an associated action. A route filter may have action attributes associtaed with it. A route filter is identified by the isame csRtPolicyName and csRtPolicyTermName attributes constitute the route-filter list of a policy term. Route-filters within a list are processed in the ascending order of csPolicyRouteFilterSeqNum attribute if the prefix/mask are the same; otherwise the longest prefix match first rule is used.
I32 csPolicyRouteFilterTableEnd	1.3.6.1.4.1.3085.3.1.4.2.1.2.7	Integer32	read-only	End of this group. value undefined
INT csPosAdminStatus	1.3.6.1.4.1.3085.3.1.3.6.1.1.5	INTEGER	read-write	This object is used to enable/disable this POS interface.
INT csPosEncapsulation	1.3.6.1.4.1.3085.3.1.3.6.1.1.4	INTEGER	read-write	This object identifies the encapsulation format used on this Packet Over Sonet port.
csPOSInfo	1.3.6.1.4.1.3085.3.1.3.6
csPosInterfaceConfEntry	1.3.6.1.4.1.3085.3.1.3.6.1.1		not-accessible
I32 csPosInterfaceConfModuleIndex	1.3.6.1.4.1.3085.3.1.3.6.1.1.2	Integer32	not-accessible	This object identifies the specific module of this POS blade.
I32 csPosInterfaceConfPortIndex	1.3.6.1.4.1.3085.3.1.3.6.1.1.3	Integer32	not-accessible	This object identifies the blade to which this POS Port is attached. Together with csPosInterfaceConfPortIndex, it uniquely identifies a physical port.
I32 csPosInterfaceConfSlotIndex	1.3.6.1.4.1.3085.3.1.3.6.1.1.1	Integer32	not-accessible	This object identifies the blade to which this POS Port is attached. Together with csPosInterfaceConfPortIndex, it uniquely identifies a physical port.
csPosInterfaceConfTable	1.3.6.1.4.1.3085.3.1.3.6.1		not-accessible
OPE csPosOperStatus	1.3.6.1.4.1.3085.3.1.3.6.1.1.6	OperStatus	read-only	This object indicates the current operational status of this POS interface.
csPppoeAcConfig	1.3.6.1.4.1.3085.3.1.6.17.1
I32 csPppoeAcIfChannelIndex	1.3.6.1.4.1.3085.3.1.6.17.1.1.1.4	Integer32	not-accessible	This object identifies the channel number.
INT csPppoeAcIfConfigAdminStatus	1.3.6.1.4.1.3085.3.1.6.17.1.1.1.13	INTEGER	read-write	This object is used to enable or disable this PPPoE AC.
csPppoeAcIfConfigEntry	1.3.6.1.4.1.3085.3.1.6.17.1.1.1		not-accessible	This list contains PPPoE Access Concentrator Servers.
EVL csPppoeAcIfConfigEvLogArea	1.3.6.1.4.1.3085.3.1.6.17.1.1.1.19	EvLogArea	read-write	This object is used to set the area of event logs for ATM Port. This value will not be applied to VCCs. Events which area is not specified in this object will not be logged.
EVL csPppoeAcIfConfigEvLogLevel	1.3.6.1.4.1.3085.3.1.6.17.1.1.1.18	EvLogLevel	read-write	This object is used to set the level for details for event logs for PPPoE AC. Events with level higher than this object will not be logged.
I32 csPppoeAcIfConfigMaxSessions	1.3.6.1.4.1.3085.3.1.6.17.1.1.1.6	Integer32	read-write	Maximum sesions that it can accepted on this AC.
I32 csPppoeAcIfConfigMaxSessionsPerHost	1.3.6.1.4.1.3085.3.1.6.17.1.1.1.7	Integer32	read-write	Maximum number of sessions that this AC can accept from a given host.
STR csPppoeAcIfConfigName	1.3.6.1.4.1.3085.3.1.6.17.1.1.1.12	DisplayString	read-write	This object conatins the name of this PPPoE AC.
OPE csPppoeAcIfConfigOperStatus	1.3.6.1.4.1.3085.3.1.6.17.1.1.1.14	OperStatus	read-only	This object contains operational status of PPPoE AC. This object value depends on operational status of corresponding underneath interface.
OCT csPppoeAcIfConfigPortEthernetAddress	1.3.6.1.4.1.3085.3.1.6.17.1.1.1.10	OCTET STRING	read-only	This object conatins the MAC Address of this PPPoE AC.
STR csPppoeAcIfConfigServiceTemplateProfile	1.3.6.1.4.1.3085.3.1.6.17.1.1.1.15	DisplayString	read-write	This object contains service template, a list of connection profiles, serves the purpose of service name concept in PPPOE AC.
csPppoeAcIfConfigTable	1.3.6.1.4.1.3085.3.1.6.17.1.1		not-accessible	PPPoE Access Concentrators in given sub-interface (of ATM or FR).
I32 csPppoeAcIfConfigTableEnd	1.3.6.1.4.1.3085.3.1.6.17.1.2	Integer32	read-only	End of this group. value undefined
I32 csPppoeAcIfConfigTotalActiveSessions	1.3.6.1.4.1.3085.3.1.6.17.1.1.1.9	Integer32	read-only	Total Number of active sessions in this AC.
I32 csPppoeAcIfConfigTotalSessions	1.3.6.1.4.1.3085.3.1.6.17.1.1.1.8	Integer32	read-only	Total Number of sessions established with this AC subjecting to maximum of csPppoeAcIfConfigMaxSessions.
INT csPppoeAcIfConfigVolunteerServiceAdvertising	1.3.6.1.4.1.3085.3.1.6.17.1.1.1.11	INTEGER	read-write	If this object contains 'enable' then it advertise service profiles in PADO packets
I32 csPppoeAcIfModuleIndex	1.3.6.1.4.1.3085.3.1.6.17.1.1.1.2	Integer32	not-accessible	This object identifies the module of the blade to which this instance of AC is created.
I32 csPppoeAcIfPortIndex	1.3.6.1.4.1.3085.3.1.6.17.1.1.1.3	Integer32	not-accessible	This object identifies the port in the blade csPppoeAcIfSlotIndex to which this instance of AC is created.
I32 csPppoeAcIfSlotIndex	1.3.6.1.4.1.3085.3.1.6.17.1.1.1.1	Integer32	not-accessible	This object identifies the blade to which this instance of AC is created.
C64 csPppoeAcIfStatAccessVRFails	1.3.6.1.4.1.3085.3.1.6.17.3.1.1.15	Counter64	read-only	This object contains the number of failures while contacting Access VR for service names on PPPoE AC.
C64 csPppoeAcIfStatACSystemErrors	1.3.6.1.4.1.3085.3.1.6.17.3.1.1.13	Counter64	read-only	This object contains the number of PPPoE AC-System-Error tags received/transmitted by this PPPoE AC.
csPppoeAcIfStatEntry	1.3.6.1.4.1.3085.3.1.6.17.3.1.1		not-accessible	A set of statistics for a single PPPoE Access Concentrator.
C64 csPppoeAcIfStatGenericErrorReceive	1.3.6.1.4.1.3085.3.1.6.17.3.1.1.9	Counter64	read-only	This object contains the number of PPPoE Generic-Error tags received by this PPPoE AC.
C64 csPppoeAcIfStatGenericErrorTransmit	1.3.6.1.4.1.3085.3.1.6.17.3.1.1.10	Counter64	read-only	This object contains the number of PPPoE Generic-Error tags transmitted by this PPPoE AC.
C64 csPppoeAcIfStatMalformedPkts	1.3.6.1.4.1.3085.3.1.6.17.3.1.1.11	Counter64	read-only	This object contains the number of malformed packets received by this PPPoE AC.
C64 csPppoeAcIfStatPADIReceive	1.3.6.1.4.1.3085.3.1.6.17.3.1.1.1	Counter64	read-only	This object contains the number of PADI received by this PPPoE AC.
C64 csPppoeAcIfStatPADIReject	1.3.6.1.4.1.3085.3.1.6.17.3.1.1.2	Counter64	read-only	This object contains the number of PADI discarded by this PPPoE AC.
C64 csPppoeAcIfStatPADOTransmit	1.3.6.1.4.1.3085.3.1.6.17.3.1.1.5	Counter64	read-only	This object contains the number of PADO transmitted by this PPPoE AC.
C64 csPppoeAcIfStatPADRReceive	1.3.6.1.4.1.3085.3.1.6.17.3.1.1.3	Counter64	read-only	This object contains the number of PADR received by this PPPoE AC.
C64 csPppoeAcIfStatPADRReject	1.3.6.1.4.1.3085.3.1.6.17.3.1.1.4	Counter64	read-only	This object contains the number of PADR discarded by this PPPoE AC.
C64 csPppoeAcIfStatPADSTransmit	1.3.6.1.4.1.3085.3.1.6.17.3.1.1.6	Counter64	read-only	This object contains the number of PADS transmitted by this PPPoE AC.
C64 csPppoeAcIfStatPADTReceive	1.3.6.1.4.1.3085.3.1.6.17.3.1.1.7	Counter64	read-only	This object contains the number of PADT received by this PPPoE AC.
C64 csPppoeAcIfStatPADTTransmit	1.3.6.1.4.1.3085.3.1.6.17.3.1.1.8	Counter64	read-only	This object contains the number of PADT transmitted by this PPPoE AC.
C64 csPppoeAcIfStatPppAuthFails	1.3.6.1.4.1.3085.3.1.6.17.3.1.1.14	Counter64	read-only	This object contains the number of PPP authentication failures for sessions created on PPPoE AC.
C64 csPppoeAcIfStatServiceNameErrors	1.3.6.1.4.1.3085.3.1.6.17.3.1.1.12	Counter64	read-only	This object contains the number of PPPoE Service-Name-Error tags received/transmitted by this PPPoE AC.
csPppoeAcIfStatTable	1.3.6.1.4.1.3085.3.1.6.17.3.1		not-accessible	The PPPoE Access Concentrators statistics counter table.
I32 csPppoeAcIfSubIfIndex	1.3.6.1.4.1.3085.3.1.6.17.1.1.1.5	Integer32	not-accessible	This object identifies the sub-if number.
INT csPppoeConfigPppIfAuth	1.3.6.1.4.1.3085.3.1.6.17.1.1.1.16	INTEGER	read-write	The type of authentication used by PPP over pppoe sessions on this PPPoE AC server.
I32 csPppoeConfigPppIfEchoTimeout	1.3.6.1.4.1.3085.3.1.6.17.1.1.1.17	Integer32	read-write	The echo timeout (keepalive) in seconds.
csPppoeSession	1.3.6.1.4.1.3085.3.1.6.17.2
I32 csPppoeSessionDuration	1.3.6.1.4.1.3085.3.1.6.17.2.1.1.6	Integer32	read-only	This object contains the duration for this session since its establishment.
csPppoeSessionEntry	1.3.6.1.4.1.3085.3.1.6.17.2.1.1		not-accessible	This list contains PPPoE Sessions in a given Access Concentrator Server.
I32 csPppoeSessionId	1.3.6.1.4.1.3085.3.1.6.17.2.1.1.2	Integer32	not-accessible	This object contains the session identifier for this session as assigned by the PPPoE AC in the PADS message.
STR csPppoeSessionIPPoolNameInUse	1.3.6.1.4.1.3085.3.1.6.17.2.1.1.7	DisplayString	read-only	This object contains the IP Address Pool Name which is used to dynamically allocate IP Addresses.
OPE csPppoeSessionOperStatus	1.3.6.1.4.1.3085.3.1.6.17.2.1.1.3	OperStatus	read-only	This object contains the operational status for this session.
OCT csPppoeSessionPeerAddress	1.3.6.1.4.1.3085.3.1.6.17.2.1.1.4	OCTET STRING	read-only	This object contains the MAC address for this session peer.
C64 csPppoeSessionReceivedErrors	1.3.6.1.4.1.3085.3.1.6.17.2.1.1.16	Counter64	read-only	This object contains the number of session packets received and having protocol header errors.
C64 csPppoeSessionReceivedOctets	1.3.6.1.4.1.3085.3.1.6.17.2.1.1.11	Counter64	read-only	This object contains the number of session octets received by this PPPoE Session.
C64 csPppoeSessionReceivedPkts	1.3.6.1.4.1.3085.3.1.6.17.2.1.1.10	Counter64	read-only	This object contains the number of session packets received by this PPPoE Session.
C64 csPppoeSessionReceiveOperDown	1.3.6.1.4.1.3085.3.1.6.17.2.1.1.14	Counter64	read-only	This object contains the number of session packets received by this PPPoE Session from its peer while its operational status is down.
ROW csPppoeSessionRowStatus	1.3.6.1.4.1.3085.3.1.6.17.2.1.1.17	RowStatus	read-create	The row status for this table. Used only for deleting this session. IMPORTANT: (1) entries on this table are created when a session is established. Therefore, creation of entry thru SNMP SET Request is not allowed. (2) session is usually torn down by the peer.
STR csPppoeSessionServiceName	1.3.6.1.4.1.3085.3.1.6.17.2.1.1.5	DisplayString	read-only	This object contains the service name for which this session is established.
I32 csPppoeSessionServiceVPN	1.3.6.1.4.1.3085.3.1.6.17.2.1.1.8	Integer32	read-only	This object contains the VPN number in which this PPPoE-Session is being served.
IP csPppoeSessionServiceVR	1.3.6.1.4.1.3085.3.1.6.17.2.1.1.9	IpAddress	read-only	This object contains the VR Identifier in which this PPPoE Session is Served.
csPppoeSessionTable	1.3.6.1.4.1.3085.3.1.6.17.2.1		not-accessible	This is the list of all PPPoE sessions in a given PPPoE Access Concentrator Server.
I32 csPppoeSessionTableEnd	1.3.6.1.4.1.3085.3.1.6.17.2.2	Integer32	read-only	End of this group. value undefined
C64 csPppoeSessionTranmittedPkts	1.3.6.1.4.1.3085.3.1.6.17.2.1.1.12	Counter64	read-only	This object contains the number of session packets transmitted by this PPPoE Session.
C64 csPppoeSessionTransmitOperDown	1.3.6.1.4.1.3085.3.1.6.17.2.1.1.15	Counter64	read-only	This object contains the number of session packets received for to transmit to peer by this PPPoE Session.
C64 csPppoeSessionTransmittedOctets	1.3.6.1.4.1.3085.3.1.6.17.2.1.1.13	Counter64	read-only	This object contains the number of session octets transmitted by this PPPoE Session.
STR csPppoeSessionUserName	1.3.6.1.4.1.3085.3.1.6.17.2.1.1.1	DisplayString	read-only	This object contains the user name for this session.
csPppoeStatistics	1.3.6.1.4.1.3085.3.1.6.17.3
csPwe3ConfEntry	1.3.6.1.4.1.3085.3.1.4.2.14.1.2.1		not-accessible	This entry is indexed by the VPN and VR ID
ROW csPwe3ConfRowStatus	1.3.6.1.4.1.3085.3.1.4.2.14.1.2.1.3	RowStatus	read-create	The existence state of this table. This object follows the Row Status behaviour
csPwe3ConfTable	1.3.6.1.4.1.3085.3.1.4.2.14.1.2		not-accessible	This table is used to Configure Mpls on a Virtual Router.
I32 csPwe3EventLogArea	1.3.6.1.4.1.3085.3.1.4.2.14.1.2.1.2	Integer32	read-create	Each bit within this object enables logging for a specific area within the Pwe3 instance. Below is a list of the different areas available for logging: area bit ------------------------------------------------------ events 0 forwarding 1 end of description.
INT csPwe3EventLogLevel	1.3.6.1.4.1.3085.3.1.4.2.14.1.2.1.1	INTEGER	read-create	This object is used to set the level of details for event logs for L2oL3
INT csPwVcAdminStatus	1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.20	INTEGER	read-create	The desired operational status of this VC. It is set by the operator if csPwVcIsIf is set to false. Otherwise, it reflects the ifIndex AdminStatus.
STR csPwVcCeIntf	1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.26	DisplayString	read-create	This object is used to identify the CE interface. This format allows for many formats. We only support LI for now. The format used for this ascii-string valued object is as follows: 'B\|L VPNID\|SlotID/VRID\|PortID/VIID\|LLID:BIID' Where 'B' indicates the other end is a Bridge Interface. 'L' indicates this connection maps to a Logical Link. 'VPNID' is a Virtual Private Network ID. 'SlotID' identifies a specific slot on the Orion Box. 'VRID' is a Virtual Router ID for the VPN specified by VPNID. 'PortID' identifies a specific Port on the blade installed in the previously identified slot. 'VIID' is a Virtual Interface on the VR identified by VRID. 'LLID' is a Logical Link ID on PortID. BIID is the bridge interface ID. For example, if this connection maps to a bridge interface. (BI 3 on VI number 1 on VR 1.2.3.4 on VPN 4), this object might be set to this value: 'B 4/1.2.3.4/1:3' If this connection maps to subinterface 20 on Logical Link 100 on Port 2 of Slot 2, this object might be set to this value: 'L 2/2:100:10' If this Virtual Interface has not been mapped, this object will have the value 'DISCONNECTED'.
TIM csPwVcCreateTime	1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.14	TimeStamp	read-only	System time when this VC was created.
T/F csPwVcCtrlWord	1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.29	TruthValue	read-create	Include and except control word in the data packets.
U32 csPwVcCustomerId	1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.33	Unsigned32	read-create	Customer ID field.
STR csPwVcCustomerName	1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.34	SnmpAdminString	read-create	Customer name field.
STR csPwVcDescr	1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.13	SnmpAdminString	read-create	A textual string containing information about the VC. If there is no description this object contains a zero length string.
csPwVcEntry	1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1		not-accessible	A row in this table represents an emulated virtual connection (VC) across a packet network. It is indexed by: - The csPwVcIndex. Uniquely identifying a singular connection (or set of connections). If a set, individual VCs are identified by the Instance.
U32 csPwVcForwardPE	1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.28	Unsigned32	read-create	Processor engine number of the data forwarding processor engine. 0 means not set.
U32 csPwVcForwardSlot	1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.27	Unsigned32	read-create	Slot number of the data forwarding processor engine. 0 means not set.
PWV csPwVcID	1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.2	PwVcID	read-create	Used in the outgoing VC ID field within the 'Virtual Circuit FEC Element' when LDP signaling is used.
PWG csPwVcInboundGroupID	1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.4	PwGroupID	read-create	Obtained from the inbound Group ID field in the remote 'Virtual Circuit FEC Element' as received by control methods are used for VC setup, zero if not used or not known yet.
INT csPwVcInboundMode	1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.11	INTEGER	read-create	This object is used to enable greater security for implementation that use global VC label space. In conservative mode, inbound packets with a VC label are accepted only from tunnels that are associated to the same VC via the inbound tunnel table. The entries in the inbound tunnel table are either explicitly configured or implicitly known by the control protocol used for VC set-up. If such association is not known, not configured or not desired, liberal mode should be configured, and the node should accept the packet based on the VC label only regardless of the outer tunnel used to carry the VC.
U32 csPwVcInboundMTU	1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.5	Unsigned32	read-create	MTU of the interface at the remote PE. 0 means assume same as outbound MTU
INT csPwVcInboundOperStatus	1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.22	INTEGER	read-only	Indicates the actual operational status of this VC in the inbound direction. - down: if PW signaling has not yet finished, or indications available at the service level indicate that the VC is not passing packets. - testing: if AdminStatus at the VC level is set to test. - dormant: The VC is not available because of the required resources are occupied VC with higher priority VCs . - notPresent: Some component is missing to accomplish the set up of the VC. - lowerLayerDown: The underlying PSN is not in OperStatus 'up'.
U32 csPwVcInboundVcLabel	1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.10	Unsigned32	read-create	The VC label used in the inbound direction. It may be set up manually if owner is 'manual' or automatically otherwise. Examples: For MPLS PSN, it represents the 20 bits of VC tag, for L2TP it represent the 16 bits Session ID.
PWV csPwVcIndex	1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.1	PwVcIndex	not-accessible	Primary index for the conceptual row identifying a VC (or set of VCs) within this PW Emulation VC table.
STR csPwVcName	1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.12	SnmpAdminString	read-create	The canonical name assigned to the VC. This name can be used to refer to the VC on the node console port.
INT csPwVcOperStatus	1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.21	INTEGER	read-only	Indicates the actual combined operational status of this VC. It is 'up' if both csPwVcInboundOperStatus and csPwVcOutboundOperStatus are in 'up' state. For all other values, if the VCs in both directions are of the same value it reflects that value, otherwise it is set to 'unknown', and the operator may consult the per direction OperStatus for fault isolation.
PWG csPwVcOutboundGroupID	1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.3	PwGroupID	read-only	Used in the outbound Group ID field within the 'Virtual Circuit FEC Element' when some control methods (for example LDP) is used for VC setup, zero if not used.
INT csPwVcOutboundOperStatus	1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.23	INTEGER	read-only	Indicates the actual operational status of this VC in the outbound direction - down: if PW signaling has not yet finished, or indications available at the service level indicate that the VC is not passing packets. - testing: if AdminStatus at the VC level is set to test. - dormant: The VC is not available because of the required resources are occupied VC with higher priority VCs . - notPresent: Some component is missing to accomplish the set up of the VC. - lowerLayerDown: The underlying PSN is not in OperStatus 'up'.
U32 csPwVcOutboundVcLabel	1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.9	Unsigned32	read-create	The VC label used in the outbound direction. It may be set up manually if owner is 'manual' or automatically otherwise. Examples: For MPLS PSN, it represents the 20 bits of VC tag, for L2TP it represent the 16 bits Session ID.
INT csPwVcOwner	1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.17	INTEGER	read-create	Set by the operator to indicate the protocol responsible for establishing this VC. Value 'manual' is used in all cases where no signaling is used to set-up the VC, i.e. require configuration of all entries in the VC tables including VC labels, etc. The value 'signaling' is used in case of standard signaling of the VC for the specific PSN, for example LDP for MPLS PSN as specified in . Value 'other' is used for other types of signaling.
INT csPwVcPeerAddrType	1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.6	INTEGER	read-create	Denotes the address type of the peer node signaling address if PW signaling is used for the VC creation. It should be set to 'notApplicable' if PE/PW signaling is not used, i.e. csPwVcOwner is set to 'manual'.
IP csPwVcPeerIpv4Addr	1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.7	IpAddress	read-create	If csPwVcPeerAddrType is set to ipV4(1), then this value will contain the IPv4 address of the peer node PW/PE signaling entity. This object is otherwise insignificant and should contain a value of 0.
IP csPwVcPeerIpv6Addr	1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.8	IpAddress	read-create	If csPwVcPeerAddrType is set to ipV6(2), then this value will contain the Ipv6 address of the peer node PW/PE signaling entity. This object is otherwise insignificant and should contain a value of 0.
U32 csPwVcPriority	1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.19	Unsigned32	read-create	This object define the relative priority of the VC instance in a lowest-to-highest fashion. VC instances with the same priority are treated with equal priority (i.e. are signaled in parallel). VC instances dropped will be set 'dormant' (as indicated in csPwVcOperStatus).
INT csPwVcPsnType	1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.18	INTEGER	read-create	Set by the operator to indicate the PSN type on which this VC will be carried. Based on this object, the relevant PSN table entries are created in the in the PSN specific MIB modules. For example, if mpls(1) is defined, the agent create an entry in csPwVcMplsTable, which further define the MPLS PSN configuration.
ROW csPwVcRowStatus	1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.24	RowStatus	read-create	For creating, modifying, and deleting this row.
T/F csPwVcSeqNumber	1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.30	TruthValue	read-create	Include and check the sequence numbers.
STO csPwVcStorageType	1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.25	StorageType	read-create	This variable indicates the storage type for this object.
csPwVcTable	1.3.6.1.4.1.3085.3.1.4.2.14.1.1		not-accessible	This table specifies information for connecting various emulated services to various tunnel type.
INT csPwVcTestResult	1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.31	INTEGER	read-create	The result of the previous testing request.
INT csPwVcType	1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.16	INTEGER	read-create	This value dictates what service-specific tables are indexed by csPwVcIndex and csPwVcInstance. For example, if set for 'cem' csPwVcIndex indexes the csPwVcCemTable in [CEMMIB]. Note: CEM will also have the MSBit set in the VC type (0x8008). This is the 'Control Word' bit used within the 'Virtual Circuit FEC Element' when LDP signaling is used
TIK csPwVcUpTime	1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.15	TimeTicks	read-only	Number of consecutive ticks this VC has been 'up' in both directions together (i.e. 'up' is observed in csPwVcOperStatus.)
U32 csPwVcVlanId	1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.32	Unsigned32	read-create	The result of the previous testing request. Note: A valid VLAN ID should be provided if Connected to a BI.
csRadiusServer	1.3.6.1.4.1.3085.3.1.4.4.1
csRipConf	1.3.6.1.4.1.3085.3.1.4.2.5.2
csRipExpPolEntry	1.3.6.1.4.1.3085.3.1.4.2.5.2.4.1		not-accessible	Each entry represents a single import policy applied by the rip layer on a Virtual Router.
I32 csRipExpPolId	1.3.6.1.4.1.3085.3.1.4.2.5.2.4.1.1	Integer32	not-accessible	The Export Policy (see the corresponding entry in csExpPolTable) that is applied to this Virtual Router.
ROW csRipExpPolStatus	1.3.6.1.4.1.3085.3.1.4.2.5.2.4.1.2	RowStatus	read-create	The RowStatus object for this table. This is used to add and delete entries from this table.
csRipExpPolTable	1.3.6.1.4.1.3085.3.1.4.2.5.2.4		not-accessible	A set of Export Policies (see csExpPolTable) that are applied by rip.
INT csRipGlobalConfAgeTime	1.3.6.1.4.1.3085.3.1.4.2.5.2.1.1.2	INTEGER	read-create
csRipGlobalConfEntry	1.3.6.1.4.1.3085.3.1.4.2.5.2.1.1		not-accessible	Each entry contains a set of configuration specific to a single virtual router.
INT csRipGlobalConfJitterUpdateStatus	1.3.6.1.4.1.3085.3.1.4.2.5.2.1.1.4	INTEGER	read-create	Enable/Disable the use of the Jitter Update feature
U32 csRipGlobalConfLogAreaFlag	1.3.6.1.4.1.3085.3.1.4.2.5.2.1.1.8	Unsigned32	read-create	Each bit within this object enables loggin for a specific area within RIP. Below is a list of the different areas available for logging within RIP and their corresponding bits identifiers. area bit ------------------------------------------------------ packet 0 policy 1 end of description.
U32 csRipGlobalConfLogLevelFlag	1.3.6.1.4.1.3085.3.1.4.2.5.2.1.1.9	Unsigned32	read-create	Each bit within this object enables logging at a specific level for RIP. Below is a list of the different log levels available and their corresponding bits identifiers. area bit ------------------------------------------------------ critical 0 error 1 warning 2 information 3 debug 4 end of description.
INT csRipGlobalConfPerUpdateInt	1.3.6.1.4.1.3085.3.1.4.2.5.2.1.1.3	INTEGER	read-create
INT csRipGlobalConfReqOnStartup	1.3.6.1.4.1.3085.3.1.4.2.5.2.1.1.6	INTEGER	read-create	Enable/Disable the use of the request on startup feature.
INT csRipGlobalConfRfc1058CalcStatus	1.3.6.1.4.1.3085.3.1.4.2.5.2.1.1.5	INTEGER	read-create	Enable/Disable the use of the route metric calculation defined in rfc1058.
ROW csRipGlobalConfRowStatus	1.3.6.1.4.1.3085.3.1.4.2.5.2.1.1.7	RowStatus	read-create	The RowStatus object for this object. This is used to add/delete rows from this table. Setting it to create and go creates RIP on this Virtual Router. Setting it to destroy removes RIP from this Virtual Router.
INT csRipGlobalConfStatus	1.3.6.1.4.1.3085.3.1.4.2.5.2.1.1.1	INTEGER	read-create	Enable/Disable the use of RIP on this Virtual Router.
csRipGlobalConfTable	1.3.6.1.4.1.3085.3.1.4.2.5.2.1		not-accessible	A table of virtual router-specific configuration parameters.
C32 csRipGlobalQueries	1.3.6.1.4.1.3085.3.1.4.2.5.1.1.1.2	Counter32	read-only	The number of responses sent to RIP queries from other systems.
C32 csRipGlobalRouteChanges	1.3.6.1.4.1.3085.3.1.4.2.5.1.1.1.1	Counter32	read-only	The number of route changes made to the IP Route Database by RIP. This does not include the refresh of a route's age.
csRipGlobalStatEntry	1.3.6.1.4.1.3085.3.1.4.2.5.1.1.1		not-accessible	Each entry contains a set of statistics for a specific Virtual Router.
csRipGlobalStatTable	1.3.6.1.4.1.3085.3.1.4.2.5.1.1		not-accessible	This table contains per-VR level stats for RIP. These counters are intended to facilitate debugging quickly changing routes or failing neighbors.
STR csRipIfConfAuthPassword	1.3.6.1.4.1.3085.3.1.4.2.5.2.2.1.11	DisplayString	read-create	The password used in RIPv2 authentication. This object will return a zero length string in response to GET or GETNEXT requests.
csRipIfConfEntry	1.3.6.1.4.1.3085.3.1.4.2.5.2.2.1		not-accessible	A Single Routing Domain in a single Subnet.
INT csRipIfConfFlashUpdate	1.3.6.1.4.1.3085.3.1.4.2.5.2.2.1.9	INTEGER	read-create	Enable/Disable the Flash Update feature.
INT csRipIfConfPoisonReverse	1.3.6.1.4.1.3085.3.1.4.2.5.2.2.1.8	INTEGER	read-create	Enable/Disable the Poison Reverse feature.
INT csRipIfConfRcvDefRoute	1.3.6.1.4.1.3085.3.1.4.2.5.2.2.1.6	INTEGER	read-create	Enable/Disable the acceptance of advertised default routes.
INT csRipIfConfReceiveV1	1.3.6.1.4.1.3085.3.1.4.2.5.2.2.1.3	INTEGER	read-create	Enable/Disable the receiving of RIP V1 advertisements on this Virtual Interface.
INT csRipIfConfReceiveV2	1.3.6.1.4.1.3085.3.1.4.2.5.2.2.1.4	INTEGER	read-create	Enable/Disable the receiving of RIP V2 advertisements on this Virtual Interface.
INT csRipIfConfRipV1Compatibility	1.3.6.1.4.1.3085.3.1.4.2.5.2.2.1.10	INTEGER	read-create	Enable/Disable compatibility with RIPv1 routers.
ROW csRipIfConfRowStatus	1.3.6.1.4.1.3085.3.1.4.2.5.2.2.1.12	RowStatus	read-create	RowStatus for this object. This is used to add/delete rows from this table. Setting it to create and go creates RIP on this Virtual Interface. Setting it to destroy removes RIP from this Virtual Interface.
INT csRipIfConfSend	1.3.6.1.4.1.3085.3.1.4.2.5.2.2.1.2	INTEGER	read-create	Enable/Disable the sending of RIP advertisements on this Virtual Interface.
INT csRipIfConfSendDefRoute	1.3.6.1.4.1.3085.3.1.4.2.5.2.2.1.5	INTEGER	read-create	Enable/Disable the advertisement of default routes.
INT csRipIfConfSplitHorizon	1.3.6.1.4.1.3085.3.1.4.2.5.2.2.1.7	INTEGER	read-create	Enable/Disable the Split Horizon feature.
INT csRipIfConfStatus	1.3.6.1.4.1.3085.3.1.4.2.5.2.2.1.1	INTEGER	read-create	Enable/Disable the use of RIP on this Virtual Interface.
csRipIfConfTable	1.3.6.1.4.1.3085.3.1.4.2.5.2.2		not-accessible	A list of virtual interfaces which require separate configuration in RIP.
csRipIfStatEntry	1.3.6.1.4.1.3085.3.1.4.2.5.1.2.1		not-accessible	A Single Routing Domain in a single Subnet.
C32 csRipIfStatRcvBadPackets	1.3.6.1.4.1.3085.3.1.4.2.5.1.2.1.1	Counter32	read-only	The number of RIP response packets received by the RIP process which were subsequently discarded for any reason (e.g. a version 0 packet, or an unknown command type).
C32 csRipIfStatRcvBadRoutes	1.3.6.1.4.1.3085.3.1.4.2.5.1.2.1.2	Counter32	read-only	The number of routes, in valid RIP packets, which were ignored for any reason (e.g. unknown address family, or invalid metric).
C32 csRipIfStatSentUpdates	1.3.6.1.4.1.3085.3.1.4.2.5.1.2.1.3	Counter32	read-only	The number of triggered RIP updates actually sent on this interface. This explicitly does NOT include full updates sent containing new information.
csRipIfStatTable	1.3.6.1.4.1.3085.3.1.4.2.5.1.2		not-accessible	A list of subnets which require separate status monitoring in RIP.
I32 csRipIfStatTableEnd	1.3.6.1.4.1.3085.3.1.4.2.5.1.3	Integer32	read-only	End of this group. value undefined
csRipImpPolEntry	1.3.6.1.4.1.3085.3.1.4.2.5.2.3.1		not-accessible	Each entry represents a single import policy applied by the rip layer on a Virtual Router.
I32 csRipImpPolId	1.3.6.1.4.1.3085.3.1.4.2.5.2.3.1.1	Integer32	not-accessible	The Import Policy (see the corresponding entry in csImpPolTable) that is applied to this Virtual Router.
ROW csRipImpPolStatus	1.3.6.1.4.1.3085.3.1.4.2.5.2.3.1.2	RowStatus	read-create	The RowStatus object for this table. This is used to add and delete entries from this table.
csRipImpPolTable	1.3.6.1.4.1.3085.3.1.4.2.5.2.3		not-accessible	A set of Export Policies (see csExpPolTable) that are applied by rip.
csRipStats	1.3.6.1.4.1.3085.3.1.4.2.5.1
INT csRsvpIfAckDesired	1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.45	INTEGER	read-create	Indicates the administrator's intent as to whether acknowledgement is desired for the aggregation messages on this interface. If the administrator switches this variable on, then RSVP aggregation (csRsvpIfRRCapable) is switched ON automatically.
C32 csRsvpIfBadOtherIn	1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.36	Counter32	read-only	Number of messages received over this interface which were not valid RSVP messages.
C32 csRsvpIfBadPathErrIn	1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.32	Counter32	read-only	Number of bad Path Error messages received over this interface.
C32 csRsvpIfBadPathIn	1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.29	Counter32	read-only	Number of bad Path messages received over this interface.
C32 csRsvpIfBadPathTearIn	1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.31	Counter32	read-only	Number of bad Path Tear messages received over this interface.
C32 csRsvpIfBadResvConfIn	1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.35	Counter32	read-only	Number of bad Resv Confirm messages received over this interface.
C32 csRsvpIfBadResvErrIn	1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.34	Counter32	read-only	Number of bad Resv Error messages received over this interface.
C32 csRsvpIfBadResvIn	1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.30	Counter32	read-only	Number of bad Resv messages received over this interface.
C32 csRsvpIfBadResvTearIn	1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.33	Counter32	read-only	Number of bad Resv Tear messages received over this interface.
C32 csRsvpIfDownPsbsCreated	1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.38	Counter32	read-only	Number of Downside PSBs created so far on this interface.
C32 csRsvpIfDownRsbsCreated	1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.40	Counter32	read-only	Number of Downside RSBs created so far on this interface.
C32 csRsvpIfEgressLspsCreated	1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.42	Counter32	read-only	Number of LSPs created on this node which were terminated on this interface of this node.
T/F csRsvpIfEnabled	1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.6	TruthValue	read-create	If TRUE, RSVP is enabled on this Interface. If FALSE, RSVP is not enabled on this interface.
csRsvpIfEntry	1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1		not-accessible	An entry in this table is created for every interface running TE-RSVP.
I32 csRsvpIfHelloInterval	1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.46	Integer32	read-create	Configures the interval in seconds between Rsvp Hello messages exchanged between neighbors, on this interface.
C32 csRsvpIfIngressLspsCreated	1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.41	Counter32	read-only	Number of LSPs created on this node which were originated from this interface of this node.
IP csRsvpIfIpAddress	1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.43	IpAddress	read-create	The IP Address of this RSVP interface.
G32 csRsvpIfIpNbrs	1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.4	Gauge32	read-only	The number of neighbors perceived to be using only the RSVP IP Encapsulation.
I32 csRsvpIfMaxBandwidth	1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.1	Integer32	read-create	RSVP Reservable Bandwidth (KBPS)
I32 csRsvpIfMaxFlowBandwidth	1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.2	Integer32	read-create	Largest Reservable Flow (KBPS)
G32 csRsvpIfNbrs	1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.5	Gauge32	read-only	The number of neighbors currently perceived; this will exceed rsvpIfIpNbrs + rsvpIfUdpNbrs by the number of neighbors using both encapsulations.
C32 csRsvpIfPathErrIn	1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.18	Counter32	read-only	Number of Path Error messages received on this interface.
C32 csRsvpIfPathErrOut	1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.25	Counter32	read-only	Number of Path Error messages sent out over this interface.
C32 csRsvpIfPathIn	1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.15	Counter32	read-only	Number of PATH messages received on this interface.
C32 csRsvpIfPathOut	1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.22	Counter32	read-only	Number of Path messages sent out over this interface.
C32 csRsvpIfPathTearIn	1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.17	Counter32	read-only	Number of Path Tear messages received on this interface.
C32 csRsvpIfPathTearOut	1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.24	Counter32	read-only	Number of Path Tear messages sent out over this interface.
C32 csRsvpIfPktsIn	1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.14	Counter32	read-only	Number of RSVP Packets received in this interface.
I32 csRsvpIfQueueBandwidth	1.3.6.1.4.1.3085.3.1.4.2.10.1.5.1.2	Integer32	read-create	The maximum reservable bandwidth for MPLS.
csRsvpIfQueueEntry	1.3.6.1.4.1.3085.3.1.4.2.10.1.5.1		not-accessible	An entry in this table is created for every hardware queue on a physical VI to reserve bandwidth for MPLS.
INT csRsvpIfQueueID	1.3.6.1.4.1.3085.3.1.4.2.10.1.5.1.1	INTEGER	not-accessible	The possible queue on a physical VI
I32 csRsvpIfQueueOperBandwidth	1.3.6.1.4.1.3085.3.1.4.2.10.1.5.1.4	Integer32	read-only	Operational Bandwidth for the queue
ROW csRsvpIfQueueRowStatus	1.3.6.1.4.1.3085.3.1.4.2.10.1.5.1.3	RowStatus	read-create	A row status type for this table
csRsvpIfQueueTable	1.3.6.1.4.1.3085.3.1.4.2.10.1.5		not-accessible	This table is used to allocate MPLS bandwidth for different hardware queues on a physical VI.
I32 csRsvpIfQueueTableEnd	1.3.6.1.4.1.3085.3.1.4.2.10.1.6	Integer32	read-only	End of this group. value undefined
INT csRsvpIfRefreshBlockadeMultiple	1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.8	INTEGER	read-create	The value of the RSVP value 'Kb', Which is the minimum number of refresh intervals that blockade state will last once entered.
NUM csRsvpIfRefreshInterval	1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.11	TimeInterval	read-create	The value of the RSVP value 'R', which is the minimum period between refresh transmissions of a given PATH or RESV message on an interface.
INT csRsvpIfRefreshMultiple	1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.9	INTEGER	read-create	The value of the RSVP value 'K', which is the number of refresh intervals which must elapse (minimum) before a PATH or RESV message which is not being refreshed will be aged out.
C32 csRsvpIfResvConfIn	1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.21	Counter32	read-only	Number of RESV COnfirmation messages received on this interface.
C32 csRsvpIfResvConfOut	1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.28	Counter32	read-only	Number of Resv Confirm messages sent out over this interface.
C32 csRsvpIfResvErrIn	1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.20	Counter32	read-only	Number of RESV Error messages received on this interface.
C32 csRsvpIfResvErrOut	1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.27	Counter32	read-only	Number of Resv Error messages sent out over this interface.
C32 csRsvpIfResvIn	1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.16	Counter32	read-only	Number of RESV messages received on this interface.
C32 csRsvpIfResvOut	1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.23	Counter32	read-only	Number of Resv messages sent out over this interface.
C32 csRsvpIfResvTearIn	1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.19	Counter32	read-only	Number of Resv Tear messages received on this interface.
C32 csRsvpIfResvTearOut	1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.26	Counter32	read-only	Number of Resv Tear messages sent out over this interface.
NUM csRsvpIfRouteDelay	1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.12	TimeInterval	read-create	The approximate period from the time a route is changed to the time a resulting message appears on the interface.
INT csRsvpIfRRCapable	1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.44	INTEGER	read-create	Indicates the administrator's intent to switch on/off RSVP aggregation on the interface. Aggregation includes RSVP Refresh Reduction related messages.
ROW csRsvpIfStatus	1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.13	RowStatus	read-create	'active' on interfaces that are configured for RSVP. Corresponding row in csRsvpNbrTable must be configured and activated before the row in this table can be activated.
csRsvpIfTable	1.3.6.1.4.1.3085.3.1.4.2.10.1.2		not-accessible	This table has one row each for every interface of this LSR running TE-RSVP. Corresponding row in csRsvpNbrTable must be configured before a row in this table can be activated.
INT csRsvpIfTTL	1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.10	INTEGER	read-create	The value of SEND_TTL used on this interface for messages this node originates. If set to zero, the node determines the TTL via other means.
G32 csRsvpIfUdpNbrs	1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.3	Gauge32	read-only	The number of neighbors perceived to be using only the RSVP UDP Encapsulation.
T/F csRsvpIfUdpRequired	1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.7	TruthValue	read-create	If TRUE, manual configuration forces the use of UDP encapsulation on the interface. If FALSE, UDP encapsulation is only used if rsvpIfUdpNbrs is not zero.
C32 csRsvpIfUpPsbsCreated	1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.37	Counter32	read-only	Number of Upside PSBs created so far on this interface.
C32 csRsvpIfUpRsbsCreated	1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.39	Counter32	read-only	Number of Upside RSBs created so far on this interface.
G32 csRsvpSessionDownPsbs	1.3.6.1.4.1.3085.3.1.4.2.10.1.1.1.5	Gauge32	read-only	This object specifies the number of downside senders (Down PSBs) for this session known to this processor of this LSR.
G32 csRsvpSessionDownRsbs	1.3.6.1.4.1.3085.3.1.4.2.10.1.1.1.7	Gauge32	read-only	This object specifies the number of downside receivers (Down RSBs) for this session known to this processor of this LSR.
csRsvpSessionEntry	1.3.6.1.4.1.3085.3.1.4.2.10.1.1.1		not-accessible	An entry in this table is created by LSR for every established session. This entry is indexed by Session destination IP address Tunnel Identifier and Extended Tunnel Identifier.
U32 csRsvpSessionExtendedTunnelID	1.3.6.1.4.1.3085.3.1.4.2.10.1.1.1.3	Unsigned32	not-accessible	One of the indices for the row of the table. Specifies the Extended Tunnel identifier of the Session.
csRsvpSessionTable	1.3.6.1.4.1.3085.3.1.4.2.10.1.1		not-accessible	This table has one row for each session being managed by LSR. It provides the statistics pertaining to the session.
IP csRsvpSessionTunnelEndpoint	1.3.6.1.4.1.3085.3.1.4.2.10.1.1.1.1	IpAddress	not-accessible	One of the indices for the row of the table. Specifies the IP address (IPv4 only supported) of the destination of the Session.
INT csRsvpSessionTunnelID	1.3.6.1.4.1.3085.3.1.4.2.10.1.1.1.2	INTEGER	not-accessible	One of the indices for the row of the table. Specifies the Tunnel identifier of the Session.
G32 csRsvpSessionUpPsbs	1.3.6.1.4.1.3085.3.1.4.2.10.1.1.1.4	Gauge32	read-only	This object specifies the number of upside senders (Up PSBs) for this session known to this processor of this LSR.
G32 csRsvpSessionUpRsbs	1.3.6.1.4.1.3085.3.1.4.2.10.1.1.1.6	Gauge32	read-only	This object specifies the number of upside receivers (Up RSBs) for this session known to this processor of this LSR.
INT csRsvpVrAdminStatus	1.3.6.1.4.1.3085.3.1.4.2.10.1.3.1.1	INTEGER	read-create	Indicates the administrator's intent as to whether RSVP should be enabled or disabled on this router.
csRsvpVrConfEntry	1.3.6.1.4.1.3085.3.1.4.2.10.1.3.1		not-accessible	This entry is indexed by the VPN and VR ID
I32 csRsvpVrConfOpCode	1.3.6.1.4.1.3085.3.1.4.2.10.1.3.1.4	Integer32	read-create	Used by Rsvp Trace Commands
ROW csRsvpVrConfRowStatus	1.3.6.1.4.1.3085.3.1.4.2.10.1.3.1.5	RowStatus	read-create	A row status type for the Rsvp Table
csRsvpVrConfTable	1.3.6.1.4.1.3085.3.1.4.2.10.1.3		not-accessible	This table is used to provide RSVP related functionality at the router level
I32 csRsvpVrConfTableEnd	1.3.6.1.4.1.3085.3.1.4.2.10.1.4	Integer32	read-only	End of this group. value undefined
I32 csRsvpVrEventLogArea	1.3.6.1.4.1.3085.3.1.4.2.10.1.3.1.3	Integer32	read-create	This object is used to set the area of event logs for RSVP
I32 csRsvpVrEventLogLevel	1.3.6.1.4.1.3085.3.1.4.2.10.1.3.1.2	Integer32	read-create	This object is used to set the level of details for event logs for RSVP
csRtgPolicy	1.3.6.1.4.1.3085.3.1.4.2.1.2
I32 csRtgPolicyEnd	1.3.6.1.4.1.3085.3.1.4.2.1.2.13	Integer32	read-only	End of this group. value undefined
STR csRtPolicyName	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.1	DisplayString	not-accessible	This object identifies a specific route policy. A policy name can contain alphanumeric characters and hyphens (-).
csRtPolicyPrefixListEntry	1.3.6.1.4.1.3085.3.1.4.2.1.2.8.1		not-accessible	Each entry contains information about a single route prefix or range
INT csRtPolicyPrefixListMatchType	1.3.6.1.4.1.3085.3.1.4.2.1.2.8.1.4	INTEGER	not-accessible	The match type for this entry. exact: the route prefix should match csRtPolicyPrefixListPrefix and prefix-length should be equal to csRtPolicyPrefixListPrefixLen. longer: csRtPolicyPrefixListPrefix matches the route-prefix exactly and csRtPolicyPrefixListPrefixLen is greater than prefix-length. orlonger: csRtPolicyPrefixListPrefix matches the route-prefix exactly and csRtPolicyPrefixListPrefixLen is greater than prefix-length. upto: the most significant bits of csRtPolicyPrefixListPrefix and the route-prefix match for csRtPolicyPrefixListPrefixLen bits; the route's prefix length is between csRtPolicyPrefixListPrefixLen and csRtPolicyPrefixListPrefixLen2 (inclusive). through: the following condition should match. - prefix matches csRtPolicyPrefixListPrefix - prefix matches csRtPolicyPrefixListPrefix2 for route's prefix length bits (most significant) - prefix length is less than or equal to csRtPolicyPrefixListPrefixLen2.
STR csRtPolicyPrefixListName	1.3.6.1.4.1.3085.3.1.4.2.1.2.8.1.1	DisplayString	not-accessible	The name of the prefix-list. A name can contain alphanumeric characters and hyphens (-).
IP csRtPolicyPrefixListPrefix	1.3.6.1.4.1.3085.3.1.4.2.1.2.8.1.2	IpAddress	not-accessible	The IP prefix for this entry.
IP csRtPolicyPrefixListPrefix2	1.3.6.1.4.1.3085.3.1.4.2.1.2.8.1.5	IpAddress	not-accessible	The second prefix for this entry. This is used to specify the route range. This object is valid only if csRtPolicyPrefixListMatchType value is 'through'.
I32 csRtPolicyPrefixListPrefixLen	1.3.6.1.4.1.3085.3.1.4.2.1.2.8.1.3	Integer32	not-accessible	The prefix length for this entry.
I32 csRtPolicyPrefixListPrefixLen2	1.3.6.1.4.1.3085.3.1.4.2.1.2.8.1.6	Integer32	not-accessible	The second prefix length for this entry. This is used specify the prefix-length range. This object is valid only if csRtPolicyPrefixListMatchType value is 'upto' or 'through'.
ROW csRtPolicyPrefixListRowStatus	1.3.6.1.4.1.3085.3.1.4.2.1.2.8.1.7	RowStatus	read-create	The RowStatus object for this table. This is used to add/delete rows from this table.
csRtPolicyPrefixListTable	1.3.6.1.4.1.3085.3.1.4.2.1.2.8		not-accessible	This table holds IP prefix entries for prefix-lists. A prefix-list is a named list of IP prefixes. A prefix can be specified as an IP address and mask for exact match or can be specified as a range of IP addresses for other match conditions. Each table entry constitutes a single prefix.
I32 csRtPolicyPrefixListTableEnd	1.3.6.1.4.1.3085.3.1.4.2.1.2.9	Integer32	read-only	End of this group. value undefined
INT csRtPolicyRouteFilterActionFlow	1.3.6.1.4.1.3085.3.1.4.2.1.2.6.1.7	INTEGER	read-create	The policy flow control actions. This action is applied after all the other action objects are processed. none: use default behavior accept: accept the route. No other terms or policies are evaluated. All other action objects in this entry are processed before this action. reject: reject the route. No other terms or policies are evaluated. Other action objects are not used in combination with it. next-term: skip to and evaluate the next term in the same policy. All other action objects in this entry are processed before this action. next-policy: skip to and evaluate the first term of the next policy. All other action objects in this entry are processed before this action.
T/F csRtPolicyRouteFilterActionLogFlag	1.3.6.1.4.1.3085.3.1.4.2.1.2.6.1.8	TruthValue	read-create	Enable/disable logging this policy action.
STR csRtPolicyStrData	1.3.6.1.4.1.3085.3.1.4.2.1.2.10.1.3	DisplayString	read-create	The policy expression.
csRtPolicyStrEntry	1.3.6.1.4.1.3085.3.1.4.2.1.2.10.1		not-accessible	Each entry contains information about a single policy string fragment.
STR csRtPolicyStrName	1.3.6.1.4.1.3085.3.1.4.2.1.2.10.1.2	DisplayString	not-accessible	The name for the policy string. A name can contain alphanumeric charachers and hyphens (-). The name is unique for a given type.
ROW csRtPolicyStrRowStatus	1.3.6.1.4.1.3085.3.1.4.2.1.2.10.1.4	RowStatus	read-create	The RowStatus object for this table. This is used to add/delete rows from this table.
csRtPolicyStrTable	1.3.6.1.4.1.3085.3.1.4.2.1.2.10		not-accessible	This is a generic table to hold all the policy related string attributes. These could be lists of names, logical or regular expressions related to policy configuration. Eg: AS Path regular expressions, BGP community. The csRtPolicyStrType attribute holds the type of the policy string. Strings larger than 255 bytes are fragmented into 255 bytes segments with each fragment stored as a single table entry.
I32 csRtPolicyStrTableEnd	1.3.6.1.4.1.3085.3.1.4.2.1.2.11	Integer32	read-only	End of this group. value undefined
INT csRtPolicyStrType	1.3.6.1.4.1.3085.3.1.4.2.1.2.10.1.1	INTEGER	not-accessible	Type of policy related logical or regular expression. Regular expressions are used by AS Paths and BGP communityies. Logical expressions are used to create conditional policy statements for use by import/export policies.
STR csRtPolicyTermActionBgpASPathName	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.36	DisplayString	read-create	The AS Path to prepend. This object is a list of AS numbers. A NULL string indicates that this object is note used in this entry.
INT csRtPolicyTermActionBgpASPathOp	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.37	INTEGER	read-create	The operation to perform on the associated route attribute. none: no operation is performed, i.e., the AS path attribute is not modified. prepend: prepend the route's AS path attribute with the AS path list specified by csRtPolicyTermActionBgpASPathName.
T/F csRtPolicyTermActionBgpCommNamesListFlag	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.43	TruthValue	read-only	If the attribute is 'true' then the BGP community names list is specified as an action condition. The BGP community names list can be accessed from csRtPolicyStrTable using the the following index attributes: csRtPolicyStrType = term-action-community-names-list csRtPolicyStrName = 'csRtPolicyName/csRtPolicyTermName' csRtPolicyStrFragId =
INT csRtPolicyTermActionBgpCommOp	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.44	INTEGER	read-create	The operation to perform on the associated route attribute. none: no operation is performed, i.e., the community attribute is not modified. set: replace the route's community attribute with the communities specified by csRtPolicyTermActionBgpCommIndex. add: add the communities specified by csRtPolicyTermActionBgpCommIndex to the route's community attribute. subtract: remove the communities specified by csRtPolicyTermActionBgpCommIndex from the route's community attribute.
I32 csRtPolicyTermActionBgpLocalPref	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.45	Integer32	read-create	The BGP local preference attribute. [Check ranges and default]
INT csRtPolicyTermActionBgpLocalPrefOp	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.46	INTEGER	read-create	The operation to perform on the associated route attribute.
INT csRtPolicyTermActionBgpMetricType	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.48	INTEGER	read-create	BGP metric type to set for the route. none: this action object is not used internal: use the IGP metric.
INT csRtPolicyTermActionBgpOrigin	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.47	INTEGER	read-create	Used by BGP, the origin type as placed in the AS path by the originator of the update. The origin could be IGP (the route was learned from an internal gateway protocol), EGP (the route was learned via an exterior gateway protocol) or incomplete (the origin of the route cannot be determined). any (signal policy module to ignore this value) The value egp is deprecated.
T/F csRtPolicyTermActionFlag	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.35	TruthValue	read-only	If the attribute is 'true' then a action is specified.
INT csRtPolicyTermActionFlow	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.65	INTEGER	read-create	The policy flow control actions. This action is applied after all the other action objects are processed. none: use default behavior accept: accept the route. No other terms or policies are evaluated. All other action objects in this entry are processed before this action. reject: reject the route. No other terms or policies are evaluated. Other action objects are not used in combination with it. next-term: skip to and evaluate the next term in the same policy. All other action objects in this entry are processed before this action. next-policy: skip to and evaluate the first term of the next policy. All other action objects in this entry are processed before this action.
INT csRtPolicyTermActionIsisMetricType	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.53	INTEGER	read-create	ISIS metric type to set for the route. Value none indicates that this action object is not used.
T/F csRtPolicyTermActionLogFlag	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.66	TruthValue	read-create	Enable/disable logging this policy action.
I32 csRtPolicyTermActionMetric	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.49	Integer32	read-create	The route metric to match for this policy. The value -1 indicates this parameter has not been set.
I32 csRtPolicyTermActionMetric2	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.51	Integer32	read-create	The route metric2 to match for this policy. The value -1 indicates this parameter has not been set.
INT csRtPolicyTermActionMetric2Op	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.52	INTEGER	read-create	The operation to perform on the associated route attribute.
INT csRtPolicyTermActionMetricOp	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.50	INTEGER	read-create	The operation to perform on the associated route attribute.
IP csRtPolicyTermActionNextHopAddr	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.55	IpAddress	read-create	The nexthop address to set for the route. This attribute is valid only if the csRtPolicyTermActionNextHopAddrType is set to 'nh-address'. If value is 0.0.0.0 then this object is not set.
INT csRtPolicyTermActionNextHopAddrType	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.54	INTEGER	read-create	The next hop address type. If the value is set to 'nh-address' then the IP-address specified in csRtPolicyTermActionNextHopAddr should be used. Value none indicates that this action object is not used.
INT csRtPolicyTermActionOspfMetricType	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.56	INTEGER	read-create	OSPF Metric type to set for the route. Value none indicates that this action object is not used.
I32 csRtPolicyTermActionOspfTag	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.57	Integer32	read-create	The 32-bit tag filed in OSPF external LSA packets
I32 csRtPolicyTermActionOspfTag2	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.59	Integer32	read-create	The 32-bit tag filed in OSPF external LSA packets
INT csRtPolicyTermActionOspfTag2Op	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.60	INTEGER	read-create	The operation to perform on the associated route attribute.
INT csRtPolicyTermActionOspfTagOp	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.58	INTEGER	read-create	The operation to perform on the associated route attribute.
I32 csRtPolicyTermActionPreference	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.61	Integer32	read-create	The preference to apply to routes that match this policy. Note, this object only applies to import policies that have a 'permit' action. The value -1 indicates this parameter has not been set.
I32 csRtPolicyTermActionPreference2	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.63	Integer32	read-create	The preference to apply to routes that match this policy. Note, this object only applies to import policies that have a 'permit' action. The value -1 indicates this parameter has not been set.
INT csRtPolicyTermActionPreference2Op	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.64	INTEGER	read-create	The operation to perform on the associated route attribute.
INT csRtPolicyTermActionPreferenceOp	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.62	INTEGER	read-create	The operation to perform on the associated route attribute.
STR csRtPolicyTermActionVpnRd	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.42	DisplayString	read-create	The route distinguisher to use for a VPN route. If this attribute is set then this attribute is a string of upto 32 bytes absolute value or in regular expression format otherwise it is of zero length.
T/F csRtPolicyTermActionVpnRouteTargetNamesListFlag	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.38	TruthValue	read-only	If the attribute is 'true' then the VPN Route Target names list is specified as an action condition. The VPN Route Target names list can be accessed from csRtPolicyStrTable using the following index attributes: csRtPolicyStrType = term-action-vpn-route-target-names-list csRtPolicyStrName = 'csRtPolicyName/csRtPolicyTermName' csRtPolicyStrFragId =
INT csRtPolicyTermActionVpnRouteTargetOp	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.39	INTEGER	read-create	The operation to perform on the associated route attribute. none: no operation is performed, i.e., the route target is not modified. set: replace the route's route target with the members of route targets list specified add: add the route's route target with the members of route targets list specified subtract: remove the members of route targets list specified from route's route target
STR csRtPolicyTermActionVpnSoo	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.41	DisplayString	read-create	The site of origin to use for a VPN route. If this attribute is set then this attribute is a string of upto 32 bytes absolute value or in regular expression format otherwise it is of zero length.
INT csRtPolicyTermActionVpnSooOp	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.40	INTEGER	read-create	The operation to perform on the associated route attribute. none: no operation is performed, i.e., the site of origin is not modified. set: replace the route's site of origin with the site of origin value specified in action. delete: delete the route's site of origin
csRtPolicyTermEntry	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1		not-accessible	Each entry contains information about a single policy term. The policy name along with the term name identifies an entry.
STR csRtPolicyTermFromBgpASPathName	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.4	DisplayString	read-create	The identifier for a BGP AS path regular expression. It is used to locate an AS path entry in csRtPolicyExpTable. A NULL string indicates that this object is note used in this table entry.
T/F csRtPolicyTermFromBgpCommNamesListFlag	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.8	TruthValue	read-only	If the attribute is 'true' then the BGP community names list is specified specified as a match condition. The BGP community names list can be accessed from csRtPolicyStrTable using the the following index attributes: csRtPolicyStrType = term-from-community-names-list csRtPolicyStrName = 'csRtPolicyName/csRtPolicyTermName'
I32 csRtPolicyTermFromBgpLocalPref	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.9	Integer32	read-create	The BGP local preference attribute. [Check ranges and default]
INT csRtPolicyTermFromBgpOrigin	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.10	INTEGER	read-create	Used by BGP, the origin type as placed in the AS path by the originator of the update. The origin could be IGP (the route was learned from an internal gateway protocol), EGP (the route was learned via an exterior gateway protocol) or incomplete (the origin of the route cannot be determined). none (signal policy module to ignore this value) The value egp is deprecated.
IP csRtPolicyTermFromIntfAddr	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.12	IpAddress	read-create	The IP address of the interface from which this route was learnt. This condition should not be used for protocols which are not interface specific, eg. IBGP. The value 0.0.0.0 represents that this attribute is not used.
I32 csRtPolicyTermFromIntfIndex	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.11	Integer32	read-create	The index of the interface from which this route was learnt. This condition should not be used for protocols which are not interface specific, eg. IBGP. The value -1 indicates that this attribute is not used.
INT csRtPolicyTermFromIsisLevel	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.13	INTEGER	read-create	ISIS level of the route.
INT csRtPolicyTermFromIsisMetricType	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.14	INTEGER	read-create	ISIS Metric type to match for the policy.
I32 csRtPolicyTermFromMetric1	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.15	Integer32	read-create	The route metric to match for this policy. The value -1 indicates this parameter has not been set.
I32 csRtPolicyTermFromMetric2	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.16	Integer32	read-create	The route metric2 to match for this policy. The value -1 indicates this parameter has not been set.
IP csRtPolicyTermFromNbrAddr	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.17	IpAddress	read-create	The value 0.0.0.0 represents that this attribute is not used.
STR csRtPolicyTermFromNbrGroupName	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.18	DisplayString	read-create	The Name of the BGP Neighbor Group
IP csRtPolicyTermFromNextHopAddrIndex	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.19	IpAddress	read-create	The value 0.0.0.0 represents a wildcard for this parameter.
IP csRtPolicyTermFromOspfArea	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.20	IpAddress	read-create	The OSPF area identifier.
INT csRtPolicyTermFromOspfAreaType	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.21	INTEGER	read-create	OSPF area type to match for the policy.
INT csRtPolicyTermFromOspfMetricType	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.22	INTEGER	read-create	OSPF metric type to match for the policy.
I32 csRtPolicyTermFromOspfTag1	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.23	Integer32	read-create	The 32-bit tag filed in OSPF external LSA packets
I32 csRtPolicyTermFromOspfTag2	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.24	Integer32	read-create	The 32-bit tag filed in OSPF external LSA packets
T/F csRtPolicyTermFromPolicyNamesListFlag	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.25	TruthValue	read-only	If the attribute is 'true' then a list of policy names is specified as a match condition. Each name in the list represents a route policy. The policy names list can be accessed from csRtPolicyStrTable using the the following index attributes: csRtPolicyStrType = term-from-policy-names-list csRtPolicyStrName = 'csRtPolicyName/csRtPolicyTermName' csRtPolicyStrFragId =
I32 csRtPolicyTermFromPreference1	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.26	Integer32	read-create	The preference to apply to routes that match this policy. Note, this object only applies to import policies that have a 'permit' action. The value -1 indicates this parameter has not been set.
I32 csRtPolicyTermFromPreference2	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.27	Integer32	read-create	The preference to apply to routes that match this policy. Note, this object only applies to import policies that have a 'permit' action. The value -1 indicates this parameter has not been set.
T/F csRtPolicyTermFromPrefixNamesListFlag	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.28	TruthValue	read-only	If the attribute is 'true' then a list of prefix-list names is specified as a match condition. Each name in the list represents a prefix-list. The prefix names list can be accessed from csRtPolicyStrTable using the the following index attributes: csRtPolicyStrType = term-from-prefix-names-list csRtPolicyStrName = 'csRtPolicyName/csRtPolicyTermName' csRtPolicyStrFragId =
U32 csRtPolicyTermFromProtocol	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.30	Unsigned32	read-create	The protocol that has added the route to the routing table. Each bit within this object specifies protocol added the route. Below is a list of the protocols and their corresponding bits identifiers. options bit -------------------------------------- none 0 local 1 bgp 2 rip 4 ospf 8 static 16 isis 32 aggregate 64 vpn 128 dial-ppp 256 dial-ipsec 512 End of description.
T/F csRtPolicyTermFromRouteFilterFlag	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.29	TruthValue	read-only	If the attribute is 'true' then a list of route-filters are specified as a match condition.
STR csRtPolicyTermFromVpnRd	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.7	DisplayString	read-create	A list of route distinguisher values to match the RD of a VPN route. If this attribute is set then this attribute is a string of upto 32 bytes Value is absolute value or in regular expression format. If this attribute is not set then it is of zero length.
T/F csRtPolicyTermFromVpnRouteTargetNamesListFlag	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.5	TruthValue	read-only	If the attribute is 'true' then the VPN Route Target names list is specified as a match condition. The VPN Route Target names list can be accessed from csRtPolicyStrTable using the the following index attributes: csRtPolicyStrType = term-from-vpn-route-target-names-list csRtPolicyStrName = 'csRtPolicyName/csRtPolicyTermName'
STR csRtPolicyTermFromVpnSoo	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.6	DisplayString	read-create	A site-of-origin value to match the SOO of a VPN route. If this attribute is set then this attribute is a string of upto 32 bytes Value is absolute value or in regular expression format. If this attribute is not set then it is of zero length.
STR csRtPolicyTermName	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.2	DisplayString	not-accessible	This object along with the csRtPolicyName identifies a unique policy term table entry. A csRtPolicyAction table entry is also associated with a policy term. A policy term name can contain alphanumeric characters and hyphens (-).
ROW csRtPolicyTermRowStatus	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.67	RowStatus	read-create	The RowStatus object for this table. This is used to add/delete rows from this table.
I32 csRtPolicyTermSeqNum	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.3	Integer32	read-create	The sequence number of this policy term. Policy terms are evaluated in the ascending order of thier sequence numbers. If more than one term has the same sequence number then the order of their evaluation relative to each other may be abribtrary.
csRtPolicyTermTable	1.3.6.1.4.1.3085.3.1.4.2.1.2.4		not-accessible	This table is used to configure route policies. Each route policy is referred by a name 'csRtPolicyName'. A route policy consists of multiple named terms which are referred by 'csRtPolicyTermName'. A route term constitues a set of match conditions, modifiers (set attributes) and a flow action for the policy execution.
I32 csRtPolicyTermTableEnd	1.3.6.1.4.1.3085.3.1.4.2.1.2.5	Integer32	read-only	End of this group. value undefined
INT csRtPolicyTermToIsisLevel	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.31	INTEGER	read-create	ISIS level for the routing instance. This attribute is used in policies to redistribute routes into ISIS.
IP csRtPolicyTermToNbrAddr	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.33	IpAddress	read-create	The value 0.0.0.0 represents a wildcard for this parameter.
STR csRtPolicyTermToNbrGroupName	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.34	DisplayString	read-create	The Name of the BGP Neighbor Group
INT csRtPolicyTermToOspfAreaType	1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.32	INTEGER	read-create	OSPF area type for the policy.
csRtPolicyUserEntry	1.3.6.1.4.1.3085.3.1.4.2.1.2.12.1		not-accessible	Each entry contains information about a single policy usage configuration. It represents an import-policy or export-policy statement for a ptotocol.
STR csRtPolicyUserIndexValue	1.3.6.1.4.1.3085.3.1.4.2.1.2.12.1.2	DisplayString	not-accessible	The value field is specific to each protocol user. Most protocols will be using this field. The encoding of this attruibute for protocols using it is specified below. It should be specified as defined below for the following csRtPolicyUserType values: RIP : not used OSPF : not used ISIS : not used BGP-PEER: 7-15 char ipaddress dotted-decimal string (BGPNbrAddress) BGP-GROUP: 1-32 byte peer-group name (BGPGroupName) VPN-VRF: not used VPN-VRM: not used
STR csRtPolicyUserPolicyString	1.3.6.1.4.1.3085.3.1.4.2.1.2.12.1.4	DisplayString	read-create	The list of policy names. Policies are evaluated in the order of thier apperiance in the list. This string could be a logical expression of polices if supported.
INT csRtPolicyUserPolicyType	1.3.6.1.4.1.3085.3.1.4.2.1.2.12.1.3	INTEGER	read-create	The type of policy: import: import route policy export: export route policy vpn-access: Access policy used by a bGP-peer when a Customer VR requests a join operation.
ROW csRtPolicyUserRowStatus	1.3.6.1.4.1.3085.3.1.4.2.1.2.12.1.5	RowStatus	read-create	The RowStatus object for this table. This is used to add & remove rows from this table.
csRtPolicyUserTable	1.3.6.1.4.1.3085.3.1.4.2.1.2.12		not-accessible	This table hold routing policy usage configuration for all protocols/components in the router. It is normally the import-policy/export-policy configuration statements in a protocol context. The index is specified as a {Type,Value} to account for the differences between protocols. For example, if protocol type is BGP then the index identifies also identifies the BGP peer or group for which the configuration is applicable.
INT csRtPolicyUserType	1.3.6.1.4.1.3085.3.1.4.2.1.2.12.1.1	INTEGER	read-create	The route policy user type. It is the protocol configuration element using the import/export policy.
csTeLdpObjects	1.3.6.1.4.1.3085.3.1.4.2.10.3
csTelnetConnEntry	1.3.6.1.4.1.3085.3.1.11.2.1		not-accessible	Each entry lists one currently active telnet connection.
I32 csTelnetConnId	1.3.6.1.4.1.3085.3.1.11.2.1.1	Integer32	not-accessible	Connection Id of this particular telnet session.
IP csTelnetConnIpAddr	1.3.6.1.4.1.3085.3.1.11.2.1.2	IpAddress	read-create	The remote peer's ip address of this telnet session.
I32 csTelnetConnPort	1.3.6.1.4.1.3085.3.1.11.2.1.3	Integer32	read-create	The remote peer's port number of this telnet session.
ROW csTelnetConnRowStatus	1.3.6.1.4.1.3085.3.1.11.2.1.4	RowStatus	read-create	The admin status type for this entry in the connection table.
csTelnetConnTable	1.3.6.1.4.1.3085.3.1.11.2		not-accessible	Table lists all the currently active telnet connection.
INT csTelnetSvrConfAdminStatus	1.3.6.1.4.1.3085.3.1.11.1.1.1	INTEGER	read-write	Enable/Disable the use of telnet server.
csTelnetSvrConfEntry	1.3.6.1.4.1.3085.3.1.11.1.1		not-accessible	Each entry contains a set of configuration paramters for telnet server in a VR. Note, that only a single instance of telnet server is enabledat a time.
I32 csTelnetSvrConfNumOfSessions	1.3.6.1.4.1.3085.3.1.11.1.1.3	Integer32	read-write	User configurable number of simultaneous client sessions supported.
csTelnetSvrConfTable	1.3.6.1.4.1.3085.3.1.11.1		not-accessible	A table of telnet server configuration parameters.
I32 csTelnetSvrConfTimeout	1.3.6.1.4.1.3085.3.1.11.1.1.2	Integer32	read-write	A user configurable telnet timeout value in minutes.
csTelnetSvrInfo	1.3.6.1.4.1.3085.3.1.11
csTeMplsObjects	1.3.6.1.4.1.3085.3.1.4.2.10.2
csTeRsvpObjects	1.3.6.1.4.1.3085.3.1.4.2.10.1
INT csUnchanDs3ConfigAdminStatus	1.3.6.1.4.1.3085.3.1.3.2.10.1.16	INTEGER	read-write	This object is used to enable/disable this Ds3/E3 port.
I32 csUnchanDs3ConfigCableLength	1.3.6.1.4.1.3085.3.1.3.2.10.1.4	Integer32	read-write	The length of the DS3 cable.
INT csUnchanDs3ConfigClockSource	1.3.6.1.4.1.3085.3.1.3.2.10.1.18	INTEGER	read-write	This object specifies the source of the Transmit Clock used on this (unchannelized) DS3. If this object is set to internal(1), a local clock source is used. If this object is set to line(2), the recovered received clock is used as the transmit clock. NOTE: This is applicable only for DS3.
INT csUnchanDs3ConfigDeviceType	1.3.6.1.4.1.3085.3.1.3.2.10.1.27	INTEGER	read-only	This object indicates whether the interface is DS3 or E3.
INT csUnchanDs3ConfigEncap	1.3.6.1.4.1.3085.3.1.3.2.10.1.19	INTEGER	read-write	This object specifies the encapsulation used on this DS3/E3 port. If the encapsulation type is frameRelay(2), use the csFrameRelayTable to configure the Frame Relay specific parameters.
csUnchanDs3ConfigEntry	1.3.6.1.4.1.3085.3.1.3.2.10.1		not-accessible	An entry in the Unchannelized DS3 Configuration table.
INT csUnchanDs3ConfigFraming	1.3.6.1.4.1.3085.3.1.3.2.10.1.5	INTEGER	read-write	The framing format used on this Ds3 Interface. The default value is cbit if the interface is DS3. If the interface is E3, e3Framed will be used, and cannot be configured to any other types.
INT csUnchanDs3ConfigInvalidInterval	1.3.6.1.4.1.3085.3.1.3.2.10.1.26	INTEGER	read-only	The number of intervals in the range from 0 to csDs3ConfigValidInterval for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).
INT csUnchanDs3ConfigLineStatus	1.3.6.1.4.1.3085.3.1.3.2.10.1.23	INTEGER	read-only	This variable indicates the Line Status of the interface. It contains loopback state information and failure state information. The csUnchanDs3ConfigLineStatus is a bit map represented as a sum, therefore, it can represent multiple failures and a loopback (see csUnchanDs3ConfigLoopbackStatus object for the type of loopback) simultaneously. The ds3NoAlarm must be set if and only if no other flag is set. If the ds3LoopbackState bit is set, the loopback in effect can be determined from the csUnchanDs3ConfigLoopbackStatus object. The various bit positions are: 0 ds3NoAlarm No alarm present 1 ds3RcvRAIFailure Receiving Yellow/Remote Alarm Indication 2 ds3XmitRAIAlarm Transmitting Yellow/Remote Alarm Indication 3 ds3RcvAIS Receiving AIS failure state 4 ds3XmitAIS Transmitting AIS 5 ds3LOF Receiving LOF failure state 6 ds3LOS Receiving LOS failure state 7 ds3LoopbackState Looping the received signal 8 ds3RcvTestCode Receiving a Test Pattern 9 ds3OtherFailure any line status not defined here 10 ds3UnavailSigState Near End in Unavailable Signal State 11 ds3NetEquipOOS Carrier Equipment Out of Service
INT csUnchanDs3ConfigLoopbackStatus	1.3.6.1.4.1.3085.3.1.3.2.10.1.22	INTEGER	read-only	This variable represents the current state of the loopback on the DS3 interface. It contains information about loopbacks established by a manager and remotely from the far end. The csUnchanDs3ConfigLoopbackStatus is a bit map represented as a sum, therefore is can represent multiple loopbacks simultaneously. The various bit positions are: 1 ds3NoLoopback 2 ds3NearEndPayloadLoopback 4 ds3NearEndLineLoopback 8 ds3NearEndOtherLoopback 16 ds3NearEndInwardLoopback 32 ds3FarEndPayloadLoopback 64 ds3FarEndLineLoopback
INT csUnchanDs3ConfigLoopbackType	1.3.6.1.4.1.3085.3.1.3.2.10.1.21	INTEGER	read-write	This object represents the desired loopback configuration of the DS3 interface. The values mean: noLoop Not in the loopback state. A device that is not capable of performing a loopback on the interface shall always return this as its value. lineLoop The received signal at this interface does not go through the device (minimum penetration) but is looped back out. otherLoop Loopbacks that are not defined here. Currently not used in the IPSX system. inwardLoop The sent signal at this interface is looped back through the device. dualLoop Both lineLoop and inwardLoop will be active simultaneously.
STR csUnchanDs3ConfigMdlEic	1.3.6.1.4.1.3085.3.1.3.2.10.1.9	DisplayString	read-write	This object specifies the Equipment Identification Code. NOTE: This is applicable only for DS3.
STR csUnchanDs3ConfigMdlFic	1.3.6.1.4.1.3085.3.1.3.2.10.1.11	DisplayString	read-write	This object specifies the Frame Identification Code. NOTE: This is applicable only for DS3.
STR csUnchanDs3ConfigMdlGenerator	1.3.6.1.4.1.3085.3.1.3.2.10.1.15	DisplayString	read-write	This object specifies the Generator number string sent in the MDL Test Signal message. NOTE: This is applicable only for DS3.
INT csUnchanDs3ConfigMdlIdleSig	1.3.6.1.4.1.3085.3.1.3.2.10.1.7	INTEGER	read-write	This object controls the transmission of the MDL Idle Signal message. NOTE: This is applicable only for DS3.
STR csUnchanDs3ConfigMdlLic	1.3.6.1.4.1.3085.3.1.3.2.10.1.10	DisplayString	read-write	This object specifies the Location Identification Code. NOTE: This is applicable only for DS3.
INT csUnchanDs3ConfigMdlPath	1.3.6.1.4.1.3085.3.1.3.2.10.1.6	INTEGER	read-write	This object controls the transmission of the MDL Path message. NOTE: This is applicable only for DS3.
STR csUnchanDs3ConfigMdlPfi	1.3.6.1.4.1.3085.3.1.3.2.10.1.13	DisplayString	read-write	This object specifies the Facility Identification Code sent in the MDL Path message. NOTE: This is applicable only for DS3.
STR csUnchanDs3ConfigMdlPort	1.3.6.1.4.1.3085.3.1.3.2.10.1.14	DisplayString	read-write	This object specifies the Port number string sent in the MDL Idle Signal message. NOTE: This is applicable only for DS3.
INT csUnchanDs3ConfigMdlTestSig	1.3.6.1.4.1.3085.3.1.3.2.10.1.8	INTEGER	read-write	This object controls the transmission of the MDL Test Signal message. NOTE: This is applicable only for DS3.
STR csUnchanDs3ConfigMdlUnit	1.3.6.1.4.1.3085.3.1.3.2.10.1.12	DisplayString	read-write	This object specifies the Unit Identification Code. NOTE: This is applicable only for DS3.
I32 csUnchanDs3ConfigModuleIndex	1.3.6.1.4.1.3085.3.1.3.2.10.1.2	Integer32	not-accessible	This object identifies the module on the Unchannelized Ds3 Blade.
OPE csUnchanDs3ConfigOperStatus	1.3.6.1.4.1.3085.3.1.3.2.10.1.17	OperStatus	read-only	This object indicates the current operational status of this Ds3/E3 port.
I32 csUnchanDs3ConfigPortIndex	1.3.6.1.4.1.3085.3.1.3.2.10.1.3	Integer32	not-accessible	This object identifies the location of the Unchannelized Ds3 Port on the blade identified by csUnchanDs3SlotIndex. Together with csUnchanDs3ConfigSlotIndex, it uniquely identifies a physical port.
INT csUnchanDs3ConfigSendCode	1.3.6.1.4.1.3085.3.1.3.2.10.1.20	INTEGER	read-write	This variable indicates what type of code is being sent across the DS3 interface by the device. Setting this variable causes the interface to begin sending the code requested. NOTE: This is applicable only for DS3. The values mean: sendNoCode sending looped or normal data sendLineCode sending a request for a line loopback sendResetCode sending a loopback deactivation request
I32 csUnchanDs3ConfigSlotIndex	1.3.6.1.4.1.3085.3.1.3.2.10.1.1	Integer32	not-accessible	This object identifies the blade to which this Unchannelized Ds3 Port is attached. Together with csUnchanDs3ConfigPortIndex, it uniquely identifies a physical port.
csUnchanDs3ConfigTable	1.3.6.1.4.1.3085.3.1.3.2.10		not-accessible	The Unchannelized DS3 configuration table.
INT csUnchanDs3ConfigTimeElapsed	1.3.6.1.4.1.3085.3.1.3.2.10.1.24	INTEGER	read-only	The number of seconds that have elapsed since the beginning of the near end current error-measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.
INT csUnchanDs3ConfigValidInterval	1.3.6.1.4.1.3085.3.1.3.2.10.1.25	INTEGER	read-only	The number of previous near end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15 minute near end intervals since the interface has been online. In the case where the agent is a proxy, it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.
INT csVpnVrfAdminStatus	1.3.6.1.4.1.3085.3.1.4.2.11.1.1.1.5	INTEGER	read-create	The enable/disable status of this VPN customer instance.
I32 csVpnVrfAllowASIn	1.3.6.1.4.1.3085.3.1.4.2.11.1.1.1.11	Integer32	read-create	To allow duplicate AS numbers for the BGP VPN routes received by this VRF. This attribute specifies the number of duplicates which are permitted. By default duplocate ASNs are not permitted. This attribute is used only if the VR is configured with an ASN, i.e., BGP is enabled.
T/F csVpnVrfASOverride	1.3.6.1.4.1.3085.3.1.4.2.11.1.1.1.12	TruthValue	read-create	To allow the VPN service provider VR to override a VRF's ASN with the provders ASN. This option is normally used along with the site-of-origin option.
STR csVpnVrfDescription	1.3.6.1.4.1.3085.3.1.4.2.11.1.1.1.2	DisplayString	read-create	The description for this instance.
csVpnVrfEntry	1.3.6.1.4.1.3085.3.1.4.2.11.1.1.1		not-accessible	Each entry contains information about a single RFC2547 BGP/MPLS VPN routing instance.
U32 csVpnVrfLogAreaFlag	1.3.6.1.4.1.3085.3.1.4.2.11.1.1.1.6	Unsigned32	read-create	Each bit within this object enables logging for a specific area within the VPN routing instance. Below is a list of the different areas available for logging: area bit ------------------------------------------------------ system 0 routes-receive 1 routes-send 2 vpn-sp (control interface to VPN-SP) 3 end of description.
INT csVpnVrfLogLevelFlag	1.3.6.1.4.1.3085.3.1.4.2.11.1.1.1.7	INTEGER	read-create	This object enables logging at a specific level.
I32 csVpnVrfMaxRoutes	1.3.6.1.4.1.3085.3.1.4.2.11.1.1.1.13	Integer32	read-create	The maximum number of routes the VRF instance is allowed to add to the RIB. A value of -1 indicates that this attribute is not set, i.e., no maximum is configured.
INT csVpnVrfMaxRoutesExceedAction	1.3.6.1.4.1.3085.3.1.4.2.11.1.1.1.14	INTEGER	read-create	The action to take if the number of routes exceed the csVpnVrfMaxRoutes configured for this VRF. discard: Routes are rejected with an error mesaage warning-message: Routes are accepted but a warning message is displayed.
STR csVpnVrfName	1.3.6.1.4.1.3085.3.1.4.2.11.1.1.1.1	DisplayString	read-create	The name for this VPN instance. It can contain alphanumic characters and hiphens (-).
I32 csVpnVrfPreference	1.3.6.1.4.1.3085.3.1.4.2.11.1.1.1.8	Integer32	read-create	This default preference value for routes added by the instance to the RIB. A value of -1 indicates that this attribute is not configured.
STR csVpnVrfProviderName	1.3.6.1.4.1.3085.3.1.4.2.11.1.1.1.3	DisplayString	read-create	The name of the VPN Service Provider VR for this instance. Multiple Service Provider names can be specified by separating them using spaces. The VRF instance will select to use one of these providers. If the selected provider connectivity not active then the VRF instance will select another provider from its list. A VRF peers with only one provider at any time.
OCT csVpnVrfRouteDistinguisher	1.3.6.1.4.1.3085.3.1.4.2.11.1.1.1.4	OCTET STRING	read-create	The route distinguisher for this VPN customer instance.
csVpnVrfRouteTargetEntry	1.3.6.1.4.1.3085.3.1.4.2.11.1.2.1		not-accessible	Each entry contains information about a single route target. It is an 8-byte value. Also, each entry indicates if it is an import or export route target
ROW csVpnVrfRouteTargetRowStatus	1.3.6.1.4.1.3085.3.1.4.2.11.1.2.1.3	RowStatus	read-create	The variable is used to create, modify or delete a row in this table.
csVpnVrfRouteTargetTable	1.3.6.1.4.1.3085.3.1.4.2.11.1.2		not-accessible	This table is used to configure import/export route targets for RFC2547 VPN routing instances (VRFs).
INT csVpnVrfRouteTargetType	1.3.6.1.4.1.3085.3.1.4.2.11.1.2.1.1	INTEGER	not-accessible	The type of Route Target entry.
OCT csVpnVrfRouteTargetValue	1.3.6.1.4.1.3085.3.1.4.2.11.1.2.1.2	OCTET STRING	not-accessible	The route target value. It is an extended community encoded as an 8-byte value. An extended community is specified either as : or as :.
ROW csVpnVrfRowStatus	1.3.6.1.4.1.3085.3.1.4.2.11.1.1.1.9	RowStatus	read-create	The variable is used to create, modify or delete a row in this table.
OCT csVpnVrfSiteOfOrigin	1.3.6.1.4.1.3085.3.1.4.2.11.1.1.1.10	OCTET STRING	read-create	The site-f-origin extended community attribute for this VPN customer instance.
csVpnVrfTable	1.3.6.1.4.1.3085.3.1.4.2.11.1.1		not-accessible	This table is used to configure RFC2547 VPN routing instances. Each instance represent the partication of this router as a VRF in an BGP/MPLS VPN provider edge (PE). A router can suppport multiple VPN routing instances to allow peering with with multiple VPN providers.

RFC description

Manages Cosine Orion router network functions including BGP, MPLS, IGMP, and virtual private networks.

Start monitoring CoSine Communications IPNOS blade-based service platform with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download COSINE-ORION-MIB

What Is COSINE-ORION-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description