COSINE-ORION-MIB :: csUnchanDs3ConfigMdlTestSig

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCOSINE-ORION-MIBcsUnchanDs3ConfigMdlTestSig

csUnchanDs3ConfigMdlTestSig

Module: COSINE-ORION-MIB

OID (symbolic): COSINE-ORION-MIB::csUnchanDs3ConfigMdlTestSig

OID (numeric): 1.3.6.1.4.1.3085.3.1.3.2.10.1.8

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object controls the transmission of the MDL Test Signal message. NOTE: This is applicable only for DS3.

What is csUnchanDs3ConfigMdlTestSig?

csUnchanDs3ConfigMdlTestSig is a read-write enable/disable switch controlling whether this DS3 port transmits the MDL Test Signal message, another C-bit maintenance message restricted to DS3 interfaces. This message announces that the port is running a loopback or test pattern, stopping downstream monitoring systems from flagging that legitimate test traffic as a service outage. For example, while a technician runs a bit-error-rate test on the DS3 loop, enabling csUnchanDs3ConfigMdlTestSig warns the far-end carrier's systems that the unusual traffic pattern is an authorized test, not a fault.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3085.3.1.3.2.10.1.8
snmpwalk -v2c -c public <target> COSINE-ORION-MIB::csUnchanDs3ConfigMdlTestSig

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3085.3.1.3.2.10.1.8.1
snmpget -v2c -c public <target> COSINE-ORION-MIB::csUnchanDs3ConfigMdlTestSig.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.3085.3.1.3.2.10.1.8.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> csUnchanDs3ConfigMdlTestSig.1

Start monitoring CoSine Communications IPNOS blade-based service platform with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the COSINE-ORION-MIB::csUnchanDs3ConfigMdlTestSig OID value, configure state conditions and alerts, and monitor any CoSine Communications IPNOS blade-based service platform from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.3085csRootCOSINE-GLOBAL-REG
1.3.6.1.4.1.3085.3csProductCOSINE-GLOBAL-REG
1.3.6.1.4.1.3085.3.1csOrionMIBCOSINE-GLOBAL-REG
Numeric OIDNameModule
1.3.6.1.4.1.3085.3.1.3csOrionPortInfoCOSINE-ORION-MIB
1.3.6.1.4.1.3085.3.1.3.2csOrionDs3InfoCOSINE-ORION-MIB
1.3.6.1.4.1.3085.3.1.3.2.10csUnchanDs3ConfigTableCOSINE-ORION-MIB
1.3.6.1.4.1.3085.3.1.3.2.10.1csUnchanDs3ConfigEntryCOSINE-ORION-MIB
1.3.6.1.4.1.3085.3.1.3.2.10.1.8csUnchanDs3ConfigMdlTestSigCOSINE-ORION-MIB