COSINE-ORION-MIB :: csOrionIpSecStatsEspCryptoCepEstablishOk

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCOSINE-ORION-MIBcsOrionIpSecStatsEspCryptoCepEstablishOk

csOrionIpSecStatsEspCryptoCepEstablishOk

Module: COSINE-ORION-MIB

OID (symbolic): COSINE-ORION-MIB::csOrionIpSecStatsEspCryptoCepEstablishOk

OID (numeric): 1.3.6.1.4.1.3085.3.1.6.5.9.1.20

Node type: OBJECT-TYPE

Type: Counter32

Access: read-only

Description: The number of crypto ceps that are ESP encrypted sucessfully established in this Virtual Interface.

What is csOrionIpSecStatsEspCryptoCepEstablishOk?

This Counter32 counts the number of crypto CEPs (crypto engine connection endpoints) that are ESP-encrypted and successfully established in this Virtual Interface, per its description. An admin reads this as a hardware/crypto-engine-level health signal distinct from the SA counters above; a growing 'successfully established' count for failures indicates the crypto acceleration path itself is struggling to set up sessions, not just the IKE negotiation. For example, an admin seeing ESP CEP failures climb on VI 3 terminating a partner site-to-site tunnel while IKE negotiations report success would suspect a hardware crypto resource exhaustion issue rather than a configuration mismatch.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3085.3.1.6.5.9.1.20
snmpwalk -v2c -c public <target> COSINE-ORION-MIB::csOrionIpSecStatsEspCryptoCepEstablishOk

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3085.3.1.6.5.9.1.20.1
snmpget -v2c -c public <target> COSINE-ORION-MIB::csOrionIpSecStatsEspCryptoCepEstablishOk.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> csOrionIpSecStatsEspCryptoCepEstablishOk.1

Start monitoring CoSine Communications IPNOS blade-based service platform with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the COSINE-ORION-MIB::csOrionIpSecStatsEspCryptoCepEstablishOk OID value, configure state conditions and alerts, and monitor any CoSine Communications IPNOS blade-based service platform from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.3085csRootCOSINE-GLOBAL-REG
1.3.6.1.4.1.3085.3csProductCOSINE-GLOBAL-REG
1.3.6.1.4.1.3085.3.1csOrionMIBCOSINE-GLOBAL-REG
Numeric OIDNameModule
1.3.6.1.4.1.3085.3.1.6csOrionServiceInfoCOSINE-ORION-MIB
1.3.6.1.4.1.3085.3.1.6.5csOrionEncryptInfoCOSINE-ORION-MIB
1.3.6.1.4.1.3085.3.1.6.5.9csOrionIpSecStatsTableCOSINE-ORION-MIB
1.3.6.1.4.1.3085.3.1.6.5.9.1csOrionIpSecStatsEntryCOSINE-ORION-MIB
1.3.6.1.4.1.3085.3.1.6.5.9.1.20csOrionIpSecStatsEspCryptoCepEstablishOkCOSINE-ORION-MIB