All MIBs › COSINE-ORION-MIB › csDs3ConfigSendCode
csDs3ConfigSendCode
Module: COSINE-ORION-MIB
OID (symbolic): COSINE-ORION-MIB::csDs3ConfigSendCode
OID (numeric): 1.3.6.1.4.1.3085.3.1.3.2.1.1.21
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This variable indicates what type of code is being sent across the DS3 interface by the device. Setting this variable causes the interface to begin sending the code requested. The values mean:
sendNoCode sending looped or normal data
sendLineCode sending a request for a line loopback
sendPayloadCode sending a request for a payload loopback (i.e., all DS1/E1s in a DS3/E3 frame)
sendResetCode sending a loopback deactivation request NOTE: This is applicable only for DS3.
What is csDs3ConfigSendCode?
This read-write value both reports and, when set, commands which loopback-request code the DS3 interface transmits toward the far end. It lets a technician remotely request the far-end equipment to enter a line or payload loopback for circuit testing, or reset a previously requested loopback. For example, a technician sets csDs3ConfigSendCode to ds3SendLineCode to request a far-end line loopback, then checks continuity before setting it back to ds3SendNoCode to restore normal traffic.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3085.3.1.3.2.1.1.21 snmpwalk -v2c -c public <target> COSINE-ORION-MIB::csDs3ConfigSendCode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3085.3.1.3.2.1.1.21.1 snmpget -v2c -c public <target> COSINE-ORION-MIB::csDs3ConfigSendCode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3085.3.1.3.2.1.1.21.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> csDs3ConfigSendCode.1
Start monitoring CoSine Communications IPNOS blade-based service platform with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the COSINE-ORION-MIB::csDs3ConfigSendCode OID value, configure state conditions and alerts, and monitor any CoSine Communications IPNOS blade-based service platform from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3085 | csRoot | COSINE-GLOBAL-REG |
| 1.3.6.1.4.1.3085.3 | csProduct | COSINE-GLOBAL-REG |
| 1.3.6.1.4.1.3085.3.1 | csOrionMIB | COSINE-GLOBAL-REG |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3085.3.1.3 | csOrionPortInfo | COSINE-ORION-MIB |
| 1.3.6.1.4.1.3085.3.1.3.2 | csOrionDs3Info | COSINE-ORION-MIB |
| 1.3.6.1.4.1.3085.3.1.3.2.1 | csDs3ConfigTable | COSINE-ORION-MIB |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1 | csDs3ConfigEntry | COSINE-ORION-MIB |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.21 | csDs3ConfigSendCode | COSINE-ORION-MIB |