All MIBs › COSINE-ORION-MIB › csDs3Ds1LoopbackType
csDs3Ds1LoopbackType
Module: COSINE-ORION-MIB
OID (symbolic): COSINE-ORION-MIB::csDs3Ds1LoopbackType
OID (numeric): 1.3.6.1.4.1.3085.3.1.3.2.2.1.11
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object represents the desired loopback configuration of the DS1 interface. This variable will be interpreted only when csDs3Ds1LoopbackDestination is set to a valid value. NOTE: This is applicable only for T1.
noLoop Not in the loopback state. A device that is not capable of performing a loopback on the interface shall always return this as its value.
payloadLoop The received signal at this interface is looped through the device. Typically the received signal is looped back for retransmission after it has passed through the device's framing function.
lineLoop The received signal at this interface does not go through the device (minimum penetration) but is looped back out.
otherLoop Loopbacks that are not defined here. Currently not used in the IPSX system
inwardLoop The transmitted signal at this interface is looped back and received by the same interface. What is transmitted onto the line is product dependent. Cannot be applied to far end.
dualLoop Both dsx1LineLoop and dsx1InwardLoop will be active simultaneously. Cannot be applied to far end.
What is csDs3Ds1LoopbackType?
This read-write value specifies the desired loopback configuration for this DS1/T1 channel, which only takes effect once a valid loopback destination is separately configured, applicable only for T1. It gives a technician per-channel loopback testing on a channelized DS3, isolating a single customer's T1 for diagnosis. For example, a technician configures csDs3Ds1LoopbackType to lineLoop on one T1 channel to test that specific circuit's line integrity without looping the other channelized T1s on the same DS3.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3085.3.1.3.2.2.1.11 snmpwalk -v2c -c public <target> COSINE-ORION-MIB::csDs3Ds1LoopbackType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3085.3.1.3.2.2.1.11.1 snmpget -v2c -c public <target> COSINE-ORION-MIB::csDs3Ds1LoopbackType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3085.3.1.3.2.2.1.11.1 i <value>
Start monitoring CoSine Communications IPNOS blade-based service platform with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the COSINE-ORION-MIB::csDs3Ds1LoopbackType OID value, configure state conditions and alerts, and monitor any CoSine Communications IPNOS blade-based service platform from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3085 | csRoot | COSINE-GLOBAL-REG |
| 1.3.6.1.4.1.3085.3 | csProduct | COSINE-GLOBAL-REG |
| 1.3.6.1.4.1.3085.3.1 | csOrionMIB | COSINE-GLOBAL-REG |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3085.3.1.3 | csOrionPortInfo | COSINE-ORION-MIB |
| 1.3.6.1.4.1.3085.3.1.3.2 | csOrionDs3Info | COSINE-ORION-MIB |
| 1.3.6.1.4.1.3085.3.1.3.2.2 | csDs3Ds1ConfigTable | COSINE-ORION-MIB |
| 1.3.6.1.4.1.3085.3.1.3.2.2.1 | csDs3Ds1ConfigEntry | COSINE-ORION-MIB |
| 1.3.6.1.4.1.3085.3.1.3.2.2.1.11 | csDs3Ds1LoopbackType | COSINE-ORION-MIB |