All MIBs › COSINE-ORION-MIB › csUnchanDs3ConfigSendCode
csUnchanDs3ConfigSendCode
Module: COSINE-ORION-MIB
OID (symbolic): COSINE-ORION-MIB::csUnchanDs3ConfigSendCode
OID (numeric): 1.3.6.1.4.1.3085.3.1.3.2.10.1.20
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This variable indicates what type of code is being sent across the DS3 interface by the device. Setting this variable causes the interface to begin sending the code requested. NOTE: This is applicable only for DS3. The values mean:
sendNoCode sending looped or normal data
sendLineCode sending a request for a line loopback
sendResetCode sending a loopback deactivation request
What is csUnchanDs3ConfigSendCode?
csUnchanDs3ConfigSendCode is a read-write setting that tells the DS3 interface which maintenance code to transmit: normal or looped data (ds3SendNoCode), a request for a line loopback (ds3SendLineCode), or a loopback-reset request (ds3SendResetCode). It is an action-style control admins use to remotely request or clear a loopback on the far-end equipment for troubleshooting, without needing physical access to that device. For example, to verify a DS3 circuit end-to-end, an admin sets csUnchanDs3ConfigSendCode to ds3SendLineCode to request a far-end loopback, runs a test, then sets it to ds3SendResetCode to release that loopback afterward.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3085.3.1.3.2.10.1.20 snmpwalk -v2c -c public <target> COSINE-ORION-MIB::csUnchanDs3ConfigSendCode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3085.3.1.3.2.10.1.20.1 snmpget -v2c -c public <target> COSINE-ORION-MIB::csUnchanDs3ConfigSendCode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3085.3.1.3.2.10.1.20.1 i <value>
Start monitoring CoSine Communications IPNOS blade-based service platform with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the COSINE-ORION-MIB::csUnchanDs3ConfigSendCode OID value, configure state conditions and alerts, and monitor any CoSine Communications IPNOS blade-based service platform from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3085 | csRoot | COSINE-GLOBAL-REG |
| 1.3.6.1.4.1.3085.3 | csProduct | COSINE-GLOBAL-REG |
| 1.3.6.1.4.1.3085.3.1 | csOrionMIB | COSINE-GLOBAL-REG |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3085.3.1.3 | csOrionPortInfo | COSINE-ORION-MIB |
| 1.3.6.1.4.1.3085.3.1.3.2 | csOrionDs3Info | COSINE-ORION-MIB |
| 1.3.6.1.4.1.3085.3.1.3.2.10 | csUnchanDs3ConfigTable | COSINE-ORION-MIB |
| 1.3.6.1.4.1.3085.3.1.3.2.10.1 | csUnchanDs3ConfigEntry | COSINE-ORION-MIB |
| 1.3.6.1.4.1.3085.3.1.3.2.10.1.20 | csUnchanDs3ConfigSendCode | COSINE-ORION-MIB |