COSINE-ORION-MIB :: csDs3Ds1SendCode

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCOSINE-ORION-MIBcsDs3Ds1SendCode

csDs3Ds1SendCode

Module: COSINE-ORION-MIB

OID (symbolic): COSINE-ORION-MIB::csDs3Ds1SendCode

OID (numeric): 1.3.6.1.4.1.3085.3.1.3.2.2.1.10

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This variable indicates what type of code is being sent across the DS1 interface by the device. Setting this variable causes the interface to send the code requested. NOTE: This is applicable only for T1..

The values mean: ds1SendNoCode sending looped or normal data

ds1SendLineCode sending a request for a line loopback

ds1SendPayloadCode sending a request for a payload loopback

ds1SendResetCode sending a loopback termination request

What is csDs3Ds1SendCode?

This read-write value both reports and, when set, commands which loopback-request code this DS1/T1 channel transmits toward the far end, applicable only for T1. It lets a technician remotely request a far-end line or payload loopback on a specific channelized T1 without affecting the other T1 channels sharing the same DS3. For example, to test one customer's T1 circuit among many carried in a channelized DS3, a technician sets that channel's csDs3Ds1SendCode to ds1SendPayloadCode without disturbing the other channels.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3085.3.1.3.2.2.1.10
snmpwalk -v2c -c public <target> COSINE-ORION-MIB::csDs3Ds1SendCode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3085.3.1.3.2.2.1.10.1
snmpget -v2c -c public <target> COSINE-ORION-MIB::csDs3Ds1SendCode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.3085.3.1.3.2.2.1.10.1 i <value>

Start monitoring CoSine Communications IPNOS blade-based service platform with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the COSINE-ORION-MIB::csDs3Ds1SendCode OID value, configure state conditions and alerts, and monitor any CoSine Communications IPNOS blade-based service platform from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.3085csRootCOSINE-GLOBAL-REG
1.3.6.1.4.1.3085.3csProductCOSINE-GLOBAL-REG
1.3.6.1.4.1.3085.3.1csOrionMIBCOSINE-GLOBAL-REG
Numeric OIDNameModule
1.3.6.1.4.1.3085.3.1.3csOrionPortInfoCOSINE-ORION-MIB
1.3.6.1.4.1.3085.3.1.3.2csOrionDs3InfoCOSINE-ORION-MIB
1.3.6.1.4.1.3085.3.1.3.2.2csDs3Ds1ConfigTableCOSINE-ORION-MIB
1.3.6.1.4.1.3085.3.1.3.2.2.1csDs3Ds1ConfigEntryCOSINE-ORION-MIB
1.3.6.1.4.1.3085.3.1.3.2.2.1.10csDs3Ds1SendCodeCOSINE-ORION-MIB