COSINE-ORION-MIB :: csAtmInterfaceConfCurrentMaxVpiBits

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCOSINE-ORION-MIBcsAtmInterfaceConfCurrentMaxVpiBits

csAtmInterfaceConfCurrentMaxVpiBits

Module: COSINE-ORION-MIB

OID (symbolic): COSINE-ORION-MIB::csAtmInterfaceConfCurrentMaxVpiBits

OID (numeric): 1.3.6.1.4.1.3085.3.1.3.5.1.1.9

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description: The maximum number of VPI Bits that may currently be used at this ATM interface. The value is the minimum of AtmInterfaceMaxActiveVpiBits, and the AtmInterfaceMaxActiveVpiBits of the interface's UNI/NNI peer.

If the interface does not negotiate with its peer to determine the number of VPI Bits that can be used on the interface, then the value of this object must equal AtmInterfaceMaxActiveVpiBits.

What is csAtmInterfaceConfCurrentMaxVpiBits?

This read-only Integer32 (0 to 16) reports the maximum number of VPI bits currently usable on this ATM interface, computed as the minimum of the locally configured value and the peer's negotiated value, defaulting to the local configuration if no negotiation occurs. An admin checks this to confirm that VPI addressing negotiated with a UNI/NNI peer matches what was intended locally. For example, if csAtmInterfaceConfMaxActiveVpiBits is configured to 8 locally but the peer only supports 4, csAtmInterfaceConfCurrentMaxVpiBits would read 4, and the admin would know the effective VPI space is smaller than configured.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3085.3.1.3.5.1.1.9
snmpwalk -v2c -c public <target> COSINE-ORION-MIB::csAtmInterfaceConfCurrentMaxVpiBits

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3085.3.1.3.5.1.1.9.1
snmpget -v2c -c public <target> COSINE-ORION-MIB::csAtmInterfaceConfCurrentMaxVpiBits.1

Start monitoring CoSine Communications IPNOS blade-based service platform with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the COSINE-ORION-MIB::csAtmInterfaceConfCurrentMaxVpiBits OID value, configure state conditions and alerts, and monitor any CoSine Communications IPNOS blade-based service platform from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.3085csRootCOSINE-GLOBAL-REG
1.3.6.1.4.1.3085.3csProductCOSINE-GLOBAL-REG
1.3.6.1.4.1.3085.3.1csOrionMIBCOSINE-GLOBAL-REG
Numeric OIDNameModule
1.3.6.1.4.1.3085.3.1.3csOrionPortInfoCOSINE-ORION-MIB
1.3.6.1.4.1.3085.3.1.3.5csAtmInfoCOSINE-ORION-MIB
1.3.6.1.4.1.3085.3.1.3.5.1csAtmInterfaceConfTableCOSINE-ORION-MIB
1.3.6.1.4.1.3085.3.1.3.5.1.1csAtmInterfaceConfEntryCOSINE-ORION-MIB
1.3.6.1.4.1.3085.3.1.3.5.1.1.9csAtmInterfaceConfCurrentMaxVpiBitsCOSINE-ORION-MIB