All MIBs › COSINE-ORION-MIB › csDs3Ds1LineConfig
csDs3Ds1LineConfig
Module: COSINE-ORION-MIB
OID (symbolic): COSINE-ORION-MIB::csDs3Ds1LineConfig
OID (numeric): 1.3.6.1.4.1.3085.3.1.3.2.2.1.13
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: This variable represents DS1/E1 transmit line configuration. This is normally used for dignostic or service purpose, it is not supposed for user to configure.
The various bit positions are: BIT(0) not used BIT(1) ds1NoAlarm BIT(2) ds1RcvFarEndLOF BIT(3) ds1XmtFarEndLOF BIT(4) ds1RcvAIS BIT(5) ds1XmtAIS BIT(6) ds1LossOfFrame BIT(7) ds1LossOfSignal BIT(8) ds1LoopbackState BIT(9) ds1T16AIS BIT(10) ds1RcvFarEndLOMF BIT(11) ds1XmtFarEndLOMF BIT(12) ds1RcvTestCode BIT(13) ds1OtherFailure BIT(14) ds1UnavailSigState BIT(15) ds1NetEquipOOS BIT(16) ds1RcvPayloadAIS BIT(17) ds1Ds2PerfThreshold BIT(18) ds1XmtTrnkCond
What is csDs3Ds1LineConfig?
This read-write value is a bitmap representing this DS1/E1 channel's transmit line configuration, used mainly for diagnostic or service purposes rather than routine configuration. The description explicitly warns admins this isn't meant for normal end-user configuration, so it's primarily used by vendor service tools during deep troubleshooting. For example, a vendor support engineer, rather than a typical admin, reads and adjusts csDs3Ds1LineConfig bit-by-bit while diagnosing an obscure alarm-reporting discrepancy on a specific T1 channel.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3085.3.1.3.2.2.1.13 snmpwalk -v2c -c public <target> COSINE-ORION-MIB::csDs3Ds1LineConfig
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3085.3.1.3.2.2.1.13.1 snmpget -v2c -c public <target> COSINE-ORION-MIB::csDs3Ds1LineConfig.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3085.3.1.3.2.2.1.13.1 i <value>
Start monitoring CoSine Communications IPNOS blade-based service platform with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the COSINE-ORION-MIB::csDs3Ds1LineConfig OID value, configure state conditions and alerts, and monitor any CoSine Communications IPNOS blade-based service platform from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3085 | csRoot | COSINE-GLOBAL-REG |
| 1.3.6.1.4.1.3085.3 | csProduct | COSINE-GLOBAL-REG |
| 1.3.6.1.4.1.3085.3.1 | csOrionMIB | COSINE-GLOBAL-REG |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3085.3.1.3 | csOrionPortInfo | COSINE-ORION-MIB |
| 1.3.6.1.4.1.3085.3.1.3.2 | csOrionDs3Info | COSINE-ORION-MIB |
| 1.3.6.1.4.1.3085.3.1.3.2.2 | csDs3Ds1ConfigTable | COSINE-ORION-MIB |
| 1.3.6.1.4.1.3085.3.1.3.2.2.1 | csDs3Ds1ConfigEntry | COSINE-ORION-MIB |
| 1.3.6.1.4.1.3085.3.1.3.2.2.1.13 | csDs3Ds1LineConfig | COSINE-ORION-MIB |