CROUTE-MIB

All MIBs › CROUTE-MIB

Category: Routing Protocols, Vendor: Cabletron/Enterasys

Description: Manages Cabletron SSR routing configuration including static routes, routing table entries, and protocol parameters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CROUTE-MIB?

CROUTE-MIB is a private MIB (built on GEN-MIB, extending RMON-MIB) managing IP routing, BOOTP relay, and RIP configuration on this vendor's Layer 3 switch platform. Its objects cover BOOTP-relay status (enable/disable/backup/active-backup, the latter driven by IP-redundancy failover), ICMP-error-message enable, ARP inactive-timeout, an IP-interface table (address, netmask, lower-interface alias, type, broadcast-forwarding, broadcast address, proxy ARP, status, main-router address, ARP-server status, name, NetBIOS rebroadcast, ICMP redirects), and RIP globals/interface settings (enable, OSPF/static route leaking into RIP, metric). As a configuration/status MIB it lets an administrator confirm BOOTP relay's active/backup state and an IP interface's proxy-ARP and broadcast-forwarding settings. It is deployed on this vendor's Layer 3 switch platform. Engineers can download the CROUTE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CROUTE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Layer 3 switch platform (BOOTP relay/RIP)

Monitoring Examples

An administrator checks ipGlobalsBOOTPRelayStatus to confirm whether the BOOTP relay backup has taken over active duty after an IP-redundancy failover on this switch platform.

What Can Be Monitored

BOOTP relay active/backup state
IP interface proxy-ARP/broadcast configuration

Imported Objects

From GEN-MIB

lannet

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

IpAddress

From RFC1213-MIB

DisplayString
PhysAddress

From RMON-MIB

OwnerString

OIDs

OID symbolic	OID numeric	Type	Access	Description
croute	1.3.6.1.4.1.81.31
IP drIpInterfaceAddr	1.3.6.1.4.1.81.31.6.1.1.2	IpAddress	read-only	The IP address to which this entry's addressing information pertains.
INT drIpInterfaceARPServerStatus	1.3.6.1.4.1.81.31.6.1.1.11	INTEGER	read-write	Whenever to activate the ARP Server mechanism on this interface. enable - set by the user, means activate the ARP Server mechanism over this IP interface. disable - set by the user, means don't active the ARP Server mechanism over this IP interface.
INT drIpInterfaceBroadcastAddr	1.3.6.1.4.1.81.31.6.1.1.7	INTEGER	read-write	The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. For example, when the Internet standard all-ones broadcast address is used, the value will be 1. This value applies to both the subnet and network broadcasts addresses used by the entity on this (logical) interface.
drIpInterfaceEntry	1.3.6.1.4.1.81.31.6.1.1		not-accessible	The information concerning one of this entity's IP interfaces. An IP interface is a logical connection to a certain IP net/subnet.
INT drIpInterfaceForwardIpBroadcast	1.3.6.1.4.1.81.31.6.1.1.6	INTEGER	read-write	Whether the router forwards IP directed broadcasts that are to be transmitted as link-layer broadcast to an attached net or subnet.
INT drIpInterfaceIcmpRedirects	1.3.6.1.4.1.81.31.6.1.1.14	INTEGER	read-write	enable - enable the sending of redirect messages if the router is forced to re-send a packet through the same interface on which it was received. disable - disable the sending of redirect messages on this interface.
STR drIpInterfaceLowerIfAlias	1.3.6.1.4.1.81.31.6.1.1.4	DisplayString	read-write	This object is an 'alias' name for the lower-layer interface on top of which this IP interface is defined. The alias is specified by the network manager, and provides a non-volatile 'handle' for the lower-layer interface. The semantics of the object are similar to the semantics of the ifAlias object, defined by the Interfaces MIB. At the time when this Madge MIB object was defined, the latest release of the Interfaces MIB was draft-ietf-ifmib-mib-05.txt. The purpose is to support all methods (static or dynamic) for creation of interfaces and to allow creation of IP table entries without the need of the layer 2 interface to be present on the device at the time of the creation. It is assumed that some implementation dependent mechanisms allow the IP application to be informed about the creation of new lower layer interfaces.
IP drIpInterfaceMainRouterAddr	1.3.6.1.4.1.81.31.6.1.1.10	IpAddress	read-write	The IP address of the main router backed up on this interface.
STR drIpInterfaceName	1.3.6.1.4.1.81.31.6.1.1.12	DisplayString	read-write	The name of this interface for compatibility with cli.
INT drIpInterfaceNetbiosRebroadcast	1.3.6.1.4.1.81.31.6.1.1.13	INTEGER	read-write	inbound - netbios received from the interface are rebarodcasted, outbound - netbios are rebraodcasted to this interface, both - netbios are rebroadacsted both from and to this interface, disable - netbios is not rebraodcasted neither from nor to this interface. Currently only both and disable are supported
IP drIpInterfaceNetMask	1.3.6.1.4.1.81.31.6.1.1.3	IpAddress	read-write	The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
INT drIpInterfaceProxyArp	1.3.6.1.4.1.81.31.6.1.1.8	INTEGER	read-write	When proxy ARP is enabled, the router responds to ARP requests received on one link-layer interface for an IP-address that is reachable via another link-layer interface. The response provides the router's own MAC address.
INT drIpInterfaceSlot	1.3.6.1.4.1.81.31.6.1.1.1	INTEGER	read-only	The slot number of the module
ROW drIpInterfaceStatus	1.3.6.1.4.1.81.31.6.1.1.9	RowStatus	read-write	For adding and deleting IP interfaces. Deleting this row means deleting the corresponding entry in IpAddrTable (MIB II). Deleting an IP interface also causes deletion of all static routes defined on this IP interface, as well as protocol interfaces (e.g. RIP and OSPF) defined on this IP interface.
drIpInterfaceTable	1.3.6.1.4.1.81.31.6.1		not-accessible	This table is an extention of MIB II IpAddrTable, and is used to add/delete entries to/from that table. In addition it contains private objects.
INT drIpInterfaceType	1.3.6.1.4.1.81.31.6.1.1.5	INTEGER	read-write	The logical type of the interface. The default depends on the physical type. For example Ethernet and Token-Ring LANs are of type broadcast
drIpRoute	1.3.6.1.4.1.81.31.6
drLayer2	1.3.6.1.4.1.81.31.5
drStaticCidr	1.3.6.1.4.1.81.31.7
INT drStaticCidrCRPType	1.3.6.1.4.1.81.31.7.1.1.10	INTEGER	read-write	The internal type of this static routing entry. routingFWLB - Route to a group of routing Firewallse bridgingFWLB - Route through a group of bridging Firewalls regularStatic - Regular static routes
IP drStaticCidrDest	1.3.6.1.4.1.81.31.7.1.1.2	IpAddress	read-only	Equivalent to ipCidrRouteDest. The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the drStaticCidrMask object is not equal to x.
INT drStaticCidrEntID	1.3.6.1.4.1.81.31.7.1.1.1	INTEGER	read-only	The Id of the entity for which a set of rows applies. This index is provided as a mean of distributing non-related information on different entities such as physical modules. The value: The module ID (slot number).
drStaticCidrEntry	1.3.6.1.4.1.81.31.7.1.1		not-accessible	A particular route to a particular destina- tion, under a particular policy.
INT drStaticCidrIfIndex	1.3.6.1.4.1.81.31.7.1.1.6	INTEGER	read-write	Equivalent to ipCidrRouteIfIndex. The ifIndex value which identifies the local interface through which the next hop of this route should be reached.
IP drStaticCidrMask	1.3.6.1.4.1.81.31.7.1.1.3	IpAddress	read-only	Equivalent to ipCidrRouteMask. Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the drStaticCidrDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the drStaticCidrMask by reference to the IP Ad- dress Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the drStaticCidrDest object is not equal to drStaticCidr- Dest.
INT drStaticCidrMetric1	1.3.6.1.4.1.81.31.7.1.1.8	INTEGER	read-write	Equivalent to ipCidrRouteMetric1. The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's drStaticCidrProto value. If this metric is not used, its value should be set to -1.
STR drStaticCidrName	1.3.6.1.4.1.81.31.7.1.1.12	DisplayString	read-write	A label given to this route by the user. Has no equivalent in ipCidrRouteTable.
IP drStaticCidrNextHop	1.3.6.1.4.1.81.31.7.1.1.5	IpAddress	read-only	Equivalent to ipCidrRouteNextHop. On remote routes, the address of the next sys- tem en route; Otherwise, 0.0.0.0.
INT drStaticCidrOperStatus	1.3.6.1.4.1.81.31.7.1.1.11	INTEGER	read-only	The operational status of this route. up - the route is active, and is present in ipCidrRouteTable. down - the route is inactive; it is not present in ipCidrRouteTable.
INT drStaticCidrPrecedence	1.3.6.1.4.1.81.31.7.1.1.9	INTEGER	read-write	Equivalent to ipCidrRouteMetric5 (our use of it). The precedence of this routing rule, compared to other routes which may have been learned vie other methods. Translates into ipCidrRouteMetric5 in ipCidrRouteTable (RFC2096). Higher values mean lower precedence. The Agent initialize this value as follows: 0 - drStaticCidrCRPType of bridgingFWLB or routingFWLB 250 - drStaticCidrCRPType of regularStatic
ROW drStaticCidrStatus	1.3.6.1.4.1.81.31.7.1.1.14	RowStatus	read-write	Creation, activation, de-activation and deletion of a static route, using the RowStatus convention: active(1), notInService(2) ,notReady(3), createAndGo(4), createAndWait(5), destroy(6). when an entry is placed in the notInService state, the corresponding route is disabled (removed from ipCidrRouteTable)
drStaticCidrTable	1.3.6.1.4.1.81.31.7.1		not-accessible	The static route table for this entity. The table includes all static routes, both active and inactive. Note that inactive static routes are deleted from RFC2096 ipCidrRouteTable; Hence the need for this private table to maintain user configuration about disabled routes. The table also includes the EntID index, to allow for use in a distributed environment.
INT drStaticCidrTos	1.3.6.1.4.1.81.31.7.1.1.4	INTEGER	read-only	Equivalent to ipCidrRouteTos. The policy specifier is the IP TOS Field. The encoding of IP TOS is as specified by the following convention. Zero indicates the default path if no more specific policy applies. +-----+-----+-----+-----+-----+-----+-----+-----+ \| \| \| \| \| PRECEDENCE \| TYPE OF SERVICE \| 0 \| \| \| \| \| +-----+-----+-----+-----+-----+-----+-----+-----+ IP TOS IP TOS Field Policy Field Policy Contents Code Contents Code 0 0 0 0 ==> 0 0 0 0 1 ==> 2 0 0 1 0 ==> 4 0 0 1 1 ==> 6 0 1 0 0 ==> 8 0 1 0 1 ==> 10 0 1 1 0 ==> 12 0 1 1 1 ==> 14 1 0 0 0 ==> 16 1 0 0 1 ==> 18 1 0 1 0 ==> 20 1 0 1 1 ==> 22 1 1 0 0 ==> 24 1 1 0 1 ==> 26 1 1 1 0 ==> 28 1 1 1 1 ==> 30
INT drStaticCidrType	1.3.6.1.4.1.81.31.7.1.1.7	INTEGER	read-write	Equivalent to ipCidrRouteType. The type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for which the next hop is not the final destina- tion. reject (2) refers to a route which, if matched, discards the message as unreachable. This is used in some protocols as a means of correctly aggregating routes.
STR drStaticOwner	1.3.6.1.4.1.81.31.7.1.1.13	OwnerString	read-write	The user who is responsible for the entry. Management Apps should write: 'user on host' CLI should write:CLI_User on local device
STR drVlConfAlias	1.3.6.1.4.1.81.31.5.1.1.3	DisplayString	read-write	This object is an 'alias' name for the lower-layer interface on top of which this IP interface is defined. The alias is specified by the network manager, and provides a non-volatile 'handle' for the lower-layer interface. The semantics of the object are similar to the semantics of the ifAlias object, defined by the Interfaces MIB. At the time when this Madge MIB object was defined, the latest release of the Interfaces MIB was draft-ietf-ifmib-mib-05.txt. The purpose is to support all methods (static or dynamic) for creation of interfaces and to allow creation of IP table entries without the need of the layer 2 interface to be present on the device at the time of the creation. It is assumed that some implementation dependent mechanisms allow the IP application to be informed about the creation of new lower layer interfaces.
drVlConfEntry	1.3.6.1.4.1.81.31.5.1.1		not-accessible	The information concerning one of this entity's VLAN interfaces. An VLAN interface is a virtual connection to a switch.
INT drVlConfIndex	1.3.6.1.4.1.81.31.5.1.1.2	INTEGER	read-only	A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
INT drVlConfSlot	1.3.6.1.4.1.81.31.5.1.1.1	INTEGER	read-only	The slot number of the module
ROW drVlConfStatus	1.3.6.1.4.1.81.31.5.1.1.4	RowStatus	read-write	For adding and deleting VLAN interfaces. Deleting this row means deleting the corresponding entry in ifTable (MIB II). Deleting a VLAN interface is allowed only if IP interface is not defined on this VLAN.
drVlConfTable	1.3.6.1.4.1.81.31.5.1		not-accessible	This table is an extention of MIB II ifTable, and is used to add/delete entries to/from that table. In addition it contains private objects.
INT ipAccessControlActivation	1.3.6.1.4.1.81.31.1.8.1.7	INTEGER	read-write	Does the IP ACCESS CONTROL statement done by HW or SW(CPU). HW - wire-speed, SW - regular.
INT ipAccessControlApplication	1.3.6.1.4.1.81.31.1.8.1.9	INTEGER	read-write	Over which application does the IP ACCESS CONTROL statement activate. The exception are: above1023 can work over TCP or UDP, none can't work over TCP or UDP or ICMP only none is excepted
IP ipAccessControlDstAddr	1.3.6.1.4.1.81.31.1.8.1.4	IpAddress	read-write	The IP address of the destination address.
IP ipAccessControlDstMask	1.3.6.1.4.1.81.31.1.8.1.5	IpAddress	read-write	The MASK address of the destination address.
INT ipAccessControlEnable	1.3.6.1.4.1.81.31.1.7.1	INTEGER	read-write	Whenever to activate the IP ACCESS CONTROL statements on the device. disable means don't activate IP ACCESS CONTROL over all the IP statements enable means activate IP ACCESS CONTROL over all the IP statements
ipAccessControlEntry	1.3.6.1.4.1.81.31.1.8.1		not-accessible	The information concerning one of this entity's IP interfaces. An IP interface is a logical connection to a certain IP net/subnet.
INT ipAccessControlIndex	1.3.6.1.4.1.81.31.1.8.1.1	INTEGER	read-only	Entry index.
INT ipAccessControlOperation	1.3.6.1.4.1.81.31.1.8.1.6	INTEGER	read-write	How to operate the IP ACCESS CONTROL statement, on the receiving packet. Forwards the packet, Block (Discard) the packet or block (Discard) the packet and report to the user by sending trap.
INT ipAccessControlProtocol	1.3.6.1.4.1.81.31.1.8.1.8	INTEGER	read-write	Over which protocol does the IP ACCESS CONTROL statement activate. Icmp, Tcp, Udp. None - means IP addresses only
IP ipAccessControlSrcAddr	1.3.6.1.4.1.81.31.1.8.1.2	IpAddress	read-write	The IP address of the source address.
IP ipAccessControlSrcMask	1.3.6.1.4.1.81.31.1.8.1.3	IpAddress	read-write	The MASK address of the source address.
ROW ipAccessControlStatus	1.3.6.1.4.1.81.31.1.8.1.10	RowStatus	read-write	For create/delete of a IP ACCESS CONTROL statement.
ipAccessControlTable	1.3.6.1.4.1.81.31.1.8		not-accessible	This table is used to add/delete access control statement to/from that table.
ipAccessGlobals	1.3.6.1.4.1.81.31.1.7
IP ipEZ2BoostRouterBRAddress	1.3.6.1.4.1.81.31.1.13.1.1.2	IpAddress	read-only
ipEZ2BoostRouterEntry	1.3.6.1.4.1.81.31.1.13.1.1		not-accessible
INT ipEZ2BoostRouterSlot	1.3.6.1.4.1.81.31.1.13.1.1.1	INTEGER	read-only
ROW ipEZ2BoostRouterStatus	1.3.6.1.4.1.81.31.1.13.1.1.4	RowStatus	read-write
ipEZ2BoostRouterTable	1.3.6.1.4.1.81.31.1.13.1		not-accessible
INT ipEZ2BoostRouterType	1.3.6.1.4.1.81.31.1.13.1.1.3	INTEGER	read-only
INT ipEZ2RControlAutoLearnMode	1.3.6.1.4.1.81.31.1.13.2.1.5	INTEGER	read-write
INT ipEZ2RControlBoostedRoutersTimeout	1.3.6.1.4.1.81.31.1.13.2.1.2	INTEGER	read-write	Set the timeout of EZ2route routers
ipEZ2RControlEntry	1.3.6.1.4.1.81.31.1.13.2.1		not-accessible
INT ipEZ2RControlHostsTimeout	1.3.6.1.4.1.81.31.1.13.2.1.3	INTEGER	read-write	Set the timeout of EZ2route hosts
INT ipEZ2RControlSlot	1.3.6.1.4.1.81.31.1.13.2.1.1	INTEGER	read-only
ipEZ2RControlTable	1.3.6.1.4.1.81.31.1.13.2		not-accessible
ipEZ2RouteMgmt	1.3.6.1.4.1.81.31.1.13
ipGlobals	1.3.6.1.4.1.81.31.1.1
INT ipGlobalsARPInactiveTimeout	1.3.6.1.4.1.81.31.1.1.3	INTEGER	read-write	Time-out required to remove inactive ARP entries. The value is in seconds. The default value is 4 hours
INT ipGlobalsBOOTPRelayStatus	1.3.6.1.4.1.81.31.1.1.1	INTEGER	read-write	Whenever to activate the BOOTP Relay protocol on the device. enable - set by the user, means activate the BOOTP Relay protocol over the defined VLANs. disable - set by the user, means don't active the BOOTP Relay protocol. backup - set by the user, means the BOOTP Relay protocol is in stand-by. It will enter to activeBackup mode after IP REDUNDANCY mechanism will enter to active mode. activeBackup - set by the device (status), means the backup BOOTP Relay is working (after time-out of IP REDUNDANCY).
INT ipGlobalsICMPErrMsgEnable	1.3.6.1.4.1.81.31.1.1.2	INTEGER	read-write	Whenever to send ICMP messages such as Destination Unreachable, etc.
IP ipInterfaceAddr	1.3.6.1.4.1.81.31.1.2.1.1	IpAddress	read-only	The IP address to which this entry's addressing information pertains.
INT ipInterfaceARPServerStatus	1.3.6.1.4.1.81.31.1.2.1.10	INTEGER	read-write	Whenever to activate the ARP Server mechanism on this interface. enable - set by the user, means activate the ARP Server mechanism over this IP interface. disable - set by the user, means don't active the ARP Server mechanism over this IP interface.
INT ipInterfaceBroadcastAddr	1.3.6.1.4.1.81.31.1.2.1.6	INTEGER	read-write	The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. For example, when the Internet standard all-ones broadcast address is used, the value will be 1. This value applies to both the subnet and network broadcasts addresses used by the entity on this (logical) interface.
ipInterfaceEntry	1.3.6.1.4.1.81.31.1.2.1		not-accessible	The information concerning one of this entity's IP interfaces. An IP interface is a logical connection to a certain IP net/subnet.
INT ipInterfaceForwardIpBroadcast	1.3.6.1.4.1.81.31.1.2.1.5	INTEGER	read-write	Whether the router forwards IP directed broadcasts that are to be transmitted as link-layer broadcast to an attached net or subnet.
INT ipInterfaceIcmpRedirects	1.3.6.1.4.1.81.31.1.2.1.13	INTEGER	read-write	enable - enable the sending of redirect messages if the router is forced to re-send a packet through the same interface on which it was received. disable - disable the sending of redirect messages on this interface.
STR ipInterfaceLowerIfAlias	1.3.6.1.4.1.81.31.1.2.1.3	DisplayString	read-write	This object is an 'alias' name for the lower-layer interface on top of which this IP interface is defined. The alias is specified by the network manager, and provides a non-volatile 'handle' for the lower-layer interface. The semantics of the object are similar to the semantics of the ifAlias object, defined by the Interfaces MIB. At the time when this Madge MIB object was defined, the latest release of the Interfaces MIB was draft-ietf-ifmib-mib-05.txt. The purpose is to support all methods (static or dynamic) for creation of interfaces and to allow creation of IP table entries without the need of the layer 2 interface to be present on the device at the time of the creation. It is assumed that some implementation dependent mechanisms allow the IP application to be informed about the creation of new lower layer interfaces.
IP ipInterfaceMainRouterAddr	1.3.6.1.4.1.81.31.1.2.1.9	IpAddress	read-write	The IP address of the main router backed up on this interface.
STR ipInterfaceName	1.3.6.1.4.1.81.31.1.2.1.11	DisplayString	read-write	The name of this interface for compatibility with cli.
INT ipInterfaceNetbiosRebroadcast	1.3.6.1.4.1.81.31.1.2.1.12	INTEGER	read-write	inbound - netbios received from the interface are rebarodcasted, outbound - netbios are rebraodcasted to this interface, both - netbios are rebroadacsted both from and to this interface, disable - netbios is not rebraodcasted neither from nor to this interface. Currently only both and disable are supported
IP ipInterfaceNetMask	1.3.6.1.4.1.81.31.1.2.1.2	IpAddress	read-write	The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
INT ipInterfaceProxyArp	1.3.6.1.4.1.81.31.1.2.1.7	INTEGER	read-write	When proxy ARP is enabled, the router responds to ARP requests received on one link-layer interface for an IP-address that is reachable via another link-layer interface. The response provides the router's own MAC address.
ROW ipInterfaceStatus	1.3.6.1.4.1.81.31.1.2.1.8	RowStatus	read-write	For adding and deleting IP interfaces. Deleting this row means deleting the corresponding entry in IpAddrTable (MIB II). Deleting an IP interface also causes deletion of all static routes defined on this IP interface, as well as protocol interfaces (e.g. RIP and OSPF) defined on this IP interface.
ipInterfaceTable	1.3.6.1.4.1.81.31.1.2		not-accessible	This table is an extention of MIB II IpAddrTable, and is used to add/delete entries to/from that table. In addition it contains private objects.
INT ipInterfaceType	1.3.6.1.4.1.81.31.1.2.1.4	INTEGER	read-write	The logical type of the interface. The default depends on the physical type. For example Ethernet and Token-Ring LANs are of type broadcast
ipMulticastInterfaceEntry	1.3.6.1.4.1.81.31.1.11.1		not-accessible	The information concerning one of this entity's interfaces.
INT ipMulticastInterfaceIfIndex	1.3.6.1.4.1.81.31.1.11.1.1	INTEGER	read-only	A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
INT ipMulticastInterfaceSendAll	1.3.6.1.4.1.81.31.1.11.1.2	INTEGER	read-write	The user will be able to configure whenever to send the all Multicast packets to this interface. Enable - Enable the user to define this interface, over all the existing groups Disable - Will acts according to the other parameters.
INT ipMulticastInterfaceState	1.3.6.1.4.1.81.31.1.11.1.3	INTEGER	read-only	The current state (operational) of the IP Multicast from IP Multicast point of view. It depends on global ipMRouteEnable status and Multicast interface status. Inactive - set by the device (status), Global IP multicast is disabled or Multicast is disable on this interface. Active - set by the device (status), Global IP multicast is enable and Multicast is active on this interface.
ROW ipMulticastInterfaceStatus	1.3.6.1.4.1.81.31.1.11.1.4	RowStatus	read-write	For enable/disable of a IP multicast over an interface.
ipMulticastInterfaceTable	1.3.6.1.4.1.81.31.1.11		not-accessible	This table is used to update multicast parameters over interfaces already define
ipRedundancyGlobals	1.3.6.1.4.1.81.31.1.9
INT ipRedundancyPollingInterval	1.3.6.1.4.1.81.31.1.9.3	INTEGER	read-write	The polling interval used to poll the Main (Backed up) router. The value is multiply of ipRedundancyTimeout. The value is in seconds. The default value is 3
INT ipRedundancyStatus	1.3.6.1.4.1.81.31.1.9.1	INTEGER	read-write	Whenever to activate the IP REDUNDANCY mechanism on the device. enable - set by the user, means activate the IP REDUNDANCY mechanism over the defined IP interfaces. disable - set by the user, means don't active the IP REDUNDANCY mechanism over the defined IP interfaces. inactive - set by the device (status), means the backup interface is in stand-by (after enable operation). active - set by the device (status), means the backup interface is working (after time-out).
INT ipRedundancyTimeout	1.3.6.1.4.1.81.31.1.9.2	INTEGER	read-write	Time-out required to activate the backup process of IP REDUNDANCY. After Time-out the Redundant router assumes that the main (Backuped) router is not operational, and takes control over all defined IP interfaces of the main. The value is in seconds. The default value is 12
ipRoute	1.3.6.1.4.1.81.31.1
INT ipShortcutARPServerStatus	1.3.6.1.4.1.81.31.1.10.1	INTEGER	read-write	Whenever to activate the ARP Server mechanism on the device. enable - set by the user, means activate the ARP Server mechanism over the defined IP interfaces. disable - set by the user, means don't active the ARP Server mechanism over the defined IP interfaces.
ipShortcutGlobals	1.3.6.1.4.1.81.31.1.10
ipVRRP	1.3.6.1.4.1.81.31.1.14
INT ipVRRPAdminStatus	1.3.6.1.4.1.81.31.1.14.1	INTEGER	read-write	Global switch to enable/disable VRRP
INT ipxAccessControlActivation	1.3.6.1.4.1.81.31.2.5.1.5	INTEGER	read-write	Does the IPX ACCESS CONTROL statement done by HW or SW(CPU). HW - wire-speed, SW - regular.
NET ipxAccessControlDstAddr	1.3.6.1.4.1.81.31.2.5.1.3	NetNum	read-write	The IPX network of the destination address.
INT ipxAccessControlEnable	1.3.6.1.4.1.81.31.2.4.1	INTEGER	read-write	Whenever to activate the IPX ACCESS CONTROL statements on the device. disable means don't activate IPX ACCESS CONTROL over all the IPX statements enable means activate IPX ACCESS CONTROL over all the IPX statements
ipxAccessControlEntry	1.3.6.1.4.1.81.31.2.5.1		not-accessible	The information concerning one of this entity's IPX access control statements.
INT ipxAccessControlIndex	1.3.6.1.4.1.81.31.2.5.1.1	INTEGER	read-only	Entry index.
INT ipxAccessControlOperation	1.3.6.1.4.1.81.31.2.5.1.4	INTEGER	read-write	How to operate the IPX ACCESS CONTROL statement, on the receiving packet. Forwards the packet, Block (Discard) the packet or block (Discard) the packet and report to the user by sending trap.
NET ipxAccessControlSrcAddr	1.3.6.1.4.1.81.31.2.5.1.2	NetNum	read-write	The IPX network of the source address.
ROW ipxAccessControlStatus	1.3.6.1.4.1.81.31.2.5.1.6	RowStatus	read-write	For create/delete of an IPX ACCESS CONTROL statement.
ipxAccessControlTable	1.3.6.1.4.1.81.31.2.5		not-accessible	This table is used to add/delete IPX access control statement to/from that table.
ipxAccessGlobals	1.3.6.1.4.1.81.31.2.4
INT ipxCircEncapsulation	1.3.6.1.4.1.81.31.2.1.1.4	INTEGER	read-write	The media type (encapsulation of layer2) of this circuit.
ipxCircEntry	1.3.6.1.4.1.81.31.2.1.1		not-accessible	The information concerning one of this entity's IPX circuits. An IPX circuit is a logical connection to a certain IPX netNumber.
INT ipxCircGetNearestServerReply	1.3.6.1.4.1.81.31.2.1.1.12	INTEGER	read-write	Indicates whether to respond to SAP get nearest server requests received on this circuit.
INT ipxCircIndex	1.3.6.1.4.1.81.31.2.1.1.1	INTEGER	read-only	The identifier of this circuit, unique within the instance of IPX. This value may be written only when creating a new entry in the table.
STR ipxCircLowerIfAlias	1.3.6.1.4.1.81.31.2.1.1.3	DisplayString	read-write	This object is an 'alias' name for the lower-layer interface on top of which this IP interface is defined. The alias is specified by the network manager, and provides a non-volatile 'handle' for the lower-layer interface. The semantics of the object are similar to the semantics of the ifAlias object, defined by the Interfaces MIB. At the time when this Madge MIB object was defined, the latest release of the Interfaces MIB was draft-ietf-ifmib-mib-05.txt. The purpose is to support all methods (static or dynamic) for creation of interfaces and to allow creation of IPX table entries without the need of the layer 2 interface to be present on the device at the time of the creation. It is assumed that some implementation dependent mechanisms allow the IPX application to be informed about the creation of new lower layer interfaces.
INT ipxCircNetbios	1.3.6.1.4.1.81.31.2.1.1.5	INTEGER	read-write	The type of the circuit.
NET ipxCircNetNumber	1.3.6.1.4.1.81.31.2.1.1.2	NetNum	read-write	The IPX network number of this circuit.
INT ipxCircRipAgeMultiplier	1.3.6.1.4.1.81.31.2.1.1.8	INTEGER	read-write	The holding multiplier for information received in RIP periodic updates.
INT ipxCircRipState	1.3.6.1.4.1.81.31.2.1.1.14	INTEGER	read-only	Indicates whether RIP information may be sent/received over this circuit. Set by the device to reflect the RIP status and the interface status
INT ipxCircRipStatus	1.3.6.1.4.1.81.31.2.1.1.9	INTEGER	read-write	Indicates whether RIP information may be sent/received over this circuit. Set by the user
INT ipxCircRipUpdate	1.3.6.1.4.1.81.31.2.1.1.7	INTEGER	read-write	The RIP periodic update interval, in seconds.
INT ipxCircSapAgeMultiplier	1.3.6.1.4.1.81.31.2.1.1.11	INTEGER	read-write	The holding multiplier for information received in SAP periodic updates.
INT ipxCircSapState	1.3.6.1.4.1.81.31.2.1.1.15	INTEGER	read-only	Indicates whether SAP information may be sent/received over this circuit. Set by the device to reflect the SAP status and the interface status
INT ipxCircSapStatus	1.3.6.1.4.1.81.31.2.1.1.13	INTEGER	read-write	Indicates whether SAP information may be sent/received over this circuit.
INT ipxCircSapUpdate	1.3.6.1.4.1.81.31.2.1.1.10	INTEGER	read-write	The SAP periodic update interval, in seconds.
ROW ipxCircStatus	1.3.6.1.4.1.81.31.2.1.1.6	RowStatus	read-write	For adding and deleting Circuits. Deleting this row means deleting the corresponding entry in ipxCircTable. Deleting a Circuit also causes deletion of all static routes defined on this Circuit, as well as protocol Circuit (e.g. RIP and SAP) defined on this Circuit.
ipxCircTable	1.3.6.1.4.1.81.31.2.1		not-accessible	This table is an extention of Novell mib IpxCircTable, and is used to add/delete entries to/from that table. In addition it contains private objects.
INT ipxDestAge	1.3.6.1.4.1.81.31.2.2.1.9	INTEGER	read-only	The age of the Routing table entry.
ipxDestEntry	1.3.6.1.4.1.81.31.2.2.1		not-accessible	The information concerning one of this entity's IPX Routes. An IPX service is a logical connection to a certain IPX Server.
INT ipxDestHopCount	1.3.6.1.4.1.81.31.2.2.1.4	INTEGER	read-write	The number of hops necessary to reach the destination.
NET ipxDestNetNum	1.3.6.1.4.1.81.31.2.2.1.1	NetNum	read-only	The IPX network number portion of the IPX address of the destination.
INT ipxDestNextHopCircIndex	1.3.6.1.4.1.81.31.2.2.1.5	INTEGER	read-write	The unique identifier of the circuit, used to reach the next hop.
NET ipxDestNextHopNetNum	1.3.6.1.4.1.81.31.2.2.1.7	NetNum	read-write	The IPX network number of the next hop.
PHY ipxDestNextHopNICAddress	1.3.6.1.4.1.81.31.2.2.1.6	PhysAddress	read-write	The NIC address of the next hop.
INT ipxDestProtocol	1.3.6.1.4.1.81.31.2.2.1.2	INTEGER	read-only	The routing protocol from which knowledge of this destination was obtained.
ROW ipxDestStatus	1.3.6.1.4.1.81.31.2.2.1.8	RowStatus	read-write
ipxDestTable	1.3.6.1.4.1.81.31.2.2		not-accessible	This table replace the Novell mib IpxDestTable, and is used to add/delete entries to/from that table.
INT ipxDestTicks	1.3.6.1.4.1.81.31.2.2.1.3	INTEGER	read-write	The delay in ticks to reach this destination.
ipxRoute	1.3.6.1.4.1.81.31.2
INT ipxSapFilterAction	1.3.6.1.4.1.81.31.2.7.1.7	INTEGER	read-write	Permit/deny receiving/transmitting of SAP entry
INT ipxSapFilterCircIndex	1.3.6.1.4.1.81.31.2.7.1.2	INTEGER	read-write	.... -- 0xffff means this is a global SAP filter
INT ipxSapFilterDirection	1.3.6.1.4.1.81.31.2.7.1.6	INTEGER	read-write	Type of filter-input or output
INT ipxSapFilterEnable	1.3.6.1.4.1.81.31.2.6.1	INTEGER	read-write	Whenever to activate the IPX SAP Filters statements on the device. disable means don't activate IPX SAP Filters over all the IPX SAP statements enable means activate IPX SAP Filter over all the IPX SAP statements
ipxSapFilterEntry	1.3.6.1.4.1.81.31.2.7.1		not-accessible	An entry in the SAP filter table
ipxSapFilterGlobals	1.3.6.1.4.1.81.31.2.6
INT ipxSapFilterID	1.3.6.1.4.1.81.31.2.7.1.1	INTEGER	read-only	ID of SAP filter.
STR ipxSapFilterServerName	1.3.6.1.4.1.81.31.2.7.1.5	DisplayString	read-write	The name of the service which may be filtered; wildcards () may be used in the end of the name. DEFVAL {}
NET ipxSapFilterServiceNetNumber	1.3.6.1.4.1.81.31.2.7.1.3	NetNum	read-write	Number network of the filtered service. Value 0xFFFFFFFF applies for any network. DEFVAL {0xFFFFFFFF}
INT ipxSapFilterServiceType	1.3.6.1.4.1.81.31.2.7.1.4	INTEGER	read-write	The type of the service which may be filtered; value 0xFFFF applies for all types of service and it's default DEFVAL {0xFFFF}
ROW ipxSapFilterStatus	1.3.6.1.4.1.81.31.2.7.1.8	RowStatus	read-write	....
ipxSapFilterTable	1.3.6.1.4.1.81.31.2.7		not-accessible	Table of input/output SAP filter according to IPX circuit number.
INT ipxServAge	1.3.6.1.4.1.81.31.2.3.1.9	INTEGER	read-only	The age of the SAP entry.
ipxServEntry	1.3.6.1.4.1.81.31.2.3.1		not-accessible	The information concerning one of this entity's IPX Services. An IPX service is a logical connection to a certain IPX Server.
INT ipxServHopCount	1.3.6.1.4.1.81.31.2.3.1.7	INTEGER	read-write	The number of hops to the service.
STR ipxServName	1.3.6.1.4.1.81.31.2.3.1.2	DisplayString	read-only	The server name.
NET ipxServNetNum	1.3.6.1.4.1.81.31.2.3.1.4	NetNum	read-write	The IPX network number portion of the IPX address of the service.
OCT ipxServNode	1.3.6.1.4.1.81.31.2.3.1.5	OCTET STRING	read-write	The node portion of the IPX address of the service.
INT ipxServProtocol	1.3.6.1.4.1.81.31.2.3.1.3	INTEGER	read-only	The protocol from which knowledge of this service was obtained.
INT ipxServSocket	1.3.6.1.4.1.81.31.2.3.1.6	INTEGER	read-write	The socket portion of the IPX address of the service.
ROW ipxServStatus	1.3.6.1.4.1.81.31.2.3.1.8	RowStatus	read-write
ipxServTable	1.3.6.1.4.1.81.31.2.3		not-accessible	This table replace the Novell mib IpxServTable, and is used to add/delete entries to/from that table.
INT ipxServType	1.3.6.1.4.1.81.31.2.3.1.1	INTEGER	read-only	The service type.
layer2	1.3.6.1.4.1.81.31.3
layer2Globals	1.3.6.1.4.1.81.31.3.3
INT layer2GlobalsBridgeEnable	1.3.6.1.4.1.81.31.3.3.1	INTEGER	read-write	Whenever to activate the Bridge capability on the device. enable - set by the user, means activate the Bridge capability over the defined VLANs. disable - set by the user, means don't active the Bridge capability. backup - set by the user, means the Bridge capability is in stand-by. It will enter to activeBackup mode after IP REDUNDANCY mechanism will enter to active mode. activeBackup - set by the device (status), means the backup Bridge is working (after time-out of IP REDUNDANCY).
ospfGlobals	1.3.6.1.4.1.81.31.1.5
INT ospfGlobalsLeakDirectIntoOSPF	1.3.6.1.4.1.81.31.1.5.3	INTEGER	read-write	Whenever to leak (redistribute) routes learned from Direct into the domain of the OSPF protocol.
INT ospfGlobalsLeakRIPIntoOSPF	1.3.6.1.4.1.81.31.1.5.1	INTEGER	read-write	Whenever to leak (redistribute) routes learned from RIP protocol into the domain of the OSPF protocol.
INT ospfGlobalsLeakStaticIntoOSPF	1.3.6.1.4.1.81.31.1.5.2	INTEGER	read-write	Whenever to leak (redistribute) routes learned from Static Route into the domain of the OSPF protocol.
relayEntry	1.3.6.1.4.1.81.31.1.6.1		not-accessible	The information concerning one of this entity's VLAN interfaces. An VLAN interface is a virtual connection to a switch.
relayTable	1.3.6.1.4.1.81.31.1.6		not-accessible	This table is an extention of vlConfTable, and is used to add/delete DHCP Servers to/from that table.
INT relayVlIndex	1.3.6.1.4.1.81.31.1.6.1.1	INTEGER	read-only	A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
IP relayVlPrimaryServerAddr	1.3.6.1.4.1.81.31.1.6.1.2	IpAddress	read-write	The IP address of the primary server, to which the BOOTP/DHCP requests to be sent.
IP relayVlRelayAddr	1.3.6.1.4.1.81.31.1.6.1.5	IpAddress	read-write	The IP address of the Relay, i.e. the router's IP address to write in the relayed request (giaddr field in the Bootp packet). When there are multiple IP interfaces on the same VLAN such that the router has multiple IP addresses on the VLAN, the user can configure which of these addresses to use when relaying requests arriving on this VLAN. This relay address is used by the server to determines the subnet from which the address shall be allocated. The special value 255.255.255.255 means DUPLICATE. In this case the Relay will duplicate each request arriving on this VLAN and send to the server multiple copies of the request, a copy for each of the router's IP addresses on that VLAN. The relay address in each copy of the request shall be the router's IP address (NOT 255.255.255.255). The special value 0.0.0.0 means that the router shall use the Default value (lowest IP address on the VLAN) for the relay address
IP relayVlSeconderyServerAddr	1.3.6.1.4.1.81.31.1.6.1.3	IpAddress	read-write	The IP address of the secondary server, to which the BOOTP/DHCP requests to be sent.
ROW relayVlStatus	1.3.6.1.4.1.81.31.1.6.1.4	RowStatus	read-write	For deleting an DHCP/BOOTP servers entry. The entry will be deleted upon deleting the corresponding VLAN
ripGlobals	1.3.6.1.4.1.81.31.1.3
INT ripGlobalsLeakOSPFIntoRIP	1.3.6.1.4.1.81.31.1.3.2	INTEGER	read-write	Whenever to leak (redistribute) routes learned from OSPF protocol into the domain of the RIP protocol.
INT ripGlobalsLeakStaticIntoRIP	1.3.6.1.4.1.81.31.1.3.3	INTEGER	read-write	Whenever to leak (redistribute) routes learned from Static Route into the domain of the RIP protocol.
INT ripGlobalsRIPEnable	1.3.6.1.4.1.81.31.1.3.1	INTEGER	read-write	Whenever to activate the RIP protocol on the device. disable means don't activate RIP over all the IP interfaces enable means that the status of each interface is relevant
INT ripInterfaceAcceptDefaultRoute	1.3.6.1.4.1.81.31.1.4.1.4	INTEGER	read-write	Whether to accept the default route from receive RIP message.
IP ripInterfaceAddr	1.3.6.1.4.1.81.31.1.4.1.1	IpAddress	read-only	The IP address to which this entry's addressing information pertains.
ripInterfaceEntry	1.3.6.1.4.1.81.31.1.4.1		not-accessible	The information concerning one of this entity's IP interfaces. An IP interface is a logical connection to a certain IP net/subnet.
INT ripInterfaceMetric	1.3.6.1.4.1.81.31.1.4.1.2	INTEGER	read-write	This variable indicates the number of hops that is to be assign to that interface.
INT ripInterfaceSendDefaultRoute	1.3.6.1.4.1.81.31.1.4.1.5	INTEGER	read-write	Whether to send the default route in RIP message.
INT ripInterfaceSendMode	1.3.6.1.4.1.81.31.1.4.1.7	INTEGER	read-write	What the router sends on this interface. All - send the whole routing table according to the RIP version. DefaultOnly - send default route only. DoNotDend - don't send any RIP information on this interface.
INT ripInterfaceSplitHorizon	1.3.6.1.4.1.81.31.1.4.1.3	INTEGER	read-write	Whether to activate Poison Reverse algorithm, Split Horizon or none of them, on this interface
INT ripInterfaceState	1.3.6.1.4.1.81.31.1.4.1.6	INTEGER	read-only	The operational (current state) of the IP interface from RIP point of view. It depends on Global RIP status, IP interface status and rip interface STATUS. inactive - set by the device (status), the rip is not active on this interface. active - set by the device (status), rip is active on this interface.
ripInterfaceTable	1.3.6.1.4.1.81.31.1.4		not-accessible	This table is an extention of rip2IfConfTable, and is used to add/delete objects entries to/from that table.
INT ripInterfaceVersion	1.3.6.1.4.1.81.31.1.4.1.8	INTEGER	read-write	What RIP information the router sends on this interface.
routeGroupEntry	1.3.6.1.4.1.81.31.4.1.1		not-accessible
INT routeGroupId	1.3.6.1.4.1.81.31.4.1.1.1	INTEGER	read-only
routeGroupMgmt	1.3.6.1.4.1.81.31.4
INT routeGroupRouteMode	1.3.6.1.4.1.81.31.4.1.1.2	INTEGER	read-write	A bit mask representing the routing mode of the module: bit 0 - L2 switching bit 1 - EZ2Route bit 2 - Router bit 3 - Rich L2 bit 4 - WebSwitch (Load balance, application redirection). Currently, the following values for this bit mask are defined: secondLayer(1) - no routing. Behaves like P333T. ez2route (3) - no configuration is needed. Boosts external routers router (5) - Behaves like third layer switch. routerAndWebSwitch(21) - Perform routing and Load-Balancing or application redirection
routeGroupTable	1.3.6.1.4.1.81.31.4.1		not-accessible
vlBridgeEntry	1.3.6.1.4.1.81.31.3.2.1		not-accessible	A entry of this table specifies a Group of VLANs and VLANs belonging to it
INT vlBridgeGroupIndex	1.3.6.1.4.1.81.31.3.2.1.2	INTEGER	read-only	A logical number, corresponded this group of VLANs
INT vlBridgeIndex	1.3.6.1.4.1.81.31.3.2.1.3	INTEGER	read-only	A logical number, corresponded this VLAN. Each VLAN is allowed to participate in ONE group only
INT vlBridgeProtocol	1.3.6.1.4.1.81.31.3.2.1.1	INTEGER	read-only	The protocol, supported by this VLAN. The meanings of the values are: other: none of the following. This VLAN includes any protocol except the following protocols. It is a bridging VLAN. L2 relies on a third-party router to exchange traffic between nodes on different VLANs of this type. dec : This is a bridging VLAN, L2 relies on a third-party router to exchange traffic between nodes on different DEC VALNs of this type. netBios: This is a Bridging VLAN, L2 relies on a third-party router to exchange traffic between nodes on different NetBIOS VLAN of this type. appleTalk: This is a Bridging VLAN, L2 relies on a third-party router to exchange traffic between nodes on different appleTalk VLAN of this type. value of other(1) always exist
ROW vlBridgeStatus	1.3.6.1.4.1.81.31.3.2.1.4	RowStatus	read-write	It is used to create or delete an entry
vlBridgeTable	1.3.6.1.4.1.81.31.3.2		not-accessible	For each Bridge segment an entry of this table specifies a set of VLANs, which it contains.
STR vlConfAlias	1.3.6.1.4.1.81.31.3.1.1.2	DisplayString	read-write	This object is an 'alias' name for the lower-layer interface on top of which this IP interface is defined. The alias is specified by the network manager, and provides a non-volatile 'handle' for the lower-layer interface. The semantics of the object are similar to the semantics of the ifAlias object, defined by the Interfaces MIB. At the time when this Madge MIB object was defined, the latest release of the Interfaces MIB was draft-ietf-ifmib-mib-05.txt. The purpose is to support all methods (static or dynamic) for creation of interfaces and to allow creation of IP table entries without the need of the layer 2 interface to be present on the device at the time of the creation. It is assumed that some implementation dependent mechanisms allow the IP application to be informed about the creation of new lower layer interfaces.
vlConfEntry	1.3.6.1.4.1.81.31.3.1.1		not-accessible	The information concerning one of this entity's VLAN interfaces. An VLAN interface is a virtual connection to a switch.
INT vlConfIndex	1.3.6.1.4.1.81.31.3.1.1.1	INTEGER	read-only	A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
ROW vlConfStatus	1.3.6.1.4.1.81.31.3.1.1.3	RowStatus	read-write	For adding and deleting VLAN interfaces. Deleting this row means deleting the corresponding entry in ifTable (MIB II). Deleting a VLAN interface is allowed only if IP interface is not defined on this VLAN.
vlConfTable	1.3.6.1.4.1.81.31.3.1		not-accessible	This table is an extention of MIB II ifTable, and is used to add/delete entries to/from that table. In addition it contains private objects.

RFC description

Manages common routing features including IP interfaces, static routes, and VRRP on Avaya devices.

Start monitoring Layer 3 switch platform (vendor unclear, BOOTP/RIP) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CROUTE-MIB

What Is CROUTE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description