All MIBs › COSINE-ORION-MIB › csAtmInterfaceConfUniVersion
csAtmInterfaceConfUniVersion
Module: COSINE-ORION-MIB
OID (symbolic): COSINE-ORION-MIB::csAtmInterfaceConfUniVersion
OID (numeric): 1.3.6.1.4.1.3085.3.1.3.5.1.1.19
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: An indication of the latest version of the ATM Forum UNI Signalling Specification that is supported on this ATM Interface. if this value is not present, a version of the UNI earlier than 3.1 is supported.
If the peer IME's value of this object is the same as, or earlier than the local IME's value, then the version corresponding to the local IME's value should be attempted. Otherwise, if the peer IME's value of this object is earlier, and supported locally, then the local IME should attempt the version corresponding to the peer IME's value. Otherwise compatibility of the two IMEs cannot be assumed.
What is csAtmInterfaceConfUniVersion?
This enumerated value reports the latest ATM Forum UNI Signalling Specification version (2.0 through 4.0, or unsupported) supported on this interface, with a missing value implying a version earlier than 3.1, and negotiation logic comparing local and peer capabilities to settle on a common version. An admin uses this to diagnose signaling incompatibilities when SVC setup fails between devices from different vendors or eras. For example, an admin seeing csAtmInterfaceConfUniVersion read version3point1(3) on one side and version4point0(4) on the peer would know to check whether the older UNI version is limiting available signaling features.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3085.3.1.3.5.1.1.19 snmpwalk -v2c -c public <target> COSINE-ORION-MIB::csAtmInterfaceConfUniVersion
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3085.3.1.3.5.1.1.19.1 snmpget -v2c -c public <target> COSINE-ORION-MIB::csAtmInterfaceConfUniVersion.1
Start monitoring CoSine Communications IPNOS blade-based service platform with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the COSINE-ORION-MIB::csAtmInterfaceConfUniVersion OID value, configure state conditions and alerts, and monitor any CoSine Communications IPNOS blade-based service platform from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3085 | csRoot | COSINE-GLOBAL-REG |
| 1.3.6.1.4.1.3085.3 | csProduct | COSINE-GLOBAL-REG |
| 1.3.6.1.4.1.3085.3.1 | csOrionMIB | COSINE-GLOBAL-REG |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3085.3.1.3 | csOrionPortInfo | COSINE-ORION-MIB |
| 1.3.6.1.4.1.3085.3.1.3.5 | csAtmInfo | COSINE-ORION-MIB |
| 1.3.6.1.4.1.3085.3.1.3.5.1 | csAtmInterfaceConfTable | COSINE-ORION-MIB |
| 1.3.6.1.4.1.3085.3.1.3.5.1.1 | csAtmInterfaceConfEntry | COSINE-ORION-MIB |
| 1.3.6.1.4.1.3085.3.1.3.5.1.1.19 | csAtmInterfaceConfUniVersion | COSINE-ORION-MIB |