All MIBs › COSINE-ORION-MIB › csDs3ConfigLoopbackType
csDs3ConfigLoopbackType
Module: COSINE-ORION-MIB
OID (symbolic): COSINE-ORION-MIB::csDs3ConfigLoopbackType
OID (numeric): 1.3.6.1.4.1.3085.3.1.3.2.1.1.22
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object represents the desired loopback configuration of the DS3 interface.
The values mean: noLoop Not in the loopback state. A device that is not capable of performing a loopback on the interface shall always return this as its value. It is the default value.
payloadLoop The received signal at this interface is looped through the device. Typically the received signal is looped back for retransmission after it has passed through the device's framing function.
lineLoop The received signal at this interface does not go through the device (minimum penetration) but is looped back out.
otherLoop Loopbacks that are not defined here. Currently not used in the IPSX system.
inwardLoop The sent signal at this interface is looped back through the device.
dualLoop Both lineLoop and inwardLoop will be active simultaneously.
What is csDs3ConfigLoopbackType?
This read-write value specifies the desired local loopback configuration, such as none, payload, line, other, inward, or dual, for this DS3 interface. It lets a technician isolate whether a fault is in the local equipment or the transmission path by looping the signal back at different points. For example, to determine whether a reported error is upstream or local, a technician sets csDs3ConfigLoopbackType to inwardLoop and checks whether locally generated test traffic loops back cleanly.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3085.3.1.3.2.1.1.22 snmpwalk -v2c -c public <target> COSINE-ORION-MIB::csDs3ConfigLoopbackType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3085.3.1.3.2.1.1.22.1 snmpget -v2c -c public <target> COSINE-ORION-MIB::csDs3ConfigLoopbackType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3085.3.1.3.2.1.1.22.1 i <value>
Start monitoring CoSine Communications IPNOS blade-based service platform with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the COSINE-ORION-MIB::csDs3ConfigLoopbackType OID value, configure state conditions and alerts, and monitor any CoSine Communications IPNOS blade-based service platform from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3085 | csRoot | COSINE-GLOBAL-REG |
| 1.3.6.1.4.1.3085.3 | csProduct | COSINE-GLOBAL-REG |
| 1.3.6.1.4.1.3085.3.1 | csOrionMIB | COSINE-GLOBAL-REG |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3085.3.1.3 | csOrionPortInfo | COSINE-ORION-MIB |
| 1.3.6.1.4.1.3085.3.1.3.2 | csOrionDs3Info | COSINE-ORION-MIB |
| 1.3.6.1.4.1.3085.3.1.3.2.1 | csDs3ConfigTable | COSINE-ORION-MIB |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1 | csDs3ConfigEntry | COSINE-ORION-MIB |
| 1.3.6.1.4.1.3085.3.1.3.2.1.1.22 | csDs3ConfigLoopbackType | COSINE-ORION-MIB |