343 modules from Juniper
Juniper's MIBs in this database span core and edge routers, NetScreen (ScreenOS) firewalls, SRX security gateways, WX WAN-optimization appliances, and mobile-carrier packet gateways, with a large legacy family of Juniper-* modules built for the E-series (ERX/E120/E320) broadband edge platform. Recurring subjects include IPsec VPN and IKE key management, security-zone and flow-gate resource limits on SRX logical systems, routing-protocol state (BGP, OSPF, IS-IS, DVMRP), PPPoE and DHCP subscriber sessions, optical transceiver diagnostics, and chassis power-supply health. If you manage Juniper routers, firewalls, or E-series broadband edge equipment, come here for the vendor-specific security-policy and protocol-conformance MIBs that sit alongside the standard IETF ones. Because this vendor's set spans distinct product families acquired or built over time, from ScreenOS-era NetScreen MIBs to modern JNX-prefixed modules, match the exact MIB to your platform generation (JunOS vs. JunOSe vs. ScreenOS) rather than assuming a shared object model.
| Module | Description |
|---|---|
| JNX-GDOI-MIB | Defines managed objects for Group Domain of Interpretation (GDOI) on Juniper Networks devices, supporting group key management for IPsec VPN. |
| JNX-IPSEC-MONITOR-MIB | Provides monitoring objects for IPsec security associations and tunnel statistics on Juniper Networks devices. |
| JNX-L2TP-MIB | Defines managed objects for Layer 2 Tunneling Protocol (L2TP) sessions and tunnels on Juniper Networks devices. |
| JNX-PPP-MIB | Defines managed objects for Point-to-Point Protocol (PPP) sessions and link control on Juniper Networks devices. |
| JNX-PPPOE-MIB | Provides management objects for PPP over Ethernet (PPPoE) sessions and access concentrator functions on Juniper Networks devices. |
| Juniper-AAA-MIB | Defines managed objects for Authentication, Authorization, and Accounting (AAA) on Juniper Networks ERX/E-series broadband routers. |
| Juniper-AAA-Server-CONF | Provides conformance and compliance definitions for AAA server management on Juniper Networks E-series platforms. |
| Juniper-ACCOUNTING-MIB | Defines managed objects for accounting data collection and export on Juniper Networks E-series routers, including session and traffic records. |
| Juniper-ADDRESS-POOL-MIB | Provides management objects for IP address pool allocation and utilization tracking on Juniper Networks E-series broadband access routers. |
| Juniper-Agents | Defines the SNMP agent registration and capability information for Juniper Networks E-series router platforms. |
| JUNIPER-ALARM-EXT-MIB | Provides extended alarm notification and management objects for Juniper Networks devices, supplementing the base alarm MIB. |
| JUNIPER-ALARM-MIB | Defines managed objects for alarm management on Juniper Networks devices, including active alarm tables and severity-based notifications. |
| JUNIPER-ANALYZER-MIB | Provides management objects for packet analyzer and port mirroring configuration on Juniper Networks EX and QFX switches. |
| Juniper-ATM-1483-Profile-CONF | Defines conformance statements for RFC 1483 ATM encapsulation profile management on Juniper Networks E-series platforms. |
| Juniper-ATM-1483-Profile-MIB | Provides managed objects for configuring and monitoring RFC 1483 ATM bridged and routed encapsulation profiles on Juniper E-series routers. |
| Juniper-ATM-CONF | Defines conformance and compliance statements for ATM interface management on Juniper Networks E-series broadband routers. |
| JUNIPER-ATM-COS-MIB | Provides management objects for ATM Class of Service (CoS) configuration and statistics on Juniper Networks devices. |
| JUNIPER-ATM-MIB | Defines managed objects for ATM interface monitoring and control on Juniper Networks routers, including virtual circuits and traffic parameters. |
| Juniper-Autoconfigure-CONF | Provides conformance definitions for autoconfiguration management on Juniper Networks E-series platforms. |
| Juniper-AUTOCONFIGURE-MIB | Defines managed objects for automatic subscriber interface configuration on Juniper Networks E-series broadband access routers. |
| Juniper-BGP-CONF | Conformance and compliance statements covering management of the BGP routing protocol on Juniper Networks E-series routers. |
| Juniper-BGP-MIB | Provides managed objects for Border Gateway Protocol (BGP) peer sessions, route statistics, and policy application on Juniper E-series platforms. |
| Juniper-Bridge-CONF | Defines conformance statements for bridge and spanning tree management on Juniper Networks E-series platforms. |
| Juniper-BRIDGE-ETHERNET-MIB | Provides managed objects for bridged Ethernet interface monitoring and 802.1D spanning tree on Juniper Networks E-series routers. |
| Juniper-BRIDGE-MIB | Defines managed objects for IEEE 802.1D bridge functionality monitoring on Juniper Networks E-series platforms. |
| Juniper-Bridged-Ethernet-CONF | Provides conformance definitions for bridged Ethernet interface management on Juniper Networks E-series routers. |
| Juniper-Bridging-Manager-CONF | Defines conformance statements for the bridging manager functionality on Juniper Networks E-series platforms. |
| Juniper-Bridging-Manager-MIB | Provides managed objects for the bridging manager controlling L2 forwarding and VLAN operations on Juniper E-series routers. |
| Juniper-CBF-CONF | Defines conformance statements for Class-Based Forwarding (CBF) management on Juniper Networks E-series routers. |
| Juniper-CBF-MIB | Provides managed objects for Class-Based Forwarding (CBF) policy configuration and statistics on Juniper Networks E-series broadband routers. |
| JUNIPER-CFGMGMT-MIB | Defines managed objects for configuration management on Juniper Networks devices, including configuration change tracking and commit history. |
| JUNIPER-CHASSIS-CLUSTER-MIB | Provides management objects for chassis clustering (high availability) on Juniper Networks SRX firewalls, including redundancy group and node status. |
| JUNIPER-CHASSIS-DEFINES-MIB | JUNIPER-CHASSIS-DEFINES-MIB module |
| JUNIPER-CHASSIS-FWDD-MIB | Defines managed objects for Forwarding Daemon (fwdd) chassis components on Juniper Networks devices, monitoring forwarding plane health. |
| Juniper-CLI-CONF | Defines conformance statements for CLI management objects on Juniper Networks E-series platforms. |
| Juniper-CLI-MIB | Provides managed objects for monitoring and managing CLI sessions and access on Juniper Networks E-series routers. |
| JUNIPER-COLLECTOR-MIB | Defines managed objects for the Juniper Networks traffic and statistics collector service, supporting data export to external analysis systems. |
| Juniper-COPS-CONF | Defines conformance statements for COPS (Common Open Policy Service) protocol management on Juniper Networks E-series platforms. |
| Juniper-COPS-MIB | Provides managed objects for COPS protocol sessions and policy management on Juniper Networks E-series broadband routers. |
| JUNIPER-COS-MIB | Defines managed objects for Class of Service (CoS) configuration, queuing, and scheduling statistics on Juniper Networks routers and switches. |
| JUNIPER-DCU-MIB | Provides management objects for Destination Class Usage (DCU) accounting and traffic classification on Juniper Networks routing platforms. |
| JUNIPER-DFC-MIB | Defines managed objects for Dynamic Flow Capture (DFC) on Juniper Networks devices, supporting selective packet capture and traffic mirroring. |
| Juniper-DHCP-CONF | Defines conformance statements for DHCP server and relay management on Juniper Networks E-series platforms. |
| Juniper-DHCP-MIB | Provides managed objects for DHCP server pool management, lease tracking, and relay statistics on Juniper Networks E-series broadband routers. |
| Juniper-DHCPv6-CONF | Defines conformance statements for DHCPv6 management on Juniper Networks E-series platforms. |
| Juniper-DHCPv6-MIB | Provides managed objects for DHCPv6 server address assignment and prefix delegation on Juniper Networks E-series broadband routers. |
| Juniper-DISMAN-EVENT-MIB | Defines managed objects for Distributed Management (DISMAN) event scripting on Juniper Networks E-series platforms. |
| Juniper-DNS-CONF | Defines conformance statements for DNS proxy and resolution management on Juniper Networks E-series platforms. |
| Juniper-DNS-MIB | Provides managed objects for DNS proxy configuration and query statistics on Juniper Networks E-series broadband access routers. |
| Juniper-Dos-Protection-CONF | Defines conformance statements for Denial-of-Service (DoS) protection management on Juniper Networks E-series platforms. |
| Juniper-DOS-PROTECTION-MIB | Provides managed objects for DoS attack detection, filtering, and mitigation statistics on Juniper Networks E-series routers. |
| Juniper-Dos-Protection-Platform-CONF | Defines conformance statements for platform-specific DoS protection features on Juniper Networks E-series routers. |
| Juniper-DOS-PROTECTION-PLATFORM-MIB | Provides platform-specific managed objects for hardware-accelerated DoS protection on Juniper Networks E-series router platforms. |
| Juniper-DS1-CONF | Defines conformance statements for DS1 (T1) interface management on Juniper Networks E-series platforms. |
| Juniper-DS1-MIB | Provides managed objects for DS1/T1 interface performance monitoring and configuration on Juniper Networks E-series WAN routers. |
| Juniper-DS3-CONF | Defines conformance statements for DS3 (T3) interface management on Juniper Networks E-series platforms. |
| Juniper-DS3-MIB | Provides managed objects for DS3/T3 interface performance monitoring and configuration on Juniper Networks E-series WAN routers. |
| Juniper-DVMRP-CONF | Defines conformance statements for DVMRP multicast routing management on Juniper Networks E-series platforms. |
| Juniper-DVMRP-MIB | Provides managed objects for Distance Vector Multicast Routing Protocol (DVMRP) on Juniper Networks E-series routers. |
| Juniper-E2-Registry | Defines the OID registration subtree for Juniper Networks E2-series router platform MIB modules. |
| Juniper-Entity-CONF | Provides conformance statements for entity (hardware component) management on Juniper Networks E-series platforms. |
| Juniper-ERX-Registry | Defines the OID registration subtree and platform identifiers for Juniper Networks ERX-series broadband routers. |
| Juniper-ERX-System-CONF | Defines conformance statements for system-level management on Juniper Networks ERX-series broadband routers. |
| Juniper-ERX-System-MIB | Provides managed objects for system status, resource utilization, and operational monitoring of Juniper Networks ERX-series broadband routers. |
| Juniper-ES2-Registry | Defines the OID registration subtree and platform identifiers for Juniper Networks ES2-series router platforms. |
| Juniper-Ethernet-CONF | Defines conformance statements for Ethernet interface management on Juniper Networks E-series platforms. |
| Juniper-ETHERNET-MIB | Provides managed objects for Ethernet interface statistics, configuration, and status monitoring on Juniper Networks E-series routers. |
| Juniper-Event-Manager-CONF | Defines conformance statements for the event manager and event scripting functionality on Juniper Networks E-series platforms. |
| JUNIPER-EVENT-MIB | Provides managed objects for event logging and notification management on Juniper Networks routing and switching platforms. |
| JUNIPER-EX-MAC-NOTIFICATION-MIB | Defines MAC address change notification objects for Juniper Networks EX-series Ethernet switches. |
| Juniper-Experiment | Defines the experimental OID subtree for pre-standard and prototype MIB modules on Juniper Networks E-series platforms. |
| JUNIPER-EXPERIMENT-MIB | Provides experimental management objects for testing and prototyping new features on Juniper Networks routing platforms. |
| JUNIPER-FABRIC-CHASSIS | Defines managed objects for fabric chassis monitoring in Juniper Networks QFabric and multi-chassis systems. |
| Juniper-File-Transfer-CONF | Defines conformance statements for file transfer management on Juniper Networks E-series platforms. |
| Juniper-FILE-XFER-MIB | Provides managed objects for file transfer operations (FTP, TFTP) and software upload/download on Juniper Networks E-series routers. |
| JUNIPER-FIREWALL-MIB | Defines managed objects for firewall filter statistics, policer counters, and security policy monitoring on Juniper Networks routing platforms. |
| Juniper-Fractional-T1-CONF | Defines conformance statements for fractional T1 (FT1) interface management on Juniper Networks E-series platforms. |
| Juniper-FRACTIONAL-T1-MIB | Provides managed objects for fractional T1 WAN interface configuration and performance monitoring on Juniper Networks E-series routers. |
| Juniper-Frame-Relay-CONF | Defines conformance statements for Frame Relay interface management on Juniper Networks E-series platforms. |
| Juniper-FRAME-RELAY-MIB | Provides managed objects for Frame Relay PVC monitoring, traffic statistics, and LMI status on Juniper Networks E-series routers. |
| JUNIPER-FRU-MIB | Defines managed objects for Field Replaceable Unit (FRU) monitoring on Juniper Networks devices, including status, type, and operational state. |
| Juniper-Ha-Redundancy-CONF | Defines conformance statements for high availability and redundancy management on Juniper Networks E-series platforms. |
| Juniper-HDLC-CONF | Defines conformance statements for HDLC (High-Level Data Link Control) interface management on Juniper Networks E-series platforms. |
| Juniper-HDLC-MIB | Provides managed objects for HDLC WAN interface configuration and statistics on Juniper Networks E-series routers. |
| Juniper-HOST-MIB | Defines managed objects for host configuration, addressing, and routing policy on Juniper Networks E-series broadband routers. |
| JUNIPER-HOSTRESOURCES-MIB | Provides managed objects for host resource monitoring (CPU, memory, storage, processes) on Juniper Networks routing platforms. |
| Juniper-HTTP-MIB | Defines managed objects for HTTP proxy and service configuration on Juniper Networks E-series broadband routers. |
| Juniper-HTTP-Profile-MIB | Provides managed objects for HTTP access profile configuration applied to subscriber sessions on Juniper Networks E-series routers. |
| JUNIPER-IDP-MIB | Defines managed objects for Intrusion Detection and Prevention (IDP) policy statistics and attack monitoring on Juniper Networks SRX devices. |
| JUNIPER-IF-ACCOUNTING-MIB | Provides managed objects for per-interface traffic accounting and statistics collection on Juniper Networks routing platforms. |
| JUNIPER-IF-MIB | Defines extended interface managed objects for Juniper Networks devices, supplementing the standard IF-MIB with vendor-specific attributes. |
| JUNIPER-IFOPTICS-MIB | Provides managed objects for optical transceiver monitoring on Juniper Networks interfaces, including power levels, temperature, and diagnostics. |
| JUNIPER-IFOTN-MIB | Defines managed objects for Optical Transport Network (OTN) interface monitoring on Juniper Networks devices. |
| Juniper-IGMP-CONF | Defines conformance statements for IGMP multicast group management on Juniper Networks E-series platforms. |
| Juniper-IGMP-MIB | Provides managed objects for Internet Group Management Protocol (IGMP) snooping and proxy statistics on Juniper Networks E-series routers. |
| Juniper-IKE-CONF | Defines conformance statements for IKE (Internet Key Exchange) VPN key management on Juniper Networks E-series platforms. |
| Juniper-IKE-MIB | Provides managed objects for IKE negotiation statistics, SA (Security Association) status, and policy on Juniper Networks E-series VPN routers. |
| Juniper-Interfaces-CONF | Defines conformance statements for network interface management on Juniper Networks E-series platforms. |
| Juniper-Internet-CONF | Juniper-Internet-CONF module |
| Juniper-IP-MIB | Provides managed objects for IPv4 routing, addressing, and forwarding statistics on Juniper Networks E-series broadband routers. |
| Juniper-IP-Policy-CONF | Defines conformance statements for IP routing policy management on Juniper Networks E-series platforms. |
| Juniper-IP-POLICY-MIB | Provides managed objects for IP route policy configuration, filter lists, and policy statistics on Juniper Networks E-series routers. |
| Juniper-IP-Profile-CONF | Defines conformance statements for IP subscriber profile management on Juniper Networks E-series platforms. |
| Juniper-IP-PROFILE-MIB | Provides managed objects for IP service profiles applied to broadband subscriber sessions on Juniper Networks E-series routers. |
| Juniper-IP-Tunnel-CONF | Defines conformance statements for IP tunnel interface management on Juniper Networks E-series platforms. |
| Juniper-IP-TUNNEL-MIB | Provides managed objects for GRE and IP-IP tunnel interface configuration and statistics on Juniper Networks E-series routers. |
| JUNIPER-IPFORWARD-MIB | Defines managed objects for IP unicast and multicast forwarding table management on Juniper Networks routing platforms. |
| JUNIPER-IPSEC-FLOW-MON-MIB | Provides managed objects for IPsec tunnel flow monitoring, including SA statistics, packet counts, and error tracking on Juniper Networks devices. |
| Juniper-IPsec-Tunnel-CONF | Defines conformance statements for IPsec VPN tunnel management on Juniper Networks E-series platforms. |
| Juniper-IPsec-Tunnel-MIB | Provides managed objects for IPsec VPN tunnel configuration, status, and traffic statistics on Juniper Networks E-series routers. |
| JUNIPER-IPv4-MIB | Defines IPv4-specific managed objects for address management, fragmentation statistics, and routing on Juniper Networks platforms. |
| JUNIPER-IPv6-MIB | Provides IPv6 managed objects for address assignment, neighbor discovery, and routing statistics on Juniper Networks routing platforms. |
| Juniper-IPv6-Profile-CONF | Defines conformance statements for IPv6 subscriber profile management on Juniper Networks E-series platforms. |
| Juniper-IPV6-PROFILE-MIB | Provides managed objects for IPv6 service profiles applied to broadband subscriber sessions on Juniper Networks E-series routers. |
| Juniper-IS-IS-CONF | Defines conformance statements for IS-IS routing protocol management on Juniper Networks E-series platforms. |
| Juniper-ISIS-MIB | Provides managed objects for IS-IS (Intermediate System to Intermediate System) routing protocol adjacencies and statistics on Juniper E-series routers. |
| JUNIPER-IVE-MIB | Defines managed objects for the Juniper Networks Infranet/IVE (Instant Virtual Extranet) SSL VPN gateway, monitoring user sessions and system health. |
| JUNIPER-JDHCP-MIB | Provides managed objects for the Juniper Networks JDHCP local DHCP server, supporting pool allocation and lease management. |
| JUNIPER-JDHCPV6-MIB | Defines managed objects for the Juniper Networks local DHCPv6 server, supporting IPv6 prefix delegation and address assignment. |
| JUNIPER-JS-AUTH-MIB | Provides managed objects for authentication firewall and access control on Juniper Networks SRX and J-series security devices. |
| JUNIPER-JS-CERT-MIB | Defines managed objects for digital certificate management on Juniper Networks SRX and J-series security devices. |
| JUNIPER-JS-DNS-MIB | Provides managed objects for DNS proxy and resolution service monitoring on Juniper Networks SRX and J-series security appliances. |
| JUNIPER-JS-IDP-MIB | Defines managed objects for IDP (Intrusion Detection and Prevention) statistics on Juniper Networks SRX and Junos security platforms. |
| JUNIPER-JS-IF-EXT-MIB | Provides extended interface managed objects specific to Juniper Networks SRX and J-series security appliances. |
| JUNIPER-JS-IPSEC-VPN-MIB | Managed objects covering IPsec VPN configuration, tunnel status, and statistics for Juniper Networks SRX security devices. |
| JUNIPER-JS-NAT-MIB | Provides managed objects for Network Address Translation (NAT) sessions, pools, and rule statistics on Juniper Networks SRX security devices. |
| JUNIPER-JS-PACKET-MIRROR-MIB | Defines managed objects for packet mirroring and lawful intercept configuration on Juniper Networks SRX and J-series security devices. |
| JUNIPER-JS-POLICY-MIB | Provides managed objects for security policy configuration, hit counts, and rule statistics on Juniper Networks SRX and J-series appliances. |
| JUNIPER-JS-SCREENING-MIB | Defines managed objects for screen (DoS/DDoS attack screening) statistics on Juniper Networks SRX and J-series security devices. |
| JUNIPER-JS-UTM-AV-MIB | Provides managed objects for Unified Threat Management (UTM) antivirus scanning statistics on Juniper Networks SRX security devices. |
| JUNIPER-JVAE-INFRA-MIB | Defines managed objects for Juniper Virtual Application Engine (JVAE) infrastructure monitoring, supporting virtual machine resource tracking. |
| JUNIPER-JVAE-NODE-MIB | Provides managed objects for individual node monitoring within the Juniper Virtual Application Engine (JVAE) cluster. |
| JUNIPER-L2ALD-MIB | Defines managed objects for Layer 2 Address Learning Daemon (L2ALD) operations on Juniper Networks EX switches, including MAC table statistics. |
| JUNIPER-L2CP-FEATURES-MIB | Provides managed objects for Layer 2 Control Protocol (L2CP) feature configuration and PDU tunneling on Juniper Networks devices. |
| Juniper-L2TP-CONF | Defines conformance statements for L2TP tunnel and session management on Juniper Networks E-series platforms. |
| Juniper-L2TP-Dialout-Generator-CONF | Provides conformance definitions for L2TP dialout call generation management on Juniper Networks E-series platforms. |
| Juniper-L2TP-Dialout-MIB | Defines managed objects for L2TP dialout call generation and session management on Juniper Networks E-series broadband routers. |
| Juniper-L2TP-MIB | Provides managed objects for L2TP tunnel status, session counts, and statistics on Juniper Networks E-series broadband access routers. |
| JUNIPER-LDP-MIB | Defines managed objects for Label Distribution Protocol (LDP) sessions, LSPs, and label bindings on Juniper Networks MPLS platforms. |
| Juniper-License-Mgr-CONF | Defines conformance statements for license management on Juniper Networks E-series platforms. |
| JUNIPER-LICENSE-MIB | Provides managed objects for software license key management and feature entitlement tracking on Juniper Networks devices. |
| Juniper-Local-Address-Server-CONF | Defines conformance statements for local address server management on Juniper Networks E-series platforms. |
| Juniper-Log-CONF | Defines conformance statements for system log management on Juniper Networks E-series platforms. |
| Juniper-LOG-MIB | Provides managed objects for system log (syslog) configuration, filtering, and message statistics on Juniper Networks E-series routers. |
| JUNIPER-LSYSSP-CPU-MIB | Provides managed objects for CPU resource limits and utilization per logical system security profile on Juniper Networks SRX devices. |
| JUNIPER-LSYSSP-FLOWGATE-MIB | Defines managed objects for flow gate (pinhole) resource limits per logical system security profile on Juniper Networks SRX devices. |
| JUNIPER-LSYSSP-FLOWSESS-MIB | Provides managed objects for flow session resource limits and usage per logical system security profile on Juniper Networks SRX devices. |
| JUNIPER-LSYSSP-NATCONEBIND-MIB | Defines managed objects for NAT cone binding resource limits per logical system security profile on Juniper Networks SRX devices. |
| JUNIPER-LSYSSP-NATDSTPOOL-MIB | Provides managed objects for NAT destination pool resource limits per logical system security profile on Juniper Networks SRX devices. |
| JUNIPER-LSYSSP-NATDSTRULE-MIB | Defines managed objects for NAT destination rule resource limits per logical system security profile on Juniper Networks SRX devices. |
| JUNIPER-LSYSSP-NATPOIPNUM-MIB | Provides managed objects for NAT persistent over IP number resource allocation per logical system security profile on Juniper Networks SRX devices. |
| JUNIPER-LSYSSP-NATSRCNOPATAD-MIB | Defines managed objects for NAT source no-PAT address resource limits per logical system security profile on Juniper Networks SRX devices. |
| JUNIPER-LSYSSP-NATSRCPATAD-MIB | Provides managed objects for NAT source PAT address resource limits per logical system security profile on Juniper Networks SRX devices. |
| JUNIPER-LSYSSP-NATSRCPOOL-MIB | Defines managed objects for NAT source pool resource limits per logical system security profile on Juniper Networks SRX devices. |
| JUNIPER-LSYSSP-NATSRCRULE-MIB | Provides managed objects for NAT source rule resource limits per logical system security profile on Juniper Networks SRX devices. |
| JUNIPER-LSYSSP-NATSTATICRULE-MIB | Defines managed objects for NAT static rule resource limits per logical system security profile on Juniper Networks SRX devices. |
| JUNIPER-LSYSSP-POLICY-MIB | Provides managed objects for security policy resource limits per logical system security profile on Juniper Networks SRX devices. |
| JUNIPER-LSYSSP-POLICYWCNT-MIB | Defines managed objects for security policy with counter resource limits per logical system security profile on Juniper Networks SRX devices. |
| JUNIPER-LSYSSP-SCHEDULER-MIB | Provides managed objects for scheduler resource limits per logical system security profile on Juniper Networks SRX devices. |
| JUNIPER-LSYSSP-ZONE-MIB | Defines managed objects for security zone resource limits per logical system security profile on Juniper Networks SRX devices. |
| JUNIPER-LSYSSPAUTHENTRY-MIB | Managed objects covering per-logical-system security profile limits on authentication entry resources for Juniper Networks SRX devices. |
| JUNIPER-MAC-MIB | Defines managed objects for MAC address table management and statistics on Juniper Networks EX-series Ethernet switches. |
| JUNIPER-MAG-MIB | Provides managed objects for the Juniper Networks Mobility Access Gateway (MAG), monitoring SSL VPN and unified access service statistics. |
| JUNIPER-MIB IPNM ✓ | Juniper Networks enterprise MIB providing hardware chassis information, system inventory, and device identification for Junos OS-based routers and switches. |
| Juniper-MIBs | Root SMI module defining the top-level OID registration tree and enterprise structure for all Juniper Networks E-series MIB modules. |
| JUNIPER-MIMSTP-MIB | Defines managed objects for Multiple Instance Multiple Spanning Tree Protocol (MIMSTP) on Juniper Networks EX-series switches. |
| JUNIPER-MOBILE-GATEWAY-AAA-MIB | Provides managed objects for AAA (Authentication, Authorization, and Accounting) on Juniper Networks Mobile Gateway platforms supporting LTE/4G. |
| JUNIPER-MOBILE-GATEWAY-DHCP-MIB | Defines managed objects for DHCP address assignment and pool management on Juniper Networks Mobile Gateway platforms. |
| JUNIPER-MOBILE-GATEWAY-EXAMPLE-MIB | Provides example managed objects for the Juniper Networks Mobile Gateway platform, serving as a template for custom MIB development. |
| JUNIPER-MOBILE-GATEWAY-RMPS-MIB | Provides managed objects for Resource Management and Policy System (RMPS) on Juniper Networks Mobile Gateway platforms. |
| JUNIPER-MOBILE-GATEWAY-SGW-SM-MIB | Provides managed objects for the Serving Gateway (SGW) Session Manager on Juniper Networks Mobile Gateway LTE platforms. |
| JUNIPER-MOBILE-GATEWAY-SM-IP-POOL-MIB | Defines managed objects for Session Manager IP pool allocation and utilization on Juniper Networks Mobile Gateway platforms. |
| JUNIPER-MOBILE-GATEWAYS | Juniper Networks MIB defining OID registration and top-level structure for Juniper mobile gateway product line. |
| JUNIPER-MOBILE-GW-SGW-MFWD-MIB | Juniper Networks MIB for monitoring mobile forwarding plane statistics on Serving Gateway (SGW) within the mobile gateway architecture. |
| JUNIPER-MOBILITY-CHARGING-MIB | Juniper Networks MIB providing charging statistics and data records management for mobile subscriber sessions on Juniper mobile gateways. |
| JUNIPER-MOBILITY-SGW-CHARGING-MIB | Juniper Networks MIB for monitoring Serving Gateway charging plane data and session accounting on mobile broadband networks. |
| Juniper-MPLS-CONF | Juniper Networks conformance and compliance definitions MIB for MPLS protocol management on Juniper ERX/E-series edge routers. |
| JUNIPER-MPLS-LDP-MIB | Juniper Networks MIB for managing MPLS Label Distribution Protocol (LDP) sessions and label bindings on Juniper devices. |
| Juniper-MPLS-MIB | Juniper Networks MIB for managing and monitoring MPLS label-switched paths and forwarding information on Juniper E-series routers. |
| Juniper-MROUTER-MIB | Juniper Networks MIB for monitoring IP multicast routing tables and multicast protocol state on Juniper E-series edge routers. |
| Juniper-Multicast-Router-CONF | Juniper Networks conformance statements MIB for multicast routing protocol management on Juniper E-series platforms. |
| JUNIPER-NAT-MIB | Juniper Networks MIB for monitoring Network Address Translation (NAT) session statistics and pool utilization on Juniper devices. |
| Juniper-Notification-Log-CONF | Juniper Networks conformance definitions for the notification log MIB on Juniper E-series edge routers. |
| Juniper-NS-Lookup-CONF | Juniper Networks conformance statements for DNS name server lookup functionality on Juniper E-series routers. |
| JUNIPER-NSM-TRAPS | Juniper Networks Security Manager (NSM) MIB defining SNMP traps and notifications for network security management events. |
| Juniper-OSPF-CONF | Juniper Networks OSPF protocol conformance and compliance statements MIB for Juniper E-series edge routers. |
| Juniper-OSPF-MIB | Juniper Networks MIB extending OSPF protocol management objects for Juniper E-series routers including area and neighbor state. |
| JUNIPER-OTN-MIB | Juniper Networks MIB for monitoring Optical Transport Network (OTN) interface performance and alarm status on Juniper platforms. |
| Juniper-Packet-Mirror-CONF | Juniper Networks conformance definitions for packet mirroring (port mirroring/traffic analysis) on Juniper E-series routers. |
| Juniper-PACKET-MIRROR-MIB | Juniper Networks MIB for configuring and monitoring packet mirroring sessions used for traffic capture on Juniper E-series platforms. |
| JUNIPER-PAE-EXTENSION-MIB | Juniper Networks MIB extending IEEE 802.1X Port Access Entity (PAE) management objects for Juniper-specific authentication features. |
| JUNIPER-PFE-MIB | Juniper Networks MIB for monitoring Packet Forwarding Engine (PFE) statistics, errors, and utilization on Juniper routing platforms. |
| Juniper-PIM-CONF | Juniper Networks conformance statements for Protocol Independent Multicast (PIM) management on Juniper E-series edge routers. |
| Juniper-PIM-MIB | MIB from Juniper Networks for managing Protocol Independent Multicast (PIM) interfaces, neighbor relationships, and routing state on E-series routers. |
| Juniper-Ping-CONF | Juniper Networks conformance definitions for ICMP ping test management on Juniper E-series routers. |
| JUNIPER-PING-MIB | Juniper Networks MIB for configuring and executing ICMP ping connectivity tests and reporting results on Juniper platforms. |
| JUNIPER-PMON-MIB | Juniper Networks MIB for passive monitoring (PMON) interface traffic statistics sampling on Juniper routing platforms. |
| Juniper-Policy-Manager-CONF | Juniper Networks conformance statements for the policy management framework on Juniper E-series edge routers. |
| Juniper-POLICY-MIB | MIB from Juniper Networks for managing routing policy filters along with their match conditions and actions on E-series routers. |
| JUNIPER-POWER-SUPPLY-UNIT-MIB | Juniper Networks MIB for monitoring power supply unit (PSU) status, redundancy, and fault conditions on Juniper chassis. |
| Juniper-PPP-CONF | Juniper Networks conformance statements for Point-to-Point Protocol (PPP) management on Juniper E-series edge routers. |
| Juniper-PPP-MIB | MIB from Juniper Networks covering PPP link parameters, authentication, and connection statistics management on E-series routers. |
| Juniper-PPP-Profile-CONF | Juniper Networks conformance definitions for PPP subscriber profile management on Juniper E-series edge routers. |
| Juniper-PPP-PROFILE-MIB | MIB from Juniper Networks for configuring and managing PPP subscriber connection profiles on its E-series broadband platforms. |
| Juniper-PPPoE-CONF | Juniper Networks conformance statements for PPPoE (PPP over Ethernet) management on Juniper E-series edge routers. |
| Juniper-PPPOE-MIB | Juniper Networks MIB for monitoring PPPoE session statistics and subscriber connections on Juniper E-series broadband edge routers. |
| Juniper-PPPoE-Profile-CONF | Juniper Networks conformance definitions for PPPoE subscriber profile management on Juniper E-series edge routers. |
| Juniper-PPPOE-PROFILE-MIB | Juniper Networks MIB for configuring PPPoE subscriber service profiles on Juniper E-series broadband aggregation platforms. |
| Juniper-Products-MIB | Juniper Networks MIB defining OID registrations and product identifiers for the Juniper E-series (ERX) router product line. |
| Juniper-Profile-CONF | Juniper Networks conformance statements for the subscriber profile management framework on Juniper E-series routers. |
| Juniper-PROFILE-MIB | Juniper Networks MIB for managing generic subscriber service profiles used for access policy on Juniper E-series platforms. |
| Juniper-QoS-Manager-CONF | Juniper Networks conformance statements for Quality of Service (QoS) policy management on Juniper E-series edge routers. |
| Juniper-QoS-MIB | Juniper Networks MIB for managing and monitoring QoS policies, queues, and traffic shaping parameters on Juniper E-series routers. |
| Juniper-RADIUS-CLIENT-CONF | Juniper Networks conformance statements for RADIUS client management on Juniper E-series broadband edge routers. |
| Juniper-RADIUS-CLIENT-MIB | Juniper Networks MIB for managing RADIUS authentication and accounting client configuration on Juniper E-series routers. |
| Juniper-RADIUS-Disconnect-CONF | Juniper Networks conformance definitions for RADIUS disconnect message handling on Juniper E-series edge routers. |
| Juniper-RADIUS-Disconnect-MIB | Juniper Networks MIB for monitoring RADIUS disconnect (CoA) message processing for subscriber session termination. |
| Juniper-RADIUS-Initiated-Request-MIB | Juniper Networks MIB for handling RADIUS-initiated change-of-authorization and disconnect requests from RADIUS servers. |
| Juniper-RADIUS-Proxy-CONF | Juniper Networks conformance statements for RADIUS proxy functionality on Juniper E-series edge routers. |
| Juniper-RADIUS-Proxy-MIB | Juniper Networks MIB for monitoring RADIUS proxy server operations and request forwarding on Juniper E-series platforms. |
| Juniper-REDUNDANCY-MIB | MIB from Juniper Networks for tracking the redundancy and failover state of routing engines and interface modules on E-series equipment. |
| Juniper-Registry | Juniper Networks MIB defining the top-level OID registry and namespace structure for Juniper E-series MIB modules. |
| Juniper-RIP-CONF | Juniper Networks conformance statements for Routing Information Protocol (RIP) management on Juniper E-series edge routers. |
| JUNIPER-RMON-MIB | Juniper Networks MIB extending standard RMON with Juniper-specific remote network monitoring capabilities on Juniper platforms. |
| Juniper-Router-CONF | Juniper Networks conformance statements for the virtual router management framework on Juniper E-series edge routers. |
| Juniper-ROUTER-MIB | Juniper Networks MIB for managing virtual router instances, routing contexts, and associated interfaces on Juniper E-series platforms. |
| JUNIPER-RPF-MIB | Juniper Networks MIB for monitoring Reverse Path Forwarding (RPF) check statistics used in multicast and unicast routing on Juniper devices. |
| JUNIPER-RPM-MIB | Juniper Networks MIB for Real-time Performance Monitoring (RPM) probe configuration and results on Juniper routing platforms. |
| JUNIPER-RPS-MIB | Juniper Networks MIB for monitoring Redundant Power System (RPS) status on Juniper EX series switches. |
| JUNIPER-RSVP-MIB | Juniper Networks MIB for managing Resource Reservation Protocol (RSVP) sessions and path states on Juniper MPLS networks. |
| JUNIPER-RTM-MIB | Juniper Networks MIB for Real-Time Monitor (RTM) providing routing table statistics and forwarding information on Juniper platforms. |
| JUNIPER-SCU-MIB | Juniper Networks MIB for monitoring Source Class Usage (SCU) statistics for traffic classification accounting on Juniper routers. |
| JUNIPER-SECURE-ACCESS-PORT-MIB | Juniper Networks MIB for managing secure access port features including MAC limiting and DHCP snooping on Juniper EX switches. |
| JUNIPER-SERVICES-MIB | MIB from Juniper Networks for tracking statistics from Adaptive Services (AS) and Multiservices PIC on its service router platforms. |
| JUNIPER-SIP-COMMON-MIB | Juniper Networks MIB for monitoring SIP (Session Initiation Protocol) call statistics on Juniper mobile gateway platforms. |
| Juniper-SLEP-CONF | Juniper Networks conformance statements for Serial Line Encapsulation Protocol (SLEP) management on Juniper E-series routers. |
| Juniper-SLEP-MIB | Juniper Networks MIB for managing Serial Line Encapsulation Protocol (SLEP) WAN interface parameters on Juniper E-series routers. |
| Juniper-SMDS-CONF | Juniper Networks conformance statements for Switched Multimegabit Data Service (SMDS) interface management on Juniper E-series routers. |
| Juniper-SMDS-MIB | Juniper Networks MIB for managing and monitoring SMDS (Switched Multimegabit Data Service) WAN interfaces on Juniper E-series routers. |
| JUNIPER-SMI | Juniper Networks Structure of Management Information (SMI) defining the top-level OID hierarchy and enterprise namespace for all Juniper MIBs. |
| Juniper-SNMP-CONF | Juniper Networks conformance statements for SNMP agent management on Juniper E-series edge routers. |
| Juniper-SNMP-MIB | Juniper Networks MIB for managing SNMP agent parameters, community strings, and access control on Juniper E-series routers. |
| JUNIPER-SNMP-SET-MIB | Juniper Networks MIB providing SNMP set operation capabilities and write access management for Juniper routing platforms. |
| JUNIPER-SOAM-PM-MIB | Juniper Networks MIB for Service OAM (SOAM) performance monitoring of Ethernet OAM sessions per ITU-T Y.1731 and IEEE 802.1ag. |
| Juniper-SONET-CONF | Juniper Networks conformance statements for SONET/SDH interface management on Juniper E-series edge routers. |
| JUNIPER-SONET-MIB | Juniper Networks MIB extending SONET/SDH interface statistics and alarm management on Juniper routing platforms. |
| JUNIPER-SP-MIB | Juniper Networks MIB for monitoring service provider features and chassis resources on Juniper SP router platforms. |
| JUNIPER-SRX5000-SPU-MONITORING-MIB IPNM ✓ | Monitors Security Processing Unit (SPU) performance on Juniper SRX5000 series firewalls, including CPU usage, current/max session counts, and IPv4/IPv6 flow session statistics. |
| Juniper-SSC-Client-CONF | Juniper Networks conformance statements for Service Selection Center (SSC) client management on Juniper E-series routers. |
| Juniper-SSC-CLIENT-MIB | MIB from Juniper Networks covering Service Selection Center (SSC) client configuration and subscriber portal interaction on E-series equipment. |
| Juniper-Subscriber-CONF | Juniper Networks conformance statements for subscriber session management on Juniper E-series broadband edge routers. |
| JUNIPER-SUBSCRIBER-MIB | Juniper Networks MIB for monitoring active subscriber session counts, states, and per-subscriber statistics on Juniper E-series routers. |
| JUNIPER-SYSLOG-MIB | Juniper Networks MIB for monitoring system log (syslog) message generation and buffer statistics on Juniper routing platforms. |
| Juniper-System-Clock-CONF | Juniper Networks conformance definitions for system clock and timing management on Juniper E-series edge routers. |
| Juniper-System-Clock-MIB | Juniper Networks MIB for monitoring system timing, clock source selection, and synchronization on Juniper E-series routers. |
| Juniper-System-MIB | Juniper Networks MIB providing general system information including hardware inventory, uptime, and version data for Juniper E-series. |
| Juniper-TACACS-Plus-Client-CONF | Juniper Networks conformance statements for TACACS+ client authentication management on Juniper E-series edge routers. |
| Juniper-TACACS-Plus-Client-MIB | Juniper Networks MIB for managing TACACS+ client configuration and authentication server access on Juniper E-series routers. |
| Juniper-TC | Juniper Networks textual conventions MIB defining common data types and enumeration values used across Juniper E-series MIB modules. |
| JUNIPER-TIMING-NOTFNS-MIB | MIB from Juniper Networks covering timing and synchronization notifications, such as clock source changes and loss-of-sync alarms. |
| JUNIPER-TLB-MIB | Juniper Networks MIB for monitoring Tunnel Load Balancing (TLB) statistics across tunnel endpoints on Juniper router platforms. |
| Juniper-Trace-Route-CONF | Juniper Networks conformance statements for traceroute (path discovery) test management on Juniper E-series edge routers. |
| JUNIPER-TRACEROUTE-MIB | Juniper Networks MIB for executing and monitoring traceroute path-discovery operations and results on Juniper platforms. |
| Juniper-TSM-CONF | Juniper Networks conformance statements for Tunneled Subscriber Management (TSM) on Juniper E-series broadband edge routers. |
| Juniper-TSM-MIB | Juniper Networks MIB for managing tunneled subscriber session parameters in the Juniper E-series tunneled subscriber management framework. |
| Juniper-UNI-ATM-MIB | Juniper Networks MIB for managing ATM User-Network Interface (UNI) parameters on Juniper E-series access platforms. |
| Juniper-UNI-IF-MIB | Juniper Networks MIB for managing UNI (User-Network Interface) interface configurations on Juniper E-series edge routers. |
| Juniper-UNI-SMI | Juniper Networks Structure of Management Information for the UNI (User-Network Interface) MIB namespace on Juniper E-series platforms. |
| Juniper-UNI-SONET-MIB | Juniper Networks MIB for managing SONET UNI (User-Network Interface) parameters and performance on Juniper E-series routers. |
| JUNIPER-USER-AAA-MIB | Juniper Networks MIB for monitoring user Authentication, Authorization, and Accounting (AAA) session statistics on Juniper platforms. |
| JUNIPER-UTIL-MIB | Juniper Networks MIB for monitoring CPU, memory, and resource utilization statistics on Juniper routing and switching platforms. |
| Juniper-V35-CONF | Juniper Networks conformance statements for V.35 serial WAN interface management on Juniper E-series edge routers. |
| Juniper-V35-MIB | Juniper Networks MIB for managing V.35 serial WAN interface parameters and statistics on Juniper E-series routers. |
| JUNIPER-VIRTUALCHASSIS-MIB | Juniper Networks MIB for monitoring Virtual Chassis configurations, member roles, and interconnect status on Juniper EX switches. |
| JUNIPER-VLAN-MIB | Juniper Networks MIB for managing VLAN membership, tagging, and forwarding configurations on Juniper EX switching platforms. |
| Juniper-VRRP-CONF | Juniper Networks conformance statements for Virtual Router Redundancy Protocol (VRRP) management on Juniper E-series edge routers. |
| JUNIPER-WX-COMMON-MIB | Juniper Networks WX (WAN Acceleration) MIB providing common managed objects for WAN optimization appliance monitoring. |
| JUNIPER-WX-GLOBAL-MIB | MIB for the Juniper Networks WX series that exposes global parameters and operational status for the WAN acceleration system. |
| JUNIPER-WX-GLOBAL-REG | MIB for the Juniper Networks WX series that establishes OID registrations and the top-level namespace for the WX WAN optimization line. |
| JUNIPER-WX-GLOBAL-TC | Juniper Networks WX series MIB defining textual conventions and data types for WAN optimization MIB modules. |
| JUNIPER-WX-MIB | Juniper Networks WX series MIB providing comprehensive management objects for monitoring WAN acceleration and optimization devices. |
| MPLS-MIB | Manages Juniper Networks MPLS label switched path configuration and statistics. |
| NEOTERIS-IVE-MIB | Monitors Juniper Neoteris IVE SSL VPN gateway session counts, authentication status, and tunnel statistics. |
| NETSCREEN-ADDR-MIB | Manages Juniper NetScreen firewall address book objects and address group definitions used in security policies. |
| NETSCREEN-BGP4-MIB | Monitors BGP4 peer session state, prefix counts, and routing table data on Juniper NetScreen ScreenOS firewalls. |
| NETSCREEN-CERTIFICATE-MIB | Manages digital certificate inventory, validity periods, and enrollment status on Juniper NetScreen firewall devices. |
| NETSCREEN-CHASSIS-MIB | Monitors hardware chassis components, module presence, fan, power, and temperature on Juniper NetScreen platforms. |
| NETSCREEN-IDS-MIB | Monitors intrusion detection system attack signatures, detected event counts, and prevention actions on NetScreen firewalls. |
| NETSCREEN-INTERFACE-MIB | Manages physical and logical interface configuration, IP addressing, and traffic statistics on NetScreen firewalls. |
| NETSCREEN-IP-ARP-MIB | Monitors ARP table entries, MAC-to-IP bindings, and ARP cache state on Juniper NetScreen firewalls. |
| NETSCREEN-IPPOOL-MIB | Manages IP address pool configuration and utilization for NAT and VPN address assignment on NetScreen devices. |
| NETSCREEN-NAT-MIB | Monitors Network Address Translation session counts, policy-based NAT rules, and address mapping on NetScreen firewalls. |
| NETSCREEN-NSRP-MIB | Manages NetScreen Redundancy Protocol (NSRP) high-availability cluster state, sync status, and failover events. |
| NETSCREEN-OSPF-MIB | Monitors OSPF neighbor adjacency, link-state database, and area configuration on Juniper NetScreen ScreenOS. |
| NETSCREEN-OSPF-TRAP-MIB | Specifies SNMP traps that notify on OSPF neighbor state transitions and routing events for NetScreen firewalls. |
| NETSCREEN-POLICY-MIB | Handles security policy rules on Juniper NetScreen firewalls, including match criteria, assigned actions, and hit counters. |
| NETSCREEN-PRODUCTS-MIB | Defines product registration OIDs for the Juniper NetScreen firewall and VPN appliance product portfolio. |
| NETSCREEN-QOS-MIB | Configures QoS traffic shaping, bandwidth guarantees, and priority queuing on Juniper NetScreen ScreenOS devices. |
| NETSCREEN-RESOURCE-MIB | Monitors CPU utilization, memory usage, session table capacity, and system resource thresholds on NetScreen firewalls. |
| NETSCREEN-SCHEDULE-MIB | Manages time-based schedule objects used by firewall policies and VPN rules on Juniper NetScreen devices. |
| NETSCREEN-SERVICE-MIB | Defines service and service-group objects by protocol and port range used in NetScreen security policies. |
| NETSCREEN-SET-ADMIN-USR-MIB | MIB for administrator user accounts, privilege levels, and allowed client IP ranges on Juniper NetScreen firewall appliances |
| NETSCREEN-SET-AUTH-MIB | Configures authentication server settings including RADIUS and LDAP parameters on Juniper NetScreen firewalls. |
| NETSCREEN-SET-DHCP-MIB | Covers DHCP server and relay setup on NetScreen ScreenOS devices, including address pools and lease parameters. |
| NETSCREEN-SET-DNS-MIB | Configures DNS server addresses and domain lookup settings on Juniper NetScreen ScreenOS firewalls. |
| NETSCREEN-SET-EMAIL-MIB | Manages email alert notification settings including SMTP server and recipient addresses on NetScreen firewalls. |
| NETSCREEN-SET-GEN-MIB | Configures general system settings including hostname, admin password policy, and device parameters on NetScreen firewalls. |
| NETSCREEN-SET-GLB-MIB | Manages Global Load Balancing configuration and virtual server pool settings on Juniper NetScreen devices. |
| NETSCREEN-SET-LOG-MIB | Configures log facility levels, syslog server destinations, and event filtering on Juniper NetScreen ScreenOS. |
| NETSCREEN-SET-SNMP-MIB | Configures SNMP community strings, trap receivers, and access control parameters on Juniper NetScreen firewalls. |
| NETSCREEN-SET-SYSTIME-MIB | Manages system clock, NTP server configuration, and timezone settings on Juniper NetScreen ScreenOS firewalls. |
| NETSCREEN-SET-URL-FILTER-MIB | Configures URL filtering policy, blocked categories, and web filter server settings on Juniper NetScreen firewalls. |
| NETSCREEN-SET-WEB-MIB | Manages WebUI access settings, HTTP/HTTPS administration ports, and session limits on NetScreen ScreenOS firewalls. |
| NETSCREEN-SMI | Defines the Juniper NetScreen enterprise SMI top-level OID structure and module namespace. |
| NETSCREEN-TRAP-MIB | Defines SNMP trap types and notification objects for system events and alerts on Juniper NetScreen firewalls. |
| NETSCREEN-UAC-MIB | MIB for Unified Access Control active user counts and UAC controller connection status on Juniper NetScreen security devices |
| NETSCREEN-VPN-GATEWAY-MIB | Monitors VPN gateway configuration and active tunnel counts on Juniper NetScreen ScreenOS firewall appliances. |
| NETSCREEN-VPN-IKE-MIB | Monitors IKE Phase 1 and Phase 2 SA negotiation, proposal sets, and key exchange on NetScreen VPN gateways. |
| NETSCREEN-VPN-L2TP-MIB | Manages L2TP tunnel configuration, user authentication, and session state on Juniper NetScreen VPN devices. |
| NETSCREEN-VPN-MANUAL-MIB | Configures manually keyed IPsec VPN tunnels with static SPI and key material on Juniper NetScreen firewalls. |
| NETSCREEN-VPN-MON-MIB | Monitors VPN tunnel liveness, rekey events, and SA lifetime counters on Juniper NetScreen ScreenOS firewalls. |
| NETSCREEN-VPN-PHASEONE-MIB | Manages IKE Phase 1 proposal parameters, authentication methods, and exchange mode on NetScreen firewalls. |
| NETSCREEN-VPN-PHASETWO-MIB | Manages IPsec Phase 2 proposal parameters, PFS groups, and encapsulation mode on Juniper NetScreen firewalls. |
| NETSCREEN-VPN-USER-MIB | Manages VPN user accounts, group memberships, and dial-up VPN authentication on Juniper NetScreen devices. |
| NETSCREEN-VR-BGP4-MIB | Monitors BGP4 routing within virtual router instances on Juniper NetScreen ScreenOS firewall platforms. |
| NETSCREEN-VR-MIB | Manages virtual router configuration, routing instances, and inter-VR routing on Juniper NetScreen devices. |
| NETSCREEN-VR-OSPF-MIB | Monitors OSPF routing state within virtual router contexts on Juniper NetScreen ScreenOS firewalls. |
| NETSCREEN-VR-RIPv2-MIB | Monitors RIPv2 routing within virtual router instances on Juniper NetScreen ScreenOS firewall platforms. |
| NETSCREEN-VSYS-MIB | Manages virtual system (VSYS) configuration, resource allocation, and policy separation on NetScreen firewalls. |
| NETSCREEN-ZONE-MIB | Manages security zone definitions, interface bindings, and intra-zone policy on Juniper NetScreen ScreenOS. |
| PBC-ENT-MIB | Defines enterprise-level management objects for Juniper-branded Pacific Broadband Communications DOCSIS access devices. |
| Unisphere-Data-ATM-MIB | Manages Juniper/Unisphere ERX ATM interface configuration, virtual circuit status, and traffic shaping. |
| Unisphere-Data-BGP-CONF | Defines Juniper/Unisphere ERX BGP MIB agent conformance groups and compliance statements. |
| Unisphere-Data-BGP-MIB | Manages Juniper/Unisphere ERX BGP routing protocol peers, path attributes, and routing policies. |
| Unisphere-Data-ERX-Registry | Defines Juniper/Unisphere ERX router product OID registration and enterprise identifier hierarchy. |
| Unisphere-Data-ERX-System-MIB | Manages Juniper/Unisphere ERX router system configuration, redundancy, and hardware inventory. |
| Unisphere-Data-MPLS-MIB | Manages Juniper/Unisphere ERX MPLS label switching, LSP configuration, and forwarding table entries. |
| Unisphere-Data-Policy-Manager-CONF | Defines Juniper/Unisphere ERX policy manager MIB agent conformance groups and compliance statements. |
| Unisphere-Data-PPPoE-CONF | Defines Juniper/Unisphere ERX PPPoE MIB agent conformance groups and compliance statements. |
| Unisphere-Data-PPPOE-MIB | Manages Juniper/Unisphere ERX PPPoE session configuration, AC name, service name, and statistics. |
| Unisphere-Data-PPPOE-PROFILE-MIB | Manages PPPoE subscriber profile configuration on Juniper/Unisphere ERX broadband access routers. |
| Unisphere-Data-SNMP-CONF | Defines conformance statements for Juniper/Unisphere SNMP agent management on ERX routers. |
| Unisphere-Data-SNMP-MIB | Manages SNMP agent configuration, communities, and access control on Juniper/Unisphere ERX routers. |