JUNIPER-IPv6-MIB

All MIBs › JUNIPER-IPv6-MIB

Organization: Juniper Networks, Inc.

Last Updated: 2003-07-18

Category: IP and Core Protocols, Technology: IPv6, Vendor: Juniper

Description: Provides IPv6 managed objects for address assignment, neighbor discovery, and routing statistics on Juniper Networks routing platforms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is JUNIPER-IPv6-MIB?

JUNIPER-IPv6-MIB is a Juniper Networks enterprise MIB (jnxMibs 11) that extends the standard IPV6-MIB's ipv6IfEntry with additional IPv6 traffic-statistics counters for Juniper routing platforms. Under jnxIpv6Stats it defines a global-statistics group (jnxIpv6GlobalStats) with Counter64 objects covering the IPv6 forwarding path end to end — jnxIpv6StatsReceives, jnxIpv6StatsDelivers, and jnxIpv6StatsForwards for basic packet flow; jnxIpv6StatsTooShorts, jnxIpv6StatsTooSmalls, jnxIpv6StatsBadOptions, and jnxIpv6StatsBadVersions for malformed-packet detection; jnxIpv6StatsFragments, jnxIpv6StatsFragDrops, jnxIpv6StatsFragTimeOuts, and jnxIpv6StatsReasmOKs for fragmentation/reassembly outcomes; and jnxIpv6StatsOutDiscards/jnxIpv6StatsOutNoRoutes for output-side failures — alongside sibling groups jnxIcmpv6GlobalStats and jnxIpv6IfStats for ICMPv6 and per-interface counters. Because these are all cumulative Counter64 objects rather than configuration state, the MIB's monitoring value is purely in trend/rate analysis of IPv6 traffic health and forwarding-path errors. It depends on the standard IPV6-MIB for the interface table it extends and on JUNIPER-SMI for its enterprise OID root. It is deployed on Juniper routers and switches running IPv6, and the JUNIPER-IPv6-MIB MIB is the reference module for these Juniper-specific IPv6 traffic counters.

IPNetwork Monitor allows you to monitor SNMP objects defined in JUNIPER-IPv6-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Juniper Networks routers and switches running IPv6 (JUNOS-based platforms)

Monitoring Examples

An operator polls jnxIpv6StatsOutNoRoutes and jnxIpv6StatsOutDiscards over time to watch for growing IPv6 forwarding failures, and cross-checks jnxIpv6StatsFragDrops and jnxIpv6StatsFragTimeOuts; a rising jnxIpv6StatsOutNoRoutes counter alongside stable jnxIpv6StatsReceives would point to a missing or withdrawn IPv6 route rather than an inbound traffic problem.

What Can Be Monitored

IPv6 packets received/delivered/forwarded counters
malformed packet counters (too-short, bad option, bad version)
fragmentation and reassembly counters
output discard and no-route counters
ICMPv6 global statistics
per-interface IPv6 statistics

Imported Objects

From IPV6-MIB

ipv6IfEntry

OBJECT-TYPE

From JUNIPER-SMI

jnxMibs

OBJECT-IDENTITY

From SNMPv2-SMI

Counter64
MODULE-IDENTITY
OBJECT-TYPE

How to Use in IPNetwork Monitor

Example using jnxIpv6StatsReceives OID:

Select a Juniper Networks router/switch running IPv6 (JUNOS-based platform) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type jnxIpv6StatsReceives into the Find box to locate it in the OID tree, then select it and click OK. The total number of IPv6 packets received. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
jnxIpv6	1.3.6.1.4.1.2636.3.11			The MIB modules extends the ifTable as defined in IF-MIB.
jnxIpv6Stats	1.3.6.1.4.1.2636.3.11.1
jnxIpv6GlobalStats	1.3.6.1.4.1.2636.3.11.1.1
C64 jnxIpv6StatsReceivesEx	1.3.6.1.4.1.2636.3.11.1.1.1	Counter64	read-only	The total number of IPv6 packets received.
C64 jnxIpv6StatsTooShorts	1.3.6.1.4.1.2636.3.11.1.1.2	Counter64	read-only	The total number of IPv6 packets with size smaller than minimum.
C64 jnxIpv6StatsTooSmalls	1.3.6.1.4.1.2636.3.11.1.1.3	Counter64	read-only	The total number of IPv6 packets with data size less than data length.
C64 jnxIpv6StatsBadOptions	1.3.6.1.4.1.2636.3.11.1.1.4	Counter64	read-only	The total number of IPv6 packets encountering errors in option processing.
C64 jnxIpv6StatsBadVersions	1.3.6.1.4.1.2636.3.11.1.1.5	Counter64	read-only	The total number of IPv6 packets with incorrect version number.
C64 jnxIpv6StatsFragments	1.3.6.1.4.1.2636.3.11.1.1.6	Counter64	read-only	The total number of packet fragments received.
C64 jnxIpv6StatsFragDrops	1.3.6.1.4.1.2636.3.11.1.1.7	Counter64	read-only	The total number of fragments dropped (duplicates or out of space).
C64 jnxIpv6StatsFragTimeOuts	1.3.6.1.4.1.2636.3.11.1.1.8	Counter64	read-only	The total number of fragments dropped due to timeouts.
C64 jnxIpv6StatsFragOverFlows	1.3.6.1.4.1.2636.3.11.1.1.9	Counter64	read-only	The total number of fragments that exceeded limit.
C64 jnxIpv6StatsReasmOKs	1.3.6.1.4.1.2636.3.11.1.1.10	Counter64	read-only	The total number of IPv6 packets reassembled successfully.
C64 jnxIpv6StatsDelivers	1.3.6.1.4.1.2636.3.11.1.1.11	Counter64	read-only	The total number of IPv6 packets delivered to upper layers.
C64 jnxIpv6StatsForwards	1.3.6.1.4.1.2636.3.11.1.1.12	Counter64	read-only	The total number of IPv6 packets forwarded.
C64 jnxIpv6StatsUnreachables	1.3.6.1.4.1.2636.3.11.1.1.13	Counter64	read-only	The total number of IPv6 packets received for unreachable destinations.
C64 jnxIpv6StatsRedirects	1.3.6.1.4.1.2636.3.11.1.1.14	Counter64	read-only	The total number of IPv6 packets forwarded on the same net as received.
C64 jnxIpv6StatsOutRequests	1.3.6.1.4.1.2636.3.11.1.1.15	Counter64	read-only	The total number of IPv6 packets generated by this host.
C64 jnxIpv6StatsRawOuts	1.3.6.1.4.1.2636.3.11.1.1.16	Counter64	read-only	The total number of IPv6 packets sent with fabricated IPv6 headers.
C64 jnxIpv6StatsOutDiscards	1.3.6.1.4.1.2636.3.11.1.1.17	Counter64	read-only	The total number of output IPv6 packets dropped due to no bufs, etc.
C64 jnxIpv6StatsOutNoRoutes	1.3.6.1.4.1.2636.3.11.1.1.18	Counter64	read-only	The total number of output IPv6 packets discarded because no route could be found.
C64 jnxIpv6StatsOutFragOKs	1.3.6.1.4.1.2636.3.11.1.1.19	Counter64	read-only	The total number of output IPv6 packets fragmented.
C64 jnxIpv6StatsOutFragCreates	1.3.6.1.4.1.2636.3.11.1.1.20	Counter64	read-only	The total number of output IPv6 packets that have been generated as a result of fragmentation at the output interface.
C64 jnxIpv6StatsOutFragFails	1.3.6.1.4.1.2636.3.11.1.1.21	Counter64	read-only	The total number of output IPv6 packets that can't be fragmented.
C64 jnxIpv6StatsBadScopes	1.3.6.1.4.1.2636.3.11.1.1.22	Counter64	read-only	The total number of IPv6 packets that violate scope rules.
C64 jnxIpv6StatsNotMcastMembers	1.3.6.1.4.1.2636.3.11.1.1.23	Counter64	read-only	The total number of IPv6 multicast packets which we don't join.
C64 jnxIpv6StatsHdrNotContinuous	1.3.6.1.4.1.2636.3.11.1.1.24	Counter64	read-only	The total number of IPv6 packets whose headers are not continuous.
C64 jnxIpv6StatsNoGifs	1.3.6.1.4.1.2636.3.11.1.1.25	Counter64	read-only	The total number of tunneling IPv6 packets that can't find gif.
C64 jnxIpv6StatsTooManyHdrs	1.3.6.1.4.1.2636.3.11.1.1.26	Counter64	read-only	The total number of IPv6 packets discarded due to too many headers.
C64 jnxIpv6StatsForwCacheHits	1.3.6.1.4.1.2636.3.11.1.1.27	Counter64	read-only	The total number of forward cache hits.
C64 jnxIpv6StatsForwCacheMisses	1.3.6.1.4.1.2636.3.11.1.1.28	Counter64	read-only	The total number of forward cache misses.
C64 jnxIpv6StatsOutDeadNextHops	1.3.6.1.4.1.2636.3.11.1.1.29	Counter64	read-only	The total number of output IPv6 packets destined to dead next hops.
C64 jnxIpv6StatsOptRateDrops	1.3.6.1.4.1.2636.3.11.1.1.30	Counter64	read-only	The total number of IPv6 option packets dropped due to rate limits.
C64 jnxIpv6StatsMCNoDests	1.3.6.1.4.1.2636.3.11.1.1.31	Counter64	read-only	The total number of IPv6 Multicast packets dropped due to no destination.
C64 jnxIpv6StatsInHopByHops	1.3.6.1.4.1.2636.3.11.1.1.32	Counter64	read-only	The total number of IPv6 packets received with a Hop by Hop next header.
C64 jnxIpv6StatsInIcmps	1.3.6.1.4.1.2636.3.11.1.1.33	Counter64	read-only	The total number of IPv6 packets received with an ICMP(v4) next header.
C64 jnxIpv6StatsInIgmps	1.3.6.1.4.1.2636.3.11.1.1.34	Counter64	read-only	The total number of IPv6 packets received with an IGMP next header.
C64 jnxIpv6StatsInIps	1.3.6.1.4.1.2636.3.11.1.1.35	Counter64	read-only	The total number of IPv6 packets received with an IPv4 next header.
C64 jnxIpv6StatsInTcps	1.3.6.1.4.1.2636.3.11.1.1.36	Counter64	read-only	The total number of IPv6 packets received with a TCP next header.
C64 jnxIpv6StatsInUdps	1.3.6.1.4.1.2636.3.11.1.1.37	Counter64	read-only	The total number of IPv6 packets received with a UDP next header.
C64 jnxIpv6StatsInIdps	1.3.6.1.4.1.2636.3.11.1.1.38	Counter64	read-only	The total number of IPv6 packets received with an xns IDP next header.
C64 jnxIpv6StatsInTps	1.3.6.1.4.1.2636.3.11.1.1.39	Counter64	read-only	The total number of IPv6 packets received with a TP4 next header.
C64 jnxIpv6StatsInIpv6s	1.3.6.1.4.1.2636.3.11.1.1.40	Counter64	read-only	The total number of IPv6 packets with an IPv6 next header.
C64 jnxIpv6StatsInRoutings	1.3.6.1.4.1.2636.3.11.1.1.41	Counter64	read-only	The total number of IPv6 packets with an IPv6 Routing next header.
C64 jnxIpv6StatsInFrags	1.3.6.1.4.1.2636.3.11.1.1.42	Counter64	read-only	The total number of IPv6 packets with an IPv6 Fragment next header.
C64 jnxIpv6StatsInEsps	1.3.6.1.4.1.2636.3.11.1.1.43	Counter64	read-only	The total number of IPv6 packets with an IPv6 ESP next header.
C64 jnxIpv6StatsInAhs	1.3.6.1.4.1.2636.3.11.1.1.44	Counter64	read-only	The total number of IPv6 packets with an IPv6 AH next header.
C64 jnxIpv6StatsInIcmpv6s	1.3.6.1.4.1.2636.3.11.1.1.45	Counter64	read-only	The total number of IPv6 packets with an ICMPv6 next header.
C64 jnxIpv6StatsInNoNhs	1.3.6.1.4.1.2636.3.11.1.1.46	Counter64	read-only	The total number of IPv6 packets with no next header.
C64 jnxIpv6StatsInDestOpts	1.3.6.1.4.1.2636.3.11.1.1.47	Counter64	read-only	The total number of IPv6 packets with an IPv6 Destination Option next header.
C64 jnxIpv6StatsInIsoIps	1.3.6.1.4.1.2636.3.11.1.1.48	Counter64	read-only	The total number of IPv6 packets with an ISO CLNP next header.
C64 jnxIpv6StatsInOspfs	1.3.6.1.4.1.2636.3.11.1.1.49	Counter64	read-only	The total number of IPv6 packets with an OSPF next header.
C64 jnxIpv6StatsInEths	1.3.6.1.4.1.2636.3.11.1.1.50	Counter64	read-only	The total number of IPv6 packets with an Ethernet next header.
C64 jnxIpv6StatsInPims	1.3.6.1.4.1.2636.3.11.1.1.51	Counter64	read-only	The total number of IPv6 packets with a PIM next header.
jnxIcmpv6GlobalStats	1.3.6.1.4.1.2636.3.11.1.2
C64 jnxIcmpv6StatsErrors	1.3.6.1.4.1.2636.3.11.1.2.1	Counter64	read-only	The total number of calls to icmp_error.
C64 jnxIcmpv6StatsCantErrors	1.3.6.1.4.1.2636.3.11.1.2.2	Counter64	read-only	The total number of errors not generated because the the old message was an icmp error.
C64 jnxIcmpv6StatsTooFreqs	1.3.6.1.4.1.2636.3.11.1.2.3	Counter64	read-only	The total number of errors not generated due to rate limitations.
C64 jnxIcmpv6StatsBadCodes	1.3.6.1.4.1.2636.3.11.1.2.4	Counter64	read-only	The total number of messages with bad code fields.
C64 jnxIcmpv6StatsTooShorts	1.3.6.1.4.1.2636.3.11.1.2.5	Counter64	read-only	The total number of messages less than the minimum length.
C64 jnxIcmpv6StatsBadChecksums	1.3.6.1.4.1.2636.3.11.1.2.6	Counter64	read-only	The total number of messages with bad checksums.
C64 jnxIcmpv6StatsBadLenths	1.3.6.1.4.1.2636.3.11.1.2.7	Counter64	read-only	The total number of messages with bad length.
C64 jnxIcmpv6StatsNoRoutes	1.3.6.1.4.1.2636.3.11.1.2.8	Counter64	read-only	The total number of 'no route' messages generated.
C64 jnxIcmpv6StatsAdminProhibits	1.3.6.1.4.1.2636.3.11.1.2.9	Counter64	read-only	The total number of 'administratively prohibited' messages generated.
C64 jnxIcmpv6StatsBeyondScopes	1.3.6.1.4.1.2636.3.11.1.2.10	Counter64	read-only	The total number of 'beyond scope' messages generated.
C64 jnxIcmpv6StatsAddrUnreachs	1.3.6.1.4.1.2636.3.11.1.2.11	Counter64	read-only	The total number of 'address unreachable' messages generated.
C64 jnxIcmpv6StatsPortUnreachs	1.3.6.1.4.1.2636.3.11.1.2.12	Counter64	read-only	The total number of 'port unreachable' messages generated.
C64 jnxIcmpv6StatsTooBigs	1.3.6.1.4.1.2636.3.11.1.2.13	Counter64	read-only	The total number of 'Packet Too Big' messages generated.
C64 jnxIcmpv6StatsExceedTrans	1.3.6.1.4.1.2636.3.11.1.2.14	Counter64	read-only	The total number of 'time exceed transit' messages generated.
C64 jnxIcmpv6StatsExceedReasms	1.3.6.1.4.1.2636.3.11.1.2.15	Counter64	read-only	The total number of 'time exceed reassembly' messages generated.
C64 jnxIcmpv6StatsBadHdrFields	1.3.6.1.4.1.2636.3.11.1.2.16	Counter64	read-only	The total number of 'erroneous header field' messages generated.
C64 jnxIcmpv6StatsBadNextHdrs	1.3.6.1.4.1.2636.3.11.1.2.17	Counter64	read-only	The total number of 'unrecognized next header' messages generated.
C64 jnxIcmpv6StatsBadOptions	1.3.6.1.4.1.2636.3.11.1.2.18	Counter64	read-only	The total number of 'unrecognized option' messages generated.
C64 jnxIcmpv6StatsRedirects	1.3.6.1.4.1.2636.3.11.1.2.19	Counter64	read-only	The total number of 'redirect' messages generated.
C64 jnxIcmpv6StatsOthers	1.3.6.1.4.1.2636.3.11.1.2.20	Counter64	read-only	The total number of generated messages types other than the ones listed above.
C64 jnxIcmpv6StatsResponses	1.3.6.1.4.1.2636.3.11.1.2.21	Counter64	read-only	The total number of message responses generated.
C64 jnxIcmpv6StatsExcessNDOptions	1.3.6.1.4.1.2636.3.11.1.2.22	Counter64	read-only	The total number of messages processed with too many ND options.
C64 jnxIcmpv6StatsInUnreachables	1.3.6.1.4.1.2636.3.11.1.2.23	Counter64	read-only	The total number of Unreachable messages received.
C64 jnxIcmpv6StatsInPktTooBigs	1.3.6.1.4.1.2636.3.11.1.2.24	Counter64	read-only	The total number of 'Packet Too Big' messages received.
C64 jnxIcmpv6StatsInTimeExceeds	1.3.6.1.4.1.2636.3.11.1.2.25	Counter64	read-only	The total number of Time Exceeded messages received.
C64 jnxIcmpv6StatsInParamProbs	1.3.6.1.4.1.2636.3.11.1.2.26	Counter64	read-only	The total number of Parameter Problem messages received.
C64 jnxIcmpv6StatsInEchoReqs	1.3.6.1.4.1.2636.3.11.1.2.27	Counter64	read-only	The total number of Echo Request messages received.
C64 jnxIcmpv6StatsInEchoReplies	1.3.6.1.4.1.2636.3.11.1.2.28	Counter64	read-only	The total number of Echo Reply messages received.
C64 jnxIcmpv6StatsInMLQueries	1.3.6.1.4.1.2636.3.11.1.2.29	Counter64	read-only	The total number of Multicast Listener Query messages received.
C64 jnxIcmpv6StatsInMLReports	1.3.6.1.4.1.2636.3.11.1.2.30	Counter64	read-only	The total number of Multicast Listener Report messages received.
C64 jnxIcmpv6StatsInMLDones	1.3.6.1.4.1.2636.3.11.1.2.31	Counter64	read-only	The total number of Multicast Listener Done messages received.
C64 jnxIcmpv6StatsInRtrSolicits	1.3.6.1.4.1.2636.3.11.1.2.32	Counter64	read-only	The total number of Router Solicitation messages received.
C64 jnxIcmpv6StatsInRtrAdvs	1.3.6.1.4.1.2636.3.11.1.2.33	Counter64	read-only	The total number of Router Advertisment messages received.
C64 jnxIcmpv6StatsInNbrSolicits	1.3.6.1.4.1.2636.3.11.1.2.34	Counter64	read-only	The total number of Neighbor Solicitation messages received.
C64 jnxIcmpv6StatsInNbrAdvs	1.3.6.1.4.1.2636.3.11.1.2.35	Counter64	read-only	The total number of Neighbor Advertisement messages received.
C64 jnxIcmpv6StatsInRedirects	1.3.6.1.4.1.2636.3.11.1.2.36	Counter64	read-only	The total number of Redirect messages received.
C64 jnxIcmpv6StatsInRtrRenumbers	1.3.6.1.4.1.2636.3.11.1.2.37	Counter64	read-only	The total number of Router Renumber messages received.
C64 jnxIcmpv6StatsInNIReqs	1.3.6.1.4.1.2636.3.11.1.2.38	Counter64	read-only	The total number of Node Information Request messages received.
C64 jnxIcmpv6StatsInNIReplies	1.3.6.1.4.1.2636.3.11.1.2.39	Counter64	read-only	The total number of Node Information Report messages received.
C64 jnxIcmpv6StatsOutUnreachables	1.3.6.1.4.1.2636.3.11.1.2.40	Counter64	read-only	The total number of Unreachable messages transmitted.
C64 jnxIcmpv6StatsOutPktTooBigs	1.3.6.1.4.1.2636.3.11.1.2.41	Counter64	read-only	The total number of 'Packet Too Big' messages to be transmitted. Some of these icmp messages may not be actually sent out (problems with rate limits, source addresses, etc). jnxIcmpv6StatsTooBigs represents the number of 'Too Big Packet' messages that actually get out.
C64 jnxIcmpv6StatsOutTimeExceeds	1.3.6.1.4.1.2636.3.11.1.2.42	Counter64	read-only	The total number of Time Exceeded messages transmitted.
C64 jnxIcmpv6StatsOutParamProbs	1.3.6.1.4.1.2636.3.11.1.2.43	Counter64	read-only	The total number of Parameter Problem messages transmitted.
C64 jnxIcmpv6StatsOutEchoReqs	1.3.6.1.4.1.2636.3.11.1.2.44	Counter64	read-only	The total number of Echo Request messages transmitted.
C64 jnxIcmpv6StatsOutEchoReplies	1.3.6.1.4.1.2636.3.11.1.2.45	Counter64	read-only	The total number of Echo Reply messages transmitted.
C64 jnxIcmpv6StatsOutMLQueries	1.3.6.1.4.1.2636.3.11.1.2.46	Counter64	read-only	The total number of Multicast Listener Query messages transmitted.
C64 jnxIcmpv6StatsOutMLReports	1.3.6.1.4.1.2636.3.11.1.2.47	Counter64	read-only	The total number of Multicast Listener Report messages transmitted.
C64 jnxIcmpv6StatsOutMLDones	1.3.6.1.4.1.2636.3.11.1.2.48	Counter64	read-only	The total number of Multicast Listener Done messages transmitted.
C64 jnxIcmpv6StatsOutRtrSolicits	1.3.6.1.4.1.2636.3.11.1.2.49	Counter64	read-only	The total number of Router Solicitation messages transmitted.
C64 jnxIcmpv6StatsOutRtrAdvs	1.3.6.1.4.1.2636.3.11.1.2.50	Counter64	read-only	The total number of Router Advertisment messages transmitted.
C64 jnxIcmpv6StatsOutNbrSolicits	1.3.6.1.4.1.2636.3.11.1.2.51	Counter64	read-only	The total number of Neighbor Solicitation messages transmitted.
C64 jnxIcmpv6StatsOutNbrAdvs	1.3.6.1.4.1.2636.3.11.1.2.52	Counter64	read-only	The total number of Neighbor Advertisement messages transmitted.
C64 jnxIcmpv6StatsOutRedirects	1.3.6.1.4.1.2636.3.11.1.2.53	Counter64	read-only	The total number of Redirect messages transmitted.
C64 jnxIcmpv6StatsOutRtrRenumbers	1.3.6.1.4.1.2636.3.11.1.2.54	Counter64	read-only	The total number of Router Renumber messages transmitted.
C64 jnxIcmpv6StatsOutNIReqs	1.3.6.1.4.1.2636.3.11.1.2.55	Counter64	read-only	The total number of Node Information Request messages transmitted.
C64 jnxIcmpv6StatsOutNIReplies	1.3.6.1.4.1.2636.3.11.1.2.56	Counter64	read-only	The total number of Node Information Report messages transmitted.
jnxIpv6IfStats	1.3.6.1.4.1.2636.3.11.1.3
jnxIpv6IfStatsTable	1.3.6.1.4.1.2636.3.11.1.3.1		not-accessible	The (conceptual) table containing IPv6 statistics of an interface
jnxIpv6IfStatsEntry	1.3.6.1.4.1.2636.3.11.1.3.1.1		not-accessible	An entry (conceptual row) containing IPv6 statistics entry of an interface
C64 jnxIpv6IfInOctets	1.3.6.1.4.1.2636.3.11.1.3.1.1.1	Counter64	read-only	The total number of octets received on the interface
C64 jnxIpv6IfOutOctets	1.3.6.1.4.1.2636.3.11.1.3.1.1.2	Counter64	read-only	The total number of octets transmitted out of the interface

RFC description

Juniper Networks IPv6 statistics extension for interface and global protocol monitoring.

Start monitoring Juniper Networks router/switch running IPv6 (JUNOS-based platform) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download JUNIPER-IPv6-MIB