All MIBs › JNX-L2TP-MIB
Organization: Juniper Networks Inc.
Last Updated: 2013-11-21
Category: Protocol: L2TP, Vendor: Juniper
Description: Defines managed objects for Layer 2 Tunneling Protocol (L2TP) sessions and tunnels on Juniper Networks devices.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is JNX-L2TP-MIB?
JNX-L2TP-MIB is Juniper Networks' proprietary MIB for Layer 2 Tunneling Protocol (L2TP), modeled on the standard L2TP MIB from RFC 3371 but with Juniper-specific index differences for its tunnel and session statistics tables. It exposes monitoring data for L2TP tunnels and sessions terminated or originated on a Juniper router, covering tunnel-level and per-session statistics used in broadband remote access and VPN tunneling deployments. Its focus is on service/software status rather than hardware sensors: administrators use it to confirm how many L2TP tunnels and sessions are currently active and to watch per-tunnel/session statistics counters for signs of instability, since a device supporting L2TP tunneling for subscriber sessions depends on this protocol staying healthy for those users to remain connected. It explicitly derives from and modifies the IETF RFC 3371 L2TP MIB, changing the INDEX fields of the tunnel and session statistics tables while keeping the overall object model similar. It is deployed on Juniper routers acting as LAC/LNS endpoints in broadband access networks (e.g., ISP L2TP-based subscriber tunneling) or L2TP-based VPN termination points. Engineers can download the JNX-L2TP-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in JNX-L2TP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Juniper Networks router (LAC/LNS L2TP endpoint)
Monitoring Examples
An operator would monitor Juniper's equivalent of the l2tpTunnelStatsTable and l2tpSessionStatsTable (indexed differently than the RFC 3371 baseline per the module description) to track the number of active tunnels and sessions and their associated packet/error counters. A tunnel showing rising error counts or an unexpected drop in active session count would indicate an L2TP tunnel flapping or subscriber sessions being dropped. Because sample_objects were not provided for this module, exact Juniper-specific object names cannot be confirmed beyond the tunnel/session statistics tables referenced in the module description.
What Can Be Monitored
- active L2TP tunnel count
- active L2TP session count
- per-tunnel statistics counters
- per-session statistics counters
This MIB depends on
Related MIBs
Imported Objects
From HCNUM-TC
| CounterBasedGauge64 |
From INET-ADDRESS-MIB
| InetAddress | |
| InetAddressType | |
| InetPortNumber |
From JUNIPER-SMI
| jnxL2tpMibRoot | OBJECT-IDENTITY |
From SNMP-FRAMEWORK-MIB
| SnmpAdminString |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Counter64 | |
| Gauge32 | |
| Integer32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| TimeTicks | |
| Unsigned32 | |
| transmission |
From SNMPv2-TC
| DateAndTime | |
| RowStatus | |
| StorageType | |
| TEXTUAL-CONVENTION | |
| TruthValue |
How to Use in IPNetwork Monitor
Example using jnxL2tpTunnelStatsControlTxPkts OID:
Select a Juniper Networks router (LAC/LNS L2TP endpoint) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type jnxL2tpTunnelStatsControlTxPkts into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. This object contains the number of control packets that were transmitted to the tunnel peer. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| jnxL2tp | 1.3.6.1.4.1.2636.3.49.1 | Provides monitoring information regarding the Layer Two Transport Protocol. This MIB is based on the standard MIB defined in RFC 3371. However, there are significant differences including the INDEX fields of l2tpTunnelStatsTable and l2tpSessionStatsTable. | ||
| jnxL2tpObjects | 1.3.6.1.4.1.2636.3.49.1.1 | |||
| jnxL2tpScalar | 1.3.6.1.4.1.2636.3.49.1.1.1 | |||
| jnxL2tpStats | 1.3.6.1.4.1.2636.3.49.1.1.1.1 | |||
| G32 jnxL2tpStatsTotalTunnels | 1.3.6.1.4.1.2636.3.49.1.1.1.1.1 | Gauge32 | read-only | This object returns the total number of tunnels that are currently in the established state. This is an instantaneously accumulated value which can increase or decrease depending on number of tunnels established at the time of querying. |
| G32 jnxL2tpStatsTotalSessions | 1.3.6.1.4.1.2636.3.49.1.1.1.1.2 | Gauge32 | read-only | This object returns the total number of sessions that are currently in the established state. This is an instantaneously accumulated value which can increase or decrease depending on number of tunnels established at the time of querying. |
| G32 jnxL2tpStatsControlRxOctets | 1.3.6.1.4.1.2636.3.49.1.1.1.1.3 | Gauge32 | read-only | This object returns the number of control channel octets received by the existing tunnels. This is an instantaneously accumulated value which can increase or decrease depending on number of tunnels established at the time of querying. |
| G32 jnxL2tpStatsControlRxPkts | 1.3.6.1.4.1.2636.3.49.1.1.1.1.4 | Gauge32 | read-only | This object returns the number of control packets received by the existing tunnels. This is an instantaneously accumulated value which can increase or decrease depending on number of tunnels established at the time of querying. |
| G32 jnxL2tpStatsControlTxOctets | 1.3.6.1.4.1.2636.3.49.1.1.1.1.5 | Gauge32 | read-only | This object returns the number of control channel octets that were transmitted to the existing tunnel endpoints. This is an instantaneously accumulated value which can increase or decrease depending on number of tunnels established at the time of querying. |
| G32 jnxL2tpStatsControlTxPkts | 1.3.6.1.4.1.2636.3.49.1.1.1.1.6 | Gauge32 | read-only | This object returns the number of control packets that were transmitted to the existing tunnel endpoints.This is an instantaneously accumulated value which can increase or decrease depending on number of tunnels established at the time of querying. |
| G32 jnxL2tpStatsPayloadRxOctets | 1.3.6.1.4.1.2636.3.49.1.1.1.1.7 | Gauge32 | read-only | This object returns the number of payload channel octets that were received on the exisiting tunnels. This is an instantaneously accumulated value which can increase or decrease depending on number of tunnels established at the time of querying. This is deprecated and replaced by jnxL2tpStatsPayloadRxOctets64 |
| NUM jnxL2tpStatsPayloadRxPkts | 1.3.6.1.4.1.2636.3.49.1.1.1.1.8 | CounterBasedGauge64 | read-only | This object returns the number of payload packets that were received on the existing tunnels. This is an instantaneously accumulated value which can increase or decrease depending on number of tunnels established at the time of querying. |
| NUM jnxL2tpStatsPayloadTxOctets | 1.3.6.1.4.1.2636.3.49.1.1.1.1.9 | CounterBasedGauge64 | read-only | This object returns the number of payload channel octets that were transmitted to the existing tunnel peers. This is an instantaneously accumulated value which can increase or decrease depending on number of tunnels established at the time of querying. |
| NUM jnxL2tpStatsPayloadTxPkts | 1.3.6.1.4.1.2636.3.49.1.1.1.1.10 | CounterBasedGauge64 | read-only | This object returns the number of payload packets that were transmitted to existing tunnel peers. This is an instantaneously accumulated value which can increase or decrease depending on number of tunnels established at the time of querying. |
| NUM jnxL2tpStatsErrorTxPkts | 1.3.6.1.4.1.2636.3.49.1.1.1.1.11 | CounterBasedGauge64 | read-only | This object returns the number of errored packet transmission attempts to the existing tunnel peers. This is an instantaneously accumulated value which can increase or decrease depending on number of tunnels established at the time of querying. |
| NUM jnxL2tpStatsErrorRxPkts | 1.3.6.1.4.1.2636.3.49.1.1.1.1.12 | CounterBasedGauge64 | read-only | This object returns the number of errored packets that were received from the existing tunnel peers. This is an instantaneously accumulated value which can increase or decrease depending on number of tunnels established at the time of querying. |
| NUM jnxL2tpStatsPayloadRxOctets64 | 1.3.6.1.4.1.2636.3.49.1.1.1.1.13 | CounterBasedGauge64 | read-only | This object returns the number of payload channel octets that were received on the exisiting tunnels. This is an instantaneously accumulated value which can increase or decrease depending on number of tunnels established at the time of querying. |
| jnxL2tpTunnelGroupStatsTable | 1.3.6.1.4.1.2636.3.49.1.1.2 | not-accessible | The L2TP tunnel group status and statistics table. This table contains objects that can be used to describe the current status and statistics of a single L2TP tunnel group. | |
| jnxL2tpTunnelGroupStatsEntry | 1.3.6.1.4.1.2636.3.49.1.1.2.1 | not-accessible | An L2TP tunnel group stats entry. | |
| OCT jnxL2tpTunnelGroupStatsTnlGrpName | 1.3.6.1.4.1.2636.3.49.1.1.2.1.1 | OCTET STRING | not-accessible | This object contains the name of this tunnel group. |
| IPt jnxL2tpTunnelGroupStatsGatewayAddrType | 1.3.6.1.4.1.2636.3.49.1.1.2.1.2 | InetAddressType | read-only | This object contains the type of local IP address for L2TP tunnels that are part of this group. |
| IP jnxL2tpTunnelGroupStatsGatewayAddr | 1.3.6.1.4.1.2636.3.49.1.1.2.1.3 | InetAddress | read-only | This object contains the local IP address for L2TP tunnels that are part of this group. |
| STR jnxL2tpTunnelGroupStatsSvcIntfName | 1.3.6.1.4.1.2636.3.49.1.1.2.1.4 | SnmpAdminString | read-only | This object contains the name of the service interface that is hosting this tunnel group. |
| G32 jnxL2tpTunnelGroupStatsTotalTunnels | 1.3.6.1.4.1.2636.3.49.1.1.2.1.5 | Gauge32 | read-only | This object returns the total number of tunnels that are currently in the established state in this tunnel group. |
| G32 jnxL2tpTunnelGroupStatsTotalSessions | 1.3.6.1.4.1.2636.3.49.1.1.2.1.6 | Gauge32 | read-only | This object returns the total number of sessions that are currently in the established state in this tunnel group. |
| jnxL2tpTunnelStatsTable | 1.3.6.1.4.1.2636.3.49.1.1.3 | not-accessible | The L2TP tunnel status and statistics table. This table contains objects that can be used to describe the current status and statistics of a single L2TP tunnel. | |
| jnxL2tpTunnelStatsEntry | 1.3.6.1.4.1.2636.3.49.1.1.3.1 | not-accessible | An L2TP tunnel interface stats entry. | |
| I32 jnxL2tpTunnelStatsLocalTID | 1.3.6.1.4.1.2636.3.49.1.1.3.1.1 | Integer32 | not-accessible | This object contains the local tunnel Identifier. |
| STR jnxL2tpTunnelStatsServiceInterface | 1.3.6.1.4.1.2636.3.49.1.1.3.1.2 | SnmpAdminString | read-only | This object contains the name of the service interface on which this tunnel is being hosted. |
| STR jnxL2tpTunnelStatsTunnelGroup | 1.3.6.1.4.1.2636.3.49.1.1.3.1.3 | SnmpAdminString | read-only | This object contains the name of the tunnel group that this tunnel is part of. |
| I32 jnxL2tpTunnelStatsRemoteTID | 1.3.6.1.4.1.2636.3.49.1.1.3.1.4 | Integer32 | read-only | This object contains the remote tunnel Identifier. |
| IPt jnxL2tpTunnelStatsRemoteIpAddrType | 1.3.6.1.4.1.2636.3.49.1.1.3.1.5 | InetAddressType | read-only | This object contains the type of the remote end address of this tunnel. |
| IP jnxL2tpTunnelStatsRemoteIpAddress | 1.3.6.1.4.1.2636.3.49.1.1.3.1.6 | InetAddress | read-only | This object contains the remote end address of this tunnel. |
| INE jnxL2tpTunnelStatsRemoteUdpPort | 1.3.6.1.4.1.2636.3.49.1.1.3.1.7 | InetPortNumber | read-only | This object contains the remote end UDP port of this tunnel. |
| G32 jnxL2tpTunnelStatsActiveSessions | 1.3.6.1.4.1.2636.3.49.1.1.3.1.8 | Gauge32 | read-only | This object contains the total number of sessions in the established state for this tunnel. |
| INT jnxL2tpTunnelStatsState | 1.3.6.1.4.1.2636.3.49.1.1.3.1.9 | INTEGER | read-only | This field contains the current state of the control tunnel - one of the internal tunnel state names as described below: cc_responder_accept_new The tunnel has received and accepted the start control connection request (SCCRQ) cc_responder_reject_new The tunnel has received and rejected the SCCRQ cc_responder_idle The tunnel has just been created cc_responder_wait_ctl_conn The tunnel has sent the start control connection response (SCCRP) and is waiting for the start control connection connected (SCCCN) message cleanup The tunnel is being cleaned up closed The tunnel is being closed destroyed The tunnel is being destroyed established The tunnel is operating terminate The tunnel is terminating Unknown The tunnel is not connected to the router. |
| IPt jnxL2tpTunnelStatsLocalIpAddrType | 1.3.6.1.4.1.2636.3.49.1.1.3.1.10 | InetAddressType | read-only | This object contains the type of the local end address of this tunnel. |
| IP jnxL2tpTunnelStatsLocalIpAddress | 1.3.6.1.4.1.2636.3.49.1.1.3.1.11 | InetAddress | read-only | This object contains the local end address of this tunnel. |
| INE jnxL2tpTunnelStatsLocalUdpPort | 1.3.6.1.4.1.2636.3.49.1.1.3.1.12 | InetPortNumber | read-only | This object contains the local end UDP port of this tunnel. |
| STR jnxL2tpTunnelStatsLocalHostName | 1.3.6.1.4.1.2636.3.49.1.1.3.1.13 | SnmpAdminString | read-only | This object contains the local host name of this tunnel. |
| STR jnxL2tpTunnelStatsRemoteHostName | 1.3.6.1.4.1.2636.3.49.1.1.3.1.14 | SnmpAdminString | read-only | This object contains the host name as discovered during the tunnel establishment phase (via the Host Name AVP) of the L2TP peer. If the tunnel is idle this object should maintain its value from the last time it was connected. |
| I32 jnxL2tpTunnelMaxSessions | 1.3.6.1.4.1.2636.3.49.1.1.3.1.15 | Integer32 | read-only | This object represents the maximum number of sessions configured on this tunnel. It could be any positive number or unlimited (0). |
| I32 jnxL2tpTunnelStatsWindowSize | 1.3.6.1.4.1.2636.3.49.1.1.3.1.16 | Integer32 | read-only | This object contains the send window size for this tunnel. |
| I32 jnxL2tpTunnelStatsHelloInterval | 1.3.6.1.4.1.2636.3.49.1.1.3.1.17 | Integer32 | read-only | This object contains the hello interval for this tunnel. |
| DAT jnxL2tpTunnelStatsCreationTime | 1.3.6.1.4.1.2636.3.49.1.1.3.1.18 | DateAndTime | read-only | This object represents the time of creation of this tunnel. |
| TIK jnxL2tpTunnelStatsUpTime | 1.3.6.1.4.1.2636.3.49.1.1.3.1.19 | TimeTicks | read-only | This object represents the time elapsed since this tunnel was established. |
| TIK jnxL2tpTunnelStatsIdleTime | 1.3.6.1.4.1.2636.3.49.1.1.3.1.20 | TimeTicks | read-only | This object represents the time elapsed since this tunnel had last data activity (transmission or reception). |
| DAT jnxL2tpTunnelStatsCollectionStart | 1.3.6.1.4.1.2636.3.49.1.1.3.1.21 | DateAndTime | read-only | This object represents the time at which the statistics gathering started for this tunnel. |
| C32 jnxL2tpTunnelStatsControlTxPktsEx | 1.3.6.1.4.1.2636.3.49.1.1.3.1.22 | Counter32 | read-only | This object contains the number of control packets that were transmitted to the tunnel peer. |
| C64 jnxL2tpTunnelStatsControlTxBytes | 1.3.6.1.4.1.2636.3.49.1.1.3.1.23 | Counter64 | read-only | This object contains the number of control bytes that were transmitted to the tunnel peer. This is deprecated and replaced by jnxL2tpTunnelStatsControlTxBytes32 |
| C32 jnxL2tpTunnelStatsControlRxPkts | 1.3.6.1.4.1.2636.3.49.1.1.3.1.24 | Counter32 | read-only | This object contains the number of control packets received on the tunnel. |
| C64 jnxL2tpTunnelStatsControlRxBytes | 1.3.6.1.4.1.2636.3.49.1.1.3.1.25 | Counter64 | read-only | This object contains the number of control bytes that were received from the tunnel peer. This has been deprecated and replaced by jnxL2tpTunnelStatsControlRxBytes32 |
| C32 jnxL2tpTunnelStatsDataTxPkts | 1.3.6.1.4.1.2636.3.49.1.1.3.1.26 | Counter32 | read-only | This object contains the number of data packets transmitted to the tunnel. This has been deprecated and replaced by jnxL2tpTunnelStatsDataTxPkts64 |
| C64 jnxL2tpTunnelStatsDataTxBytes | 1.3.6.1.4.1.2636.3.49.1.1.3.1.27 | Counter64 | read-only | This object contains the number of data bytes that were transmitted to the tunnel peer. |
| C32 jnxL2tpTunnelStatsDataRxPkts | 1.3.6.1.4.1.2636.3.49.1.1.3.1.28 | Counter32 | read-only | This object contains the number of data packets received from this tunnel. This is deprecated and replaced by jnxL2tpTunnelStatsDataRxPkts64 |
| C64 jnxL2tpTunnelStatsDataRxBytes | 1.3.6.1.4.1.2636.3.49.1.1.3.1.29 | Counter64 | read-only | This object contains the number of data bytes that were received from the tunnel peer. |
| C32 jnxL2tpTunnelStatsErrorTxPkts | 1.3.6.1.4.1.2636.3.49.1.1.3.1.30 | Counter32 | read-only | This object contains the number of error transmit packets on the tunnel. |
| C32 jnxL2tpTunnelStatsErrorRxPkts | 1.3.6.1.4.1.2636.3.49.1.1.3.1.31 | Counter32 | read-only | This object contains the number of error receive packets on the tunnel. |
| C32 jnxL2tpTunnelStatsControlTxBytes32 | 1.3.6.1.4.1.2636.3.49.1.1.3.1.32 | Counter32 | read-only | This object contains the number of control bytes that were transmitted to the tunnel peer. |
| C32 jnxL2tpTunnelStatsControlRxBytes32 | 1.3.6.1.4.1.2636.3.49.1.1.3.1.33 | Counter32 | read-only | This object contains the number of control bytes that were received from the tunnel peer. |
| C64 jnxL2tpTunnelStatsDataTxPkts64 | 1.3.6.1.4.1.2636.3.49.1.1.3.1.34 | Counter64 | read-only | This object contains the number of data packets transmitted to the tunnel. |
| C64 jnxL2tpTunnelStatsDataRxPkts64 | 1.3.6.1.4.1.2636.3.49.1.1.3.1.35 | Counter64 | read-only | This object contains the number of data packets received from this tunnel. |
| jnxL2tpSessionStatsTable | 1.3.6.1.4.1.2636.3.49.1.1.4 | not-accessible | The L2TP session status and statistics table. This table contains the objects that can be used to describe the current status and statistics of a single L2TP tunneled session. | |
| jnxL2tpSessionStatsEntry | 1.3.6.1.4.1.2636.3.49.1.1.4.1 | not-accessible | An L2TP session interface stats entry. | |
| I32 jnxL2tpSessionStatsLocalTID | 1.3.6.1.4.1.2636.3.49.1.1.4.1.1 | Integer32 | not-accessible | This object contains the local tunnel Identifier. |
| I32 jnxL2tpSessionStatsLocalSID | 1.3.6.1.4.1.2636.3.49.1.1.4.1.2 | Integer32 | not-accessible | This object contains the local session Identifier. |
| STR jnxL2tpSessionStatsServiceInterface | 1.3.6.1.4.1.2636.3.49.1.1.4.1.3 | SnmpAdminString | read-only | This object contains the name of the service interface on which this session is being hosted. |
| STR jnxL2tpSessionStatsTunnelGroup | 1.3.6.1.4.1.2636.3.49.1.1.4.1.4 | SnmpAdminString | read-only | This object contains the name of the tunnel group that this session is part of. |
| I32 jnxL2tpSessionStatsRemoteSID | 1.3.6.1.4.1.2636.3.49.1.1.4.1.5 | Integer32 | read-only | This object contains the remote end assigned session identifier for this session. When a session is starting this value may be zero until the remote tunnel endpoint has responded. |
| I32 jnxL2tpSessionStatsInterfaceUnit | 1.3.6.1.4.1.2636.3.49.1.1.4.1.6 | Integer32 | read-only | This object contains the interface unit number corresponding to the logical service interface on which the session is being hosted. |
| INT jnxL2tpSessionStatsEncapType | 1.3.6.1.4.1.2636.3.49.1.1.4.1.7 | INTEGER | read-only | This object contains the tunnel encapsulation type. |
| I32 jnxL2tpSessionStatsBundleID | 1.3.6.1.4.1.2636.3.49.1.1.4.1.8 | Integer32 | read-only | This object identifies the bundle that this session is a link of. This field is valid only for tunnel encapsulation type multilink-ppp. |
| INT jnxL2tpSessionStatsState | 1.3.6.1.4.1.2636.3.49.1.1.4.1.9 | INTEGER | read-only | This field contains the current state of the session - one of the internal session related state names as described below: established The session is operating closed The session is being closed destroyed The session is being destroyed cleanup The session is being cleaned up lns_ic_accept_new A new session is being accepted lns_ic_idle The session has been created and is idle lns_ic_reject_new The new session is being rejected lns_ic_wait_connect The session is waiting for the peer's incoming call connected (ICCN) message. |
| STR jnxL2tpSessionStatsUserName | 1.3.6.1.4.1.2636.3.49.1.1.4.1.10 | SnmpAdminString | read-only | This object identifies the peer session name on this interface. This is typically the login name of the remote user. If the user name is unknown to the local tunnel peer then this object will contain a null string. |
| INT jnxL2tpSessionStatsMode | 1.3.6.1.4.1.2636.3.49.1.1.4.1.11 | INTEGER | read-only | This object identifies the configured mode value for this session. |
| IPt jnxL2tpSessionStatsLocalAddrType | 1.3.6.1.4.1.2636.3.49.1.1.4.1.12 | InetAddressType | read-only | This object contains the type of the local end address of the tunnel that is hosting this session. |
| IP jnxL2tpSessionStatsLocalAddress | 1.3.6.1.4.1.2636.3.49.1.1.4.1.13 | InetAddress | read-only | This object contains the local end address of the tunnel that is hosting this session. |
| INE jnxL2tpSessionStatsLocalUdpPort | 1.3.6.1.4.1.2636.3.49.1.1.4.1.14 | InetPortNumber | read-only | This object contains the UDP port of the local end of the tunnel that is hosting this session. |
| IPt jnxL2tpSessionStatsRemoteAddrType | 1.3.6.1.4.1.2636.3.49.1.1.4.1.15 | InetAddressType | read-only | This object contains the type of the remote end address of the tunnel hosting this session. |
| IP jnxL2tpSessionStatsRemoteAddress | 1.3.6.1.4.1.2636.3.49.1.1.4.1.16 | InetAddress | read-only | This object contains the remote end address of the tunnel hosting this session. |
| INE jnxL2tpSessionStatsRemoteUdpPort | 1.3.6.1.4.1.2636.3.49.1.1.4.1.17 | InetPortNumber | read-only | This object contains the UDP port of the remote end of the tunnel hosting this session. |
| STR jnxL2tpSessionStatsLocalHostName | 1.3.6.1.4.1.2636.3.49.1.1.4.1.18 | SnmpAdminString | read-only | This object contains the local host name of the tunnel that is hosting this session. |
| STR jnxL2tpSessionStatsRemoteHostName | 1.3.6.1.4.1.2636.3.49.1.1.4.1.19 | SnmpAdminString | read-only | This object contains the host name as discovered during the tunnel establishment phase (via the Host Name AVP) of the L2TP peer. |
| IPt jnxL2tpSessionAssignedIpAddrType | 1.3.6.1.4.1.2636.3.49.1.1.4.1.20 | InetAddressType | read-only | This object contains the type of IP address of PPP client being tunneled as obtained from IPCP configuration during session establishment. |
| IP jnxL2tpSessionAssignedIpAddress | 1.3.6.1.4.1.2636.3.49.1.1.4.1.21 | InetAddress | read-only | This object contains the IP address of the PPP client being tunneled as obtained from IPCP configuration during session establishment. |
| INT jnxL2tpSessionLocalMRU | 1.3.6.1.4.1.2636.3.49.1.1.4.1.22 | INTEGER | read-only | The current value of the MRU for the local PPP Entity. This value is the MRU that the remote entity is using when sending packets to this session. |
| INT jnxL2tpSessionRemoteMRU | 1.3.6.1.4.1.2636.3.49.1.1.4.1.23 | INTEGER | read-only | The current value of the MRU for the remote PPP Entity. This value is the MRU that the local entity is using when sending packets to the remote PPP client. |
| U32 jnxL2tpSessionStatsTxSpeed | 1.3.6.1.4.1.2636.3.49.1.1.4.1.24 | Unsigned32 | read-only | This object returns the last known transmit baud rate for this session. |
| U32 jnxL2tpSessionStatsRxSpeed | 1.3.6.1.4.1.2636.3.49.1.1.4.1.25 | Unsigned32 | read-only | This object returns the last known receive baud rate for this session established. |
| INT jnxL2tpSessionStatsCallBearerType | 1.3.6.1.4.1.2636.3.49.1.1.4.1.26 | INTEGER | read-only | This object describes the bearer type of this session. |
| INT jnxL2tpSessionStatsFramingType | 1.3.6.1.4.1.2636.3.49.1.1.4.1.27 | INTEGER | read-only | This object describes the framing type of this session. |
| INT jnxL2tpSessionStatsLCPRenegotiation | 1.3.6.1.4.1.2636.3.49.1.1.4.1.28 | INTEGER | read-only | This object returns whether LCP renegotiation is on or off for this session. |
| INT jnxL2tpSessionStatsAuthMethod | 1.3.6.1.4.1.2636.3.49.1.1.4.1.29 | INTEGER | read-only | This object contains the proxy authentication method employed by the LAC for the session. |
| IPt jnxL2tpSessionStatsNasIpAddrType | 1.3.6.1.4.1.2636.3.49.1.1.4.1.30 | InetAddressType | read-only | This object contains the type of IP address of the RADIUS network address server to which the accounting records for this session are being sent to. |
| IP jnxL2tpSessionStatsNasIpAddress | 1.3.6.1.4.1.2636.3.49.1.1.4.1.31 | InetAddress | read-only | This object contains the IP address of the RADIUS network address server to which the accounting records for this session are being sent to. |
| INE jnxL2tpSessionStatsNasIpPort | 1.3.6.1.4.1.2636.3.49.1.1.4.1.32 | InetPortNumber | read-only | This object contains the port on which RADIUS network address server accounting messages will be sent. |
| INT jnxL2tpSessionStatsFramedProtocol | 1.3.6.1.4.1.2636.3.49.1.1.4.1.33 | INTEGER | read-only | This object contains the frame protocol attribute obtained from RADIUS server for this session. |
| IPt jnxL2tpSessionStatsFramedIpAddrType | 1.3.6.1.4.1.2636.3.49.1.1.4.1.34 | InetAddressType | read-only | This Attribute indicates the type of address to be configured for the user, as provided by the RADIUS server in response to authentication request. |
| IP jnxL2tpSessionStatsFramedIpAddress | 1.3.6.1.4.1.2636.3.49.1.1.4.1.35 | InetAddress | read-only | This Attribute indicates the address to be configured for the user, as provided by the RADIUS server in response to authentication request. |
| STR jnxL2tpSessionStatsCallingStationID | 1.3.6.1.4.1.2636.3.49.1.1.4.1.36 | SnmpAdminString | read-only | This Attribute allows the RADIUS NAS to send in the Access-Request packet the phone number that the call came from, using Automatic Number Identification (ANI) or similar technology. It is only used in Access-Request packets. |
| STR jnxL2tpSessionStatsCalledStationID | 1.3.6.1.4.1.2636.3.49.1.1.4.1.37 | SnmpAdminString | read-only | This Attribute allows the RADIUS NAS to send in the Access-Request packet the phone number that the user called, using Dialed Number Identification (DNIS) or similar technology. It is only used in Access-Request packets. |
| I32 jnxL2tpSessionStatsAcctDelayTime | 1.3.6.1.4.1.2636.3.49.1.1.4.1.38 | Integer32 | read-only | This attribute indicates how many seconds the RADIUS accounting client has been trying to send a record for, and can be subtracted from the time of arrival on the server to find the approximate time of the event generating this Accounting-Request. |
| STR jnxL2tpSessionStatsAcctSessionID | 1.3.6.1.4.1.2636.3.49.1.1.4.1.39 | SnmpAdminString | read-only | This attribute is a unique Accounting ID to make it easy to match start and stop records in a log file. |
| INT jnxL2tpSessionStatsAcctMethod | 1.3.6.1.4.1.2636.3.49.1.1.4.1.40 | INTEGER | read-only | This object contains the accounting method employed for this session. |
| G32 jnxL2tpSessionStatsAcctSessionTime | 1.3.6.1.4.1.2636.3.49.1.1.4.1.41 | Gauge32 | read-only | This attribute indicates how many seconds the user has received service for. |
| INT jnxL2tpSessionStatsAcctNasPortType | 1.3.6.1.4.1.2636.3.49.1.1.4.1.42 | INTEGER | read-only | This Attribute indicates the type of the physical port of the NAS which is performing accounting for the user. |
| I32 jnxL2tpSessionStatsAcctTnlClientEndPoint | 1.3.6.1.4.1.2636.3.49.1.1.4.1.43 | Integer32 | read-only | This object contains the remote tunnel Identifier of the tunnel hosting this session. |
| I32 jnxL2tpSessionStatsAcctTnlServerEndPoint | 1.3.6.1.4.1.2636.3.49.1.1.4.1.44 | Integer32 | read-only | This object contains the local tunnel Identifier of the tunnel hosting this session. |
| STR jnxL2tpSessionStatsAcctTnlClientAuthID | 1.3.6.1.4.1.2636.3.49.1.1.4.1.45 | SnmpAdminString | read-only | This object contains the host name as discovered during the tunnel establishment phase (via the Host Name AVP) of the L2TP peer, for the tunnel that is hosting this session. |
| STR jnxL2tpSessionStatsAcctTnlServerAuthID | 1.3.6.1.4.1.2636.3.49.1.1.4.1.46 | SnmpAdminString | read-only | This object contains the local host name of the tunnel that is hosting this session. |
| STR jnxL2tpSessionStatsUserProfileName | 1.3.6.1.4.1.2636.3.49.1.1.4.1.47 | SnmpAdminString | read-only | This object contains the configured access profile name that is being used for this session. |
| STR jnxL2tpSessionStatsInterfaceID | 1.3.6.1.4.1.2636.3.49.1.1.4.1.48 | SnmpAdminString | read-only | This object contains the interface identification (name) for the session bearing service interface. |
| U32 jnxL2tpSessionStatsCallSerialNumber | 1.3.6.1.4.1.2636.3.49.1.1.4.1.49 | Unsigned32 | read-only | This object contains the serial number that has been assigned to this session. |
| DAT jnxL2tpSessionStatsCreationTime | 1.3.6.1.4.1.2636.3.49.1.1.4.1.50 | DateAndTime | read-only | This object represents the time of creation of this session. |
| TIK jnxL2tpSessionStatsUpTime | 1.3.6.1.4.1.2636.3.49.1.1.4.1.51 | TimeTicks | read-only | This object represents the time elapsed since this session was established. |
| TIK jnxL2tpSessionStatsIdleTime | 1.3.6.1.4.1.2636.3.49.1.1.4.1.52 | TimeTicks | read-only | This object represents the time elapsed since this session had last data activity (transmission or reception). |
| DAT jnxL2tpSessionStatsCollectionStart | 1.3.6.1.4.1.2636.3.49.1.1.4.1.53 | DateAndTime | read-only | This object represents the time at which the statistics gathering started for this session. |
| C32 jnxL2tpSessionStatsControlTxPkts | 1.3.6.1.4.1.2636.3.49.1.1.4.1.54 | Counter32 | read-only | This object contains the number of control packets that were transmitted to the session peer. |
| C64 jnxL2tpSessionStatsControlTxBytes | 1.3.6.1.4.1.2636.3.49.1.1.4.1.55 | Counter64 | read-only | This object contains the number of control bytes that were transmitted to the session peer. This is deprecated and replaced by jnxL2tpSessionStatsControlTxBytes32 |
| C32 jnxL2tpSessionStatsControlRxPkts | 1.3.6.1.4.1.2636.3.49.1.1.4.1.56 | Counter32 | read-only | This object contains the number of control packets received on the session. |
| C64 jnxL2tpSessionStatsControlRxBytes | 1.3.6.1.4.1.2636.3.49.1.1.4.1.57 | Counter64 | read-only | This object contains the number of control bytes that were received from the session peer. This is deprecated and replaced by jnxL2tpSessionStatsControlRxBytes32 |
| C32 jnxL2tpSessionStatsDataTxPkts | 1.3.6.1.4.1.2636.3.49.1.1.4.1.58 | Counter32 | read-only | This object contains the number of data packets transmitted to the remote session peer. This is deprecated and replaced by jnxL2tpSessionStatsDataTxPkts64 |
| C64 jnxL2tpSessionStatsDataTxBytes | 1.3.6.1.4.1.2636.3.49.1.1.4.1.59 | Counter64 | read-only | This object contains the number of data bytes that were transmitted to the session peer. |
| C32 jnxL2tpSessionStatsDataRxPkts | 1.3.6.1.4.1.2636.3.49.1.1.4.1.60 | Counter32 | read-only | This object contains the number of data packets received on this session. This is deprecated and replaced by jnxL2tpSessionStatsDataRxPkts64 |
| C64 jnxL2tpSessionStatsDataRxBytes | 1.3.6.1.4.1.2636.3.49.1.1.4.1.61 | Counter64 | read-only | This object contains the number of data bytes that were received from the session peer. |
| C32 jnxL2tpSessionStatsErrorTxPkts | 1.3.6.1.4.1.2636.3.49.1.1.4.1.62 | Counter32 | read-only | This object contains the number of error transmit packets on the session. |
| C32 jnxL2tpSessionStatsErrorRxPkts | 1.3.6.1.4.1.2636.3.49.1.1.4.1.63 | Counter32 | read-only | This object contains the number of error receive packets on the session. |
| C32 jnxL2tpSessionStatsControlTxBytes32 | 1.3.6.1.4.1.2636.3.49.1.1.4.1.64 | Counter32 | read-only | This object contains the number of control bytes that were transmitted to the session peer. |
| C32 jnxL2tpSessionStatsControlRxBytes32 | 1.3.6.1.4.1.2636.3.49.1.1.4.1.65 | Counter32 | read-only | This object contains the number of control bytes that were received from the session peer. |
| C64 jnxL2tpSessionStatsDataTxPkts64 | 1.3.6.1.4.1.2636.3.49.1.1.4.1.66 | Counter64 | read-only | This object contains the number of data packets transmitted to the remote session peer. |
| C64 jnxL2tpSessionStatsDataRxPkts64 | 1.3.6.1.4.1.2636.3.49.1.1.4.1.67 | Counter64 | read-only | This object contains the number of data packets received on this session. |
| jnxL2tpMlpppBundleStatsTable | 1.3.6.1.4.1.2636.3.49.1.1.5 | not-accessible | The L2TP MLPPP bundle status and statistics table. This table contains the objects that can be used to describe the current status and statistics of a single L2TP tunneled multilink PPP bundle. | |
| jnxL2tpMlpppBundleStatsEntry | 1.3.6.1.4.1.2636.3.49.1.1.5.1 | not-accessible | An L2TP MLPPP bundle statistics entry. | |
| I32 jnxL2tpMlpppBundleStatsBundleID | 1.3.6.1.4.1.2636.3.49.1.1.5.1.1 | Integer32 | not-accessible | This object identifies the session's associated bundle. |
| I32 jnxL2tpMlpppBundleStatsNumLinks | 1.3.6.1.4.1.2636.3.49.1.1.5.1.2 | Integer32 | read-only | This object identifies the current number of links that have joined the bundle. |
| STR jnxL2tpMlpppBundleStatsEndpoint | 1.3.6.1.4.1.2636.3.49.1.1.5.1.3 | SnmpAdminString | read-only | This object identifies the username of the MLPPP bundle. |
| I32 jnxL2tpMlpppBundleStatsInputMrru | 1.3.6.1.4.1.2636.3.49.1.1.5.1.4 | Integer32 | read-only | This object identifies the maximum packet size that the input inteface can process. |
| I32 jnxL2tpMlpppBundleStatsOutputMrru | 1.3.6.1.4.1.2636.3.49.1.1.5.1.5 | Integer32 | read-only | This object identifies the maximum packet size that the output interface can process. |
RFC description
Monitoring for Layer Two Transport Protocol (L2TP) tunnels and sessions on Juniper routers based on RFC 3371.
Start monitoring Juniper Networks router (LAC/LNS L2TP endpoint) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.