JUNIPER-COLLECTOR-MIB

All MIBs › JUNIPER-COLLECTOR-MIB

Organization: Juniper Networks, Inc.

Last Updated: 2003-11-13

Category: Technology: Network Monitoring, Vendor: Juniper

Description: Defines managed objects for the Juniper Networks traffic and statistics collector service, supporting data export to external analysis systems.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is JUNIPER-COLLECTOR-MIB?

JUNIPER-COLLECTOR-MIB is a Juniper Networks proprietary MIB defining managed objects for the traffic and statistics Collector PICs (Physical Interface Cards) on Juniper routers, supporting export of flow/traffic data to external analysis systems. It exposes objects intended to describe the state and configuration of each Collector PIC installed in the router. In a monitoring context it would be used to confirm that a Collector PIC is present, operational, and actively exporting statistics, which is important for ensuring downstream traffic-analysis or billing systems continue receiving data; a failed or absent collector would show up as missing or degraded status here. It is a Juniper-specific hardware-module MIB likely layered conceptually on the general Juniper chassis/PIC inventory framework (e.g. JUNIPER-CHASSIS-DEFINES-MIB) though no explicit import is confirmed from the available data. It is typically deployed on Juniper routers equipped with dedicated Collector PICs used for network traffic monitoring, sampling, and export in service-provider backbones, where JUNIPER-COLLECTOR-MIB SNMP monitoring confirms each Collector PIC remains operational and actively exporting data.

IPNetwork Monitor allows you to monitor SNMP objects defined in JUNIPER-COLLECTOR-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Juniper Networks router with Collector PIC

Monitoring Examples

No concrete object or table names were supplied for this module (sample_objects is empty), so a specific polling scenario naming real objects cannot be honestly constructed from the available data. In general an operator would expect a per-PIC table reporting collector status and export statistics, but no specific object names can be confirmed here.

Imported Objects

From HCNUM-TC

CounterBasedGauge64

From IF-MIB

ifDescr	OBJECT-TYPE
ifIndex	OBJECT-TYPE

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From JUNIPER-SMI

jnxCollectorNotifications	OBJECT-IDENTITY
jnxMibs	OBJECT-IDENTITY

From SNMPv2-SMI

Counter64
Gauge32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY
OBJECT-TYPE
TimeTicks

From SNMPv2-TC

DateAndTime
DisplayString
TEXTUAL-CONVENTION

How to Use in IPNetwork Monitor

Example using jnxCollGlobalCreatedFiles OID:

Select a Juniper Networks router with Collector PIC (traffic/statistics export) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type jnxCollGlobalCreatedFiles into the Find box to locate it in the OID tree, then select it and click OK. The total number of file created by all the collector pics on the router since the last time the router was reset. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
jnxCollectorMIB	1.3.6.1.4.1.2636.3.28			Provides data about each of the Collector PICs on a router.
G32 jnxCollFileBlocks	1.3.6.1.4.1.2636.3.28.3.1.12	Gauge32	read-only	The number of blocks in this file.
G32 jnxCollFileCompBlocks	1.3.6.1.4.1.2636.3.28.3.1.14	Gauge32	read-only	The number of compressed blocks in this file.
G32 jnxCollFileCompByteRate	1.3.6.1.4.1.2636.3.28.3.1.10	Gauge32	read-only	The number of compressed bytes per second added to this file, measured during the current 10 second interval.
NUM jnxCollFileCompBytes	1.3.6.1.4.1.2636.3.28.3.1.9	CounterBasedGauge64	read-only	The number of compressed bytes in this file.
jnxCollFileEntry	1.3.6.1.4.1.2636.3.28.3.1		not-accessible	Each entry provides information about a single file currently open on this Collector PIC. Each Collector PIC File is identified by the ifIndex associated with the Collector PIC and the name of the file.
STR jnxCollFileFname	1.3.6.1.4.1.2636.3.28.3.1.2	DisplayString	read-only	The name of a Collector File on this Collector PIC. This object is included for those NM applications that can't parse the file name from the instance portion of the OIDs and provides the value of jnxCollFileName explicitly.
STR jnxCollFileName	1.3.6.1.4.1.2636.3.28.3.1.1	DisplayString	not-accessible	The name of a Collector File on this Collector PIC.
G32 jnxCollFilePeakCompByteRate	1.3.6.1.4.1.2636.3.28.3.1.11	Gauge32	read-only	The peak number of compressed bytes per second added to this file.
G32 jnxCollFilePeakRecordRate	1.3.6.1.4.1.2636.3.28.3.1.5	Gauge32	read-only	The peak number of flow records per second added to this file.
G32 jnxCollFilePeakUncompByteRate	1.3.6.1.4.1.2636.3.28.3.1.8	Gauge32	read-only	The peak number of uncompressed bytes per second added to this file.
G32 jnxCollFileRecordRate	1.3.6.1.4.1.2636.3.28.3.1.4	Gauge32	read-only	The number of flow records per second added to this file, measured during the current 10 second interval.
NUM jnxCollFileRecords	1.3.6.1.4.1.2636.3.28.3.1.3	CounterBasedGauge64	read-only	The number of flow records in this file.
INT jnxCollFileState	1.3.6.1.4.1.2636.3.28.3.1.16	INTEGER	read-only	The current state of this file.
jnxCollFileTable	1.3.6.1.4.1.2636.3.28.3		not-accessible	Data about each collector file currently present on the router.
G32 jnxCollFileTransferAttempts	1.3.6.1.4.1.2636.3.28.3.1.15	Gauge32	read-only	The number of FTP transfer attempts for this file.
G32 jnxCollFileUncompByteRate	1.3.6.1.4.1.2636.3.28.3.1.7	Gauge32	read-only	The number of uncompressed bytes per second added to this file.
NUM jnxCollFileUncompBytes	1.3.6.1.4.1.2636.3.28.3.1.6	CounterBasedGauge64	read-only	The number of uncompressed bytes in this file.
NTF jnxCollFlowOverload	1.3.6.1.4.1.2636.4.8.0.4			This indicates a soft or hard flow overload condition has been triggered.
NTF jnxCollFlowOverloadCleared	1.3.6.1.4.1.2636.4.8.0.5			This indicates a soft or hard flow overload condition has been cleared.
NTF jnxCollFtpSwitchover	1.3.6.1.4.1.2636.4.8.0.8			This indicates an FTP server switchover has occurred.
C64 jnxCollGlobalCreatedFilesEx	1.3.6.1.4.1.2636.3.28.1.1	Counter64	read-only	The total number of file created by all the collector pics on the router since the last time the router was reset.
C64 jnxCollGlobalOpenFiles	1.3.6.1.4.1.2636.3.28.1.2	Counter64	read-only	The total number of open collector files currently present on the router.
jnxCollGlobalStats	1.3.6.1.4.1.2636.3.28.1			Global, router-wide collector stats.
NTF jnxCollMemoryAvailable	1.3.6.1.4.1.2636.4.8.0.7			This indicates a memory unavailable condition has been cleared.
NTF jnxCollMemoryUnavailable	1.3.6.1.4.1.2636.4.8.0.6			This indicates a memory unavailable condition has been triggered.
jnxCollNotificationPrefix	1.3.6.1.4.1.2636.4.8.0			All collector notifications are registered under this branch.
DAT jnxCollNotifyDate	1.3.6.1.4.1.2636.3.28.4.13	DateAndTime	accessible-for-notify	Provides the current system date and time.
STR jnxCollNotifyError	1.3.6.1.4.1.2636.3.28.4.4	DisplayString	accessible-for-notify	Description of error encountered when trying to transfer a file.
STR jnxCollNotifyFile	1.3.6.1.4.1.2636.3.28.4.5	DisplayString	accessible-for-notify	Identifies a specific file for notifications that refer to a file.
IP jnxCollNotifyFromFtpServerInetAddress	1.3.6.1.4.1.2636.3.28.4.15	InetAddress	accessible-for-notify	The FTP server address from which the switchover occurs.
IPt jnxCollNotifyFromFtpServerInetType	1.3.6.1.4.1.2636.3.28.4.14	InetAddressType	accessible-for-notify	Used with jnxCollNotifyFromFtpServerInetAddress to identify a specific FTP server address.
INT jnxCollNotifyFromFtpServerType	1.3.6.1.4.1.2636.3.28.4.16	INTEGER	accessible-for-notify	The FTP server Type from which the switchover occurs.
STR jnxCollNotifyFtpErrorText	1.3.6.1.4.1.2636.3.28.4.7	DisplayString	accessible-for-notify	Provides the FTP error text for file transfer notifications.
I32 jnxCollNotifyFtpResultCode	1.3.6.1.4.1.2636.3.28.4.6	Integer32	accessible-for-notify	Provides the FTP result code for file transfer notifications.
IP jnxCollNotifyInetAddress	1.3.6.1.4.1.2636.3.28.4.3	InetAddress	accessible-for-notify	Used with jnxCollNotifyInetType to identify a specific file transfer destination.
IPt jnxCollNotifyInetType	1.3.6.1.4.1.2636.3.28.4.2	InetAddressType	accessible-for-notify	Used with jnxCollNotifyInetAddress to identify a specific file transfer destination.
INT jnxCollNotifyInitiatedBy	1.3.6.1.4.1.2636.3.28.4.20	INTEGER	accessible-for-notify	Identify what initiates the FTP switchover.
G32 jnxCollNotifyMemFree	1.3.6.1.4.1.2636.3.28.4.9	Gauge32	accessible-for-notify	Provides the current amount of free memory for pic overload notifications.
G32 jnxCollNotifyMemThresh	1.3.6.1.4.1.2636.3.28.4.10	Gauge32	accessible-for-notify	Provides the current memory threshold used for determining memory unavailable conditions.
G32 jnxCollNotifyMemUtil	1.3.6.1.4.1.2636.3.28.4.8	Gauge32	accessible-for-notify	Provides the current memory utilization for pic overload notifications.
G32 jnxCollNotifyNewRecordRate	1.3.6.1.4.1.2636.3.28.4.11	Gauge32	accessible-for-notify	Provides the current number of new records per second created on this Collector PIC.
INT jnxCollNotifyOverloadType	1.3.6.1.4.1.2636.3.28.4.12	INTEGER	accessible-for-notify	Identifies a specific type of flow overload condition on this Collector PIC.
IP jnxCollNotifyToFtpServerInetAddress	1.3.6.1.4.1.2636.3.28.4.18	InetAddress	accessible-for-notify	The FTP server address to which the switchover occurs.
IPt jnxCollNotifyToFtpServerInetType	1.3.6.1.4.1.2636.3.28.4.17	InetAddressType	accessible-for-notify	Used with jnxCollNotifyToFtpServerInetAddress to identify a specific FTP server address.
INT jnxCollNotifyToFtpServerType	1.3.6.1.4.1.2636.3.28.4.19	INTEGER	accessible-for-notify	The FTP server Type to which the switchover occurs.
STR jnxCollNotifyUrl	1.3.6.1.4.1.2636.3.28.4.1	DisplayString	accessible-for-notify	The URL associated with a file transfer destination.
jnxCollNotifyVars	1.3.6.1.4.1.2636.3.28.4			Notification object definitions.
G32 jnxCollPicIfCreatedFileRate	1.3.6.1.4.1.2636.3.28.2.1.2	Gauge32	read-only	The number of files created per second, measured over the current 10 second interval.
C64 jnxCollPicIfCreatedFiles	1.3.6.1.4.1.2636.3.28.2.1.1	Counter64	read-only	The total number of files created by this Collector PIC since the last time the PIC was reset.
JNX jnxCollPicIfCurrentState	1.3.6.1.4.1.2636.3.28.2.1.22	JnxCollPicStateDef	read-only	The current state of various error conditions on this Collector PIC.
G32 jnxCollPicIfDestroyedFileRate	1.3.6.1.4.1.2636.3.28.2.1.8	Gauge32	read-only	The number of files destroyed per second, as measured over the current 10 second interval.
C64 jnxCollPicIfDestroyedFiles	1.3.6.1.4.1.2636.3.28.2.1.7	Counter64	read-only	The total number of files destroyed by this Collector PIC.
jnxCollPicIfEntry	1.3.6.1.4.1.2636.3.28.2.1		not-accessible	Each entry provides information about a single Collector PIC. Each Collector PIC contains a single interface and is identified by its ifIndex.
G32 jnxCollPicIfExportedFileRate	1.3.6.1.4.1.2636.3.28.2.1.5	Gauge32	read-only	The number of files exported per second, measured over the current 10 second interval.
C64 jnxCollPicIfExportedFiles	1.3.6.1.4.1.2636.3.28.2.1.4	Counter64	read-only	The total number of files exported by this Collector PIC.
G32 jnxCollPicIfFtpByteRate	1.3.6.1.4.1.2636.3.28.2.1.16	Gauge32	read-only	The number of bytes per second transfered via FTP measured during the current 10 second interval.
C64 jnxCollPicIfFtpBytes	1.3.6.1.4.1.2636.3.28.2.1.15	Counter64	read-only	The total number of bytes transferred via FTP by this Collector PIC.
NUM jnxCollPicIfFtpFailures	1.3.6.1.4.1.2636.3.28.2.1.21	CounterBasedGauge64	read-only	The total number of FTP transfer failures on this Collector PIC.
G32 jnxCollPicIfFtpFileRate	1.3.6.1.4.1.2636.3.28.2.1.19	Gauge32	read-only	The number of files per second transferred via FTP.
C64 jnxCollPicIfFtpFiles	1.3.6.1.4.1.2636.3.28.2.1.18	Counter64	read-only	The total number of files transferred via FTP by this Collector PIC.
JNX jnxCollPicIfLastStateChange	1.3.6.1.4.1.2636.3.28.2.1.23	JnxCollPicStateDef	read-only	Identifies the error condition that last changed state.
NUM jnxCollPicIfMemoryFree	1.3.6.1.4.1.2636.3.28.2.1.14	CounterBasedGauge64	read-only	The amount of memory free, in bytes, on this Collector PIC.
NUM jnxCollPicIfMemoryUsed	1.3.6.1.4.1.2636.3.28.2.1.13	CounterBasedGauge64	read-only	The amount of memory used, in bytes, by this Collector PIC.
G32 jnxCollPicIfPeakCreatedFileRate	1.3.6.1.4.1.2636.3.28.2.1.3	Gauge32	read-only	The peak number of files created per second.
G32 jnxCollPicIfPeakDestroyedFileRate	1.3.6.1.4.1.2636.3.28.2.1.9	Gauge32	read-only	The peak number of files destroyed per second.
G32 jnxCollPicIfPeakExportedFileRate	1.3.6.1.4.1.2636.3.28.2.1.6	Gauge32	read-only	The peak number of files exported per second.
G32 jnxCollPicIfPeakFtpByteRate	1.3.6.1.4.1.2636.3.28.2.1.17	Gauge32	read-only	The peak number of bytes per second transferred via FTP.
G32 jnxCollPicIfPeakFtpFileRate	1.3.6.1.4.1.2636.3.28.2.1.20	Gauge32	read-only	The peak number of files per second transferred via FTP.
G32 jnxCollPicIfPeakProcRecordsRate	1.3.6.1.4.1.2636.3.28.2.1.12	Gauge32	read-only	The peak number of flow records processed.
C64 jnxCollPicIfProcRecords	1.3.6.1.4.1.2636.3.28.2.1.10	Counter64	read-only	The total number of flow records processed by this Collector PIC.
G32 jnxCollPicIfProcRecordsRate	1.3.6.1.4.1.2636.3.28.2.1.11	Gauge32	read-only	The number of flow records processed per seconds, measured during the current 10 second interval.
DAT jnxCollPicIfStateChangeDate	1.3.6.1.4.1.2636.3.28.2.1.25	DateAndTime	read-only	The system date and time when the management subsystem last learned of a change to the value of jnxCollPicIfCurrentState for this Collector PIC.
TIK jnxCollPicIfStateChangeTime	1.3.6.1.4.1.2636.3.28.2.1.24	TimeTicks	read-only	The value of sysUpTime when the management subsystem last learned of a change to the value of jnxCollPicIfCurrentState for this Collector PIC.
INT jnxCollPicIfStateChangeType	1.3.6.1.4.1.2636.3.28.2.1.26	INTEGER	read-only	This indicates whether the last state change set a new error condition or cleared an existing one.
jnxCollPicIfTable	1.3.6.1.4.1.2636.3.28.2		not-accessible	Data about each collector pic currently present on the router.
NTF jnxCollUnavailableDest	1.3.6.1.4.1.2636.4.8.0.1			Notification of an unavailable destination failure encountered while transferring a collector file.
NTF jnxCollUnavailableDestCleared	1.3.6.1.4.1.2636.4.8.0.2			This indicates a previous unavailable destination failure has been resolved.
NTF jnxCollUnsuccessfulTransfer	1.3.6.1.4.1.2636.4.8.0.3			This indicates an error was encountered while attempting a file transfer.

RFC description

Provides data about Collector PIC (Physical Interface Card) modules on Juniper routers for flow management.

Start monitoring Juniper Networks router with Collector PIC (traffic/statistics export) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download JUNIPER-COLLECTOR-MIB

What Is JUNIPER-COLLECTOR-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

How to Use in IPNetwork Monitor

RFC description