| OID symbolic | OID numeric | Type | Access | Description |
|---|
| jnxRpmMib | 1.3.6.1.4.1.2636.3.50.1 | | | This mib provides data associated with the Realtime Performance
Monitoring feature. |
| jnxRpmResultsSampleTable | 1.3.6.1.4.1.2636.3.50.1.1 | | not-accessible | This table provides measurements from the latest individual RPM
probe samples. Within each sample, the specific measurement type
is identified by jnxRpmResSampleType. Note, if the latest
probe was unsuccessful, no measurement types will be available.
See the definition of JnxRpmMeasurementType for details on
the types of measurements available. |
| jnxRpmResultsSampleEntry | 1.3.6.1.4.1.2636.3.50.1.1.1 | | not-accessible | Each entry provides a specific measurement type for a single
probe. |
| JNX jnxRpmResSampleType | 1.3.6.1.4.1.2636.3.50.1.1.1.1 | JnxRpmMeasurementType | not-accessible | This object identifies the specific measurement type returned
by jnxRpmResSampleValue. |
| I32 jnxRpmResSampleValue | 1.3.6.1.4.1.2636.3.50.1.1.1.2 | Integer32 | read-only | This object returns the measurement identified by the corresponding
jnxRpmResSampleType. |
| JNX jnxRpmResSampleTsType | 1.3.6.1.4.1.2636.3.50.1.1.1.3 | JnxRpmTimestampType | read-only | This object identifies the type of timestamp used to obtain this
measurement. |
| DAT jnxRpmResSampleDate | 1.3.6.1.4.1.2636.3.50.1.1.1.4 | DateAndTime | read-only | This object provides the date and time of when this measurement
was obtained. |
| jnxRpmResultsSummaryTable | 1.3.6.1.4.1.2636.3.50.1.2 | | not-accessible | This table provides a summary of the results for a specific
RPM entry (identified by pingCtlOwnerIndex/pingCtlTestName).
The scope of the summary is identified by jnxRpmResSumCollection. |
| jnxRpmResultsSummaryEntry | 1.3.6.1.4.1.2636.3.50.1.2.1 | | not-accessible | Each entry in the table provides a summary of the RPM results
over a single collection of probes. For each RPM entry, there
are several collections maintained: the current test, the
most recently completed test, a configurable number of the most
recent probes (aka 'moving average'), and a global collection
representing all the probes. Each entry in this table summarizes
the results for one of these collections. |
| JNX jnxRpmResSumCollection | 1.3.6.1.4.1.2636.3.50.1.2.1.1 | JnxRpmCollectionType | not-accessible | This object identifes the collection of probes over which the
summary data represented by the other objects in this table
applies. Note, if a collection type is not supported or not
configured, it will not be instantiated in this table. |
| U32 jnxRpmResSumSent | 1.3.6.1.4.1.2636.3.50.1.2.1.2 | Unsigned32 | read-only | This object provides the number of probes sent within the
collection identified by jnxRpmResSumCollection. |
| U32 jnxRpmResSumReceived | 1.3.6.1.4.1.2636.3.50.1.2.1.3 | Unsigned32 | read-only | This object provides the number of probes received within the
collection identified by jnxRpmResSumCollection. |
| U32 jnxRpmResSumPercentLost | 1.3.6.1.4.1.2636.3.50.1.2.1.4 | Unsigned32 | read-only | This object provides the percentage of probes lost within the
collection identified by jnxRpmResSumCollection. |
| DAT jnxRpmResSumDate | 1.3.6.1.4.1.2636.3.50.1.2.1.5 | DateAndTime | read-only | This object provides the date and time of when the most recent
probe within the collection identified by jnxRpmResSumCollection
was completed. |
| jnxRpmResultsCalculatedTable | 1.3.6.1.4.1.2636.3.50.1.3 | | not-accessible | This table provides a set of calculated values for each
RPM entry, for each collection of probes maintained within that
entry, and for each supported measurement set within that
collection of probes.
Note, not all collection types will be available for every
RPM Entry (identified by pingCtlOwnerIndex/pingCtlTestName).
The jitter calculations are available only for those RPM entries
that employ hardware timestamps. Further, the ingress & egress
calculations are available only for those probe types that
measure one-way delays or where hardware timestamps are
employed and the one-way-hardware timestamp knob is enabled.
In either case, the one-way delays must be less than the round
trip times, otherwise they are discarded.
Also, this table will skip over any measurement set for which
there are 0 samples. |
| jnxRpmResultsCalculatedEntry | 1.3.6.1.4.1.2636.3.50.1.3.1 | | not-accessible | |
| JNX jnxRpmResCalcSet | 1.3.6.1.4.1.2636.3.50.1.3.1.1 | JnxRpmMeasurementSet | not-accessible | This object identifies the measurement set upon which the
calculations returned by the other objects in this table are
based. |
| U32 jnxRpmResCalcSamples | 1.3.6.1.4.1.2636.3.50.1.3.1.2 | Unsigned32 | read-only | The number of samples used in this calculations. |
| U32 jnxRpmResCalcMin | 1.3.6.1.4.1.2636.3.50.1.3.1.3 | Unsigned32 | read-only | The minimum of all the samples in the collection and measurement
set associated with this row. Values are provided in units
of microseconds. |
| U32 jnxRpmResCalcMax | 1.3.6.1.4.1.2636.3.50.1.3.1.4 | Unsigned32 | read-only | The maximum of all the samples in the collection and measurement
set associated with this row. Values are provided in units
of microseconds. |
| U32 jnxRpmResCalcAverage | 1.3.6.1.4.1.2636.3.50.1.3.1.5 | Unsigned32 | read-only | The average of all the samples in the collection and measurement
set associated with this row. Values are provided in units
of microseconds. |
| U32 jnxRpmResCalcPkToPk | 1.3.6.1.4.1.2636.3.50.1.3.1.6 | Unsigned32 | read-only | The difference between the minimum and maximum of all the samples
in the collection and measurement set associated with this row.
Values are provided in units of microseconds. |
| U32 jnxRpmResCalcStdDev | 1.3.6.1.4.1.2636.3.50.1.3.1.7 | Unsigned32 | read-only | The standard deviation calculated over all the samples
in the collection and measurement set associated with this row.
Values are provided in units of microseconds. |
| NUM jnxRpmResCalcSum | 1.3.6.1.4.1.2636.3.50.1.3.1.8 | CounterBasedGauge64 | read-only | The sum of all the samples in the collection and measurement set
associated with this row. Values are provided in units of
microseconds. |
| jnxRpmHistorySampleTable | 1.3.6.1.4.1.2636.3.50.1.4 | | not-accessible | This table provides measurements for individual RPM probe samples.
In addition to the last completed sample, a configurable number of
the most recent samples are available as well. Within each sample,
the specific measurement type is identified by
jnxRpmHistSampleType. Note, if probe was unsuccessful, no
measurement types will be available for that history entry.
See the definition of JnxRpmMeasurementType for details on
the types of measurements available. |
| jnxRpmHistorySampleEntry | 1.3.6.1.4.1.2636.3.50.1.4.1 | | not-accessible | |
| JNX jnxRpmHistSampleType | 1.3.6.1.4.1.2636.3.50.1.4.1.1 | JnxRpmMeasurementType | not-accessible | This object identifies the specific measurement type returned
by jnxRpmHistSampleValue. |
| I32 jnxRpmHistSampleValue | 1.3.6.1.4.1.2636.3.50.1.4.1.2 | Integer32 | read-only | This object returns the measurement identified by the corresponding
jnxRpmHistSampleType. |
| JNX jnxRpmHistSampleTsType | 1.3.6.1.4.1.2636.3.50.1.4.1.3 | JnxRpmTimestampType | read-only | This object identifies the type of timestamp used to obtain this
measurement. |
| jnxRpmHistorySummaryTable | 1.3.6.1.4.1.2636.3.50.1.5 | | not-accessible | This table provides historical summary data for each collection
of probes within each RPM Entry, similar to the
jnxRpmResultsSummaryTable.
In addition to the current summary, this table provides the same
number of historical entries as the jnxRpmHistorySampleTable. |
| jnxRpmHistorySummaryEntry | 1.3.6.1.4.1.2636.3.50.1.5.1 | | not-accessible | |
| JNX jnxRpmHistSumCollection | 1.3.6.1.4.1.2636.3.50.1.5.1.1 | JnxRpmCollectionType | not-accessible | Identifies the collection of probes whose results are summarized by
this row.
At this time, historical summaries are available only for the
current test (currentTest(1)). |
| U32 jnxRpmHistSumSent | 1.3.6.1.4.1.2636.3.50.1.5.1.2 | Unsigned32 | read-only | This object provides the number of probes sent within the
collection identified by jnxRpmHistSumCollection. |
| U32 jnxRpmHistSumReceived | 1.3.6.1.4.1.2636.3.50.1.5.1.3 | Unsigned32 | read-only | This object provides the number of probes received within the
collection identified by jnxRpmHistSumCollection. |
| U32 jnxRpmHistSumPercentLost | 1.3.6.1.4.1.2636.3.50.1.5.1.4 | Unsigned32 | read-only | This object provides the percentage of probes lost within the
collection identified by jnxRpmHistSumCollection. |
| jnxRpmHistoryCalculatedTable | 1.3.6.1.4.1.2636.3.50.1.6 | | not-accessible | This table provides a set of calculated values for each
RPM entry, for each collection of probes maintained within that
entry, and for each supported calculated type within that
collection of probes, similar to the jnxRpmResultsCalculatedTable.
In addition to the current summary, this table provides the same
number of historical entries as the jnxRpmHistorySampleTable. |
| jnxRpmHistoryCalculatedEntry | 1.3.6.1.4.1.2636.3.50.1.6.1 | | not-accessible | |
| JNX jnxRpmHistCalcSet | 1.3.6.1.4.1.2636.3.50.1.6.1.1 | JnxRpmMeasurementSet | not-accessible | This object identifies the measurement set upon which the
calculations returned by the other objects in this table are
based. |
| U32 jnxRpmHistCalcSamples | 1.3.6.1.4.1.2636.3.50.1.6.1.2 | Unsigned32 | read-only | The number of samples used in this calculations. |
| U32 jnxRpmHistCalcMin | 1.3.6.1.4.1.2636.3.50.1.6.1.3 | Unsigned32 | read-only | The minimum of all the samples in the collection and measurement
set associated with this row. Values are provided in units
of microseconds. |
| U32 jnxRpmHistCalcMax | 1.3.6.1.4.1.2636.3.50.1.6.1.4 | Unsigned32 | read-only | The maximum of all the samples in the collection and measurement
set associated with this row. Values are provided in units
of microseconds. |
| U32 jnxRpmHistCalcAverage | 1.3.6.1.4.1.2636.3.50.1.6.1.5 | Unsigned32 | read-only | The average of all the samples in the collection and measurement
set associated with this row. Values are provided in units
of microseconds. |
| U32 jnxRpmHistCalcPkToPk | 1.3.6.1.4.1.2636.3.50.1.6.1.6 | Unsigned32 | read-only | The difference between the minimum and maximum of all the samples
in the collection and measurement set associated with this row.
Values are provided in units of microseconds. |
| U32 jnxRpmHistCalcStdDev | 1.3.6.1.4.1.2636.3.50.1.6.1.7 | Unsigned32 | read-only | The standard deviation calculated over all the samples
in the collection and measurement set associated with this row.
Values are provided in units of microseconds. |
| NUM jnxRpmHistCalcSum | 1.3.6.1.4.1.2636.3.50.1.6.1.8 | CounterBasedGauge64 | read-only | The sum of all the samples in the collection and measurement set
associated with this row. Values are provided in units of
microseconds. |
