Juniper-Internet-CONF

All MIBs › Juniper-Internet-CONF

Organization: Juniper Networks, Inc.

Last Updated: 2008-05-19

Description: Juniper-Internet-CONF module

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Juniper-Internet-CONF?

Juniper-Internet-CONF is a Juniper Networks proprietary MIB module that defines SNMP agent capability statements for the basic Layer 3 and Layer 4 'Internet' component of the SNMP agent running on the Juniper E-series family of routers. It belongs to the Juniper enterprise MIB tree and is specifically a conformance/AGENT-CAPABILITIES module rather than a data-carrying MIB. As such it does not expose interface, environmental, or performance counters itself; its role is purely to declare which parts of the IETF Internet-family MIBs (IP, TCP, UDP, etc.) the Juniper E-series agent implements. It therefore has a strong structural dependency on the standard IETF Internet-layer MIBs (e.g., IP-MIB, TCP-MIB, UDP-MIB) whose object groups it references. Typical deployment context is internal to the Juniper E-series SNMP agent's self-description, used by management stations to determine feature/version compatibility rather than for direct hardware or software status monitoring. Engineers can download the Juniper-Internet-CONF file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Juniper-Internet-CONF. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Juniper E-series routers

Monitoring Examples

This module contains no sample runtime objects because it is an AGENT-CAPABILITIES statement, not a data MIB; it simply declares which Internet-layer (IP/TCP/UDP) object groups the Juniper E-series SNMP agent supports at a given software release. An NMS would consult it during capability negotiation to confirm support for specific IP-MIB or TCP-MIB groups rather than to poll live values. No monitoring scenario applies since there are no runtime-monitorable objects in this module.

Imported Objects

From Juniper-Agents

juniAgents

MODULE-IDENTITY

From SNMPv2-CONF

AGENT-CAPABILITIES

From SNMPv2-SMI

MODULE-IDENTITY

OIDs

OID symbolic	OID numeric	Description
juniInternetAgent	1.3.6.1.4.1.4874.5.2.21	The agent capabilities definitions for the basic layer 3 and 4 Internet component of the SNMP agent in the Juniper E-series family of products.
juniInternetAgentV1	1.3.6.1.4.1.4874.5.2.21.1	The MIBs supported by the SNMP agent for the Internet application in JUNOSe. These capabilities became obsolete when the IP global objects were added to the Juniper-IP-MIB.
juniInternetAgentV2	1.3.6.1.4.1.4874.5.2.21.2	The MIBs supported by the SNMP agent for the Internet application in JUNOSe. These capabilities became obsolete when support was added for the RFC1213-MIB.ipRouteTable and the Juniper-IP-MIB.juniIpIfAssocTable.
juniInternetAgentV3	1.3.6.1.4.1.4874.5.2.21.3	The MIBs supported by the SNMP agent for the Internet application in JUNOSe. These capabilities became obsolete when the QoS related objects in the Juniper-IP-MIB were obsoleted.
juniInternetAgentV4	1.3.6.1.4.1.4874.5.2.21.4	The MIBs supported by the SNMP agent for the Internet application in JUNOSe. These capabilities became obsolete when BGP new format objects were added and ARP timeout and rate limit objects were obsoleted in the Juniper-IP-MIB.
juniInternetAgentV5	1.3.6.1.4.1.4874.5.2.21.5	The MIBs supported by the SNMP agent for the Internet application in JUNOSe. These capabilities became obsolete when support was added to the Juniper-IP-MIB for router index and unnumbered interfaces referencing numbered interfaces.
juniInternetAgentV6	1.3.6.1.4.1.4874.5.2.21.6	The MIBs supported by the SNMP agent for the Internet application in JUNOSe. These capabilities became obsolete when support was added to the Juniper-IP-MIB for analyzer mode and auto configure for interfaces.
juniInternetAgentV7	1.3.6.1.4.1.4874.5.2.21.7	The MIBs supported by the SNMP agent for the Internet application in JUNOSe. These capabilities became obsolete when support for TCP MSS configuration of IP interfaces was added to the Juniper-IP-MIB.
juniInternetAgentV8	1.3.6.1.4.1.4874.5.2.21.8	The MIBs supported by the SNMP agent for the Internet application in JUNOSe. These capablities became obsolete when the object rsIpVpnIdOui and rsIpVpnIdIndex were obsoleted.
juniInternetAgentV9	1.3.6.1.4.1.4874.5.2.21.9	The MIBs supported by the SNMP agent for the Internet application in JUNOSe. when support for route table limits and traps was added to the Juniper-IP-MIB.
juniInternetAgentV10	1.3.6.1.4.1.4874.5.2.21.10	The MIBs supported by the SNMP agent for the Internet application in JUNOSe.
juniInternetAgentV11	1.3.6.1.4.1.4874.5.2.21.11	The MIBs supported by the SNMP agent for the Internet application in JUNOSe.
juniInternetAgentV12	1.3.6.1.4.1.4874.5.2.21.12	The MIBs supported by the SNMP agent for the Internet application in JUNOSe.

RFC description

Declares SNMP agent capability statements for basic Internet layer 3 and 4 protocol implementations on Juniper E-series routers.

Start monitoring Juniper E-series router (agent capabilities, IP/TCP/UDP Internet layer) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Juniper-Internet-CONF

What Is Juniper-Internet-CONF?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description