Juniper-PROFILE-MIB

All MIBs › Juniper-PROFILE-MIB

Organization: Juniper Networks, Inc.

Last Updated: 2003-01-31

Category: Domain: Subscriber Management, Vendor: Juniper

Description: Juniper Networks MIB for managing generic subscriber service profiles used for access policy on Juniper E-series platforms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Juniper-PROFILE-MIB?

Juniper-PROFILE-MIB is a Juniper Networks enterprise MIB for managing generic, named service profiles applied to subscriber-facing interfaces on JUNOSe E-series platforms. It exposes tables mapping profile names to numeric profile IDs and tables assigning a given profile to specific interfaces, making it primarily a configuration/provisioning MIB rather than a performance-counter one. Its monitoring value is in verifying software/provisioning state: checking that a profile's row status is active and that the correct profile ID is bound to the correct interface index helps catch subscriber mis-provisioning or stale/orphaned profile entries, which is effectively a software-configuration health check rather than a hardware one. It is designed to work alongside AAA/RADIUS-driven subscriber management on the same platform. It is typically deployed in broadband/edge access networks where per-subscriber service policies are assigned dynamically, and network engineers consult the Juniper-PROFILE-MIB MIB to verify those profile bindings.

IPNetwork Monitor allows you to monitor SNMP objects defined in Juniper-PROFILE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Juniper E-series router (JUNOSe broadband access/edge platform)

Monitoring Examples

An operator can enumerate juniProfileNameTable entries and check juniProfileNameRowStatus to confirm each named profile is active, then cross-reference juniProfileIdTable (juniProfileIdId to juniProfileIdName) and juniProfAssignIfTable (juniProfAssignIfIndex) to verify that a specific subscriber interface has the expected profile ID assigned. A missing or incorrect entry in juniProfAssignIfTable would explain why a subscriber isn't receiving the service parameters associated with their intended profile.

What Can Be Monitored

configured profile names and IDs
profile row status (active/inactive)
profile-to-interface assignments
interface index bound to a profile

Imported Objects

From IF-MIB

InterfaceIndex

From Juniper-MIBs

juniMibs

MODULE-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
juniProfileMIB	1.3.6.1.4.1.4874.2.2.25			The Profile MIB for the Juniper Networks enterprise.
juniProfileObjects	1.3.6.1.4.1.4874.2.2.25.1
juniProfileName	1.3.6.1.4.1.4874.2.2.25.1.1
juniProfileNameTable	1.3.6.1.4.1.4874.2.2.25.1.1.1		not-accessible	The entries in this table provide mappings of configuration profile names to local integer identifiers for those profiles. These integers are used as indexes into other MIB tables containing profile configuration parameters associated with the same profile name.
juniProfileNameEntry	1.3.6.1.4.1.4874.2.2.25.1.1.1.1		not-accessible	A mapping of a profile name to an integer identifier for that name.
STR juniProfileNameName	1.3.6.1.4.1.4874.2.2.25.1.1.1.1.1	DisplayString	read-only	The profile name uniquely identifying this entry.
ROW juniProfileNameRowStatus	1.3.6.1.4.1.4874.2.2.25.1.1.1.1.2	RowStatus	read-create	Controls creation/deletion of entries in this table. Only the values 'createAndGo' and 'destroy' may be SET.
U32 juniProfileNameId	1.3.6.1.4.1.4874.2.2.25.1.1.1.1.3	Unsigned32	read-only	The integer identifier associated with this profile name. This value of this identifier is assigned by the device when an entry in this table is created.
juniProfileIdTable	1.3.6.1.4.1.4874.2.2.25.1.1.2		not-accessible	Provides inverse mapping of profile IDs to profile names.
juniProfileIdEntry	1.3.6.1.4.1.4874.2.2.25.1.1.2.1		not-accessible	A mapping of an integer identifier to a profile name.
U32 juniProfileIdId	1.3.6.1.4.1.4874.2.2.25.1.1.2.1.1	Unsigned32	not-accessible	The integer identifier associated with this profile name.
STR juniProfileIdName	1.3.6.1.4.1.4874.2.2.25.1.1.2.1.2	DisplayString	read-only	The profile name having the associated identifier.
juniProfileAssign	1.3.6.1.4.1.4874.2.2.25.1.2
juniProfAssignIf	1.3.6.1.4.1.4874.2.2.25.1.2.1
juniProfAssignIfTable	1.3.6.1.4.1.4874.2.2.25.1.2.1.1		not-accessible	Table providing profile assignment to interface/encapsulation pair. The entries in this table specify which profile to use when creating and configuring a dynamic interface (whose type is identified by the encapsulation) above a specified interface. Each entry in this table is reflected in a juniProfAssignIfTable entry having a zero-valued range identifier.
juniProfAssignIfEntry	1.3.6.1.4.1.4874.2.2.25.1.2.1.1.1		not-accessible	An assignment of a profile to an interface/encapsulation pair.
NUM juniProfAssignIfIndex	1.3.6.1.4.1.4874.2.2.25.1.2.1.1.1.1	InterfaceIndex	not-accessible	The ifIndex of the interface to which the profile is assigned.
JUN juniProfAssignIfEncaps	1.3.6.1.4.1.4874.2.2.25.1.2.1.1.1.2	JuniProfileIfEncaps	not-accessible	The encapsulated protocol type to which the assigned profile pertains. An interface may have a different profile assigned for each encapsulation it supports. If an entry for a specific encapsulation is absent, the profile assigned for the 'any' encapsulation will be used (if that assignment is present in this table).
ROW juniProfAssignIfRowStatus	1.3.6.1.4.1.4874.2.2.25.1.2.1.1.1.3	RowStatus	read-create	For SET, supports only createAndGo(4) and destroy(6). Returns active(1) when read.
U32 juniProfAssignIfProfileId	1.3.6.1.4.1.4874.2.2.25.1.2.1.1.1.4	Unsigned32	read-create	The ID of the profile assigned to this interface/encapsulation pair.
juniProfToIfMapTable	1.3.6.1.4.1.4874.2.2.25.1.2.1.2		not-accessible	Table to report the set of interface/encapsulation pairs assigned to each profile.
juniProfToIfMapEntry	1.3.6.1.4.1.4874.2.2.25.1.2.1.2.1		not-accessible	Reports an interface/encapsulation pair assigned to a profile.
U32 juniProfToIfMapProfileId	1.3.6.1.4.1.4874.2.2.25.1.2.1.2.1.1	Unsigned32	not-accessible	The ID of the profile assigned to this interface/encapsulation pair.
NUM juniProfToIfMapIndex	1.3.6.1.4.1.4874.2.2.25.1.2.1.2.1.2	InterfaceIndex	not-accessible	The ifIndex of the interface to which the profile is assigned.
JUN juniProfToIfMapEncaps	1.3.6.1.4.1.4874.2.2.25.1.2.1.2.1.3	JuniProfileIfEncaps	read-only	The encapsulation type to which the assigned profile pertains. An interface may have a different profile assigned for each encapsulation type it supports.
juniProfAssignIfRange	1.3.6.1.4.1.4874.2.2.25.1.2.2
juniProfAssignIfRangeTable	1.3.6.1.4.1.4874.2.2.25.1.2.2.1		not-accessible	Table providing profile assignment to interface/encapsulation/range 3-tuple. The entries in this table specify which profile to use when creating and configuring a dynamic interface (whose type is identified by the encapsulation) above a specified interface, with profile selection being further discriminated by the range identifier. Each entry in juniProfAssignIfTable is reflected by an entry in this table having a zero-valued range identifier.
juniProfAssignIfRangeEntry	1.3.6.1.4.1.4874.2.2.25.1.2.2.1.1		not-accessible	An assignment of a profile to an interface/encapsulation/range 3-tuple.
NUM juniProfAssignIfRangeIndex	1.3.6.1.4.1.4874.2.2.25.1.2.2.1.1.1	InterfaceIndex	not-accessible	The ifIndex of the interface to which the profile is assigned.
JUN juniProfAssignIfRangeEncaps	1.3.6.1.4.1.4874.2.2.25.1.2.2.1.1.2	JuniProfileIfEncaps	not-accessible	The encapsulated protocol type to which the assigned profile pertains. An interface may have zero, one or more profiles assigned for each encapsulation it supports. If an entry for a specific encapsulation is absent, the profile assigned for the 'any' encapsulation will be used (if that assignment is present in this table).
JUN juniProfAssignIfRangeRangeId	1.3.6.1.4.1.4874.2.2.25.1.2.2.1.1.3	JuniProfileRangeId	not-accessible	An application-specific range identifier to which the assigned profile pertains. An interface may have zero, one or more profiles assigned for each encapsulation it supports, distinguished by range identifier. A value of zero should be used for an interface that does not support multiple profile assignments per encapsulation.
ROW juniProfAssignIfRangeRowStatus	1.3.6.1.4.1.4874.2.2.25.1.2.2.1.1.4	RowStatus	read-create	For SET, supports only createAndGo(4) and destroy(6). Returns active(1) when read.
U32 juniProfAssignIfRangeProfileId	1.3.6.1.4.1.4874.2.2.25.1.2.2.1.1.5	Unsigned32	read-create	The ID of the profile assigned to this interface/encapsulation/range 3-tuple.
juniProfToIfRangeMapTable	1.3.6.1.4.1.4874.2.2.25.1.2.2.2		not-accessible	Table to report the set of interface/encapsulation/range 3-tuples assigned to each profile.
juniProfToIfRangeMapEntry	1.3.6.1.4.1.4874.2.2.25.1.2.2.2.1		not-accessible	Reports an interface/encapsulation/range 3-tuple assigned to a profile.
U32 juniProfToIfRangeMapProfileId	1.3.6.1.4.1.4874.2.2.25.1.2.2.2.1.1	Unsigned32	not-accessible	The ID of the profile assigned to this interface/encapsulation pair.
NUM juniProfToIfRangeMapIndex	1.3.6.1.4.1.4874.2.2.25.1.2.2.2.1.2	InterfaceIndex	not-accessible	The ifIndex of the interface to which the profile is assigned.
JUN juniProfToIfRangeMapEncaps	1.3.6.1.4.1.4874.2.2.25.1.2.2.2.1.3	JuniProfileIfEncaps	read-only	The encapsulation type to which the assigned profile pertains. An interface may have zero, one or more profiles assigned for each encapsulation type it supports.
JUN juniProfToIfRangeMapRangeId	1.3.6.1.4.1.4874.2.2.25.1.2.2.2.1.4	JuniProfileRangeId	not-accessible	An application-specific range identifier to which the assigned profile pertains. An interface may have zero, one or more profiles assigned for each encapsulation it supports, distinguished by range identifier.
juniProfileMIBConformance	1.3.6.1.4.1.4874.2.2.25.4
juniProfileMIBCompliances	1.3.6.1.4.1.4874.2.2.25.4.1
juniProfileCompliance	1.3.6.1.4.1.4874.2.2.25.4.1.1			Obsolete compliance statement for systems supporting naming of configuration profiles. This statement became obsolete when the interface profile assignment group was added.
juniProfileCompliance2	1.3.6.1.4.1.4874.2.2.25.4.1.2			Obsolete compliance statement for systems supporting naming of configuration profiles and profile assignment to interfaces. This statement became obsolete when support for range indexing of profile assignments was added.
juniProfileCompliance3	1.3.6.1.4.1.4874.2.2.25.4.1.3			The compliance statement for systems supporting naming of configuration profiles and profile assignment to interfaces.
juniProfileMIBGroups	1.3.6.1.4.1.4874.2.2.25.4.2
juniProfileGroup	1.3.6.1.4.1.4874.2.2.25.4.2.1			The basic collection of objects providing management of Profile naming functionality in a Juniper product.
juniProfileIfGroup	1.3.6.1.4.1.4874.2.2.25.4.2.2			Obsolete collection of objects providing management of Profile assignment to interfaces in a Juniper product. This group became obsolete when support for range indexing of profile assignments was added.
juniProfileIfGroup2	1.3.6.1.4.1.4874.2.2.25.4.2.3			The basic collection of objects providing management of Profile assignment to interfaces in a Juniper product.

RFC description

Manages interface profiles and profile assignments to interface/encapsulation pairs across multiple Juniper JUNOSe platforms.

Start monitoring Juniper E-series router, JUNOSe broadband access/edge platform (named service profiles) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Juniper-PROFILE-MIB

What Is Juniper-PROFILE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description