Unisphere-Data-BGP-MIB

All MIBs › Unisphere-Data-BGP-MIB

Organization: Juniper Networks, Inc.

Last Updated: 2002-09-04

Category: Juniper Unisphere ERX Routing

Description: Manages Juniper/Unisphere ERX BGP routing protocol peers, path attributes, and routing policies.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Unisphere-Data-BGP-MIB?

Unisphere-Data-BGP-MIB is a vendor MIB from Unisphere Networks (acquired by Juniper) for the ERX routing switch family, providing detailed management of the BGP (Border Gateway Protocol) routing process beyond what the standard BGP4-MIB covers. It exposes global BGP configuration such as local AS number, router identifier, MED comparison and local preference defaults, route reflection/cluster settings, confederation ID, and route-table statistics groups. Its monitoring emphasis is on routing software/protocol state: confirming BGP is enabled and correctly configured, tracking route-table statistics for prefix counts, and using reset controls to recover from stuck peer sessions -- effectively a software/protocol-health view rather than hardware telemetry. It is a vendor extension that parallels and layers on top of the standard IETF BGP4-MIB concepts (local AS, identifier, route reflection) using Unisphere-specific object names. It is deployed on Juniper/Unisphere ERX edge routers in ISP and enterprise core/edge routing environments running BGP. Engineers can download the Unisphere-Data-BGP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Unisphere-Data-BGP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Juniper/Unisphere ERX edge routing switch

Monitoring Examples

An operator would poll usdBgpLocalAsNumber, usdBgpIdentifier, and usdBgpEnabled to confirm the router's BGP process identity and operational state, and check usdBgpDefaultLocalPreference or usdBgpAlwaysCompareMed to verify routing-policy defaults match intent. usdBgpRouteTableStatisticsGroup-related counters would be watched for unexpected drops in learned-route counts, indicating peer or session issues, and usdBgpResetAllConnectionType could be invoked to force a reset of all BGP sessions during a recovery procedure. A mismatch between expected and actual usdBgpClusterId or usdBgpConfederationId would explain unexpected route-reflection behavior.

What Can Be Monitored

BGP enabled state
local AS number and router identifier
default local preference and MED comparison setting
route reflection cluster ID
confederation ID
route table statistics

Imported Objects

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION
TruthValue

From Unisphere-Data-MIBs

usDataMibs

MODULE-IDENTITY

From Unisphere-Data-TC

UsdVrfName

How to Use in IPNetwork Monitor

Example using usdBgpPeerInUpdates OID:

Select a Juniper/Unisphere ERX edge routing switch (BGP local-AS/route-reflection/route-table statistics status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type usdBgpPeerInUpdates into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of BGP UPDATE messages received on this connection. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
usdBgpMIB	1.3.6.1.4.1.4874.2.2.29			The BGP Protocol MIB for the Unisphere Networks enterprise.
usdBgpObjects	1.3.6.1.4.1.4874.2.2.29.1
usdBgpGeneralGroup	1.3.6.1.4.1.4874.2.2.29.1.1
INT usdBgpLocalAsNumber	1.3.6.1.4.1.4874.2.2.29.1.1.1	INTEGER	read-write	The local autonomous system number. This object cannot be modified if BGP is enabled.
T/F usdBgpEnabled	1.3.6.1.4.1.4874.2.2.29.1.1.2	TruthValue	read-write	Set this object to true(1) in order to have BGP router enabled.
IP usdBgpIdentifier	1.3.6.1.4.1.4874.2.2.29.1.1.3	IpAddress	read-write	The BGP identifier of the local system. The identifier is the system router ID by default.
T/F usdBgpAlwaysCompareMed	1.3.6.1.4.1.4874.2.2.29.1.1.4	TruthValue	read-write	Set this object to true(1) in order to compare metrics for paths from neighors of different ASs.
U32 usdBgpDefaultLocalPreference	1.3.6.1.4.1.4874.2.2.29.1.1.5	Unsigned32	read-write	The default local preference.
INT usdBgpEqualCostLimit	1.3.6.1.4.1.4874.2.2.29.1.1.6	INTEGER	read-write	The maximum equal cost paths to store in routing table.
T/F usdBgpClientToClientReflection	1.3.6.1.4.1.4874.2.2.29.1.1.7	TruthValue	read-write	Set this object to true(1) in order to have client-to-client route reflection enabled.
U32 usdBgpClusterId	1.3.6.1.4.1.4874.2.2.29.1.1.8	Unsigned32	read-write	The cluster ID. When this object is zero, the router ID will be used.
U32 usdBgpConfederationId	1.3.6.1.4.1.4874.2.2.29.1.1.9	Unsigned32	read-write	The confederation ID. When this object is zero, the router is not in a confederation.
T/F usdBgpMissingAsWorst	1.3.6.1.4.1.4874.2.2.29.1.1.10	TruthValue	read-write	If this object is set to true(1) routes without a MED attribute are considered worse than routes with a MED attribute. If this object is set to false(0) routes without a MED attribute are considered better than routes with a MED attribute.
USD usdBgpResetAllConnectionType	1.3.6.1.4.1.4874.2.2.29.1.1.11	UsdBgpResetConnectionType	read-write	Writing a value to this object causes all sessions to all peers to be cleared; the value determines what type of clear is executed (hard clear, soft clear in, soft clear out, etc.). Reading this object has no effect and always returns resetTypeNoop.
T/F usdBgpAdvertiseInactive	1.3.6.1.4.1.4874.2.2.29.1.1.12	TruthValue	read-write	Set this object to true(1) in order to propagate received BGP routes which are not the best route in the IP forwarding table.
T/F usdBgpEnforceFirstAs	1.3.6.1.4.1.4874.2.2.29.1.1.13	TruthValue	read-write	Set this object to true(1) in order to check whether the first AS number in the AS-path in routes from EBGP peers is consistent with the AS number of the peer.
T/F usdBgpConfedCompareMed	1.3.6.1.4.1.4874.2.2.29.1.1.14	TruthValue	read-write	Set this object to true(1) in order to compare metrics for paths from neighors of different sub-ASs in the same confederation.
INT usdBgpGlobalRetryInterval	1.3.6.1.4.1.4874.2.2.29.1.1.15	INTEGER	read-write	The default number of seconds before BGP retries to establish an outgoing BGP session.
INT usdBgpGlobalConfigKeepAliveInterval	1.3.6.1.4.1.4874.2.2.29.1.1.16	INTEGER	read-write	Default time interval in seconds for the KeepAlive timer for all peers. Zero means don't send KeepAlive messages.
INT usdBgpGlobalConfigHoldTime	1.3.6.1.4.1.4874.2.2.29.1.1.17	INTEGER	read-write	Default time interval in seconds for the Hold timer for all peers. Zero means don't expect KeepAlive message to be received.
INT usdBgpGlobalAsOriginationInterval	1.3.6.1.4.1.4874.2.2.29.1.1.18	INTEGER	read-write	Default time interval in seconds for the MinASOriginationInterval timer for all peers.
INT usdBgpExternalAdvertisementInterval	1.3.6.1.4.1.4874.2.2.29.1.1.19	INTEGER	read-write	Default time interval in seconds for the MinRouteAdvertisementInterval timer for all external peers.
T/F usdBgpGlobalRibOutEnabled	1.3.6.1.4.1.4874.2.2.29.1.1.20	TruthValue	read-write	Set this object to true(1) in order to enable RIB-out by default for all peers, or to false(2) to disable RIB-out by default for all peers.
T/F usdBgpOverloadShutdown	1.3.6.1.4.1.4874.2.2.29.1.1.21	TruthValue	read-write	Set this object to true(1) for BGP to shut itself down when it runs out of memory. Set this object to false(2) for BGP to continue running (with incomplete information) when it runs out of memory.
T/F usdBgpLogNeighborChanges	1.3.6.1.4.1.4874.2.2.29.1.1.22	TruthValue	read-write	Set this object to true(1) for BGP log a message whenever a peer enters or leaves the established state.
T/F usdBgpFastExternalFallover	1.3.6.1.4.1.4874.2.2.29.1.1.23	TruthValue	read-write	Set this object to true(1) for BGP to immediately bring down any directly adjacent EBGP session on a link down.
INT usdBgpInternalAdvertisementInterval	1.3.6.1.4.1.4874.2.2.29.1.1.24	INTEGER	read-write	Default time interval in seconds for the MinRouteAdvertisementInterval timer for all internal peers.
INT usdBgpMaxAsLimit	1.3.6.1.4.1.4874.2.2.29.1.1.25	INTEGER	read-write	Maximum length of received AS-path. Received routes with an AS-path longer than this are not placed in the IP forwarding table and are not propagated to other peers. Zero means no maximum length.
INT usdBgpOperationalState	1.3.6.1.4.1.4874.2.2.29.1.1.26	INTEGER	read-only	The BGP instance operational state.
INT usdBgpPreviousOperationalState	1.3.6.1.4.1.4874.2.2.29.1.1.27	INTEGER	read-only	The BGP instance previous operational state.
T/F usdBgpAutomaticRouteTargetFilter	1.3.6.1.4.1.4874.2.2.29.1.1.28	TruthValue	read-write	Set this object to true(1) for BGP to enable automatic route-target filtering.
T/F usdBgpDefaultIPv4Unicast	1.3.6.1.4.1.4874.2.2.29.1.1.29	TruthValue	read-write	Set this object to true(1) for BGP to automatically activate peers in the IPv4 unicast address family.
T/F usdBgpRedistributeInternal	1.3.6.1.4.1.4874.2.2.29.1.1.30	TruthValue	read-write	Set this object to true(1) for BGP to automatically redistribute iBGP routes to IGP protocols.
BIT usdBgpUnconfiguredAttributes	1.3.6.1.4.1.4874.2.2.29.1.1.33	Bits	read-write	On get each bit indicates whether the corresponding attribute is configured or unconfigured: 0 = The attribute is configured (i.e. the configured value is the operational value). 1 = The attribute is unconfigured (i.e. the operational value is inherited from the a higher level which could be the default value). Getting the attribute value itself always returns the operational value of that attribute regardless of whether the attribute is configured or unconfigured. On write each bit indicates wheter or not the corresponding attribute should be set to the unconfigured state: 0 = No operation (i.e. do not change the state of the attribute). 1 = Set the attribute to the unconfigured state. Setting an attribute to a value has the automatic side-effect of setting the bit with the same name to zero.
usdBgpRouteTableStatisticsGroup	1.3.6.1.4.1.4874.2.2.29.1.2
U32 usdBgpBaselineTime	1.3.6.1.4.1.4874.2.2.29.1.2.1	Unsigned32	read-only	The sysUpTime at which the counters were most recently baselined.
G32 usdBgpDestinationCount	1.3.6.1.4.1.4874.2.2.29.1.2.2	Gauge32	read-only	Number of distinct destinations in the local RIB.
G32 usdBgpDestinationMemoryUsed	1.3.6.1.4.1.4874.2.2.29.1.2.3	Gauge32	read-only	Memory used by distinct destinations in the local RIB.
G32 usdBgpRouteCount	1.3.6.1.4.1.4874.2.2.29.1.2.4	Gauge32	read-only	Number of routes in the local RIB.
G32 usdBgpRouteMemoryUsed	1.3.6.1.4.1.4874.2.2.29.1.2.5	Gauge32	read-only	Memory used by routes in the local RIB.
G32 usdBgpSelectedRouteCount	1.3.6.1.4.1.4874.2.2.29.1.2.6	Gauge32	read-only	Number of routes selected for route table installation.
G32 usdBgpPathAttributeCount	1.3.6.1.4.1.4874.2.2.29.1.2.8	Gauge32	read-only	Number of entries in the path attribute database.
G32 usdBgpPathAttributeMemoryUsed	1.3.6.1.4.1.4874.2.2.29.1.2.9	Gauge32	read-only	Memory used by entries in the path attribute database.
G32 usdBgpRouteFlapHistoryCount	1.3.6.1.4.1.4874.2.2.29.1.2.10	Gauge32	read-only	Number of routes with active route flap histories.
G32 usdBgpRouteFlapHistoryMemoryUsed	1.3.6.1.4.1.4874.2.2.29.1.2.11	Gauge32	read-only	Memory used by routes with active route flap histories.
G32 usdBgpSuppressedRouteCount	1.3.6.1.4.1.4874.2.2.29.1.2.12	Gauge32	read-only	Number of routes suppressed due to route flap.
usdBgpConfederationPeerTable	1.3.6.1.4.1.4874.2.2.29.1.3		not-accessible	The Unisphere BGP Confederation Peer Table describes the BGP-specific characteristics of confederation peers.
usdBgpConfederationPeerEntry	1.3.6.1.4.1.4874.2.2.29.1.3.1		not-accessible	The BGP Confederation Peer Entry describes BGP-specific characteristics of one confederation peer.
INT usdBgpConfederationPeerAsNumber	1.3.6.1.4.1.4874.2.2.29.1.3.1.1	INTEGER	not-accessible	The AsNumber of this confederation peer.
ROW usdBgpConfederationPeerRowStatus	1.3.6.1.4.1.4874.2.2.29.1.3.1.2	RowStatus	read-create	Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy
usdBgpPeerTable	1.3.6.1.4.1.4874.2.2.29.1.4		not-accessible	The Unisphere BGP Peer Table describes the BGP-specific characteristics of peers.
usdBgpPeerEntry	1.3.6.1.4.1.4874.2.2.29.1.4.1		not-accessible	The BGP Peer Entry describes BGP-specific characteristics of one peer.
USD usdBgpPeerVrfName	1.3.6.1.4.1.4874.2.2.29.1.4.1.1	UsdVrfName	not-accessible	The name of the VPN Routing Forwarding (VRF) instance in which this peer is configured. The empty string indicates that this peer is not in a VRF.
IP usdBgpPeerRemoteAddress	1.3.6.1.4.1.4874.2.2.29.1.4.1.2	IpAddress	not-accessible	The remote IP address of this entry's BGP peer.
INT usdBgpPeerAdminStatus	1.3.6.1.4.1.4874.2.2.29.1.4.1.3	INTEGER	read-create	The desired state of the BGP connection. A transition from 'stop' to 'start' will cause the BGP Start Event to be generated. A transition from 'start' to 'stop' will cause the BGP Stop Event to be generated. This parameter can be used to restart BGP peer connections. Care should be used in providing write access to this object without adequate authentication.
INT usdBgpPeerState	1.3.6.1.4.1.4874.2.2.29.1.4.1.4	INTEGER	read-only	The BGP peer connection state.
I32 usdBgpPeerNegotiatedVersion	1.3.6.1.4.1.4874.2.2.29.1.4.1.5	Integer32	read-only	The negotiated version of BGP running between the two peers.
IP usdBgpPeerLocalAddress	1.3.6.1.4.1.4874.2.2.29.1.4.1.6	IpAddress	read-only	The local IP address of this entry's BGP connection.
IP usdBgpPeerLocalAddressMask	1.3.6.1.4.1.4874.2.2.29.1.4.1.7	IpAddress	read-only	The local IP address mask of this entry's BGP connection.
INT usdBgpPeerLocalPort	1.3.6.1.4.1.4874.2.2.29.1.4.1.8	INTEGER	read-only	The local port for the TCP connection between the BGP peers.
INT usdBgpPeerRemoteAsNumber	1.3.6.1.4.1.4874.2.2.29.1.4.1.9	INTEGER	read-create	The peer's autonomous system number.
INT usdBgpPeerRemotePort	1.3.6.1.4.1.4874.2.2.29.1.4.1.10	INTEGER	read-only	The remote port for the TCP connection between the BGP peers. Note that the objects bgpPeerLocalAddr, bgpPeerLocalPort, bgpPeerRemoteAddr and bgpPeerRemotePort provide the appropriate reference to the standard MIB TCP connection table.
C32 usdBgpPeerInUpdatesEx	1.3.6.1.4.1.4874.2.2.29.1.4.1.11	Counter32	read-only	The number of BGP UPDATE messages received on this connection. This object should be initialized to zero (0) when the connection is established.
C32 usdBgpPeerOutUpdates	1.3.6.1.4.1.4874.2.2.29.1.4.1.12	Counter32	read-only	The number of BGP UPDATE messages transmitted on this connection. This object should be initialized to zero (0) when the connection is established.
C32 usdBgpPeerInTotalMessages	1.3.6.1.4.1.4874.2.2.29.1.4.1.13	Counter32	read-only	The total number of messages received from the remote peer on this connection. This object should be initialized to zero when the connection is established.
C32 usdBgpPeerOutTotalMessages	1.3.6.1.4.1.4874.2.2.29.1.4.1.14	Counter32	read-only	The total number of messages transmitted to the remote peer on this connection. This object should be initialized to zero when the connection is established.
OCT usdBgpPeerLastErrorCode	1.3.6.1.4.1.4874.2.2.29.1.4.1.15	OCTET STRING	read-only	The last error code and subcode seen by this peer on this connection. If no error has occurred, this field is zero. Otherwise, the first byte of this two byte OCTET STRING contains the error code, and the second byte contains the subcode.
STR usdBgpPeerLastResetReason	1.3.6.1.4.1.4874.2.2.29.1.4.1.16	DisplayString	read-only	The string representing the last error code seen by this peer on this connection. If no error has occurred, this string is null.
C32 usdBgpPeerFsmEstablishedTransitions	1.3.6.1.4.1.4874.2.2.29.1.4.1.17	Counter32	read-only	The total number of times the BGP FSM transitioned into the established state.
G32 usdBgpPeerFsmEstablishedTime	1.3.6.1.4.1.4874.2.2.29.1.4.1.18	Gauge32	read-only	This timer indicates how long (in seconds) this peer has been in the Established state or how long since this peer was last in the Established state. It is set to zero when a new peer is configured or the router is booted.
INT usdBgpPeerRetryInterval	1.3.6.1.4.1.4874.2.2.29.1.4.1.19	INTEGER	read-create	Time interval in seconds for the ConnectRetry timer. The suggested value for this timer is 120 seconds.
INT usdBgpPeerHoldTime	1.3.6.1.4.1.4874.2.2.29.1.4.1.20	INTEGER	read-only	Time interval in seconds for the Hold Timer established with the peer. The value of this object is calculated by this BGP speaker by using the smaller of the value in bgpPeerHoldTimeConfigured and the Hold Time received in the OPEN message. This value must be at lease three seconds if it is not zero (0) in which case the Hold Timer has not been established with the peer, or, the value of bgpPeerHoldTimeConfigured is zero (0).
INT usdBgpPeerKeepAliveInterval	1.3.6.1.4.1.4874.2.2.29.1.4.1.21	INTEGER	read-only	Time interval in seconds for the KeepAlive timer established with the peer. The value of this object is calculated by this BGP speaker such that, when compared with bgpPeerHoldTime, it has the same proportion as what bgpPeerKeepAliveConfigured has when compared with bgpPeerHoldTimeConfigured. If the value of this object is zero (0), it indicates that the KeepAlive timer has not been established with the peer, or, the value of bgpPeerKeepAliveConfigured is zero (0).
INT usdBgpPeerConfigHoldTime	1.3.6.1.4.1.4874.2.2.29.1.4.1.22	INTEGER	read-create	Time interval in seconds for the Hold Time configured for this BGP speaker with this peer. This value is placed in an OPEN message sent to this peer by this BGP speaker, and is compared with the Hold Time field in an OPEN message received from the peer when determining the Hold Time (bgpPeerHoldTime) with the peer. This value must not be less than three seconds if it is not zero (0) in which case the Hold Time is NOT to be established with the peer. The suggested value for this timer is 90 seconds.
INT usdBgpPeerConfigKeepAliveInterval	1.3.6.1.4.1.4874.2.2.29.1.4.1.23	INTEGER	read-create	Time interval in seconds for the KeepAlive timer configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE messages' frequency relative to the value specified in bgpPeerHoldTimeConfigured; the actual time interval for the KEEPALIVE messages is indicated by bgpPeerKeepAlive. A reasonable maximum value for this timer would be configured to be one third of that of bgpPeerHoldTimeConfigured. If the value of this object is zero (0), no periodical KEEPALIVE messages are sent to the peer after the BGP connection has been established. The suggested value for this timer is 30 seconds.
INT usdBgpPeerAsOriginationInterval	1.3.6.1.4.1.4874.2.2.29.1.4.1.24	INTEGER	read-create	Time interval in seconds for the MinASOriginationInterval timer. The suggested value for this timer is 10 seconds.
INT usdBgpPeerAdvertisementInterval	1.3.6.1.4.1.4874.2.2.29.1.4.1.25	INTEGER	read-create	Time interval in seconds for the MinRouteAdvertisementInterval timer. The suggested value for this timer is 30 seconds.
G32 usdBgpPeerInUpdateElapsedTime	1.3.6.1.4.1.4874.2.2.29.1.4.1.26	Gauge32	read-only	Elapsed time in seconds since the last BGP UPDATE message was received from the peer. Each time bgpPeerInUpdates is incremented, the value of this object is set to zero (0).
STR usdBgpPeerDescription	1.3.6.1.4.1.4874.2.2.29.1.4.1.27	DisplayString	read-create	Peer textual description.
IP usdBgpPeerRemoteIdentifier	1.3.6.1.4.1.4874.2.2.29.1.4.1.28	IpAddress	read-only	Peer's remote router ID.
U32 usdBgpPeerWeight	1.3.6.1.4.1.4874.2.2.29.1.4.1.29	Unsigned32	read-create	The weight assigned to routes learned from peer.
T/F usdBgpPeerEbgpMultihop	1.3.6.1.4.1.4874.2.2.29.1.4.1.30	TruthValue	read-create	The EBGP multihop is enabled.
INT usdBgpPeerEbgpMultihopTtl	1.3.6.1.4.1.4874.2.2.29.1.4.1.31	INTEGER	read-create	Maximum number of hops to the external peer (only relevant if EBGP multihop turned on).
IP usdBgpPeerUpdateSource	1.3.6.1.4.1.4874.2.2.29.1.4.1.32	IpAddress	read-create	The source IP address for peer connections.
OCT usdBgpPeerMd5Password	1.3.6.1.4.1.4874.2.2.29.1.4.1.33	OCTET STRING	read-create	The password for MD5 authentication. Reading this object always results in an OCTET STRING of length zero.
U32 usdBgpPeerMaxUpdateSize	1.3.6.1.4.1.4874.2.2.29.1.4.1.34	Unsigned32	read-create	The maximum size in bytes of transmitted UPDATE messages.
INT usdBgpPeerType	1.3.6.1.4.1.4874.2.2.29.1.4.1.35	INTEGER	read-only	The type of peer.
T/F usdBgpPeerSupportsCapabilityNegotiation	1.3.6.1.4.1.4874.2.2.29.1.4.1.36	TruthValue	read-only	The peer supports capability negotiation.
T/F usdBgpPeerCapabilityMultiProtocol	1.3.6.1.4.1.4874.2.2.29.1.4.1.37	TruthValue	read-only	The peer supports the multi-protocol capablity.
T/F usdBgpPeerCapabilityRouteRefresh	1.3.6.1.4.1.4874.2.2.29.1.4.1.38	TruthValue	read-only	The peer supports the route-refresh capability.
T/F usdBgpPeerCapabilityRouteRefreshCiscoProprietary	1.3.6.1.4.1.4874.2.2.29.1.4.1.39	TruthValue	read-only	The peer supports the route-refresh-cisco capability.
USD usdBgpPeerResetConnectionType	1.3.6.1.4.1.4874.2.2.29.1.4.1.40	UsdBgpResetConnectionType	read-create	Writing a value to this object causes the session to the peer to be cleared; the value determines what type of clear is executed (hard clear, soft clear in, soft clear out, etc.). Reading this object has no effect and always returns resetTypeNoop.
ROW usdBgpPeerRowStatus	1.3.6.1.4.1.4874.2.2.29.1.4.1.41	RowStatus	read-create	Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: usdBgpPeerRemoteAs
INT usdBgpPeerLocalAsNumber	1.3.6.1.4.1.4874.2.2.29.1.4.1.42	INTEGER	read-create	The local autonomous system number to be used for this peer. Value zero (0) means that the global local automous system number (as specified in the object usdBgpLocalAsNumber) is used.
BIT usdBgpPeerUnconfiguredAttributes	1.3.6.1.4.1.4874.2.2.29.1.4.1.60	Bits	read-create	On get each bit indicates whether the corresponding attribute is configured or unconfigured: 0 = The attribute is configured (i.e. the configured value is the operational value). 1 = The attribute is unconfigured (i.e. the operational value is inherited from the a higher level which could be the default value). Getting the attribute value itself always returns the operational value of that attribute regardless of whether the attribute is configured or unconfigured. On write each bit indicates wheter or not the corresponding attribute should be set to the unconfigured state: 0 = No operation (i.e. do not change the state of the attribute). 1 = Set the attribute to the unconfigured state. Setting an attribute to a value has the automatic side-effect of setting the bit with the same name to zero.
usdBgpPeerProposedAfiSafiPeerTable	1.3.6.1.4.1.4874.2.2.29.1.5		not-accessible	The Unisphere BGP PeerProposedAfiSafi Peer Table describes the BGP-specific AFI and SAFIs a peer proposed.
usdBgpPeerProposedAfiSafiPeerEntry	1.3.6.1.4.1.4874.2.2.29.1.5.1		not-accessible	The BGP PeerProposedAfiSafi Peer Entry describes a BGP-specific AFI/SAFIs proposed by one peer.
USD usdBgpPeerProposedAfiSafiPeerVrfName	1.3.6.1.4.1.4874.2.2.29.1.5.1.1	UsdVrfName	not-accessible	The name of the VPN Routing Forwarding (VRF) instance in which this peer is configured. The empty string indicates that this peer is not in a VRF.
IP usdBgpPeerProposedAfiSafiPeerRemoteAddr	1.3.6.1.4.1.4874.2.2.29.1.5.1.2	IpAddress	not-accessible	The remote IP address of this entry's BGP peer.
USD usdBgpPeerProposedAfiSafiPeerAfi	1.3.6.1.4.1.4874.2.2.29.1.5.1.3	UsdBgpAfi	not-accessible	The AFI proposed by this peer to us.
USD usdBgpPeerProposedAfiSafiPeerSafi	1.3.6.1.4.1.4874.2.2.29.1.5.1.4	UsdBgpSafi	not-accessible	The SAFI proposed by this peer to us.
ROW usdBgpPeerProposedAfiSafiPeerRowStatus	1.3.6.1.4.1.4874.2.2.29.1.5.1.5	RowStatus	read-only	Should always be active according to the Row Status convention.
usdBgpLocalProposedAfiSafiPeerTable	1.3.6.1.4.1.4874.2.2.29.1.6		not-accessible	The Unisphere BGP LocalProposedAfiSafi Peer Table describes the BGP-specific AFI and SAFIs proposed to the peer.
usdBgpLocalProposedAfiSafiPeerEntry	1.3.6.1.4.1.4874.2.2.29.1.6.1		not-accessible	The BGP LocalProposedAfiSafi Peer Entry describes a BGP-specific AFI/SAFIs proposed to one peer.
USD usdBgpLocalProposedAfiSafiPeerVrfName	1.3.6.1.4.1.4874.2.2.29.1.6.1.1	UsdVrfName	not-accessible	The name of the VPN Routing Forwarding (VRF) instance in which this peer is configured. The empty string indicates that this peer is not in a VRF.
IP usdBgpLocalProposedAfiSafiPeerRemoteAddr	1.3.6.1.4.1.4874.2.2.29.1.6.1.2	IpAddress	not-accessible	The remote IP address of this entry's BGP peer.
USD usdBgpLocalProposedAfiSafiPeerAfi	1.3.6.1.4.1.4874.2.2.29.1.6.1.3	UsdBgpAfi	not-accessible	The AFI we proposed to this peer.
USD usdBgpLocalProposedAfiSafiPeerSafi	1.3.6.1.4.1.4874.2.2.29.1.6.1.4	UsdBgpSafi	not-accessible	The SAFI we proposed to this peer.
ROW usdBgpLocalProposedAfiSafiPeerRowStatus	1.3.6.1.4.1.4874.2.2.29.1.6.1.5	RowStatus	read-only	Should always be active according to the Row Status convention.
usdBgpExchangedAfiSafiPeerTable	1.3.6.1.4.1.4874.2.2.29.1.7		not-accessible	The Unisphere BGP PeerExchangedAfiSafi Peer Table describes the BGP-specific AFI and SAFIs a peer exchanged.
usdBgpExchangedAfiSafiPeerEntry	1.3.6.1.4.1.4874.2.2.29.1.7.1		not-accessible	The BGP ExchangedAfiSafi Peer Entry describes a BGP-specific AFI/SAFIs exchanged by one peer.
USD usdBgpExchangedAfiSafiPeerVrfName	1.3.6.1.4.1.4874.2.2.29.1.7.1.1	UsdVrfName	not-accessible	The name of the VPN Routing Forwarding (VRF) instance in which this peer is configured. The empty string indicates that this peer is not in a VRF.
IP usdBgpExchangedAfiSafiPeerRemoteAddr	1.3.6.1.4.1.4874.2.2.29.1.7.1.2	IpAddress	not-accessible	The remote IP address of this entry's BGP peer.
USD usdBgpExchangedAfiSafiPeerAfi	1.3.6.1.4.1.4874.2.2.29.1.7.1.3	UsdBgpAfi	not-accessible	The AFI which we exchange with this peer.
USD usdBgpExchangedAfiSafiPeerSafi	1.3.6.1.4.1.4874.2.2.29.1.7.1.4	UsdBgpSafi	not-accessible	The SAFI which we exchange with this peer.
ROW usdBgpExchangedAfiSafiPeerRowStatus	1.3.6.1.4.1.4874.2.2.29.1.7.1.5	RowStatus	read-only	Should always be active according to the Row Status convention.
usdBgpPeerAddressFamilyTable	1.3.6.1.4.1.4874.2.2.29.1.8		not-accessible	The Unisphere BGP Peer Address Family Table describes the BGP-specific attributes of an Address Family for a peer.
usdBgpPeerAddressFamilyEntry	1.3.6.1.4.1.4874.2.2.29.1.8.1		not-accessible	The BGP ExchangedAfiSafi Peer Entry describes a BGP-specific AFI/SAFIs exchanged by one peer.
USD usdBgpPeerAddressFamilyVrfName	1.3.6.1.4.1.4874.2.2.29.1.8.1.1	UsdVrfName	not-accessible	The name of the VPN Routing Forwarding (VRF) instance in which this peer is configured. The empty string indicates that this peer is not in a VRF.
USD usdBgpPeerAddressFamilyAfi	1.3.6.1.4.1.4874.2.2.29.1.8.1.2	UsdBgpAfi	not-accessible	The AFI of the address-family in which this peer is configured.
USD usdBgpPeerAddressFamilySafi	1.3.6.1.4.1.4874.2.2.29.1.8.1.3	UsdBgpSafi	not-accessible	The SAFI of the address-family in which this peer is configured.
IP usdBgpPeerAddressFamilyRemoteAddress	1.3.6.1.4.1.4874.2.2.29.1.8.1.4	IpAddress	not-accessible	The remote IP address of this entry's BGP peer.
STR usdBgpPeerAddressFamilyPeerGroup	1.3.6.1.4.1.4874.2.2.29.1.8.1.5	DisplayString	read-create	Peer group membership (null if none).
T/F usdBgpPeerAddressFamilyDefaultOriginate	1.3.6.1.4.1.4874.2.2.29.1.8.1.6	TruthValue	read-create	Set this object to true(1) in order to advertise a default route to this peer, if present.
T/F usdBgpPeerAddressFamilyNextHopSelf	1.3.6.1.4.1.4874.2.2.29.1.8.1.7	TruthValue	read-create	Set this object to true(1) in order to always advertise this router as the next hop.
T/F usdBgpPeerAddressFamilySendCommunity	1.3.6.1.4.1.4874.2.2.29.1.8.1.8	TruthValue	read-create	Set this object to true(1) in order to send COMMUNITIES attributes in updates.
STR usdBgpPeerAddressFamilyDistributeListIn	1.3.6.1.4.1.4874.2.2.29.1.8.1.9	DisplayString	read-create	The inbound distribute IP access list name.
STR usdBgpPeerAddressFamilyDistributeListOut	1.3.6.1.4.1.4874.2.2.29.1.8.1.10	DisplayString	read-create	The outbound distribute IP access list name.
STR usdBgpPeerAddressFamilyPrefixListIn	1.3.6.1.4.1.4874.2.2.29.1.8.1.11	DisplayString	read-create	The inbound IP prefix list name.
STR usdBgpPeerAddressFamilyPrefixListOut	1.3.6.1.4.1.4874.2.2.29.1.8.1.12	DisplayString	read-create	The outbound IP prefix list name.
STR usdBgpPeerAddressFamilyPrefixTreeIn	1.3.6.1.4.1.4874.2.2.29.1.8.1.13	DisplayString	read-create	The inbound IP prefix tree name.
STR usdBgpPeerAddressFamilyPrefixTreeOut	1.3.6.1.4.1.4874.2.2.29.1.8.1.14	DisplayString	read-create	The outbound IP prefix tree name.
STR usdBgpPeerAddressFamilyFilterListIn	1.3.6.1.4.1.4874.2.2.29.1.8.1.15	DisplayString	read-create	The inbound filter AS path list name.
STR usdBgpPeerAddressFamilyFilterListOut	1.3.6.1.4.1.4874.2.2.29.1.8.1.16	DisplayString	read-create	The outbound filter AS path list name.
STR usdBgpPeerAddressFamilyFilterListWeight	1.3.6.1.4.1.4874.2.2.29.1.8.1.17	DisplayString	read-create	The weight filter AS path list name.
U32 usdBgpPeerAddressFamilyFilterListWeightValue	1.3.6.1.4.1.4874.2.2.29.1.8.1.18	Unsigned32	read-create	The weight to apply on weight filter list matches.
STR usdBgpPeerAddressFamilyRouteMapIn	1.3.6.1.4.1.4874.2.2.29.1.8.1.19	DisplayString	read-create	The inbound route-map name. An empty string means no inbound route-map.
STR usdBgpPeerAddressFamilyRouteMapOut	1.3.6.1.4.1.4874.2.2.29.1.8.1.20	DisplayString	read-create	The outbound route-map name. An empty string means no outbound route-map.
T/F usdBgpPeerAddressFamilyRouteReflectorClient	1.3.6.1.4.1.4874.2.2.29.1.8.1.21	TruthValue	read-create	The peer is a route reflector client.
U32 usdBgpPeerAddressFamilyRouteLimitWarn	1.3.6.1.4.1.4874.2.2.29.1.8.1.22	Unsigned32	read-create	Log a warning if pathCount exceeds this value.
U32 usdBgpPeerAddressFamilyRouteLimitReset	1.3.6.1.4.1.4874.2.2.29.1.8.1.23	Unsigned32	read-create	Reset connection is pathCount exceeds this value.
T/F usdBgpPeerAddressFamilyRouteLimitWarnOnly	1.3.6.1.4.1.4874.2.2.29.1.8.1.24	TruthValue	read-create	Warn, but do not reset, if the path limit is exceeded.
T/F usdBgpPeerAddressFamilyRemovePrivateAs	1.3.6.1.4.1.4874.2.2.29.1.8.1.25	TruthValue	read-create	Remove private AS numbers from AS paths.
STR usdBgpPeerAddressFamilyUnsuppressMap	1.3.6.1.4.1.4874.2.2.29.1.8.1.26	DisplayString	read-create	The unsuppress route-map name. Routes which are sent to this peer and which match this route-map are not subject to suppression by summary-only aggregates. An empty string means no unsuppress route-map.
T/F usdBgpPeerAddressFamilyInboundSoftReconfig	1.3.6.1.4.1.4874.2.2.29.1.8.1.27	TruthValue	read-create	Inbound soft-reconfiguration is enabled. If inbound soft-reconfiguration is enabled we keep a copy of each received route before inbound policy was applied.
USD usdBgpPeerAddressFamilyResetConnectionType	1.3.6.1.4.1.4874.2.2.29.1.8.1.28	UsdBgpResetConnectionType	read-create	Writing a value to this object causes one individual address family within the session to the peer to be cleared; the value determines what type of clear is executed (hard clear, soft clear in, soft clear out, etc.). Note that hard clearing an address family within a session will bounce the session and thus also affect the other address families in the session. Reading this object has no effect and always returns resetTypeNoop.
ROW usdBgpPeerAddressFamilyRowStatus	1.3.6.1.4.1.4874.2.2.29.1.8.1.29	RowStatus	read-create	Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: usdBgpPeerRemoteAs
T/F usdBgpPeerAddressFamilyAsOverride	1.3.6.1.4.1.4874.2.2.29.1.8.1.30	TruthValue	read-create	Replace the AS number of the peer by our own AS number in the AS-path attribute in UPDATEs sent to this peer.
INT usdBgpPeerAddressFamilyAllowAsIn	1.3.6.1.4.1.4874.2.2.29.1.8.1.31	INTEGER	read-create	The maximum number of times our own AS number is allowed to occur in a received AS-path before that received route is considered to be a loop and therefore rejected.
T/F usdBgpPeerAddressFamilySendExtendedCommunity	1.3.6.1.4.1.4874.2.2.29.1.8.1.32	TruthValue	read-create	Set this object to true(1) in order to send EXTENDED-COMMUNITIES attributes in updates.
BIT usdBgpPeerAddressFamilyUnconfiguredAttributes	1.3.6.1.4.1.4874.2.2.29.1.8.1.44	Bits	read-create	On get each bit indicates whether the corresponding attribute is configured or unconfigured: 0 = The attribute is configured (i.e. the configured value is the operational value). 1 = The attribute is unconfigured (i.e. the operational value is inherited from the a higher level which could be the default value). Getting the attribute value itself always returns the operational value of that attribute regardless of whether the attribute is configured or unconfigured. On write each bit indicates wheter or not the corresponding attribute should be set to the unconfigured state: 0 = No operation (i.e. do not change the state of the attribute). 1 = Set the attribute to the unconfigured state. Setting an attribute to a value has the automatic side-effect of setting the bit with the same name to zero.
usdBgpPeerGroupTable	1.3.6.1.4.1.4874.2.2.29.1.9		not-accessible	The Unisphere BGP Peer Group Table describes the BGP-specific characteristics of peer groups.
usdBgpPeerGroupEntry	1.3.6.1.4.1.4874.2.2.29.1.9.1		not-accessible	The BGP Peer Group Entry describes BGP-specific characteristics of one peer group.
USD usdBgpPeerGroupVrfName	1.3.6.1.4.1.4874.2.2.29.1.9.1.1	UsdVrfName	not-accessible	The name of the VPN Routing Forwarding (VRF) instance in which this peer-group is configured. The empty string indicates that this peer-group is not in a VRF.
STR usdBgpPeerGroupGroupName	1.3.6.1.4.1.4874.2.2.29.1.9.1.2	DisplayString	not-accessible	The name of the Peer group this instance configures.
INT usdBgpPeerGroupAdminStatus	1.3.6.1.4.1.4874.2.2.29.1.9.1.3	INTEGER	read-create	The desired state of the BGP connection. A transition from 'stop' to 'start' will cause the BGP Start Event to be generated. A transition from 'start' to 'stop' will cause the BGP Stop Event to be generated. This parameter can be used to restart BGP peer connections. Care should be used in providing write access to this object without adequate authentication.
INT usdBgpPeerGroupRemoteAsNumber	1.3.6.1.4.1.4874.2.2.29.1.9.1.4	INTEGER	read-create	The peer's autonomous system number. This object can only be set at row creation.
INT usdBgpPeerGroupRetryInterval	1.3.6.1.4.1.4874.2.2.29.1.9.1.5	INTEGER	read-create	Time interval in seconds for the ConnectRetry timer. The suggested value for this timer is 120 seconds.
INT usdBgpPeerGroupConfigHoldTime	1.3.6.1.4.1.4874.2.2.29.1.9.1.6	INTEGER	read-create	Time interval in seconds for the Hold Time configured for this BGP speaker with this peer. This value is placed in an OPEN message sent to this peer by this BGP speaker, and is compared with the Hold Time field in an OPEN message received from the peer when determining the Hold Time (bgpPeerHoldTime) with the peer. This value must not be less than three seconds if it is not zero (0) in which case the Hold Time is NOT to be established with the peer. The suggested value for this timer is 90 seconds.
INT usdBgpPeerGroupConfigKeepAliveInterval	1.3.6.1.4.1.4874.2.2.29.1.9.1.7	INTEGER	read-create	Time interval in seconds for the KeepAlive timer configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE messages' frequency relative to the value specified in bgpPeerHoldTimeConfigured; the actual time interval for the KEEPALIVE messages is indicated by bgpPeerKeepAlive. A reasonable maximum value for this timer would be configured to be one third of that of bgpPeerHoldTimeConfigured. If the value of this object is zero (0), no periodical KEEPALIVE messages are sent to the peer after the BGP connection has been established. The suggested value for this timer is 30 seconds.
INT usdBgpPeerGroupAsOriginationInterval	1.3.6.1.4.1.4874.2.2.29.1.9.1.8	INTEGER	read-create	Time interval in seconds for the MinASOriginationInterval timer. The suggested value for this timer is 10 seconds.
INT usdBgpPeerGroupAdvertisementInterval	1.3.6.1.4.1.4874.2.2.29.1.9.1.9	INTEGER	read-create	Time interval in seconds for the MinRouteAdvertisementInterval timer. The suggested value for this timer is 30 seconds.
STR usdBgpPeerGroupDescription	1.3.6.1.4.1.4874.2.2.29.1.9.1.10	DisplayString	read-create	Peer textual description.
U32 usdBgpPeerGroupWeight	1.3.6.1.4.1.4874.2.2.29.1.9.1.11	Unsigned32	read-create	The weight assigned to routes learned from peer.
T/F usdBgpPeerGroupEbgpMultihop	1.3.6.1.4.1.4874.2.2.29.1.9.1.12	TruthValue	read-create	The EBGP multihop is enabled.
INT usdBgpPeerGroupEbgpMultihopTtl	1.3.6.1.4.1.4874.2.2.29.1.9.1.13	INTEGER	read-create	Maximum number of hops to the external peer (only relevant if EBGP multihop turned on).
IP usdBgpPeerGroupUpdateSource	1.3.6.1.4.1.4874.2.2.29.1.9.1.14	IpAddress	read-create	The source IP address for peer connections.
OCT usdBgpPeerGroupMd5Password	1.3.6.1.4.1.4874.2.2.29.1.9.1.15	OCTET STRING	read-create	The password for MD5 authentication. Reading this object always results in an OCTET STRING of length zero.
U32 usdBgpPeerGroupMaxUpdateSize	1.3.6.1.4.1.4874.2.2.29.1.9.1.16	Unsigned32	read-create	The maximum size in bytes of transmitted UPDATE messages.
USD usdBgpPeerGroupResetConnectionType	1.3.6.1.4.1.4874.2.2.29.1.9.1.17	UsdBgpResetConnectionType	read-create	Writing a value to this object causes the sessions to all peers in the peer-group to be cleared; the value determines what type of clear is executed (hard clear, soft clear in, soft clear out, etc.). Reading this object has no effect and always returns resetTypeNoop.
ROW usdBgpPeerGroupRowStatus	1.3.6.1.4.1.4874.2.2.29.1.9.1.18	RowStatus	read-create	Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: usdBgpPeerGroupRemoteAs
INT usdBgpPeerGroupLocalAsNumber	1.3.6.1.4.1.4874.2.2.29.1.9.1.19	INTEGER	read-create	The local autonomous system number to be used for members of this peer-group. Value zero (0) means that the global local automous system number (as specified in the object usdBgpLocalAsNumber) is used.
BIT usdBgpPeerGroupUnconfiguredAttributes	1.3.6.1.4.1.4874.2.2.29.1.9.1.27	Bits	read-create	On get each bit indicates whether the corresponding attribute is configured or unconfigured: 0 = The attribute is configured (i.e. the configured value is the operational value). 1 = The attribute is unconfigured (i.e. the operational value is inherited from the a higher level which could be the default value). Getting the attribute value itself always returns the operational value of that attribute regardless of whether the attribute is configured or unconfigured. On write each bit indicates wheter or not the corresponding attribute should be set to the unconfigured state: 0 = No operation (i.e. do not change the state of the attribute). 1 = Set the attribute to the unconfigured state. Setting an attribute to a value has the automatic side-effect of setting the bit with the same name to zero.
usdBgpPeerGroupAddressFamilyTable	1.3.6.1.4.1.4874.2.2.29.1.10		not-accessible	The Unisphere BGP Peer Group Address Family Table describes the BGP-specific attributes of an Address Family for a peer group.
usdBgpPeerGroupAddressFamilyEntry	1.3.6.1.4.1.4874.2.2.29.1.10.1		not-accessible	The BGP Peer Group Address Family Entry describes.
USD usdBgpPeerGroupAddressFamilyVrfName	1.3.6.1.4.1.4874.2.2.29.1.10.1.1	UsdVrfName	not-accessible	The name of the VPN Routing Forwarding (VRF) instance in which this peer-group is configured. The empty string indicates that this peer-group is not in a VRF.
USD usdBgpPeerGroupAddressFamilyAfi	1.3.6.1.4.1.4874.2.2.29.1.10.1.2	UsdBgpAfi	not-accessible	The AFI of the address-family in which this peer-group is configured.
USD usdBgpPeerGroupAddressFamilySafi	1.3.6.1.4.1.4874.2.2.29.1.10.1.3	UsdBgpSafi	not-accessible	The SAFI of the address-family in which this peer-group is configured.
STR usdBgpPeerGroupGroupAddressFamilyGroupName	1.3.6.1.4.1.4874.2.2.29.1.10.1.4	DisplayString	not-accessible	The name of the Peer group this instance configures.
T/F usdBgpPeerGroupAddressFamilyDefaultOriginate	1.3.6.1.4.1.4874.2.2.29.1.10.1.5	TruthValue	read-create	Set this object to true(1) in order to advertise a default route to this peer, if present.
T/F usdBgpPeerGroupAddressFamilyNextHopSelf	1.3.6.1.4.1.4874.2.2.29.1.10.1.6	TruthValue	read-create	Set this object to true(1) in order to always advertise this router as the next hop.
T/F usdBgpPeerGroupAddressFamilySendCommunity	1.3.6.1.4.1.4874.2.2.29.1.10.1.7	TruthValue	read-create	Set this object to true(1) in order to send COMMUNITIES attributes in updates.
STR usdBgpPeerGroupAddressFamilyDistributeListIn	1.3.6.1.4.1.4874.2.2.29.1.10.1.8	DisplayString	read-create	The inbound distribute IP access list name.
STR usdBgpPeerGroupAddressFamilyDistributeListOut	1.3.6.1.4.1.4874.2.2.29.1.10.1.9	DisplayString	read-create	The outbound distribute IP access list name.
STR usdBgpPeerGroupAddressFamilyPrefixListIn	1.3.6.1.4.1.4874.2.2.29.1.10.1.10	DisplayString	read-create	The inbound IP prefix list name.
STR usdBgpPeerGroupAddressFamilyPrefixListOut	1.3.6.1.4.1.4874.2.2.29.1.10.1.11	DisplayString	read-create	The outbound IP prefix list name.
STR usdBgpPeerGroupAddressFamilyPrefixTreeIn	1.3.6.1.4.1.4874.2.2.29.1.10.1.12	DisplayString	read-create	The inbound IP prefix tree name.
STR usdBgpPeerGroupAddressFamilyPrefixTreeOut	1.3.6.1.4.1.4874.2.2.29.1.10.1.13	DisplayString	read-create	The outbound IP prefix tree name.
STR usdBgpPeerGroupAddressFamilyFilterListIn	1.3.6.1.4.1.4874.2.2.29.1.10.1.14	DisplayString	read-create	The inbound filter AS path list name.
STR usdBgpPeerGroupAddressFamilyFilterListOut	1.3.6.1.4.1.4874.2.2.29.1.10.1.15	DisplayString	read-create	The outbound filter AS path list name.
STR usdBgpPeerGroupAddressFamilyFilterListWeight	1.3.6.1.4.1.4874.2.2.29.1.10.1.16	DisplayString	read-create	The weight filter AS path list name.
U32 usdBgpPeerGroupAddressFamilyFilterListWeightValue	1.3.6.1.4.1.4874.2.2.29.1.10.1.17	Unsigned32	read-create	The weight to apply on weight filter list matches.
STR usdBgpPeerGroupAddressFamilyRouteMapIn	1.3.6.1.4.1.4874.2.2.29.1.10.1.18	DisplayString	read-create	The inbound route-map name. An empty string means no inbound route-map.
STR usdBgpPeerGroupAddressFamilyRouteMapOut	1.3.6.1.4.1.4874.2.2.29.1.10.1.19	DisplayString	read-create	The outbound route-map name. An empty string means no outbound route-map.
T/F usdBgpPeerGroupAddressFamilyRouteReflectorClient	1.3.6.1.4.1.4874.2.2.29.1.10.1.20	TruthValue	read-create	The peer is a route reflector client.
U32 usdBgpPeerGroupAddressFamilyRouteLimitWarn	1.3.6.1.4.1.4874.2.2.29.1.10.1.21	Unsigned32	read-create	Log a warning if pathCount exceeds this value.
U32 usdBgpPeerGroupAddressFamilyRouteLimitReset	1.3.6.1.4.1.4874.2.2.29.1.10.1.22	Unsigned32	read-create	Reset connection is pathCount exceeds this value.
T/F usdBgpPeerGroupAddressFamilyRouteLimitWarnOnly	1.3.6.1.4.1.4874.2.2.29.1.10.1.23	TruthValue	read-create	Warn, but do not reset, if the path limit is exceeded.
T/F usdBgpPeerGroupAddressFamilyRemovePrivateAs	1.3.6.1.4.1.4874.2.2.29.1.10.1.24	TruthValue	read-create	Remove private AS numbers from AS paths.
STR usdBgpPeerGroupAddressFamilyUnsuppressMap	1.3.6.1.4.1.4874.2.2.29.1.10.1.25	DisplayString	read-create	The unsuppress route-map name. Routes which are sent to this peer and which match this route-map are not subject to suppression by summary-only aggregates. An empty string means no unsuppress route-map.
T/F usdBgpPeerGroupAddressFamilyInboundSoftReconfig	1.3.6.1.4.1.4874.2.2.29.1.10.1.26	TruthValue	read-create	Inbound soft-reconfiguration is enabled. If inbound soft-reconfiguration is enabled we keep a copy of each received route before inbound policy was applied.
USD usdBgpPeerGroupAddressFamilyResetConnectionType	1.3.6.1.4.1.4874.2.2.29.1.10.1.27	UsdBgpResetConnectionType	read-create	Writing a value to this object causes one individual address family within the sessions to all peers in the peer-group to be cleared; the value determines what type of clear is executed (hard clear, soft clear in, soft clear out, etc.). Note that hard clearing an address family within a session will bounce the session and thus also affect the other address families in the session. Reading this object has no effect and always returns resetTypeNoop.
ROW usdBgpPeerGroupAddressFamilyRowStatus	1.3.6.1.4.1.4874.2.2.29.1.10.1.28	RowStatus	read-create	Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: usdBgpPeerGroupRemoteAs
T/F usdBgpPeerGroupAddressFamilyAsOverride	1.3.6.1.4.1.4874.2.2.29.1.10.1.29	TruthValue	read-create	Replace the AS number of the peer by our own AS number in the AS-path attribute in UPDATEs sent to this peer-group.
INT usdBgpPeerGroupAddressFamilyAllowAsIn	1.3.6.1.4.1.4874.2.2.29.1.10.1.30	INTEGER	read-create	The maximum number of times our own AS number is allowed to occur in a received AS-path before that received route is considered to be a loop and therefore rejected.
T/F usdBgpPeerGroupAddressFamilySendExtendedCommunity	1.3.6.1.4.1.4874.2.2.29.1.10.1.31	TruthValue	read-create	Set this object to true(1) in order to send EXTENDED-COMMUNITIES attributes in updates.
BIT usdBgpPeerGroupAddressFamilyUnconfiguredAttributes	1.3.6.1.4.1.4874.2.2.29.1.10.1.35	Bits	read-create	On get each bit indicates whether the corresponding attribute is configured or unconfigured: 0 = The attribute is configured (i.e. the configured value is the operational value). 1 = The attribute is unconfigured (i.e. the operational value is inherited from the a higher level which could be the default value). Getting the attribute value itself always returns the operational value of that attribute regardless of whether the attribute is configured or unconfigured. On write each bit indicates wheter or not the corresponding attribute should be set to the unconfigured state: 0 = No operation (i.e. do not change the state of the attribute). 1 = Set the attribute to the unconfigured state. Setting an attribute to a value has the automatic side-effect of setting the bit with the same name to zero.
usdBgpRouteFlapHistoryTable	1.3.6.1.4.1.4874.2.2.29.1.12		not-accessible	The obsolete BGP Route Flap History Table contained information about recorded route flap events. This table has been replaced by the usdBgpNewRouteFlapHistoryTable.
usdBgpRouteFlapHistoryEntry	1.3.6.1.4.1.4874.2.2.29.1.12.1		not-accessible	An instance in the list of route flap events.
INT usdBgpRouteFlapState	1.3.6.1.4.1.4874.2.2.29.1.12.1.1	INTEGER	read-only	Current state: stateAvailable(1) - indicates path is available stateSuppressedReachable(2) - indicates path is suppressed, destination is reachable stateSuppressedUnreachable(3) - indicates path in suppressed, destination is not reachable
U32 usdBgpRouteFlapFigureOfMerit	1.3.6.1.4.1.4874.2.2.29.1.12.1.2	Unsigned32	read-only	Calculated figure-of-merit.
U32 usdBgpRouteFlapRemainingTime	1.3.6.1.4.1.4874.2.2.29.1.12.1.3	Unsigned32	read-only	Number of seconds until reuse or removal.
U32 usdBgpRouteFlapSuppressThreshold	1.3.6.1.4.1.4874.2.2.29.1.12.1.4	Unsigned32	read-only	Damping cutoff threshold (scaled).
U32 usdBgpRouteFlapReuseThreshold	1.3.6.1.4.1.4874.2.2.29.1.12.1.5	Unsigned32	read-only	Damping reuse threshold (scaled).
U32 usdBgpRouteFlapMaxHoldDownTime	1.3.6.1.4.1.4874.2.2.29.1.12.1.6	Unsigned32	read-only	Maximum route holddown time (seconds).
U32 usdBgpRouteFlapHalfLifeReachable	1.3.6.1.4.1.4874.2.2.29.1.12.1.7	Unsigned32	read-only	Figure of merit half life for reachable routes (seconds).
U32 usdBgpRouteFlapHalfLifeUnreachable	1.3.6.1.4.1.4874.2.2.29.1.12.1.8	Unsigned32	read-only	Figure of merit half life for unreachable routes (seconds).
usdBgpRouteTable	1.3.6.1.4.1.4874.2.2.29.1.13		not-accessible	The obsolete BGP-4 Received Path Attribute Table contained additional information about paths to destination networks received from all BGP4 peers. This table has been replaced by the usdBgpNewRouteTable.
usdBgpRouteEntry	1.3.6.1.4.1.4874.2.2.29.1.13.1		not-accessible	Additional information about a path to a network.
IP usdBgpRouteOriginatorId	1.3.6.1.4.1.4874.2.2.29.1.13.1.1	IpAddress	read-only	The Originator-ID path attribute of the route if present. The usdBgpRouteOriginatorIdPresent object indicates whether the Originator-ID path attribute is present.
T/F usdBgpRouteAtomicAggregatePresent	1.3.6.1.4.1.4874.2.2.29.1.13.1.2	TruthValue	read-only	Atomic-Aggregate path attribute is present.
T/F usdBgpRouteMedPresent	1.3.6.1.4.1.4874.2.2.29.1.13.1.3	TruthValue	read-only	The Multi-Exit-Discriminator path attribute is present.
T/F usdBgpRouteLocalPrefPresent	1.3.6.1.4.1.4874.2.2.29.1.13.1.4	TruthValue	read-only	The Local-Pref path attribute is present.
T/F usdBgpRouteAggregatorPresent	1.3.6.1.4.1.4874.2.2.29.1.13.1.5	TruthValue	read-only	The Aggregator path attribute is present.
T/F usdBgpRouteCommunitiesPresent	1.3.6.1.4.1.4874.2.2.29.1.13.1.6	TruthValue	read-only	The Communities path attribute is present.
T/F usdBgpRouteOriginatorIdPresent	1.3.6.1.4.1.4874.2.2.29.1.13.1.7	TruthValue	read-only	The Originator-ID path attribute is present.
T/F usdBgpRouteClusterListPresent	1.3.6.1.4.1.4874.2.2.29.1.13.1.8	TruthValue	read-only	The Cluster-List path attribute is present.
U32 usdBgpRouteWeight	1.3.6.1.4.1.4874.2.2.29.1.13.1.9	Unsigned32	read-only	The weight of the route.
USD usdBgpRouteVrfName	1.3.6.1.4.1.4874.2.2.29.1.13.1.10	UsdVrfName	not-accessible	The name of the VPN Routing Forwarding (VRF) instance in which this route is present. The empty string indicates that this route is not in a VRF.
USD usdBgpRouteAfi	1.3.6.1.4.1.4874.2.2.29.1.13.1.11	UsdBgpAfi	not-accessible	The AFI of the address-family in which this route is present.
USD usdBgpRouteSafi	1.3.6.1.4.1.4874.2.2.29.1.13.1.12	UsdBgpSafi	not-accessible	The SAFI of the address-family in which this route is present.
IP usdBgpRoutePeer	1.3.6.1.4.1.4874.2.2.29.1.13.1.13	IpAddress	not-accessible	The IP address of the peer from which the route was received. This object has value 0.0.0.0 is the route was a locally originated route.
INT usdBgpRouteIpAddrPrefixLen	1.3.6.1.4.1.4874.2.2.29.1.13.1.14	INTEGER	not-accessible	Length in bits of the IP address prefix of the route.
IP usdBgpRouteIpAddrPrefix	1.3.6.1.4.1.4874.2.2.29.1.13.1.15	IpAddress	not-accessible	The IP address prefix of the route. This object is an IP address containing the prefix with length specified by usdBgpNewRouteIpAddrPrefixLen. Any bits beyond the length specified by usdBgpNewRouteIpAddrPrefixLen are zeroed.
INT usdBgpRouteRouteType	1.3.6.1.4.1.4874.2.2.29.1.13.1.16	INTEGER	not-accessible	The type of the route.
INT usdBgpRouteOrigin	1.3.6.1.4.1.4874.2.2.29.1.13.1.17	INTEGER	read-only	The value of the Origin path attribute.
OCT usdBgpRouteASPathSegment	1.3.6.1.4.1.4874.2.2.29.1.13.1.18	OCTET STRING	read-only	The value of the AS-path path attribute (as encoded in the received update message).
IP usdBgpRouteNextHop	1.3.6.1.4.1.4874.2.2.29.1.13.1.19	IpAddress	read-only	The value of the Next-Hop path attribute.
U32 usdBgpRouteMultiExitDisc	1.3.6.1.4.1.4874.2.2.29.1.13.1.20	Unsigned32	read-only	The value of the Multi-Exit-Discriminator path attribute if present. The usdBgpRouteMedPresent object indicates whether the Multi-Exit-Discriminator path attribute is present.
U32 usdBgpRouteLocalPref	1.3.6.1.4.1.4874.2.2.29.1.13.1.21	Unsigned32	read-only	The value of the Local-Pref path attribute if present. The usdBgpRouteLocalPrefPresent object indicates whether the Local-Pref path attribute is present.
INT usdBgpRouteAtomicAggregate	1.3.6.1.4.1.4874.2.2.29.1.13.1.22	INTEGER	read-only	Whether or not the local system has selected a less specific route without selecting a more specific route.
INT usdBgpRouteAggregatorAS	1.3.6.1.4.1.4874.2.2.29.1.13.1.23	INTEGER	read-only	The value of the AS field in the Aggregator path attribute if present. The usdBgpRouteAggregatorPresent object indicates whether the Aggregator path attribute is present.
IP usdBgpRouteAggregatorAddress	1.3.6.1.4.1.4874.2.2.29.1.13.1.24	IpAddress	read-only	The value of the address field in the Aggregator path attribute if present. The usdBgpRouteAggregatorPresent object indicates whether the Aggregator path attribute is present.
T/F usdBgpRouteBestInIpRouteTable	1.3.6.1.4.1.4874.2.2.29.1.13.1.25	TruthValue	read-only	When BGP places a routes in the IP route table, that route may not be used for forwarding traffic if there are other routes (e.g. IGP routes or static routes) to that same prefix with a better administrative distance in the IP route table. This object indicates whether or not the BGP route in the IP route table is the best route (and hence is used for forwarding traffic).
OCT usdBgpRouteUnknown	1.3.6.1.4.1.4874.2.2.29.1.13.1.26	OCTET STRING	read-only	One or more path attributes not understood by this BGP4 speaker. Size zero (0) indicates the absence of such attribute(s). Octets beyond the maximum size, if any, are not recorded by this object.
T/F usdBgpRouteExtendedCommunitiesPresent	1.3.6.1.4.1.4874.2.2.29.1.13.1.27	TruthValue	read-only	Is the Extended-Communities path attribute present?
T/F usdBgpRouteValid	1.3.6.1.4.1.4874.2.2.29.1.13.1.28	TruthValue	read-only	Is the route valid? The route is declared invalid if there is something wrong with it which is not serious enough for sending a notification, but it serious enough for not placing it in the IP route table or propagating it to other peers (for example the next-hop of the route is a local address).
INT usdBgpRouteSuppressedBy	1.3.6.1.4.1.4874.2.2.29.1.13.1.29	INTEGER	read-only	Indicates whether or not the route is suppressed, and if so why: suppressedByNothing - Route is not suppressed. suppressedByAggregate - Route is suppressed by a summary-only aggregate. suppressedByAutoSummary - Route is suppressed by an auto-summary. suppressedByDampening - Route is suppressed as a result of route-flap dampening.
T/F usdBgpRouteNextHopReachable	1.3.6.1.4.1.4874.2.2.29.1.13.1.30	TruthValue	read-only	Is the indirect next-hop of the route reachable (i.e. can the indirect next-hop of the route be resolved to at least one direct next-hop)?
T/F usdBgpRouteSynchronizedWithIgp	1.3.6.1.4.1.4874.2.2.29.1.13.1.31	TruthValue	read-only	Is the route is synchronized (i.e. is there is an IGP route to the same prefix in the IP route table)?
T/F usdBgpRoutePlaceInIpRouteTable	1.3.6.1.4.1.4874.2.2.29.1.13.1.32	TruthValue	read-only	Has a BGP route for this prefix been placed in the IP route table?
T/F usdBgpRouteAdvertiseToExternalPeers	1.3.6.1.4.1.4874.2.2.29.1.13.1.33	TruthValue	read-only	Should this route be advertised to external peers?
T/F usdBgpRouteAdvertiseToInternalPeers	1.3.6.1.4.1.4874.2.2.29.1.13.1.34	TruthValue	read-only	Should this route be advertised to internal peers?
OCT usdBgpRouteDistinguisher	1.3.6.1.4.1.4874.2.2.29.1.13.1.35	OCTET STRING	read-only	The Route Distinguisher (RD) of the route. This object has an undefined value for non-VPN routes.
U32 usdBgpRouteMplsLabel	1.3.6.1.4.1.4874.2.2.29.1.13.1.36	Unsigned32	read-only	The MPLS label for the route.
U32 usdBgpRouteNextHopMetric	1.3.6.1.4.1.4874.2.2.29.1.13.1.37	Unsigned32	read-only	The metric of direct next-hop of this BGP route.
usdBgpRouteCommunityTable	1.3.6.1.4.1.4874.2.2.29.1.14		not-accessible	The obsolete BGP-4 Path Community Table contained information about communities within destination networks received from all BGP4 peers. This table has been replaced by the usdBgpNewRouteCommunityTable.
usdBgpRouteCommunityEntry	1.3.6.1.4.1.4874.2.2.29.1.14.1		not-accessible	Community attribute information within a path to a network.
U32 usdBgpRouteCommunityNumber	1.3.6.1.4.1.4874.2.2.29.1.14.1.1	Unsigned32	read-only	The community number.
usdBgpRouteClusterIdTable	1.3.6.1.4.1.4874.2.2.29.1.15		not-accessible	The obsolete BGP-4 Path ClusterId Table contained information about router reflector cluster IDs. This table has been replaced by the usdBgpNewRouteClusterIdTable.
usdBgpRouteClusterIdEntry	1.3.6.1.4.1.4874.2.2.29.1.15.1		not-accessible	ClusterId attribute information within a path to a network.
U32 usdBgpRouteClusterId	1.3.6.1.4.1.4874.2.2.29.1.15.1.1	Unsigned32	read-only	The cluster id.
usdBgpNetworkTable	1.3.6.1.4.1.4874.2.2.29.1.16		not-accessible	The BGP Network Table controls what networks are originated by this BGP router.
usdBgpNetworkEntry	1.3.6.1.4.1.4874.2.2.29.1.16.1		not-accessible	An instance in the list of networks originated by this BGP router.
USD usdBgpNetworkVrfName	1.3.6.1.4.1.4874.2.2.29.1.16.1.1	UsdVrfName	not-accessible	The name of the VPN Routing Forwarding (VRF) instance in which this network is configured. The empty string indicates that this network is not in a VRF.
USD usdBgpNetworkAfi	1.3.6.1.4.1.4874.2.2.29.1.16.1.2	UsdBgpAfi	not-accessible	The AFI of the address-family in which this network is configured.
USD usdBgpNetworkSafi	1.3.6.1.4.1.4874.2.2.29.1.16.1.3	UsdBgpSafi	not-accessible	The SAFI of the address-family in which this network is configured.
IP usdBgpNetworkIpAddrPrefix	1.3.6.1.4.1.4874.2.2.29.1.16.1.4	IpAddress	not-accessible	An IP address prefix in the Network Layer Reachability Information field. This object is an IP address containing the prefix with length specified by bgpRouteIpAddrPrefixLen. Any bits beyond the length specified by bgpRouteIpAddrPrefixLen are zeroed.
INT usdBgpNetworkIpAddrPrefixLen	1.3.6.1.4.1.4874.2.2.29.1.16.1.5	INTEGER	not-accessible	Length in bits of the IP address prefix in the Network Layer Reachability Information field.
T/F usdBgpNetworkBackdoor	1.3.6.1.4.1.4874.2.2.29.1.16.1.6	TruthValue	read-create	Set this object to true(1) in order to enable BGP backdoor in this network. This object can only be set at row creation.
ROW usdBgpNetworkRowStatus	1.3.6.1.4.1.4874.2.2.29.1.16.1.7	RowStatus	read-create	Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy
T/F usdBgpNetworkWeightSpecified	1.3.6.1.4.1.4874.2.2.29.1.16.1.8	TruthValue	read-create	If this object is set to true(1) then the BGP weight of this network is set to the value specified in usdBgpNetworkWeightValue. This object can only be set at row creation.
INT usdBgpNetworkWeight	1.3.6.1.4.1.4874.2.2.29.1.16.1.9	INTEGER	read-create	If usdBgpNetworkWeight specified is set to true(1) then this object specifies the weight of the network. Otherwise the weight of the network is determined by the IGP metric of the prefix. This object can only be set at row creation.
STR usdBgpNetworkRouteMap	1.3.6.1.4.1.4874.2.2.29.1.16.1.10	DisplayString	read-create	The name of the route-map used to set the path attributes of this network. A zero length route-map name means don't use a route-map for this. This object can only be set at row creation.
BIT usdBgpNetworkUnconfiguredAttributes	1.3.6.1.4.1.4874.2.2.29.1.16.1.11	Bits	read-create	On get each bit indicates whether the corresponding attribute is configured or unconfigured: 0 = The attribute is configured (i.e. the configured value is the operational value). 1 = The attribute is unconfigured (i.e. the operational value is inherited from the a higher level which could be the default value). Getting the attribute value itself always returns the operational value of that attribute regardless of whether the attribute is configured or unconfigured. On write each bit indicates wheter or not the corresponding attribute should be set to the unconfigured state: 0 = No operation (i.e. do not change the state of the attribute). 1 = Set the attribute to the unconfigured state. Setting an attribute to a value has the automatic side-effect of setting the bit with the same name to zero.
usdBgpAggregateTable	1.3.6.1.4.1.4874.2.2.29.1.17		not-accessible	The BGP Aggregate Table controls the consolidation of route information.
usdBgpAggregateEntry	1.3.6.1.4.1.4874.2.2.29.1.17.1		not-accessible	An instance in the list of route aggregation.
USD usdBgpAggregateVrfName	1.3.6.1.4.1.4874.2.2.29.1.17.1.1	UsdVrfName	not-accessible	The name of the VPN Routing Forwarding (VRF) instance in which this aggregate is configured. The empty string indicates that this aggregate is not in a VRF.
USD usdBgpAggregateAfi	1.3.6.1.4.1.4874.2.2.29.1.17.1.2	UsdBgpAfi	not-accessible	The AFI of the address-family in which this aggregate is configured.
USD usdBgpAggregateSafi	1.3.6.1.4.1.4874.2.2.29.1.17.1.3	UsdBgpSafi	not-accessible	The SAFI of the address-family in which this aggregate is configured.
IP usdBgpAggregateIpAddrPrefix	1.3.6.1.4.1.4874.2.2.29.1.17.1.4	IpAddress	not-accessible	An IP address prefix in the Network Layer Reachability Information field. This object is an IP address containing the prefix with length specified by bgpRouteIpAddrPrefixLen. Any bits beyond the length specified by bgpRouteIpAddrPrefixLen are zeroed.
INT usdBgpAggregateIpAddrPrefixLen	1.3.6.1.4.1.4874.2.2.29.1.17.1.5	INTEGER	not-accessible	Length in bits of the IP address prefix in the Network Layer Reachability Information field.
T/F usdBgpAggregateAsSet	1.3.6.1.4.1.4874.2.2.29.1.17.1.6	TruthValue	read-create	Set this object to true(1) in order to generate AS_set path information by creating an aggregate entry that consists of all elements contained in all paths that are being summarized. This object can only be set at row creation.
T/F usdBgpAggregateSummaryOnly	1.3.6.1.4.1.4874.2.2.29.1.17.1.7	TruthValue	read-create	Set this object to true(1) in order to filter specific routes from updates. By doing that, advertisements of more specific routes will be suppressed to all neighbors. This object can only be set at row creation.
STR usdBgpAggregateAttributeMap	1.3.6.1.4.1.4874.2.2.29.1.17.1.8	DisplayString	read-create	The name of the route-map used to set the attributes of the aggregate An empty string means no route-map for this purpose.
STR usdBgpAggregateAdvertiseMap	1.3.6.1.4.1.4874.2.2.29.1.17.1.9	DisplayString	read-create	The name of the route-map used to select routes covered by the aggregate (for as-set aggregates the path attributes of the aggregate route are created by summarizing the path attributes of the covered routes). An empty string means no route-map for this purpose.
ROW usdBgpAggregateRowStatus	1.3.6.1.4.1.4874.2.2.29.1.17.1.10	RowStatus	read-create	Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy
STR usdBgpAggregateSuppressMap	1.3.6.1.4.1.4874.2.2.29.1.17.1.11	DisplayString	read-create	The suppress route-map name. If a suppress route-map has been specified, all routes which are covered by the aggregate and which match the suppress route-map are suppressed. An empty string means no inbound route-map.
BIT usdBgpAggregateUnconfiguredAttributes	1.3.6.1.4.1.4874.2.2.29.1.17.1.12	Bits	read-create	On get each bit indicates whether the corresponding attribute is configured or unconfigured: 0 = The attribute is configured (i.e. the configured value is the operational value). 1 = The attribute is unconfigured (i.e. the operational value is inherited from the a higher level which could be the default value). Getting the attribute value itself always returns the operational value of that attribute regardless of whether the attribute is configured or unconfigured. On write each bit indicates wheter or not the corresponding attribute should be set to the unconfigured state: 0 = No operation (i.e. do not change the state of the attribute). 1 = Set the attribute to the unconfigured state. Setting an attribute to a value has the automatic side-effect of setting the bit with the same name to zero.
usdBgpVrfTable	1.3.6.1.4.1.4874.2.2.29.1.18		not-accessible	The Unisphere BGP VRF Table describes the BGP-specific characteristics of a VPN routing forwarding instance.
usdBgpVrfEntry	1.3.6.1.4.1.4874.2.2.29.1.18.1		not-accessible	The BGP VRF Entry describes BGP-specific characteristics of one VRF.
USD usdBgpVrfName	1.3.6.1.4.1.4874.2.2.29.1.18.1.1	UsdVrfName	not-accessible	The name of the VPN Routing Forwarding (VRF) instance.
T/F usdBgpVrfSynchronization	1.3.6.1.4.1.4874.2.2.29.1.18.1.2	TruthValue	read-create	Set this object to true(1) in order to have IGP route synchronization enabled.
T/F usdBgpVrfAutoSummary	1.3.6.1.4.1.4874.2.2.29.1.18.1.3	TruthValue	read-create	Set this object to true(1) in order to automatically summarize redistributed routes to their natural network mask.
INT usdBgpVrfExternalDistance	1.3.6.1.4.1.4874.2.2.29.1.18.1.4	INTEGER	read-create	The administrative distance for external routes.
INT usdBgpVrfInternalDistance	1.3.6.1.4.1.4874.2.2.29.1.18.1.5	INTEGER	read-create	The administrative distance for internal routes.
INT usdBgpVrfLocalDistance	1.3.6.1.4.1.4874.2.2.29.1.18.1.6	INTEGER	read-create	The administrative distance for local routes.
USD usdBgpVrfResetConnectionType	1.3.6.1.4.1.4874.2.2.29.1.18.1.7	UsdBgpResetConnectionType	read-create	Writing a value to this object causes the sessions to all peers in this VRF to be cleared; the value determines what type of clear is executed (hard clear, soft clear in, soft clear out, etc.). Reading this object has no effect and always returns resetTypeNoop.
ROW usdBgpVrfRowStatus	1.3.6.1.4.1.4874.2.2.29.1.18.1.8	RowStatus	read-create	Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy
INT usdBgpVrfOperationalState	1.3.6.1.4.1.4874.2.2.29.1.18.1.9	INTEGER	read-only	The BGP VRF operational state.
T/F usdBgpVrfAddUnicastRoutesToMulticastView	1.3.6.1.4.1.4874.2.2.29.1.18.1.10	TruthValue	read-create	Set this object to true(1) in order to add routes learnt by IPv4 Unicast BGP to the multicast route table.
BIT usdBgpVrfUnconfiguredAttributes	1.3.6.1.4.1.4874.2.2.29.1.18.1.13	Bits	read-create	On get each bit indicates whether the corresponding attribute is configured or unconfigured: 0 = The attribute is configured (i.e. the configured value is the operational value). 1 = The attribute is unconfigured (i.e. the operational value is inherited from the a higher level which could be the default value). Getting the attribute value itself always returns the operational value of that attribute regardless of whether the attribute is configured or unconfigured. On write each bit indicates wheter or not the corresponding attribute should be set to the unconfigured state: 0 = No operation (i.e. do not change the state of the attribute). 1 = Set the attribute to the unconfigured state. Setting an attribute to a value has the automatic side-effect of setting the bit with the same name to zero.
usdBgpAddressFamilyTable	1.3.6.1.4.1.4874.2.2.29.1.19		not-accessible	The BGP AddressFamily Entry describes BGP-specific characteristics of one AddressFamily.
usdBgpAddressFamilyEntry	1.3.6.1.4.1.4874.2.2.29.1.19.1		not-accessible	The BGP address family entry
USD usdBgpAddressFamilyVrfName	1.3.6.1.4.1.4874.2.2.29.1.19.1.1	UsdVrfName	not-accessible	The name of the VPN Routing Forwarding (VRF) instance in which this address-family is configured. The empty string indicates that this address-family is not in a VRF.
USD usdBgpAddressFamilyAfi	1.3.6.1.4.1.4874.2.2.29.1.19.1.2	UsdBgpAfi	not-accessible	The AFI of the address-family.
USD usdBgpAddressFamilySafi	1.3.6.1.4.1.4874.2.2.29.1.19.1.3	UsdBgpSafi	not-accessible	The SAFI of the address-family.
T/F usdBgpAddressFamilyDefaultOriginate	1.3.6.1.4.1.4874.2.2.29.1.19.1.4	TruthValue	read-create	Set this object to true(1) in order to advertise a default route, if present.
T/F usdBgpAddressFamilyRouteFlapDampening	1.3.6.1.4.1.4874.2.2.29.1.19.1.5	TruthValue	read-create	Set this object to true(1) in order to enable route flap dampening.
U32 usdBgpAddressFamilyDampeningSuppressThreshold	1.3.6.1.4.1.4874.2.2.29.1.19.1.6	Unsigned32	read-create	The dampening cutoff threshold (scaled).
U32 usdBgpAddressFamilyDampeningReuseThreshold	1.3.6.1.4.1.4874.2.2.29.1.19.1.7	Unsigned32	read-create	The dampening reuse threshold (scaled).
U32 usdBgpAddressFamilyDampeningMaxHoldDownTime	1.3.6.1.4.1.4874.2.2.29.1.19.1.8	Unsigned32	read-create	Maximum route holddown time, in seconds.
U32 usdBgpAddressFamilyDampeningHalfLifeReachable	1.3.6.1.4.1.4874.2.2.29.1.19.1.9	Unsigned32	read-create	Figure of merit half life for reachable routes, in seconds.
U32 usdBgpAddressFamilyDampeningHalfLifeUnreachable	1.3.6.1.4.1.4874.2.2.29.1.19.1.10	Unsigned32	read-create	Figure of merit half life for unreachable routes, in seconds.
STR usdBgpAddressFamilyDampeningRouteMapName	1.3.6.1.4.1.4874.2.2.29.1.19.1.11	DisplayString	read-create	The name of the route-map used to determine which routes are dampened and which aren't and to set the dampening parameters for those routes which are dampenend. A zero length route-map name means don't use a route-map for this.
USD usdBgpAddressFamilyResetConnectionType	1.3.6.1.4.1.4874.2.2.29.1.19.1.12	UsdBgpResetConnectionType	read-create	Writing a value to this object causes one individual address family within the sessions to all peers in this VRF to be cleared; the value determines what type of clear is executed (hard clear, soft clear in, soft clear out, etc.). Note that hard clearing an address family within a session will bounce the session and thus also affect the other address families in the session. Reading this object has no effect and always returns resetTypeNoop.
ROW usdBgpAddressFamilyRowStatus	1.3.6.1.4.1.4874.2.2.29.1.19.1.13	RowStatus	read-create	Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy
INT usdBgpAddressFamilyOperationalState	1.3.6.1.4.1.4874.2.2.29.1.19.1.14	INTEGER	read-only	The BGP address family operational state.
BIT usdBgpAddressFamilyUnconfiguredAttributes	1.3.6.1.4.1.4874.2.2.29.1.19.1.15	Bits	read-create	On get each bit indicates whether the corresponding attribute is configured or unconfigured: 0 = The attribute is configured (i.e. the configured value is the operational value). 1 = The attribute is unconfigured (i.e. the operational value is inherited from the a higher level which could be the default value). Getting the attribute value itself always returns the operational value of that attribute regardless of whether the attribute is configured or unconfigured. On write each bit indicates wheter or not the corresponding attribute should be set to the unconfigured state: 0 = No operation (i.e. do not change the state of the attribute). 1 = Set the attribute to the unconfigured state. Setting an attribute to a value has the automatic side-effect of setting the bit with the same name to zero.
usdBgpStorageGroup	1.3.6.1.4.1.4874.2.2.29.1.20
NUM usdBgpStorageInitialHeapSize	1.3.6.1.4.1.4874.2.2.29.1.20.1	UsdBgpStorageInteger	read-write	The initial size of the BGP heap in octets. The BGP heap is used for a small number of variable sized data structures.
NUM usdBgpStorageMaxHeapSize	1.3.6.1.4.1.4874.2.2.29.1.20.2	UsdBgpStorageInteger	read-write	The maximum size of the BGP heap in octets.
NUM usdBgpStorageInitialVrfPoolSize	1.3.6.1.4.1.4874.2.2.29.1.20.4	UsdBgpStorageInteger	read-write	The initial size of the VRF pool in entries. One entry is allocated from the VRF pool for each VRF used by BGP.
NUM usdBgpStorageMaxVrfPoolSize	1.3.6.1.4.1.4874.2.2.29.1.20.5	UsdBgpStorageInteger	read-write	The maximum size of the VRF pool in entries.
NUM usdBgpStorageInitialAddressFamilyPoolSize	1.3.6.1.4.1.4874.2.2.29.1.20.6	UsdBgpStorageInteger	read-write	The initial size of the address-family pool in entries. One entry is allocated from the address-family pool for each address-family used by BGP.
NUM usdBgpStorageMaxAddressFamilyPoolSize	1.3.6.1.4.1.4874.2.2.29.1.20.7	UsdBgpStorageInteger	read-write	The initial size of the address-family pool in entries.
NUM usdBgpStorageInitialPeerPoolSize	1.3.6.1.4.1.4874.2.2.29.1.20.8	UsdBgpStorageInteger	read-write	The initial size of the peer pool in entries. One entry is allocated from the peer pool for each peer configured in BGP.
NUM usdBgpStorageMaxPeerPoolSize	1.3.6.1.4.1.4874.2.2.29.1.20.9	UsdBgpStorageInteger	read-write	The maximum size of the peer pool in entries.
NUM usdBgpStorageInitialPeerAfPoolSize	1.3.6.1.4.1.4874.2.2.29.1.20.10	UsdBgpStorageInteger	read-write	The initial size of the peer-address-family pool in entries. One entry is allocated from the peer-address-family pool for each address family activated for any peer in BGP (including the IPv4 unicast address families which are usually activated by default for each peer).
NUM usdBgpStorageMaxPeerAfPoolSize	1.3.6.1.4.1.4874.2.2.29.1.20.11	UsdBgpStorageInteger	read-write	The maximum size of the peer-address-family pool in entries.
NUM usdBgpStorageInitialPeerGroupPoolSize	1.3.6.1.4.1.4874.2.2.29.1.20.12	UsdBgpStorageInteger	read-write	The initial size of the peer-group pool in entries. One entry is allocated from the peer-group pool for each peer-group configured in BGP.
NUM usdBgpStorageMaxPeerGroupPoolSize	1.3.6.1.4.1.4874.2.2.29.1.20.13	UsdBgpStorageInteger	read-write	The maximum size of the peer-group pool in entries.
NUM usdBgpStorageInitialPeerGroupAfPoolSize	1.3.6.1.4.1.4874.2.2.29.1.20.14	UsdBgpStorageInteger	read-write	The initial size of the peer-group-address-family pool in entries. One entry is allocated from the peer-group-address-family pool for each address family activated for any peer-group in BGP (including the IPv4 unicast address families which are usually activated by default for each peer-group).
NUM usdBgpStorageMaxPeerGroupAfPoolSize	1.3.6.1.4.1.4874.2.2.29.1.20.15	UsdBgpStorageInteger	read-write	The maximum size of the peer-group-address-family pool in entries.
NUM usdBgpStorageInitialNetworkPoolSize	1.3.6.1.4.1.4874.2.2.29.1.20.16	UsdBgpStorageInteger	read-write	The initial size of the network pool in entries. One entry is allocated from the network pool for each network configured in BGP.
NUM usdBgpStorageMaxNetworkPoolSize	1.3.6.1.4.1.4874.2.2.29.1.20.17	UsdBgpStorageInteger	read-write	The maximum size of the network pool in entries.
NUM usdBgpStorageInitialAggregatePoolSize	1.3.6.1.4.1.4874.2.2.29.1.20.18	UsdBgpStorageInteger	read-write	The initial size of the aggregate pool in entries. One entry is allocated from the aggregate pool for each aggregate configured in BGP.
NUM usdBgpStorageMaxAggregatePoolSize	1.3.6.1.4.1.4874.2.2.29.1.20.19	UsdBgpStorageInteger	read-write	The maximum size of the aggregate pool in entries.
NUM usdBgpStorageInitialDestinationPoolSize	1.3.6.1.4.1.4874.2.2.29.1.20.20	UsdBgpStorageInteger	read-write	The initial size of the destination pool in entries. One entry is allocated from the destination pool for each unique prefix in the BGP RIB.
NUM usdBgpStorageMaxDestinationPoolSize	1.3.6.1.4.1.4874.2.2.29.1.20.21	UsdBgpStorageInteger	read-write	The maximum size of the destination pool in entries.
NUM usdBgpStorageInitialRoutePoolSize	1.3.6.1.4.1.4874.2.2.29.1.20.22	UsdBgpStorageInteger	read-write	The initial size of the route pool in entries. One entry is allocated from the route pool for each received non-VPN route in the BGP RIB.
NUM usdBgpStorageMaxRoutePoolSize	1.3.6.1.4.1.4874.2.2.29.1.20.23	UsdBgpStorageInteger	read-write	The maximum size of the route pool in entries.
NUM usdBgpStorageInitialAttributesPoolSize	1.3.6.1.4.1.4874.2.2.29.1.20.24	UsdBgpStorageInteger	read-write	The initial size of the attributes pool in entries. One entry is allocated from the attributes pool for each unique combination of path attributes of routes in the BGP RIB.
NUM usdBgpStorageMaxAttributesPoolSize	1.3.6.1.4.1.4874.2.2.29.1.20.25	UsdBgpStorageInteger	read-write	The maximum size of the attributes pool in entries.
NUM usdBgpStorageInitialRouteFlapHistoryPoolSize	1.3.6.1.4.1.4874.2.2.29.1.20.26	UsdBgpStorageInteger	read-write	The initial size of the route-flap-history pool in entries. One entry is allocated from the route-flap-history pool for each route in the BGP RIB which has route-flap dampening history associated with it.
NUM usdBgpStorageMaxRouteFlapHistoryPoolSize	1.3.6.1.4.1.4874.2.2.29.1.20.27	UsdBgpStorageInteger	read-write	The maximum size of the route-flap-history pool in entries.
NUM usdBgpStorageInitialNetworkRoutePoolSize	1.3.6.1.4.1.4874.2.2.29.1.20.28	UsdBgpStorageInteger	read-write	The initial size of the network-route pool in entries. One entry is allocated from the network-route pool for each network route in the BGP RIB.
NUM usdBgpStorageMaxNetworkRoutePoolSize	1.3.6.1.4.1.4874.2.2.29.1.20.29	UsdBgpStorageInteger	read-write	The maximum size of the network-route pool in entries.
NUM usdBgpStorageInitialRedistributedRoutePoolSize	1.3.6.1.4.1.4874.2.2.29.1.20.30	UsdBgpStorageInteger	read-write	The initial size of the redistributed-route pool in entries. One entry is allocated from the redistributed-route pool for each redistributed route in the BGP RIB.
NUM usdBgpStorageMaxRedistributedRoutePoolSize	1.3.6.1.4.1.4874.2.2.29.1.20.31	UsdBgpStorageInteger	read-write	The maximum size of the redistributed-route pool in entries.
NUM usdBgpStorageInitialAggregateRoutePoolSize	1.3.6.1.4.1.4874.2.2.29.1.20.32	UsdBgpStorageInteger	read-write	The initial size of the aggregate-route pool in entries. One entry is allocated from the aggregate-route pool for each aggregate route in the BGP RIB.
NUM usdBgpStorageMaxAggregateRoutePoolSize	1.3.6.1.4.1.4874.2.2.29.1.20.33	UsdBgpStorageInteger	read-write	The maximum size of the aggregate-route pool in entries.
NUM usdBgpStorageInitialAutoSummaryRoutePoolSize	1.3.6.1.4.1.4874.2.2.29.1.20.34	UsdBgpStorageInteger	read-write	The initial size of the auto-summary-route pool in entries. One entry is allocated from the auto-summary-route pool for each auto-summary route in the BGP RIB.
NUM usdBgpStorageMaxAutoSummaryRoutePoolSize	1.3.6.1.4.1.4874.2.2.29.1.20.35	UsdBgpStorageInteger	read-write	The maximum size of the auto-summary-route pool in entries.
NUM usdBgpStorageInitialHistoryRoutePoolSize	1.3.6.1.4.1.4874.2.2.29.1.20.36	UsdBgpStorageInteger	read-write	This object is obsolete. Setting it has not effect and reading this object returns an undefined value.
NUM usdBgpStorageMaxHistoryRoutePoolSize	1.3.6.1.4.1.4874.2.2.29.1.20.37	UsdBgpStorageInteger	read-write	This object is obsolete. Setting it has not effect and reading this object returns an undefined value.
NUM usdBgpStorageInitialSendQueueEntryPoolSize	1.3.6.1.4.1.4874.2.2.29.1.20.38	UsdBgpStorageInteger	read-write	The initial size of the send-queue-entry pool in entries. One entry is allocated from the send-queue-entry pool for update messages which is queued for transmission to a peer.
NUM usdBgpStorageMaxSendQueueEntryPoolSize	1.3.6.1.4.1.4874.2.2.29.1.20.39	UsdBgpStorageInteger	read-write	The maximum size of the send-queue-entry pool in entries.
NUM usdBgpStorageInitialVpnRoutePoolSize	1.3.6.1.4.1.4874.2.2.29.1.20.40	UsdBgpStorageInteger	read-write	The initial size of the vpn-route pool in entries. One entry is allocated from the vpn-route pool for each received VPN route in the BGP RIB.
NUM usdBgpStorageMaxVpnRoutePoolSize	1.3.6.1.4.1.4874.2.2.29.1.20.41	UsdBgpStorageInteger	read-write	The maximum size of the vpn-route pool in entries.
NUM usdBgpStorageInitialRouteTargetPoolSize	1.3.6.1.4.1.4874.2.2.29.1.20.42	UsdBgpStorageInteger	read-write	The initial size of the route-target pool in entries. One entry is allocated from the route-target pool for each route-target imported in any VRF used by BGP.
NUM usdBgpStorageMaxRouteTargetPoolSize	1.3.6.1.4.1.4874.2.2.29.1.20.43	UsdBgpStorageInteger	read-write	The maximum size of the route-target pool in entries.
usdBgpRouteExtendedCommunityTable	1.3.6.1.4.1.4874.2.2.29.1.22		not-accessible	The obsolete BGP-4 Path Extended Community Table contained information about communities within destination networks received from all BGP4 peers. This table has been replaced by the usdBgpNewRouteExtendedCommunityTable.
usdBgpRouteExtendedCommunityEntry	1.3.6.1.4.1.4874.2.2.29.1.22.1		not-accessible	Extended Community attribute information within a path to a network.
OCT usdBgpRouteExtendedCommunityNumber	1.3.6.1.4.1.4874.2.2.29.1.22.1.1	OCTET STRING	read-only	The extended community number.
usdBgpNewRouteTable	1.3.6.1.4.1.4874.2.2.29.1.23		not-accessible	The BGP-4 Received Path Attribute Table contains additional information about paths to destination networks received from all BGP4 peers.
usdBgpNewRouteEntry	1.3.6.1.4.1.4874.2.2.29.1.23.1		not-accessible	Additional information about a path to a network.
USD usdBgpNewRouteVrfName	1.3.6.1.4.1.4874.2.2.29.1.23.1.1	UsdVrfName	not-accessible	The name of the VPN Routing Forwarding (VRF) instance in which this route is present. The empty string indicates that this route is not in a VRF.
USD usdBgpNewRouteAfi	1.3.6.1.4.1.4874.2.2.29.1.23.1.2	UsdBgpAfi	not-accessible	The AFI of the address-family in which this route is present.
USD usdBgpNewRouteSafi	1.3.6.1.4.1.4874.2.2.29.1.23.1.3	UsdBgpSafi	not-accessible	The SAFI of the address-family in which this route is present.
IP usdBgpNewRouteIpAddrPrefix	1.3.6.1.4.1.4874.2.2.29.1.23.1.4	IpAddress	not-accessible	The IP address prefix of the route. This object is an IP address containing the prefix with length specified by usdBgpNewRouteIpAddrPrefixLen. Any bits beyond the length specified by usdBgpNewRouteIpAddrPrefixLen are zeroed.
INT usdBgpNewRouteIpAddrPrefixLen	1.3.6.1.4.1.4874.2.2.29.1.23.1.5	INTEGER	not-accessible	Length in bits of the IP address prefix of the route.
OCT usdBgpNewRouteDistinguisher	1.3.6.1.4.1.4874.2.2.29.1.23.1.6	OCTET STRING	not-accessible	The Route Distinguisher (RD) of the route. This object has an undefined value for non-VPN routes.
IP usdBgpNewRoutePeer	1.3.6.1.4.1.4874.2.2.29.1.23.1.7	IpAddress	not-accessible	The IP address of the peer from which the route was received. This object has value 0.0.0.0 is the route was a locally originated route.
INT usdBgpNewRouteRouteType	1.3.6.1.4.1.4874.2.2.29.1.23.1.8	INTEGER	not-accessible	The type of the route.
OCT usdBgpNewRouteOriginalRd	1.3.6.1.4.1.4874.2.2.29.1.23.1.9	OCTET STRING	not-accessible	The original Route Distinguisher (RD) of a VPN route. For VPN routes which are originated in a VRF or which are received from a CE the original RD is equal to the RD of the VRF. For VPN routes which are received from another PE and imported into a VRF, the original RD is the RD which was received from the other PE (the RD of the route itself is changed to the RD for the VRF when the route is imported into the VRF). For non-VPN routes the value of this object is undefined.
IP usdBgpNewRouteOriginatorId	1.3.6.1.4.1.4874.2.2.29.1.23.1.10	IpAddress	read-only	The Originator-ID path attribute of the route if present. The usdBgpNewRouteOriginatorIdPresent object indicates whether the Originator-ID path attribute is present.
T/F usdBgpNewRouteAtomicAggregatePresent	1.3.6.1.4.1.4874.2.2.29.1.23.1.11	TruthValue	read-only	Atomic-Aggregate path attribute is present.
T/F usdBgpNewRouteMedPresent	1.3.6.1.4.1.4874.2.2.29.1.23.1.12	TruthValue	read-only	The Multi-Exit-Discriminator path attribute is present.
T/F usdBgpNewRouteLocalPrefPresent	1.3.6.1.4.1.4874.2.2.29.1.23.1.13	TruthValue	read-only	The Local-Pref path attribute is present.
T/F usdBgpNewRouteAggregatorPresent	1.3.6.1.4.1.4874.2.2.29.1.23.1.14	TruthValue	read-only	The Aggregator path attribute is present.
T/F usdBgpNewRouteCommunitiesPresent	1.3.6.1.4.1.4874.2.2.29.1.23.1.15	TruthValue	read-only	The Communities path attribute is present.
T/F usdBgpNewRouteOriginatorIdPresent	1.3.6.1.4.1.4874.2.2.29.1.23.1.16	TruthValue	read-only	The Originator-ID path attribute is present.
T/F usdBgpNewRouteClusterListPresent	1.3.6.1.4.1.4874.2.2.29.1.23.1.17	TruthValue	read-only	The Cluster-List path attribute is present.
U32 usdBgpNewRouteWeight	1.3.6.1.4.1.4874.2.2.29.1.23.1.18	Unsigned32	read-only	The weight of the route.
INT usdBgpNewRouteOrigin	1.3.6.1.4.1.4874.2.2.29.1.23.1.19	INTEGER	read-only	The value of the Origin path attribute.
OCT usdBgpNewRouteASPathSegment	1.3.6.1.4.1.4874.2.2.29.1.23.1.20	OCTET STRING	read-only	The value of the AS-path path attribute (as encoded in the received update message).
IP usdBgpNewRouteNextHop	1.3.6.1.4.1.4874.2.2.29.1.23.1.21	IpAddress	read-only	The value of the Next-Hop path attribute.
U32 usdBgpNewRouteMultiExitDisc	1.3.6.1.4.1.4874.2.2.29.1.23.1.22	Unsigned32	read-only	The value of the Multi-Exit-Discriminator path attribute if present. The usdBgpNewRouteMedPresent object indicates whether the Multi-Exit-Discriminator path attribute is present.
U32 usdBgpNewRouteLocalPref	1.3.6.1.4.1.4874.2.2.29.1.23.1.23	Unsigned32	read-only	The value of the Local-Pref path attribute if present. The usdBgpNewRouteLocalPrefPresent object indicates whether the Local-Pref path attribute is present.
INT usdBgpNewRouteAtomicAggregate	1.3.6.1.4.1.4874.2.2.29.1.23.1.24	INTEGER	read-only	Whether or not the local system has selected a less specific route without selecting a more specific route.
INT usdBgpNewRouteAggregatorAS	1.3.6.1.4.1.4874.2.2.29.1.23.1.25	INTEGER	read-only	The value of the AS field in the Aggregator path attribute if present. The usdBgpNewRouteAggregatorPresent object indicates whether the Aggregator path attribute is present.
IP usdBgpNewRouteAggregatorAddress	1.3.6.1.4.1.4874.2.2.29.1.23.1.26	IpAddress	read-only	The value of the address field in the Aggregator path attribute if present. The usdBgpNewRouteAggregatorPresent object indicates whether the Aggregator path attribute is present.
T/F usdBgpNewRouteBestInIpRouteTable	1.3.6.1.4.1.4874.2.2.29.1.23.1.27	TruthValue	read-only	When BGP places a routes in the IP route table, that route may not be used for forwarding traffic if there are other routes (e.g. IGP routes or static routes) to that same prefix with a better administrative distance in the IP route table. This object indicates whether or not the BGP route in the IP route table is the best route (and hence is used for forwarding traffic).
OCT usdBgpNewRouteUnknown	1.3.6.1.4.1.4874.2.2.29.1.23.1.28	OCTET STRING	read-only	One or more path attributes not understood by this BGP4 speaker. Size zero (0) indicates the absence of such attribute(s). Octets beyond the maximum size, if any, are not recorded by this object.
T/F usdBgpNewRouteExtendedCommunitiesPresent	1.3.6.1.4.1.4874.2.2.29.1.23.1.29	TruthValue	read-only	Is the Extended-Communities path attribute present?
T/F usdBgpNewRouteValid	1.3.6.1.4.1.4874.2.2.29.1.23.1.30	TruthValue	read-only	Is the route valid? The route is declared invalid if there is something wrong with it which is not serious enough for sending a notification, but it serious enough for not placing it in the IP route table or propagating it to other peers (for example the next-hop of the route is a local address).
INT usdBgpNewRouteSuppressedBy	1.3.6.1.4.1.4874.2.2.29.1.23.1.31	INTEGER	read-only	Indicates whether or not the route is suppressed, and if so why: suppressedByNothing - Route is not suppressed. suppressedByAggregate - Route is suppressed by a summary-only aggregate. suppressedByAutoSummary - Route is suppressed by an auto-summary. suppressedByDampening - Route is suppressed as a result of route-flap dampening.
T/F usdBgpNewRouteNextHopReachable	1.3.6.1.4.1.4874.2.2.29.1.23.1.32	TruthValue	read-only	Is the indirect next-hop of the route reachable (i.e. can the indirect next-hop of the route be resolved to at least one direct next-hop)?
T/F usdBgpNewRouteSynchronizedWithIgp	1.3.6.1.4.1.4874.2.2.29.1.23.1.33	TruthValue	read-only	Is the route is synchronized (i.e. is there is an IGP route to the same prefix in the IP route table)?
T/F usdBgpNewRoutePlaceInIpRouteTable	1.3.6.1.4.1.4874.2.2.29.1.23.1.34	TruthValue	read-only	Has a BGP route for this prefix been placed in the IP route table?
T/F usdBgpNewRouteAdvertiseToExternalPeers	1.3.6.1.4.1.4874.2.2.29.1.23.1.35	TruthValue	read-only	Should this route be advertised to external peers?
T/F usdBgpNewRouteAdvertiseToInternalPeers	1.3.6.1.4.1.4874.2.2.29.1.23.1.36	TruthValue	read-only	Should this route be advertised to internal peers?
U32 usdBgpNewRouteMplsLabel	1.3.6.1.4.1.4874.2.2.29.1.23.1.37	Unsigned32	read-only	The MPLS label for the route.
U32 usdBgpNewRouteNextHopMetric	1.3.6.1.4.1.4874.2.2.29.1.23.1.38	Unsigned32	read-only	The metric of direct next-hop of this BGP route.
usdBgpNewRouteFlapHistoryTable	1.3.6.1.4.1.4874.2.2.29.1.24		not-accessible	The BGP Route Flap History Table contains information about recorded route flap events.
usdBgpNewRouteFlapHistoryEntry	1.3.6.1.4.1.4874.2.2.29.1.24.1		not-accessible	An instance in the list of route flap events.
INT usdBgpNewRouteFlapState	1.3.6.1.4.1.4874.2.2.29.1.24.1.1	INTEGER	read-only	Current state: stateAvailable(1) - indicates path is available stateSuppressedReachable(2) - indicates path is suppressed, destination is reachable stateSuppressedUnreachable(3) - indicates path in suppressed, destination is not reachable
U32 usdBgpNewRouteFlapFigureOfMerit	1.3.6.1.4.1.4874.2.2.29.1.24.1.2	Unsigned32	read-only	Calculated figure-of-merit.
U32 usdBgpNewRouteFlapRemainingTime	1.3.6.1.4.1.4874.2.2.29.1.24.1.3	Unsigned32	read-only	Number of seconds until reuse or removal.
U32 usdBgpNewRouteFlapSuppressThreshold	1.3.6.1.4.1.4874.2.2.29.1.24.1.4	Unsigned32	read-only	Damping cutoff threshold (scaled).
U32 usdBgpNewRouteFlapReuseThreshold	1.3.6.1.4.1.4874.2.2.29.1.24.1.5	Unsigned32	read-only	Damping reuse threshold (scaled).
U32 usdBgpNewRouteFlapMaxHoldDownTime	1.3.6.1.4.1.4874.2.2.29.1.24.1.6	Unsigned32	read-only	Maximum route holddown time (seconds).
U32 usdBgpNewRouteFlapHalfLifeReachable	1.3.6.1.4.1.4874.2.2.29.1.24.1.7	Unsigned32	read-only	Figure of merit half life for reachable routes (seconds).
U32 usdBgpNewRouteFlapHalfLifeUnreachable	1.3.6.1.4.1.4874.2.2.29.1.24.1.8	Unsigned32	read-only	Figure of merit half life for unreachable routes (seconds).
usdBgpNewRouteCommunityTable	1.3.6.1.4.1.4874.2.2.29.1.25		not-accessible	The BGP-4 Path Community Table contains information about communities within destination networks received from all BGP4 peers.
usdBgpNewRouteCommunityEntry	1.3.6.1.4.1.4874.2.2.29.1.25.1		not-accessible	Community attribute information within a path to a network.
U32 usdBgpNewRouteCommunityNumber	1.3.6.1.4.1.4874.2.2.29.1.25.1.1	Unsigned32	read-only	The community number.
usdBgpNewRouteExtendedCommunityTable	1.3.6.1.4.1.4874.2.2.29.1.26		not-accessible	The BGP-4 Path Extended Community Table contains information about communities within destination networks received from all BGP4 peers.
usdBgpNewRouteExtendedCommunityEntry	1.3.6.1.4.1.4874.2.2.29.1.26.1		not-accessible	Extended Community attribute information within a path to a network.
OCT usdBgpNewRouteExtendedCommunityNumber	1.3.6.1.4.1.4874.2.2.29.1.26.1.1	OCTET STRING	read-only	The extended community number.
usdBgpNewRouteClusterIdTable	1.3.6.1.4.1.4874.2.2.29.1.27		not-accessible	The BGP-4 Path ClusterId Table contains information about router reflector cluster IDs.
usdBgpNewRouteClusterIdEntry	1.3.6.1.4.1.4874.2.2.29.1.27.1		not-accessible	ClusterId attribute information within a path to a network.
U32 usdBgpNewRouteClusterId	1.3.6.1.4.1.4874.2.2.29.1.27.1.1	Unsigned32	read-only	The cluster ID.
usdBgpConformance	1.3.6.1.4.1.4874.2.2.29.2
usdBgpCompliances	1.3.6.1.4.1.4874.2.2.29.2.1
usdBgpCompliance	1.3.6.1.4.1.4874.2.2.29.2.1.1			Obsolete compliance statement for entities which implement the Unisphere BGP MIB. This statement became obsolete when the usdBgpDefaultIPv4Unicast object was added to the general cofiguation group.
usdBgpCompliance2	1.3.6.1.4.1.4874.2.2.29.2.1.2			Obsolete compliance statement for entities which implement the Unisphere BGP MIB. This statement became obsolete when the original route destination was added as an index to each of the route configuration tables.
usdBgpCompliance3	1.3.6.1.4.1.4874.2.2.29.2.1.3			Obsolete compliance statement for entities which implement the Unisphere BGP MIB. This statement became obsolete when the peer and peer-group local-as support was added.
usdBgpCompliance4	1.3.6.1.4.1.4874.2.2.29.2.1.4			Obsolete compliance statement for entities which implement the Unisphere BGP MIB. This statement became obsolete when support was added for adding unicast BGP routes into a multicast view.
usdBgpCompliance5	1.3.6.1.4.1.4874.2.2.29.2.1.5			Obsolete compliance statement for entities which implement the Unisphere BGP MIB. This statement became obsolete when the usdBgpRedistributeInternal object was added to the general configuration group and the history pool size objects were obsoleted and the ability to unconfigure BGP attributes from the MIB was added.
usdBgpCompliance6	1.3.6.1.4.1.4874.2.2.29.2.1.6			The compliance statement for entities which implement the Unisphere BGP MIB.
usdBgpConfGroups	1.3.6.1.4.1.4874.2.2.29.2.2
usdBgpGeneralConfGroup	1.3.6.1.4.1.4874.2.2.29.2.2.1			Obsolete collection of objects providing general management of BGP in a Unisphere product. This group became obsolete when the usdBgpDefaultIPv4Unicast object was added.
usdBgpStatisticsConfGroup	1.3.6.1.4.1.4874.2.2.29.2.2.2			A collection of objects providing statistics of BGP operations in a Unisphere product.
usdBgpConfederationPeerConfGroup	1.3.6.1.4.1.4874.2.2.29.2.2.3			An object providing management of BGP-specific confederation peers in a Unisphere product.
usdBgpPeerConfGroup	1.3.6.1.4.1.4874.2.2.29.2.2.4			Obsolete collection of objects providing management of BGP peers in a Unisphere product. This group became obsolete when the usdBgpPeerLocalAsNumber object was added.
usdBgpAfiSafiPeerConfGroup	1.3.6.1.4.1.4874.2.2.29.2.2.5			A collection of objects providing management of BGP-specific AFI and SAFI peers in a Unisphere product.
usdBgpPeerAddressFamilyConfGroup	1.3.6.1.4.1.4874.2.2.29.2.2.6			Obsolete collection of objects providing management of BGP peer address families in a Unisphere product. This group became obsolete when the ability to unconfigure attributes using the MIB was added.
usdBgpPeerGroupConfGroup	1.3.6.1.4.1.4874.2.2.29.2.2.7			Obsolete collection of objects providing management of BGP peer groups in a Unisphere product. This group became obsolete when the usdBgpPeerGroupLocalAsNumber object was added.
usdBgpPeerGroupAddressFamilyConfGroup	1.3.6.1.4.1.4874.2.2.29.2.2.8			Obsolete collection of objects providing management of BGP peer group address families in a Unisphere product. This group was obsoleted when the ability to unconfigure BGP attributes using the MIB was added.
usdBgpRouteConfGroup	1.3.6.1.4.1.4874.2.2.29.2.2.9			Obsolete collection of objects providing management of BGP routes in a Unisphere product. This group became obsolete when the original route destination was added as an index to each of the tables.
usdBgpNetworkConfGroup	1.3.6.1.4.1.4874.2.2.29.2.2.10			Obsolete collection of objects providing management of BGP networks in a Unisphere product. This group was obsoleted when the ability to unconfigure BGP attributes using the MIB was added.
usdBgpAggregateConfGroup	1.3.6.1.4.1.4874.2.2.29.2.2.11			Obsolete collection of objects providing consolidation of BGP route information in a Unisphere product. This group was obsoleted when the ability to unconfigure BGP attributes using the MIB was added.
usdBgpVrfConfGroup	1.3.6.1.4.1.4874.2.2.29.2.2.12			Obsolete collection of objects providing management of BGP-specific VPN routing forwarding (VRF) characteristics in a Unisphere product. This group became obsolete when the usdBgpVrfAddUnicastRoutesToMulticastView object was added.
usdBgpAddressFamilyConfGroup	1.3.6.1.4.1.4874.2.2.29.2.2.13			Obsolete collection of objects providing management of BGP address families in a Unisphere product. This group was obsoleted when the ability to unconfigure BGP attributes using the MIB was added.
usdBgpStorageConfGroup	1.3.6.1.4.1.4874.2.2.29.2.2.14			Obsolete collection of objects providing management of BGP characteristics in a Unisphere product that will not take affect until reboot. This group became obsolete when the history pool size objects were obsoleted.
usdBgpGeneralConfGroup2	1.3.6.1.4.1.4874.2.2.29.2.2.15			Obsolete collection of objects providing general management of BGP in a Unisphere product. This group became obsolete when the usdBgpRedistributeInternal object and unconfigure support were added.
usdBgpNewRouteConfGroup	1.3.6.1.4.1.4874.2.2.29.2.2.16			A collection of objects providing management of BGP routes in a Unisphere product.
usdBgpPeerConfGroup2	1.3.6.1.4.1.4874.2.2.29.2.2.17			Obsolete collection of objects providing management of BGP peers in a Unisphere product. This group became obsolete when the ability to unconfigure BGP attributes from the MIB was added.
usdBgpPeerGroupConfGroup2	1.3.6.1.4.1.4874.2.2.29.2.2.18			Obsolete collection of objects providing management of BGP peer groups in a Unisphere product. This group was obsoleted when the ability to unconfigure BGP attributes using the MIB was added.
usdBgpVrfConfGroup2	1.3.6.1.4.1.4874.2.2.29.2.2.19			Obsolete collection of objects providing management of BGP-specific VPN routing forwarding (VRF) characteristics in a Unisphere product. This group was obsoleted when the ability to unconfigure BGP attributes using the MIB was added.
usdBgpGeneralConfGroup3	1.3.6.1.4.1.4874.2.2.29.2.2.20			A collection of objects providing general management of BGP in a Unisphere product.
usdBgpStorageConfGroup2	1.3.6.1.4.1.4874.2.2.29.2.2.21			A collection of objects providing management of BGP characteristics in a Unisphere product that will not take affect until reboot.
usdBgpPeerConfGroup3	1.3.6.1.4.1.4874.2.2.29.2.2.22			A collection of objects providing management of BGP peers in a Unisphere product.
usdBgpPeerAddressFamilyConfGroup2	1.3.6.1.4.1.4874.2.2.29.2.2.23			A collection of objects providing management of BGP peer address families in a Unisphere product.
usdBgpPeerGroupConfGroup3	1.3.6.1.4.1.4874.2.2.29.2.2.24			A collection of objects providing management of BGP peer groups in a Unisphere product.
usdBgpPeerGroupAddressFamilyConfGroup2	1.3.6.1.4.1.4874.2.2.29.2.2.25			A collection of objects providing management of BGP peer group address families in a Unisphere product.
usdBgpNetworkConfGroup2	1.3.6.1.4.1.4874.2.2.29.2.2.26			A collection of objects providing management of BGP networks in a Unisphere product.
usdBgpAggregateConfGroup2	1.3.6.1.4.1.4874.2.2.29.2.2.27			A collection of objects providing consolidation of BGP route information in a Unisphere product.
usdBgpVrfConfGroup3	1.3.6.1.4.1.4874.2.2.29.2.2.28			A collection of objects providing management of BGP-specific VPN routing forwarding (VRF) characteristics in a Unisphere product.
usdBgpAddressFamilyConfGroup2	1.3.6.1.4.1.4874.2.2.29.2.2.29			A collection of objects providing management of BGP address families in a Unisphere product.

RFC description

Juniper Networks (formerly Unisphere) enterprise MIB for BGP protocol management and monitoring on routing platforms.

Start monitoring Juniper/Unisphere ERX edge routing switch (BGP local-AS/route-reflection/route-table statistics status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Unisphere-Data-BGP-MIB