JUNIPER-LSYSSP-NATDSTPOOL-MIB

All MIBs › JUNIPER-LSYSSP-NATDSTPOOL-MIB

Organization: Juniper Networks, Inc.

Last Updated: 2010-05-19

Category: Vendor: Juniper

Description: Provides managed objects for NAT destination pool resource limits per logical system security profile on Juniper Networks SRX devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is JUNIPER-LSYSSP-NATDSTPOOL-MIB?

JUNIPER-LSYSSP-NATDSTPOOL-MIB is a Juniper Networks enterprise MIB defining NAT-destination-pool-specific managed objects for Logical System (LSYS) security profiles on Juniper enterprise security platforms. It is part of a family of Logical-System Security Profile (LSYSSP) MIBs that let a device track resource consumption and quota limits for various security features on a per-logical-system basis, in this case specifically for NAT destination pool resources. Its monitoring value is primarily software/configuration resource-quota status: current usage versus configured limits for NAT destination pools assigned to a logical system, which helps detect resource exhaustion before it causes NAT failures. It is explicitly tied to the broader concept of Juniper Logical-System security profiles and would be used alongside sibling LSYSSP MIBs (such as the NAT source-rule MIB) for full logical-system resource visibility, as noted in its own module description referencing Juniper LSYS documentation. It is deployed on multi-tenant or logical-system-partitioned Juniper SRX security platforms where NAT resources must be capped per logical system. Network engineers evaluating or troubleshooting this functionality can download the JUNIPER-LSYSSP-NATDSTPOOL-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in JUNIPER-LSYSSP-NATDSTPOOL-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Juniper SRX security appliances (multi-tenant/logical-system deployments)

Monitoring Examples

No sample object names were provided for this module, so specific table or column names cannot be confirmed from source; the module description only states that it covers NAT-destination-pool resource limits within LSYS security profiles. A realistic use would be polling per-logical-system NAT destination pool usage against configured quota limits to catch a logical system approaching its resource cap, but naming exact objects here would be speculative given the lack of grounding data.

Imported Objects

From JUNIPER-LSYS-SECURITYPROFILE-MIB

jnxLsysSpNATdstpool

OBJECT-IDENTITY

From SNMPv2-SMI

MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
jnxLsysSpNATdstpoolMIB	1.3.6.1.4.1.2636.3.39.1.17.9.1			This module defines the NAT-destination-pool-specific MIB for Juniper Enterprise Logical-System (LSYS) security profiles. Juniper documentation is recommended as the reference. The LSYS security profile provides various static and dynamic resource management by observing resource quota limits. Security NAT-destination-pool resource is the focus in this MIB.
jnxLsysSpNATdstpoolObjects	1.3.6.1.4.1.2636.3.39.1.17.9.1.1
jnxLsysSpNATdstpoolTable	1.3.6.1.4.1.2636.3.39.1.17.9.1.1.1		not-accessible	LSYSPROFILE NAT-destination-pool objects for NAT-destination-pool resource consumption per LSYS.
jnxLsysSpNATdstpoolEntry	1.3.6.1.4.1.2636.3.39.1.17.9.1.1.1.1		not-accessible	An entry in NAT-destination-pool resource table.
STR jnxLsysSpNATdstpoolLsysName	1.3.6.1.4.1.2636.3.39.1.17.9.1.1.1.1.1	DisplayString	not-accessible	The name of the logical system for which NAT-destination-pool resource information is retrieved.
STR jnxLsysSpNATdstpoolProfileName	1.3.6.1.4.1.2636.3.39.1.17.9.1.1.1.1.2	DisplayString	read-only	The security profile name string for the LSYS.
U32 jnxLsysSpNATdstpoolUsage	1.3.6.1.4.1.2636.3.39.1.17.9.1.1.1.1.3	Unsigned32	read-only	The current resource usage count for the LSYS.
U32 jnxLsysSpNATdstpoolReserved	1.3.6.1.4.1.2636.3.39.1.17.9.1.1.1.1.4	Unsigned32	read-only	The reserved resource count for the LSYS.
U32 jnxLsysSpNATdstpoolMaximum	1.3.6.1.4.1.2636.3.39.1.17.9.1.1.1.1.5	Unsigned32	read-only	The maximum allowed resource usage count for the LSYS.
jnxLsysSpNATdstpoolSummary	1.3.6.1.4.1.2636.3.39.1.17.9.1.2
U32 jnxLsysSpNATdstpoolUsedAmount	1.3.6.1.4.1.2636.3.39.1.17.9.1.2.1	Unsigned32	read-only	The NAT-destination-pool resource consumption over all LSYS.
U32 jnxLsysSpNATdstpoolMaxQuota	1.3.6.1.4.1.2636.3.39.1.17.9.1.2.2	Unsigned32	read-only	The NAT-destination-pool resource maximum quota for the whole device for all LSYS.
U32 jnxLsysSpNATdstpoolAvailableAmount	1.3.6.1.4.1.2636.3.39.1.17.9.1.2.3	Unsigned32	read-only	The NAT-destination-pool resource available in the whole device.
U32 jnxLsysSpNATdstpoolHeaviestUsage	1.3.6.1.4.1.2636.3.39.1.17.9.1.2.4	Unsigned32	read-only	The most amount of NAT-destination-pool resource consumed of a LSYS.
STR jnxLsysSpNATdstpoolHeaviestUser	1.3.6.1.4.1.2636.3.39.1.17.9.1.2.5	DisplayString	read-only	The LSYS name that consume the most NAT-destination-pool resource.
U32 jnxLsysSpNATdstpoolLightestUsage	1.3.6.1.4.1.2636.3.39.1.17.9.1.2.6	Unsigned32	read-only	The least amount of NAT-destination-pool resource consumed of a LSYS.
STR jnxLsysSpNATdstpoolLightestUser	1.3.6.1.4.1.2636.3.39.1.17.9.1.2.7	DisplayString	read-only	The LSYS name that consume the least NAT-destination-pool resource.

RFC description

Manages NAT destination pool resource consumption and quota limits for Juniper logical system security profiles.

Start monitoring Juniper SRX security appliance (logical-system NAT destination-pool quota) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download JUNIPER-LSYSSP-NATDSTPOOL-MIB

What Is JUNIPER-LSYSSP-NATDSTPOOL-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description