Juniper-PPPoE-CONF

All MIBs › Juniper-PPPoE-CONF

Organization: Juniper Networks, Inc.

Last Updated: 2008-11-27

Category: Protocol: PPP, Vendor: Juniper

Description: Juniper Networks conformance statements for PPPoE (PPP over Ethernet) management on Juniper E-series edge routers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Juniper-PPPoE-CONF?

Juniper-PPPoE-CONF is a Juniper Networks, Inc. AGENT-CAPABILITIES MIB declaring the JUNOSe family's SNMP agent conformance for the PPPoE (Point-to-Point Protocol over Ethernet) component. It carries no data objects of its own — as a conformance-declaration module it registers which groups of the PPPoE MIB a given JUNOSe software release implements. As a software-status MIB it lets an administrator confirm which PPPoE capability groups apply to their specific JUNOSe release. It is deployed on Juniper Networks JUNOSe family edge routers. Engineers can download the Juniper-PPPoE-CONF file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Juniper-PPPoE-CONF. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Juniper Networks JUNOSe family edge routers

Monitoring Examples

An administrator checks this capability module's PRODUCT-RELEASE clause to confirm which PPPoE MIB groups a given JUNOSe software release implements.

Imported Objects

From Juniper-Agents

juniAgents

MODULE-IDENTITY

From SNMPv2-CONF

AGENT-CAPABILITIES

From SNMPv2-SMI

MODULE-IDENTITY

OIDs

OID symbolic	OID numeric	Description
juniPppoeAgent	1.3.6.1.4.1.4874.5.2.33	The agent capabilities definitions for the point-to-point protocol over Ethernet (PPPoE) component of the SNMP agent in JUNOSe family of products.
juniPppoeAgentV1	1.3.6.1.4.1.4874.5.2.33.1	The MIB supported by the SNMP agent for the PPPoE application in JUNOSe. These capabilities became obsolete when AC-NAME and duplicate MAC address indicator objects were added.
juniPppoeAgentV2	1.3.6.1.4.1.4874.5.2.33.2	The MIB supported by the SNMP agent for the PPPoE application in JUNOSe. These capabilities became obsolete when PADI flag support was added.
juniPppoeAgentV3	1.3.6.1.4.1.4874.5.2.33.3	The MIB supported by the SNMP agent for the PPPoE application in the JUNOSe. These capabilities became obsolete when PADN counter support was added.
juniPppoeAgentV4	1.3.6.1.4.1.4874.5.2.33.4	The MIB supported by the SNMP agent for the PPPoE application in JUNOSe. These capabilities became obsolete when the invalid session counter was replaced by separate PADI and PADR invalid session counters, invalid length and invalid tag length counters and service name table support were added.
juniPppoeAgentV5	1.3.6.1.4.1.4874.5.2.33.5	The MIB supported by the SNMP agent for the PPPoE application in JUNOSe. These capabilities became obsolete when PADR remote-circuit-id field was added.
juniPppoeAgentV6	1.3.6.1.4.1.4874.5.2.33.6	The MIB supported by the SNMP agent for the PPPoE application in JUNOSe. These capabilities became obsolete when MTU configuration was added.
juniPppoeAgentV7	1.3.6.1.4.1.4874.5.2.33.7	The MIB supported by the SNMP agent for the PPPoE application in JUNOSe. These capabilities became obsolete when lockout configuration was added.
juniPppoeAgentV8	1.3.6.1.4.1.4874.5.2.33.8	The MIB supported by the SNMP agent for the PPPoE application in JUNOSe. These capabilities became obsolete when unknownAction option was added to PPPoE service name table.
juniPppoeAgentV9	1.3.6.1.4.1.4874.5.2.33.9	The MIB supported by the SNMP agent for the PPPoE application in JUNOSe.

RFC description

Agent capabilities for Point-to-Point Protocol over Ethernet (PPPoE) in Juniper JUNOSe products.

Start monitoring Juniper Networks JUNOSe family edge router (agent capabilities, PPPoE) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Juniper-PPPoE-CONF

What Is Juniper-PPPoE-CONF?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description