All MIBs › Juniper-ISIS-MIB
Organization: Juniper Networks, Inc.
Last Updated: 2006-03-13
Category: Routing Protocols, Technology: Routing, Vendor: Juniper
Description: Provides managed objects for IS-IS (Intermediate System to Intermediate System) routing protocol adjacencies and statistics on Juniper E-series routers.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is Juniper-ISIS-MIB?
Juniper-ISIS-MIB is a Juniper Networks enterprise MIB providing managed objects for the Intermediate System to Intermediate System (IS-IS) routing protocol on Juniper E-series routers, as used per ISO 10589 and RFC 1195 for IP routing table construction. It exposes IS-IS instance/system configuration such as system type and ID, area address limits, path split limits, and LSP (link-state PDU) generation timers, alongside trap notifications. It is used to monitor the software-level operational status of the IS-IS protocol instance: whether it is configured as Level 1, Level 2, or both, how frequently LSPs regenerate, and whether area or adjacency misconfiguration is signaled via traps. It parallels the standard ISIS-MIB concepts (as later formalized in RFC 4444) but is implemented as a Juniper-specific enterprise MIB. It is deployed on E-series routers running IS-IS as an interior gateway protocol in service-provider or enterprise backbone networks. Engineers can download the Juniper-ISIS-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in Juniper-ISIS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Juniper E-series routers
Monitoring Examples
Rows of juniIsisSysTable/juniIsisSysEntry expose juniIsisSysType (L1/L2/L1L2) and juniIsisSysID for identifying the routing instance, alongside timer objects like juniIsisSysMinL1LSPGenInt and juniIsisSysMinL2LSPGenInt that an admin checks when tuning LSP flooding behavior. juniIsisSysMaxAreaAddresses and notifications under juniIsisTrapGroup help detect area or adjacency misconfiguration on the router.
What Can Be Monitored
- IS-IS system type/level
- system ID
- LSP generation intervals
- max area addresses
- max path splits
- IS-IS traps/notifications
This MIB depends on
Related MIBs
Imported Objects
From IF-MIB
| InterfaceIndexOrZero |
From Juniper-MIBs
| juniMibs | MODULE-IDENTITY |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Gauge32 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DisplayString | |
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TruthValue |
How to Use in IPNetwork Monitor
Example using juniIsisSysCorrLSPs OID:
Select a Juniper E-series router (IS-IS routing protocol) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type juniIsisSysCorrLSPs into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the number of corrupted LSPs detected. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| juniIsisMIB | 1.3.6.1.4.1.4874.2.2.38 | The intermediate system to intermediate system (IS-IS) routing protocol MIB for Juniper Networks E-series products. This MIB provides objects for management of the IS-IS Routing protocol, as described in ISO 10589, when it is used to construct routing tables for IP networks, as described in RFC 1195. | ||
| juniIsisObjects | 1.3.6.1.4.1.4874.2.2.38.1 | |||
| juniIsisSystemGroup | 1.3.6.1.4.1.4874.2.2.38.1.1 | |||
| juniIsisSysTable | 1.3.6.1.4.1.4874.2.2.38.1.1.1 | not-accessible | The set of instances of the Integrated IS-IS protocol existing on the system. | |
| juniIsisSysEntry | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1 | not-accessible | Each row defines information specific to a single instance of the protocol existing on the system. | |
| I32 juniIsisSysInstance | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.1 | Integer32 | not-accessible | The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. |
| STR juniIsisSysVersion | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.2 | DisplayString | read-only | The version number of the IS-IS protocol to which this instance conforms. This value must be set by the implementation when the row is valid. |
| INT juniIsisSysType | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.3 | INTEGER | read-write | The type of this instance of the Integrated IS-IS protocol. This object follows the replaceOnlyWhileDisabled behaviour. |
| SYS juniIsisSysID | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.4 | SystemID | read-write | The ID for this instance of the Integrated IS-IS protocol. This value is appended to each of the instance's area addresses to form the Network Entity Titles valid for this instance. The derivation of a value for this object is implementation-specific. Some implementations may assign values and not permit write MAX-ACCESS, others may require the value to be set manually. |
| I32 juniIsisSysMaxPathSplits | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.5 | Integer32 | read-write | Maximum number of paths with equal routing metric value which it is permitted to split between. This object follows the replaceOnlyWhileDisabled behaviour. |
| I32 juniIsisSysMaxLSPGenInt | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.6 | Integer32 | read-write | Maximum interval, in seconds, between generated LSPs by this instance. This object follows the resettingTimer behaviour. |
| LSP juniIsisSysOrigLSPBuffSize | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.7 | LSPBuffSize | read-write | The maximum size of LSPs and SNPs originated by this instance. This object follows the replaceOnlyWhileDisabled behaviour. |
| I32 juniIsisSysMaxAreaAddresses | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.8 | Integer32 | read-only | The maximum number of area addresses to be permitted for the area in which this instance exists. Note that all Intermediate Systems in the same area must have the same value configured for this attribute if correct operation is to be assumed. This object follows the replaceOnlyWhileDisabled behaviour. |
| I32 juniIsisSysMinL1LSPGenInt | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.9 | Integer32 | read-write | Minimum interval, in seconds, between successive generation of L1 LSPs with the same LSPID by this instance. This object follows the resettingTimer behaviour. |
| I32 juniIsisSysMinL2LSPGenInt | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.10 | Integer32 | read-write | Minimum interval, in seconds, between successive generation of L2 LSPs with the same LSPID by this instance. This object follows the resettingTimer behaviour. |
| I32 juniIsisSysPollESHelloRate | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.11 | Integer32 | read-only | The value, in seconds, to be used for the suggested ES configuration timer in ISH PDUs when soliciting the ES configuration. |
| I32 juniIsisSysWaitTime | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.12 | Integer32 | read-only | Number of seconds to delay in waiting state before entering on state. This object follows the resettingTimer behaviour. |
| OPE juniIsisSysOperState | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.13 | OperState | read-write | The operational state of this instance of the Integrated IS-IS protocol. Setting this object to the value on when its current value is off enables operation of this instance of the Integrated IS-IS protocol. |
| LEV juniIsisSysL1State | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.14 | LevelState | read-only | The state of the Level 1 database. |
| C32 juniIsisSysCorrLSPsEx | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.15 | Counter32 | read-only | Number of corrupted LSPs detected. |
| C32 juniIsisSysLSPL1DbaseOloads | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.16 | Counter32 | read-only | Number of times the LSP L1 database has become overloaded. |
| C32 juniIsisSysManAddrDropFromAreas | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.17 | Counter32 | read-only | Number of times a manual address has been dropped from the area. |
| C32 juniIsisSysAttmptToExMaxSeqNums | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.18 | Counter32 | read-only | Number of times the IS has attempted to exceed the maximum sequence number. |
| C32 juniIsisSysSeqNumSkips | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.19 | Counter32 | read-only | Number of times a sequence number skip has occurred. |
| C32 juniIsisSysOwnLSPPurges | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.20 | Counter32 | read-only | Number of times a zero-aged copy of the system's own LSP is received from some other node. |
| C32 juniIsisSysIDFieldLenMismatches | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.21 | Counter32 | read-only | Number of times a PDU is received with a different value for ID field length to that of the receiving system. |
| C32 juniIsisSysMaxAreaAddrMismatches | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.22 | Counter32 | read-only | Number of times a PDU is received with a different value for MaximumAreaAddresses from that of the receiving system. |
| LSP juniIsisSysOrigL2LSPBuffSize | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.23 | LSPBuffSize | read-write | The maximum size of Level 2 LSPs and SNPs originated by this system. This object follows the replaceOnlyWhileDisabled behaviour. |
| LEV juniIsisSysL2State | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.24 | LevelState | read-only | The state of the Level 2 database. |
| C32 juniIsisSysLSPL2DbaseOloads | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.25 | Counter32 | read-only | Number of times the Level 2 LSP database has become overloaded. |
| C32 juniIsisSysAuthFails | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.26 | Counter32 | read-only | The number of authentication failures recognized by this instance of the protocol. |
| T/F juniIsisSysLSPIgnoreErrors | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.27 | TruthValue | read-write | If true, allow the router to ignore IS-IS link state packets (LSPs) that are received with internal checksum errors rather than purging the LSPs. |
| T/F juniIsisSysMaxAreaCheck | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.28 | TruthValue | read-only | When on, enables checking of maximum area addresses per IS version of ISO10589. |
| T/F juniIsisSysSetOverloadBit | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.29 | TruthValue | read-write | Isis overload bit |
| I32 juniIsisSysSetOverloadBitStartupDuration | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.30 | Integer32 | read-write | Specifies the length in time of seconds to set the overload bit from startup. This object must be set together with juniIsisSysSetOverloadBit, otherwise the agent will return zero. Zero value for this object implies that the overload bit is not set. Zero value does not have any meaning for this object. |
| I32 juniIsisSysMaxLspLifetime | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.31 | Integer32 | read-write | Specifies the maximum time (in seconds) a LSP will remain in the box without being refreshed before being considered invalid. |
| I32 juniIsisSysL1SpfInterval | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.32 | Integer32 | read-write | Minimum interval, in seconds, between level 1 SPF calculations. |
| I32 juniIsisSysL2SpfInterval | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.33 | Integer32 | read-write | Minimum interval, in seconds, between level 2 SPF calculations. |
| I32 juniIsisSysIshHoldTime | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.34 | Integer32 | read-write | Specify a holdtime advertised in ESH/ISH PDUs. |
| I32 juniIsisSysIshConfigTimer | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.35 | Integer32 | read-write | Specify the rate of transmission for ESH and ISH packets. |
| T/F juniIsisSysDistributeDomainWide | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.36 | TruthValue | read-write | When on, enables distribution of prefixes throughout a multi-level domain. |
| I32 juniIsisSysDistance | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.37 | Integer32 | read-write | The weight applied to IS-IS routes. |
| INT juniIsisSysL1MetricStyle | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.38 | INTEGER | read-write | Specifies the type of IP reachability TLV to advertise in level 1 LSPs. |
| INT juniIsisSysL2MetricStyle | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.39 | INTEGER | read-write | Specifies the type of IP reachability TLV to advertise in level 2 LSPs. |
| OCT juniIsisSysIsoRouteTag | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.40 | OCTET STRING | read-write | The ISO routing area tag. |
| INT juniIsisSysMplsTeLevel | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.41 | INTEGER | read-write | Select flooding of MPLS traffic engineering link information into the specified ISIS level. |
| NUM juniIsisSysMplsTeRtrIdIfIndex | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.42 | InterfaceIndexOrZero | read-write | Configure the stable router interface ID to designate it as TE capable. A value of zero is used to remove any configured router interface ID. |
| T/F juniIsisSysMplsTeSpfUseAnyBestPath | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.43 | TruthValue | read-write | Configure whether or not to consider spf paths when alternate tunnel path exists |
| G32 juniIsisSysReferenceBandwidth | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.44 | Gauge32 | read-write | Configure the reference bandwitdth used to calculate the link cost in bits per second.If the reference bandwidth is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295) and juniIsisSysHighReferenceBandwidth must be used to report the reference bandwidth. |
| G32 juniIsisSysHighReferenceBandwidth | 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.45 | Gauge32 | read-write | Configure the reference bandwitdth in mega bits per second. It is used to calculate the link cost. |
| juniIsisManAreaAddrTable | 1.3.6.1.4.1.4874.2.2.38.1.1.2 | not-accessible | The set of manual area addresses configured on this Intermediate System. | |
| juniIsisManAreaAddrEntry | 1.3.6.1.4.1.4874.2.2.38.1.1.2.1 | not-accessible | Each entry contains one area address manually configured on this system. | |
| I32 juniIsisManAreaAddrSysInstance | 1.3.6.1.4.1.4874.2.2.38.1.1.2.1.1 | Integer32 | not-accessible | The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. |
| ADR juniIsisManAreaAddr | 1.3.6.1.4.1.4874.2.2.38.1.1.2.1.2 | OSINSAddress | not-accessible | A manually configured area address for this system. This object follows the index behaviour. Note: an index for the entry {1, {49.0001} active} in this table would be the ordered pair (1, (0x03 0x49 0x00 0x01)), as the length of an octet string is part of the OID. |
| ROW juniIsisManAreaAddrRowStatus | 1.3.6.1.4.1.4874.2.2.38.1.1.2.1.3 | RowStatus | read-create | The state of the juniIsisManAreaAddrEntry. This object follows the RowStatus behaviour. If an attempt is made to set this object to the value off when the corresponding juniIsisManAreaAddrEntry is the only valid entry for this instance and when the corresponding IS-IS instance has juniIsisSysOperState set to on then the attempt is rejected. |
| juniIsisSysProtSuppTable | 1.3.6.1.4.1.4874.2.2.38.1.1.3 | not-accessible | This table contains the manually configured set of protocols supported by each instance of the Integrated ISIS protocol. | |
| juniIsisSysProtSuppEntry | 1.3.6.1.4.1.4874.2.2.38.1.1.3.1 | not-accessible | Each entry contains one protocol supported by an instance of the Integrated ISIS protocol. | |
| I32 juniIsisSysProtSuppSysInstance | 1.3.6.1.4.1.4874.2.2.38.1.1.3.1.1 | Integer32 | not-accessible | The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. |
| SUP juniIsisSysProtSuppProtocol | 1.3.6.1.4.1.4874.2.2.38.1.1.3.1.2 | SupportedProtocol | not-accessible | One supported protocol. This object follows the index behaviour. |
| ROW juniIsisSysProtSuppRowStatus | 1.3.6.1.4.1.4874.2.2.38.1.1.3.1.3 | RowStatus | read-only | The state of the juniIsisSysProtSuppEntry. This object follows the RowStatus behavior. |
| juniIsisSummAddrTable | 1.3.6.1.4.1.4874.2.2.38.1.1.4 | not-accessible | The set of IP summary addresses to use in forming the contents of Level 2 LSPs originated by this level 2 Intermediate System. | |
| juniIsisSummAddrEntry | 1.3.6.1.4.1.4874.2.2.38.1.1.4.1 | not-accessible | Each entry contains one IP summary address. | |
| I32 juniIsisSummAddrSysInstance | 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.1 | Integer32 | not-accessible | The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviours. |
| IP juniIsisSummAddress | 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.2 | IpAddress | not-accessible | The IP Address value for this summary address. This object follows the index behaviour. |
| IP juniIsisSummAddrMask | 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.3 | IpAddress | not-accessible | The mask value for this summary address. This object follows the index behaviour. |
| ROW juniIsisSummAddrRowStatus | 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.4 | RowStatus | read-create | The existence state of this summary address. This object follows the RowStatus behaviour. |
| OPE juniIsisSummAddrOperState | 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.5 | OperState | read-create | The operational state of this entry. This object follows the operationalState behaviour. When the operational state changes if this would cause the contents of LSPs originated by the system to change then those new LSPs must be generated and sent as soon as is permitted by the ISIS protocol. |
| I32 juniIsisSummAddrDefaultMetric | 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.6 | Integer32 | read-create | The default metric value to announce this summary address with in Level 1 or 2 LSPs generated by this system. A Metric value of 0 indicates to use the lowest metric value amongst the routes being summarized. When advertising a metric value into a narrow domain (juniIsisSysL1MetricStyle or juniIsisSysL2MetricStyle is set to juniIsisMetricStyleNarrow) the value will be truncated to 63. |
| OTH juniIsisSummAddrDelayMetric | 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.7 | OtherMetric | read-only | The delay metric value to announce this summary address with in Level 2 LSPs generated by this system. The value of zero is reserved to indicate that this metric is not supported. |
| OTH juniIsisSummAddrExpenseMetric | 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.8 | OtherMetric | read-only | The expense metric value to announce this summary address with in Level 2 LSPs generated by this system. The value of zero is reserved to indicate that this metric is not supported. |
| OTH juniIsisSummAddrErrorMetric | 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.9 | OtherMetric | read-only | The error metric value to announce this summary address with in Level n LSPs generated by this system. The value of zero is reserved to indicate that this metric is not supported. |
| INT juniIsisSummLevel | 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.10 | INTEGER | read-create | The level of database at which to annouce this summary. |
| juniIsisSysHostNameTable | 1.3.6.1.4.1.4874.2.2.38.1.1.5 | not-accessible | This table contains the manually configured set of host name to system ID aliases supported by each instance of the Integrated ISIS protocol. | |
| juniIsisSysHostNameEntry | 1.3.6.1.4.1.4874.2.2.38.1.1.5.1 | not-accessible | Each entry contains one name to system ID alias supported by an instance of the Integrated ISIS protocol. | |
| I32 juniIsisSysHostNameSysInstance | 1.3.6.1.4.1.4874.2.2.38.1.1.5.1.1 | Integer32 | not-accessible | The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. |
| SYS juniIsisSysHostNameSysId | 1.3.6.1.4.1.4874.2.2.38.1.1.5.1.2 | SystemID | not-accessible | The ID for the system which this name will be assigned. |
| ADR juniIsisSysHostNameAreaAddr | 1.3.6.1.4.1.4874.2.2.38.1.1.5.1.3 | OSINSAddress | read-create | A configured area address for the system which this name will be assigned. This object follows the index behaviour. Note: an index for the entry {1, {49.0001} active} in this table would be the ordered pair (1, (0x03 0x49 0x00 0x01)), as the length of an Octet string is part of the OID. |
| OCT juniIsisSysHostNameName | 1.3.6.1.4.1.4874.2.2.38.1.1.5.1.4 | OCTET STRING | read-write | A string to use when displaying system data with this system ID. |
| INT juniIsisSysHostNameType | 1.3.6.1.4.1.4874.2.2.38.1.1.5.1.5 | INTEGER | read-only | The type of host name entry. |
| ROW juniIsisSysHostNameRowStatus | 1.3.6.1.4.1.4874.2.2.38.1.1.5.1.6 | RowStatus | read-write | The status of this host name entry. This object follows the RowStatus behaviour. |
| juniIsisSysAreaAuthenticationTable | 1.3.6.1.4.1.4874.2.2.38.1.1.6 | not-accessible | This table contains the manually configured set of area authentication keys supported by each instance of the Integrated ISIS protocol. | |
| juniIsisSysAreaAuthenticationEntry | 1.3.6.1.4.1.4874.2.2.38.1.1.6.1 | not-accessible | Each entry contains one area authentication key supported by an instance of the Integrated ISIS protocol. | |
| I32 juniIsisSysAreaAuthenticationSysInstance | 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.1 | Integer32 | not-accessible | The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. |
| I32 juniIsisSysAreaAuthenticationKeyId | 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.2 | Integer32 | not-accessible | The unique identifier of the instance to which this row corresponds. This object follows the index behaviour. |
| OCT juniIsisSysAreaAuthenticationPwd | 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.3 | OCTET STRING | read-write | The value to be used as the Authentication Key in Level 1 Link State Packets whenever the value of juniIsisSysAreaAuthenticationKeyType has a value of plaintext or hmacMd5. A modification of juniIsisSysAreaAuthenticationKeyType does not modify the juniIsisSysAreaAuthenticationPwd value. Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object. |
| INT juniIsisSysAreaAuthenticationKeyType | 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.4 | INTEGER | read-write | What authentication scheme, if any, is used to protect Level 1 Link State packets and sequence number packets |
| AUT juniIsisSysAreaAuthenticationStartAcceptTime | 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.5 | AuthTime | read-write | The date and time when this authentication key will start to be used to validate level 1 LSPs and SNPs received. The Default value the start accept time will be the current time when the key was created |
| AUT juniIsisSysAreaAuthenticationStartGenerateTime | 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.6 | AuthTime | read-write | The date and time when this authentication key will start to be used to authenticate level 1 LSPs and SNPs transmitted. The Default value the start accept time will be the current time when the key was created + 2 minutes |
| AUT juniIsisSysAreaAuthenticationStopAcceptTime | 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.7 | AuthTime | read-write | The date and time when this authentication key will stop being accepted as a valid level 1 LSP and SNP key received. A value of zero indicates the key will never stop being used to authenticate packets. |
| AUT juniIsisSysAreaAuthenticationStopGenerateTime | 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.8 | AuthTime | read-write | The date and time when this authentication key will stop being used to authenticate level 1 LSPs and SNPs transmitted. A value of zero indicates the key will never stop being used to authenticate packets. |
| ROW juniIsisSysAreaAuthenticationRowStatus | 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.9 | RowStatus | read-write | The existence state of this authentication key. This object follows the RowStatus behaviour. |
| juniIsisSysDomainAuthenticationTable | 1.3.6.1.4.1.4874.2.2.38.1.1.7 | not-accessible | This table contains the manually configured set of domain authentication keys supported by each instance of the Integrated ISIS protocol. | |
| juniIsisSysDomainAuthenticationEntry | 1.3.6.1.4.1.4874.2.2.38.1.1.7.1 | not-accessible | Each entry contains one domain authentication key supported by an instance of the Integrated ISIS protocol. | |
| I32 juniIsisSysDomainAuthenticationSysInstance | 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.1 | Integer32 | not-accessible | The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. |
| I32 juniIsisSysDomainAuthenticationKeyId | 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.2 | Integer32 | not-accessible | The unique identifier of the instance to which this row corresponds. This object follows the index behaviour. |
| OCT juniIsisSysDomainAuthenticationPwd | 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.3 | OCTET STRING | read-write | The value to be used as the Authentication Key in Level 2 Link State Packets whenever the value of juniIsisSysDomainAuthenticationKeyType has a value of plaintext or hmacMd5. A modification of juniIsisSysDomainAuthenticationKeyType does not modify the juniIsisSysDomainAuthenticationPwd value. Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object. |
| INT juniIsisSysDomainAuthenticationKeyType | 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.4 | INTEGER | read-write | What authentication scheme, if any, is used to protect Level 2 Link State packets and Sequence Number packets |
| AUT juniIsisSysDomainAuthenticationStartAcceptTime | 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.5 | AuthTime | read-write | The date and time when this authentication key will start to be used to validate level 2 LSPs and SNPs received. The Default value the start accept time will be the current time when the key was created |
| AUT juniIsisSysDomainAuthenticationStartGenerateTime | 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.6 | AuthTime | read-write | The date and time when this authentication key will start to be used to authenticate level 2 LSPs and SNPs transmitted. The Default value the start accept time will be the current time when the key was created + 2 minutes |
| AUT juniIsisSysDomainAuthenticationStopAcceptTime | 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.7 | AuthTime | read-write | The date and time when this authentication key will stop being accepted as a valid level 2 LSP and SNP key received. A value of zero indicates the key will never stop being used to authenticate packets. |
| AUT juniIsisSysDomainAuthenticationStopGenerateTime | 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.8 | AuthTime | read-write | The date and time when this authentication key will stop being used to authenticate level 2 LSPs and SNPs transmitted. A value of zero indicates the key will never stop being used to authenticate packets. |
| ROW juniIsisSysDomainAuthenticationRowStatus | 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.9 | RowStatus | read-write | The existence state of this authentication key. This object follows the RowStatus behaviour. |
| juniIsisMplsTeTunnelTable | 1.3.6.1.4.1.4874.2.2.38.1.1.8 | not-accessible | The set of tunnels imported from MPLS. | |
| juniIsisMplsTeTunnelEntry | 1.3.6.1.4.1.4874.2.2.38.1.1.8.1 | not-accessible | Each entry contains metric details of an MPLS LSP | |
| I32 juniIsisMplsTeTunnelSysInstance | 1.3.6.1.4.1.4874.2.2.38.1.1.8.1.1 | Integer32 | not-accessible | The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. |
| I32 juniIsisMplsNextHopIndex | 1.3.6.1.4.1.4874.2.2.38.1.1.8.1.2 | Integer32 | not-accessible | An index to uniquely identify the tunnels. |
| SYS juniIsisMplsTeSystemId | 1.3.6.1.4.1.4874.2.2.38.1.1.8.1.3 | SystemID | read-only | The ID for the instance of the Integrated IS-IS protocol running in the tunnel's end point. |
| IP juniIsisMplsTeRouterId | 1.3.6.1.4.1.4874.2.2.38.1.1.8.1.4 | IpAddress | read-only | The router ID of the tunnel's end point. |
| I32 juniIsisMplsTeTunnelMetric | 1.3.6.1.4.1.4874.2.2.38.1.1.8.1.5 | Integer32 | read-only | The metric associated with the tunnel. |
| I32 juniIsisMplsTeTunnelRelMetric | 1.3.6.1.4.1.4874.2.2.38.1.1.8.1.6 | Integer32 | read-only | The metric associated with the tunnel relative to the spf path. |
| OCT juniIsisMplsTeTunnelName | 1.3.6.1.4.1.4874.2.2.38.1.1.8.1.7 | OCTET STRING | read-only | The name associated with the tunnel. |
| juniIsisCircuitGroup | 1.3.6.1.4.1.4874.2.2.38.1.2 | |||
| juniIsisCircTable | 1.3.6.1.4.1.4874.2.2.38.1.2.1 | not-accessible | The table of circuits used by each instance of Integrated IS-IS on this system. | |
| juniIsisCircEntry | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1 | not-accessible | An juniIsisCircEntry exists for each circuit used by Integrated IS-IS on this system. | |
| I32 juniIsisCircSysInstance | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.1 | Integer32 | not-accessible | The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. |
| I32 juniIsisCircIfIndex | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.2 | Integer32 | not-accessible | The value of ifIndex for the interface to which this circuit corresponds. |
| I32 juniIsisCircLocalID | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.3 | Integer32 | read-only | An identification that can be used in protocol packets to identify a circuit. Implementations may devise ways to assure that this value is suitable for the circuit it is used on. LAN packets only have space for 8 bits. Values of juniIsisCircLocalID do not need to be unique. They are only required to differ on LANs where the Intermediate System is the Designated Intermediate System. |
| OPE juniIsisCircOperState | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.4 | OperState | read-write | The operational state of the circuit. This object follows the operationalState behaviour. |
| ROW juniIsisCircRowStatus | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.5 | RowStatus | read-write | The existence state of this circuit. This object follows the RowStatus behaviour. |
| INT juniIsisCircType | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.6 | INTEGER | read-only | The type of the circuit. This object follows the replaceOnlyWhileDisabled behaviour. The type specified must be compatible with the type of the interface defined by the value of juniIsisCircIfIndex. |
| JUN juniIsisCircL1DefaultMetric | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.7 | JuniDefaultMetric | read-write | The default metric value of this circuit for Level 1 traffic. |
| OTH juniIsisCircL1DelayMetric | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.8 | OtherMetric | read-only | The delay metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported. |
| OTH juniIsisCircL1ExpenseMetric | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.9 | OtherMetric | read-only | The expense metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported. |
| OTH juniIsisCircL1ErrorMetric | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.10 | OtherMetric | read-only | The error metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported. |
| T/F juniIsisCircExtDomain | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.11 | TruthValue | read-only | If true, suppress normal transmission of and interpretation of Intra-domain ISIS PDUs on this circuit. |
| C32 juniIsisCircAdjChanges | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.12 | Counter32 | read-only | The number of times an adjacency state change has occurred on this circuit. |
| C32 juniIsisCircInitFails | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.13 | Counter32 | read-only | The number of times initialization of this circuit has failed. |
| C32 juniIsisCircRejAdjs | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.14 | Counter32 | read-only | The number of times an adjacency has been rejected on this circuit. |
| C32 juniIsisCircOutCtrlPDUs | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.15 | Counter32 | read-only | The number of IS-IS control PDUs sent on this circuit. |
| C32 juniIsisCircInCtrlPDUs | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.16 | Counter32 | read-only | The number of IS-IS control PDUs received on this circuit. |
| C32 juniIsisCircIDFieldLenMismatches | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.17 | Counter32 | read-only | The number of times an IS-IS control PDU with an ID field length different to that for this system has been received. |
| JUN juniIsisCircL2DefaultMetric | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.18 | JuniDefaultMetric | read-write | The default metric value of this circuit for level 2 traffic. |
| OTH juniIsisCircL2DelayMetric | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.19 | OtherMetric | read-only | The delay metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported. |
| OTH juniIsisCircL2ExpenseMetric | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.20 | OtherMetric | read-only | The expense metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported. |
| OTH juniIsisCircL2ErrorMetric | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.21 | OtherMetric | read-only | The error metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported. |
| T/F juniIsisCircManL2Only | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.22 | TruthValue | read-only | When true, indicates that this circuit is to be used only for level 2. This object follows the replaceOnlyWhileDisabled behaviour. |
| ISP juniIsisCircL1ISPriority | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.23 | ISPriority | read-write | The priority for becoming LAN Level 1 Deignated Intermediate System on a broadcast circuit. |
| CIR juniIsisCircL1CircID | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.24 | CircuitID | read-only | The LAN ID allocated by the LAN Level 1 Designated Intermediate System. Where this system is not aware of the value (because it is not participating in the Level 1 Designated Intermediate System election), this object has the value which would be proposed for this circuit (i.e. the concatenation of the local system ID and the one octet local Circuit ID for this circuit. |
| SYS juniIsisCircL1DesIS | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.25 | SystemID | read-only | The ID of the LAN Level 1 Designated Intermediate System on this circuit. If, for any reason this system is not partaking in the relevant Designated Intermediate System election process, then the value returned is the zero length OCTET STRING. |
| C32 juniIsisCircLANL1DesISChanges | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.26 | Counter32 | read-only | The number of times the LAN Level 1 Designated Intermediate System has changed. |
| ISP juniIsisCircL2ISPriority | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.27 | ISPriority | read-write | The priority for becoming LAN level 2 Designated Intermediate System. |
| CIR juniIsisCircL2CircID | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.28 | CircuitID | read-only | The LAN ID allocated by the LAN Level 2 Designated Intermediate System. Where this system is not aware of this value (because it is not participating in the Level 2 Designated Intermediate System election), this object has the value which would be proposed for this circuit (i.e. the concatenation of the local system ID and the one octet local Circuit ID for this circuit. |
| SYS juniIsisCircL2DesIS | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.29 | SystemID | read-only | The ID of the LAN Level 2 Designated Intermediate System on this circuit. If, for any reason, this system is not partaking in the relevant Designated Intermediate System election process, then the value returned is the zero length OCTET STRING. |
| C32 juniIsisCircLANL2DesISChanges | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.30 | Counter32 | read-only | The number of times the LAN Level 2 Designated Intermediate System has changed. |
| INT juniIsisCircMCAddr | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.31 | INTEGER | read-only | Specifies which type of multicast address will be used for sending HELLO PDUs on this circuit. |
| CIR juniIsisCircPtToPtCircID | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.32 | CircuitID | read-only | The ID of the circuit allocated during initialization. If no value has been negotiated (either because the adjacency is to an End System, or because initialization has not yet successfully completed), this object has the value which would be proposed for this circuit (i.e. the concatenation of the local system ID and the one octet local Circuit ID for this circuit. |
| I32 juniIsisCircL1HelloTimer | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.33 | Integer32 | read-write | Maximum period, in seconds, between Level 1 IIH PDUs on multiaccess networks. It is also used as the period between Hellos on point to point circuits. This object follows the resettingTimer behaviour. |
| I32 juniIsisCircL2HelloTimer | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.34 | Integer32 | read-write | Maximum period, in seconds, between Level 1 IIH PDUs on multiaccess networks. This object follows the resettingTimer behaviour. |
| I32 juniIsisCircL1HelloMultiplier | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.35 | Integer32 | read-write | This value is multiplied by the corresponding HelloTimer and the result in seconds (rounded up) is used as the holding time in transmitted hellos, to be used by receivers of hello packets from this IS. |
| I32 juniIsisCircL2HelloMultiplier | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.36 | Integer32 | read-write | This value is multiplied by the corresponding HelloTimer and the result in seconds (rounded up) is used as the holding time in transmitted hellos, to be used by receivers of hello packets from this IS |
| U32 juniIsisCircMinLSPTransInt | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.37 | Unsigned32 | read-write | Minimum interval, in milliseconds, between transmission of LSPs on a circuit. This object follows the resettingTimer behaviour. This timer shall be capable of a resolution not coarser than 10 milliseconds. |
| I32 juniIsisCircMinLSPReTransInt | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.38 | Integer32 | read-write | Minimum interval, in seconds, between re-transmission of an Level 1 or 2 LSP. This object follows the resettingTimer behaviour. |
| I32 juniIsisCircL1CSNPInterval | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.39 | Integer32 | read-write | Interval of time, in seconds, between transmission of Level 1 CSNPs on multiaccess networks if this router is the designated router. On point-to-point networks the default is to not transmit CSNPs. Hence CSNP interval will be 0 for point-to-point networks. |
| I32 juniIsisCircL2CSNPInterval | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.40 | Integer32 | read-write | Interval of time, in seconds, between transmission of Level 2 CSNPs on multiaccess networks if this router is the designated router. On point-to-point networks the default is to not transmit CSNPs. Hence CSNP interval will be 0 for point-to-point networks. |
| I32 juniIsisCircLSPThrottle | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.41 | Integer32 | read-write | Minimal interval of time, in milliseconds, between retransmissions of LSPs on a point to point interface. |
| INT juniIsisCircMeshGroupEnabled | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.42 | INTEGER | read-write | Is this port a member of a mesh group, or blocked? Circuits in the same mesh group act as a virtual multiaccess network. LSPs seen on one circuit in a mesh group will not be flooded to another circuit in the same mesh group. |
| U32 juniIsisCircMeshGroup | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.43 | Unsigned32 | read-write | Circuits in the same mesh group act as a virtual multiaccess network. LSPs seen on one circuit in a mesh group will not be flooded to another circuit in the same mesh group. If juniIsisCircMeshGroupEnabled is false, this value is ignored. Default value returned as 0 has no significance for this variable. |
| INT juniIsisCircLevel | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.44 | INTEGER | read-write | The type of this circuit. This object follows the replaceOnlyWhileDisabled behavior. |
| INT juniIsisCircState | 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.45 | INTEGER | read-only | The operational state of the circuit. |
| juniIsisSysL1CircAuthenticationTable | 1.3.6.1.4.1.4874.2.2.38.1.2.2 | not-accessible | This table contains the manually configured set of Level 1 Circuit authentication keys supported by each instance of the Integrated ISIS protocol. | |
| juniIsisSysL1CircAuthenticationEntry | 1.3.6.1.4.1.4874.2.2.38.1.2.2.1 | not-accessible | Each entry contains one Level 1 circuit authentication key supported by an instance of the Integrated ISIS protocol. | |
| I32 juniIsisSysL1CircAuthenticationSysInstance | 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.1 | Integer32 | not-accessible | The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. |
| I32 juniIsisSysL1CircAuthenticationIfIndex | 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.2 | Integer32 | not-accessible | The value of ifIndex for the interface to which this circuit corresponds. |
| I32 juniIsisSysL1CircAuthenticationKeyId | 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.3 | Integer32 | not-accessible | The unique identifier of the instance to which this row corresponds. This object follows the index behaviour. |
| OCT juniIsisSysL1CircAuthenticationPwd | 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.4 | OCTET STRING | read-write | The value to be used as the Authentication Key in Level 1 Hello Packets whenever the value of juniIsisSysL1CircAuthenticationKeyType has a value of hmacMd5. A modification of juniIsisSysL1CircAuthenticationKeyType does not modify the juniIsisSysL1CircAuthenticationPwd value. Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object. |
| INT juniIsisSysL1CircAuthenticationKeyType | 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.5 | INTEGER | read-write | What authentication scheme, if any, is used to protect Level 1 hello packets. |
| AUT juniIsisSysL1CircAuthenticationStartAcceptTime | 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.6 | AuthTime | read-write | The date and time when this authentication key will start to be used to validate level 1 IIH packets received. The Default value the start accept time will be the current time when the key was created. |
| AUT juniIsisSysL1CircAuthenticationStartGenerateTime | 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.7 | AuthTime | read-write | The date and time when this authentication key will start to be used to authenticate level 1 IIH packets transmitted. The Default value the start accept time will be the current time when the key was created + 2 minutes. |
| AUT juniIsisSysL1CircAuthenticationStopAcceptTime | 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.8 | AuthTime | read-write | The date and time when this authentication key will stop being accepted as a valid level 1 IIH packets key received. A value of zero indicates the key will never stop being used to authenticate packets. |
| AUT juniIsisSysL1CircAuthenticationStopGenerateTime | 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.9 | AuthTime | read-write | The date and time when this authentication key will stop being used to authenticate level 1 IIH packets transmitted. A value of zero indicates the key will never stop being used to authenticate packets. |
| ROW juniIsisSysL1CircAuthenticationRowStatus | 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.10 | RowStatus | read-write | The existence state of this authentication key. This object follows the RowStatus behaviour. |
| juniIsisSysL2CircAuthenticationTable | 1.3.6.1.4.1.4874.2.2.38.1.2.3 | not-accessible | This table contains the manually configured set of Level 2 Circuit authentication keys supported by each instance of the Integrated ISIS protocol. | |
| juniIsisSysL2CircAuthenticationEntry | 1.3.6.1.4.1.4874.2.2.38.1.2.3.1 | not-accessible | Each entry contains one Level 2 circuit authentication key supported by an instance of the Integrated ISIS protocol. | |
| I32 juniIsisSysL2CircAuthenticationSysInstance | 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.1 | Integer32 | not-accessible | The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. |
| I32 juniIsisSysL2CircAuthenticationIfIndex | 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.2 | Integer32 | not-accessible | The value of ifIndex for the interface to which this circuit corresponds. |
| I32 juniIsisSysL2CircAuthenticationKeyId | 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.3 | Integer32 | not-accessible | The unique identifier of the instance to which this row corresponds. This object follows the index behaviour. |
| OCT juniIsisSysL2CircAuthenticationPwd | 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.4 | OCTET STRING | read-write | The value to be used as the Authentication Key in Level 2 Hello Packets whenever the value of juniIsisSysL2CircAuthenticationKeyType has a value of hmacMd5. A modification of juniIsisSysL2CircAuthenticationKeyType does not modify the juniIsisSysL2CircAuthenticationPwd value. Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object. |
| INT juniIsisSysL2CircAuthenticationKeyType | 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.5 | INTEGER | read-write | What authentication scheme, if any, is used to protect Level 2 hello packets. |
| AUT juniIsisSysL2CircAuthenticationStartAcceptTime | 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.6 | AuthTime | read-write | The date and time when this authentication key will start to be used to validate level 2 IIH packets received. The Default value the start accept time will be the current time when the key was created. |
| AUT juniIsisSysL2CircAuthenticationStartGenerateTime | 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.7 | AuthTime | read-write | The date and time when this authentication key will start to be used to authenticate level 2 IIH packets transmitted. The Default value the start accept time will be the current time when the key was created + 2 minutes. |
| AUT juniIsisSysL2CircAuthenticationStopAcceptTime | 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.8 | AuthTime | read-write | The date and time when this authentication key will stop being accepted as a valid level 2 IIH packets key received. A value of zero indicates the key will never stop being used to authenticate packets. |
| AUT juniIsisSysL2CircAuthenticationStopGenerateTime | 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.9 | AuthTime | read-write | The date and time when this authentication key will stop being used to authenticate level 2 IIH packets transmitted. A value of zero indicates the key will never stop being used to authenticate packets. |
| ROW juniIsisSysL2CircAuthenticationRowStatus | 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.10 | RowStatus | read-write | The existence state of this authentication key. This object follows the RowStatus behaviour. |
| juniIsisCircBFDTable | 1.3.6.1.4.1.4874.2.2.38.1.2.4 | not-accessible | The Juniper ISIS circuit table describes the BFD-specific characteristics of interfaces. | |
| juniIsisCircBFDEntry | 1.3.6.1.4.1.4874.2.2.38.1.2.4.1 | not-accessible | The Juniper ISIS circuit table describes the BFD-specific characteristics of one interface. | |
| T/F juniIsisCircBfdEnable | 1.3.6.1.4.1.4874.2.2.38.1.2.4.1.1 | TruthValue | read-create | This variable indicates whether BFD session on the interface is active or not |
| I32 juniIsisCircBfdMinRxInterval | 1.3.6.1.4.1.4874.2.2.38.1.2.4.1.2 | Integer32 | read-create | This variable specifies upper-limit on rate local-system requires remote-system to transmit bfd control-packets [milliseconds] |
| I32 juniIsisCircBfdMinTxInterval | 1.3.6.1.4.1.4874.2.2.38.1.2.4.1.3 | Integer32 | read-create | This variable specifies lower-limit on rate local-system requires remote-system to transmit bfd control-packets [milliseconds] |
| I32 juniIsisCircBfdMultiplier | 1.3.6.1.4.1.4874.2.2.38.1.2.4.1.4 | Integer32 | read-create | This variable specifies detection-multiplier |
| juniIsisTrapGroup | 1.3.6.1.4.1.4874.2.2.38.2 | |||
| juniIsisConformance | 1.3.6.1.4.1.4874.2.2.38.3 | |||
| juniIsisCompliances | 1.3.6.1.4.1.4874.2.2.38.3.1 | |||
| juniIsisCompliance | 1.3.6.1.4.1.4874.2.2.38.3.1.1 | Obsolete compliance statement for systems supporting ISIS functionality. This statement became obsolete when the juniIsisCircState object was added. | ||
| juniIsisCompliance2 | 1.3.6.1.4.1.4874.2.2.38.3.1.2 | Obsolete compliance statement for systems supporting ISIS functionality. This statement became obsolete when MPSL support was added. | ||
| juniIsisCompliance3 | 1.3.6.1.4.1.4874.2.2.38.3.1.3 | The compliance statement for systems supporting ISIS functionality. This statement became obsolete when juniIsisCircBFDTable is implemented. | ||
| juniIsisCompliance4 | 1.3.6.1.4.1.4874.2.2.38.3.1.4 | The compliance statement for systems supporting ISIS functionality. | ||
| juniIsisCompliance5 | 1.3.6.1.4.1.4874.2.2.38.3.1.5 | The compliance statement for systems supporting ISIS functionality. | ||
| juniIsisCompliance6 | 1.3.6.1.4.1.4874.2.2.38.3.1.6 | The compliance statement for systems supporting ISIS functionality. | ||
| juniIsisMIBGroups | 1.3.6.1.4.1.4874.2.2.38.3.2 | |||
| juniIsisSystemMgmtGroup | 1.3.6.1.4.1.4874.2.2.38.3.2.1 | Obsolete system level objects for ISIS management functionality. This group became obsolete when the MPLS management objects were added. | ||
| juniIsisCircuitMgmtGroup | 1.3.6.1.4.1.4874.2.2.38.3.2.2 | Obsolete circuit management objects. This group became obsolete when the juniIsisCircState object was added. | ||
| juniIsisCircuitMgmtGroup2 | 1.3.6.1.4.1.4874.2.2.38.3.2.3 | The circuit management objects. | ||
| juniIsisSystemMgmtGroup2 | 1.3.6.1.4.1.4874.2.2.38.3.2.4 | Obsolete system level objects for ISIS management functionality. This group became obsolete when the MPLS tunnel table was added. | ||
| juniIsisCircBFDGroup | 1.3.6.1.4.1.4874.2.2.38.3.2.5 | The circuit level ISIS BFD configuration parameters. | ||
| juniIsisSystemMgmtGroup3 | 1.3.6.1.4.1.4874.2.2.38.3.2.6 | Obsolete system level objects for ISIS management functionality. This group became obsolete when the reference bandwidth related variables were added. | ||
| juniIsisSystemMgmtGroup4 | 1.3.6.1.4.1.4874.2.2.38.3.2.7 | The system level objects for ISIS management functionality. |
RFC description
Juniper Intermediate System-to-Intermediate System (IS-IS) routing protocol MIB; manages IS-IS routing configuration and performance on E-series devices.
Start monitoring Juniper E-series router (IS-IS routing protocol) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.