Juniper-E2-Registry

All MIBs › Juniper-E2-Registry

Organization: Juniper Networks, Inc.

Last Updated: 2004-05-19

Category: Textual Conventions and Registries, Vendor: Juniper

Description: Defines the OID registration subtree for Juniper Networks E2-series router platform MIB modules.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Juniper-E2-Registry?

Juniper-E2-Registry is a Juniper Networks registration MIB that defines the OID subtree and enumerated AutonomousType values (juniE2EntPhysicalType) used to identify specific hardware module and chassis component types on second-generation Juniper E-series routers. It is not itself a data-bearing MIB with counters or state; it functions as a lookup registry assigning unique OIDs to each physical card, module, or chassis type as new hardware becomes available. Its practical use in monitoring is indirect: when a management station polls the standard ENTITY-MIB's entPhysicalVendorType, these registry OIDs let it translate that value into the specific Juniper hardware model (line card, PIC, chassis) installed. It depends directly on the IETF ENTITY-MIB (RFC 2737), whose entPhysicalVendorType object references these registered OIDs. It is deployed alongside the ENTITY-MIB wherever Juniper second-generation E-series hardware inventory needs precise identification, drawing on the Juniper-E2-Registry OID tree to map vendor type values to actual hardware models.

IPNetwork Monitor allows you to monitor SNMP objects defined in Juniper-E2-Registry. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Juniper E-series routers (second generation)

Monitoring Examples

This module is a registry/type-definition rather than one exposing pollable runtime data; its only object, juniE2EntPhysicalType, is an OID assignment referenced by ENTITY-MIB's entPhysicalVendorType rather than something an admin polls directly for status.

Imported Objects

From Juniper-Registry

juniAdmin

MODULE-IDENTITY

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Description
juniE2Registry	1.3.6.1.4.1.4874.4.2.3	Juniper second generation E-series product family system-specific object identification values. This module defines AutonomousType (OID) values for all the physical entity types (entPhysicalVendorType). This module will be updated whenever a new type of module or other hardware becomes available in second generation E-series systems.
juniE2EntPhysicalType	1.3.6.1.4.1.4874.4.2.3.1
e2Chassis	1.3.6.1.4.1.4874.4.2.3.1.1	The vendor type ID for a second generation E-series chassis. This identifies an 'overall' physical entity for any second generation E-series system.
e320Chassis	1.3.6.1.4.1.4874.4.2.3.1.1.1	The vendor type ID for an E320 chassis. This is the 'overall' physical entity for an E320 system.
e2FanAssembly	1.3.6.1.4.1.4874.4.2.3.1.2	The vendor type ID for a second generation E-series fan assembly.
e320PrimaryFanAssembly	1.3.6.1.4.1.4874.4.2.3.1.2.1	The vendor type ID for the primary fan assembly for an E320 chassis.
e320AuxiliaryFanAssembly	1.3.6.1.4.1.4874.4.2.3.1.2.2	The vendor type ID for the auxiliary fan assembly for an E320 chassis.
e2PowerInput	1.3.6.1.4.1.4874.4.2.3.1.3	The vendor type ID for a second generation E-series power distribution module.
e320PowerDistributionModule	1.3.6.1.4.1.4874.4.2.3.1.3.1	The vendor type ID for the power distribution module for an E320 chassis.
e2Midplane	1.3.6.1.4.1.4874.4.2.3.1.4	The vendor type ID for a second generation E-series midplane.
e320Midplane	1.3.6.1.4.1.4874.4.2.3.1.4.1	The vendor type ID for the midplane for an E320 chassis.
e2SrpModule	1.3.6.1.4.1.4874.4.2.3.1.5	The vendor type ID for a second generation E-series system controller/ switch fabric module.
e320Srp100Module	1.3.6.1.4.1.4874.4.2.3.1.5.1	The vendor type ID for an integrated system contoller/switch fabric module for an E320 chassis.
e320Srp320Module	1.3.6.1.4.1.4874.4.2.3.1.5.99	The vendor type ID for an integrated system contoller/switch fabric module for an E320 chassis. For internal use only.
e2SwitchFabricModule	1.3.6.1.4.1.4874.4.2.3.1.6	The vendor type ID for a second generation E-series switch fabric module.
e320FabricSlice100Module	1.3.6.1.4.1.4874.4.2.3.1.6.1	The vendor type ID for a switch fabric module for an E320 chassis. For internal use only.
e320FabricSlice320Module	1.3.6.1.4.1.4874.4.2.3.1.6.99	The vendor type ID for a switch fabric module for an E320 chassis. For internal use only.
e2SrpIoa	1.3.6.1.4.1.4874.4.2.3.1.7	The vendor type ID for the system controller I/O adapter for a second generation E-series system.
e320SrpIoa	1.3.6.1.4.1.4874.4.2.3.1.7.1	The vendor type ID for an SRP IOA for an E320 chassis.
e2ForwardingModule	1.3.6.1.4.1.4874.4.2.3.1.8	The vendor type ID for a second generation E-series forwarding module.
e3204gLeModule	1.3.6.1.4.1.4874.4.2.3.1.8.1	The vendor type ID for a 4 Gigabit Line Card for an E320 chassis.
e320Ge4PortModule	1.3.6.1.4.1.4874.4.2.3.1.8.2	The vendor type ID for a Gigabit Ethernet 4 Port line card for an E320 chassis.
e320Oc48Pos1PortModule	1.3.6.1.4.1.4874.4.2.3.1.8.3	The vendor type ID for an OC48 POS 1 Port line card for an E320 chassis.
e320Oc48RPos1PortModule	1.3.6.1.4.1.4874.4.2.3.1.8.4	The vendor type ID for an OC48R POS 1 Port line card for an E320 chassis.
e320OcXModule	1.3.6.1.4.1.4874.4.2.3.1.8.5	The vendor type ID for an OCx line card for an E320 chassis.
e320MfgSerdesTestModule	1.3.6.1.4.1.4874.4.2.3.1.8.99	The vendor type ID for a Manufacturing Serdes Test line card for an E320 chassis. For internal use only.
e2ForwardingIoa	1.3.6.1.4.1.4874.4.2.3.1.9	The vendor type ID for a second generation E-series I/O adapter for a forwarding module.
e3204GeIoa	1.3.6.1.4.1.4874.4.2.3.1.9.1	The vendor type ID for a 4GE IOA for an E320 chassis.
e320Oc48PosIoa	1.3.6.1.4.1.4874.4.2.3.1.9.2	The vendor type ID for an OC48 POS IOA for an E320 chassis.
e320Oc48RPosIoa	1.3.6.1.4.1.4874.4.2.3.1.9.3	The vendor type ID for an OC48R POS IOA for an E320 chassis.

RFC description

Registry for Juniper E-series edge router physical entity types and hardware identification.

Start monitoring Juniper E-series router, second generation (hardware-component OID registry) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Juniper-E2-Registry

What Is Juniper-E2-Registry?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description