Juniper-BGP-CONF

All MIBs › Juniper-BGP-CONF

Organization: Juniper Networks, Inc.

Last Updated: 2007-05-11

Category: Protocol: BGP, Routing Protocols, Vendor: Juniper

Description: Conformance and compliance statements covering management of the BGP routing protocol on Juniper Networks E-series routers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Juniper-BGP-CONF?

Juniper-BGP-CONF is an AGENT-CAPABILITIES conformance module describing which parts of the BGP4-MIB (and related BGP management objects) are supported by the SNMP agent on Juniper Networks E-series routers, rather than a data-carrying MIB itself. It does not expose its own runtime tables of BGP peer or route data; instead it documents implementation-specific variations, restrictions, and support levels for objects defined elsewhere. Consequently it has no direct role in hardware/software status monitoring; its purpose is purely to inform management applications about SNMP agent capability/compliance for BGP on this platform. It is explicitly dependent on the standard BGP4-MIB and describes the Juniper E-series SNMP agent implementation of it. It is used during network management system integration/testing on Juniper E-series routers to determine which BGP MIB objects are safe to poll or set on that platform. Engineers can download the Juniper-BGP-CONF file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Juniper-BGP-CONF. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Juniper Networks E-series router

Monitoring Examples

This module has no sample objects because it is an AGENT-CAPABILITIES conformance module, not a data MIB, so it defines no runtime tables to poll. It is only consulted by management tools to determine which BGP4-MIB objects (e.g. peer state tables) the Juniper E-series agent actually implements, not to retrieve monitoring data directly.

Imported Objects

From Juniper-Agents

juniAgents

MODULE-IDENTITY

From SNMPv2-CONF

AGENT-CAPABILITIES

From SNMPv2-SMI

MODULE-IDENTITY

OIDs

OID symbolic	OID numeric	Description
juniBgpAgent	1.3.6.1.4.1.4874.5.2.4	The agent capabilities definitions for the BGP component of the SNMP agent in the Juniper E-series family of products.
juniBgpAgentV1	1.3.6.1.4.1.4874.5.2.4.1	The MIB supported by the SNMP agent for the BGP application in JUNOSe. These capabilities became obsolete when a new object was added to the general configuration group.
juniBgpAgentV2	1.3.6.1.4.1.4874.5.2.4.2	The MIB supported by the SNMP agent for the BGP application in JUNOSe. These capabilities became obsolete when the BGP route congiguration group was replaced with new tables containing the original route destination as an additional index.
juniBgpAgentV3	1.3.6.1.4.1.4874.5.2.4.3	The MIB supported by the SNMP agent for the BGP application in JUNOSe. These capabilities became obsolete when the peer and peer-group local-as support was added.
juniBgpAgentV4	1.3.6.1.4.1.4874.5.2.4.4	The MIB supported by the SNMP agent for the BGP application in JUNOSe. These capabilities became obsolete when support was added for adding unicast BGP routes into a multicast view.
juniBgpAgentV5	1.3.6.1.4.1.4874.5.2.4.5	The MIB supported by the SNMP agent for the BGP application in JUNOSe. These capabilities became obsolete when support was added for the standard BGP4-MIB and for BGP internal redistribute.
juniBgpAgentV6	1.3.6.1.4.1.4874.5.2.4.6	The MIBs supported by the SNMP agent for the BGP application in JUNOSe. These capabilities became obsolete when support was added to the Juniper-BGP-MIB for four-octet AS-numbers, dynamic capability negotiation, iBGP multipath and confederation peers filter-list.
juniBgpAgentV7	1.3.6.1.4.1.4874.5.2.4.7	The MIBs supported by the SNMP agent for the BGP application in JUNOSe. These capabilities became obsolete when support was added to the Juniper-BGP-MIB for neighbor site-of-origin and peer leniency.
juniBgpAgentV8	1.3.6.1.4.1.4874.5.2.4.8	The MIBs supported by the SNMP agent for the BGP application in JUNOSe. These capabilities became obsolete when support was added to the Juniper-BGP-MIB for several new features.
juniBgpAgentV9	1.3.6.1.4.1.4874.5.2.4.9	The MIBs supported by the SNMP agent for the BGP application in JUNOSe. These capabilities became obsolete when support was added to the Juniper-BGP-MIB for send-label, carrier's carrier feature for BGP/MPLS VPN and reconvergence after loss of MPLS next-hop.
juniBgpAgentV10	1.3.6.1.4.1.4874.5.2.4.10	The MIBs supported by the SNMP agent for the BGP application in JUNOSe. These capabilities became obsolete when support was added to the Juniper-BGP-MIB for route-map option in default-information originate and neighbor ... default-originate, and when support was added for the new dynamic capability negotiation draft.
juniBgpAgentV11	1.3.6.1.4.1.4874.5.2.4.11	The MIB supported by the SNMP agent for the BGP application in JUNOSe. These capabilities became obsolete when support was added to the Juniper-BGP-MIB for BGP conditional advertisement.
juniBgpAgentV12	1.3.6.1.4.1.4874.5.2.4.12	The MIB supported by the SNMP agent for the BGP application in JUNOSe.

RFC description

Defines conformance and compliance statements for BGP routing protocol management on Juniper Networks E-series routers.

Start monitoring Juniper Networks E-series router (agent capabilities, BGP) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Juniper-BGP-CONF

What Is Juniper-BGP-CONF?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description