JUNIPER-RPS-MIB

All MIBs › JUNIPER-RPS-MIB

Organization: Juniper Networks, Inc.

Last Updated: 2009--0-8-

Category: Domain: Power Management, Technology: High Availability, Vendor: Juniper

Description: Juniper Networks MIB for monitoring Redundant Power System (RPS) status on Juniper EX series switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is JUNIPER-RPS-MIB?

JUNIPER-RPS-MIB is a Juniper Networks enterprise MIB for monitoring Redundant Power System (RPS) status on Juniper EX-series switches. It defines management information for the redundant/backup power supply unit that provides failover power protection to the switch chassis. Its monitoring value is squarely hardware health status: whether the redundant power supply is present, its operational/power state, and whether it is actively supplying power or in a fault condition, which is critical for detecting power-related failure risk before it causes an outage. As a chassis-hardware MIB it is generally used alongside Juniper's broader chassis/environmental MIBs (such as JUNIPER-CHASSIS-DEFINES-MIB) for full environmental monitoring, though no explicit dependency is stated in the module description. It is deployed on Juniper EX-series switches in environments where redundant power supply units are installed for high availability, where a JUNIPER-RPS-MIB download equips operators to detect a failed or missing redundant supply before it becomes an outage.

IPNetwork Monitor allows you to monitor SNMP objects defined in JUNIPER-RPS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Juniper Networks EX-series switches

Monitoring Examples

No sample object names were provided for this module, so specific table or column names cannot be confirmed from source; the module description only states it defines management information for the redundant power supply. In practice an administrator would expect to poll RPS presence and operational-status objects to detect a failed or missing redundant power supply on an EX-series switch chassis, but naming exact objects here would be speculative given the lack of grounding data.

Imported Objects

From JUNIPER-EX-SMI

jnxRPS

OBJECT-IDENTITY

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
jnxRPSMIBObjects	1.3.6.1.4.1.2636.3.40.1.6.1			This module contains definitions of management information for Redundant power supply.
jnxRPSVersionTable	1.3.6.1.4.1.2636.3.40.1.6.1.1		not-accessible	A Table containing RPS Version details.
jnxRPSVersionEntry	1.3.6.1.4.1.2636.3.40.1.6.1.1.1		not-accessible	RPS Version details on a specific serial number.
STR jnxRPSSerialNumber	1.3.6.1.4.1.2636.3.40.1.6.1.1.1.1	DisplayString	not-accessible	The RPS Serial Number of the Chassis.
STR jnxRPSModel	1.3.6.1.4.1.2636.3.40.1.6.1.1.1.2	DisplayString	read-only	The RPS Model name of the Chassis.
STR jnxRPSFirmwareVersion	1.3.6.1.4.1.2636.3.40.1.6.1.1.1.3	DisplayString	read-only	The RPS Firmware version of the Chassis.
STR jnxRPSUBootVersion	1.3.6.1.4.1.2636.3.40.1.6.1.1.1.4	DisplayString	read-only	The RPS UBoot verison of the Chassis.
jnxRPSStatusTable	1.3.6.1.4.1.2636.3.40.1.6.1.2		not-accessible	A table containing RPS Fan and System Status for each slot.
jnxRPSStatusEntry	1.3.6.1.4.1.2636.3.40.1.6.1.2.1		not-accessible	Status information for each FAN and SYSTEM slot.
JNX jnxRPSFanStatus	1.3.6.1.4.1.2636.3.40.1.6.1.2.1.1	JnxRPSStatus	read-only	The RPS Fan Status on the chassis .
JNX jnxRPSSystemStatus	1.3.6.1.4.1.2636.3.40.1.6.1.2.1.2	JnxRPSStatus	read-only	The RPS System Status on the Chassis.
jnxRPSPowerSupplyTable	1.3.6.1.4.1.2636.3.40.1.6.1.3		not-accessible	A table containing RPS Power Supply details.
jnxRPSPowerSupplyEntry	1.3.6.1.4.1.2636.3.40.1.6.1.3.1		not-accessible	Information about Power Supply Status and Description.
I32 jnxRPSPowerSupplyIndex	1.3.6.1.4.1.2636.3.40.1.6.1.3.1.1	Integer32	not-accessible	The RPS Power Supply Index of the Chassis corresponding to RPS node.
I32 jnxRPSPowerSupplySlotId	1.3.6.1.4.1.2636.3.40.1.6.1.3.1.2	Integer32	read-only	The RPS Power Supply Slot ID f the Chassis corresponding to RPS node.
STR jnxRPSPowerSupplyStatus	1.3.6.1.4.1.2636.3.40.1.6.1.3.1.3	DisplayString	read-only	The RPS Power Supply Status of the Chassis corresponding to RPS node.
STR jnxRPSPowerSupplyDescription	1.3.6.1.4.1.2636.3.40.1.6.1.3.1.4	DisplayString	read-only	The RPS Power Supply Description of the Chassis corresponding to RPS node.
jnxRPSLedPortStatusTable	1.3.6.1.4.1.2636.3.40.1.6.1.4		not-accessible	A table containing RPS LED Status details.
jnxRPSLedPortStatusEntry	1.3.6.1.4.1.2636.3.40.1.6.1.4.1		not-accessible	LED Port status of each port.
I32 jnxRPSLedPortIndex	1.3.6.1.4.1.2636.3.40.1.6.1.4.1.1	Integer32	not-accessible	The RPS Led Port Index of the Chassis corresponding to RPS node.
STR jnxRPSLedPortStatus	1.3.6.1.4.1.2636.3.40.1.6.1.4.1.2	DisplayString	read-only	The RPS Led Port Status of the Chassis corresponding to RPS node.
jnxRPSPortStatusTable	1.3.6.1.4.1.2636.3.40.1.6.1.5		not-accessible	A table containing RPS Port Status details.
jnxRPSPortStatusEntry	1.3.6.1.4.1.2636.3.40.1.6.1.5.1		not-accessible	Port Priority and Status for each port .
I32 jnxRPSPortIndex	1.3.6.1.4.1.2636.3.40.1.6.1.5.1.1	Integer32	not-accessible	The RPS Port Index of the Chassis corresponding to RPS node.
I32 jnxRPSPortId	1.3.6.1.4.1.2636.3.40.1.6.1.5.1.2	Integer32	read-only	The RPS Port ID of the Chassis corresponding to RPS node.
I32 jnxRPSPortStatus	1.3.6.1.4.1.2636.3.40.1.6.1.5.1.3	Integer32	read-only	The RPS Port Status of the Chassis corresponding to RPS node.
I32 jnxRPSPortPriority	1.3.6.1.4.1.2636.3.40.1.6.1.5.1.4	Integer32	read-only	The RPS Port Priority of the Chassis corresponding to RPS node.
STR jnxRPSPortPowerRequested	1.3.6.1.4.1.2636.3.40.1.6.1.5.1.5	DisplayString	read-only	The RPS Led Port Power Requested of the Chassis corresponding to RPS node.

RFC description

Monitors redundant power supply status, version information, and health for Juniper EX-series switches.

Start monitoring Juniper Networks EX-series switch (Redundant Power System) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download JUNIPER-RPS-MIB

What Is JUNIPER-RPS-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description