JUNIPER-WX-MIB

All MIBs › JUNIPER-WX-MIB

Organization: Juniper Networks, Inc

Last Updated: 2004--0-5-

Category: Technology: WAN Optimization, Vendor: Juniper

Description: Juniper Networks WX series MIB providing comprehensive management objects for monitoring WAN acceleration and optimization devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is JUNIPER-WX-MIB?

This is the primary enterprise MIB for Juniper's WX Series WAN Acceleration family, providing the main set of managed objects for monitoring and configuring WAN optimization/compression behavior on these appliances. It exposes data covering WX system identity/configuration and, per the product's function, traffic acceleration statistics such as compression ratios, tunnel/peer status, and bandwidth savings, complementing the common and event MIBs in the same family. Monitoring emphasis covers both software/service status (whether acceleration tunnels/peers are established and operating) and performance metrics (compression/optimization throughput), making it the primary data source for assessing WAN acceleration health and effectiveness. It depends on JUNIPER-WX-COMMON-MIB for shared object roots/conventions and is referenced by JUNIPER-WX-EVENT-MIB's traps. It is deployed on Juniper WX Series appliances at branch offices and data centers to optimize and monitor WAN links between paired locations. Engineers can download the JUNIPER-WX-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in JUNIPER-WX-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Juniper WX Series WAN acceleration appliance

Monitoring Examples

No object or table names were provided in the input data for this module. Based on its role as the main WX Series MIB, a typical scenario would poll per-peer/tunnel tables for status and compression/bandwidth-savings statistics to confirm WAN acceleration is functioning between two paired appliances, but exact object names cannot be confirmed without the MIB source.

What Can Be Monitored

WAN acceleration tunnel/peer status
compression ratio / bandwidth savings
appliance configuration state

Imported Objects

From JUNIPER-WX-COMMON-MIB

jnxWxCommonEventDescr

OBJECT-TYPE

From JUNIPER-WX-GLOBAL-REG

jnxWxModules	OBJECT-IDENTITY
jnxWxSpecificMib	OBJECT-IDENTITY

From JUNIPER-WX-GLOBAL-TC

TcAppName
TcQosIdentifier

From SNMPv2-SMI

Counter64
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

TimeStamp

How to Use in IPNetwork Monitor

Example using jnxWxSysStatsBytesInAe OID:

Select a Juniper WX Series WAN acceleration appliance (primary managed objects) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type jnxWxSysStatsBytesInAe into the Find box to locate it in the OID tree, then select it and click OK. It reports the total number of bytes that entered the WX Assembly Engine since the system was started. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
jnxWxMibModule	1.3.6.1.4.1.8239.1.1.4			A MIB module containing definitions of managed objects for Juniper Networks' WAN Acceleration family of products.
jnxWxMib	1.3.6.1.4.1.8239.2.2.1			Sub-tree for WAN Acceleration MIB.
jnxWxConfMib	1.3.6.1.4.1.8239.2.2.1.1			Sub-tree for WAN Acceleration MIB conformance statements.
jnxWxObjs	1.3.6.1.4.1.8239.2.2.1.2			Sub-tree for WAN Acceleration MIB objects.
TIM jnxWxStatsUpdateTime	1.3.6.1.4.1.8239.2.2.1.2.1	TimeStamp	read-only	This is the value of sysUpTime when the WX stats (jnxWxSysStats, jnxWxAsm, jnxWxApp) were last updated. The management station can use this information to tell if it's downloading a consistent set of stats.
I32 jnxWxStatsAsmCountEx	1.3.6.1.4.1.8239.2.2.1.2.2	Integer32	read-only	The number of Decompressors this Compressor has had a session with at any time during the last two months.
I32 jnxWxStatsAppCount	1.3.6.1.4.1.8239.2.2.1.2.3	Integer32	read-only	The number of applications currently being monitored on this Compressor.
jnxWxSysStats	1.3.6.1.4.1.8239.2.2.1.2.4			Sub-tree for WAN Acceleration system statistics.
C64 jnxWxSysStatsBytesInAeEx	1.3.6.1.4.1.8239.2.2.1.2.4.1	Counter64	read-only	Total number of bytes that entered the WX Assembly Engine since the system was started.
C64 jnxWxSysStatsBytesOutAe	1.3.6.1.4.1.8239.2.2.1.2.4.2	Counter64	read-only	Total number of bytes that exited the WX Assembly Engine after assembly since the system was started.
C64 jnxWxSysStatsPktsInAe	1.3.6.1.4.1.8239.2.2.1.2.4.3	Counter64	read-only	Total number of packets that entered the WX Assembly Engine since the system was started.
C64 jnxWxSysStatsPktsOutAe	1.3.6.1.4.1.8239.2.2.1.2.4.4	Counter64	read-only	Total number of packets that exited the WX Assembly Engine after assembly since the system was started.
C64 jnxWxSysStatsBytesOutOob	1.3.6.1.4.1.8239.2.2.1.2.4.5	Counter64	read-only	Total number of out-of-band bytes sent to the control channel since the system was started.
C64 jnxWxSysStatsBytesPtNoAe	1.3.6.1.4.1.8239.2.2.1.2.4.6	Counter64	read-only	Total number of bytes that passed through the WX Compression Engine because there was no corresponding Assembly Engine WX, since the system was started.
C64 jnxWxSysStatsPktsPtNoAe	1.3.6.1.4.1.8239.2.2.1.2.4.7	Counter64	read-only	Total number of packets that passed through the WX Compression Engine because there was no corresponding Assembly Engine WX, since the system was started.
C64 jnxWxSysStatsBytesPtFilter	1.3.6.1.4.1.8239.2.2.1.2.4.8	Counter64	read-only	Total number of bytes that passed through the WX Compression Engine due to a manually configured filter (such as an application filter), since the system was started.
C64 jnxWxSysStatsPktsPtFilter	1.3.6.1.4.1.8239.2.2.1.2.4.9	Counter64	read-only	Total number of packets that passed through the WX Compression Engine due to a manually configured filter (such as an application filter), since the system was started.
C64 jnxWxSysStatsBytesOfPt	1.3.6.1.4.1.8239.2.2.1.2.4.10	Counter64	read-only	Total number of bytes that passed through the WX Compression Engine due to device buffer overflow, since the system was started.
C64 jnxWxSysStatsPktsOfPt	1.3.6.1.4.1.8239.2.2.1.2.4.11	Counter64	read-only	Total number of packets that passed through the WX Compression Engine due to device buffer overflow, since the system was started.
C64 jnxWxSysStatsBytesTpIn	1.3.6.1.4.1.8239.2.2.1.2.4.12	Counter64	read-only	The number of bytes into the WX Compression Engine at the peak five-second interval of data input, since the system was started.
C64 jnxWxSysStatsPktsTpIn	1.3.6.1.4.1.8239.2.2.1.2.4.13	Counter64	read-only	The number of packets into the WX Compression Engine at the peak five-second interval of data input, since the system was started.
C64 jnxWxSysStatsBytesTpOut	1.3.6.1.4.1.8239.2.2.1.2.4.14	Counter64	read-only	The number of bytes out of the WX Compression Engine at the peak five-second interval of data input, since the system was started.
C64 jnxWxSysStatsPktsTpOut	1.3.6.1.4.1.8239.2.2.1.2.4.15	Counter64	read-only	The number of packets out of the WX Compression Engine at the peak five-second interval of data input, since the system was started.
C64 jnxWxSysStatsBytesTpPt	1.3.6.1.4.1.8239.2.2.1.2.4.16	Counter64	read-only	The number of bytes that passed through the WX Compression Engine at the peak five-second interval of data input, since the system was started.
C64 jnxWxSysStatsPktsTpPt	1.3.6.1.4.1.8239.2.2.1.2.4.17	Counter64	read-only	The number of packets that passed through the WX Compression Engine at the peak five-second interval of data input, since the system was started.
U32 jnxWxSysStatsPeakRdn	1.3.6.1.4.1.8239.2.2.1.2.4.18	Unsigned32	read-only	The maximum data reduction rate for a five second interval in the last minute. The value returned is (percentage * 1000). Applications should divide the returned value by 1000.
G32 jnxWxSysStatsThruputIn	1.3.6.1.4.1.8239.2.2.1.2.4.19	Gauge32	read-only	Average throughput of incoming data in Kbps since the system was started.
G32 jnxWxSysStatsThruputOut	1.3.6.1.4.1.8239.2.2.1.2.4.20	Gauge32	read-only	Average throughput of outgoing data in Kbps since the system was started.
C64 jnxWxSysStatsBytesInRe	1.3.6.1.4.1.8239.2.2.1.2.4.21	Counter64	read-only	Total number of bytes that entered the WX Compression Engine since the system was started.
C64 jnxWxSysStatsBytesOutRe	1.3.6.1.4.1.8239.2.2.1.2.4.22	Counter64	read-only	Total number of bytes that exited the WX Compression Engine after reduction since the system was started.
C64 jnxWxSysStatsPktsInRe	1.3.6.1.4.1.8239.2.2.1.2.4.23	Counter64	read-only	Total number of packets that entered the WX Compression Engine since the system was started.
C64 jnxWxSysStatsPktsOutRe	1.3.6.1.4.1.8239.2.2.1.2.4.24	Counter64	read-only	Total number of packets that exited the WX Compression Engine after reduction since the system was started.
C64 jnxWxSysStatsPktSizeIn1	1.3.6.1.4.1.8239.2.2.1.2.4.25	Counter64	read-only
C64 jnxWxSysStatsPktSizeIn2	1.3.6.1.4.1.8239.2.2.1.2.4.26	Counter64	read-only
C64 jnxWxSysStatsPktSizeIn3	1.3.6.1.4.1.8239.2.2.1.2.4.27	Counter64	read-only
C64 jnxWxSysStatsPktSizeIn4	1.3.6.1.4.1.8239.2.2.1.2.4.28	Counter64	read-only
C64 jnxWxSysStatsPktSizeIn5	1.3.6.1.4.1.8239.2.2.1.2.4.29	Counter64	read-only
C64 jnxWxSysStatsPktSizeIn6	1.3.6.1.4.1.8239.2.2.1.2.4.30	Counter64	read-only
C64 jnxWxSysStatsPktSizeOut1	1.3.6.1.4.1.8239.2.2.1.2.4.31	Counter64	read-only
C64 jnxWxSysStatsPktSizeOut2	1.3.6.1.4.1.8239.2.2.1.2.4.32	Counter64	read-only
C64 jnxWxSysStatsPktSizeOut3	1.3.6.1.4.1.8239.2.2.1.2.4.33	Counter64	read-only
C64 jnxWxSysStatsPktSizeOut4	1.3.6.1.4.1.8239.2.2.1.2.4.34	Counter64	read-only
C64 jnxWxSysStatsPktSizeOut5	1.3.6.1.4.1.8239.2.2.1.2.4.35	Counter64	read-only
C64 jnxWxSysStatsPktSizeOut6	1.3.6.1.4.1.8239.2.2.1.2.4.36	Counter64	read-only
jnxWxAsm	1.3.6.1.4.1.8239.2.2.1.2.5			Information maintained by a Compressor for each Decompressor it has a session with.
jnxWxAsmTable	1.3.6.1.4.1.8239.2.2.1.2.5.1		not-accessible	List of Decompressors the Compressor has sessions with.
jnxWxAsmEntry	1.3.6.1.4.1.8239.2.2.1.2.5.1.1		not-accessible	A row in jnxWxAsmTable.
I32 jnxWxAsmIndex	1.3.6.1.4.1.8239.2.2.1.2.5.1.1.1	Integer32	not-accessible	This row's number, with range (1..jnxWxStatsAsmCount).
IP jnxWxAsmIpAddress	1.3.6.1.4.1.8239.2.2.1.2.5.1.1.2	IpAddress	read-only	The IP address of the Decompressor.
jnxWxAsmStatsTable	1.3.6.1.4.1.8239.2.2.1.2.5.2		not-accessible	Statistics maintained by a Compressor for each Decompressor it has a session with.
jnxWxAsmStatsEntry	1.3.6.1.4.1.8239.2.2.1.2.5.2.1		not-accessible	A row in jnxWxAsmStatsTable.
C64 jnxWxAsmStatsPktsIn	1.3.6.1.4.1.8239.2.2.1.2.5.2.1.1	Counter64	read-only	The total number of packets into this WX, since the system was started, that were identified for reduction and addressed to the WX whose IP address is in the row in jnxWxAsmTable that matches this row.
C64 jnxWxAsmStatsPktsOut	1.3.6.1.4.1.8239.2.2.1.2.5.2.1.2	Counter64	read-only	The total number of packets out of this WX, since the system was started, that were identified for reduction and addressed to the WX whose IP address is in the row in jnxWxAsmTable that matches this row.
C64 jnxWxAsmStatsBytesIn	1.3.6.1.4.1.8239.2.2.1.2.5.2.1.3	Counter64	read-only	The total number of bytes into this WX, since the system was started, that were identified for reduction and addressed to the WX whose IP address is in the row in jnxWxAsmTable that matches this row.
C64 jnxWxAsmStatsBytesOut	1.3.6.1.4.1.8239.2.2.1.2.5.2.1.4	Counter64	read-only	The total number of bytes out of this WX, since the system was started, that were identified for reduction and addressed to the WX whose IP address is in the row in jnxWxAsmTable that matches this row.
jnxWxVirtEndptTable	1.3.6.1.4.1.8239.2.2.1.2.5.3		not-accessible	Virtual Endpoints defined in this WX
jnxWxVirtEndptEntry	1.3.6.1.4.1.8239.2.2.1.2.5.3.1		not-accessible	A row in jnxWxVirtEndptTable.
I32 jnxWxVirtEndptIndex	1.3.6.1.4.1.8239.2.2.1.2.5.3.1.1	Integer32	not-accessible	A row's number, with range (1..jnxWxStatsVirtEndptCount)
TCA jnxWxVirtEndptName	1.3.6.1.4.1.8239.2.2.1.2.5.3.1.2	TcAppName	read-only	The name of the configured virtual endpoint
I32 jnxWxVirtEndptSubnetCount	1.3.6.1.4.1.8239.2.2.1.2.5.3.1.3	Integer32	read-only	The number of subnets associated with this virtual endpoint
jnxWxApp	1.3.6.1.4.1.8239.2.2.1.2.6			Information maintained by a Compressor for each application that is monitored.
jnxWxAppTable	1.3.6.1.4.1.8239.2.2.1.2.6.1		not-accessible	List of applications currently monitored.
jnxWxAppEntry	1.3.6.1.4.1.8239.2.2.1.2.6.1.1		not-accessible	A row in jnxWxAppTable.
I32 jnxWxAppIndex	1.3.6.1.4.1.8239.2.2.1.2.6.1.1.1	Integer32	not-accessible	This row's number, with range (1..jnxWxStatsAppCount).
TCA jnxWxAppAppName	1.3.6.1.4.1.8239.2.2.1.2.6.1.1.2	TcAppName	read-only	The name of the application from which the data was received (e.g., FTP, HTTP, Lotus Notes).
jnxWxAppStatsTable	1.3.6.1.4.1.8239.2.2.1.2.6.2		not-accessible	Statistics maintained by a Compressor for each application that is monitored.
jnxWxAppStatsEntry	1.3.6.1.4.1.8239.2.2.1.2.6.2.1		not-accessible	A row in jnxWxAppStatsTable. Note that the indices are from jnxWxAsmTable and jnxWxAppTable. For each Decompressor this compressor has a session with (indexed by jnxWxAsmIndex), statistics are maintained for each application that is monitored (indexed by jnxWxAppIndex).
C64 jnxWxAppStatsBytesIn	1.3.6.1.4.1.8239.2.2.1.2.6.2.1.1	Counter64	read-only	The total number of bytes into the WX, since the system was started, that were identified for reduction, and addressed to the WX whose IP address is in the row in jnxWxAsmTable that matches the index jnxWxAsmIndex, and that was received from the application whose name is in the row in jnxWxAppTable that matches the index jnxWxAppIndex.
C64 jnxWxAppStatsBytesOut	1.3.6.1.4.1.8239.2.2.1.2.6.2.1.2	Counter64	read-only	The total number of bytes out of the WX, since the system was started, that were identified for reduction, and addressed to the WX whose IP address is in the row in jnxWxAsmTable that matches the index jnxWxAsmIndex, and that was received from the application whose name is in the row in jnxWxAppTable.
G32 jnxWxAppStatsBytesInPercent	1.3.6.1.4.1.8239.2.2.1.2.6.2.1.3	Gauge32	read-only	The percentage of the bytes in for this application over the total bytes into the WX, since the system was started, that were identified for reduction, and addressed to the WX whose IP address is in the row in jnxWxAsmTable that matches the index jnxWxAsmIndex, and that was received from the application whose name is in the row in jnxWxAppTable that matches the index jnxWxAppIndex. The value returned is (percentage * 1000). Applications should divide the returned value by 1000.
TCA jnxWxAppStatsAppName	1.3.6.1.4.1.8239.2.2.1.2.6.2.1.4	TcAppName	read-only	The name of the application from which the data was received (e.g., FTP, HTTP, Lotus Notes). NOTE: This object is here even though it's also in jnxWxAppTable. This is for the convenience of network monitoring tools that require all columns to be from the same table.
C64 jnxWxAppStatsAccelBytesIn	1.3.6.1.4.1.8239.2.2.1.2.6.2.1.5	Counter64	read-only
C64 jnxWxAppStatsActiveSessionTime	1.3.6.1.4.1.8239.2.2.1.2.6.2.1.6	Counter64	read-only
C64 jnxWxAppStatsEstBoostBytes	1.3.6.1.4.1.8239.2.2.1.2.6.2.1.7	Counter64	read-only
C64 jnxWxAppStatsBytesOutWxc	1.3.6.1.4.1.8239.2.2.1.2.6.2.1.8	Counter64	read-only
jnxWxAppAggrStatsTable	1.3.6.1.4.1.8239.2.2.1.2.6.3		not-accessible	Aggregate statistics maintained by a Compressor for each application that is monitored. These statistics apply to the compressor as a whole and are summed over all decompressor sessions maintained by the compressor.
jnxWxAppAggrStatsEntry	1.3.6.1.4.1.8239.2.2.1.2.6.3.1		not-accessible	A row in jnxWxAppAggrStatsTable.
C64 jnxWxAppAggrStatsBytesInRe	1.3.6.1.4.1.8239.2.2.1.2.6.3.1.1	Counter64	read-only	Total number of bytes that entered the WX Compression Engine for this application since the system was started.
C64 jnxWxAppAggrStatsBytesOutRe	1.3.6.1.4.1.8239.2.2.1.2.6.3.1.2	Counter64	read-only	Total number of bytes that exited the WX Compression Engine after reduction for this application since the system was started.
G32 jnxWxAppAggrStatsBytesInPercent	1.3.6.1.4.1.8239.2.2.1.2.6.3.1.3	Gauge32	read-only	The percentage of the bytes in for this application over the total bytes into the WX Compression Engine. The value returned is (percentage * 1000). Applications should divide the returned value by 1000.
jnxWxWanStatsTable	1.3.6.1.4.1.8239.2.2.1.2.6.4		not-accessible	Per application WAN performance statistics
jnxWxWanStatsEntry	1.3.6.1.4.1.8239.2.2.1.2.6.4.1		not-accessible	A row in jnxWxWanStatsTable. Note that the indices are from jnxWxAsmTable and jnxWxAppTable. For each Decompressor this compressor has a session with (indexed by jnxWxAsmIndex), statistics are maintained for each application that is monitored (indexed by jnxWxAppIndex).
C64 jnxWxWanStatsBytesToWan	1.3.6.1.4.1.8239.2.2.1.2.6.4.1.1	Counter64	read-only	Total number of bytes sent to the wan on a per application basis
C64 jnxWxWanStatsBytesFromWan	1.3.6.1.4.1.8239.2.2.1.2.6.4.1.2	Counter64	read-only	Total number of bytes received from the WAN on a per application basis
jnxWxAccelAppNameTable	1.3.6.1.4.1.8239.2.2.1.2.6.5		not-accessible	List of applications that can be accelerated by the WX device.
jnxWxAccelAppNameEntry	1.3.6.1.4.1.8239.2.2.1.2.6.5.1		not-accessible	A row in jnxWxAccelAppNameTable. Each row contains the name of an application that can be accelerated.
I32 jnxWxAccelAppIndex	1.3.6.1.4.1.8239.2.2.1.2.6.5.1.1	Integer32	not-accessible	This row's number, with range (1..jnxWxStatsAccelAppCount).
TCA jnxWxAccelAppName	1.3.6.1.4.1.8239.2.2.1.2.6.5.1.2	TcAppName	read-only	The name of the application from which the data was received (e.g., FTP, HTTP, Lotus Notes).
jnxWxAccelAppStatsTable	1.3.6.1.4.1.8239.2.2.1.2.6.6		not-accessible	Accelerated application performance statistics. Includes time with and without acceleration in seconds
jnxWxAccelAppStatsEntry	1.3.6.1.4.1.8239.2.2.1.2.6.6.1		not-accessible	A row in jnxWxAccelAppStatsTable. Indices are from jnxWxAsmTable and jnxWxAccelAppNameTable. For each Decompressor this compressor has a session with (indexed by jnxWxAsmIndex), statistics are maintained for each application that is accelereated (indexed by jnxWxAccelAppIndex)
U32 jnxWxAccelAppTimeWithAccel	1.3.6.1.4.1.8239.2.2.1.2.6.6.1.3	Unsigned32	read-only	Total number of seconds required to complete all transactions with acceleration enabled.
U32 jnxWxAccelAppTimeWithoutAccel	1.3.6.1.4.1.8239.2.2.1.2.6.6.1.4	Unsigned32	read-only	Total number of seconds that would be required to complete all transactions if acceleration was disabled.
jnxWxBurstStats	1.3.6.1.4.1.8239.2.2.1.2.7			Sub-tree for WAN Acceleration system statistics.
I32 jnxWxBurstStatsStartTime	1.3.6.1.4.1.8239.2.2.1.2.7.1	Integer32	read-only	The start of the minute in seconds since midnight (00:00:00), January 1, 1970, UTC over which the burst stats apply.
G32 jnxWxBurstStatsBpsIn	1.3.6.1.4.1.8239.2.2.1.2.7.2	Gauge32	read-only	Burst bits per second into reduction engine for the past minute.
G32 jnxWxBurstStatsBpsOut	1.3.6.1.4.1.8239.2.2.1.2.7.3	Gauge32	read-only	Burst bits per second out of reduction engine for the past minute.
G32 jnxWxBurstStatsBpsPt	1.3.6.1.4.1.8239.2.2.1.2.7.4	Gauge32	read-only	Burst pass-through bits per second for the past minute.
I32 jnxWxStatsAccelAppCount	1.3.6.1.4.1.8239.2.2.1.2.8	Integer32	read-only	The number of applications currently being accelerated on this Compressor.
I32 jnxWxStatsVirtEndptCountEx	1.3.6.1.4.1.8239.2.2.1.2.9	Integer32	read-only	The number of virtual endpoints configured on this WX
jnxWxQos	1.3.6.1.4.1.8239.2.2.1.2.10			Information maintained by a Compressor for each QoS class that is monitored.
jnxWxQosEndptTable	1.3.6.1.4.1.8239.2.2.1.2.10.1		not-accessible	List of endpoints managed by QoS.
jnxWxQosEndptEntry	1.3.6.1.4.1.8239.2.2.1.2.10.1.1		not-accessible	A row in jnxWxQosEndptTable.
I32 jnxWxQosEndptIndex	1.3.6.1.4.1.8239.2.2.1.2.10.1.1.1	Integer32	not-accessible	This row's number, with range (1..jnxWxStatsQosEndptCount).
OID jnxWxQosEndptIdentifier	1.3.6.1.4.1.8239.2.2.1.2.10.1.1.2	TcQosIdentifier	read-only	The IP address of an Decompressor or the name of a virtual endpoint.
jnxWxQosClassTable	1.3.6.1.4.1.8239.2.2.1.2.10.2		not-accessible	List of QoS classes currently monitored.
jnxWxQosClassEntry	1.3.6.1.4.1.8239.2.2.1.2.10.2.1		not-accessible	A row in the jnxWxQosClassTable
I32 jnxWxQosClassIndex	1.3.6.1.4.1.8239.2.2.1.2.10.2.1.1	Integer32	not-accessible	This row's number, with range (1..jnxWxStatsQosClassCount).
OID jnxWxQosClassName	1.3.6.1.4.1.8239.2.2.1.2.10.2.1.2	TcQosIdentifier	read-only	The name of the QoS class
jnxWxQosStatsTable	1.3.6.1.4.1.8239.2.2.1.2.10.3		not-accessible	Per class QoS performance statistics
jnxWxQosStatsEntry	1.3.6.1.4.1.8239.2.2.1.2.10.3.1		not-accessible	A row in the jnxWxQosStatsTable. Indexed by decompressor and the corresponding QoS class. Statistics are maintained per endpoint (indexed by jnxWxQosEndptIndex) and per QoS class associated with the endpoint (indexed by jnxWxQosClassIndex)
C64 jnxWxQosStatsBytesIn	1.3.6.1.4.1.8239.2.2.1.2.10.3.1.3	Counter64	read-only	Total number of bytes received from the WAN on a per class basis
C64 jnxWxQosStatsBytesOut	1.3.6.1.4.1.8239.2.2.1.2.10.3.1.4	Counter64	read-only	Total number of bytes sent to the WAN on a per class basis
C64 jnxWxQosStatsBytesDropped	1.3.6.1.4.1.8239.2.2.1.2.10.3.1.5	Counter64	read-only	Total number of bytes dropped on a per class basis
C64 jnxWxQosStatsPktsIn	1.3.6.1.4.1.8239.2.2.1.2.10.3.1.6	Counter64	read-only	Total number of packets received from the WAN on a per class basis
C64 jnxWxQosStatsPktsOut	1.3.6.1.4.1.8239.2.2.1.2.10.3.1.7	Counter64	read-only	Total number of packets sent to the wan on a per class basis
C64 jnxWxQosStatsPktsDropped	1.3.6.1.4.1.8239.2.2.1.2.10.3.1.8	Counter64	read-only	Total number of packets dropped on a per class basis
I32 jnxWxStatsQosClassCount	1.3.6.1.4.1.8239.2.2.1.2.11	Integer32	read-only	The number of QoS classes currently being monitored on this Compressor.
I32 jnxWxStatsQosEndptCount	1.3.6.1.4.1.8239.2.2.1.2.12	Integer32	read-only	The number of QoS endpoints currently being monitored on this Compressor.
I32 jnxWxStatsWpEndptCount	1.3.6.1.4.1.8239.2.2.1.2.13	Integer32	read-only	Number of endpoints with WAN performance monitoring enabled
jnxWxWanPerf	1.3.6.1.4.1.8239.2.2.1.2.14
jnxWxWpEndptTable	1.3.6.1.4.1.8239.2.2.1.2.14.1		not-accessible	List of endpoints managed by Multi-path
jnxWxWpEndptEntry	1.3.6.1.4.1.8239.2.2.1.2.14.1.1		not-accessible
I32 jnxWxWpEndptIndex	1.3.6.1.4.1.8239.2.2.1.2.14.1.1.1	Integer32	not-accessible
IP jnxWxWpEndptIp	1.3.6.1.4.1.8239.2.2.1.2.14.1.1.2	IpAddress	read-only
jnxWxWpStatsTable	1.3.6.1.4.1.8239.2.2.1.2.14.2		not-accessible
jnxWxWpStatsEntry	1.3.6.1.4.1.8239.2.2.1.2.14.2.1		not-accessible
U32 jnxWxWpStatsLatencyThresh	1.3.6.1.4.1.8239.2.2.1.2.14.2.1.3	Unsigned32	read-only
U32 jnxWxWpStatsAvgLatency	1.3.6.1.4.1.8239.2.2.1.2.14.2.1.4	Unsigned32	read-only
U32 jnxWxWpStatsLatencyCount	1.3.6.1.4.1.8239.2.2.1.2.14.2.1.5	Unsigned32	read-only
U32 jnxWxWpStatsLatencyAboveThresh	1.3.6.1.4.1.8239.2.2.1.2.14.2.1.6	Unsigned32	read-only
U32 jnxWxWpStatsLatencyAboveThreshCount	1.3.6.1.4.1.8239.2.2.1.2.14.2.1.7	Unsigned32	read-only
U32 jnxWxWpStatsLossPercent	1.3.6.1.4.1.8239.2.2.1.2.14.2.1.8	Unsigned32	read-only
U32 jnxWxWpStatsLossCount	1.3.6.1.4.1.8239.2.2.1.2.14.2.1.9	Unsigned32	read-only
U32 jnxWxWpStatsEventCount	1.3.6.1.4.1.8239.2.2.1.2.14.2.1.10	Unsigned32	read-only
U32 jnxWxWpStatsDiversionCount	1.3.6.1.4.1.8239.2.2.1.2.14.2.1.11	Unsigned32	read-only
U32 jnxWxWpStatsReturnCount	1.3.6.1.4.1.8239.2.2.1.2.14.2.1.12	Unsigned32	read-only
U32 jnxWxWpStatsLastDown	1.3.6.1.4.1.8239.2.2.1.2.14.2.1.13	Unsigned32	read-only
U32 jnxWxWpStatsUnavailableCount	1.3.6.1.4.1.8239.2.2.1.2.14.2.1.14	Unsigned32	read-only
U32 jnxWxWpStatsMinuteCount	1.3.6.1.4.1.8239.2.2.1.2.14.2.1.15	Unsigned32	read-only
jnxWxEvents	1.3.6.1.4.1.8239.2.2.1.3			Sub-tree for WAN Acceleration MIB events.
jnxWxEventObjs	1.3.6.1.4.1.8239.2.2.1.3.1			Branch for objects meant only to be sent in event varbinds.
jnxWxEventEvents	1.3.6.1.4.1.8239.2.2.1.3.2			Branch for the events themselves.
jnxWxEventEventsV2	1.3.6.1.4.1.8239.2.2.1.3.2.0			Branch for SNMPv2 events. The OIDs for SNMPv2 events should have a zero as the next-to-last sub-identifier (as specified in RFC1902).
NTF jnxWxEventRipAuthFailure	1.3.6.1.4.1.8239.2.2.1.3.2.0.1			RIP authentication failure
NTF jnxWxEventCompressionBufferOverflow	1.3.6.1.4.1.8239.2.2.1.3.2.0.2			The compressor's input buffer is approaching full capacity. This trap is currently unused.
NTF jnxWxEventCompressionSessionClosed	1.3.6.1.4.1.8239.2.2.1.3.2.0.3			The compressor's session to the device described in jnxWxCommonEventDescr was terminated.
NTF jnxWxEventDecompressionSessionClosed	1.3.6.1.4.1.8239.2.2.1.3.2.0.4			The decompressor's session to the device described in jnxWxCommonEventDescr was terminated.
NTF jnxWxEventCompressionSessionOpened	1.3.6.1.4.1.8239.2.2.1.3.2.0.5			The compressor's session to the device described in jnxWxCommonEventDescr was opened.
NTF jnxWxEventDecompressionSessionOpened	1.3.6.1.4.1.8239.2.2.1.3.2.0.6			The decompressor's session to the device described in jnxWxCommonEventDescr was opened.
NTF jnxWxEventPrimaryRegServerUnreachable	1.3.6.1.4.1.8239.2.2.1.3.2.0.7			The primary registration server is currently unreachable.
NTF jnxWxEventSecondaryRegServerUnreachable	1.3.6.1.4.1.8239.2.2.1.3.2.0.8			The secondary registration server is currently unreachable.
NTF jnxWxEventMultiNodeMasterUp	1.3.6.1.4.1.8239.2.2.1.3.2.0.9			The system designated as the 'master' of a multi-node came up. This notification is generated by the system that's designated as the 'master' of the multi-node. Note that the corresponding Down notification is generated by the designated 'master-backup' of the same multi-node. This trap is currently unused.
NTF jnxWxEventMultiNodeMasterDown	1.3.6.1.4.1.8239.2.2.1.3.2.0.10			The system designated as the 'master' of a multi-node is currently down. This notification is generated by the system that's designated as the 'master-backup' of the same multi-node. Note that the corresponding Up notification is generated by the designated 'master' of the same multi-node. This trap is currently unused.
NTF jnxWxEventMultiNodeLastUp	1.3.6.1.4.1.8239.2.2.1.3.2.0.11			The system designated as the 'last-node' of a multi-node came up. This notification is generated by the system that's designated as the 'last-node' of the multi-node. Note that the corresponding Down notification is generated by the designated 'master' of the same multi-node. This trap is currently unused.
NTF jnxWxEventMultiNodeLastDown	1.3.6.1.4.1.8239.2.2.1.3.2.0.12			The system designated as the 'last-node' of a multi-node is currently down. This notification is generated by the system that's designated as the 'master' of the same multi-node. Note that the corresponding Up notification is generated by the designated 'last-node' of the same multi-node. This trap is currently unused.
NTF jnxWxEventPrimaryDownBackupEngaged	1.3.6.1.4.1.8239.2.2.1.3.2.0.13			The system designated as the 'primary' is currently unreachable. This notification is generated by the system that's designated as the 'backup' device. The backup device is engaged for the primary device.
NTF jnxWxEventPrimaryDownBackupEngageFailed	1.3.6.1.4.1.8239.2.2.1.3.2.0.14			The system designated as the 'primary' is currently unreachable. This notification is generated by the system that's designated as the 'backup' device. The backup device failed to engage for the primary device.
NTF jnxWxEventPrimaryUpBackupDisengaged	1.3.6.1.4.1.8239.2.2.1.3.2.0.15			The system designated as the 'primary' is currently reachable. This notification is generated by the system that's designated as the 'backup' device. The backup device has disengaged itself.
NTF jnxWxEventMultiPathStatusChange	1.3.6.1.4.1.8239.2.2.1.3.2.0.16			The status of the primary or secondary path to another multi-path enabled system changed. The path became inactive or failed after previously being active or vice versa. This might have caused traffic designated to flow over this path to be switched from or to this path.
NTF jnxWxEventDiskFailure	1.3.6.1.4.1.8239.2.2.1.3.2.0.17			A hard disk failed on the system. The system was rebooted, and will now operate without the downed disk, at a degraded performance. Dictionary accumulated until this point was lost.
NTF jnxWxEventWanPerfStatusChange	1.3.6.1.4.1.8239.2.2.1.3.2.0.18			The status of the Path on which WAN Performance Monitoring is enabled has changed. The performance of the path has changed either from acceptable to unacceptable or vice versa.
NTF jnxWxEventDCQAboveHiWatermark	1.3.6.1.4.1.8239.2.2.1.3.2.0.19			The decompression queue has reached the high watermark.
NTF jnxWxEventDCQBelowHiWatermark	1.3.6.1.4.1.8239.2.2.1.3.2.0.20			The decompression queue has fallen below the high watermark.
NTF jnxWxEventPerformanceThreshCrossed	1.3.6.1.4.1.8239.2.2.1.3.2.0.21			The threshold for a configured perfromance event has been crossed. This notification indicates that some system parameter being measured has reached a critical value.
NTF jnxWxEventClientLinkDown	1.3.6.1.4.1.8239.2.2.1.3.2.0.22			Link to the Client went down.
NTF jnxWxEventClientLinkUp	1.3.6.1.4.1.8239.2.2.1.3.2.0.23			Link to the client came up.

RFC description

Juniper vendor-private MIB for managing WX (Wide Area Virtualization) platform systems and services.

Start monitoring Juniper WX Series WAN acceleration appliance (primary managed objects) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download JUNIPER-WX-MIB