Juniper-RADIUS-Proxy-MIB

All MIBs › Juniper-RADIUS-Proxy-MIB

Organization: Juniper Networks, Inc.

Last Updated: 2004-01-23

Category: Protocol: RADIUS, RADIUS and AAA, Vendor: Juniper

Description: Juniper Networks MIB for monitoring RADIUS proxy server operations and request forwarding on Juniper E-series platforms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Juniper-RADIUS-Proxy-MIB?

Juniper-RADIUS-Proxy-MIB is a Juniper Networks enterprise MIB for configuring the RADIUS proxy function on JUNOSe E-series routers, where the router relays authentication and accounting RADIUS traffic between NAS clients and back-end AAA servers. It exposes proxy UDP port configuration, separate client tables for authentication and accounting proxying (address, mask, shared key, row status), and UDP checksum handling. Its monitoring role is largely software/service-availability verification: confirming a client subnet's proxy entry is active and correctly keyed helps diagnose why RADIUS requests from a given client are being silently dropped or rejected, a configuration/software issue rather than a hardware fault. It works alongside standard RADIUS MIBs and Juniper's other RADIUS-related enterprise MIBs on the same platform. It is typically deployed on broadband/edge access routers acting as a RADIUS proxy between subscriber-facing clients and centralized AAA infrastructure. Engineers can download the Juniper-RADIUS-Proxy-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Juniper-RADIUS-Proxy-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Juniper E-series router (JUNOSe broadband/edge access platform)

Monitoring Examples

An operator can inspect juniRadiusAuthProxyCfgClientTable entries (juniRadiusAuthProxyCfgClientAddress, juniRadiusAuthProxyCfgClientMask, juniRadiusAuthProxyCfgRowStatus) to confirm a client subnet is active for auth proxying on juniRadiusAuthProxyCfgPortNumber, and check juniRadiusAcctProxyCfgClientTable and juniRadiusAcctProxyCfgPortNumber similarly for accounting proxy reachability. An inactive row status or mismatched proxy key would explain silently dropped RADIUS traffic from that client.

What Can Be Monitored

auth/accounting proxy port numbers
configured proxy client addresses/masks
proxy client row status
shared key configuration
UDP checksum handling

Imported Objects

From Juniper-MIBs

juniMibs

MODULE-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
RowStatus
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
juniRadiusProxyMIB	1.3.6.1.4.1.4874.2.2.73			The RADIUS Proxy MIB for the Juniper Networks enterprise.
juniRadiusProxyObjects	1.3.6.1.4.1.4874.2.2.73.1
juniRadiusGeneralProxy	1.3.6.1.4.1.4874.2.2.73.1.1
T/F juniRadiusProxyUdpChecksum	1.3.6.1.4.1.4874.2.2.73.1.1.1	TruthValue	read-write	Enables/disables the checksum calculations on RADIUS UDP packets.
juniRadiusAuthProxyCfg	1.3.6.1.4.1.4874.2.2.73.1.2
I32 juniRadiusAuthProxyCfgPortNumber	1.3.6.1.4.1.4874.2.2.73.1.2.1	Integer32	read-write	The UDP port the RADIUS authentication proxy server will use. The server will first be created, if necessary. A value of 0 indicates the server should be deleted.
juniRadiusAuthProxyCfgClientTable	1.3.6.1.4.1.4874.2.2.73.1.2.2		not-accessible	The table listing the clients with which the RADIUS authentication proxy server shares a secret.
juniRadiusAuthProxyCfgClientEntry	1.3.6.1.4.1.4874.2.2.73.1.2.2.1		not-accessible	An entry (row) representing clients with which the RADIUS authentication proxy server shares a secret.
IP juniRadiusAuthProxyCfgClientAddress	1.3.6.1.4.1.4874.2.2.73.1.2.2.1.1	IpAddress	not-accessible	The IP Network Address of the RADIUS authentication proxy server's clients.
IP juniRadiusAuthProxyCfgClientMask	1.3.6.1.4.1.4874.2.2.73.1.2.2.1.2	IpAddress	not-accessible	The IP Network Address Mask of the RADIUS authentication proxy server's clients.
ROW juniRadiusAuthProxyCfgRowStatus	1.3.6.1.4.1.4874.2.2.73.1.2.2.1.3	RowStatus	read-create	Supports 'createAndGo' and 'destroy' only.
STR juniRadiusAuthProxyCfgClientKey	1.3.6.1.4.1.4874.2.2.73.1.2.2.1.4	DisplayString	read-create	The secret (RADIUS authenticator) used by the clients during exchanges with this authentication proxy server.
juniRadiusAcctProxyCfg	1.3.6.1.4.1.4874.2.2.73.1.3
I32 juniRadiusAcctProxyCfgPortNumber	1.3.6.1.4.1.4874.2.2.73.1.3.1	Integer32	read-write	The UDP port the RADIUS accounting proxy server will use. The server will first be created, if necessary. A value of 0 indicates the server should be deleted.
juniRadiusAcctProxyCfgClientTable	1.3.6.1.4.1.4874.2.2.73.1.3.2		not-accessible	The table listing the clients with which the RADIUS accounting proxy server shares a secret.
juniRadiusAcctProxyCfgClientEntry	1.3.6.1.4.1.4874.2.2.73.1.3.2.1		not-accessible	An entry (row) representing clients with which the RADIUS accounting proxy server shares a secret.
IP juniRadiusAcctProxyCfgClientAddress	1.3.6.1.4.1.4874.2.2.73.1.3.2.1.1	IpAddress	not-accessible	The IP Network Address of the RADIUS accounting proxy server's clients.
IP juniRadiusAcctProxyCfgClientMask	1.3.6.1.4.1.4874.2.2.73.1.3.2.1.2	IpAddress	not-accessible	The IP Network Address Mask of the RADIUS accounting proxy server's clients.
ROW juniRadiusAcctProxyCfgRowStatus	1.3.6.1.4.1.4874.2.2.73.1.3.2.1.3	RowStatus	read-create	Supports 'createAndGo' and 'destroy' only.
STR juniRadiusAcctProxyCfgClientKey	1.3.6.1.4.1.4874.2.2.73.1.3.2.1.4	DisplayString	read-create	The secret (RADIUS authenticator) used by the clients during exchanges with this accounting proxy server.
juniRadiusProxyMIBConformance	1.3.6.1.4.1.4874.2.2.73.2
juniRadiusProxyMIBCompliances	1.3.6.1.4.1.4874.2.2.73.2.1
juniRadiusProxyCompliance	1.3.6.1.4.1.4874.2.2.73.2.1.1			The compliance statement for entities implementing the JUNOSe RADIUS Proxy Server MIB functionality.
juniRadiusProxyMIBGroups	1.3.6.1.4.1.4874.2.2.73.2.2
juniRadiusBasicProxyGroup	1.3.6.1.4.1.4874.2.2.73.2.2.1			A collection of objects providing basic management of RADIUS Proxy Servers.
juniRadiusAuthProxyGroup	1.3.6.1.4.1.4874.2.2.73.2.2.2			A collection of objects providing management of RADIUS Authentication Proxy Servers.
juniRadiusAcctProxyGroup	1.3.6.1.4.1.4874.2.2.73.2.2.3			A collection of objects providing management of RADIUS Accounting Proxy Servers.

RFC description

Configures RADIUS authentication and accounting proxy servers for Juniper network device user access.

Start monitoring Juniper E-series router, JUNOSe broadband/edge platform (RADIUS proxy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Juniper-RADIUS-Proxy-MIB

What Is Juniper-RADIUS-Proxy-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description