All MIBs › Juniper-PPP-MIB
Organization: Juniper Networks, Inc.
Last Updated: 2010-02-09
Category: Protocol: PPP, Vendor: Juniper
Description: MIB from Juniper Networks covering PPP link parameters, authentication, and connection statistics management on E-series routers.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is Juniper-PPP-MIB?
Juniper-PPP-MIB is a Juniper Networks enterprise MIB for managing Point-to-Point Protocol (PPP) links on Juniper E-series routers, covering link status, LCP (Link Control Protocol) negotiation outcomes, keepalive exchange, and authentication parameters. It exposes per-link status and counters as well as configuration-related objects for PPP/LCP and security aspects of the connection. Its monitoring focus is on link/connection health: tracking keepalive request/reply counts and failures, magic numbers, and termination reason/negotiation-failure options lets an operator detect a flapping or failing PPP link before it drops entirely, while local authentication settings help diagnose authentication-related session failures. It is a Juniper-specific extension of the general PPP concepts standardized in IETF's PPP MIBs. It is deployed on Juniper E-series routers used for WAN/dial-up or leased-line PPP connectivity. Engineers can download the Juniper-PPP-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in Juniper-PPP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Juniper Networks E-series routers
Monitoring Examples
Polling juniPppLinkStatusTable (via juniPppLinkStatusEntry) fields like juniPppLinkStatusInKeepaliveRequests, juniPppLinkStatusOutKeepaliveRequests, and juniPppLinkStatusKeepaliveFailures reveals whether a PPP link is exchanging keepalives normally or accumulating failures that precede a link drop. When a link does go down, juniPppLinkStatusTerminateReason and juniPppLinkStatusTerminateNegFailOption indicate why, while juniPppLinkStatusLocalMagicNumber/juniPppLinkStatusRemoteMagicNumber help detect looped-back links.
What Can Be Monitored
- PPP link status
- keepalive requests/replies and failures
- link termination reason
- LCP negotiation failure option
- local/remote magic numbers
- local authentication method
This MIB depends on
Related MIBs
Imported Objects
From IF-MIB
| InterfaceIndex | |
| InterfaceIndexOrZero | |
| ifIndex | OBJECT-TYPE |
From IPV6-TC
| Ipv6AddressIfIdentifier |
From Juniper-MIBs
| juniMibs | MODULE-IDENTITY |
From Juniper-TC
| JuniEnable | |
| JuniName | |
| JuniNextIfIndex | |
| JuniNibbleConfig |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| TimeTicks |
From SNMPv2-TC
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TruthValue |
How to Use in IPNetwork Monitor
Example using juniPppLinkStatusInKeepaliveRequests OID:
Select a Juniper Networks E-series router (PPP link/LCP/keepalive status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type juniPppLinkStatusInKeepaliveRequests into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the number of keepalive requests received. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| juniPppMIB | 1.3.6.1.4.1.4874.2.2.11 | The Point-to-Point Protocol (PPP) MIB for the Juniper enterprise. | ||
| juniPppObjects | 1.3.6.1.4.1.4874.2.2.11.1 | |||
| juniPppLcp | 1.3.6.1.4.1.4874.2.2.11.1.1 | |||
| juniPppLinkStatusTable | 1.3.6.1.4.1.4874.2.2.11.1.1.1 | not-accessible | This table contains entries for PPP interfaces present in the system. | |
| juniPppLinkStatusEntry | 1.3.6.1.4.1.4874.2.2.11.1.1.1.1 | not-accessible | Each entry describes the characteristics of a PPP interface. | |
| INT juniPppLinkStatusTerminateReason | 1.3.6.1.4.1.4874.2.2.11.1.1.1.1.1 | INTEGER | read-only | Reason the PPP link was terminated: none None. other Not specified. adminDisable Interface administratively disabled. lowerLayerDown Underlying interface is down. noUpperInterface No interface above PPP. authenticationFailure Authentication failed. peerTerminated Peer initiated termination. peerRenegotiated Peer initiated renegotiation. maxRetriesExceeded Maximum number of config retries exceeded. negotiationFailure Failed to negotiate LCP option. See juniPppLinkStatusTerminateNegFailOption. keepaliveFailure Keepalive failed. sessionTimeout Maximum session period expired. inactivityTimeout Maximum inactivity period expired. addressLeaseExpired Lease for network address expired. adminLogout Session administratively terminated. tunnelFailed Associated tunnel failed. tunnelDisconnected Associated tunnel disconnected. loopback Loopback detected. |
| INT juniPppLinkStatusTerminateNegFailOption | 1.3.6.1.4.1.4874.2.2.11.1.1.1.1.2 | INTEGER | read-only | Reports the PPP LCP option for which negotiation failed, when juniPppLinkStatusTerminateReason has the value 'negotiationFailure'. |
| C32 juniPppLinkStatusInKeepaliveRequestsEx | 1.3.6.1.4.1.4874.2.2.11.1.1.1.1.3 | Counter32 | read-only | Number of keepalive requests received. |
| C32 juniPppLinkStatusOutKeepaliveRequests | 1.3.6.1.4.1.4874.2.2.11.1.1.1.1.4 | Counter32 | read-only | Number of keepalive requests transmitted. |
| C32 juniPppLinkStatusInKeepaliveReplies | 1.3.6.1.4.1.4874.2.2.11.1.1.1.1.5 | Counter32 | read-only | Number of keepalive replies received. |
| C32 juniPppLinkStatusOutKeepaliveReplies | 1.3.6.1.4.1.4874.2.2.11.1.1.1.1.6 | Counter32 | read-only | Number of keepalive replies transmitted. |
| C32 juniPppLinkStatusKeepaliveFailures | 1.3.6.1.4.1.4874.2.2.11.1.1.1.1.7 | Counter32 | read-only | Number of keepalive failures detected. |
| I32 juniPppLinkStatusLocalMagicNumber | 1.3.6.1.4.1.4874.2.2.11.1.1.1.1.8 | Integer32 | read-only | Magic number negotiated for the local side. |
| I32 juniPppLinkStatusRemoteMagicNumber | 1.3.6.1.4.1.4874.2.2.11.1.1.1.1.9 | Integer32 | read-only | Magic number negotiated for the remote side. |
| JUN juniPppLinkStatusLocalAuthentication | 1.3.6.1.4.1.4874.2.2.11.1.1.1.1.10 | JuniPppAuthentication2 | read-only | Authentication protocol negotiated for the local side. |
| NUM juniPppLinkStatusTunnelIfIndex | 1.3.6.1.4.1.4874.2.2.11.1.1.1.1.11 | InterfaceIndexOrZero | read-only | The ifIndex of an associated interface pertaining to a tunneling protocol, or zero if no such interface exists. The type of tunneling interface can be identified from information in the entries in ifTable and juniIfTable for this tunnel interface. |
| C32 juniPppLinkStatuslcpRenegoTerminates | 1.3.6.1.4.1.4874.2.2.11.1.1.1.1.12 | Counter32 | read-only | Number of times lcp terminated due to peer exceeding max renegotiation attempts. |
| juniPppLinkConfigTable | 1.3.6.1.4.1.4874.2.2.11.1.1.2 | not-accessible | This table contains entries for PPP interfaces present in the system. | |
| juniPppLinkConfigEntry | 1.3.6.1.4.1.4874.2.2.11.1.1.2.1 | not-accessible | Each entry describes the characteristics of a PPP interface. Creating/deleting entries in this table causes corresponding entries for be created/deleted in ifTable/ifXTable/juniIfTable. | |
| NUM juniPppLinkConfigIfIndex | 1.3.6.1.4.1.4874.2.2.11.1.1.2.1.1 | InterfaceIndex | not-accessible | The ifIndex of the PPP interface. When creating entries in this table, suitable values for this object are determined by reading juniPppNextIfIndex. |
| ROW juniPppLinkConfigRowStatus | 1.3.6.1.4.1.4874.2.2.11.1.1.2.1.2 | RowStatus | read-create | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: juniPppLinkConfigRowStatus juniPppLinkConfigLowerIfIndex In addition, when creating an entry the following conditions must hold: A value for juniPppLinkConfigIndex must have been determined previously, by reading juniPppNextIfIndex. The interface identified by juniPppLinkConfigLowerIfIndex must exist. A corresponding entry in ifTable/ifXTable/juniIfTable is created/ destroyed as a result of creating/destroying an entry in this table. |
| NUM juniPppLinkConfigLowerIfIndex | 1.3.6.1.4.1.4874.2.2.11.1.1.2.1.3 | InterfaceIndexOrZero | read-create | The ifIndex of an interface over which this PPP interface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a non-zero value be configured at entry creation. |
| I32 juniPppLinkConfigKeepalive | 1.3.6.1.4.1.4874.2.2.11.1.1.2.1.4 | Integer32 | read-create | Keepalive interval in seconds. A value of zero disables keepalive. Keepalive is performed using LCP Echo. |
| JUN juniPppLinkConfigAuthentication | 1.3.6.1.4.1.4874.2.2.11.1.1.2.1.5 | JuniPppAuthentication | read-create | Specifies the type(s) of authentication, if any, to be negotiated with the peer: none No authentication is negotiated. pap PAP negotiation only. chap CHAP negotiation only. papChap PAP negotiation is attempted first; if fails, attempt CHAP. chapPap CHAP negotiation is attempted first; if fails, attempt PAP. If authentication negotiation is not supported for this PPP interface, then any attempt to explicitely set this object will result in a notWritable error and it will be implicitily set to the DEFVAL on row creation. Setting this object to none(0) will set juniPppLinkConfigAuthenticatorVirtualRouter object to an empty string. This object returns a null(0) value on the get operation. New object juniPppLinkConfigAuthentication2 will reflect the configured values. Setting this object along with the juniPppLinkConfigAuthentication2 object will return an inconsistentValue error. |
| I32 juniPppLinkConfigMaxAuthenRetries | 1.3.6.1.4.1.4874.2.2.11.1.1.2.1.6 | Integer32 | read-create | The number of authentication retries permitted, in addition to a failed initial attempt. If all retries fail, the link is reset. If authentication negotiation is not supported for this PPP interface, then any attempt to explicitely set this object will result in a notWritable error and it will be implicitily set to the DEFVAL on row creation. |
| NUM juniPppLinkConfigStandardIfIndex | 1.3.6.1.4.1.4874.2.2.11.1.1.2.1.7 | InterfaceIndex | read-only | The ifIndex value for this interface in the standard PPP MIBs. The ifIndex value for PPP interfaces is not the same for both proprietary and standard MIB tables pertaining to PPP interface. Therefore this value is provide to simply cross referencing standard PPP and proprietary PPP MIB information. |
| I32 juniPppLinkConfigChapMinChallengeLength | 1.3.6.1.4.1.4874.2.2.11.1.1.2.1.8 | Integer32 | read-create | Minimum value of the CHAP authenticator challenge length value. This value is never allowed to be set to a value greater than juniPppLinkConfigChapMaxChallengeLength. |
| I32 juniPppLinkConfigChapMaxChallengeLength | 1.3.6.1.4.1.4874.2.2.11.1.1.2.1.9 | Integer32 | read-create | Maximum value of the CHAP authenticator challenge length value. This value is never allowed to be set to a value less than juniPppLinkConfigChapMinChallengeLength. |
| JUN juniPppLinkConfigPassiveMode | 1.3.6.1.4.1.4874.2.2.11.1.1.2.1.10 | JuniEnable | read-create | When enabled, LCP state machine is forced into passive mode on lower layer UP message. It adds compatibility with slow and buggy clients. |
| JUN juniPppLinkConfigAuthenticatorVirtualRouter | 1.3.6.1.4.1.4874.2.2.11.1.1.2.1.11 | JuniName | read-create | The name of the virtual router (Juniper-ROUTER-MIB.juniRouterName) to be used for authentication on the PPP interface. Setting this object statically binds the authenticating virtual router with the PPP interface. If this object is not explicitly set or it is set to null string, then this object is ignored and the virtual router used for authentication is determined by other means. On a Set operation, if the value of this object is not null and does not correspond to an existing virtual router, then an inconsistentValue error is returned. Setting this object to a non-null string returns inconsistentValue error if juniPppLinkConfigAuthentication object is none(0) or not configured. |
| JUN juniPppLinkConfigAaaProfile | 1.3.6.1.4.1.4874.2.2.11.1.1.2.1.12 | JuniName | read-create | The name of the AAA profile to be used for authentication on the PPP interface. Setting this object statically binds the AAA profile with the PPP interface. If this object is not explicitly set or it is set to null string, then this object is ignored. On a Set operation, if the value of this object is not null and does not correspond to an existing AAA profile, then an inconsistentValue error is returned. |
| JUN juniPppLinkConfigAuthentication2 | 1.3.6.1.4.1.4874.2.2.11.1.1.2.1.13 | JuniNibbleConfig | read-create | A configuration variable comprised of nibbles i.e. 4 bits, such that a client can supply a list of 0 to 8 selections. The least significant nibble is the first value of the list, and the most significant nibble is the last value. The value in each field ranges from 0 to 15, however the first nibble with value 0 indicates the end of the list. Repetition of values is not allowed. Segregation of values is not allowed. Valid Values are: none - 0 pap - 1 chap - 2 eap - 3 Example valid encoding: 0x00000321 0x00000012 Not a valid encoding: 0x00000121 0x01002001 If authentication negotiation is not supported for this PPP interface, then any attempt to explicitly set this object will result in a notWritable error and it will be implicitly set to the DEFVAL on row creation. Setting this object to null will set juniPppLinkConfigAuthenticatorVirtualRouter object to an empty string. Setting this object along with the juniPppLinkConfigAuthentication object will return an inconsistentValue error. |
| JUN juniPppLinkConfigIgnoreMagicNumberMismatch | 1.3.6.1.4.1.4874.2.2.11.1.1.2.1.14 | JuniEnable | read-create | The ignore magic number mismatch option of the PPP interface determines the action to be taken, when the peer has not negotiated any value yet sent null or invalid magic number in the LCP echo packets. The two actions that can be configured are: 1) Ignore the mismatch and retain connection 2) Disallow the mismatch and terminate connection |
| I32 juniPppLinkConfigMaxLcpRenegotiation | 1.3.6.1.4.1.4874.2.2.11.1.1.2.1.15 | Integer32 | read-create | Maximum number of allowed lcp renegotiation attempts from peer. |
| JUN juniPppNextIfIndex | 1.3.6.1.4.1.4874.2.2.11.1.1.3 | JuniNextIfIndex | read-only | Coordinate ifIndex value allocation for entries in the juniPppLinkConfigTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously. |
| juniPppSec | 1.3.6.1.4.1.4874.2.2.11.1.2 | |||
| juniPppIp | 1.3.6.1.4.1.4874.2.2.11.1.3 | |||
| juniPppIpTable | 1.3.6.1.4.1.4874.2.2.11.1.3.1 | not-accessible | Table containing the IP parameters for the local PPP entity. | |
| juniPppIpEntry | 1.3.6.1.4.1.4874.2.2.11.1.3.1.1 | not-accessible | IPCP status information for a particular PPP link. | |
| JUN juniPppIpServiceStatus | 1.3.6.1.4.1.4874.2.2.11.1.3.1.1.1 | JuniEnable | read-only | Indicates whether IP protocol service is operating over this PPP link. Service is established on this link through means outside this MIB. |
| INT juniPppIpTerminateReason | 1.3.6.1.4.1.4874.2.2.11.1.3.1.1.2 | INTEGER | read-only | Reason the IPCP link was terminated: none None. other Not specified. noService No IP service configured on this PPP link. admin Administratively disabled. linkDown Underlying link is down. peerTerminated Peer initiated termination. peerRenegotiated Peer initiated renegotiation. maxRetriesExceeded Maximum number of config retries exceeded. negotiationFailure Failed to negotiate IPCP option. See juniPppIpTerminateNegFailOption. |
| INT juniPppIpTerminateNegFailOption | 1.3.6.1.4.1.4874.2.2.11.1.3.1.1.3 | INTEGER | read-only | Reports the PPP IPCP option for which negotiation failed, when juniPppIpTerminateReason has the value 'negotiationFailure'. |
| IP juniPppIpLocalIpAddress | 1.3.6.1.4.1.4874.2.2.11.1.3.1.1.4 | IpAddress | read-only | IP Address used by the local side. |
| IP juniPppIpRemoteIpAddress | 1.3.6.1.4.1.4874.2.2.11.1.3.1.1.5 | IpAddress | read-only | IP Address used by the remote side. |
| IP juniPppIpRemotePrimaryDnsAddress | 1.3.6.1.4.1.4874.2.2.11.1.3.1.1.6 | IpAddress | read-only | Primary DNS server used by the remote side. |
| IP juniPppIpRemoteSecondaryDnsAddress | 1.3.6.1.4.1.4874.2.2.11.1.3.1.1.7 | IpAddress | read-only | Secondary DNS server used by the remote side. |
| IP juniPppIpRemotePrimaryWinsAddress | 1.3.6.1.4.1.4874.2.2.11.1.3.1.1.8 | IpAddress | read-only | Primary WINS server used by the remote side. |
| IP juniPppIpRemoteSecondaryWinsAddress | 1.3.6.1.4.1.4874.2.2.11.1.3.1.1.9 | IpAddress | read-only | Secondary WINS server used by the remote side. |
| C32 juniPppIpNetworkStatusIpcpRenegoTerminates | 1.3.6.1.4.1.4874.2.2.11.1.3.1.1.10 | Counter32 | read-only | Number of times ipcp terminated due to peer exceeding max renegotiation attempts. |
| juniPppIpConfigTable | 1.3.6.1.4.1.4874.2.2.11.1.3.2 | not-accessible | Table containing the IP parameters for the local PPP entity. | |
| juniPppIpConfigEntry | 1.3.6.1.4.1.4874.2.2.11.1.3.2.1 | not-accessible | IPCP configuration information for a particular PPP link. | |
| JUN juniPppIpConfigPeerDnsPriority | 1.3.6.1.4.1.4874.2.2.11.1.3.2.1.1 | JuniEnable | read-write | When enabled, allows peer's DNS address to prevail in the event of a negotiation conflict; when disabled, the local PPP interface's DNS address prevails. |
| JUN juniPppIpConfigPeerWinsPriority | 1.3.6.1.4.1.4874.2.2.11.1.3.2.1.2 | JuniEnable | read-write | When enabled, allows peer's WINS address to prevail in the event of a negotiation conflict; when disabled, the local PPP interface's WINS address prevails. |
| JUN juniPppIpConfigIpcpNetmask | 1.3.6.1.4.1.4874.2.2.11.1.3.2.1.3 | JuniEnable | read-write | Enables the negotiation of the IPCP option netmask (0x90) during IPCP negotiation. |
| JUN juniPppIpConfigInitiateIp | 1.3.6.1.4.1.4874.2.2.11.1.3.2.1.4 | JuniEnable | read-write | Enables the initiation of negotiation of the IPCP. |
| I32 juniPppIpConfigMaxIpcpRenegotiation | 1.3.6.1.4.1.4874.2.2.11.1.3.2.1.5 | Integer32 | read-write | Maximum number of allowed ipcp renegotiation attempts from peer. |
| JUN juniPppIpConfigPromptIpcpDnsOption | 1.3.6.1.4.1.4874.2.2.11.1.3.2.1.6 | JuniEnable | read-write | Control prompting of IPCP DNS option to remote peer. |
| JUN juniPppIpConfigIpcpLockout | 1.3.6.1.4.1.4874.2.2.11.1.3.2.1.7 | JuniEnable | read-write | Enables IPCP lockout. It determines whether this NCP can be negotiated when the interface is already running a different NCP. On enabling this option, the IPCP negotiation will be blocked after a different NCP service is up and waited for 10 seconds for IPCP initiation from peer. |
| juniPppOsi | 1.3.6.1.4.1.4874.2.2.11.1.4 | |||
| juniPppOsiTable | 1.3.6.1.4.1.4874.2.2.11.1.4.1 | not-accessible | Table containing the OSI parameters for the local PPP entity. | |
| juniPppOsiEntry | 1.3.6.1.4.1.4874.2.2.11.1.4.1.1 | not-accessible | OSICP status information for a particular PPP link. | |
| JUN juniPppOsiServiceStatus | 1.3.6.1.4.1.4874.2.2.11.1.4.1.1.1 | JuniEnable | read-only | Indicates whether OSI protocol service is operating over this PPP link. Service is established on this link through means outside this MIB. |
| INT juniPppOsiOperStatus | 1.3.6.1.4.1.4874.2.2.11.1.4.1.1.2 | INTEGER | read-only | The operational status of the OSI network protocol. If the value of this object is up then the finite state machine for the OSI network protocol has reached the Opened state. |
| INT juniPppOsiTerminateReason | 1.3.6.1.4.1.4874.2.2.11.1.4.1.1.3 | INTEGER | read-only | Reason the OSICP link was terminated: none None. other Not specified. noService No OSI service configured on this PPP link. admin Administratively disabled. linkDown Underlying link is down. peerTerminated Peer initiated termination. peerRenegotiated Peer initiated renegotiation. maxRetriesExceeded Maximum number of config retries exceeded. negotiationFailure Failed to negotiate IPCP option. See juniPppOsiTerminateNegFailOption. |
| INT juniPppOsiTerminateNegFailOption | 1.3.6.1.4.1.4874.2.2.11.1.4.1.1.4 | INTEGER | read-only | Reports the PPP OSICP option for which negotiation failed, when juniPppOsiTerminateReason has the value 'negotiationFailure'. |
| INT juniPppOsiLocalAlignNpdu | 1.3.6.1.4.1.4874.2.2.11.1.4.1.1.5 | INTEGER | read-only | Local alignment of network PDU: none No alignment specified. oneModulo4 Alignment on first octet (out of four). twoModulo4 Alignment on second octet (out of four). threeModulo4 Alignment on third octet (out of four). fourModulo4 Alignment on fourth octet (out of four). even Alignment on even-octet boundary. odd Alignment on odd-octet boundary. |
| INT juniPppOsiRemoteAlignNpdu | 1.3.6.1.4.1.4874.2.2.11.1.4.1.1.6 | INTEGER | read-only | Remote alignment of network PDU. none No alignment specified. oneModulo4 Alignment on first octet (out of four). twoModulo4 Alignment on second octet (out of four). threeModulo4 Alignment on third octet (out of four). fourModulo4 Alignment on fourth octet (out of four). even Alignment on even-octet boundary. odd Alignment on odd-octet boundary. |
| juniPppOsiConfigTable | 1.3.6.1.4.1.4874.2.2.11.1.4.2 | not-accessible | Table containing configuration variables for the OSICP for the local PPP entity. | |
| juniPppOsiConfigEntry | 1.3.6.1.4.1.4874.2.2.11.1.4.2.1 | not-accessible | OSICP information for a particular PPP link. | |
| INT juniPppOsiConfigAdminStatus | 1.3.6.1.4.1.4874.2.2.11.1.4.2.1.1 | INTEGER | read-write | The immediate desired status of the OSI network protocol. Setting this object to open will inject an administrative open event into the OSI network protocol's finite state machine. Setting this object to close will inject an administrative close event into the OSI network protocol's finite state machine. |
| juniPppSession | 1.3.6.1.4.1.4874.2.2.11.1.5 | |||
| juniPppSessionTable | 1.3.6.1.4.1.4874.2.2.11.1.5.1 | not-accessible | This table contains entries for PPP interfaces present in the system. | |
| juniPppSessionEntry | 1.3.6.1.4.1.4874.2.2.11.1.5.1.1 | not-accessible | Each entry describes the characteristics of a PPP interface. | |
| T/F juniPppSessionGrant | 1.3.6.1.4.1.4874.2.2.11.1.5.1.1.1 | TruthValue | read-only | Indicates whether a session has been granted via the authentication mechanism. |
| INT juniPppSessionTerminateReason | 1.3.6.1.4.1.4874.2.2.11.1.5.1.1.2 | INTEGER | read-only | The reason the session was terminated. |
| TIK juniPppSessionStartTime | 1.3.6.1.4.1.4874.2.2.11.1.5.1.1.3 | TimeTicks | read-only | The value of sysUpTime when this session last became active. |
| C32 juniPppSessionInOctets | 1.3.6.1.4.1.4874.2.2.11.1.5.1.1.4 | Counter32 | read-only | Number of octets received since this session last became active, as denoted by juniPppSessionStartTime. |
| C32 juniPppSessionOutOctets | 1.3.6.1.4.1.4874.2.2.11.1.5.1.1.5 | Counter32 | read-only | Number of octets sent since this session last became active, as denoted by juniPppSessionStartTime. |
| C32 juniPppSessionInPackets | 1.3.6.1.4.1.4874.2.2.11.1.5.1.1.6 | Counter32 | read-only | Number of packets received since this session last became active, as denoted by juniPppSessionStartTime. |
| C32 juniPppSessionOutPackets | 1.3.6.1.4.1.4874.2.2.11.1.5.1.1.7 | Counter32 | read-only | Number of packets sent since this session last became active, as denoted by juniPppSessionStartTime. |
| I32 juniPppSessionSessionTimeout | 1.3.6.1.4.1.4874.2.2.11.1.5.1.1.8 | Integer32 | read-only | Maximum duration for the session, after which the session terminates automatically. |
| I32 juniPppSessionInactivityTimeout | 1.3.6.1.4.1.4874.2.2.11.1.5.1.1.9 | Integer32 | read-only | Maximum inactivity duration for the session, after which the session terminates automatically. |
| I32 juniPppSessionAccountingInterval | 1.3.6.1.4.1.4874.2.2.11.1.5.1.1.10 | Integer32 | read-only | Interval that must elapse between generation of accounting records for this session. |
| IP juniPppSessionRemoteIpAddress | 1.3.6.1.4.1.4874.2.2.11.1.5.1.1.11 | IpAddress | read-only | Remote IP address, obtained from the authentication service, to be used during IPCP negotiation with the remote side. |
| IP juniPppSessionRemotePrimaryDnsAddress | 1.3.6.1.4.1.4874.2.2.11.1.5.1.1.12 | IpAddress | read-only | Remote primary DNS IP address, obtained from the authentication service, to be used during IPCP negotiation with the remote side. |
| IP juniPppSessionRemoteSecondaryDnsAddress | 1.3.6.1.4.1.4874.2.2.11.1.5.1.1.13 | IpAddress | read-only | Remote secondary DNS IP address, obtained from the authentication service, to be used during IPCP negotiation with the remote side. |
| IP juniPppSessionRemotePrimaryWinsAddress | 1.3.6.1.4.1.4874.2.2.11.1.5.1.1.14 | IpAddress | read-only | Remote primary WINS IP address, obtained from the authentication service, to be used during IPCP negotiation with the remote side. |
| IP juniPppSessionRemoteSecondaryWinsAddress | 1.3.6.1.4.1.4874.2.2.11.1.5.1.1.15 | IpAddress | read-only | Remote secondary WINS IP address, obtained from the authentication service, to be used during IPCP negotiation with the remote side. |
| ADR juniPppSessionRemoteIpv6AddressIfIdentifier | 1.3.6.1.4.1.4874.2.2.11.1.5.1.1.16 | Ipv6AddressIfIdentifier | read-only | IPV6 Address Interface Identifier obtained from the authentication service, to be used during IPCP negotiation with the remote side. |
| T/F juniPppSessionInhibitIp | 1.3.6.1.4.1.4874.2.2.11.1.5.1.1.17 | TruthValue | read-only | Indicates whether a session has had its IP service inhibited by the authentication mechanism. |
| T/F juniPppSessionInhibitIpv6 | 1.3.6.1.4.1.4874.2.2.11.1.5.1.1.18 | TruthValue | read-only | Indicates whether a session has had its IPv6 service inhibited by the authentication mechanism. |
| juniPppMlPpp | 1.3.6.1.4.1.4874.2.2.11.1.6 | |||
| juniPppMlPppBundleTable | 1.3.6.1.4.1.4874.2.2.11.1.6.1 | not-accessible | This table contains entries for MLPPP bundles present in the system. | |
| juniPppMlPppBundleEntry | 1.3.6.1.4.1.4874.2.2.11.1.6.1.1 | not-accessible | Each entry describes the characteristics of a MLPPP bundle. | |
| JUN juniPppMlPppBundleName | 1.3.6.1.4.1.4874.2.2.11.1.6.1.1.1 | JuniPppMlPppBundleName | not-accessible | The administrative name of the MLPPP bundle associated with this MLPPP network interface. |
| ROW juniPppMlPppBundleRowStatus | 1.3.6.1.4.1.4874.2.2.11.1.6.1.1.2 | RowStatus | read-create | The rowStatus for this entry. The following sets are supported: createAndGo(4), destroy(6) The following values can be read from this object: active(1) |
| NUM juniPppMlPppBundleNetworkIfIndex | 1.3.6.1.4.1.4874.2.2.11.1.6.1.1.3 | InterfaceIndex | read-only | The ifIndex of this MLPPP network interface. It is a valid ifIndex even if there is no corresponding network interface instance in the juniPppMlPppLinkConfigTable. |
| JUN juniPppMlPppNextLinkIfIndex | 1.3.6.1.4.1.4874.2.2.11.1.6.2 | JuniNextIfIndex | read-only | Coordinate ifIndex value allocation for entries in juniPppMlPppLinkConfigTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously. |
| juniPppMlPppLinkConfigTable | 1.3.6.1.4.1.4874.2.2.11.1.6.3 | not-accessible | This table contains entries for MLPPP interfaces present in the system. | |
| juniPppMlPppLinkConfigEntry | 1.3.6.1.4.1.4874.2.2.11.1.6.3.1 | not-accessible | Each entry describes the characteristics of MLPPP interface. Creating/deleting entries in this table causes corresponding entries for be created/deleted in ifTable/ifXTable/juniIfTable. | |
| NUM juniPppMlPppLinkConfigIfIndex | 1.3.6.1.4.1.4874.2.2.11.1.6.3.1.1 | InterfaceIndex | not-accessible | The ifIndex of the MLPPP interface. When creating entries in this table, suitable values for this object are determined by reading juniPppMlPppNextLinkIfIndex. |
| NUM juniPppMlPppLinkConfigLowerIfIndex | 1.3.6.1.4.1.4874.2.2.11.1.6.3.1.2 | InterfaceIndexOrZero | read-create | The ifIndex of an interface over which this PPP interface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a non-zero value be configured at entry creation. |
| I32 juniPppMlPppLinkConfigKeepalive | 1.3.6.1.4.1.4874.2.2.11.1.6.3.1.4 | Integer32 | read-create | Keepalive interval in seconds. A value of zero disables keepalive. Keepalive is performed using LCP Echo. |
| JUN juniPppMlPppLinkConfigAuthentication | 1.3.6.1.4.1.4874.2.2.11.1.6.3.1.5 | JuniPppAuthentication | read-create | Specifies the type(s) of authentication, if any, to be negotiated with the peer: none No authentication is negotiated. pap PAP negotiation only. chap CHAP negotiation only. papChap PAP negotiation is attempted first; if fails, attempt CHAP. chapPap CHAP negotiation is attempted first; if fails, attempt PAP. If authentication negotiation is not supported for this MLPPP interface, then any attempt to explicitely set this object will result in a notWritable error and it will be implicitily set to the DEFVAL on row creation. Setting this object to none(0) will set juniPppMlPppLinkConfigAuthenticatorVirtualRouter object to an empty string. This object returns a none (0) value on the get operation. New object juniPppMlPppLinkConfigAuthentication2 will reflect the configured values. Setting this object along with the juniPppMlPppLinkConfigAuthentication2 object will return an inconsistentValue error. |
| I32 juniPppMlPppLinkConfigMaxAuthenRetries | 1.3.6.1.4.1.4874.2.2.11.1.6.3.1.6 | Integer32 | read-create | The number of authentication retries permitted, in addition to a failed initial attempt. If all retries fail, the link is reset. |
| ROW juniPppMlPppLinkConfigRowStatus | 1.3.6.1.4.1.4874.2.2.11.1.6.3.1.7 | RowStatus | read-create | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: juniPppMlPppLinkConfigRowStatus juniPppMlPppLinkConfigLowerIfIndex In addition, when creating an entry the following conditions must hold: A value for juniPppMlPppLinkConfigIndex must have been determined previously, by reading juniPppMlPppNextIfIndex. The interface identified by juniPppMlPppLinkConfigLowerIfIndex must exist. A corresponding entry in ifTable/ifXTable/juniIfTable is created/ destroyed as a result of creating/destroying an entry in this table. |
| JUN juniPppMlPppLinkConfigAaaProfile | 1.3.6.1.4.1.4874.2.2.11.1.6.3.1.8 | JuniName | read-create | The name of the AAA profile to be used for authentication on the PPP interface. Setting this object statically binds the AAA profile with the PPP interface. If this object is not explicitly set or it is set to null string, then this object is ignored. On a Set operation, if the value of this object is not null and does not correspond to an existing AAA profile, then an inconsistentValue error is returned. |
| I32 juniPppMlPppLinkConfigChapMinChallengeLength | 1.3.6.1.4.1.4874.2.2.11.1.6.3.1.9 | Integer32 | read-create | Minimum value of the CHAP authenticator challenge length value. This value is never allowed to be set to a value greater than juniPppMlPppLinkConfigChapMaxChallengeLength. |
| I32 juniPppMlPppLinkConfigChapMaxChallengeLength | 1.3.6.1.4.1.4874.2.2.11.1.6.3.1.10 | Integer32 | read-create | Maximum value of the CHAP authenticator challenge length value. |
| JUN juniPppMlPppLinkConfigPassiveMode | 1.3.6.1.4.1.4874.2.2.11.1.6.3.1.11 | JuniEnable | read-create | When enabled, LCP state machine is forced into passive mode on lower layer UP message. It adds compatibility with slow and buggy clients. |
| JUN juniPppMlPppLinkConfigAuthenticatorVirtualRouter | 1.3.6.1.4.1.4874.2.2.11.1.6.3.1.12 | JuniName | read-create | The name of the virtual router (Juniper-ROUTER-MIB.juniRouterName) to be used for authentication on the PPP interface. Setting this object statically binds the authenticating virtual router with the link interface. If this object is not explicitly set or it is set to null string, then this object is ignored and the virtual router used for authentication is determined by other means. On a Set operation, if the value of this object is not null and does not correspond to an existing virtual router, then an inconsistentValue error is returned. |
| JUN juniPppMlPppLinkConfigFragmentation | 1.3.6.1.4.1.4874.2.2.11.1.6.3.1.13 | JuniEnable | read-create | Enables MLPPP fragmentation. Changing this object has an effect when the link is next restarted. |
| JUN juniPppMlPppLinkConfigReassembly | 1.3.6.1.4.1.4874.2.2.11.1.6.3.1.14 | JuniEnable | read-create | Enables MLPPP reassembly. Changing this object has an effect when the link is next restarted. |
| I32 juniPppMlPppLinkConfigMaxReceiveReconstructedUnit | 1.3.6.1.4.1.4874.2.2.11.1.6.3.1.15 | Integer32 | read-create | The Maximum Receive Reconstructed Unit (MRRU) that the local PPP entity will advertise to the remote entity. If the value of this variable is 1, then the MRRU is set to the local MRU value. Changing this object has an effect when the link is next restarted. |
| I32 juniPppMlPppLinkConfigFragmentSize | 1.3.6.1.4.1.4874.2.2.11.1.6.3.1.16 | Integer32 | read-create | The size of fragments transmitted by the local PPP entity. If the value of this variable is 1, then the fragment size is set to the link's MTU value. Changing this object has an effect when the link is next restarted. |
| JUN juniPppMlPppLinkConfigHashLinkSelection | 1.3.6.1.4.1.4874.2.2.11.1.6.3.1.17 | JuniEnable | read-create | Enables MLPPP hash-based link selection for non-best-effort traffic. Changing this object has an effect when the link is next restarted. |
| JUN juniPppMlPppLinkConfigAuthentication2 | 1.3.6.1.4.1.4874.2.2.11.1.6.3.1.18 | JuniNibbleConfig | read-create | A configuration variable comprised of nibbles i.e. 4 bits, such that a client can supply a list of 0 to 8 selections. The least significant nibble is the first value of the list, and the most significant nibble is the last value. The value in each field ranges from 0 to 15, however the first nibble with value 0 indicates the end of the list. Repetition of values is not allowed. Segregation of values is not allowed. Valid Values are: none - 0 pap - 1 chap - 2 eap - 3 Example valid encoding: 0x00000321 0x00000012 Not a valid encoding: 0x00000121 0x01002001 If authentication negotiation is not supported for this PPP interface, then any attempt to explicitly set this object will result in a notWritable error and it will be implicitly set to the DEFVAL on row creation. Setting this object to null will set juniPppMlPppLinkConfigAuthenticatorVirtualRouter object to an empty string. Setting this object along with the juniPppMlPppLinkConfigAuthentication object will return an inconsistentValue error. |
| JUN juniPppMlPppLinkConfigIgnoreMagicNumberMismatch | 1.3.6.1.4.1.4874.2.2.11.1.6.3.1.19 | JuniEnable | read-create | The ignore magic number mismatch option of the PPP interface determines the action to be taken, when the peer has not negotiated any value yet sent null or invalid magic number in the LCP echo packets. The two actions that can be configured are: 1) Ignore the mismatch and retain connection 2) Disallow the mismatch and terminate connection |
| JUN juniPppMlPppLinkConfigMultilinkMulticlass | 1.3.6.1.4.1.4874.2.2.11.1.6.3.1.20 | JuniEnable | read-create | Enables Multiclass Multilink PPP (MCML). Changing this object has an effect when the link is next restarted. |
| INT juniPppMlPppLinkConfigMultilinkMaxMultiClasses | 1.3.6.1.4.1.4874.2.2.11.1.6.3.1.21 | INTEGER | read-create | Maximum number of MCML classes to be negotiated. Changing this object has an effect when the link is next restarted. |
| JUN juniPppMlPppNextNetworkIfIndex | 1.3.6.1.4.1.4874.2.2.11.1.6.4 | JuniNextIfIndex | read-only | Coordinate ifIndex value allocation for entries in juniPppMlPppNetworkConfigTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously. |
| juniPppMlPppNetworkConfigTable | 1.3.6.1.4.1.4874.2.2.11.1.6.5 | not-accessible | This table contains entries for MLPPP network interfaces present in the system. | |
| juniPppMlPppNetworkConfigEntry | 1.3.6.1.4.1.4874.2.2.11.1.6.5.1 | not-accessible | Each entry describes the characteristics of MLPPP interface. Creating/deleting entries in this table causes corresponding entries for be created/deleted in ifTable/ifXTable/juniIfTable. | |
| NUM juniPppMlPppNetworkConfigIfIndex | 1.3.6.1.4.1.4874.2.2.11.1.6.5.1.1 | InterfaceIndex | not-accessible | The ifIndex of the MLPPP network interface. When creating entries in this table, suitable values for this object are determined by reading juniPppMlPppNextNetworkIfIndex. |
| NUM juniPppMlPppNetworkConfigLowerIfIndex | 1.3.6.1.4.1.4874.2.2.11.1.6.5.1.2 | InterfaceIndex | read-create | The ifIndex of a PPP link interface over which this PPP network interface is to be layered. On sets, the value of this object must equal on of the previously created PPP link interfaces created in the juniPppMlPppLinkConfigTable. On gets, the value of this object is the lexicographically least PPP link interface in a potential bundle of PPP link interfaces. |
| JUN juniPppMlPppNetworkBundleName | 1.3.6.1.4.1.4874.2.2.11.1.6.5.1.3 | JuniPppMlPppBundleName | read-create | The MLPPP bundle name administratively assigned. |
| ROW juniPppMlPppNetworkRowStatus | 1.3.6.1.4.1.4874.2.2.11.1.6.5.1.4 | RowStatus | read-create | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: juniPppMlPppNetworkConfigLowerIfIndex juniPppMlPppNetworkBundleName juniPppMlPppNetworkConfigRowStatus In addition, when creating an entry the following conditions must hold: A value for juniPppMlPppNetworkConfigIndex must have been determined previously, by reading juniPppMlPppNextNetworkIfIndex. The interface identified by juniPppMlPppNetworkConfigLowerIfIndex must exist by a creation request to the juniPppMlPppLinkConfigTable. The bundleName specified in juniPppMlPppNetworkBundleName must have been created first in the juniPppMlPppBundleTable. A corresponding entry in ifTable/ifXTable/juniIfTable is created/ destroyed as a result of creating/destroying an entry in this table. |
| juniPppMlPppLinkBindTable | 1.3.6.1.4.1.4874.2.2.11.1.6.6 | not-accessible | This table contains entries for MLPPP Link interface to MLPPP network interfaces bindings. | |
| juniPppMlPppLinkBindEntry | 1.3.6.1.4.1.4874.2.2.11.1.6.6.1 | not-accessible | Each entry describes the MLPPP link interface to MLPPP network interface bindings. | |
| NUM juniPppMlPppBindNetworkIfIndex | 1.3.6.1.4.1.4874.2.2.11.1.6.6.1.1 | InterfaceIndex | not-accessible | The ifIndex of the MLPPP network interface. |
| NUM juniPppMlPppBindLinkIfIndex | 1.3.6.1.4.1.4874.2.2.11.1.6.6.1.2 | InterfaceIndex | not-accessible | The ifIndex of a MLPPP link interface bound by the MLPPP network interface defined by juniPppMlPppBindNetworkIfIndex. |
| ROW juniPppMlPppBindRowStatus | 1.3.6.1.4.1.4874.2.2.11.1.6.6.1.3 | RowStatus | read-create | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: juniPppMlPppBindRowStatus In addition, when creating an entry the following conditions must hold: The interfaces identified by juniPppMlPppBindNetworkIfIndex and juniPppMlPppBindLinkIfIndex must be created in the juniPppMlPppNetworkConfigTable and juniPppMlPppLinkConfigTable respectively. A MLPPP bundle must be associated with the juniPppMlPppNetworkIfIndex and exist in the juniPppMibPppBundleTable. A corresponding entry in ifStackTable is created/destroyed as a result of creating/destroying an entry in this table. |
| juniPppMlPppMulticlassTraffiClassTable | 1.3.6.1.4.1.4874.2.2.11.1.6.7 | not-accessible | This table contains entries for MLPPP Multiclass to traffic class mapping of interfaces present in the system. | |
| juniPppMlPppMulticlassTrafficClassEntry | 1.3.6.1.4.1.4874.2.2.11.1.6.7.1 | not-accessible | Each entry describes the MLPPP multiclass to traffic class mapping of interfaces.Other characteristics like fragmentation and reassembly for a particular traffic class can be configured. | |
| NUM juniPppMlPppMulticlassIfIndex | 1.3.6.1.4.1.4874.2.2.11.1.6.7.1.1 | InterfaceIndex | not-accessible | The ifIndex of the MLPPP interface. When creating entries in this table, suitable values for this object are determined by reading juniPppMlPppMulticlassIfIndex. |
| INT juniPppMlPppMulticlassIndex | 1.3.6.1.4.1.4874.2.2.11.1.6.7.1.2 | INTEGER | not-accessible | The multiclass index of a particular traffic class type. This can be configured only when MCMP is enabled on the link interface. |
| JUN juniPppMlPppMulticlassTcName | 1.3.6.1.4.1.4874.2.2.11.1.6.7.1.3 | JuniPppMlPppMulticlassTcName | read-write | The traffic class index mapped to the MCMP multiclass index. This can be configured only when MCMP is enabled on the link interface. |
| JUN juniPppMlPppMulticlassFragmentation | 1.3.6.1.4.1.4874.2.2.11.1.6.7.1.4 | JuniEnable | read-write | Enable or disable fragmentation for a particular multiclass. This can be configured only when MCMP is enaled on the link interface. |
| JUN juniPppMlPppMulticlassReassembly | 1.3.6.1.4.1.4874.2.2.11.1.6.7.1.5 | JuniEnable | read-write | Enable or disable rassembly for a particular multiclass. This can be configured only when MCMP is enaled on the link interface. |
| juniPppSummary | 1.3.6.1.4.1.4874.2.2.11.1.7 | |||
| I32 juniPppSummaryPppInterfaceCount | 1.3.6.1.4.1.4874.2.2.11.1.7.1 | Integer32 | read-only | The total number of PPP interfaces configured in the system. |
| I32 juniPppSummaryPppIpNCPs | 1.3.6.1.4.1.4874.2.2.11.1.7.2 | Integer32 | read-only | The total number IP NCPs configured in the system. |
| I32 juniPppSummaryPppOsiNCPs | 1.3.6.1.4.1.4874.2.2.11.1.7.3 | Integer32 | read-only | The total number of OSI NCPs configured in the system. |
| I32 juniPppSummaryPppIfAdminUp | 1.3.6.1.4.1.4874.2.2.11.1.7.4 | Integer32 | read-only | The total number of PPP interfaces in the system that are administratively configured to up(1). |
| I32 juniPppSummaryPppIfAdminDown | 1.3.6.1.4.1.4874.2.2.11.1.7.5 | Integer32 | read-only | The total number of PPP interfaces in the system that are administrateively configued to down(2). |
| I32 juniPppSummaryPppIfOperUp | 1.3.6.1.4.1.4874.2.2.11.1.7.7 | Integer32 | read-only | The total number of PPP interfaces in the system with an operational state of up(1). |
| I32 juniPppSummaryPppIfOperDown | 1.3.6.1.4.1.4874.2.2.11.1.7.8 | Integer32 | read-only | The total number of PPP interfaces in the system with an operational state of down(2). |
| I32 juniPppSummaryPppIfOperDormant | 1.3.6.1.4.1.4874.2.2.11.1.7.9 | Integer32 | read-only | The total number of PPP interfaces in the system with an operational state of dormant(5). |
| I32 juniPppSummaryPppIfNotPresent | 1.3.6.1.4.1.4874.2.2.11.1.7.10 | Integer32 | read-only | The total number of PPP interfaces in the system with an operational state of notPresent(6). |
| I32 juniPppSummaryPppIfLowerLayerDown | 1.3.6.1.4.1.4874.2.2.11.1.7.11 | Integer32 | read-only | The total number of PPP interfaces in the system with an operational state of lowerLayerDown(7). |
| I32 juniPppSummaryPppIpNcpOpened | 1.3.6.1.4.1.4874.2.2.11.1.7.12 | Integer32 | read-only | The total number of PPP IP NCPs in the system with an operational state of opened(1). |
| I32 juniPppSummaryPppIpNcpClosed | 1.3.6.1.4.1.4874.2.2.11.1.7.13 | Integer32 | read-only | The total number of PPP IP NCPs in the system with an operational state of not-opened(2). |
| I32 juniPppSummaryPppOsiNcpOpened | 1.3.6.1.4.1.4874.2.2.11.1.7.14 | Integer32 | read-only | The total number of PPP OSI NCPs in the system with an operational state of opened. |
| I32 juniPppSummaryPppOsiNcpClosed | 1.3.6.1.4.1.4874.2.2.11.1.7.15 | Integer32 | read-only | The total number of PPP OSI NCPs in the system with an operational state of closed. |
| TIK juniPppSummaryPppIfLastChangeTime | 1.3.6.1.4.1.4874.2.2.11.1.7.16 | TimeTicks | read-only | The value of the sysUpTime at the time of the last PPP interface creation or deletion in the system. If the number of PPP interfaces has been unchanged since the last re-initialization of the system, then this object contains a zero value. |
| I32 juniPppSummaryPppLinkInterfaceCount | 1.3.6.1.4.1.4874.2.2.11.1.7.17 | Integer32 | read-only | The total number of PPP Link interfaces configured in the system. |
| I32 juniPppSummaryPppLinkIfAdminUp | 1.3.6.1.4.1.4874.2.2.11.1.7.18 | Integer32 | read-only | The total number of PPP Link interfaces in the system that are administratively configured to up(1). |
| I32 juniPppSummaryPppLinkIfAdminDown | 1.3.6.1.4.1.4874.2.2.11.1.7.19 | Integer32 | read-only | The total number of PPP Link interfaces in the system that are administrateively configued to down(2). |
| I32 juniPppSummaryPppLinkIfOperUp | 1.3.6.1.4.1.4874.2.2.11.1.7.20 | Integer32 | read-only | The total number of PPP Link interfaces in the system with an operational state of up(1). |
| I32 juniPppSummaryPppLinkIfOperDown | 1.3.6.1.4.1.4874.2.2.11.1.7.21 | Integer32 | read-only | The total number of PPP Link interfaces in the system with an operational state of down(2). |
| I32 juniPppSummaryPppLinkIfOperDormant | 1.3.6.1.4.1.4874.2.2.11.1.7.22 | Integer32 | read-only | The total number of PPP Link interfaces in the system with an operational state of dormant(5). |
| I32 juniPppSummaryPppLinkIfNotPresent | 1.3.6.1.4.1.4874.2.2.11.1.7.23 | Integer32 | read-only | The total number of PPP link interfaces in the system with an operational state of notPresent(6). |
| I32 juniPppSummaryPppLinkIfLowerLayerDown | 1.3.6.1.4.1.4874.2.2.11.1.7.24 | Integer32 | read-only | The total number of PPP Link interfaces in the system with an operational state of lowerLayerDown(7). |
| TIK juniPppSummaryPppLinkIfLastChangeTime | 1.3.6.1.4.1.4874.2.2.11.1.7.25 | TimeTicks | read-only | The value of the sysUpTime at the time of the last PPP Link interface creation or deletion in the system. If the number of PPP interfaces has been unchanged since the last re-initialization of the system, then this object contains a zero value. |
| I32 juniPppSummaryPppNetworkInterfaceCount | 1.3.6.1.4.1.4874.2.2.11.1.7.26 | Integer32 | read-only | The total number of PPP network interfaces configured in the system. |
| I32 juniPppSummaryPppNetworkIpNCPs | 1.3.6.1.4.1.4874.2.2.11.1.7.27 | Integer32 | read-only | The total number IP NCPs in the system configured on PPP network interfaces. |
| I32 juniPppSummaryPppNetworkOsiNCPs | 1.3.6.1.4.1.4874.2.2.11.1.7.28 | Integer32 | read-only | The total number of OSI NCPs in the system configured on PPP network interfaces. |
| I32 juniPppSummaryPppNetworkIfAdminUp | 1.3.6.1.4.1.4874.2.2.11.1.7.29 | Integer32 | read-only | The total number of PPP network interfaces in the system that are administratively configured to up(1). |
| I32 juniPppSummaryPppNetworkIfAdminDown | 1.3.6.1.4.1.4874.2.2.11.1.7.30 | Integer32 | read-only | The total number of PPP network interfaces in the system that are administrateively configued to down(2). |
| I32 juniPppSummaryPppNetworkIfOperUp | 1.3.6.1.4.1.4874.2.2.11.1.7.31 | Integer32 | read-only | The total number of PPP network interfaces in the system with an operational state of up(1). |
| I32 juniPppSummaryPppNetworkIfOperDown | 1.3.6.1.4.1.4874.2.2.11.1.7.32 | Integer32 | read-only | The total number of PPP network interfaces in the system with an operational state of down(2). |
| I32 juniPppSummaryPppNetworkIfOperDormant | 1.3.6.1.4.1.4874.2.2.11.1.7.33 | Integer32 | read-only | The total number of PPP network interfaces in the system with an operational state of dormant(5). |
| I32 juniPppSummaryPppNetworkIfNotPresent | 1.3.6.1.4.1.4874.2.2.11.1.7.34 | Integer32 | read-only | The total number of PPP network interfaces in the system with an operational state of notPresent(6). |
| I32 juniPppSummaryPppNetworkIfLowerLayerDown | 1.3.6.1.4.1.4874.2.2.11.1.7.35 | Integer32 | read-only | The total number of PPP network interfaces in the system with an operational state of lowerLayerDown(7). |
| I32 juniPppSummaryPppNetworkIpNcpOpened | 1.3.6.1.4.1.4874.2.2.11.1.7.36 | Integer32 | read-only | The total number of PPP IP NCPs in the system with an operational state of opened(1). |
| I32 juniPppSummaryPppNetworkIpNcpClosed | 1.3.6.1.4.1.4874.2.2.11.1.7.37 | Integer32 | read-only | The total number of PPP IP NCPs in the system with an operational state of not-opened(2). |
| I32 juniPppSummaryPppNetworkOsiNcpOpened | 1.3.6.1.4.1.4874.2.2.11.1.7.38 | Integer32 | read-only | The total number of PPP OSI NCPs in the system with an operational state of opened. |
| I32 juniPppSummaryPppNetworkOsiNcpClosed | 1.3.6.1.4.1.4874.2.2.11.1.7.39 | Integer32 | read-only | The total number of PPP OSI NCPs in the system with an operational state of closed. |
| TIK juniPppSummaryPppNetworkIfLastChangeTime | 1.3.6.1.4.1.4874.2.2.11.1.7.40 | TimeTicks | read-only | The value of the sysUpTime at the time of the last PPP network interface creation or deletion in the system. If the number of PPP network interfaces has been unchanged since the last re-initialization of the system, then this object contains a zero value. |
| I32 juniPppSummaryPppIpv6NCPs | 1.3.6.1.4.1.4874.2.2.11.1.7.41 | Integer32 | read-only | The total number IPv6 NCPs configured in the system. |
| I32 juniPppSummaryPppIpv6NcpOpened | 1.3.6.1.4.1.4874.2.2.11.1.7.42 | Integer32 | read-only | The total number of PPP IPv6 NCPs in the system with an operational state of opened(1). |
| I32 juniPppSummaryPppIpv6NcpClosed | 1.3.6.1.4.1.4874.2.2.11.1.7.43 | Integer32 | read-only | The total number of PPP IPv6 NCPs in the system with an operational state of not-opened(2). |
| I32 juniPppSummaryPppNetworkIpv6NCPs | 1.3.6.1.4.1.4874.2.2.11.1.7.44 | Integer32 | read-only | The total number IPv6 NCPs configured in the system. |
| I32 juniPppSummaryPppNetworkIpv6NcpOpened | 1.3.6.1.4.1.4874.2.2.11.1.7.45 | Integer32 | read-only | The total number of PPP IPv6 NCPs in the system with an operational state of opened(1). |
| I32 juniPppSummaryPppNetworkIpv6NcpClosed | 1.3.6.1.4.1.4874.2.2.11.1.7.46 | Integer32 | read-only | The total number of PPP IPv6 NCPs in the system with an operational state of not-opened(2). |
| I32 juniPppSummaryPppStaticInterfaceCount | 1.3.6.1.4.1.4874.2.2.11.1.7.47 | Integer32 | read-only | The total number of static PPP interfaces configured in the system. |
| I32 juniPppSummaryPppMplsNCPs | 1.3.6.1.4.1.4874.2.2.11.1.7.48 | Integer32 | read-only | The total number MPLS NCPs configured in the system. |
| I32 juniPppSummaryPppIpAdminOpen | 1.3.6.1.4.1.4874.2.2.11.1.7.49 | Integer32 | read-only | The total number of IP NCPs in the system that are administratively configured to open(1). |
| I32 juniPppSummaryPppIpAdminClose | 1.3.6.1.4.1.4874.2.2.11.1.7.50 | Integer32 | read-only | The total number of IP NCPs in the system that are administratively configured to close(2). |
| I32 juniPppSummaryPppIpv6AdminOpen | 1.3.6.1.4.1.4874.2.2.11.1.7.51 | Integer32 | read-only | The total number of IPV6 NCPs in the system that are administratively configured to open(1). |
| I32 juniPppSummaryPppIpv6AdminClose | 1.3.6.1.4.1.4874.2.2.11.1.7.52 | Integer32 | read-only | The total number of IPV6 NCPs in the system that are administratively configured to close(2). |
| I32 juniPppSummaryPppOsiAdminOpen | 1.3.6.1.4.1.4874.2.2.11.1.7.53 | Integer32 | read-only | The total number of OSI NCPs in the system that are administratively configured to open(1). |
| I32 juniPppSummaryPppOsiAdminClose | 1.3.6.1.4.1.4874.2.2.11.1.7.54 | Integer32 | read-only | The total number of OSI NCPs in the system that are administratively configured to close(2). |
| I32 juniPppSummaryPppMplsAdminOpen | 1.3.6.1.4.1.4874.2.2.11.1.7.55 | Integer32 | read-only | The total number of MPLS NCPs in the system that are administratively configured to open(1). |
| I32 juniPppSummaryPppMplsAdminClose | 1.3.6.1.4.1.4874.2.2.11.1.7.56 | Integer32 | read-only | The total number of MPLS NCPs in the system that are administratively configured to close(2). |
| I32 juniPppSummaryPppIpNcpNotPresent | 1.3.6.1.4.1.4874.2.2.11.1.7.57 | Integer32 | read-only | The total number of PPP IP NCPs in the system with an operational state of notPresent(3). |
| I32 juniPppSummaryPppIpNcpNoResources | 1.3.6.1.4.1.4874.2.2.11.1.7.58 | Integer32 | read-only | The total number of PPP IP NCPs in the system with an operational state of noResources(4). |
| I32 juniPppSummaryPppIpv6NcpNotPresent | 1.3.6.1.4.1.4874.2.2.11.1.7.59 | Integer32 | read-only | The total number of PPP IPV6 NCPs in the system with an operational state of notPresent(3). |
| I32 juniPppSummaryPppIpv6NcpNoResources | 1.3.6.1.4.1.4874.2.2.11.1.7.60 | Integer32 | read-only | The total number of PPP IPV6 NCPs in the system with an operational state of noResources(4). |
| I32 juniPppSummaryPppOsiNcpNotPresent | 1.3.6.1.4.1.4874.2.2.11.1.7.61 | Integer32 | read-only | The total number of PPP OSI NCPs in the system with an operational state of notPresent(3). |
| I32 juniPppSummaryPppOsiNcpNoResources | 1.3.6.1.4.1.4874.2.2.11.1.7.62 | Integer32 | read-only | The total number of PPP OSI NCPs in the system with an operational state of noResources(4). |
| I32 juniPppSummaryPppMplsNcpOpened | 1.3.6.1.4.1.4874.2.2.11.1.7.63 | Integer32 | read-only | The total number of PPP MPLS NCPs in the system with an operational state of opened(1). |
| I32 juniPppSummaryPppMplsNcpClosed | 1.3.6.1.4.1.4874.2.2.11.1.7.64 | Integer32 | read-only | The total number of PPP MPLS NCPs in the system with an operational state of not-opened(2). |
| I32 juniPppSummaryPppMplsNcpNotPresent | 1.3.6.1.4.1.4874.2.2.11.1.7.65 | Integer32 | read-only | The total number of PPP MPLS NCPs in the system with an operational state of notPresent(3). |
| I32 juniPppSummaryPppMplsNcpNoResources | 1.3.6.1.4.1.4874.2.2.11.1.7.66 | Integer32 | read-only | The total number of PPP MPLS NCPs in the system with an operational state of noResources(4). |
| I32 juniPppSummaryPppLinkStaticInterfaceCount | 1.3.6.1.4.1.4874.2.2.11.1.7.67 | Integer32 | read-only | The total number of static PPP Link interfaces configured in the system. |
| I32 juniPppSummaryPppNetworkStaticInterfaceCount | 1.3.6.1.4.1.4874.2.2.11.1.7.68 | Integer32 | read-only | The total number of static PPP network interfaces configured in the system. |
| I32 juniPppSummaryPppNetworkMplsNCPs | 1.3.6.1.4.1.4874.2.2.11.1.7.69 | Integer32 | read-only | The total number of MPLS NCPs in the system configured on PPP network interfaces. |
| I32 juniPppSummaryPppNetworkIpAdminOpen | 1.3.6.1.4.1.4874.2.2.11.1.7.70 | Integer32 | read-only | The total number of IP NCPs in the system configured on PPP network interfaces that are administratively configured to open(1). |
| I32 juniPppSummaryPppNetworkIpAdminClose | 1.3.6.1.4.1.4874.2.2.11.1.7.71 | Integer32 | read-only | The total number of IP NCPs in the system configured on PPP network interfaces that are administratively configured to close(2). |
| I32 juniPppSummaryPppNetworkIpv6AdminOpen | 1.3.6.1.4.1.4874.2.2.11.1.7.72 | Integer32 | read-only | The total number of IPV6 NCPs in the system configured on PPP network interfaces that are administratively configured to open(1). |
| I32 juniPppSummaryPppNetworkIpv6AdminClose | 1.3.6.1.4.1.4874.2.2.11.1.7.73 | Integer32 | read-only | The total number of IPV6 NCPs in the system configured on PPP network interfaces that are administratively configured to close(2). |
| I32 juniPppSummaryPppNetworkOsiAdminOpen | 1.3.6.1.4.1.4874.2.2.11.1.7.74 | Integer32 | read-only | The total number of OSI NCPs in the system configured on PPP network interfaces that are administratively configured to open(1). |
| I32 juniPppSummaryPppNetworkOsiAdminClose | 1.3.6.1.4.1.4874.2.2.11.1.7.75 | Integer32 | read-only | The total number of OSI NCPs in the system configured on PPP network interfaces that are administratively configured to close(2). |
| I32 juniPppSummaryPppNetworkMplsAdminOpen | 1.3.6.1.4.1.4874.2.2.11.1.7.76 | Integer32 | read-only | The total number of MPLS NCPs in the system configured on PPP network interfaces that are administratively configured to open(1). |
| I32 juniPppSummaryPppNetworkMplsAdminClose | 1.3.6.1.4.1.4874.2.2.11.1.7.77 | Integer32 | read-only | The total number of MPLS NCPs in the system configured on PPP network interfaces that are administratively configured to close(2). |
| I32 juniPppSummaryPppNetworkIpNcpNotPresent | 1.3.6.1.4.1.4874.2.2.11.1.7.78 | Integer32 | read-only | The total number of IP NCPs in the system configured on PPP network interfaces with an operational state of notPresent(3). |
| I32 juniPppSummaryPppNetworkIpNcpNoResources | 1.3.6.1.4.1.4874.2.2.11.1.7.79 | Integer32 | read-only | The total number of IP NCPs in the system configured on PPP network interfaces with an operational state of noResources(4). |
| I32 juniPppSummaryPppNetworkIpv6NcpNotPresent | 1.3.6.1.4.1.4874.2.2.11.1.7.80 | Integer32 | read-only | The total number of IPV6 NCPs in the system configured on PPP network interfaces with an operational state of notPresent(3). |
| I32 juniPppSummaryPppNetworkIpv6NcpNoResources | 1.3.6.1.4.1.4874.2.2.11.1.7.81 | Integer32 | read-only | The total number of IPV6 NCPs in the system configured on PPP network interfaces with an operational state of noResources(4). |
| I32 juniPppSummaryPppNetworkOsiNcpNotPresent | 1.3.6.1.4.1.4874.2.2.11.1.7.82 | Integer32 | read-only | The total number of OSI NCPs in the system configured on PPP network interfaces with an operational state of notPresent(3). |
| I32 juniPppSummaryPppNetworkOsiNcpNoResources | 1.3.6.1.4.1.4874.2.2.11.1.7.83 | Integer32 | read-only | The total number of OSI NCPs in the system configured on PPP network interfaces with an operational state of noResources(4). |
| I32 juniPppSummaryPppNetworkMplsNcpOpened | 1.3.6.1.4.1.4874.2.2.11.1.7.84 | Integer32 | read-only | The total number of MPLS NCPs in the system configured on PPP network interfaces with an operational state of opened(1). |
| I32 juniPppSummaryPppNetworkMplsNcpClosed | 1.3.6.1.4.1.4874.2.2.11.1.7.85 | Integer32 | read-only | The total number of MPLS NCPs in the system configured on PPP network interfaces with an operational state of not-opened(2). |
| I32 juniPppSummaryPppNetworkMplsNcpNotPresent | 1.3.6.1.4.1.4874.2.2.11.1.7.86 | Integer32 | read-only | The total number of MPLS NCPs in the system configured on PPP network interfaces with an operational state of notPresent(3). |
| I32 juniPppSummaryPppNetworkMplsNcpNoResources | 1.3.6.1.4.1.4874.2.2.11.1.7.87 | Integer32 | read-only | The total number of MPLS NCPs in the system configured on PPP network interfaces with an operational state of noResources(4). |
| juniPppIpv6 | 1.3.6.1.4.1.4874.2.2.11.1.8 | |||
| juniPppIpv6Table | 1.3.6.1.4.1.4874.2.2.11.1.8.1 | not-accessible | Table containing the IPv6 parameters for the local PPP entity. | |
| juniPppIpv6Entry | 1.3.6.1.4.1.4874.2.2.11.1.8.1.1 | not-accessible | IPV6CP status information for a particular PPP link. | |
| JUN juniPppIpv6ServiceStatus | 1.3.6.1.4.1.4874.2.2.11.1.8.1.1.1 | JuniEnable | read-only | Indicates whether IPv6 protocol service is operating over this PPP link. Service is established on this link through means outside this MIB. |
| INT juniPppIpv6OperStatus | 1.3.6.1.4.1.4874.2.2.11.1.8.1.1.2 | INTEGER | read-only | The operational status of the IPv6 network protocol. If the value of this object is up then the finite state machine for the IPv6 network protocol has reached the Opened state. |
| INT juniPppIpv6TerminateReason | 1.3.6.1.4.1.4874.2.2.11.1.8.1.1.3 | INTEGER | read-only | Reason the IPV6CP link was terminated: none None. other Not specified. noService No IPv6 service configured on this PPP link. admin Administratively disabled. linkDown Underlying link is down. peerTerminated Peer initiated termination. peerRenegotiated Peer initiated renegotiation. maxRetriesExceeded Maximum number of config retries exceeded. negotiationFailure Failed to negotiate IPV6CP option. See juniPppIpv6TerminateNegFailOption. |
| INT juniPppIpv6TerminateNegFailOption | 1.3.6.1.4.1.4874.2.2.11.1.8.1.1.4 | INTEGER | read-only | Reports the PPP IPV6CP option for which negotiation failed, when juniPppIpv6TerminateReason has the value 'negotiationFailure'. |
| ADR juniPppIpv6LocalIpv6AddressIfIdentifier | 1.3.6.1.4.1.4874.2.2.11.1.8.1.1.5 | Ipv6AddressIfIdentifier | read-only | IPv6 Address Interface Identifier used by the local side. |
| ADR juniPppIpv6RemoteIpv6AddressIfIdentifier | 1.3.6.1.4.1.4874.2.2.11.1.8.1.1.6 | Ipv6AddressIfIdentifier | read-only | IPv6 Address Interface Identifier used by the remote side. |
| C32 juniPppIpv6NetworkStatusIpv6cpRenegoTerminates | 1.3.6.1.4.1.4874.2.2.11.1.8.1.1.7 | Counter32 | read-only | Number of times ipv6cp terminated due to peer exceeding max renegotiation attempts. |
| juniPppIpv6ConfigTable | 1.3.6.1.4.1.4874.2.2.11.1.8.2 | not-accessible | Table containing the IPv6 parameters for the local PPP entity. | |
| juniPppIpv6ConfigEntry | 1.3.6.1.4.1.4874.2.2.11.1.8.2.1 | not-accessible | IPV6CP configuration information for a particular PPP link. | |
| INT juniPppIpv6ConfigAdminStatus | 1.3.6.1.4.1.4874.2.2.11.1.8.2.1.1 | INTEGER | read-write | The immediate desired status of the IPv6 network protocol. Setting this object to open will inject an administrative open event into the IPv6 network protocol's finite state machine. Setting this object to close will inject an administrative close event into the IPv6 network protocol's finite state machine. |
| JUN juniPppIpv6ConfigInitiateIpv6 | 1.3.6.1.4.1.4874.2.2.11.1.8.2.1.2 | JuniEnable | read-write | Enables the initiation of negotiation of the IPv6CP. |
| I32 juniPppIpv6ConfigMaxIpv6cpRenegotiation | 1.3.6.1.4.1.4874.2.2.11.1.8.2.1.3 | Integer32 | read-write | Maximum number of allowed ipv6cp renegotiation attempts from peer. |
| juniPppGlobalConfig | 1.3.6.1.4.1.4874.2.2.11.1.9 | |||
| JUN juniPppPeerIpAddressOptional | 1.3.6.1.4.1.4874.2.2.11.1.9.1 | JuniEnable | read-write | This option is used to ignore the conflicts between ppp client�s requested IP address and radius/local pool returned address in server during IPNCP negotiation. Enabling this will ensure the IPNCP negotiation to succeed even though the client does not include IP address option in the IPNCP configure request. |
| juniPppConformance | 1.3.6.1.4.1.4874.2.2.11.4 | |||
| juniPppCompliances | 1.3.6.1.4.1.4874.2.2.11.4.1 | |||
| juniPppCompliance | 1.3.6.1.4.1.4874.2.2.11.4.1.1 | Obsolete compliance statement for entities which implement the Juniper PPP MIB. This statement became obsolete when additional objects were added to the MIB. | ||
| juniPppCompliance2 | 1.3.6.1.4.1.4874.2.2.11.4.1.2 | Obsolete compliance statement for entities which implement the Juniper PPP MIB. This statement became obsolete when the juniPppMlPppGroup and juniPppSummaryGroup objects were added. | ||
| juniPppCompliance3 | 1.3.6.1.4.1.4874.2.2.11.4.1.3 | Obsolete compliance statement for entities which implement the Juniper PPP MIB. This statement became obsolete when the juniPppLinkConfigStandardIfIndex object was added to the MIB. | ||
| juniPppCompliance4 | 1.3.6.1.4.1.4874.2.2.11.4.1.4 | Obsolete compliance statement for entities which implement the Juniper PPP MIB. This statement became obsolete when the juniPppMlPppGroup, juniPppSummaryLinkGroup and juniPppSummaryNetworkGroup were moved from the list of mandatory groups. | ||
| juniPppCompliance5 | 1.3.6.1.4.1.4874.2.2.11.4.1.5 | Obsolete compliance statement for entities which implement the Juniper PPP MIB. This statement became obsolete when new IP, LCP and multi-link objects were added. | ||
| juniPppCompliance6 | 1.3.6.1.4.1.4874.2.2.11.4.1.6 | Obsolete compliance statement for entities which implement the Juniper PPP MIB. This statement became obsolete when new juniPppLcpGroup and juniPppMlPppGroup objects were added. | ||
| juniPppCompliance7 | 1.3.6.1.4.1.4874.2.2.11.4.1.7 | Obsolete compliance statement for entities which implement the Juniper PPP MIB. This statement became obsolete when more new multi-link objects were added. | ||
| juniPppCompliance8 | 1.3.6.1.4.1.4874.2.2.11.4.1.8 | Obsolete compliance statement for entities which implement the Juniper PPP MIB. This statement became obsolete when IPv6 support was added. | ||
| juniPppCompliance9 | 1.3.6.1.4.1.4874.2.2.11.4.1.9 | Obsolete compliance statement for entities which implement the Juniper PPP MIB. This statement became obsolete when more new multi-link objects were added. | ||
| juniPppCompliance10 | 1.3.6.1.4.1.4874.2.2.11.4.1.10 | Obsolete compliance statement for entities which implement the Juniper PPP MIB. This statement became obsolete when more new juniPppSummary objects were added. | ||
| juniPppCompliance11 | 1.3.6.1.4.1.4874.2.2.11.4.1.11 | Obsolete compliance statement for entities which implement the Juniper PPP MIB. This statement became obsolete when a new multi-link object was added. | ||
| juniPppCompliance12 | 1.3.6.1.4.1.4874.2.2.11.4.1.12 | Obsolete compliance statement for entities which implement the Juniper PPP MIB. This statement became obsolete when more new juniPppLcpGroup and juniPppMlPppGroup objects were added. | ||
| juniPppCompliance13 | 1.3.6.1.4.1.4874.2.2.11.4.1.13 | The compliance statement for entities which implement the Juniper PPP MIB. This statement became obsolete when more new juniPppLcpGroup, juniPppIpGroup and juniPppIpv6Group objects were added. | ||
| juniPppCompliance14 | 1.3.6.1.4.1.4874.2.2.11.4.1.14 | The compliance statement for entities which implement the Juniper PPP MIB. | ||
| juniPppCompliance15 | 1.3.6.1.4.1.4874.2.2.11.4.1.15 | The compliance statement for entities which implement the Juniper PPP MIB. This statement was obsoleted when MCMP traffic class mapping was added. New group juniPppMlPppMulticlassTcGroup1 was added. | ||
| juniPppCompliance16 | 1.3.6.1.4.1.4874.2.2.11.4.1.16 | The compliance statement for entities which implement the Juniper PPP MIB. This statement was obsoleted when juniPppPeerIpAddressOptional was added. | ||
| juniPppCompliance17 | 1.3.6.1.4.1.4874.2.2.11.4.1.17 | The compliance statement for entities which implement the Juniper PPP MIB. | ||
| juniPppGroups | 1.3.6.1.4.1.4874.2.2.11.4.2 | |||
| juniPppLcpGroup | 1.3.6.1.4.1.4874.2.2.11.4.2.1 | Obsolete collection of objects providing management of link-layer functionality (LCP) of PPP interfaces in a Juniper product. This group became obsolete when additional objects were added. | ||
| juniPppIpGroup | 1.3.6.1.4.1.4874.2.2.11.4.2.2 | Obsolete collection of objects providing management of IP network control protocol functionality (IPCP) of PPP interfaces in a Juniper product. This group became obsolete when additional objects were added. | ||
| juniPppOsiGroup | 1.3.6.1.4.1.4874.2.2.11.4.2.3 | Obsolete collection of objects providing management of OSI network control protocol functionality (OSICP) of PPP interfaces in a Juniper product. This group became obsolete when additional objects were added. | ||
| juniPppLcpGroup2 | 1.3.6.1.4.1.4874.2.2.11.4.2.4 | Obsolete collection of objects providing management of link-layer functionality (LCP) of PPP interfaces in a Juniper product. This group became obsolete when the juniPppLinkConfigStandardIfIndex object was added. | ||
| juniPppIpGroup2 | 1.3.6.1.4.1.4874.2.2.11.4.2.5 | Obsolete collection of objects providing management of IP network control protocol functionality (IPCP) of PPP interfaces in a Juniper product. This group became obsolete when additional objects were added. | ||
| juniPppOsiGroup2 | 1.3.6.1.4.1.4874.2.2.11.4.2.6 | A collection of objects providing management of OSI network control protocol functionality (OSICP) of PPP interfaces in a Juniper product. | ||
| juniPppSessionGroup | 1.3.6.1.4.1.4874.2.2.11.4.2.7 | Obsolete collection of objects providing management of PPP session functionality of PPP interfaces in a Juniper product. This group became obsolete when IPv6 support was added. | ||
| juniPppMlPppGroup | 1.3.6.1.4.1.4874.2.2.11.4.2.8 | Obsolete collection of objects providing multi link PPP management support in a Juniper product. This group became obsolete when additional objects were added. | ||
| juniPppSummaryGroup | 1.3.6.1.4.1.4874.2.2.11.4.2.9 | Obsolete collection of objects providing PPP interface summary information in a Juniper product. This group became obsolete when it was divided into three groups so that the link and network object would not be manditory. | ||
| juniPppLcpGroup3 | 1.3.6.1.4.1.4874.2.2.11.4.2.10 | Obsolete collection of objects providing management of link-layer functionality (LCP) of PPP interfaces in a Juniper product. This group became obsolete when additional objects were added. | ||
| juniPppSummaryBasicGroup | 1.3.6.1.4.1.4874.2.2.11.4.2.11 | Obsolete collection of objects providing PPP interface basic summary information in a Juniper product. This group became obsolete when IPv6 support was added. | ||
| juniPppSummaryLinkGroup | 1.3.6.1.4.1.4874.2.2.11.4.2.12 | Obsolete collection of objects providing PPP interface basic summary information in a Juniper product. This group became obsolete when new objects were added. | ||
| juniPppSummaryNetworkGroup | 1.3.6.1.4.1.4874.2.2.11.4.2.13 | Obsolete collection of objects providing PPP interface network summary information in a Juniper product. This group became obsolete when IPv6 support was added. | ||
| juniPppLcpGroup4 | 1.3.6.1.4.1.4874.2.2.11.4.2.14 | Obsolete collection of objects providing management of link-layer functionality (LCP) of PPP interfaces in a Juniper product. This group became obsolete when additional objects were added. | ||
| juniPppIpGroup3 | 1.3.6.1.4.1.4874.2.2.11.4.2.15 | Obsolete collection of objects providing management of IP network control protocol functionality (IPCP) of PPP interfaces in a Juniper product. This group became obsolete when IPv6 support was added. | ||
| juniPppMlPppGroup2 | 1.3.6.1.4.1.4874.2.2.11.4.2.16 | Obsolete collection of objects providing multi link PPP management support in a Juniper product. This group became obsolete when additional objects were added. | ||
| juniPppMlPppGroup3 | 1.3.6.1.4.1.4874.2.2.11.4.2.17 | Obsolete collection of objects providing multi link PPP management support in a Juniper product. This group became obsolete when additional objects were added. | ||
| juniPppLcpGroup5 | 1.3.6.1.4.1.4874.2.2.11.4.2.18 | Obsolete collection of objects providing management of link-layer functionality (LCP) of PPP interfaces in a Juniper product. This group became obsolete when additional objects were added. | ||
| juniPppMlPppGroup4 | 1.3.6.1.4.1.4874.2.2.11.4.2.19 | Obsolete collection of objects providing multi link PPP management support in a Juniper product. This group became obsolete when additional objects were added. | ||
| juniPppSummaryBasicGroup2 | 1.3.6.1.4.1.4874.2.2.11.4.2.20 | Obsolete collection of objects providing PPP interface basic summary information in a Juniper product. This group became obsolete when new objects were added. | ||
| juniPppSummaryNetworkGroup2 | 1.3.6.1.4.1.4874.2.2.11.4.2.21 | Obsolete collection of objects providing PPP interface basic summary information in a Juniper product. This group became obsolete when new objects were added. | ||
| juniPppIpGroup4 | 1.3.6.1.4.1.4874.2.2.11.4.2.22 | A collection of objects providing management of IP network control protocol functionality (IPCP) of PPP interfaces in a Juniper product. This group became obsolete when additional objects were added | ||
| juniPppIpv6Group | 1.3.6.1.4.1.4874.2.2.11.4.2.23 | A collection of objects providing management of IPV6 network control protocol functionality (IPV6CP) of PPP interfaces in a Juniper product. This group became obsolete when additional objects were added. | ||
| juniPppSessionGroup2 | 1.3.6.1.4.1.4874.2.2.11.4.2.24 | A collection of objects providing management of PPP session functionality of PPP interfaces in a Juniper product. | ||
| juniPppMlPppGroup5 | 1.3.6.1.4.1.4874.2.2.11.4.2.25 | Obsolete collection of objects providing multi link PPP management support in a Juniper product. This group became obsolete when additional objects were added. | ||
| juniPppSummaryBasicGroup3 | 1.3.6.1.4.1.4874.2.2.11.4.2.26 | A collection of objects providing PPP interface basic summary information in a Juniper product. | ||
| juniPppSummaryLinkGroup2 | 1.3.6.1.4.1.4874.2.2.11.4.2.27 | A collection of objects providing PPP interface link summary information in a Juniper product. | ||
| juniPppSummaryNetworkGroup3 | 1.3.6.1.4.1.4874.2.2.11.4.2.28 | A collection of objects providing PPP interface network summary information in a Juniper product. | ||
| juniPppMlPppGroup6 | 1.3.6.1.4.1.4874.2.2.11.4.2.29 | Obsolete collection of objects providing multi link PPP management support in a Juniper product. This group became obsolete when additional objects were added. | ||
| juniPppLcpGroup6 | 1.3.6.1.4.1.4874.2.2.11.4.2.30 | Obsolete collection of objects providing management of link-layer functionality (LCP) of PPP interfaces in a Juniper product. This group became obsolete when additional objects were added. | ||
| juniPppMlPppGroup7 | 1.3.6.1.4.1.4874.2.2.11.4.2.31 | Obsolete collection of objects providing multi link PPP management support in a Juniper product. This group became obsolete when additional objects were added | ||
| juniPppLcpGroup7 | 1.3.6.1.4.1.4874.2.2.11.4.2.32 | A collection of objects providing management of link-layer functionality (LCP) of PPP interfaces in a Juniper product. This group became obsolete when additional objects were added. | ||
| juniPppMlPppGroup8 | 1.3.6.1.4.1.4874.2.2.11.4.2.33 | A collection of objects providing multi link PPP management support in a Juniper product. This was obsoleted when multiclass multilink support was added. | ||
| juniPppLcpGroup8 | 1.3.6.1.4.1.4874.2.2.11.4.2.34 | A collection of objects providing management of link-layer functionality (LCP) of PPP interfaces in a Juniper product. | ||
| juniPppIpGroup5 | 1.3.6.1.4.1.4874.2.2.11.4.2.35 | A collection of objects providing management of IP network control protocol functionality (IPCP) of PPP interfaces in a Juniper product.This group became obsolete when additional objects were added. | ||
| juniPppIpv6Group2 | 1.3.6.1.4.1.4874.2.2.11.4.2.36 | A collection of objects providing management of IPV6 network control protocol functionality (IPV6CP) of PPP interfaces in a Juniper product. | ||
| juniPppIpGroup6 | 1.3.6.1.4.1.4874.2.2.11.4.2.37 | A collection of objects providing management of IP network control protocol functionality (IPCP) of PPP interfaces in a Juniper product. This group became obsolete when juniPppPeerIpAddressOptional object added | ||
| juniPppMlPppGroup9 | 1.3.6.1.4.1.4874.2.2.11.4.2.38 | A collection of objects providing multi link PPP management support in a Juniper product. | ||
| juniPppMlPppMulticlassTcGroup1 | 1.3.6.1.4.1.4874.2.2.11.4.2.39 | A collection of object providing management of MCMP traffic class mapping functionality of PPP link interfaces in a Juniper product. | ||
| juniPppIpGroup7 | 1.3.6.1.4.1.4874.2.2.11.4.2.40 | A collection of objects providing management of IP network control protocol functionality (IPCP) of PPP interfaces in a Juniper product. |
RFC description
Juniper Networks MIB for managing PPP link parameters, authentication, and connection statistics on Juniper E-series routers.
Start monitoring Juniper Networks E-series router (PPP link/LCP/keepalive status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.