Juniper-V35-MIB

All MIBs › Juniper-V35-MIB

Organization: Juniper Networks, Inc.

Last Updated: 2002-09-16

Category: Domain: WAN, Network Interfaces, Vendor: Juniper

Description: Juniper Networks MIB for managing V.35 serial WAN interface parameters and statistics on Juniper E-series routers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Juniper-V35-MIB?

Juniper-V35-MIB is a Juniper Networks, Inc. proprietary MIB for the X.21/V.35 Server, configuring serial WAN interfaces. Its interface table, keyed by index, records interface type, mode, clock rate, NRZ-encoding flag, TX-clock source, ignore-DCD flag, and loopback mode. As a configuration MIB it lets an administrator confirm X.21/V.35 serial-line clocking and loopback settings on a Juniper router. It is deployed on Juniper Networks routers (X.21/V.35 serial interfaces). Engineers can download the Juniper-V35-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Juniper-V35-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Juniper Networks routers (X.21/V.35 serial interfaces)

Monitoring Examples

An administrator checks juniV35IfClockRate and juniV35IfTxClock to confirm serial-line clocking configuration on a Juniper router's V.35 interface.

What Can Be Monitored

V.35/X.21 serial interface clocking and loopback configuration

Imported Objects

From IF-MIB

InterfaceIndex

From Juniper-MIBs

juniMibs

MODULE-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

OIDs

OID symbolic	OID numeric	Type	Access	Description
juniV35MIB	1.3.6.1.4.1.4874.2.2.59			The X.21/V.35 Server MIB for the Juniper Networks enterprise.
juniV35Objects	1.3.6.1.4.1.4874.2.2.59.1
juniV35IfTable	1.3.6.1.4.1.4874.2.2.59.1.2		not-accessible	This table contains entries for X.21/V.35 interfaces present in the system. This table provides an extension to the Juniper-HDLC-MIB.juniHdlcIfTable for HDLC interfaces that support X.21/V.35 signalling.
juniV35IfEntry	1.3.6.1.4.1.4874.2.2.59.1.2.1		not-accessible	Each entry describes the characteristics of an X.21/V.35 interface.
NUM juniV35IfIndex	1.3.6.1.4.1.4874.2.2.59.1.2.1.1	InterfaceIndex	not-accessible	The ifIndex of the X.21/V.35 interface. It has the same value as the juniHdlcIfIndex for the common interface.
INT juniV35IfType	1.3.6.1.4.1.4874.2.2.59.1.2.1.2	INTEGER	read-only	Read only parameter of interface type X.21/V.35.
INT juniV35IfMode	1.3.6.1.4.1.4874.2.2.59.1.2.1.3	INTEGER	read-only	Read only parameter of interface mode of interface X.21/V.35 Data Terminating Equipment(DTE)/Data Communication Equipment(DCE).
U32 juniV35IfClockRate	1.3.6.1.4.1.4874.2.2.59.1.2.1.4	Unsigned32	read-write	The clock rate setting in hertz for this X.21/V.35 interface. Only the following values are valid: 1200, 2400, 4800, 9600, 19200, 38400, 56000, 64000, 128000, 1024000, 1536000, 2048000, 3072000, 4096000, 4915200, 6144000, and 8192000. If a value other than one of the predefined values is set, then the closest matching value is used. The clock rate parameter is only meaningful when the interface is in DCE mode. When the interface is in DTE mode, the value is simply ignored.
INT juniV35IfNrzEncoding	1.3.6.1.4.1.4874.2.2.59.1.2.1.5	INTEGER	read-write	The non-return-to-zero (NRZ) encoding for X.21/V.35 interface. Inverted encoding is provided with NRZI-encoding command, which is non-return-to-zero inverted (NRZI) encoding.
INT juniV35IfTxClock	1.3.6.1.4.1.4874.2.2.59.1.2.1.6	INTEGER	read-write	There is an option of inverting the transmit clock signal for X.21/V.35 interface. Inverting the tranmit clock is used to compensate for skews between the clock and data when transmitting across long cables at fast data rates.
INT juniV35IfIgnoreDcd	1.3.6.1.4.1.4874.2.2.59.1.2.1.7	INTEGER	read-write	When in X.21/V.35 DTE mode we have the capability of ignoring the DCD signal in determining whether or not an interface is up.
INT juniV35IfLoopback	1.3.6.1.4.1.4874.2.2.59.1.2.1.8	INTEGER	read-write	Loopback interface is configured (or not) for X.21/V.35 interface
juniV35Conformance	1.3.6.1.4.1.4874.2.2.59.4
juniV35Compliances	1.3.6.1.4.1.4874.2.2.59.4.1
juniV35Compliance	1.3.6.1.4.1.4874.2.2.59.4.1.1			The compliance statement for entities that implement the Juniper X.21/V.35 MIB.
juniV35Groups	1.3.6.1.4.1.4874.2.2.59.4.2
juniV35Group	1.3.6.1.4.1.4874.2.2.59.4.2.1			A collection of objects providing management of X.21/V.35 interfaces in a Juniper product.

RFC description

Juniper vendor MIB for V35 interface management on routing and switching platforms; supports V.35 WAN serial interface monitoring.

Start monitoring Juniper Networks router (X.21/V.35 serial interfaces) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Juniper-V35-MIB

What Is Juniper-V35-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description