Juniper-DHCP-MIB

All MIBs › Juniper-DHCP-MIB

Organization: Juniper Networks, Inc.

Last Updated: 2007-01-31

Category: Domain: Subscriber Management, Protocol: DHCP, Vendor: Juniper

Description: Provides managed objects for DHCP server pool management, lease tracking, and relay statistics on Juniper Networks E-series broadband routers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Juniper-DHCP-MIB?

Juniper-DHCP-MIB is a Juniper Networks enterprise MIB covering DHCP relay and proxy functionality on Juniper E-series (ERX) broadband edge routers. It exposes configuration and operational data for DHCP relay agent option-82 handling (circuit ID, remote ID, hostname, VR-name insertion) plus counters for relay errors such as bad messages, unknown messages, and gateway-address spoofing attempts. Rather than hardware health, this MIB is primarily useful for monitoring software/protocol-level status — the health of the DHCP relay/proxy service, its configuration state, and fault counters indicating malformed or malicious DHCP traffic at the network edge. It builds on standard IETF DHCP concepts (RFC 2131, option-82/RFC 3046) but defines Juniper-proprietary object identifiers rather than reusing a standard DHCP MIB. It is typically deployed by broadband/ISP operators monitoring subscriber-facing DHCP relay behavior on Juniper E-series routers. Engineers can download the Juniper-DHCP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Juniper-DHCP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Juniper Networks E-series (ERX) broadband routers

Monitoring Examples

An administrator would poll juniDhcpRelayBadMessages and juniDhcpRelayUnknownMessages to detect malformed DHCP traffic arriving at a relay interface, and check juniDhcpRelayGatewayAddrSpoofs to catch spoofing attempts on subscriber-facing ports. Scalars like juniDhcpRelayAgentCircuitIdEnable and juniDhcpRelayAgentRemoteIdEnable confirm whether option-82 sub-options are inserted correctly for subscriber identification. A rising juniDhcpRelayAgentInfoAlreadyPresents counter would flag double-insertion issues from downstream relay devices.

What Can Be Monitored

DHCP relay agent option-82 settings
bad/unknown DHCP messages
gateway address spoofing attempts
circuit ID/remote ID insertion status
DHCP proxy forwarding counters

Imported Objects

From IF-MIB

InterfaceIndex

From Juniper-MIBs

juniMibs

MODULE-IDENTITY

From Juniper-ROUTER-MIB

juniRouterName

OBJECT-TYPE

From Juniper-TC

JuniEnable
JuniInterfaceLocation
JuniLogSeverity

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString
PhysAddress
RowStatus
TEXTUAL-CONVENTION
TimeInterval
TruthValue

How to Use in IPNetwork Monitor

Example using juniDhcpRelayBadMessages OID:

Select a Juniper Networks E-series (ERX) broadband router (DHCP relay/proxy) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type juniDhcpRelayBadMessages into the Find box to locate it in the OID tree, then select it and click OK. It reports the number of received DHCP relay messages that were discarded because their message operation (e.g. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases between polls, since a rising count of errors, failures, or discards often points to a real underlying problem. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
juniDhcpCompliance	1.3.6.1.4.1.4874.2.2.22.4.1.3			Obsolete compliance statement for systems supporting DHCP. This compliance statement became obsolete when support was added for reservations and cable modem servers.
juniDhcpCompliance10	1.3.6.1.4.1.4874.2.2.22.4.1.12			The compliance statement for systems supporting DHCP.
juniDhcpCompliance11	1.3.6.1.4.1.4874.2.2.22.4.1.13			The compliance statement for systems supporting DHCP.
juniDhcpCompliance12	1.3.6.1.4.1.4874.2.2.22.4.1.14			The compliance statement for systems supporting DHCP.
juniDhcpCompliance2	1.3.6.1.4.1.4874.2.2.22.4.1.4			Obsolete compliance statement for systems supporting DHCP. This compliance statement became obsolete when support was added for adding host name or virtual router name to relay agent option 82.
juniDhcpCompliance3	1.3.6.1.4.1.4874.2.2.22.4.1.5			Obsolete compliance statement for systems supporting DHCP. This compliance statement became obsolete when support was added for excluding the subinterface ID from relay agent option 82.
juniDhcpCompliance4	1.3.6.1.4.1.4874.2.2.22.4.1.6			Obsolete compliance statement for systems supporting DHCP. This compliance statement became obsolete when support was added for DHCP local address pool utilizations support.
juniDhcpCompliance5	1.3.6.1.4.1.4874.2.2.22.4.1.7			Obsolete compliance statement for systems supporting DHCP. This compliance statement became obsolete when support was added for the DHCP Relay Trust-all mode.
juniDhcpCompliance6	1.3.6.1.4.1.4874.2.2.22.4.1.8			Obsolete compliance statement for systems supporting DHCP. This compliance statement became obsolete when support was added to administratively delete entries in juniDhcpLocalServerBindingsTable.
juniDhcpCompliance7	1.3.6.1.4.1.4874.2.2.22.4.1.9			Obsolete compliance statement for systems supporting DHCP.
juniDhcpCompliance8	1.3.6.1.4.1.4874.2.2.22.4.1.10			Obsolete compliance statement for systems supporting DHCP. This compliance statement became obsolete when support was added for new DHCP Relay statistics in juniDhcpRelayScalars.
juniDhcpCompliance9	1.3.6.1.4.1.4874.2.2.22.4.1.11			Obsolete compliance statement for systems supporting DHCP.
juniDhcpLocalServerAttributes	1.3.6.1.4.1.4874.2.2.22.1.3.4
JUN juniDhcpLocalServerAttributesMode	1.3.6.1.4.1.4874.2.2.22.1.3.4.1	JuniDhcpLocalServerModeType	read-only	An object representing the mode in which the DHCP Local Server is operating.
C32 juniDhcpLocalServerBadMessages	1.3.6.1.4.1.4874.2.2.22.1.3.1.13	Counter32	read-only	The number of bad messages processed by this local server. This object is deprecated and will return 0.
juniDhcpLocalServerBindings	1.3.6.1.4.1.4874.2.2.22.1.3.2
juniDhcpLocalServerBindingsEntry	1.3.6.1.4.1.4874.2.2.22.1.3.2.1.1		not-accessible	An entry (conceptual row) representing an address binding maintained by this DHCP Local Server.
U32 juniDhcpLocalServerBindingsExpireTime	1.3.6.1.4.1.4874.2.2.22.1.3.2.1.1.4	Unsigned32	read-only	If juniDhcpLocalServerBindingsInfinite is false, then this is the time remaining prior to expiration of the address binding associated with this entry.
T/F juniDhcpLocalServerBindingsInfinite	1.3.6.1.4.1.4874.2.2.22.1.3.2.1.1.3	TruthValue	read-only	If true, then this binding will be maintained indefinitely. If false, then this binding will expire in accordance with the value of juniDhcpLocalServerBindingsExpireTime.
DAT juniDhcpLocalServerBindingsInitialLeaseStartTime	1.3.6.1.4.1.4874.2.2.22.1.3.2.1.1.8	DateAndTime	read-only	The initial time the lease was offered.
IP juniDhcpLocalServerBindingsIpAddress	1.3.6.1.4.1.4874.2.2.22.1.3.2.1.1.1	IpAddress	not-accessible	The IP Address associated with this entry in the bindings table.
U32 juniDhcpLocalServerBindingsLeaseInterval	1.3.6.1.4.1.4874.2.2.22.1.3.2.1.1.6	Unsigned32	read-only	If juniDhcpLocalServerBindingsInfinite is false, then this object is the time, in seconds, of the current lease.
DAT juniDhcpLocalServerBindingsLeaseStartTime	1.3.6.1.4.1.4874.2.2.22.1.3.2.1.1.7	DateAndTime	read-only	The time the current lease was started.
PHY juniDhcpLocalServerBindingsPhysAddress	1.3.6.1.4.1.4874.2.2.22.1.3.2.1.1.2	PhysAddress	read-only	The Physical (MAC) Address associated with this entry in the bindings table and corresponding to the IP Address denoted by the table index.
ROW juniDhcpLocalServerBindingsRowStatus	1.3.6.1.4.1.4874.2.2.22.1.3.2.1.1.5	RowStatus	read-write	Entries in this table are created only via DHCP operation, never via SNMP. Has the value active(1) when an entry exists. Set to destroy(6) to cause this IP address binding and user-specific routes to be removed. The effect is the same as if the user had released his address binding, or his address lease had expired. No other RowStatus enumeration values are supported.
juniDhcpLocalServerBindingsTable	1.3.6.1.4.1.4874.2.2.22.1.3.2.1		not-accessible	A table of address bindings maintained by this DHCP Local Server.
C32 juniDhcpLocalServerCableModemPacketsDropped	1.3.6.1.4.1.4874.2.2.22.1.3.7.12	Counter32	read-only	The number of Cable Modem DHCP Packets dropped.
C32 juniDhcpLocalServerCableModemPacketsIn	1.3.6.1.4.1.4874.2.2.22.1.3.7.10	Counter32	read-only	The number of Cable Modem DHCP Packets received.
C32 juniDhcpLocalServerCableModemPacketsOut	1.3.6.1.4.1.4874.2.2.22.1.3.7.11	Counter32	read-only	The number of Cable Modem DHCP Packets transmitted.
C32 juniDhcpLocalServerCableModemRequestBad	1.3.6.1.4.1.4874.2.2.22.1.3.7.7	Counter32	read-only	The number of Cable Modem DHCP Client Request that are bad.
C32 juniDhcpLocalServerCableModemRequestDeleted	1.3.6.1.4.1.4874.2.2.22.1.3.7.9	Counter32	read-only	The number of Cable Modem DHCP Requests that were deleted because they were stale.
C32 juniDhcpLocalServerCableModemRequestDropped	1.3.6.1.4.1.4874.2.2.22.1.3.7.5	Counter32	read-only	The number of Cable Modem DHCP Client Request that are dropped.
C32 juniDhcpLocalServerCableModemRequestIn	1.3.6.1.4.1.4874.2.2.22.1.3.7.1	Counter32	read-only	The number of Cable Modem DHCP Client Requests that are received.
C32 juniDhcpLocalServerCableModemRequestOut	1.3.6.1.4.1.4874.2.2.22.1.3.7.3	Counter32	read-only	The number of Cable Modem DHCP Client Request that are transmitted.
C32 juniDhcpLocalServerCableModemResponseBad	1.3.6.1.4.1.4874.2.2.22.1.3.7.8	Counter32	read-only	The number of Cable Modem DHCP Server Responses that are bad.
C32 juniDhcpLocalServerCableModemResponseDropped	1.3.6.1.4.1.4874.2.2.22.1.3.7.6	Counter32	read-only	The number of Cable Modem DHCP Server Responses that are dropped.
C32 juniDhcpLocalServerCableModemResponseIn	1.3.6.1.4.1.4874.2.2.22.1.3.7.2	Counter32	read-only	The number of Cable Modem DHCP Server Responses that are received.
C32 juniDhcpLocalServerCableModemResponseOut	1.3.6.1.4.1.4874.2.2.22.1.3.7.4	Counter32	read-only	The number of Cable Modem DHCP Server Responses that are transmitted.
juniDhcpLocalServerCableModemServerEntry	1.3.6.1.4.1.4874.2.2.22.1.3.6.1.1		not-accessible	An entry (conceptual row) representing a DHCP Cable Modem DHCP server.
IP juniDhcpLocalServerCableModemServerEntryAddress	1.3.6.1.4.1.4874.2.2.22.1.3.6.1.1.1	IpAddress	not-accessible	The IP address of the DHCP server to which DHCP requests received from attached Cable Modem DHCP clients are forwarded.
ROW juniDhcpLocalServerCableModemServerEntryRowStatus	1.3.6.1.4.1.4874.2.2.22.1.3.6.1.1.2	RowStatus	read-create	Supports 'createAndGo' and 'destroy' only.
juniDhcpLocalServerCableModemServers	1.3.6.1.4.1.4874.2.2.22.1.3.6
juniDhcpLocalServerCableModemServerTable	1.3.6.1.4.1.4874.2.2.22.1.3.6.1		not-accessible	The (conceptual) table listing the DHCP Cable Modem Relay servers.
juniDhcpLocalServerCableModemStatistics	1.3.6.1.4.1.4874.2.2.22.1.3.7
NTF juniDhcpLocalServerDuplicateClient	1.3.6.1.4.1.4874.2.2.22.1.3.0.10			Reports the first occurance of detection of a DHCP client that changed interfaces.
JUN juniDhcpLocalServerEventSeverity	1.3.6.1.4.1.4874.2.2.22.2.1	JuniLogSeverity	accessible-for-notify	The syslog severity of this server health event
STR juniDhcpLocalServerEventString	1.3.6.1.4.1.4874.2.2.22.2.2	DisplayString	accessible-for-notify	The text of the event string associated with the server health event
juniDhcpLocalServerGroup	1.3.6.1.4.1.4874.2.2.22.4.2.3			Obsolete basic collection of objects providing management of DHCP Local Server functionality. This group became obsolete when support was added for reservations and cable modem servers.
juniDhcpLocalServerGroup2	1.3.6.1.4.1.4874.2.2.22.4.2.4			Obsolete basic collection of objects providing management of DHCP Local Server functionality. This group became obsolete when support was added for DHCP local pool utilization.
juniDhcpLocalServerGroup3	1.3.6.1.4.1.4874.2.2.22.4.2.9			The basic collection of objects providing management of DHCP Local Server functionality.
juniDhcpLocalServerGroup4	1.3.6.1.4.1.4874.2.2.22.4.2.11			Deprecated DHCP Local Server group of objects providing management of DHCP Local Server functionality. This object became deprecated when the Duplicate Client trap was added
juniDhcpLocalServerGroup5	1.3.6.1.4.1.4874.2.2.22.4.2.13			Obsolete basic collection of objects providing management of DHCP Local Server functionality.
juniDhcpLocalServerGroup6	1.3.6.1.4.1.4874.2.2.22.4.2.14			Obsolete basic collection of objects providing management of DHCP Local Server functionality.
juniDhcpLocalServerGroup7	1.3.6.1.4.1.4874.2.2.22.4.2.21			Obsolete the basic collection of objects providing management of DHCP Local Server functionality. This group has been obsoleted when support for DHCP Option 60 feature was added to achieve the obsoleted cable-modem functionality.
juniDhcpLocalServerGroup8	1.3.6.1.4.1.4874.2.2.22.4.2.23			The basic collection of objects providing management of DHCP Local Server functionality.
NTF juniDhcpLocalServerHealth	1.3.6.1.4.1.4874.2.2.22.1.3.0.4			Reports when a health event occurs in the DhcpLocalServer application on the router identified by juniRouterName.
JUN juniDhcpLocalServerInhibitRoaming	1.3.6.1.4.1.4874.2.2.22.1.3.4.4	JuniEnable	read-write	An object representing the mode in which the DHCP Local Server is operating as it pertains to roaming clients.
NTF juniDhcpLocalServerInterfaceLimitAbated	1.3.6.1.4.1.4874.2.2.22.1.3.0.9			Reports when the number of clients on a subinterface has fallen below the limit allowed on that subinterface.
NTF juniDhcpLocalServerInterfaceLimitExceeded	1.3.6.1.4.1.4874.2.2.22.1.3.0.8			Reports when a subinterface has exceeded the limit of clients allowed on that subinterface.
STR juniDhcpLocalServerInterfaceString	1.3.6.1.4.1.4874.2.2.22.2.4	DisplayString	accessible-for-notify	The interface where the DHCP client was detected
STR juniDhcpLocalServerLastDetected	1.3.6.1.4.1.4874.2.2.22.2.5	DisplayString	accessible-for-notify	The time the duplicate client was last detected
STR juniDhcpLocalServerMacAddress	1.3.6.1.4.1.4874.2.2.22.2.3	JuniDhcpLocalServerPhysAddressString	accessible-for-notify	The MAC address of the client that changed interfaces.
C32 juniDhcpLocalServerMemUsage	1.3.6.1.4.1.4874.2.2.22.1.3.1.1	Counter32	read-only	The amount (in bytes) of memory currently allocated to this local server.
C32 juniDhcpLocalServerNumBindings	1.3.6.1.4.1.4874.2.2.22.1.3.1.2	Counter32	read-only	The number of address bindings maintained by this local server.
juniDhcpLocalServerObjects	1.3.6.1.4.1.4874.2.2.22.1.3
C32 juniDhcpLocalServerPacketsIn	1.3.6.1.4.1.4874.2.2.22.1.3.1.14	Counter32	read-only	The number of input packets processed by this local server.
C32 juniDhcpLocalServerPacketsOut	1.3.6.1.4.1.4874.2.2.22.1.3.1.15	Counter32	read-only	The number of output packets processed by this local server.
juniDhcpLocalServerPool	1.3.6.1.4.1.4874.2.2.22.1.3.3
NTF juniDhcpLocalServerPoolAbatedAddrUtil	1.3.6.1.4.1.4874.2.2.22.1.3.0.2			Reports when the address pool utilization has fallen to the configured abated threshold level. See the DESCRIPTIONs for the juniDhcpLocalServerPoolTable elements for details on what conditions trigger a abated pool utilization notification.
I32 juniDhcpLocalServerPoolAbatedUtilThreshold	1.3.6.1.4.1.4874.2.2.22.1.3.3.1.1.16	Integer32	read-create	The value of address pool utilization that is used to determine when to generate an abated address pool utilization event notification to the management entity on this system. The value of this object must be less than the value of the juniDhcpLocalServerPoolHighUtilThreshold. The abated address pool utilization event is sent once if the high address pool utilization threshold is reached and utilization falls to the value of this object. The following pseudo-code states when abated address pool utilization notification will be generated comparing this object value to the value of juniDhcpLocalServerPoolUtilPct object. Address pool utilization state will be set to 'ok' when the pool was created first time and after that it will only be set in the context of and while triggering high and abated threshold notifications. if ( percentageOfAddressPoolUtil >= percentageOfAddressPoolAbatedUtilThreshold ) { if ( addressPoolUtilState == addressPoolUtilStateWarning ) { addressPoolUtilState = addressPoolUtilStateOk; if ( addressPoolUtilTrapsEnabled ) triggerAddressPoolAbatedUtilTrap(); } }
JUN juniDhcpLocalServerPoolDomainName	1.3.6.1.4.1.4874.2.2.22.1.3.3.1.1.2	JuniDhcpLocalServerPoolDomainName	read-create	The domain name assigned to this local server pool. Modification of extant values for this object require that it first be cleared (via set to null string) and then modified (via set to new string).
juniDhcpLocalServerPoolEntry	1.3.6.1.4.1.4874.2.2.22.1.3.3.1.1		not-accessible	An entry (conceptual row) representing an address pool associated this DHCP Local Server.
juniDhcpLocalServerPoolGroup	1.3.6.1.4.1.4874.2.2.22.1.3.8
NTF juniDhcpLocalServerPoolGroupAbatedAddrUtil	1.3.6.1.4.1.4874.2.2.22.1.3.0.6			Reports when the address pool group utilization has fallen to the configured abated threshold level. See the DESCRIPTIONs for the juniDhcpLocalServerPoolTable elements for details on what conditions trigger a abated pool group utilization notification.
juniDhcpLocalServerPoolGroupEntry	1.3.6.1.4.1.4874.2.2.22.1.3.8.1.1		not-accessible	An entry (conceptual row) representing an address pool group associated this DHCP Local Server.
NTF juniDhcpLocalServerPoolGroupHighAddrUtil	1.3.6.1.4.1.4874.2.2.22.1.3.0.5			Reports when the address pool group utilization has reached the configured high utilization threshold. See the DESCRIPTIONs for the juniDhcpLocalServerPoolTable elements for details on what conditions trigger a high pool group utilization notification.
I32 juniDhcpLocalServerPoolGroupInUse	1.3.6.1.4.1.4874.2.2.22.1.3.8.1.1.3	Integer32	accessible-for-notify	Total number of addresses in use for pool group for utilization events.
JUN juniDhcpLocalServerPoolGroupName	1.3.6.1.4.1.4874.2.2.22.1.3.8.1.1.1	JuniDhcpLocalServerPoolGroupName	not-accessible	The name of the local server pool group to which this entry belongs.
NTF juniDhcpLocalServerPoolGroupNoAddresses	1.3.6.1.4.1.4874.2.2.22.1.3.0.7			Reports when the address pool group has exhausted its supply of addresses. This trap is issued every time a request is made to allocate an address from a fully utilized pool. See the DESCRIPTIONs for the juniDhcpLocalServerPoolTable elements for details on what conditions trigger a no address pool group utilization notification.
I32 juniDhcpLocalServerPoolGroupSize	1.3.6.1.4.1.4874.2.2.22.1.3.8.1.1.2	Integer32	accessible-for-notify	Total number of addresses in the pool group for utilization events.
juniDhcpLocalServerPoolGroupTable	1.3.6.1.4.1.4874.2.2.22.1.3.8.1		not-accessible	A table of address pool groups associated this DHCP Local Server. A DHCP Local Server may have multiple uniquely-named pool groups configured. This table is only used for pool group traps.
I32 juniDhcpLocalServerPoolGroupUtilPct	1.3.6.1.4.1.4874.2.2.22.1.3.8.1.1.4	Integer32	accessible-for-notify	Percentage of pool addresses in use for pool group for utilization events.
NTF juniDhcpLocalServerPoolHighAddrUtil	1.3.6.1.4.1.4874.2.2.22.1.3.0.1			Reports when the address pool utilization has reached the configured high utilization threshold. See the DESCRIPTIONs for the juniDhcpLocalServerPoolTable elements for details on what conditions trigger a high pool utilization notification.
I32 juniDhcpLocalServerPoolHighUtilThreshold	1.3.6.1.4.1.4874.2.2.22.1.3.3.1.1.15	Integer32	read-create	The value of address pool utilization, where if reached for the first time, will generate a high address pool utilization event to the management entity on this system. The value of this object must be greater than the value of juniDhcpLocalServerPoolAbatedUtilThreshold. The following pseudo-code states when high address pool utilization notification will be generated comparing this object value to the value of juniDhcpLocalServerPoolUtilPct object. Address pool utilization state will be set to 'ok' when the pool was created first time and after that it will only be set in the context of and while triggering high and abated threshold notifications. if ( percentageOfAddressPoolUtil >= percentageOfAddressPoolHighUtilThreshold ) { if ( addressPoolUtilState == addressPoolUtilStateOk ) { addressPoolUtilState = addressPoolUtilStateWarning; if ( addressPoolUtilTrapsEnabled ) triggerAddressPoolHighUtilTrap(); } }
I32 juniDhcpLocalServerPoolInUse	1.3.6.1.4.1.4874.2.2.22.1.3.3.1.1.19	Integer32	accessible-for-notify	The number of addresses currently allocated from this pool.
NUM juniDhcpLocalServerPoolLeaseTime	1.3.6.1.4.1.4874.2.2.22.1.3.3.1.1.6	TimeInterval	read-create	The time interval for address renewal required of a client using the address associated with this local server pool entry. Setting a zero value will effect an infinite lease, which in turn is indicated by the value -1 returned via a get.
JUN juniDhcpLocalServerPoolLinkName	1.3.6.1.4.1.4874.2.2.22.1.3.3.1.1.14	JuniDhcpLocalServerPoolName	read-create	The name of this local server pool's backup pool.
JUN juniDhcpLocalServerPoolName	1.3.6.1.4.1.4874.2.2.22.1.3.3.1.1.1	JuniDhcpLocalServerPoolName	not-accessible	The name of the local server pool to which this entry belongs. Only an entry with the name 'default' may have a network address and mask assigned.
JUN juniDhcpLocalServerPoolNetBiosNodeType	1.3.6.1.4.1.4874.2.2.22.1.3.3.1.1.5	JuniDhcpLocalServerPoolNetBiosNodeType	read-create	The NetBios node type assigned to this local server pool.
IP juniDhcpLocalServerPoolNetworkIpAddress	1.3.6.1.4.1.4874.2.2.22.1.3.3.1.1.3	IpAddress	read-create	The IP Address assigned to this local server pool. This object must be set in conjunction with juniDhcpLocalServerPoolNetworkMask. Modification of extant values for this object require that it first be cleared (via set to null IP address) and then modified (via set to new IP address). Only configurable/valid for entries with the index name (juniDhcpLocalServerPoolName) 'default'.
IP juniDhcpLocalServerPoolNetworkMask	1.3.6.1.4.1.4874.2.2.22.1.3.3.1.1.4	IpAddress	read-create	The network mask assigned to this local server pool. This object must be set in conjunction with juniDhcpLocalServerPoolNetworkIpAddress. Modification of extant values for this object require that it first be cleared (via set to null IP mask) and then modified (via set to new IP mask). Only configurable/valid for entries with the index name (juniDhcpLocalServerPoolName) 'default'.
NTF juniDhcpLocalServerPoolNoAddresses	1.3.6.1.4.1.4874.2.2.22.1.3.0.3			Reports when the address pool has exhausted its supply of addresses. This trap is issued every time a request is made to allocate an address from a fully utilized pool. See the DESCRIPTIONs for the juniDhcpLocalServerPoolTable elements for details on what conditions trigger a no address pool utilization notification.
IP juniDhcpLocalServerPoolPrimaryDefaultRouter	1.3.6.1.4.1.4874.2.2.22.1.3.3.1.1.11	IpAddress	read-create	The address of the primary Default Router associated with this local server pool. This object must be set in conjunction with juniDhcpLocalServerPoolSecondaryDefaultRouter. Modification of extant values for this object require that it first be cleared (via set to null IP address) and then modified (via set to new IP address).
IP juniDhcpLocalServerPoolPrimaryDnsServer	1.3.6.1.4.1.4874.2.2.22.1.3.3.1.1.7	IpAddress	read-create	The address of the primary DNS Server associated with this local server pool. This object must be set in conjunction with juniDhcpLocalServerPoolSecondaryDnsServer. Modification of extant values for this object require that it first be cleared (via set to null IP address) and then modified (via set to new IP address).
IP juniDhcpLocalServerPoolPrimaryNetBiosNameServer	1.3.6.1.4.1.4874.2.2.22.1.3.3.1.1.9	IpAddress	read-create	The address of the primary NetBios Name Server associated with this local server pool. This object must be set in conjunction with juniDhcpLocalServerPoolSecondaryNetBiosNameServer. Modification of extant values for this object require that it first be cleared (via set to null IP address) and then modified (via set to new IP address).
ROW juniDhcpLocalServerPoolRowStatus	1.3.6.1.4.1.4874.2.2.22.1.3.3.1.1.13	RowStatus	read-create	Supports 'createAndGo' and 'destroy' only.
IP juniDhcpLocalServerPoolSecondaryDefaultRouter	1.3.6.1.4.1.4874.2.2.22.1.3.3.1.1.12	IpAddress	read-create	The address of the secondary Default Router associated with this local server pool. This object must be set in conjunction with juniDhcpLocalServerPoolPrimaryDefaultRouter. Modification of extant values for this object require that it first be cleared (via set to null IP address) and then modified (via set to new IP address).
IP juniDhcpLocalServerPoolSecondaryDnsServer	1.3.6.1.4.1.4874.2.2.22.1.3.3.1.1.8	IpAddress	read-create	The address of the secondary DNS Server associated with this local server pool. This object must be set in conjunction with juniDhcpLocalServerPoolPrimaryDnsServer. Modification of extant values for this object require that it first be cleared (via set to null IP address) and then modified (via set to new IP address).
IP juniDhcpLocalServerPoolSecondaryNetBiosNameServer	1.3.6.1.4.1.4874.2.2.22.1.3.3.1.1.10	IpAddress	read-create	The address of the secondary NetBios Name Server associated with this local server pool. This object must be set in conjunction with juniDhcpLocalServerPoolPrimaryNetBiosNameServer. Modification of extant values for this object require that it first be cleared (via set to null IP address) and then modified (via set to new IP address).
I32 juniDhcpLocalServerPoolSharedInUse	1.3.6.1.4.1.4874.2.2.22.1.3.3.1.1.21	Integer32	read-only	The number of addresses currently allocated from this pool to an application other than DHCP.
I32 juniDhcpLocalServerPoolSize	1.3.6.1.4.1.4874.2.2.22.1.3.3.1.1.20	Integer32	accessible-for-notify	The number of addresses available in this pool.
juniDhcpLocalServerPoolTable	1.3.6.1.4.1.4874.2.2.22.1.3.3.1		not-accessible	A table of address pools associated this DHCP Local Server. A DHCP Local Server may have multiple uniquely-named pools configured; however, only a single pool (with the name 'default') may have a network address and mask assigned.
T/F juniDhcpLocalServerPoolTrapEnable	1.3.6.1.4.1.4874.2.2.22.1.3.3.1.1.18	TruthValue	read-create	The configuration setting for address pool notifications. Setting this object to true(1) will enable the sending of address pool event notifications to the management entity on this device. Setting this object to false(2) will disable event notification reports.
juniDhcpLocalServerPoolTrapGroup	1.3.6.1.4.1.4874.2.2.22.4.2.10			Deprecated notifications providing alarms for high pool utilization and pool exhaustion of DHCP local address pools. This was deprecated when the roaming client trap was added.
juniDhcpLocalServerPoolTrapGroup2	1.3.6.1.4.1.4874.2.2.22.4.2.15			Obsolete notifications providing alarms for high pool utilization and pool exhaustion of DHCP local address pools and interface limit events.
I32 juniDhcpLocalServerPoolUtilPct	1.3.6.1.4.1.4874.2.2.22.1.3.3.1.1.17	Integer32	read-only	The current address utilization for this pool. When all the addresses in the pool are exhausted this object value becomes 100, i.e, poolUtil = 100%. When the pool reaches this stage, there won't be anymore addresses available from the pool. Any attempt to allocate an address from the pool will each time result in a juniDhcpLocalServerPoolNoAddresses notification.
juniDhcpLocalServerProxyTraps	1.3.6.1.4.1.4874.2.2.22.1.2.0
juniDhcpLocalServerRelayTraps	1.3.6.1.4.1.4874.2.2.22.1.1.0
juniDhcpLocalServerReserves	1.3.6.1.4.1.4874.2.2.22.1.3.5
juniDhcpLocalServerReservesEntry	1.3.6.1.4.1.4874.2.2.22.1.3.5.1.1		not-accessible	An entry (conceptual row) representing an MAC address, IP address, pool name reservation maintained by this DHCP Local Server.
IP juniDhcpLocalServerReservesEntryIpAddress	1.3.6.1.4.1.4874.2.2.22.1.3.5.1.1.1	IpAddress	not-accessible	The IP Address associated with this entry in reserves table.
STR juniDhcpLocalServerReservesEntryPhysAddress	1.3.6.1.4.1.4874.2.2.22.1.3.5.1.1.3	JuniDhcpLocalServerPhysAddressString	read-create	The physical (MAC) address string associated with this entry in the reserves table and corresponding to the IP Address denoted by the table index.
JUN juniDhcpLocalServerReservesEntryPoolName	1.3.6.1.4.1.4874.2.2.22.1.3.5.1.1.2	JuniDhcpLocalServerPoolName	read-create	The name of the local server pool associated with this entry in the reserves table and corresponding to the IP Address denoted by the table index.
ROW juniDhcpLocalServerReservesEntryRowStatus	1.3.6.1.4.1.4874.2.2.22.1.3.5.1.1.4	RowStatus	read-create	Supports 'createAndGo' and 'destroy' only.
juniDhcpLocalServerReservesTable	1.3.6.1.4.1.4874.2.2.22.1.3.5.1		not-accessible	A table of pool name, MAC address, and IP address reservation groups that are maintained by this DHCP Local Server.
C32 juniDhcpLocalServerRxAccepts	1.3.6.1.4.1.4874.2.2.22.1.3.1.4	Counter32	read-only	The number of accept messages received by this local server.
C32 juniDhcpLocalServerRxDeclines	1.3.6.1.4.1.4874.2.2.22.1.3.1.6	Counter32	read-only	The number of decline messages received by this local server.
C32 juniDhcpLocalServerRxDiscovers	1.3.6.1.4.1.4874.2.2.22.1.3.1.3	Counter32	read-only	The number of discover messages received by this local server.
C32 juniDhcpLocalServerRxInDiscards	1.3.6.1.4.1.4874.2.2.22.1.3.1.19	Counter32	read-only	The number of packets received by this local server that can not be processed due to system resource issues.
C32 juniDhcpLocalServerRxInErrors	1.3.6.1.4.1.4874.2.2.22.1.3.1.18	Counter32	read-only	The number of packets received by this local server that can not be processed due to protocol or configuration errors.
C32 juniDhcpLocalServerRxInforms	1.3.6.1.4.1.4874.2.2.22.1.3.1.8	Counter32	read-only	The number of inform messages received by this local server.
C32 juniDhcpLocalServerRxOtherRequests	1.3.6.1.4.1.4874.2.2.22.1.3.1.26	Counter32	read-only	The number of requests for which the request type cannot be determined. For example, a request from an unknown client.
C32 juniDhcpLocalServerRxRebinds	1.3.6.1.4.1.4874.2.2.22.1.3.1.16	Counter32	read-only	The number of rebind messages received by this local server.
C32 juniDhcpLocalServerRxReleases	1.3.6.1.4.1.4874.2.2.22.1.3.1.7	Counter32	read-only	The number of release messages received by this local server.
C32 juniDhcpLocalServerRxRenews	1.3.6.1.4.1.4874.2.2.22.1.3.1.5	Counter32	read-only	The number of renew messages received by this local server.
C32 juniDhcpLocalServerRxUnknownClients	1.3.6.1.4.1.4874.2.2.22.1.3.1.17	Counter32	read-only	The number of non-request messages received by this local server that have no matching entry in the server database.
JUN juniDhcpLocalServerSnmpTrap	1.3.6.1.4.1.4874.2.2.22.1.3.4.3	JuniEnable	read-write	An object that determines whether or not the DHCP Local Server generates SNMP traps when conditions that trigger traps occur.
juniDhcpLocalServerStatistics	1.3.6.1.4.1.4874.2.2.22.1.3.1
C32 juniDhcpLocalServerSubInterfaceBadMessages	1.3.6.1.4.1.4874.2.2.22.1.3.1.30.1.13	Counter32	read-only	The number of bad messages processed by this local server. This object has been deprecated and will return 0.
C32 juniDhcpLocalServerSubInterfaceClientCount	1.3.6.1.4.1.4874.2.2.22.1.3.1.30.1.16	Counter32	read-only	The number of clients active on this subinterface.
C32 juniDhcpLocalServerSubInterfaceDeniedLogins	1.3.6.1.4.1.4874.2.2.22.1.3.1.30.1.17	Counter32	read-only	The number of logins denied on this subinterface since the last allowed login.
C32 juniDhcpLocalServerSubInterfaceDeniedTotal	1.3.6.1.4.1.4874.2.2.22.1.3.1.30.1.18	Counter32	read-only	The total number of logins denied on this subinterface.
juniDhcpLocalServerSubInterfaceEntry	1.3.6.1.4.1.4874.2.2.22.1.3.4.2.1		not-accessible	An entry (conceptual row) representing a subinterface binding for this DHCP Local Server. Rows in this table cannot be created via SNMP. They are created at run time by the Local Server
NUM juniDhcpLocalServerSubInterfaceIndex	1.3.6.1.4.1.4874.2.2.22.1.3.4.2.1.1	InterfaceIndex	not-accessible	The index value of this table entry.
I32 juniDhcpLocalServerSubInterfaceLimit	1.3.6.1.4.1.4874.2.2.22.1.3.4.2.1.3	Integer32	read-only	The number of clients allowed by the local server on this subinterface.
C32 juniDhcpLocalServerSubInterfaceMemUsage	1.3.6.1.4.1.4874.2.2.22.1.3.1.30.1.1	Counter32	read-only	The amount (in bytes) of memory currently allocated to this local server.
STR juniDhcpLocalServerSubInterfaceName	1.3.6.1.4.1.4874.2.2.22.1.3.4.2.1.2	DisplayString	read-only	The string that identifies the subinterface for this entry.
C32 juniDhcpLocalServerSubInterfaceNumBindings	1.3.6.1.4.1.4874.2.2.22.1.3.1.30.1.2	Counter32	read-only	The number of address bindings maintained by this local server.
C32 juniDhcpLocalServerSubInterfacePacketsIn	1.3.6.1.4.1.4874.2.2.22.1.3.1.30.1.14	Counter32	read-only	The number of input packets processed by this local server.
C32 juniDhcpLocalServerSubInterfacePacketsOut	1.3.6.1.4.1.4874.2.2.22.1.3.1.30.1.15	Counter32	read-only	The number of output packets processed by this local server.
C32 juniDhcpLocalServerSubInterfaceRxAccepts	1.3.6.1.4.1.4874.2.2.22.1.3.1.30.1.4	Counter32	read-only	The number of accept messages received by this local server.
C32 juniDhcpLocalServerSubInterfaceRxDeclines	1.3.6.1.4.1.4874.2.2.22.1.3.1.30.1.6	Counter32	read-only	The number of decline messages received by this local server.
C32 juniDhcpLocalServerSubInterfaceRxDiscovers	1.3.6.1.4.1.4874.2.2.22.1.3.1.30.1.3	Counter32	read-only	The number of discover messages received by this local server.
C32 juniDhcpLocalServerSubInterfaceRxInDiscards	1.3.6.1.4.1.4874.2.2.22.1.3.1.30.1.22	Counter32	read-only	The number of packets received on this interface that can not be processed due to system resource issues.
C32 juniDhcpLocalServerSubInterfaceRxInErrors	1.3.6.1.4.1.4874.2.2.22.1.3.1.30.1.21	Counter32	read-only	The number of packets received on this interface that can not be processed due to protocol or configuration errors.
C32 juniDhcpLocalServerSubInterfaceRxInforms	1.3.6.1.4.1.4874.2.2.22.1.3.1.30.1.8	Counter32	read-only	The number of inform messages received by this local server.
C32 juniDhcpLocalServerSubInterfaceRxOtherRequests	1.3.6.1.4.1.4874.2.2.22.1.3.1.30.1.29	Counter32	read-only	The number of requests for which the request type cannot be determined. For example, a request from an unknown client.
C32 juniDhcpLocalServerSubInterfaceRxRebinds	1.3.6.1.4.1.4874.2.2.22.1.3.1.30.1.19	Counter32	read-only	The number of rebind messages received on this interface.
C32 juniDhcpLocalServerSubInterfaceRxReleases	1.3.6.1.4.1.4874.2.2.22.1.3.1.30.1.7	Counter32	read-only	The number of release messages received by this local server.
C32 juniDhcpLocalServerSubInterfaceRxRenews	1.3.6.1.4.1.4874.2.2.22.1.3.1.30.1.5	Counter32	read-only	The number of renew messages received by this local server.
C32 juniDhcpLocalServerSubInterfaceRxUnknownClients	1.3.6.1.4.1.4874.2.2.22.1.3.1.30.1.20	Counter32	read-only	The number of non-request messages received on this interface that have no matching entry in the server database.
juniDhcpLocalServerSubInterfaceStatisticsEntry	1.3.6.1.4.1.4874.2.2.22.1.3.1.30.1		not-accessible	An entry (conceptual row) representing an address binding maintained by this DHCP Local Server.
juniDhcpLocalServerSubInterfaceStatisticsTable	1.3.6.1.4.1.4874.2.2.22.1.3.1.30		not-accessible	A table of subinterface statistics maintained by this DHCP Local Server.
juniDhcpLocalServerSubInterfaceTable	1.3.6.1.4.1.4874.2.2.22.1.3.4.2		not-accessible	A table of subinterface configuration maintained by this DHCP Local Server.
C32 juniDhcpLocalServerSubInterfaceTxAcks	1.3.6.1.4.1.4874.2.2.22.1.3.1.30.1.10	Counter32	read-only	The number of ack messages sent by this local server.
C32 juniDhcpLocalServerSubInterfaceTxNaks	1.3.6.1.4.1.4874.2.2.22.1.3.1.30.1.11	Counter32	read-only	The number of nak messages sent by this local server.
C32 juniDhcpLocalServerSubInterfaceTxOffers	1.3.6.1.4.1.4874.2.2.22.1.3.1.30.1.9	Counter32	read-only	The number of offer messages sent by this local server.
C32 juniDhcpLocalServerSubInterfaceTxOutDiscards	1.3.6.1.4.1.4874.2.2.22.1.3.1.30.1.28	Counter32	read-only	The number of packets that could not be transmitted on this interface due to system resource issues.
C32 juniDhcpLocalServerSubInterfaceTxOutErrors	1.3.6.1.4.1.4874.2.2.22.1.3.1.30.1.27	Counter32	read-only	The number of packets that could not be transmitted on this interface due to protocol or configuration errors.
C32 juniDhcpLocalServerSubInterfaceTxRebindAcks	1.3.6.1.4.1.4874.2.2.22.1.3.1.30.1.24	Counter32	read-only	The number of rebind ack messages sent on this interface.
C32 juniDhcpLocalServerSubInterfaceTxRebindNaks	1.3.6.1.4.1.4874.2.2.22.1.3.1.30.1.26	Counter32	read-only	The number of rebind nak messages sent on this interface.
C32 juniDhcpLocalServerSubInterfaceTxRenewAcks	1.3.6.1.4.1.4874.2.2.22.1.3.1.30.1.23	Counter32	read-only	The number of renew ack messages sent on this interface.
C32 juniDhcpLocalServerSubInterfaceTxRenewNaks	1.3.6.1.4.1.4874.2.2.22.1.3.1.30.1.25	Counter32	read-only	The number of renew nak messages sent on this interface.
C32 juniDhcpLocalServerSubInterfaceUnknownMessages	1.3.6.1.4.1.4874.2.2.22.1.3.1.30.1.12	Counter32	read-only	The number of unknown messages processed by this local server. This object has been deprecated and will return 0.
juniDhcpLocalServerTrapGroup	1.3.6.1.4.1.4874.2.2.22.4.2.16			The notifications providing alarms for high pool utilization and pool exhaustion of DHCP local address pools and interface limit events and duplicate (roaming) clients.
juniDhcpLocalServerTraps	1.3.6.1.4.1.4874.2.2.22.1.3.0
C32 juniDhcpLocalServerTxAcks	1.3.6.1.4.1.4874.2.2.22.1.3.1.10	Counter32	read-only	The number of accept ack messages sent by this local server.
C32 juniDhcpLocalServerTxNaks	1.3.6.1.4.1.4874.2.2.22.1.3.1.11	Counter32	read-only	The number of nak messages sent by this local server.
C32 juniDhcpLocalServerTxOffers	1.3.6.1.4.1.4874.2.2.22.1.3.1.9	Counter32	read-only	The number of offer messages sent by this local server.
C32 juniDhcpLocalServerTxOutDiscards	1.3.6.1.4.1.4874.2.2.22.1.3.1.25	Counter32	read-only	The number of packets that could not be transmitted by this local server due to system resource issues.
C32 juniDhcpLocalServerTxOutErrors	1.3.6.1.4.1.4874.2.2.22.1.3.1.24	Counter32	read-only	The number of packets that could not be transmitted by this local server due to protocol or configuration errors.
C32 juniDhcpLocalServerTxRebindAcks	1.3.6.1.4.1.4874.2.2.22.1.3.1.21	Counter32	read-only	The number of rebind ack messages sent by this local server.
C32 juniDhcpLocalServerTxRebindNaks	1.3.6.1.4.1.4874.2.2.22.1.3.1.23	Counter32	read-only	The number of rebind nak messages sent by this local server.
C32 juniDhcpLocalServerTxRenewAcks	1.3.6.1.4.1.4874.2.2.22.1.3.1.20	Counter32	read-only	The number of renew ack messages sent by this local server.
C32 juniDhcpLocalServerTxRenewNaks	1.3.6.1.4.1.4874.2.2.22.1.3.1.22	Counter32	read-only	The number of renew nak messages sent by this local server.
JUN juniDhcpLocalServerUniqueClientIds	1.3.6.1.4.1.4874.2.2.22.1.3.4.5	JuniEnable	read-write	An object representing the mode in which the DHCP Local Server is operating as it pertains to allowing multiple clients having identical client IDs or hardware addresses.
C32 juniDhcpLocalServerUnknownMessages	1.3.6.1.4.1.4874.2.2.22.1.3.1.12	Counter32	read-only	The number of unknown messages processed by this local server. This object is deprecated and will return 0.
juniDhcpMIB	1.3.6.1.4.1.4874.2.2.22			The DHCP MIB for the Juniper Networks enterprise.
juniDhcpMIBCompliances	1.3.6.1.4.1.4874.2.2.22.4.1
juniDhcpMIBConformance	1.3.6.1.4.1.4874.2.2.22.4
juniDhcpMIBGroups	1.3.6.1.4.1.4874.2.2.22.4.2
juniDhcpObjects	1.3.6.1.4.1.4874.2.2.22.1
juniDhcpProxy	1.3.6.1.4.1.4874.2.2.22.1.2
juniDhcpProxyClient	1.3.6.1.4.1.4874.2.2.22.1.2.1
juniDhcpProxyClientScalars	1.3.6.1.4.1.4874.2.2.22.1.2.1.1
C32 juniDhcpProxyClientServerAcks	1.3.6.1.4.1.4874.2.2.22.1.2.1.2.1.9	Counter32	read-only	Number of DHCP ACKS received by the client from this server.
IP juniDhcpProxyClientServerAddress	1.3.6.1.4.1.4874.2.2.22.1.2.1.2.1.1	IpAddress	not-accessible	The IP address of a DHCP server with which DHCP transactions are conducted by this client.
INT juniDhcpProxyClientServerAdminStatus	1.3.6.1.4.1.4874.2.2.22.1.2.1.2.1.3	INTEGER	read-create	Permits configuration of the client's operation status with respect to this server: disable Bar the client from using this server to obtain new address leases; and cause any leases from that server, that are currently in use by the client, to be released. drain Bar the client from using this server to obtain new address leases; but permit any leases from that server, that are currently in use by the client, to remain in use until they expire naturally. enabled Allow the client to use the server to obtain new address leases. Implementations that don't support administrative control of the server always report the value of enable(2), and disallow setting this object to any other value.
C32 juniDhcpProxyClientServerBadMessages	1.3.6.1.4.1.4874.2.2.22.1.2.1.2.1.14	Counter32	read-only	Number of DHCP Proxy messages received by the client from this server, that were discarded because of apparent corruption.
C32 juniDhcpProxyClientServerDeclines	1.3.6.1.4.1.4874.2.2.22.1.2.1.2.1.11	Counter32	read-only	Number of DHCP Declines sent by the client to this server.
C32 juniDhcpProxyClientServerDiscovers	1.3.6.1.4.1.4874.2.2.22.1.2.1.2.1.6	Counter32	read-only	Number of DHCP Discovers directed (i.e. nonbroadcast) by the client to this server.
juniDhcpProxyClientServerEntry	1.3.6.1.4.1.4874.2.2.22.1.2.1.2.1		not-accessible	An entry (conceptual row) representing a DHCP Proxy server known to the client.
C32 juniDhcpProxyClientServerInforms	1.3.6.1.4.1.4874.2.2.22.1.2.1.2.1.13	Counter32	read-only	Number of DHCP Informs sent by the client to this server.
C32 juniDhcpProxyClientServerLeases	1.3.6.1.4.1.4874.2.2.22.1.2.1.2.1.5	Counter32	read-only	Total number of address leases granted to the client by this server (including those that have expired). The number of active leases from this server is determined by subtracting the value of juniDhcpProxyClientServerReleases from the value of this object.
C32 juniDhcpProxyClientServerNaks	1.3.6.1.4.1.4874.2.2.22.1.2.1.2.1.10	Counter32	read-only	Number of DHCP NAKS received by the client from this server.
C32 juniDhcpProxyClientServerOffers	1.3.6.1.4.1.4874.2.2.22.1.2.1.2.1.7	Counter32	read-only	Number of DHCP Offers received by the client from this server.
INT juniDhcpProxyClientServerOperStatus	1.3.6.1.4.1.4874.2.2.22.1.2.1.2.1.4	INTEGER	read-only	Reports the client's current operation status with respect to this server: disabled The client is barred from using this server to obtain new address leases; and any leases from that server, that were in use by the client, have been released. draining The client is barred from using this server to obtain new address leases, but one or more leases from that server, that are in use by the client, will remain in use until they expire naturally. enabled The client may use the server to obtain new address leases, and may have one or more leases currently in use. Implementations that don't support administrative control of the server always report the value enabled(2).
C32 juniDhcpProxyClientServerReleases	1.3.6.1.4.1.4874.2.2.22.1.2.1.2.1.12	Counter32	read-only	Number of DHCP Releases sent by the client to this server.
C32 juniDhcpProxyClientServerRequests	1.3.6.1.4.1.4874.2.2.22.1.2.1.2.1.8	Counter32	read-only	Number of DHCP Requests sent by the client to this server.
ROW juniDhcpProxyClientServerRowStatus	1.3.6.1.4.1.4874.2.2.22.1.2.1.2.1.2	RowStatus	read-create	Supports 'createAndGo' and 'destroy' only.
juniDhcpProxyClientServerTable	1.3.6.1.4.1.4874.2.2.22.1.2.1.2		not-accessible	The (conceptual) table listing the DHCP Proxy servers known to the client.
C32 juniDhcpProxyClientServerUnknownMessages	1.3.6.1.4.1.4874.2.2.22.1.2.1.2.1.15	Counter32	read-only	Number of DHCP Proxy messages received by the client from this server, that were discarded because they contained information or options not recognized by the client.
C32 juniDhcpProxyClientUnknownServers	1.3.6.1.4.1.4874.2.2.22.1.2.1.1.1	Counter32	read-only	Total number of DHCP Proxy messages received from servers not listed in the juniDhcpProxyClientServerTable.
juniDhcpProxyCompliance	1.3.6.1.4.1.4874.2.2.22.4.1.2			Obsolete compliance statement for systems supporting DHCP Proxy. This statement became obsolete when Local Server support objects were added.
juniDhcpProxyGroup	1.3.6.1.4.1.4874.2.2.22.4.2.2			The basic collection of objects providing management of DHCP Proxy functionality.
juniDhcpProxyServer	1.3.6.1.4.1.4874.2.2.22.1.2.2
juniDhcpRelay	1.3.6.1.4.1.4874.2.2.22.1.1
JUN juniDhcpRelayAgentCircuitIdEnable	1.3.6.1.4.1.4874.2.2.22.1.1.1.6	JuniEnable	read-write	Enable/disable use of the DHCP Relay Agent Info option Circuit Id suboption.
JUN juniDhcpRelayAgentExcludeSubIdEnable	1.3.6.1.4.1.4874.2.2.22.1.1.1.10	JuniEnable	read-write	Enable/disable excluding of the subinterface identifier in the DHCP Relay Agent Info option Circuit Id suboption.
C32 juniDhcpRelayAgentGiaddrOverrides	1.3.6.1.4.1.4874.2.2.22.1.1.1.13	Counter32	read-only	Number of received DHCP relay requests whose giaddr field was overridden with IP address 0.0.0.0.
JUN juniDhcpRelayAgentHostnameEnable	1.3.6.1.4.1.4874.2.2.22.1.1.1.8	JuniEnable	read-write	Enable/disable addition of Host Name to the DHCP Relay Agent Info option Circuit Id suboption.
C32 juniDhcpRelayAgentInfoAlreadyPresentForwards	1.3.6.1.4.1.4874.2.2.22.1.1.1.12	Counter32	read-only	Number of received DHCP relay requests forwarded to DHCP server(s) that already contain the Relay Agent Info option.
C32 juniDhcpRelayAgentInfoAlreadyPresents	1.3.6.1.4.1.4874.2.2.22.1.1.1.4	Counter32	read-only	Number of received DHCP relay requests that were discarded because they already contained the Relay Agent Info option when this agent was configured to insert it.
JUN juniDhcpRelayAgentInfoEnable	1.3.6.1.4.1.4874.2.2.22.1.1.1.1	JuniEnable	read-write	Enable/disable use of the DHCP relay agent information option.
C32 juniDhcpRelayAgentOptionOverrides	1.3.6.1.4.1.4874.2.2.22.1.1.1.14	Counter32	read-only	Number of received DHCP relay requests whose Relay Agent Info option was overridden with one created by this agent.
JUN juniDhcpRelayAgentRemoteIdEnable	1.3.6.1.4.1.4874.2.2.22.1.1.1.7	JuniEnable	read-write	Enable/disable use of the DHCP Relay Agent Info option Remote Id suboption.
JUN juniDhcpRelayAgentTrustAllEnable	1.3.6.1.4.1.4874.2.2.22.1.1.1.11	JuniEnable	read-write	Enable/disable Trust-all processing of the DHCP Relay Agent Info option.
BIT juniDhcpRelayAgentVendorSpecificSuboption	1.3.6.1.4.1.4874.2.2.22.1.1.1.26	Bits	read-write	Enable/disable addition of the Layer 2 Circuit ID and/or User Packet Class to the Vendor-Specific sub-option of the DHCP Relay Agent Info option.
JUN juniDhcpRelayAgentVrnameEnable	1.3.6.1.4.1.4874.2.2.22.1.1.1.9	JuniEnable	read-write	Enable/disable addition of Virtual Router Name to the DHCP Relay Agent Info option Circuit Id suboption.
C32 juniDhcpRelayBadMessagesEx	1.3.6.1.4.1.4874.2.2.22.1.1.1.2	Counter32	read-only	Number of received DHCP relay messages that were discarded because their message operation (e.g. BOOTREQUEST, BOOTREPLY) was unknown, possibly due to corruption.
JUN juniDhcpRelayBroadcastFlagReplies	1.3.6.1.4.1.4874.2.2.22.1.1.1.27	JuniEnable	read-write	Enable/disable using broadcast flag from the packet when sending DHCP reply packets to DHCP clients. Mutually exclusive with layer2 unicast replies setting.
juniDhcpRelayCompliance	1.3.6.1.4.1.4874.2.2.22.4.1.1			Obsolete compliance statement for systems supporting DHCP Relay. This statement became obsolete when Local Server support objects were added.
juniDhcpRelayDeprecatedGroup	1.3.6.1.4.1.4874.2.2.22.4.2.8			Deprecated object providing management of DHCP Relay functionality. This group became deprecated when the agent info enable was divided into agent circuit ID enable and agent remote ID enable.
C32 juniDhcpRelayDiscoverDiscards	1.3.6.1.4.1.4874.2.2.22.1.1.1.15	Counter32	read-only	Number of received DHCP relay Discover messages that were discarded because of lack of resources in this agent.
C32 juniDhcpRelayDroppedStaleRequestDiscards	1.3.6.1.4.1.4874.2.2.22.1.1.1.23	Counter32	read-only	Number of DHCP relay requests sent to DHCP server that were discarded because their replies timed out.
C32 juniDhcpRelayDuplicateRequestDiscards	1.3.6.1.4.1.4874.2.2.22.1.1.1.19	Counter32	read-only	Number of received DHCP relay requests that were discarded because they had a matching server address and XID of an outstanding DHCP server request.
C32 juniDhcpRelayGatewayAddrSpoofs	1.3.6.1.4.1.4874.2.2.22.1.1.1.5	Counter32	read-only	Number of received DHCP relay requests that were discarded because the gateway IP address field already contained this agent's IP address.
JUN juniDhcpRelayGiaddrSelectsInterface	1.3.6.1.4.1.4874.2.2.22.1.1.1.25	JuniEnable	read-write	Enable/disable the determination of the client interface by the giaddr in the ACK message.
juniDhcpRelayGroup	1.3.6.1.4.1.4874.2.2.22.4.2.1			Obsolete collection of basic objects providing management of DHCP Relay functionality. This group became obsolete when the agent info enable was divided into agent circuit ID enable and agent remote ID enable.
juniDhcpRelayGroup10	1.3.6.1.4.1.4874.2.2.22.4.2.22			The basic collection of objects providing management of DHCP Relay functionality.
juniDhcpRelayGroup2	1.3.6.1.4.1.4874.2.2.22.4.2.5			Obsolete basic collection of objects providing management of DHCP Relay functionality. This group became obsolete when support was added for adding host name or virtual router name to Option 82 circuit ID field.
juniDhcpRelayGroup3	1.3.6.1.4.1.4874.2.2.22.4.2.6			Obsolete collection of objects providing management of DHCP Relay functionality. This group became obsolete when support was added for excluding the subinterface ID in the Option 82 circuit ID field.
juniDhcpRelayGroup4	1.3.6.1.4.1.4874.2.2.22.4.2.7			Obsolete collection of objects providing management of DHCP Relay functionality. This group became obsolete when support was added for the Trust-all mode.
juniDhcpRelayGroup5	1.3.6.1.4.1.4874.2.2.22.4.2.12			Obsolete basic collection of objects providing management of DHCP Relay functionality.
juniDhcpRelayGroup6	1.3.6.1.4.1.4874.2.2.22.4.2.17			Obsolete basic collection of objects providing management of DHCP Relay functionality.
juniDhcpRelayGroup7	1.3.6.1.4.1.4874.2.2.22.4.2.18			Obsolete basic collection of objects providing management of DHCP Relay functionality.
juniDhcpRelayGroup8	1.3.6.1.4.1.4874.2.2.22.4.2.19			Obsolete basic collection of objects providing management of DHCP Relay functionality.
juniDhcpRelayGroup9	1.3.6.1.4.1.4874.2.2.22.4.2.20			Obsolete basic collection of objects providing management of DHCP Relay functionality.
JUN juniDhcpRelayLayer2UnicastReplies	1.3.6.1.4.1.4874.2.2.22.1.1.1.24	JuniEnable	read-write	Enable/disable the layer 2 unicast / layer 3 broadcast of DHCP reply packets to DHCP clients. Mutually exclusive with broadcast flag replies setting.
C32 juniDhcpRelayPacketDiscards	1.3.6.1.4.1.4874.2.2.22.1.1.1.16	Counter32	read-only	Number of received DHCP relay messages, other than Discover messages, that were discarded because of lack of resource in this agent.
C32 juniDhcpRelayPacketsReceived	1.3.6.1.4.1.4874.2.2.22.1.1.1.21	Counter32	read-only	Number of DHCP relay replies successfully received from DHCP servers.
C32 juniDhcpRelayPacketsTransmitted	1.3.6.1.4.1.4874.2.2.22.1.1.1.20	Counter32	read-only	Number of DHCP relay requests successfully transmitted to DHCP servers.
juniDhcpRelayScalars	1.3.6.1.4.1.4874.2.2.22.1.1.1
IP juniDhcpRelayServerAddress	1.3.6.1.4.1.4874.2.2.22.1.1.2.1.1	IpAddress	not-accessible	The IP address of the DHCP server to which DHCP requests received from attached DHCP clients are forwarded.
juniDhcpRelayServerEntry	1.3.6.1.4.1.4874.2.2.22.1.1.2.1		not-accessible	An entry (conceptual row) representing a DHCP Relay server.
ROW juniDhcpRelayServerRowStatus	1.3.6.1.4.1.4874.2.2.22.1.1.2.1.2	RowStatus	read-create	Supports 'createAndGo' and 'destroy' only.
juniDhcpRelayServerTable	1.3.6.1.4.1.4874.2.2.22.1.1.2		not-accessible	The (conceptual) table listing the DHCP Relay servers.
C32 juniDhcpRelayUnknownMessages	1.3.6.1.4.1.4874.2.2.22.1.1.1.3	Counter32	read-only	Number of received DHCP relay messages that were discarded because their message type (e.g. Discover, Offer, Ack) was unknown, possibly due to corruption. This value is the sum of received request and reply messages with this error.
C32 juniDhcpRelayUnknownReplyMessages	1.3.6.1.4.1.4874.2.2.22.1.1.1.18	Counter32	read-only	Number of received DHCP relay reply messages that were discarded because their message type (e.g. Discover, Offer, Ack) was unknown, possibly due to corruption.
C32 juniDhcpRelayUnknownRequestMessages	1.3.6.1.4.1.4874.2.2.22.1.1.1.17	Counter32	read-only	Number of received DHCP relay request messages that were discarded because their message type (e.g. Discover, Offer, Ack) was unknown, possibly due to corruption.
C32 juniDhcpRelayUnknownXidDiscards	1.3.6.1.4.1.4874.2.2.22.1.1.1.22	Counter32	read-only	Number of DHCP relay replies received from DHCP servers that were discarded because their server address and XID did not match an outstanding DHCP server request.
juniDhcpTrapControl	1.3.6.1.4.1.4874.2.2.22.2

RFC description

Manages DHCP server and relay functions including bindings, pools, and lease intervals on Juniper platforms.

Start monitoring Juniper Networks E-series (ERX) broadband router (DHCP relay/proxy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Juniper-DHCP-MIB