JUNIPER-OTN-MIB

All MIBs › JUNIPER-OTN-MIB

Organization: Juniper Networks, Inc.

Last Updated: 2015-06-17

Category: Technology: Optical Transport, Vendor: Juniper

Description: Juniper Networks MIB for monitoring Optical Transport Network (OTN) interface performance and alarm status on Juniper platforms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is JUNIPER-OTN-MIB?

JUNIPER-OTN-MIB is Juniper's MIB for monitoring Optical Transport Network (OTN) interface performance and alarms on Juniper platforms equipped with OTN-capable line cards. It exposes alarm/fault status (current and historical alarm events with IDs and timestamps) and performance-monitoring counters at 15-minute intervals for the ODU/OTU optical layers (bit errors, background block errors, errored seconds). This is fundamentally a hardware/optical-transport health and performance monitoring MIB—current alarm objects track active fault conditions on optical interfaces, while the 15-minute interval BIP/BBE/ES counters reveal degrading signal quality, making it central to detecting failing optics or fiber issues. It builds on general OTN/ITU-T G.709 concepts and likely complements standard interface MIBs (IF-MIB) for the underlying physical interface. It is typically deployed in service-provider and enterprise backbone networks using Juniper routers/switches with OTN line cards for long-haul optical transport. Network engineers evaluating or troubleshooting this functionality can download the JUNIPER-OTN-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in JUNIPER-OTN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Juniper Networks routers/switches with OTN-capable optical interfaces

Monitoring Examples

An admin would poll jnxOtnCurrentAlarms and jnxOtnAlarmTable/jnxOtnAlarmEntry (with jnxOtnLastAlarmId, jnxOtnLastAlarmTime, jnxOtnLastAlarmEvent) to see the most recent optical alarm raised on an OTN interface. The jnxOtnCurrentOdu15minTable (jnxOtnCurrentOdu15minBIP, jnxOtnCurrentOdu15minBBE, jnxOtnCurrentOdu15minES) would be polled each interval to track bit-interleaved-parity errors and errored seconds, where a rising BBE/ES count over successive 15-minute windows would indicate a degrading optical signal or a fiber/connector problem before it causes a full outage.

What Can Be Monitored

current OTN alarm status
alarm history (ID, time, event)
ODU/OTU bit error counts
background block errors
errored seconds

Imported Objects

From IF-MIB

ifDescr	OBJECT-TYPE
ifIndex	OBJECT-TYPE

From JUNIPER-SMI

jnxOtnMibRoot	OBJECT-IDENTITY
jnxOtnNotifications	OBJECT-IDENTITY

From SNMPv2-SMI

Counter32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DateAndTime
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
NTF jnxOtnAlarmCleared	1.3.6.1.4.1.2636.4.15.0.2			Notification of a recently cleared Otn alarm.
jnxOtnAlarmEntry	1.3.6.1.4.1.2636.3.56.1.1.1.1		not-accessible	Information about alarms on a sonet/sdh physical interface on this router.
jnxOtnAlarms	1.3.6.1.4.1.2636.3.56.1.1
NTF jnxOtnAlarmSet	1.3.6.1.4.1.2636.4.15.0.1			Notification of a recently set Otn alarm.
jnxOtnAlarmTable	1.3.6.1.4.1.2636.3.56.1.1.1		not-accessible	Information about alarms on all the sonet/sdh physical interfaces on this router.
JNX jnxOtnCurrentAlarms	1.3.6.1.4.1.2636.3.56.1.1.1.1.1	JnxOtnAlarmId	read-only	This object identifies all the active OTN alarms on this interface.
U32 jnxOtnCurrentOdu15minBBE	1.3.6.1.4.1.2636.3.56.1.2.1.1.2	Unsigned32	read-only	Current 15 minute BBE counter
U32 jnxOtnCurrentOdu15minBIP	1.3.6.1.4.1.2636.3.56.1.2.1.1.1	Unsigned32	read-only	Current 15 minute BIP counter
U32 jnxOtnCurrentOdu15minElapsedTime	1.3.6.1.4.1.2636.3.56.1.2.1.1.6	Unsigned32	read-only	Time elapsed for this 15 minute interval
jnxOtnCurrentOdu15minEntry	1.3.6.1.4.1.2636.3.56.1.2.1.1		not-accessible	Performance data about ia 15 minute interface on this router
U32 jnxOtnCurrentOdu15minES	1.3.6.1.4.1.2636.3.56.1.2.1.1.3	Unsigned32	read-only	Current 15 minute ES counter
U32 jnxOtnCurrentOdu15minSES	1.3.6.1.4.1.2636.3.56.1.2.1.1.4	Unsigned32	read-only	Current 15 minute SES counter
jnxOtnCurrentOdu15minTable	1.3.6.1.4.1.2636.3.56.1.2.1		not-accessible	Information about ODU Performance monitoring for this interfaces on this router.
U32 jnxOtnCurrentOdu15minUAS	1.3.6.1.4.1.2636.3.56.1.2.1.1.5	Unsigned32	read-only	Current 15 minute UAS counter
U32 jnxOtnCurrentOtu15minBBE	1.3.6.1.4.1.2636.3.56.1.2.4.1.2	Unsigned32	read-only	Current 15 minute BBE counter
U32 jnxOtnCurrentOtu15minBIP	1.3.6.1.4.1.2636.3.56.1.2.4.1.1	Unsigned32	read-only	Current 15 minute BIP counter
U32 jnxOtnCurrentOtu15minElapsedTime	1.3.6.1.4.1.2636.3.56.1.2.4.1.6	Unsigned32	read-only	Time elapsed for this 15 minute interval
jnxOtnCurrentOtu15minEntry	1.3.6.1.4.1.2636.3.56.1.2.4.1		not-accessible	Performance data about ia 15 minute interface on this router
U32 jnxOtnCurrentOtu15minES	1.3.6.1.4.1.2636.3.56.1.2.4.1.3	Unsigned32	read-only	Current 15 minute ES counter
U32 jnxOtnCurrentOtu15minSES	1.3.6.1.4.1.2636.3.56.1.2.4.1.4	Unsigned32	read-only	Current 15 minute SES counter
jnxOtnCurrentOtu15minTable	1.3.6.1.4.1.2636.3.56.1.2.4		not-accessible	Information about ODU Performance monitoring for this interfaces on this router.
U32 jnxOtnCurrentOtu15minUAS	1.3.6.1.4.1.2636.3.56.1.2.4.1.5	Unsigned32	read-only	Current 15 minute UAS counter
U32 jnxOtnCurrentOtuFec15minCorrectedErrorRatioX	1.3.6.1.4.1.2636.3.56.1.2.7.1.2	Unsigned32	read-only	Current 15 minute CorrectedErrorRatioX counter
U32 jnxOtnCurrentOtuFec15minCorrectedErrorRatioY	1.3.6.1.4.1.2636.3.56.1.2.7.1.3	Unsigned32	read-only	Current 15 minute CorrectedErrorRatioY exponent
U32 jnxOtnCurrentOtuFec15minCorrectedErrors	1.3.6.1.4.1.2636.3.56.1.2.7.1.1	Unsigned32	read-only	Current 15 minute FEC Corrected Errors counter
U32 jnxOtnCurrentOtuFec15minElapsedTime	1.3.6.1.4.1.2636.3.56.1.2.7.1.5	Unsigned32	read-only	Time elapsed for this 15 minute interval
jnxOtnCurrentOtuFec15minEntry	1.3.6.1.4.1.2636.3.56.1.2.7.1		not-accessible	Performance data about ia 15 minute interface on this router
jnxOtnCurrentOtuFec15minTable	1.3.6.1.4.1.2636.3.56.1.2.7		not-accessible	Information about ODU Performance monitoring for this interfaces on this router.
U32 jnxOtnCurrentOtuFec15minUncorrectedWords	1.3.6.1.4.1.2636.3.56.1.2.7.1.4	Unsigned32	read-only	Current 15 minute FEC UnCorrected Words counter
DAT jnxOtnIntervalODdu15minTimeStamp	1.3.6.1.4.1.2636.3.56.1.2.2.1.8	DateAndTime	read-only	Time elapsed for this 15 minute interval
U32 jnxOtnIntervalOdu15minBBE	1.3.6.1.4.1.2636.3.56.1.2.2.1.3	Unsigned32	read-only	Interval 'n' 15 minute BBE counter
U32 jnxOtnIntervalOdu15minBIP	1.3.6.1.4.1.2636.3.56.1.2.2.1.2	Unsigned32	read-only	Interval 'n' 15 minute BIP counter
jnxOtnIntervalOdu15minEntry	1.3.6.1.4.1.2636.3.56.1.2.2.1		not-accessible	Performance data in a 15 minute interface on this router.
U32 jnxOtnIntervalOdu15minES	1.3.6.1.4.1.2636.3.56.1.2.2.1.4	Unsigned32	read-only	Interval 'n' 15 minute ES counter
INT jnxOtnIntervalOdu15minIntervalNumber	1.3.6.1.4.1.2636.3.56.1.2.2.1.1	INTEGER	not-accessible	A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 1.
U32 jnxOtnIntervalOdu15minInvalidData	1.3.6.1.4.1.2636.3.56.1.2.2.1.7	Unsigned32	read-only	Time elapsed for this 15 minute interval
U32 jnxOtnIntervalOdu15minSES	1.3.6.1.4.1.2636.3.56.1.2.2.1.5	Unsigned32	read-only	Interval 'n' 15 minute SES counter
jnxOtnIntervalOdu15minTable	1.3.6.1.4.1.2636.3.56.1.2.2		not-accessible	Information about ODU Performance monitoring for this interfaces on this router.
U32 jnxOtnIntervalOdu15minUAS	1.3.6.1.4.1.2636.3.56.1.2.2.1.6	Unsigned32	read-only	Interval 15 minute UAS counter
U32 jnxOtnIntervalOtu15minBBE	1.3.6.1.4.1.2636.3.56.1.2.5.1.3	Unsigned32	read-only	Interval 'n' 15 minute BBE counter
U32 jnxOtnIntervalOtu15minBIP	1.3.6.1.4.1.2636.3.56.1.2.5.1.2	Unsigned32	read-only	Interval 'n' 15 minute BIP counter
jnxOtnIntervalOtu15minEntry	1.3.6.1.4.1.2636.3.56.1.2.5.1		not-accessible	Performance data about ia 15 minute interface on this router.
U32 jnxOtnIntervalOtu15minES	1.3.6.1.4.1.2636.3.56.1.2.5.1.4	Unsigned32	read-only	Interval 'n' 15 minute ES counter
INT jnxOtnIntervalOtu15minIntervalNumber	1.3.6.1.4.1.2636.3.56.1.2.5.1.1	INTEGER	not-accessible	A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 1.
U32 jnxOtnIntervalOtu15minInvalidData	1.3.6.1.4.1.2636.3.56.1.2.5.1.7	Unsigned32	read-only	Time elapsed for this 15 minute interval
U32 jnxOtnIntervalOtu15minSES	1.3.6.1.4.1.2636.3.56.1.2.5.1.5	Unsigned32	read-only	Interval 'n' 15 minute SES counter
jnxOtnIntervalOtu15minTable	1.3.6.1.4.1.2636.3.56.1.2.5		not-accessible	Information about ODU Performance monitoring for this interfaces on this router.
DAT jnxOtnIntervalOtu15minTimeStamp	1.3.6.1.4.1.2636.3.56.1.2.5.1.8	DateAndTime	read-only	Time elapsed for this 15 minute interval
U32 jnxOtnIntervalOtu15minUAS	1.3.6.1.4.1.2636.3.56.1.2.5.1.6	Unsigned32	read-only	Interval 15 minute UAS counter
U32 jnxOtnIntervalOtuFec15minCorrectedErrorRatioX	1.3.6.1.4.1.2636.3.56.1.2.8.1.3	Unsigned32	read-only	Interval 15 minute CorrectedErrorRatioX counter
U32 jnxOtnIntervalOtuFec15minCorrectedErrorRatioY	1.3.6.1.4.1.2636.3.56.1.2.8.1.4	Unsigned32	read-only	Interval 15 minute CorrectedErrorRatioY exponent
U32 jnxOtnIntervalOtuFec15minCorrectedErrors	1.3.6.1.4.1.2636.3.56.1.2.8.1.2	Unsigned32	read-only	Interval 15 minute FEC Corrected Errors counter
jnxOtnIntervalOtuFec15minEntry	1.3.6.1.4.1.2636.3.56.1.2.8.1		not-accessible	Performance data about ia 15 minute interface on this router
INT jnxOtnIntervalOtuFec15minIntervalNumber	1.3.6.1.4.1.2636.3.56.1.2.8.1.1	INTEGER	not-accessible	A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 1.
jnxOtnIntervalOtuFec15minTable	1.3.6.1.4.1.2636.3.56.1.2.8		not-accessible	Information about ODU Performance monitoring for this interfaces on this router.
DAT jnxOtnIntervalOtuFec15minTimeStamp	1.3.6.1.4.1.2636.3.56.1.2.8.1.6	DateAndTime	read-only	Time elapsed for this 15 minute interval
U32 jnxOtnIntervalOtuFec15minUncorrectedWords	1.3.6.1.4.1.2636.3.56.1.2.8.1.5	Unsigned32	read-only	Interval 15 minute FEC UnCorrected Words counter
DAT jnxOtnLastAlarmDate	1.3.6.1.4.1.2636.3.56.1.1.1.1.4	DateAndTime	read-only	The system date and time when the management subsystem learned of the last alarm event.
INT jnxOtnLastAlarmEvent	1.3.6.1.4.1.2636.3.56.1.1.1.1.5	INTEGER	read-only	This indicates whether the last alarm event set a new alarm or cleared an existing alarm.
JNX jnxOtnLastAlarmId	1.3.6.1.4.1.2636.3.56.1.1.1.1.2	JnxOtnAlarmId	read-only	The object identifies the OTN alarm that most recently was set or cleared.
TIK jnxOtnLastAlarmTime	1.3.6.1.4.1.2636.3.56.1.1.1.1.3	TimeTicks	read-only	The value of sysUpTime when the management subsystem learned of the last alarm event.
jnxOtnMib	1.3.6.1.4.1.2636.3.56.1			Changed jnxOtnIntervalOdu15minIntervalNumber, jnxOtnIntervalOtu15minIntervalNumber, jnxOtnIntervalOtuFec15minIntervalNumber from read-only to not-accessible
jnxOtnNotificationPrefix	1.3.6.1.4.1.2636.4.15.0
jnxOtnPerformanceMonitoring	1.3.6.1.4.1.2636.3.56.1.2
U32 jnxOtnTotalOduBBE	1.3.6.1.4.1.2636.3.56.1.2.3.1.3	Unsigned32	read-only	Total (1 day) BBE counter in an OTN ODU frame in the in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
U32 jnxOtnTotalOduBIP	1.3.6.1.4.1.2636.3.56.1.2.3.1.2	Unsigned32	read-only	Total (1 day) BIP counter
INT jnxOtnTotalOduDayNumber	1.3.6.1.4.1.2636.3.56.1.2.3.1.1	INTEGER	read-only	Day 'n'number -- currently only one day is supported
jnxOtnTotalOduEntry	1.3.6.1.4.1.2636.3.56.1.2.3.1		not-accessible	Performance data about ia 15 minute interface on this router.
U32 jnxOtnTotalOduES	1.3.6.1.4.1.2636.3.56.1.2.3.1.4	Unsigned32	read-only	Total (1 day) ES counter in an OTN ODU frame in the in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
U32 jnxOtnTotalOduSES	1.3.6.1.4.1.2636.3.56.1.2.3.1.5	Unsigned32	read-only	Total (1 day) SES counter in an OTN ODU frame in the in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
jnxOtnTotalOduTable	1.3.6.1.4.1.2636.3.56.1.2.3		not-accessible	Information about ODU Performance monitoring for this interfaces on this router.
U32 jnxOtnTotalOduUAS	1.3.6.1.4.1.2636.3.56.1.2.3.1.6	Unsigned32	read-only	Total (1 day) UAS counter in an OTN ODU frame in the in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
U32 jnxOtnTotalOtuBBE	1.3.6.1.4.1.2636.3.56.1.2.6.1.3	Unsigned32	read-only	Total (1 day) BBE counter in an OTN OTU frame in the in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
U32 jnxOtnTotalOtuBIP	1.3.6.1.4.1.2636.3.56.1.2.6.1.2	Unsigned32	read-only	Total (1 day) BIP counter in an OTN OTU frame in the in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
INT jnxOtnTotalOtuDayNumber	1.3.6.1.4.1.2636.3.56.1.2.6.1.1	INTEGER	read-only	Day 'n'number -- currently only one day is supported
jnxOtnTotalOtuEntry	1.3.6.1.4.1.2636.3.56.1.2.6.1		not-accessible	Performance data about ia 15 minute interface on this router.
U32 jnxOtnTotalOtuES	1.3.6.1.4.1.2636.3.56.1.2.6.1.4	Unsigned32	read-only	Total (1 day) ES counter in an OTN OTU frame in the in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
U32 jnxOtnTotalOtuFecCorrectedErrors	1.3.6.1.4.1.2636.3.56.1.2.9.1.2	Unsigned32	read-only	Interval 15 minute FEC Corrected Errors counter in an OTN frame in the in the previous 24 hour interval. Invalid 15 minute intervals count as 0
INT jnxOtnTotalOtuFecDayNumber	1.3.6.1.4.1.2636.3.56.1.2.9.1.1	INTEGER	read-only	A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 1.
jnxOtnTotalOtuFecEntry	1.3.6.1.4.1.2636.3.56.1.2.9.1		not-accessible	Performance data about ia 15 minute interface on this router
jnxOtnTotalOtuFecTable	1.3.6.1.4.1.2636.3.56.1.2.9		not-accessible	Information about ODU Performance monitoring for this interfaces on this router.
U32 jnxOtnTotalOtuFecUncorrectedWords	1.3.6.1.4.1.2636.3.56.1.2.9.1.3	Unsigned32	read-only	Interval 15 minute FEC UnCorrected Words counter in an OTN frame in the in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
U32 jnxOtnTotalOtuSES	1.3.6.1.4.1.2636.3.56.1.2.6.1.5	Unsigned32	read-only	Total (1 day) SES counter in an OTN OTU frame in the in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
jnxOtnTotalOtuTable	1.3.6.1.4.1.2636.3.56.1.2.6		not-accessible	Information about ODU Performance monitoring for this interfaces on this router.
U32 jnxOtnTotalOtuUAS	1.3.6.1.4.1.2636.3.56.1.2.6.1.6	Unsigned32	read-only	Total (1 day) counter in an OTN OTU frame in the in the previous 24 hour interval. Invalid 15 minute intervals count as 0.

RFC description

Manages OTN (Optical Transport Network) interface operations including alarms and performance metrics.

Start monitoring Juniper Networks router/switch with OTN-capable optical interfaces with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download JUNIPER-OTN-MIB

What Is JUNIPER-OTN-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description