Juniper-ES2-Registry

All MIBs › Juniper-ES2-Registry

Organization: Juniper Networks, Inc.

Last Updated: 2008-05-08

Category: Textual Conventions and Registries, Vendor: Juniper

Description: Defines the OID registration subtree and platform identifiers for Juniper Networks ES2-series router platforms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Juniper-ES2-Registry?

Juniper-ES2-Registry is a Juniper Networks OID registration MIB that defines the AutonomousType (OID) values used to identify physical entity types (entPhysicalVendorType) for Juniper's second-generation E-series router platforms. It is purely a naming/registry module rather than a data-bearing MIB; it enumerates identifiers for hardware modules and components so that other MIBs, particularly the standard ENTITY-MIB, can report which specific card, chassis, or module type is installed. Because entPhysicalVendorType values are the mechanism by which management systems recognize installed hardware, this registry indirectly supports hardware inventory monitoring, identifying exactly which line card, PIC, or chassis component is present, even though it exposes no live counters itself. It is explicitly dependent on the IETF ENTITY-MIB, whose entPhysicalVendorType object is populated using OIDs defined here. It is used internally by Juniper E-series edge routers whenever a network management station queries entPhysicalVendorType via ENTITY-MIB, drawing on the Juniper-ES2-Registry OID tree to identify the specific hardware module.

IPNetwork Monitor allows you to monitor SNMP objects defined in Juniper-ES2-Registry. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Juniper Networks E-series (ES2/ERX) edge router

Monitoring Examples

This module defines only OID identifiers (juniES2EntPhysicalType) rather than runtime data, so there is no direct polling scenario; a management station polling the standard ENTITY-MIB's entPhysicalVendorType on a Juniper E-series router would receive one of these OIDs, letting it translate the numeric value into a specific hardware module or chassis type for inventory reporting.

Imported Objects

From Juniper-Registry

juniAdmin

MODULE-IDENTITY

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Description
juniES2Registry	1.3.6.1.4.1.4874.4.2.3	Juniper second generation E-series product family system-specific object identification values. This module defines AutonomousType (OID) values for all the physical entity types (entPhysicalVendorType). This module will be updated whenever a new type of module or other hardware becomes available in second generation E-series systems.
juniES2EntPhysicalType	1.3.6.1.4.1.4874.4.2.3.1
es2Chassis	1.3.6.1.4.1.4874.4.2.3.1.1	The vendor type ID for a second generation E-series chassis. This identifies an 'overall' physical entity for any second generation E-series system.
e320BaseChassis	1.3.6.1.4.1.4874.4.2.3.1.1.1	E320 base chassis with 12 slots for line modules - includes chassis, midplane, DC PDU, and fan tray. The E320 system uses a carrier-class design with a passive midplane, active front-insert line modules(LM) and rear-insert input/output adapters(IOA).
e120BaseChassis	1.3.6.1.4.1.4874.4.2.3.1.1.2	E120 base chassis with 6 slots for line modules - includes chassis, midplane, DC PDU, and fan tray. The E120 system uses a carrier-class design with a passive midplane, active front-insert line modules(LM) and rear-insert input/output adapters(IOA).
es2FanAssembly	1.3.6.1.4.1.4874.4.2.3.1.2	The vendor type ID for a second generation E-series fan assembly.
e320PrimaryFanTray	1.3.6.1.4.1.4874.4.2.3.1.2.1	E320 fan tray with 8 fans.
e320AuxiliaryFanTray	1.3.6.1.4.1.4874.4.2.3.1.2.2	E320 fan tray with 8 fans.
e120PrimaryFanTray	1.3.6.1.4.1.4874.4.2.3.1.2.3	E120 fan tray with 9 fans.
es2PowerInput	1.3.6.1.4.1.4874.4.2.3.1.3	The vendor type ID for a second generation E-series power distribution module.
e320DcPowerDistributionUnit	1.3.6.1.4.1.4874.4.2.3.1.3.1	E320 DC power distribution unit (PDU).
es2Midplane	1.3.6.1.4.1.4874.4.2.3.1.4	The vendor type ID for a second generation E-series midplane.
e320Midplane	1.3.6.1.4.1.4874.4.2.3.1.4.1	E320 chassis midplane.
e120Midplane	1.3.6.1.4.1.4874.4.2.3.1.4.2	E120 chassis midplane.
es2SrpModule	1.3.6.1.4.1.4874.4.2.3.1.5	The vendor type ID for a second generation E-series system controller/ switch fabric module.
e320Srp100	1.3.6.1.4.1.4874.4.2.3.1.5.1	E320 100Gb SRP - The Switch Route Processor (SRP) is responsible for running the routing protocols as well as overall system control. The SRP also contains a switch fabric slice that is responsible for packet forwarding.
e320Srp320	1.3.6.1.4.1.4874.4.2.3.1.5.2	E320 320Gb SRP - The Switch Route Processor (SRP) is responsible for running the routing protocols as well as overall system control. The SRP also contains a switch fabric slice that is responsible for packet forwarding.
e120Srp120	1.3.6.1.4.1.4874.4.2.3.1.5.3	E120 120Gb SRP - The Switch Route Processor (SRP) is responsible for running the routing protocols as well as overall system control. The SRP also contains a switch fabric slice that is responsible for packet forwarding.
es2SwitchFabricModule	1.3.6.1.4.1.4874.4.2.3.1.6	The vendor type ID for a second generation E-series switch fabric module.
e320Sfm100	1.3.6.1.4.1.4874.4.2.3.1.6.1	E320 100Gb switch fabric module. The SFM functions include buffer management, queuing, scheduling and packet processing.
e320Sfm320	1.3.6.1.4.1.4874.4.2.3.1.6.2	E320 320Gb switch fabric module. The SFM functions include buffer management, queuing, scheduling and packet processing.
e120Sfm120	1.3.6.1.4.1.4874.4.2.3.1.6.3	E120 120Gb switch fabric module. The SFM functions include buffer management, queuing, scheduling and packet processing.
es2SrpIoa	1.3.6.1.4.1.4874.4.2.3.1.7	The vendor type ID for the system controller I/O adapter for a second generation E-series system.
e320SrpIoa	1.3.6.1.4.1.4874.4.2.3.1.7.1	E320 SRP IOA. This card provides clocking functions as well as management and alarm interfaces.
es2ForwardingModule	1.3.6.1.4.1.4874.4.2.3.1.8	The vendor type ID for a second generation E-series forwarding module.
es2Lm4	1.3.6.1.4.1.4874.4.2.3.1.8.1	E320 4Gb (series 1) line module. This Line Module supports both uplink and customer facing IOAs and is responsible for processing data traffic.
es2Lm10Uplink	1.3.6.1.4.1.4874.4.2.3.1.8.2	E320 10Gb (series 2) uplink line module. This Line Module is primarily focused on uplink IOAs and is responsible for processing data traffic.
es2Lm10	1.3.6.1.4.1.4874.4.2.3.1.8.3	E320 10Gb (series 3) line module. This Line Module supports both uplink and customer facing IOAs and is responsible for processing data traffic.
es2Lm10s	1.3.6.1.4.1.4874.4.2.3.1.8.4	E320 10Gb (series 4) line module. This Line Module supports both uplink and customer facing IOAs and is responsible for processing data traffic.
es2ForwardingIoa	1.3.6.1.4.1.4874.4.2.3.1.9	The vendor type ID for a second generation E-series I/O adapter for a forwarding module.
es2Ge4S1Ioa	1.3.6.1.4.1.4874.4.2.3.1.9.1	E320 GE-4 IOA. This is a series 1, half-height, single wide IOA with 4 physical interfaces that require pluggable GE interfaces. This IOA uses the full capacity of a Series 1 line module.
es2Oc48Stm16PosS1Ioa	1.3.6.1.4.1.4874.4.2.3.1.9.2	E320 OC48/STM16 POS IOA. This is a series 1, half-height, single wide IOA with 1 physical interface that requires a pluggable OC48/STM16 interface.
es2ServiceS1Ioa	1.3.6.1.4.1.4874.4.2.3.1.9.3	E320 service IOA. This is a series 1, full-height, single wide IOA and does not support any physical interfaces.
es2Oc3Stm1x8AtmS1Ioa	1.3.6.1.4.1.4874.4.2.3.1.9.4	E320 OC3/STM1-8 ATM IOA. This is a series 1, half-height, single wide IOA that supports 8 physical interfaces that require pluggable OC3/STM1 interfaces. This IOA can be combined with other half-height IOAs (except those that use the full capacity of a slot's bandwidth such as the GE-4 IOA).
es2RedundancyS1Ioa	1.3.6.1.4.1.4874.4.2.3.1.9.5	E320 redundancy IOA. This is a series 1, full-height, single wide IOA and does not support any physical interfaces.
es2Oc12Stm4x2PosS1Ioa	1.3.6.1.4.1.4874.4.2.3.1.9.6	E320 OC12/STM4-2 POS IOA. This is a series 1, half-height, single wide IOA that supports 2 physical interfaces that require pluggable OC12/STM4 interfaces. This IOA can be combined with other half-height IOAs (except those that use the full capacity of a slot's bandwidth such as the GE-4 IOA).
es2Oc12Stm4x2AtmS1Ioa	1.3.6.1.4.1.4874.4.2.3.1.9.7	E320 OC12/STM4-2 ATM IOA. This is a series 1, half-height, single wide IOA that supports 2 physical interfaces that require pluggable OC12/STM4 interfaces. This IOA can be combined with other half-height IOAs (except those that use the full capacity of a slot's bandwidth such as the GE-4 IOA).
es2dash10GeS1Ioa	1.3.6.1.4.1.4874.4.2.3.1.9.8	E320 10GE IOA. This is a series 1, full-height, single wide IOA that supports 2 physical interface that requires a pluggable 10GE interface.
es2Ge8S1Ioa	1.3.6.1.4.1.4874.4.2.3.1.9.9	E320 GE-8 IOA. This is a series 1, half-height, single wide IOA that supports 8 physical interfaces that require pluggable GE transceivers. This IOA will support a configuration of 8 active or 4 active + 4 standby interfaces.
es2dash10GePrS2Ioa	1.3.6.1.4.1.4874.4.2.3.1.9.10	E320 10GE IOA with port redundancy (PR). This is a series 2, full-height, single wide IOA that supports 2 physical interfaces (1 active + 1 standby) that require pluggable 10GE transceivers.
es2Ge20S2Ioa	1.3.6.1.4.1.4874.4.2.3.1.9.11	E320 GE-20 IOA. This is a series 2, full-height, single wide IOA that supports 20 physical interfaces that require pluggable GE transceivers. This IOA will support a configuration of 20 active or 10 active + 10 standby interfaces.

RFC description

Vendor-private MIB for Juniper Networks; enterprise SMI registration point for Juniper ES2 series devices and sub-trees.

Start monitoring Juniper Networks E-series (ES2/ERX) edge router, second generation (hardware OID registry) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Juniper-ES2-Registry

What Is Juniper-ES2-Registry?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description