Juniper-SONET-CONF

All MIBs › Juniper-SONET-CONF

Organization: Juniper Networks, Inc.

Last Updated: 2005-09-15

Category: Technology: Optical Transport, Vendor: Juniper

Description: Juniper Networks conformance statements for SONET/SDH interface management on Juniper E-series edge routers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Juniper-SONET-CONF?

Juniper-SONET-CONF is a Juniper Networks conformance/agent-capabilities MIB documenting which parts of the SNMP agent's SONET/SDH interface support are implemented on Juniper E-series edge routers. It does not define new managed objects for polling; instead it declares AGENT-CAPABILITIES groups, juniSonetBasicAgent and juniSonetVTAgent, describing support for basic SONET/SDH interface objects and Virtual Tributary (VT) level objects respectively. As a conformance module it has no runtime data of its own to expose for hardware/software status monitoring; its role is purely to state agent capability compliance. It depends directly on the IETF SONET-MIB, since its capability groups reference that MIB's object groups. It is used during network management tool integration/compliance checking on Juniper E-series routers equipped with SONET/SDH interfaces, not for day-to-day operational polling. Engineers can download the Juniper-SONET-CONF file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Juniper-SONET-CONF. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Juniper E-series routers (SONET/SDH interface modules)

Monitoring Examples

This is a conformance/AGENT-CAPABILITIES module rather than one exposing runtime data objects; juniSonetBasicAgent and juniSonetVTAgent simply declare which standard SONET-MIB object groups (basic and VT-level) the Juniper agent implements, so there is no monitoring scenario to describe.

Imported Objects

From Juniper-Agents

juniAgents

MODULE-IDENTITY

From SNMPv2-CONF

AGENT-CAPABILITIES

From SNMPv2-SMI

MODULE-IDENTITY

OIDs

OID symbolic	OID numeric	Description
juniSonetAgent	1.3.6.1.4.1.4874.5.2.40	The agent capabilities definitions for the SONET component of the SNMP agent in the Juniper E-series family of products.
juniSonetAgentV1	1.3.6.1.4.1.4874.5.2.40.1	The MIBs supported by the SNMP agent for the SONET application in JUNOSe. These capabilities became obsolete when support for the standard VT group was added.
juniSonetAgentV2	1.3.6.1.4.1.4874.5.2.40.2	The MIBs supported by the SNMP agent for the SONET application in JUNOSe. These capabilities became obsolete when support for the proprietary path and VT groups were added.
juniSonetAgentV3	1.3.6.1.4.1.4874.5.2.40.3	The MIBs supported by the SNMP agent for the SONET application in JUNOSe. These capabilities became obsolete when support for the RFC-2558 version of the SONET-MIB and far-end statistics were added.
juniSonetAgentV4	1.3.6.1.4.1.4874.5.2.40.4	The MIBs supported by the SNMP agent for the SONET application in JUNOSe. These capabilities became obsolete when Virtual Tributary (VT) support was searated out into a separate capabilities statement.
juniSonetBasicAgent	1.3.6.1.4.1.4874.5.2.40.5
juniSonetBasicAgentV1	1.3.6.1.4.1.4874.5.2.40.5.1	The MIB conformance groups supported by the SNMP agent for the SONET application in JUNOSe. These capabilities became obsolete when support was added for the Internet draft of the APS MIB.
juniSonetBasicAgentV2	1.3.6.1.4.1.4874.5.2.40.5.2	The MIB conformance groups supported by the SNMP agent for the SONET application in JUNOSe. These capabilities became obsolete when new medium and path controls were added.
juniSonetBasicAgentV3	1.3.6.1.4.1.4874.5.2.40.5.3	The MIB conformance groups supported by the SNMP agent for the SONET application in JUNOSe. These capabilities became obsolete when path event status and notification support was added.
juniSonetBasicAgentV4	1.3.6.1.4.1.4874.5.2.40.5.4	The MIB conformance groups supported by the SNMP agent for the SONET application in JUNOSe.
juniSonetBasicAgentV5	1.3.6.1.4.1.4874.5.2.40.5.5	The MIB conformance groups supported by the SNMP agent for the SONET application in JUNOSe.
juniSonetVTAgent	1.3.6.1.4.1.4874.5.2.40.6
juniSonetVTAgentV1	1.3.6.1.4.1.4874.5.2.40.6.1	The MIB conformance groups supported by the SNMP agent for the SONET application in JUNOSe.

RFC description

Agent capabilities for SONET component in Juniper E-series routers supporting path events and APS.

Start monitoring Juniper E-series router with SONET/SDH interface modules (agent capabilities) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Juniper-SONET-CONF

What Is Juniper-SONET-CONF?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description