| OID symbolic | OID numeric | Type | Access | Description |
|---|
| juniPppoeProfileMIB | 1.3.6.1.4.1.4874.2.2.46 | | | The point-to-point protocol over Ethernet (PPPoE) profile MIB for the
Juniper enterprise. |
| juniPppoeProfileObjects | 1.3.6.1.4.1.4874.2.2.46.1 | | | |
| juniPppoeProfile | 1.3.6.1.4.1.4874.2.2.46.1.1 | | | |
| juniPppoeProfileTable | 1.3.6.1.4.1.4874.2.2.46.1.1.1 | | not-accessible | This table contains profiles for configuring PPPoE interfaces/sessions.
Entries in this table are created/deleted as a side-effect of
corresponding operations to the juniProfileNameTable in the
Juniper-PROFILE-MIB. |
| juniPppoeProfileEntry | 1.3.6.1.4.1.4874.2.2.46.1.1.1.1 | | not-accessible | A profile describing configuration of a PPPoE interface and its
subinterfaces (sessions). |
| U32 juniPppoeProfileId | 1.3.6.1.4.1.4874.2.2.46.1.1.1.1.1 | Unsigned32 | not-accessible | The integer identifier associated with this profile. A value for this
identifier is determined by locating or creating a profile name in the
juniProfileNameTable. |
| JUN juniPppoeProfileSetMap | 1.3.6.1.4.1.4874.2.2.46.1.1.1.1.2 | JuniSetMap | read-write | A bitmap representing which objects in this entry have been explicitly
configured. See the definition of the JuniSetMap TEXTUAL-CONVENTION for
details of use.
The INDEX object(s) and this object are excluded from representation
(i.e. their bits are never set).
When a SET request does not explicitly configure JuniSetMap, bits in
JuniSetMap are set as a side-effect of configuring other profile
attributes in the same entry.
If, however, a SET request explicitly configures JuniSetMap, the
explicitly configured value overrides 1) any previous bit settings, and
2) any simultaneous 'side-effect' settings that would otherwise occur.
Once set, bits can only be cleared by explicitly configuring
JuniSetMap. |
| I32 juniPppoeProfileMaxNumSessions | 1.3.6.1.4.1.4874.2.2.46.1.1.1.1.3 | Integer32 | read-write | The maximum number of PPPoE sessions (subinterfaces) that can be
configured on the main PPPoE interface created using this profile. A
value of zero indicates no bound is configured. |
| STR juniPppoeProfileSubMotm | 1.3.6.1.4.1.4874.2.2.46.1.1.1.1.4 | DisplayString | read-write | A message to send via a PADM on the sub-interface when this profile is
applied to the IP interface above this PPPoE sub- interface. A client
may choose to display this message to the user. |
| STR juniPppoeProfileSubUrl | 1.3.6.1.4.1.4874.2.2.46.1.1.1.1.5 | DisplayString | read-write | A URL to be sent via a PADM on the sub-interface when this profile is
applied to the IP interface above this PPPoE sub-interface. The string
entered here can have several substitutions applied:
%D is replaced with the profile name
%d is replaced with the domain name
%u is replaced with the user name
%U is replaced with the user/domain name together
%% is replaced with the % character
The resulting string must not be greater than 127 octets long. The
client may use this URL as the initial web-page for the user. |
| JUN juniPppoeProfileDupProtect | 1.3.6.1.4.1.4874.2.2.46.1.1.1.1.6 | JuniEnable | read-write | Flag to control whether duplicate MAC addresses are allowed |
| STR juniPppoeProfileAcName | 1.3.6.1.4.1.4874.2.2.46.1.1.1.1.7 | DisplayString | read-write | The name to use for the AC-NAME tag that is sent in any PADO that is
sent on this interface. |
| JUN juniPppoeProfilePadiFlag | 1.3.6.1.4.1.4874.2.2.46.1.1.1.1.8 | JuniEnable | read-write | The PPPoE major interface parameter PADI flag controls whether to
always repsond to a PADI with a PADO regardless of the ability to create
the session and allow the session establish phase to resolve it. |
| JUN juniPppoeProfilePacketTrace | 1.3.6.1.4.1.4874.2.2.46.1.1.1.1.9 | JuniEnable | read-write | The PPPoE major interface parameter packet tracing flag controls
whether packet tracing is enable or not. |
| STR juniPppoeProfileServiceNameTableName | 1.3.6.1.4.1.4874.2.2.46.1.1.1.1.10 | DisplayString | read-write | The PPPoE Service name table controls behavior of PADO control
packets. |
| JUN juniPppoeProfilePadrRemoteCircuitIdCapture | 1.3.6.1.4.1.4874.2.2.46.1.1.1.1.11 | JuniEnable | read-write | The PPPoE major interface parameter PADR remote circuit id capture flag
controls whether the remote circuit id string possibly contained
in the PADR packet will be saved and used by AAA to replace the NAS-PORT-ID
field. |
| I32 juniPppoeProfileMtu | 1.3.6.1.4.1.4874.2.2.46.1.1.1.1.12 | Integer32 | read-write | The initial Maximum Transmit Unit (MTU) that the PPPoE major interface
entity will advertise to the remote entity.
If the value of this variable is 1 then the local PPPoE entity will
use an MTU value determined by its underlying media interface.
If the value of this variable is 2 then the local PPPoE entity will
use a value determined by the PPPoE Max-Mtu-Tag transmitted from the
client in the PADR packet. If no Max-Mtu-Tag is received, the value
defaults to a maximum of 1494.
The operational MTU is limited by the MTU of the underlying media
interface minus the PPPoE frame overhead. |
| INT juniPppoeProfileMaxSessionOverride | 1.3.6.1.4.1.4874.2.2.46.1.1.1.1.13 | INTEGER | read-write | Configure the action to be taken by PPPoE when RADIUS server returns
the PPPoE max-session value:
override Override the current PPPoE max-session value with the
value returned by RADIUS server
Ignore Ignore the max-session value returned by RADIUS server |
| juniPppoeProfileConformance | 1.3.6.1.4.1.4874.2.2.46.4 | | | |
| juniPppoeProfileCompliances | 1.3.6.1.4.1.4874.2.2.46.4.1 | | | |
| juniPppoeProfileCompliance | 1.3.6.1.4.1.4874.2.2.46.4.1.1 | | | Obsolete compliance statement for entities which implement the Juniper
PPPoE Profile MIB. This statement became obsolete when the duplicate
MAC address indicator and AC-NAME tag were added. |
| juniPppoeCompliance2 | 1.3.6.1.4.1.4874.2.2.46.4.1.2 | | | Obsolete compliance statement for entities which implement the Juniper
PPPoE profile MIB. This statement became obsolete when PADI flag,
AC-name and packet trace objects were added. |
| juniPppoeCompliance3 | 1.3.6.1.4.1.4874.2.2.46.4.1.3 | | | Obsolete compliance statement for entities which implement the Juniper
PPPoE profile MIB. This statement became obsolete when the service
name table was added. |
| juniPppoeCompliance4 | 1.3.6.1.4.1.4874.2.2.46.4.1.4 | | | Obsolete compliance statement for entities which implement the Juniper
PPPoE profile MIB. This statement became obsolete when the remote
circuit id capture was added. |
| juniPppoeCompliance5 | 1.3.6.1.4.1.4874.2.2.46.4.1.5 | | | Obsolete compliance statement for entities which implement the Juniper
PPPoE MIB. This statement became obsolete when support was added for
MTU configuration. |
| juniPppoeCompliance6 | 1.3.6.1.4.1.4874.2.2.46.4.1.6 | | | Obsolete compliance statement for entities which implement the Juniper
PPPoE MIB. This statement became obsolete when support was added for
juniPppoeProfileMaxSessionOverride. |
| juniPppoeCompliance7 | 1.3.6.1.4.1.4874.2.2.46.4.1.7 | | | The compliance statement for entities which implement the Juniper PPPoE
Profile MIB. |
| juniPppoeProfileGroups | 1.3.6.1.4.1.4874.2.2.46.4.2 | | | |
| juniPppoeProfileGroup | 1.3.6.1.4.1.4874.2.2.46.4.2.1 | | | Obsolete collection of objects providing management of profile
functionality for PPPoE interfaces in a Juniper product. This group
became obsolete when the duplicate MAC address indicator and AC-NAME tag
objects were added. |
| juniPppoeProfileGroup2 | 1.3.6.1.4.1.4874.2.2.46.4.2.2 | | | Obsolete collection of objects providing management of profile
functionality for PPPOE interfaces in a Juniper product. This group
became obsolete when PADI flag, AC-name and packet trace objects were
added. |
| juniPppoeProfileGroup3 | 1.3.6.1.4.1.4874.2.2.46.4.2.3 | | | A collection of objects providing management of profile functionality
for PPPOE interfaces in a Juniper product. |
| juniPppoeProfileGroup4 | 1.3.6.1.4.1.4874.2.2.46.4.2.4 | | | A collection of objects providing management of profile functionality
for PPPOE interfaces in a Juniper product. |
| juniPppoeProfileGroup5 | 1.3.6.1.4.1.4874.2.2.46.4.2.5 | | | A collection of objects providing management of profile functionality
for PPPOE interfaces in a Juniper product. |
| juniPppoeProfileGroup6 | 1.3.6.1.4.1.4874.2.2.46.4.2.6 | | | A collection of objects providing management of profile functionality
for PPPOE interfaces in a Juniper product. |
| juniPppoeProfileGroup7 | 1.3.6.1.4.1.4874.2.2.46.4.2.7 | | | A collection of objects providing management of profile functionality
for PPPOE interfaces in a Juniper product. |
