All MIBs › Juniper-L2TP-Dialout-Generator-CONF
Organization: Juniper Networks, Inc.
Last Updated: 2002-11-21
Category: Protocol: L2TP, Vendor: Juniper
Description: Provides conformance definitions for L2TP dialout call generation management on Juniper Networks E-series platforms.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is Juniper-L2TP-Dialout-Generator-CONF?
Juniper-L2TP-Dialout-Generator-CONF is an AGENT-CAPABILITIES conformance module for the L2TP (Layer 2 Tunneling Protocol) Dialout Call Generator component of the SNMP agent on Juniper Networks E-series routing platforms. As a conformance module it does not define runtime data objects itself; instead it declares which OBJECT-GROUPs and NOTIFICATION-GROUPs from the associated L2TP Dialout Generator MIB the Juniper E-series agent implements, and at what level of support. Because it carries no pollable objects, it has no direct role in reporting hardware/software status such as uptime, temperature, or CPU load — its purpose is purely to describe agent feature-support for management-station capability negotiation. It inherently depends on the corresponding base L2TP Dialout Generator MIB module whose object/notification groups it references. It is typically used by network management systems during MIB compilation/capability discovery against Juniper E-series routers to determine which L2TP dialout-generation features are supported before attempting to configure or monitor them. Engineers can download the Juniper-L2TP-Dialout-Generator-CONF file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in Juniper-L2TP-Dialout-Generator-CONF. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Juniper Networks E-series router
Monitoring Examples
This is a conformance/AGENT-CAPABILITIES module with no runtime data objects of its own, so no realistic monitoring scenario applies; it exists solely to enumerate the object and notification groups from the base L2TP Dialout Generator MIB that the Juniper E-series agent supports, for use by NMS tools during capability negotiation.
Imported Objects
From Juniper-Agents
| juniAgents | MODULE-IDENTITY |
From SNMPv2-CONF
| AGENT-CAPABILITIES |
From SNMPv2-SMI
| MODULE-IDENTITY |
OIDs
RFC description
Defines SNMP agent capabilities for Layer 2 Tunneling Protocol dialout generation on Juniper E-series products.
Start monitoring Juniper Networks E-series router (agent capabilities, L2TP Dialout Generator) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.