All MIBs › JUNIPER-LSYSSP-NATSTATICRULE-MIB
Organization: Juniper Networks, Inc.
Last Updated: 2010-05-19
Category: Vendor: Juniper
Description: Defines managed objects for NAT static rule resource limits per logical system security profile on Juniper Networks SRX devices.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is JUNIPER-LSYSSP-NATSTATICRULE-MIB?
JUNIPER-LSYSSP-NATSTATICRULE-MIB is a Juniper Networks MIB for SRX series security devices, specifically covering NAT static-rule resource limits within Logical Systems (LSYS) security profiles. It exposes configuration and utilization data around NAT static-rule quotas assigned to logical systems, letting operators see how many static NAT rule resources are provisioned versus consumed per logical system. This is primarily a configuration/resource-quota monitoring module rather than a hardware health module, but it directly supports monitoring of software resource status — flagging when a logical system approaches or exceeds its NAT static-rule limit, which can cause provisioning failures. The module description explicitly ties it to the broader Juniper LSYS security profile framework, indicating dependency on related Juniper LSYS resource-management MIBs. It is typically deployed in multi-tenant or virtualized Juniper SRX firewall environments where logical systems partition NAT resources among tenants or departments, and administrators can download the JUNIPER-LSYSSP-NATSTATICRULE-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in JUNIPER-LSYSSP-NATSTATICRULE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Juniper Networks SRX series security device (Logical Systems)
Monitoring Examples
An operator would poll the per-logical-system NAT static-rule resource objects (following the naming pattern implied by this MIB, e.g. a static-rule limit/usage table keyed by logical system) to check whether a tenant's logical system is nearing its provisioned static NAT rule quota. A count approaching the configured maximum would warn of impending NAT rule provisioning failures for that logical system. No concrete sample object names were provided in the source data, so exact table/column names are inferred from the module description rather than confirmed.
What Can Be Monitored
- NAT static rule resource quota
- NAT static rule usage count
- per-logical-system resource limits
- resource exhaustion warnings
Imported Objects
From JUNIPER-LSYS-SECURITYPROFILE-MIB
| jnxLsysSpNATstaticrule | OBJECT-IDENTITY |
From SNMPv2-SMI
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DisplayString |
OIDs
RFC description
Monitors NAT static rule resource consumption and quotas per logical system in Juniper security profiles.
Start monitoring Juniper SRX series security device (logical-system NAT static-rule quota) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.